Bearing Tolerance

ISO tolerances
Basic Internal dimensions Externall dimensions
sizes
(over) - to E7 E8 F7 H7 g6 h8 h11 h13 h14 js13 r7 r8 IT9 IT10

-3 +24 +28 +16 +10 -2 0 0 0 0 +70 +20 +24 25 40

+14 +14 +6 0 -8 -14 -60 -140 -250 -70 +10 +10

(3)-6 +32 +38 +22 +12 -4 0 0 0 0 +90 +27 +33 30 48

+20 +20 +10 0 -12 -18 -75 -180 -300 -90 +15 +15

(6)-10 +40 +47 +28 +15 -5 0 0 0 0 +110 +34 +41 36 58

+25 +25 +13 0 -14 -22 -90 -220 -360 -110 +19 +19

(10)-18 +50 +59 +34 +18 -6 0 0 0 0 +135 +41 +50 43 70

+32 +32 +16 0 -17 -27 -110 -270 -430 -135 +23 +23

(18)-30 +61 +73 +41 +21 -7 0 0 0 0 +165 +49 +61 52 84

+40 +40 +20 0 -20 -33 -130 -330 -520 -165 +28 +28

(30)-50 +75 +89 +50 +25 -9 0 0 0 0 +195 +59 +73 62 100

+50 +50 +25 0 -25 -39 -160 -390 -620 -195 +34 +34

(50)-65 +71 +87

+90 +106 +60 +30 -10 0 0 0 0 +230 +41 +41 74 120
+60 +60 +30 0 -29 -46 -190 -460 -740 -230
(65)-80 +73 +89
+43 +43

(80)-100 +86 +105

+107 +126 +71 +35 -12 0 0 0 0 +270 +51 +51 87 140
+72 +72 36 0 -34 -54 -220 -540 -870 -270
(100)-120 +89 +108
+54 +54

Stock sizes
Most sizes corresponding to ISO 2795 are avail-
able from stock.

Special sizes
Many special sizes and tolerances can be manu-
factured from existing tooling by special order.

Tolerances
The sketches to the left show the normal toler-
ances for self-lubricating standard bearings.
Exceptions: )
Length tolerance h14 for bearings with wall
thickness t<2mm.
ESSEM Graphite-Bronze diameter tolerances
dE8/Dr8, length tolerance h14, radial run-out
IT 10 TIR.
Any deviation from these standards must be
specified in enquiries and orders.

Ametric American Metric® Corporation

® 030604
538
 Metric Sleeve Bearing
DIN 1850 Form J Sinterbronze
Oil Impregnated Bronze
ASTM: B-438-73 Gr 1 Type II

Part No. ID OD L Part No. ID OD L Part No. ID OD L Part No. ID OD L

1.5-4x7 1.5 4 7 5-12x10 5 12 10 8-12x16 8 12 16 10-16x15 10 16 15

8-12x20 8 12 20 10-16x16 10 16 16
2-4x4 2 4 4 6-8x8 6 8 8 8-12x24 8 12 24 10-16x20 10 16 20
10-16x25 10 16 25
2-5x2 2 5 2 6-9x4 6 9 4 8-13x10 8 13 10 10-16x30 10 16 30
2-5x3 2 5 3 6-9x6 6 9 6 10-16x32 10 16 32
6-9x8 6 9 8 8-13.5x9 8 13.5 9
2.5-6x8 2.5 6 8 6-9x10 6 9 10 10-20x30 10 20 30
6-9x12 6 9 12 8-14x8 8 14 8
3-6x4 3 6 4 6-9x15 6 9 15 8-14x12 8 14 12 10-22x20 10 22 20
3-6x5 3 6 5 6-9x16 6 9 16 8-14x14 8 14 14
3-6x6 3 6 6 6-9x18 6 9 18 8-14x16 8 14 16 11-14x12.5 11 14 12.5
3-6x10 3 6 10 8-14x20 8 14 20
6-10x4 6 10 4 12-14x9 12 14 9
3-8x4 3 8 4 6-10x6 6 10 6 8-16x10 8 16 10 12-14x12 12 14 12
3-8x6 3 8 6 6-10x10 6 10 10 8-16x25 8 16 25 12-14x14 12 14 14
6-10x12 6 10 12 12-14x16 12 14 16
4-6x10 4 6 10 6-10x14 6 10 14 8-18x16 8 18 16
4-6x17 4 6 17 6-10x16 6 10 16 12-15x8 12 15 8
9-12x6 9 12 6 12-15x12 12 15 12
4-7x4 4 7 4 6-12x6 6 12 6 9-12x10 9 12 10 12-15x12.8 12 15 12.8
4-7x8 4 7 8 6-12x8 6 12 8 9-12x14 9 12 14 12-15x15 12 15 15
4-7x10 4 7 10 6-12x10 6 12 10 9-12x15 9 12 15 12-15x16 12 15 16
4-7x12 4 7 12 6-12x11 6 12 11 9-12x18 9 12 18 12-15x18 12 15 18
4-7x16 4 7 16 6-12x12 6 12 12 12-15x20 12 15 20
6-12x15 6 12 15 9-13x10 9 13 10 12-15x25 12 15 25
4-8x4 4 8 4 6-12x16 6 12 16
4-8x6 4 8 6 6-12x25 6 12 25 9-14x8 9 14 8 12-16x8 12 16 8
4-8x8 4 8 8 9-14x16 9 14 16 12-16x12 12 16 12
4-8x10 4 8 10 6-14x12 6 14 12 12-16x15 12 16 15
4-8x12 4 8 12 10-12x10 10 12 10 12-16x16 12 16 16
7-9x14 7 9 14 10-12x11 10 12 11 12-16x20 12 16 20
4-10x8 4 10 8 10-12x20 10 12 20 12-16x25 12 16 25
4-10x10 4 10 10 7-10x5 7 10 5 12-16x27 12 16 27
7-10x8 7 10 8 10-13x10 10 13 10 12-16x30 12 16 30
4-12x8 4 12 8 7-10x10 7 10 10 10-13x12 10 13 12
10-13x16 10 13 16 12-17x10 12 17 10
5-7x7 5 7 7 7-11x8 7 11 8 10-13x18 10 13 18 12-17x12 12 17 12
7-11x13 7 11 13 10-13x20 10 13 20 12-17x16 12 17 16
5-8x5 5 8 5 7-11x14 7 11 14 10-13x25 10 13 25 12-17x18 12 17 18
5-8x8 5 8 8 12-17x20 12 17 20
5-8x10 5 8 10 7-13x22 7 13 22 10-14x8 10 14 8 12-17x21 12 17 21
5-8x12 5 8 12 10-14x10 10 14 10 12-17x25 12 17 25
5-8x15 5 8 15 7-14x10 7 14 10 10-14x14 10 14 14
5-8x16 5 8 16 10-14x15 10 14 15 12-18x8 12 18 8
8-10x8 8 10 8 10-14x16 10 14 16 12-18x10 12 18 10
5-9x4 5 9 4 8-11x6 8 11 6 10-14x18 10 14 18 12-18x12 12 18 12
5-9x5 5 9 5 8-11x8 8 11 8 10-14x20 10 14 20 12-18x16 12 18 16
5-9x8 5 9 8 8-11x12 8 11 12 10-14x25 10 14 25 12-18x18 12 18 18
5-9x9 5 9 9 8-11x16 8 11 16 12-18x20 12 18 20
5-9x11 5 9 11 8-11x20 8 11 20 10-15x10 10 15 10 12-18x25 12 18 25
10-15x16 10 15 16 12-18x30 12 18 30
5-10x5 5 10 5 8-12x6 8 12 6 10-15x20 10 15 20
5-10x6 5 10 6 8-12x8 8 12 8 10-15x25 10 15 25 12-20x16 12 20 16
5-10x8 5 10 8 8-12x10 8 12 10
5-10x10 5 10 10 8-12x12 8 12 12 10-16x8 10 16 8 12-24x30 12 24 30
5-10x14 5 10 14 8-12x14 8 12 14 10-16x10 10 16 10

Tolerance: Tolerances may vary for some sizes due to different Note: Inquire for additional standard and non-standard
molds available at time of manufacture. sizes. Cast bronze and steel bushings also available
by special request.

