NRS294-Index Pages 8/30/05 2:13 PM Page 1

mmetric
NR
S E A L S

Master Seals Catalogue 05/06

NRS294-Index Pages 8/30/05 2:13 PM Page 2
NRS294-Index Pages 8/30/05 2:13 PM Page 3

Contents
NR
S E A L S
Metric Seals

Seal Index

Piston Double Acting

01 Piston Seals
02 Glide Rings
03 Piston Rings
04 Pneumatic Piston and Seal

Piston Single Acting

05 Piston Seals
06 Piston Seals with Wear Rings
07 Piston V Pack Sets
08 Piston Seals Pneumatic

Cushion Seals
09 Pneumatic
10 Hydraulic

Rod Seals
11 Hydraulic Seals
12 Glide & Buffer Rings
13 V Pack Sets
14 Pneumatic Seals
15 Pneumatic Seal & Wiper Combination

Rod Wipers
16 Inserted & Metal Encased

Bearings
17 Bearing Rings & Strip
18 DU Bushes

Ancillary
19 O-rings, Backup Washers & Quad Rings
20 Grab Kits, Tools, Flange Seals,
Bonded Washers & Rotary Joint Seals
21 Charts
NRS294-Index Pages 8/30/05 2:13 PM Page 4
NRS294-Index Pages 8/30/05 2:13 PM Page i

Designs
NR
S E A L S
Double Acting Seals

01 Piston Seals
Type Composition Pressure Temperature Speed

DAS NBR element

Hytrel support 400 Bar -40° to 110°C 0.5 m/sec
Polyacetal wear rings 6,000 Psi -40° to 230°F 1.5'/sec

DAS NBR element

Hytrel support 400 Bar -40° to 110°C 0.5m /sec
Polyacetal wear rings 6000 PSI -40° to 230°F 1.5'/sec

SPE NBR element

Hytrel support 400 Bar -40° to 110°C 0.5 m/sec
Polyacetal extrusion rings 6,000 Psi -40° to 230°F 1.5'/sec

DSM NBR element

NBR fabric support 700 Bar -40° to 130°C 0.5m /sec
Polyacetal wear rings 10,000 Psi -40° to 266°F 1.5'/sec

DPS NBR fabric face

NBR element 350 Bar -40° to 110°C 0.5m /sec
Polyacetal wear rings 5,000 Psi -40° to 230°F 1.5'/sec

EUD Urethane face

NBR element 400 Bar -40° to 110°C 0.5m /sec
Polyacetal wear rings 6,000 Psi -40° to 230°F 1.5'/sec

SPL NBR element

PTFE supports 250 Bar -30° to 80°C 0.5m /sec
Polyacetal wear rings 3,750 Psi -22° to 176°F 1.5'/sec

DPWL NBR fabric element

Polyacetal wear rings 400 Bar -30° to 100°C 0.5m /sec
6,000 Psi -22° to 212°F 1.5'/sec

DPW NBR fabric element

Polyacetal wear rings 400 Bar -30° to 100°C 0.5m /sec
6,000 Psi -22° to 212°F 1.5'/sec

DPE NBR fabric element

Polyacetal extrusion rings 400 Bar -30° to 100°C 0.5m /sec
6,000 Psi -22° to 212°F 1.5'/sec

DP NBR fabric element

400 Bar -30° to 100°C 0.5m /sec
6,000 Psi -22° to 212°F 1.5'/sec

05/06
i
NRS294-Index Pages 8/30/05 2:13 PM Page ii

NR
Designs
NR S E A L S
S E A L S
Double Acting Seals

02 Glide Rings
Type Composition Pressure Temperature Speed

KPDP Polyurethane Face

NBR o-ring 16 Bar -30° to 80°C 1.0m /sec
230 Psi -22° to 176°F 3.0 '/sec

GP2 Filled PTFE Face

NBR o-ring 350 Bar -40° to 110°C 4.0m/sec
5,000 Psi -40° to 230°F 12.0'/sec

GP4 Filled PTFE Face

Viton o-ring 350 Bar -20° to 200°C 4.0m/sec
5,000 Psi -4° to 392°F 12.0'/sec

GP6 Polyurethane Face

NBR o-ring 500 Bar -40° to 110°C 0.8m /sec
7,000 Psi -40° to 230°F 2.5'/sec

GP8 Step Cut nylon face,

NBR Expander 350 Bar -30° to 120°C 1.5m /sec
5,000 Psi -22° to 250°F 5'/sec

PHD Filled PTFE face

T-Expander NBR 500 Bar -30° to 120°C 1.5m /sec
Hard AE rings 7,500 Psi -22° to 250°F 5'/sec

GP3 Filled PTFE Face

NBR o-ring 350 Bar -30° to 110°C 4.0m /sec
5,000 Psi -22° to 230°F 12.0'/sec

03 Piston Rings

PR1 Cast iron Pressure, temperature and speed

have little effect on the piston ring.

