Scribd
Upload
1K views1 page

Revised Pump Curve For 110 Percent Shutoff To Rated Head Ratio EPC72262

This document provides specifications for a Patterson pump including: - Rated flow of 454 cubic meters per hour at 125 meters head - 150% rated flow of 681 cubic meters per hour at 81.25 meters head - Maximum rated power of 291 kilowatts at 1780 revolutions per minute - Pump performance curve showing total head, efficiency, brake horsepower, and net positive suction head required over a range of flows

Uploaded by

souren1975
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Revised Pump Curve For 110 Percent Shutoff To Rated Head Ratio EPC72262

This document provides specifications for a Patterson pump including: - Rated flow of 454 cubic meters per hour at 125 meters head - 150% rated flow of 681 cubic meters per hour at 81.25 meters head - Maximum rated power of 291 kilowatts at 1780 revolutions per minute - Pump performance curve showing total head, efficiency, brake horsepower, and net positive suction head required over a range of flows

Uploaded by

souren1975
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

`

CONDITION M3/HR M
RATED 454 125 10x8x23A SSC
150% 681 81.25
1500 GPM 138 to 285 psi, (319' to 658')
2000 GPM 127 to 282 psi, (293' to 651')
IMPELLER C02-80618
PATTERSON PUMP COMPANY NOL (MAX) POWER
A Gorman-Rupp Company Phone: (706) 886-2101 291 KW CURVE No. EPC72262
Post Office Box 790 www.pattersonpumps.com
Toccoa, Georgia 30577 U.S.A.
1780 RPM

597 MM
UL / FM APPROVED 700
210 54% 59% 64% 69%
74%
76.5% 600
180
PUMP TOTAL HEAD (M)

74%
150 500
* 494 MM 69%

PUMP TOTAL HEAD (FT)


64%
120 400
59%
441 MM
90 MINIMUM FLOW 300
71.2%

60 200
* ACTUAL IMPELLER DIAMETER
& SHUT-OFF HEAD DETERMINED
30 16 BY TESTING. 100
NPSHR (M)

8 NPSHR
PUMP INPUT POWER (KW)

PUMP INPUT POWER (HP)


1000 0
1200

800
500
597 MM 400

0 441 MM 0

M3/HR 0 200 400 600 800 1000 1200

0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000
GPM
* SHUT-OFF HEAD = 137.5 M
SPECIFIC GRAVITY = 1.000
140% RATED HEAD = 175 M

You might also like