Part No. = ID - OD x LENGTH

Ametric American Metric® Corporation

1-077 - 90513 GROUP: 077 ®

539
 Metric Sleeve Bearing
DIN 1850 Form J Sinterbronze
Oil Impregnated Bronze
ASTM: B-438-73 Gr 1 Type II

Part No. ID OD L Part No. ID OD L Part No. ID OD L Part No. ID OD L

12-25x25 12 25 25 15-22x15 15 22 15 18-24x24 18 24 24 20-28x16 20 28 16

15-22x16 15 22 16 18-24x25 18 24 25 20-28x20 20 28 20
13-16x19 13 16 19 15-22x20 15 22 20 18-24x28 18 24 28 20-28x25 20 28 25
15-22x22 15 22 22 18-24x30 18 24 30 20-28x28 20 28 28
14-18x10 14 18 10 15-22x25 15 22 25 18-24x36 18 24 36 20-28x30 20 28 30
14-18x14 14 18 14 15-22x30 15 22 30 18-24x40 18 24 40 20-28x32 20 28 32
14-18x15 14 18 15 20-28x40 20 28 40
14-18x18 14 18 18 15-24x30 15 24 30 18-25x16 18 25 16
14-18x19 14 18 19 18-25x20 18 25 20 20-30x20 20 30 20
14-18x20 14 18 20 15-25x18 15 25 18 18-25x22 18 25 22 20-30x30 20 30 30
14-18x22 14 18 22 18-25x28 18 25 28 20-30x45 20 30 45
14-18x26 14 18 26 15-30x30 15 30 30 18-25x30 18 25 30
14-18x28 14 18 28 20-40x40 20 40 40
16-18x22 16 18 22 18-25x36 18 25 36
14-20x10 14 20 10 22-25x20 22 25 20
14-20x12 14 20 12 16-19x14.2 16 19 14.2 18-28x40 18 28 40 22-25x35 22 25 35
14-20x14 14 20 14 16-19x19 16 19 19
14-20x15 14 20 15 18-35x30 18 35 30 22-26x22 22 26 22
14-20x18 14 20 18 16-20x12 16 20 12 22-26x26 22 26 26
14-20x20 14 20 20 16-20x16 16 20 16 19-25x25 19 25 25 22-26x28 22 26 28
14-20x22 14 20 22 16-20x20 16 20 20
14-20x25 14 20 25 16-20x25 16 20 25 20-23x24 20 23 24 22-27x15 22 27 15
14-20x28 14 20 28 16-20x28 16 20 28 22-27x18 22 27 18
14-20x30 14 20 30 16-20x30 16 20 30 20-24x16 20 24 16 22-27x20 22 27 20
16-20x32 16 20 32 20-24x20 20 24 20 22-27x22 22 27 22
14-28x30 14 28 30 16-20x45 16 20 45 20-24x24 20 24 24 22-27x25 22 27 25
20-24x25 20 24 25 22-27x28 22 27 28
15-17x20 15 17 20 16-22x12 16 22 12 20-24x27 20 24 27 22-27x36 22 27 36
16-22x16 16 22 16 20-24x30 20 24 30
15-18x12 15 18 12 16-22x20 16 22 20 20-24x32 20 24 32 22-28x18 22 28 18
15-18x20 15 18 20 16-22x22 16 22 22 22-28x20 22 28 20
15-18x22 15 18 22 16-22x25 16 22 25 20-25x15 20 25 15 22-28x22 22 28 22
15-19x10 15 19 10 16-22x30 16 22 30 20-25x16 20 25 16 22-28x28 22 28 28
15-19x15 15 19 15 16-22x32 16 22 32 20-25x20 20 25 20 22-28x30 22 28 30
15-19x16 15 19 16 16-22x45 16 22 45 20-25x22 20 25 22 22-28x36 22 28 36
15-19x20 15 19 20 20-25x25 20 25 25 22-28x40 22 28 40
15-19x25 15 19 25 16-32x30 16 32 30 20-25x28 20 25 28
15-19x32 15 19 32 20-25x30 20 25 30 22-29x18 22 29 18
17-21x22 17 21 22 20-25x32 20 25 32 22-29x19 22 29 19
15-20x10 15 20 10 17-21x32 17 21 32 20-25x34 20 25 34 22-29x22 22 29 22
15-20x12 15 20 12 20-25x35 20 25 35 22-29x28 22 29 28
15-20x15 15 20 15 17-22x17 17 22 17 20-25x40 20 25 40 22-29x36 22 29 36
15-20x20 15 20 20
15-20x24 15 20 24 17-25x25 17 25 25 20-26x15 20 26 15 22-30x40 22 30 40
15-20x25 15 20 25 20-26x16 20 26 16
15-20x28 15 20 28 18-22x12 18 22 12 20-26x20 20 26 20 22-32x20 22 32 20
15-20x30 15 20 30 18-22x18 18 22 18 20-26x25 20 26 25 22-32x30 22 32 30
15-20x36 15 20 36 18-22x22 18 22 22 20-26x26 20 26 26 22-32x45 22 32 45
18-22x28 18 22 28 20-26x30 20 26 30
15-21x10 15 21 10 18-22x30 18 22 30 20-26x32 20 26 32 24-28x30 24 28 30
15-21x15 15 21 15 18-22x36 18 22 36 20-26x40 20 26 40
15-21x16 15 21 16 18-22x40 18 22 40 24-30x30 24 30 30
15-21x20 15 21 20 20-27x16 20 27 16
15-21x21 15 21 21 18-24x12 18 24 12 20-27x20 20 27 20 25-30x20 25 30 20
15-21x25 15 21 25 18-24x17 18 24 17 20-27x25 20 27 25 25-30x25 25 30 25
15-21x30 15 21 30 18-24x18 18 24 18 20-27x32 20 27 32 25-30x28 25 30 28
15-21x32 15 21 32 18-24x22 18 24 22 25-30x30 25 30 30

Tolerance: Tolerances may vary for some sizes due to different Note: Inquire for additional standard
molds available at time of manufacture. and non-standard sizes. Cast bronze
and steel bushings also available by
special request.
Part No. = ID - OD x LENGTH