04 Pneumatic Piston and Seal

NBR bonded to Pneumatic

TET
Steel Piston with 10 Bar
Garter Springs 145 Psi

Hydraulic
40 Bar -25° to 100°C 0.5m/sec
580 Psi -13° to 212°F 1.5'/sec

ii 05/06
NRS294-Index Pages 8/30/05 2:13 PM Page iii

Designs
NR
S E A L S
Single Acting Seals

05 Piston Seals
Type Composition Pressure Temperature Speed

RSE Polyurethane
Asymmetrical 400 Bar -40° to 105°C 0.8m /sec
6,000 Psi -40° to 221°F 2.5'/sec

RSEA Polyurethane shell

Polyacetal AE ring 400 Bar -40° to 105°C 0.8m /sec
Asymmetrical 6,000 Psi -40° to 221°F 2.5'/sec

RSEA Polyurethane shell

Nylon backup 400 Bar -40° to 105°C 0.8 m/sec
Asymmetrical 6,000 Psi -40° to 221°F 2.5'/sec

RSS Polyurethane
Symmetrical 400 Bar -40° to 105°C 0.8m /sec
6,000 Psi -40° to 221°F 2.5'/sec

MAD Polyurethane
Symmetrical 400 Bar -30° to 100°C 0.8m /sec
6,000 Psi -22° to 212°F 2.5'/sec

JPS NBR shell Replacement part for Asian construction equipment only.
Nylon backup
Asymmetrical

CPE NBR fabric element

Polyacetal AE ring 400 Bar -30° to 100°C 0.5m /sec
Asymmetrical 6,000 Psi -22° to 212°F 1.5'/sec

CP NBR fabric element

Symmetrical 400 Bar -30° to 100°C 0.5m /sec
6,000 Psi -22° to 212°F 1.5'/sec

19M Nylon or PTFE Used in conjunction with Rod and/or Piston U-Rings.
Symmetrical

05/06
iii
NRS294-Index Pages 8/30/05 2:13 PM Page iv

NR
Designs
NR S E A L S
S E A L S
Single Acting Seals

06 Piston Seals with Wear Rings

Type Composition Pressure Temperature Speed

RSEW Polyurethane shell

Polyacetal wear ring 400 Bar -40° to 105°C 0.8m /sec
6,000 Psi -40° to 221°F 2.5'/sec

RSEWR Polyurethane shell

Polyacetal wear ring 400 Bar -40° to 105°C 0.8m /sec
& retainer 6,000 Psi -40° to 221°F 2.5'/sec

CPL NBR fabric element

Polyacetal wear ring 400 Bar -30° to 100°C 0.5m /sec
6,000 Psi -22° to 212°F 1.5'/sec

CPLR NBR fabric element

Polyacetal wear ring 400 Bar -30° to 100°C 0.5m /sec
& retainer 6,000 Psi -22° to 212°F 1.5'/sec

07 Piston V Pack Sets

VS1 NBR fabric

700 Bar -40° to 110°C 0.5 m/sec
10,000 Psi -40° to 230°F 1.5'/sec

08 Piston Seals Pneumatic

GPP Polyurethane
Asymmetrical 16 Bar -30° to 80°C 1.0m /sec
230 Psi -22° to 176°F 3.0'/sec

DE NBR
Asymmetrical 16 Bar -30° to 100°C 0.5m /sec
230 Psi -22° to 212°F 1.5'/sec

U-70 NBR 70 Shore A

Symmetrical 16 Bar -30° to 100°C 0.5m /sec
230 Psi -22° to 212°F 1.5'/sec

U-90 NBR 90 Shore A

Symmetrical 85 Bar -30° to 100°C 0.5m /sec
1,250 Psi -22° to 212°F 1.5'/sec

iv 05/06
NRS294-Index Pages 8/30/05 2:13 PM Page v

Designs
NR
S E A L S
Cushion Seals

09 Pneumatic Cushion Seals

Type Composition Pressure Temperature Speed

AMM Polyurethane
16 Bar -30° to 80°C 1.0/sec
230 Psi -22° to 176°F 3.0'/sec

AMV Polyurethane
16 Bar -30° to 80°C 1.0m /sec
230 Psi -22° to 176°F 3.0'/sec

10 Hydraulic Cushion Seals

JCS Nylon or phenolic resin Replacement part for Asian construction equipment only.