Ametric American Metric® Corporation

® GROUP: 077 1-077 - 90513
540
 Metric Sleeve Bearing
DIN 1850 Form J Sinterbronze
Oil Impregnated Bronze
ASTM: B-438-73 Gr 1 Type II

Part No. ID OD L Part No. ID OD L Part No. ID OD L Part No. ID OD L

25-30x32 25 30 32 30-35x40 30 35 40 35-44x22 35 44 22

25-30x35 25 30 35 30-35x43 30 35 43 35-44x28 35 44 28 45-52x40 45 52 40
25-30x40 25 30 40 35-44x35 35 44 35
25-30x45 25 30 45 30-38x15 30 38 15 45-55x35 45 55 35
25-30x50 25 30 50 30-38x20 30 38 20 35-45x25 35 45 25 45-55x40 45 55 40
30-38x24 30 38 24 35-45x35 35 45 35 45-55x45 45 55 45
25-32x20 25 32 20 30-38x25 30 38 25 35-45x40 35 45 40 45-55x50 45 55 50
25-32x25 25 32 25 30-38x30 30 38 30 35-45x45 35 45 45 45-55x55 45 55 55
25-32x30 25 32 30 30-38x38 30 38 38 35-45x50 35 45 50 45-55x60 45 55 60
25-32x32 25 32 32 30-38x40 30 38 40 35-45x70 35 45 70 45-55x65 45 55 65
25-32x35 25 32 35 30-38x45 30 38 45 45-55x75 45 55 75
25-32x40 25 32 40 30-38x50 30 38 50 35-50x50 35 50 50
30-38x60 30 38 60 45-56x28 45 56 28
25-35x15 25 35 15 36-42x22 36 42 22 45-56x36 45 56 36
25-35x20 25 35 20 30-40x25 30 40 25 36-42x28 36 42 28 45-56x45 45 56 45
25-35x25 25 35 25 30-40x30 30 40 30 36-42x36 36 42 36 45-56x56 45 56 56
25-35x35 25 35 35 30-40x40 30 40 40 36-42x45 36 42 45
25-35x38 25 35 38 30-40x45 30 40 45 45-65x80 45 65 80
25-35x40 25 35 40 30-40x50 30 40 50 36-45x22 36 45 22
25-35x50 25 35 50 30-40x60 30 40 60 36-45x28 36 45 28 50-54x45 50 54 45
36-45x36 36 45 36
25-36x50 25 36 50 30-41x55 30 41 55 36-45x45 36 45 45 50-56x32 50 56 32
50-56x40 50 56 40
25-45x35 25 45 35 30-50x60 30 50 60 36-50x50 36 50 50 50-56x50 50 56 50
50-56x63 50 56 63
26-30x40 26 30 40 32-35x40 32 35 40 38-44x25 38 44 25
38-44x35 38 44 35 50-60x32 50 60 32
26-35x45 26 35 45 32-38x20 32 38 20 38-44x45 38 44 45 50-60x35 50 60 35
32-38x25 32 38 25 38-44x50 38 44 50 50-60x40 50 60 40
28-32x22 28 32 22 32-38x28 32 38 28 50-60x50 50 60 50
28-32x28 28 32 28 32-38x32 32 38 32 40-30x36 40 30 36 50-60x60 50 60 60
28-32x30 28 32 30 32-38x40 32 38 40 50-60x63 50 60 63
28-32x36 28 32 36 32-38x50 32 38 50 40-45x50 40 45 50 50-60x70 50 60 70
28-32x45 28 32 45 50-60x75 50 60 75
32-40x20 32 40 20 40-46x25 40 46 25 50-60x100 50 60 100
28-33x22 28 33 22 32-40x25 32 40 25 40-46x30 40 46 30
28-33x28 28 33 28 32-40x32 32 40 32 40-46x32 40 46 32 50-70x70 50 70 70
28-33x36 28 33 36 32-40x40 32 40 40 40-46x40 40 46 40
28-33x45 28 33 45 32-40x50 32 40 50 40-46x50 40 46 50 55-65x40 55 65 40
55-65x55 55 65 55
28-35x32 28 35 32 32-45x50 32 45 50 40-50x25 40 50 25 55-65x60 55 65 60
40-50x30 40 50 30 55-65x65 55 65 65
28-36x22 28 36 22 34-40x50 34 40 50 40-50x32 40 50 32 55-65x70 55 65 70
28-36x28 28 36 28 40-50x35 40 50 35
28-36x36 28 36 36 35-40x30 35 40 30 40-50x40 40 50 40 55-66x56 55 66 56
28-36x45 28 36 45 35-40x35 35 40 35 40-50x50 40 50 50
35-40x40 35 40 40 40-50x60 40 50 60 55-70x70 55 70 70
28-40x50 28 40 50 35-40x45 35 40 45 40-50x80 40 50 80
60-68x50 60 68 50
30-33x35 30 33 35 35-41x25 35 41 25 40-60x60 40 60 60 60-68x60 60 68 60
30-33x45 30 33 45 35-41x35 35 41 35 60-68x70 60 68 70
35-41x40 35 41 40 45-51x28 45 51 28
30-35x15 30 35 15 45-51x35 45 51 35 60-70x50 60 70 50
30-35x20 30 35 20 35-42x35 35 42 35 45-51x36 45 51 36 60-70x60 60 70 60
30-35x25 30 35 25 35-42x42 35 42 42 45-51x45 45 51 45 60-70x90 60 70 90
30-35x30 30 35 30 35-42x50 35 42 50 45-51x55 45 51 55 60-70x120 60 70 120
30-35x35 30 35 35 45-51x56 45 51 56

Tolerance: Tolerances may vary for some sizes due to different Note: Inquire for additional standard and non-standard
molds available at time of manufacture. sizes. Cast bronze and steel bushings also available
by special request.

Part No. = ID - OD x LENGTH

Ametric American Metric® Corporation

1-077 - 90513 GROUP: 077 ®

541
 Metric Sleeve Bearing
DIN 1850 Form J Sinterbronze
Oil Impregnated Bronze
ASTM: B-438-73 Gr 1 Type II

Part No. ID OD L Part No. ID OD L Part No. ID OD L Part No. ID OD L

60-72x50 60 72 50 85-95x100 85 95 100

60-72x60 60 72 60
60-72x63 60 72 63 85-100x100 85 100 100
60-72x70 60 72 70
90-105x80 90 105 80
60-75x60 60 75 60
60-75x90 60 75 90 90-110x80 90 110 80

60-80x90 60 80 90 90-110.3x65 90 110.3 65

60-80x120 60 80 120
100-120x80 100 120 80
60-85x90 60 85 90 100-120x120 100 120 120

63-70x40 63 70 40 100-120.3x65 100 120.3 65

63-70x50 63 70 50
110-123.5x65 110 123.5 65
65-75x60 65 75 60
65-75x90 65 75 90 110-125x120 110 125 120

65-77x63 65 77 63 120-130x65 120 130 65

65-80x60 65 80 60 125-150x120 125 150 120

65-80x90 65 80 90
140-155x65 140 155 65
65-81x60 65 81 60

70-80x60 70 80 60
70-80x90 70 80 90
70-80x120 70 80 120

70-82x63 70 82 63

70-85x60 70 85 60
70-85x90 70 85 90

75-85x70 75 85 70
75-85x100 75 85 100

75-90x60 75 90 60
75-90x63 75 90 63
75-90x70 75 90 70
75-90x100 75 90 100

75-100x100 75 100 100

80-90x70 80 90 70
80-90x100 80 90 100

80-95x63 80 95 63
80-95x70 80 95 70
80-95x100 80 95 100

80-96x60 80 96 60

80-100x120 80 100 120

80-105x100 80 105 100

Tolerance: Tolerances may vary for some sizes due to different Note: Inquire for additional standard and non-standard sizes. Cast
molds available at time of manufacture. bronze and steel bushings also available by special request.