05/06
v
NRS294-Index Pages 8/30/05 2:13 PM Page vi

NR
Designs
NR S E A L S
S E A L S
Rod Seals

11 Hydraulic Seals
Type Composition Pressure Temperature Speed

RS Polyurethane
asymetrical 400 Bar -40° to 105°C 0.8m /sec
6,000 Psi -40° to 221°F 2.5'/sec

RSL Polyurethane
asymetrical 400 Bar -40° to 105°C 0.8m /sec
Twin lip design 6,000 Psi -40° to 221°F 2.5'/sec

RSLA Polyurethane
asymetrical 400 Bar -40° to 105°C 0.8m /sec
Polyacetal AE ring 6,000 Psi -40° to 221°F 2.5'/sec

RSS Polyurethane
Symmetrical 400 Bar -40° to 105°C 0.8m /sec
6,000 Psi -40° to 221°F 2.5'/sec

MAD Polyurethane
Symmetrical 400 Bar -30° to 100°C 0.8m /sec
6,000 Psi -22° to 212°F 2.5'/sec

TS Polyurethane
Symmetrical 400 Bar -40° to 105°C 0.8m /sec
6,000 Psi -40° to 221°F 2.5'/sec

TSL Polyurethane
Twin lip 400 Bar -40° to 105°C 0.8m /sec
6,000 Psi -40° to 221°F 2.5'/sec

TSLA Polyurethane
Polyacetal AE ring 400 Bar -40° to 105°C 0.8m /sec
Twin Lip 6,000 Psi -40° to 221°F 2.5'/sec

CP NBR fabric
400 Bar -30° to 100°C 0.5m /sec
6,000 Psi -22° to 212°F 1.5'/sec

CPI NBR fabric

Polyacetal AE ring 400 Bar -30° to 100°C 0.5m /sec
6,000 Psi -22° to 212°F 1.5'/sec

19M Nylon or PTFE Used in conjunction with Rod and/or Piston U-Rings.

vi 05/06
NRS294-Index Pages 8/30/05 2:13 PM Page vii

Designs
NR
S E A L S
Rod Seals

12 Glide & Buffer Rings

Type Composition Pressure Temperature Speed

GR2 Filled PTFE flat face

NBR o-ring 400 Bar -40° to 110°C 4.0m /sec
6,000 Psi -40° to 230°F 12.0'/sec

GR3 Filled PTFE

stepped face 350 Bar -40° to 110°C 4.0m /sec
NBR o-ring 5,000 Psi -40° to 230°F 12.0'/sec

GR5 Filled PTFE

stepped face 350 Bar -20° to 200°C 4.0m /sec
Viton o-ring 5,000 Psi -4° to 392°F 12.0'/sec

GRU Polyurethane ring

350 Bar -40° to 105°C 0.8m /sec
5,000 Psi -40° to 221°F 2.5'/sec

HBY Polyurethane buffer

Nylon AE ring 500 Bar -40° to 105°C 0.8m /sec
7,000 Psi -40° to 221°F 2.5'/sec

13 V Pack Sets

VS1 NBR fabric

700 Bar -30° to 100°C 0.5m /sec
10,000 Psi -22° to 212°F 1.5'/sec

SM1 Hytrel top

NBR element 700 Bar -40° to 130°C 0.5m /sec
Polyacetal AE ring 10,000 Psi -40° to 266°F 1.5'/sec

05/06
vii
NRS294-Index Pages 8/30/05 2:13 PM Page viii

NR
Designs
NR
S E A L S
S E A L S
Rod Seals

14 Pneumatic Seals
Type Composition Pressure Temperature Speed

GSP Polyurethane
Asymmetrical 16 Bar -30° to 80°C 1.0m /sec
230 Psi -22° to 176°F 3.0'/sec

DI NBR
Asymmetrical 115 Bar -30° to 100°C 0.5m /sec
1,500 Psi -22° to 212°F 1.5'/sec