Part No. = ID - OD x LENGTH

Ametric American Metric® Corporation

® GROUP: 077 1-077 - 90513
542
 Metric Flange Bearings
DIN 1850 Form V Sinterbronze
Oil Impregnated Bronze
ASTM: B-438-73 Gr 1 Type II

Part Flange Flange Part Flange Flange

No. ID OD L OD Thick- No. ID OD L OD Thick-

3-5x4-8X1.5 3 5 4 8 1.5 6-12x8-14x2 6 12 8 14 2

6-12x13-14x2 6 12 13 14 2
3-6x10-8x1 3 6 10 8 1 6-12x20-14x2 12 20 14 2
7
3-6x4-9X1.5 3 6 4 9 1.5 7-12x15-15x2.5 12 15 15 2.5
3-6x6-9X1.5 3 6 6 9 1.5 8
3-6x10-9X1.5 3 6 10 9 1.5 8-11x6-12X1.5 8 11 6 12 1.5
8-11x10-12X1.5 8 11 10 12 1.5
4-6x8-8X1 4 6 8 8 1 8-11x12-12X1.5 11 12 12 1.5
8
4-7x6-10X1.5 4 7 6 10 1.5 8-11x6-14X1.5 8 11 6 14 1.5
8-11x10-14X1.5 8 11 10 14 1.5
4-7x6-12X2 4 7 6 12 2 8-11x12-14X1.5 11 12 14 1.5
4-7x10-12X2 4 7 10 12 2 8
8-12x6-16X2 8 12 6 16 2
4-8x17-9x2.5 4 8 17 9 2.5 8-12x8-16X2 8 12 8 16 2
8-12x12-16X2 8 12 12 16 2
4-8x6-10X1.5 4 8 6 10 1.5 8-12x14-16x2 8 12 14 16 2
8-12x16-16X2 12 16 16 2
4-8x4-12X2 4 8 4 12 2 8
4-8x6-12X2 4 8 6 12 2 8-13x14-16x2 13 14 16 2
4-8x8-12X2 4 8 8 12 2 8
4-8x12-12X2 4 8 12 12 2 8-14x8-18X3 8 14 8 18 3
8-14x14-18x3 8 14 14 18 3
5-8x12-11x1.4 5 8 12 11 1.4 8-14x20-18x3 14 20 18 3
8
5-8x5-12X2 5 8 5 12 2 8-15x20-18x2 15 20 18 2
5-8x6-12X2 5 8 6 12 2 9
5-8x10-12X2 5 8 10 12 2 9-12x15-15.5x2.5 12 15 15.5 2.5
5-8x12-12X2 5 8 12 12 2 9
9-14x6-19X2.5 9 14 6 19 2.5
5-9x4-13X2 5 9 4 13 2 9-14x10-19X2.5 9 14 10 19 2.5
5-9x5-13X2 5 9 5 13 2 9-14x14-19X2.5 14 14 19 2.5
5-9x8-13X2 5 9 8 13 2 9
9-15x20-20x4.5 15 20 20 4.5
5-10x6-12X2 5 10 6 12 2 10
10-12x10-14x1 12 10 14 1
5-10x15-13x2 5 10 15 13 2 10
10-13x6-16X1.5 10 13 6 16 1.5
6-9x6-12X1.5 6 9 6 12 1.5 10-13x8-16X1.5 10 13 8 16 1.5
6-9x10-12X1.5 6 9 10 12 1.5 10-13x10-16X1.5 10 13 10 16 1.5
6-9x12-12X1.5 6 9 12 12 1.5 10-13x12-16X1.5 10 13 12 16 1.5
10-13x16-16X1.5 10 13 16 16 1.5
6-9x5-14X1.5 6 9 5 14 1.5 10-13x20-16X1.5 13 20 16 1.5
6-9x6-14X1.5 6 9 6 14 1.5 10
6-9x10-14X1.5 6 9 10 14 1.5 10-14x15-17.2x2.8 14 15 17.2 2.8
6-9x12-14X1.5 6 9 12 14 1.5 10
10-14x10-18x3 10 14 10 18 3
6-10x4-14X2 6 10 4 14 2 10-14x14-18x3 10 14 14 18 3
6-10x6-14X2 6 10 6 14 2 10-14x20-18x3 14 20 18 3
6-10x10-14X2 6 10 10 14 2 10
6-10x16-14X2 6 10 16 14 2 10-15x20-19x2 15 20 19 2
10
6-10x13-12x2 6 10 13 12 2 10-15x10-20X2.5 10 15 10 20 2.5
10-15x16-20X2.5 10 15 16 20 2.5
6-10x13-14x1.5 6 10 13 14 1.5 10-15x20-20X2.5 15 20 20 2.5
10
6-10x14-14x2 6 10 14 14 2 10-16x30-20x2.5 16 30 20 2.5
10
6-12x6-14X2 6 12 6 14 2 10-16x8-20X3 10 16 8 20 3
6 10-16x10-20X3 10
Tolerance: Tolerances may vary for some sizes due to different Note: Inquire for additional standard and non-
molds available at time of manufacture. standard sizes. Cast bronze and steel bushings
also available by special request.
Part No. = ID - OD x LENGTH - FLANGE OD x FLANGE THICKNESS