U-70 NBR 70 Shore A

Symmetrical 16 Bar -30° to 100°C 0.5m /sec
230 Psi -22° to 212°F 1.5'/sec

U-90 NBR 90 Shore A

Symmetrical 85 Bar -30° to 100°C 0.5m /sec
1,250 Psi -22° to 212°F 1.5'/sec

15 Pneumatic Seal & Wiper Combination

RBP Polyurethane
16 Bar -30° to 80°C 1.0m /sec
230 Psi -22° to 176°F 3.0'/sec

RCA Polyurethane
16 Bar -30° to 80°C 1.0m /sec
230 Psi -22° to 176°F 3.0'/sec

viii 05/06
NRS294-Index Pages 8/30/05 2:13 PM Page ix

Designs
NR
S E A L S
Rod Wipers

16 Inserted & Metal Encased

Type Composition Pressure Temperature Speed

CSW Nylon
M0S2 filler -40° to 100°C 5.0m /sec
Inserted -40° to 212°F 15.0'/sec

DH Polyurethane
Twin lip design -30° to 100°C 1.0m/sec
Inserted -22° to 212°F 3.0'/sec

DSI Polyurethane
Inserted -30° to 100°C 1.0m/sec
-22° to 212°F 3.0'/sec

PW Polyurethane
Inserted -40° to 105°C 0.8m/sec
-40° to 221°F 2.5'/sec

PWF Polyurethane
Inserted -40° to 105°C 0.8m/sec
-40° to 221°F 2.5'/sec

PWM NBR
Inserted -30° to 100°C 3.0m/sec
-22° to 212° 9.0'/sec

PWS NBR
Inserted -30° to 100°C 3.0m/sec
-22° to 212°F 9.0'/sec

RBP Polyurethane
Inserted 16 Bar -30° to 80°C 1.0m/sec
230 Psi -22° to 176°F 3.0'/sec

RCA Polyurethane
Inserted 16 Bar -30° to 80°C 1.0m/sec
230 Psi -22° to 176°F 3.0'/sec

RTI Polyurethane
Inserted -40° to 105°C 0.8m/sec
-40° to 221°F 2.5'/sec

RTL Polyurethane
Inserted -40° to 105°C 0.8m/sec
-40° to 221°F 2.5'/sec

05/06
ix
NRS294-Index Pages 8/30/05 2:13 PM Page x

NR
Designs
NR S E A L S
S E A L S
Rod Wipers

16 Inserted & Metal Encased

Type Composition Pressure Temperature Speed

SDK Polyurethane or NBR

Inserted -30° to 100°C 1.0m/sec
-22° to 212°F 3.0'/sec

WTN PTFE wiper ring

NBR o-ring -30° to 120°C 15.0m/sec
Inserted -22° to 250°F 50.0'/sec

WTV PTFE wiper ring

Viton o-ring -20° to 200°C 15.0m/sec
Inserted -4º to 392ºC 50.0'/sec

DKB NBR wiper

Metal Encased -30° to 105°C 3.0m/sec
-22° to 220°F 9.0'/sec

DKBI Polyurethane
Metal Encased -30° to 105°C 3.0m/sec
-22° to 220°F 9.0'/sec

DKI Polyurethane
Metal Encased -30° to 105°C 3.0m/sec
-22° to 220°F 9.0'/sec

MCR NBR
Metal Encased -30° to 105°C 3.0m/sec
-22° to 220°F 9.0'/sec

MCU Polyurethane
Metal Encased -30° to 105°C 3.0m/sec
-22° to 220°F 9.0'/sec

MPW NBR
Metal Encased -30° to 105°C 3.0m/sec
-22° to 220°F 9.0'/sec

x 05/06
NRS294-Index Pages 8/30/05 2:13 PM Page xi

Designs
NR
S E A L S
Bearings

17 Bearing Rings & Strip

Type Composition Dynamic Load Temperature Speed

GT Bronze filled
PTFE Strip 15N/mm2 -50° to 200°C 5.0m /sec
@ 25°C Max -58° to 392°F 15.0'/sec

B1 Glass filled
Nylon rings 45N/mm2 -40° to 120°C 3.0m /sec
@ 25°C Max -40° to 250°F 9.0'/sec

B6 Glass filled
Acetal rings 40N/mm2 -40° to 110°C 3.0m /sec
@ 25°C Max -40° to 230°F 9.0'/sec

B8 Phenolic
Resin rings 50N/mm2 -40° to 120°C 3.0m /sec
@ 25°C Max -40° to 250°F 9.0'/sec

18 DU Bushes

DUB Steel bronze bush

PTFE coated -195° to 270°C 4.0m /sec
-319° to 518°F 12.0'/sec

05/06
xi
NRS294-Index Pages 8/30/05 2:13 PM Page xii

Designs
NR
S E A L S
Ancillary

19 O-rings, Backup Washers & Quad Rings

Type Composition Pressure Temperature

2- NBR70 O-ring Imperial

3- NBR70 O-ring Metric 400 Bar -40° to 110°C
6000 PSI -40° to 220°F

2- NBR90 O-ring Imperial

3- NBR90 O-ring Metric 400 Bar -40° to 110°C
6000 PSI -40° to 220°F

Polyurethane
2- O-ring Imperial 400 Bar -40° to 110°C
3- O-ring Metric 6000 PSI -40° to 220°F