Ametric American Metric® Corporation

1-077 - 90513 GROUP: 077 ®

543
 Metric Flange Bearings
DIN 1850 Form V Sinterbronze
Oil Impregnated Bronze
ASTM: B-438-73 Gr 1 Type II

Part Flange Flange Part Flange Flange

No. ID OD L OD Thick- No. ID OD L OD Thick-

10-16x16-20x3 10 16 10 20 3 14-20x20-26X3 14 20 18 26 3
10-16x20-20x3 10 16 16 20 3 14-20x22-26X3 14 20 20 26 3
10-16x30-20x3 16 20 20 3 14-20x28-26X3 20 22 26 3
10 16 30 20 3 14 20 28 26 3
10-16x8-22X3 10 14-20x25-27X3
10-16x10-22X3 10 16 8 22 3 15 20 25 27 3
10-16x12-22X3 10 16 10 22 3 15-19x15-23x2 15
10-16x16-22X3 10 16 12 22 3 15-19x16-23X2 15 19 15 23 2
10-16x20-22X3 16 16 22 3 15-19x20-23X2 15 19 16 23 2
12 16 20 22 3 15-19x25-23x2 19 20 23 2
12-15x7-18X1.5 12 15 19 25 23 2
12-15x12-18X1.5 12 15 7 18 1.5 15-20x30-24x2.5
12-15x16-18X1.5 12 15 12 18 1.5 15 20 30 24 2.5
12-15x20-18X1.5 12 15 16 18 1.5 15-20x15-27X3 15
12-15x25-18X1.5 15 20 18 1.5 15-20x25-27X3 20 15 27 3
12 15 25 18 1.5 15 20 25 27 3
12-15x9-22x5 15-21x10-27X3 15
12 15 9 22 5 15-21x15-27X3 15 21 10 27 3
12-16x12-20x2 12 15-21x16-27X3 15 21 15 27 3
12-16x16-20x2 12 16 12 20 2 15-21x20-27X3 15 21 16 27 3
12-16x25-20x2 16 16 20 2 15-21x25-27X3 15 21 20 27 3
12 16 25 20 2 15-21x32-27X3 21 25 27 3
12-16x15-20x3 15 21 32 27 3
12 16 15 20 3 15-22x12-28X3 15
12-17x12-22X2.5 12 15-22x15-28x3 15 22 12 28 3
12-17x16-22X2.5 12 17 12 22 2.5 15-22x16-28X3 15 22 15 28 3
12-17x20-22X2.5 12 17 16 22 2.5 15-22x22-28x3 15 22 16 28 3
12-17x25-22X2.5 17 20 22 2.5 15-22x30-28x3 22 22 28 3
12 17 25 22 2.5 15 22 30 28 3
12-18x25-21.5x3.5 15-30x40-38x5
12 18 25 21.5 3.5 16 30 40 38 5
12-18x10-22X3 12 16-20x12-24X2 16
12-18x12-22X3 12 18 10 22 3 16-20x16-24X2 16 20 12 24 2
12-18x18-22x3 12 18 12 22 3 16-20x20-24X2 16 20 16 24 2
12-18x25-22x3 18 18 22 3 16-20X25-24X2 20 20 24 2
12 18 25 22 3 16 20 25 24 2
12-18x8-24X3 12 16-22x12-28X3 16
12-18x10-24X3 12 18 8 24 3 16-22x16-28X3 16 22 12 28 3
12-18x12-24X3 12 18 10 24 3 16-22x20-28X3 16 22 16 28 3
12-18x16-24X3 12 18 12 24 3 16-22x25-28X3 16 22 20 28 3
12-18x20-24X3 12 18 16 24 3 16-22x32-28X3 22 25 28 3
12-18x25-24X3 18 20 24 3 16 22 32 28 3
13 18 25 24 3 16-22x16-28x3.5 16
13-18x16-23x5 13 16-22x22-28x3.5 16 22 16 28 3.5
13-18x25-23x5 18 16 23 5 16-22x30-28x3.5 22 22 28 3.5
14 18 25 23 5 16 22 30 28 3.5
14-18x12-22X2 14 16-22x12-28X4 16
14-18x14-22X2 14 18 12 22 2 16-22x16-28X4 22 12 28 4
14-18x18-22X2 14 18 14 22 2 17 22 16 28 4
14-18x20-22X2 14 18 18 22 2 17-22x30-26x2
14-18x22-22X2 14 18 20 22 2 18 22 30 26 2
14-18x25-22X2 18 22 22 2 18-22x18-26X2 18
14 18 25 22 2 18-22x20-26X2 18 22 18 26 2
14-20x25-24x4 18-22x22-26X2 18 22 20 26 2
14 20 25 24 4 18-22x25-26X2 18 22 22 26 2
14-20x10-25X3 14 18-22x28-26X2 22 25 26 2
14-20x12-25X3 20 10 25 3 18 22 28 26 2
14 20 12 25 3 18-22x18-28x3
14-20x10-26X3 14 18 22 18 28 3
14-20x14-26X3 14 20 10 26 3 18-24x12-30X3
14-20x18-26X3 14 20 14 26 3 24 12 30 3

Tolerance: Tolerances may vary for some sizes due to different Note: Inquire for additional standard and non-
molds available at time of manufacture. standard sizes. Cast bronze and steel bushings
also available by special request.
Part No. = ID - OD x LENGTH - FLANGE OD x FLANGE THICKNESS

Ametric American Metric® Corporation

® GROUP: 077 1-077 - 90513
544
 Metric Flange Bearings
DIN 1850 Form V Sinterbronze
Oil Impregnated Bronze
ASTM: B-438-73 Gr 1 Type II

Part Flange Flange Part Flange Flange

No. ID OD L OD Thick- No. ID OD L OD Thick-
18-24x18-30X3 18 24 18 30 3 25-30x20-35X2.5 25 30 20 35 2.5
18-24x22-30X3 18 24 22 30 3 25-30x25-35X2.5 25 30 25 35 2.5
18-24x28-30X3 18 24 28 30 3 25-30x30-35X2.5 25 30 30 35 2.5
18-24x30-30X3 18 24 30 30 3 25-30x32-35X2.5 25 30 32 35 2.5
25-30x40-35X2.5 25 30 40 35 2.5
18-25x30-31x5 18 25 30 31 5
25-30x45-36x3 25 30 45 36 3
18-25x12-32x4 18 25 12 32 4
18-25x16-32x4 18 25 16 32 4 25-32x20-39X3.5 25 32 20 39 3.5
18-25x18-32x4 18 25 18 32 4 25-32x25-39X3.5 25 32 25 39 3.5
18-25x25-32x4 18 25 25 32 4 25-32x30-39X3.5 25 32 30 39 3.5
18-25x30-32x4 18 25 30 32 4 25-32x32-39X3.5 25 32 32 39 3.5
18-25x35-32x4 18 25 35 32 4
25-32x53-40x3 25 32 53 40 3
20-24x12-28X2 20 24 12 28 2
20-24x16-28X2 20 24 16 28 2 25-32x25-40x5 25 32 25 40 5
20-24x20-28X2 20 24 20 28 2 25-32x32-40x5 25 32 32 40 5
20-24x25-28X2 20 24 25 28 2 25-32x40-40x5 25 32 40 40 5
25-32x53-40x5 25 32 53 40 5
20-25x30-28x2 20 25 30 28 2
25-35x16-45X5 25 35 16 45 5
20-26x40-32x2 20 26 40 32 2 25-35x25-45X5 25 35 25 45 5
25-35x35-45x5 25 35 35 45 5
20-26x15-32X3 20 26 15 32 3 25-35x45-45x5 25 35 45 45 5
20-26x16-32X3 20 26 16 32 3
20-26x20-32X3 20 26 20 32 3 25-36x50-43x7 25 36 50 43 7
20-26x25-32X3 20 26 25 32 3
20-26x30-32X3 20 26 30 32 3 28-33x22-38X2.5 28 33 22 38 2.5
20-26x32-32X3 20 26 32 32 3 28-33x28-38X2.5 28 33 28 38 2.5
28-33x36-38X2.5 28 33 36 38 2.5
20-28x20-34x3 20 28 20 34 3
28-36x22-44X4 28 36 22 44 4
20-28x40-34.5x5.5 20 28 40 34.5 5.5 28-36x28-44X4 28 36 28 44 4
28-36x36-44X4 28 36 36 44 4
20-28x16-35X4 20 28 16 35 4
20-28x20-35X4 20 28 20 35 4 28-40x50-48x8 28 40 50 48 8
20-28x25-35x4 20 28 25 35 4
20-28x35-35x4 20 28 35 35 4 30-35x40-40x3 30 35 40 40 3
20-28x40-35x4 20 28 40 35 4
30-36x20-42x3 30 36 20 42 3
22-27x18-32X2.5 22 27 18 32 2.5 30-36x30-42x3 30 36 30 42 3
22-27x22-32X2.5 22 27 22 32 2.5 30-36x40-42x3 30 36 40 42 3
22-27x28-32X2.5 22 27 28 32 2.5
30-36x20-44X4 30 36 20 44 4
22-28x15-34X3 22 28 15 34 3 30-36x30-44X4 30 36 30 44 4
22-28x16-34X3 22 28 16 34 3 30-36x40-44X4 30 36 40 44 4
22-28x20-34X3 22 28 20 34 3
22-28x25-34X3 22 28 25 34 3 30-38x20-46X4 30 38 20 46 4
22-28x30-34X3 22 28 30 34 3 30-38x25-46X4 30 38 25 46 4
30-38x30-46X4 30 38 30 46 4
22-29x18-36X3.5 22 29 18 36 3.5
22-29x22-36X3.5 22 29 22 36 3.5 30-38x45-50x4 30 38 45 50 4
22-29x28-36X3.5 22 29 28 36 3.5
22-29x36-36X3.5 22 29 36 36 3.5 30-40x20-50X5 30 40 20 50 5
30-40x30-50X5 30 40 30 50 5
22-32x40-39x6 22 32 40 39 6 30-40x42-50x5 30 40 42 50 5
30-40x55-50x5 30 40 55 50 5
22-32x22-40x5 22 32 22 40 5
22-32x30-40x5 22 32 30 40 5 32-38x20-44X3 32 38 20 44 3
22-32x40-40x5 22 32 40 40 5 32-38x25-44X3 32 38 25 44 3
32-38x32-44X3 32 38 32 44 3

Tolerance: Tolerances may vary for some sizes due to different Note: Inquire for additional standard and non-
molds available at time of manufacture. standard sizes. Cast bronze and steel bushings
also available by special request.
Part No. = ID - OD x LENGTH - FLANGE OD x FLANGE THICKNESS

Ametric American Metric® Corporation

1-077 - 90513 GROUP: 077 ®

545
 Metric Flange Bearings
DIN 1850 Form V Sinterbronze
Oil Impregnated Bronze
ASTM: B-438-73 Gr 1 Type II

Part Flange Flange Part Flange Flange

No. ID OD L OD Thick- No. ID OD L OD Thick-
32-40x50-45x5 32 40 50 45 5 45-55x55-65X5 45 55 45 65 5
45 55 65 5
32-40x20-48X4 32 40 20 48 4 45-55x30-65X6 55
32-40x25-48X4 32 40 25 48 4 45-55x45-65X6 45 55 30 65 6
32-40x30-48X4 32 40 30 48 4 45 45 65 6
32-40x32-48X4 32 40 32 48 4 45-56x28-67X5.5 56
45-56x36-67X5.5 45 56 28 67 5.5
35-40x32-48X4 35 40 32 48 4 45-56x45-67X5.5 45 56 36 67 5.5
45 45 67 5.5
35-45x50-50x6 35 45 50 50 6 50-56x30-62X3 56
50-56x32-62X3 50 56 30 62 3
35-45x20-55X5 35 45 20 55 5 50-56x40-62X3 50 56 32 62 3
35-45x25-55X5 35 45 25 55 5 50-56x50-62X3 50 56 40 62 3
35-45x35-55X5 35 45 35 55 5 50 50 62 3
35-45x40-55X5 35 45 40 55 5 50-60x32-70X5 60
50-60x35-70X5 50 60 32 70 5
36-42x22-48X3 36 42 22 48 3 50-60x40-70X5 50 60 35 70 5
36-42x28-48X3 36 42 28 48 3 50-60x50-70X5 50 60 40 70 5
36-42x36-48X3 36 42 36 48 3 50 50 70 5
50-60x30-70X6 60
36-45x22-54X4.5 36 45 22 54 4.5 50-60x50-70X6 50 60 30 70 6
36-45x28-54X4.5 36 45 28 54 4.5 50-60x60-70x6 50 60 50 70 6
36-45x36-54X4.5 36 45 36 54 4.5 50 60 70 6
55-64x45-71x5 64
40-46x25-52X3 40 46 25 52 3 55 45 71 5
40-46x32-52X3 40 46 32 52 3 60-70x50-80X5 70
40-46x40-52X3 40 46 40 52 3 60-70x60-80X5 60 70 50 80 5
60 60 80 5
40-50x30-60X5 40 50 30 60 5 60-72x50-84X6 72
40-50x32-60X5 40 50 32 60 5 60-72x60-84X6 60 72 50 84 6
40-50x40-60X5 40 50 40 60 5 60 60 84 6
40-50x50-60X5 40 50 50 60 5 60-75x35-85X8 75
60-75x60-85X8 60 75 35 85 8
40-50x25-60X6 40 50 25 60 6 60 60 85 8
40-50x40-60X6 40 50 40 60 6 70-85x60-95X8 85
40-50x50-60x6 40 50 50 60 6 70 60 95 8
40-50x60-60x6 40 50 60 60 6 80-95x70-105x8 95
80 70 105 8
45-51x28-57X3 45 51 28 57 3 90-110x50-120X8 110
45-51x36-57X3 45 51 36 57 3 90 50 120 8
45-51x45-57X3 45 51 45 57 3 100-120x80-130X8 120
100 80 130 8
45-55x35-65X5 45 55 35 65 5
45-55x45-65X5 55
Tolerance: Tolerances may vary for some sizes due to different Note: Inquire for additional standard and non-
molds available at time of manufacture. standard sizes. Cast bronze and steel bushings
also available by special request.
Part No. = ID - OD x LENGTH - FLANGE OD x FLANGE THICKNESS

Oil and Grease Grooves

Oil and Grease Grooves are available by special order.

Ametric American Metric® Corporation

® GROUP: 077 1-077 - 90513
546
 Metric Sleeve Bearing
Sintered Self-Lubricating Materials

Materials Available
Oil-Bronze* Oil-Steel Graphite-Bronze Lead-Bronze Ferro-Bronze
Approx. composition %
Cu 89.5 78.0 80.0 45.0
Sn 9.3 8.0 10.0 4.5
C 1.2 6.0 1.0
Pb 8.0 10.0
Fe 100.0 49.5

Density g/cm3 6.0 5.5 6.6 7.0 6.2

Oil Content 25 25 20
volume %

Ultimate tensile 60 60 25 100 100

strength Rm N/mm2

Elongation 1 2 0.5 3 1
A%

Hardness HV 5 15 20 15 35 40

Linear expansion 18 12 14 18 15
x 10-6/K

Thermal conductivity 40 30 40 35
W/m x K

Coefficient of friction

pv/Nmm2 x m/s 1.6 1.6 0.4 1.3 1.7

Continuous service
Life 10,000 hours

p max (N/mm2) 10 9.5 2.5 10 10

Continuous service
Surface velocity
approx. 0.17 m/s

p max (N/mm2) 50 50 40 50 50
Static load
0.1% deformation

v max (m/s) 5 5 0.25 5 5

Continuous service

Corresponding ASTM B 438 ASTM B 439

Standards grad 1 typ 1 grad 1
SAE 840 SAE 850
Sint-A 51 Sint-A 00
ISO 5755/1 ISO 5755/1
P 4021 Z P 1011 Z
MPIF CTG-1001-K17 MPIF F-0000-K15
RoHS RoHS

* Standard material for stock sleeve bearings. RoHS COMPLIANT

Call to check delivery on non-standard material.

Ametric American Metric® Corporation

1-077 - 60719 GROUP: 077 ®

547
 Metric Nylon
Sleeve Bearings
Injection molded polymide 6.6

ID OD Wt. ID OD Wt. ID OD Wt.

Part No. d D L g Part No. d D L g Part No. d D L g

N8-12x10 8 12 10 1.0 N20-24x15 20 24 15 2.5 N32-36x30 32 36 30

N8-14x10 8 14 10 2.0 N20-25x15 20 25 15 3.0 N32-40x30 32 40 30 15.5
N10-12x10 10 12 10 0.5 N40-45x40 40 45 40 14.5
N10-14x10 10 14 10 1.0 N20-26x20 20 26 20 5.0 N40-48x40 40 48 40
N20-28x20 20 28 20 7.0
N10-16x10 10 16 10 1.5 N20-30x20 20 30 20 9.0 N40-50x40 40 50 40 32.0
N12-14x10 12 14 10 0.7 N25-30x20 25 30 20 5.0 N50-58x50 50 56 50
N12-16x10 12 16 10 1.0 N50-60x50 50 60 50 48.5
N12-18x14 12 18 14 1.0 N25-30x32 25 30 32 7.8 N54-62x60 54 62 60
N25-32x20 25 32 20 7.0
N15-20x15 15 20 15 2.5 N25-35x20 25 35 20 10.5 N54-70x60 60 70 60 68.0
N15-22x15 15 22 15 3.0 N28-32x20 28 32 20 5.0
N15-25x15 15 25 15 3.5
N16-20x15 16 20 15 2.0 N28-38x19 28 38 19 6.0
N30-35x20 30 35 20 5.7
N16-22x15 16 22 15 3.2 N30-36x30 30 36 30 10.5
N16-24x15 16 24 15 4.2 N30-40x30 30 40 30 12.0

Part No. = ID - OD x LENGTH

PTFE
(Teflon® type material)
Sleeve Split Bearings

ID OD Wt. ID OD Wt. ID OD Wt.

Part No. d D L g Part No. d D L g Part No. d D L g

ST3-4.5x4 3 4.5 4 0.1 ST12-14x10 12 14 10 3.0 ST25-28x25 25 28 25 23.9

ST3-4.5x5 3 4.5 5 0.3 ST12-14x12 12 14 12 3.7 ST25-28x30 25 28 30 28.4
ST3-4.5x6 3 4.5 6 0.4 ST12-14x15 12 14 15 4.7 ST25-28x40 25 28 40 37.3
ST4-5.5x4 4 5.5 4 0.3 ST12-14x20 12 14 20 6.1
ST4-5.5x6 4 5.5 6 0.6 ST14-16x10 14 16 10 3.6 ST26-30x15 26 30 15 15.6
ST4-5.5x8 4 5.5 8 0.9 ST14-16x20 14 16 20 7.1 ST26-29x20 26 29 20 26.1
ST5-7x5 5 7 5 0.7 ST26-29x30 26 29 30 39.0
ST5-7x8 5 7 8 1.1 ST15-14x10 15 17 10 3.8 ST28-32x20 28 32 20 28.8
ST6-8x5 6 8 5 0.7 ST15-17x12 15 17 12 4.5 ST28-32x25 28 32 25 39.0
ST6-8x6 6 8 6 0.9 ST15-17x15 15 17 15 5.7 ST30-34x12 30 34 12 17.5
ST15-17x20 15 17 20 7.6 ST30-34x15 30 34 15 22.9
ST6-8x10 6 8 10 1.7 ST16-18x10 16 18 10 4.6 ST30-34x20 30 34 20 30.9
ST7-9x10 7 9 10 1.8 ST16-18x15 16 18 15 6.1 ST30-34x30 30 34 30 46.1
ST8-10x6 8 10 6 1.2 ST16-18x20 16 18 20 8.1 ST30-34x35 30 34 35 53.0
ST8-10x8 8 10 8 1.7 ST16-18x25 16 18 25 10.1 ST32-36x20 32 36 20 32.0
ST8-10x10 8 10 10 2.1 ST18-20x20 18 20 20 8.9
ST9-11x10 9 11 10 2.2 ST20-23x10 20 23 10 7.5 ST32-36x25 32 36 25 40.2
ST10-12x6 10 12 6 1.9 ST35-39x20 35 39 20 35.4
ST10-12x8 10 12 8 2.0 ST20-23x12 20 23 12 6.8 ST35-39x40 35 39 40 70.8
ST10-12x10 10 12 10 2.5 ST20-23x15 20 23 15 11.6 ST38-42x30 38 42 30 56.9
ST10-12x12 10 12 12 2.9 ST20-23x20 20 23 20 15.1 ST40-44x20 40 44 20 40.0
ST20-23x30 20 23 30 23.0 ST10-44x30 40 44 30 60.2
ST10-12x15 10 12 15 3.8 ST22-25x20 22 25 20 16.6 ST40-44x50 40 44 50 101.5
ST10-12x20 10 12 20 5.3 ST24-27x25 24 27 25 23.8 ST50-55x30 50 55 30 95.0
ST12-14x6 12 14 6 1.7 ST25-28x15 25 28 15 14.2 ST50-55x50 50 55 50 159.9
ST12-14x8 12 14 8 2.0 ST25-28x20 25 28 20 10.0

Part No. = ID - OD x LENGTH

Ametric American Metric® Corporation

® GROUP: 077 1-077 - 020812
548
 Metric Nylon
Flange Bearings
Injection molded polymide 6.6

Wt. Wt.
Part No. d1 d2 b1 d3 b2 g Part No. d1 d2 b1 d3 b2 g

N6-10x8-15x1.5 6 10 8 15 1.5 0.8 N25-32x20-40x3 25 30 20 36 3 6.0

N8-12x6-16x2 8 12 6 16 2 0.8 25 32 20 40 3 8.5
N8-14x10-20x2 8 14 10 20 2 1.7 N25-35x20-45x3
N10-12x6-16x2 10 12 6 16 2 0.6 N25-35x30-45x4 25 35 20 45 3 12.7
N10-14x10-20x2 10 14 10 20 2 1.3 N28-32x30-40x4 25 35 30 45 4 18.5
N28-38x30-48x4 28 32 30 40 4 8.0
N10-16x10-20x2 10 16 10 20 2 1.8 N30-32x30-40x4 28 38 30 48 4 20.0
N12-14x10-20x2 12 14 10 20 2 1.0 30 32 30 40 4 5.0
N12-16x10-20x2 12 16 10 20 2 1.5 N30-35x30-45x4
N14-20x24-30x2 14 20 24 30 2 2.8 N30-38x30-48x4 30 35 30 45 4 11.5
N16-20x15-28x2 16 20 15 28 2 2.8 N32-35x30-45x4 30 38 30 48 4 17.0
N32-38x30-48x4 32 35 30 45 4 10.0
N16-22x15-30x2 16 22 15 30 2 4.0 N32-40x30-50x4 32 38 30 48 4 18.5
N16-24x15-30x2 16 24 15 30 2 5.0 32 40 30 50 4 19.0
N20-24x15-30x2 20 24 15 30 2 3.0 N40-44x40-54x5
N20-25x15-30x2 20 25 15 30 2 3.5 N40-48x40-58x5 40 44 40 54 5 16.5
N20-26x12-30x2 20 26 12 30 2 3.5 N40-50x40-60x5 40 48 40 58 5 30.0
N50-56x50-70x5 40 50 40 60 5 36.0
N20-26x15-32x2 20 26 15 32 2 4.5 N50-60x50-70x5 50 56 50 70 5 42.0
N20-26x20-32x3 20 26 20 32 3 5.8 N60-70x60-80x5 50 60 50 70 5 52.0
N20-30x20-36x3 20 30 20 36 3 9.7 60 70 60 80 5 74.0
N25-30x20-36x3
Part No. = ID - OD x LENGTH - FLANGE OD X FLANGE THICKNESS

PTFE
(Teflon® type material)
Flange Split Bearings

Wt. Wt.
Part No. d D L DB g Part No. d D L DB g

ST3-4.6x5-7 3 4.6 5.0 7 0.3 ST15-17x17-23 15 17 17.0 23 8.5

ST4-5.6x5-9 4 5.6 5.0 9 0.5 ST16-18x17-24 16 18 17.0 24 9.1
ST5-7x6-10 5 7 6.0 10 0.9 ST18-20x12-26 18 20 12.0 26 6.6
ST6-8x7-12 6 8 7.0 12 1.4 ST20-23x11.5-30 20 23 11.5 30 13.7

ST8-10x5.5-15 8 10 5.5 15 1.9 ST22-25x21.5-33 22 25 21.5 33 21.0

ST8-10x9.5-15 8 10 9.5 15 2.3 ST25-28x26.5-35 25 28 26.5 35 27.3
ST10-12x9-18 10 12 9.0 18 2.9 ST30-34x30-42 30 34 30.0 42 53.3
ST10-12x12-18 10 12 12.0 18 4.0 ST35-39x26-47 35 39 26.0 47 46.0

ST12-14x17-20 12 14 17.0 20 5.6 ST35-39x40-49 35 39 40.0 49 81.4

ST14-16x17-22 14 16 17.0 22 6.2 ST40-44x26-53 40 44 26.0 53 92.0
ST15-17x12-23 15 17 12.0 23 5.0 ST50-55x22-60 50 55 22.0 60 145.8

Part No. = ID - OD x LENGTH - FLANGE OD

Ametric American Metric® Corporation

1-077 - 020812 GROUP: 077 ®

549
 Metric Sintered Self-Lubricating Bars
Diameter Length
Part No. Material Ø L
BAR 20X52 B Oil-Bronze 20 52
BAR 30X52 B 30 52
BAR 40X52 B 40 52
BAR 50X60 B 50 60
L BAR 60X60 B 60 60
BAR 80X80 B 80 80

BAR 10X22 G Graphite-Bronze 10 22

BAR 20X52 G 20 52
BAR 30X52 G 30 52
Ø BAR 40X52 G 40 52
BAR 50X60 G 50 60
BAR 60X60 G 60 60
BAR 80X80 G 80 80

Machining
Machining of self-lubricated bearings should be avoided. Casting produces a far superior bearing.
Oil-Bronze and Graphite-Bronze should be turned with diamond or carbide tips, quality ISO K 20,
with a tip radius of max. 0.1-0.2 mm. Suitable cutting speeds are 100-200 m/min.

The bearing surface of self-lubricating bearings must not be ground as the oil transportation pores
are then closed. The outer surface of bearing can be machined in any way required. The bearing
can be heated on an electrical hot plate after machining to check that the pores are still open. Oil
will then ooze out of the pores.

Bearings usually loose oil during the turning operation and the oil should be replaced before the
bearing is used. A simple method of doing this is accomplished by immersing the bearing in oil SAE
20 heated to 80ºC (176ºF). The bearing should be immersed until the oil has cooled. The pores are
filled with oil by this process and the bearing is then ready for use.

Metric Sintered Self-Lubricating Spherical Bearings

Inside Outside Length Inside Outside Length

Ø d H7 Ø D h11 L h13 Ø d H7 Ø D h11 L h13
2 5 3 8 16 11
3 8 6 8 19 14
4 10 8 9 22 14
5 10 7 10 18 12

5 13 10 10 22 14
6 12 8 12 25 20
6 15 11 16 30 20
7 16 11 20 40 25
25 50 30

Non-Stock, request price (quantity sensitive)

Ametric American Metric® Corporation

® GROUP: 077 1-077 - 70217
550
 Metric Sleeve Bearing
Cast Bronze SAE 660

Part Part Part Part

No. ID OD L No. ID OD L No. ID OD L No. ID OD L

CB 8-12x20 8 12 20 CB16-24x80 16 24 80 CB 50-55x60 50 55 60

CB 8-12x30 8 12 30 CB 30-40x100 30 40 100
CB 8-12x40 8 12 40 CB 20-24x50 20 30 50 CB 30-40x50 30 40 50 CB 50-60x100 50 60 100
CB 20-24x80 20 30 80 CB 50-60x60 50 60 60
CB 10-16x20 10 16 20 CB 35-40x100 35 40 100
CB 10-16x30 10 16 30 CB 20-30x50 20 30 50 CB 35-40x50 35 40 50 CB 56-65x100 56 65 100
CB 10-16x50 10 16 50 CB 20-30x80 20 30 80 CB 56-65x60 56 65 60
CB 35-45x100 35 45 100
CB 12-16x20 12 16 20 CB 25-30x100 25 30 100 CB 35-45x60 35 45 60
CB 12-16x30 12 16 30 CB 25-30x40 25 30 40
CB 12-16x40 12 16 40 CB 25-30x50 25 30 50 CB 39-45x100 39 45 100
CB 12-16x50 12 16 50 CB 25-30x60 25 30 60 CB 39-45x60 39 45 60

CB 12-20x30 12 20 30 CB 25-35x100 25 35 100 CB 39-50x100 39 50 100

CB 12-20x40 12 20 40 CB 25-35x30 25 35 30 CB 39-50x60 39 50 60
CB 12-20x50 12 20 50 CB 25-35x40 25 35 40
CB 25-35x50 25 35 50 CB 45-50x100 45 50 100
CB 16-20x20 16 20 20 CB 25-35x60 25 35 60 CB 45-50x60 45 50 60
CB 16-20x30 16 20 30
CB 16-20x40 16 20 40 CB 30-35x100 30 35 100 CB 45-55x100 45 55 100
CB 16-20x60 16 20 60 CB 30-35x30 30 35 30 CB 45-55x60 45 55 60
CB 30-35x40 30 35 40
CB 16-24x50 16 24 50 CB 30-35x50 30 35 50 CB 50-55x100 50 55 100

Tolerance: Inside Diameter + 0.25 mm Note: Inquire for additional standard and
Outside Diameter +0.060/ + 0.100 mm non-standard sizes. Oil and grease
Length +25 mm grooves available

Ametric American Metric® Corporation

1-077 - 80925 GROUP: 077 ®

551