2- Viton O-ring Imperial

3- Viton O-ring Metric 400 Bar -40° to 110°C
6000 PSI -40° to 220°F

4- NBR70 Quad rings

Imperial corresponding 400 Bar -40° to 110°C
to BS1806 / AS568 6000 PSI -40° to 220°F

8- NBR90 backup washer

Imperial contoured 400 Bar -40° to 110°C
6000 PSI -40° to 220°F

8- Polyurethane
BU washer 400 Bar -40° to 110°C
Imperial 6000 PSI -40° to 220°F

8- Hytrel BU washer Imp.

9- Hytrel BU washer Met. 400 Bar -40° to 110°C
6000 PSI -40° to 220°F

8- PTFE BU washer Imp.

9- PTFE BU washer Met. 400 Bar -40° to 110°C
6000 PSI -40° to 220°F

xii 05/06
NRS294-Index Pages 8/30/05 2:13 PM Page xiii

Designs
NR
S E A L S
Ancillary

20 Grab Kits, Tools, Flange Seals, Bonded Washers

& Rotary Joint Seals
Type Composition Pressure Temperature Speed

ab K it s
GK O-rings, Backups
Gr

Bonded washers
Flange seals

CFS Rubber element

Hytrel support 400 Bar -40° to 110°C 0.8 m/sec
Acetal wear rings 6000 PSI -40° to 220°F 1.5'/sec

BW Rubber element
Hytrel support
Acetal wear rings

RJS NBR element

Rubber fabric support 350 Bar -40° to 110°C
Acetal wear rings 5000 PSI -40° to 230°F

05/06
xiii
NRS294-Index Pages 8/30/05 2:13 PM Page xiv
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 1

DAS
NR
Piston Seals

S E A L S

Design
Double acting seals

DAS are primarily used on one piece pistons, the five part
assembly consists of an endless precision moulded Nitrile
rubber sealing element supported at each side with anti-
extrusion angle split support rings made of Polyester. The
support rings are designed to accommodate split Polyacetal
anti-extrusion bearing rings. This design allows the anti-
extrusion bearing rings to react to increasing cylinder bores
as pressures rise. The final assembly achieves a robust
sealing unit designed for work at higher pressures. DAS are
also suitable for use on two piece pistons of the same
housing dimensions.
Key Features
Medium duty Operating Conditions

One piece piston Pressure

400 Bar
Relatively compact 6,000 Psi

Temperature
Easy assembly
-40° to 110°C
-40° to 230°F
Medium / high pressure
Speed
capability
0.5m /sec
1.5'/sec

Surface Finish µmRa

ØD ( 0.1 to 0.25 μmRa) ØD Ød1 Ød2 Ød3 L1 L2
Ød1 ( ≤ 0.8 μmRa)
0.1 to 0.25 ≤0.8 1.0 2.0 2.0 2.0

C/S
Tolerances
ØD Ød1 Ød2 Ød3 L1 L2
H10 -0.0 -0.05 -0.2 -0.0 -0.1
+0.1 +0.00 +0.2 +0.2 +0.1
L2
Chamfer Radii
C/S 5.0 8.0 10.0 12.5 15.0
L1 r2 r1
C 2.4 5.0 5.0 6.5 7.5
r1 0.4 0.4 0.4 0.8 0.8
L2
r2 0.4 0.4 0.4 0.4 0.4

Typical Examples
Reciprocating Rotary Oscillating Helix
Ød2

Ød3

Similar Styles
C

25º

05/06 01/1
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 2

DAS
NR
Piston Seals

S E A L S

Design
Double acting seals

DAS are primarily used on one piece pistons, the five part
assembly consists of an endless precision moulded Nitrile
rubber sealing element supported at each side with anti-
extrusion angle split support rings made of Polyester. The
support rings are backed up by full depth Polyacetal anti-
extrusion bearing rings. The final assembly achieves a
robust sealing unit designed for work at higher pressures.
DAS are also suitable for use on two piece pistons of the
same housing dimensions.

Key Features
Medium duty Operating Conditions

One piece piston Pressure

400 Bar
Relatively compact 6,000 Psi

Temperature
Easy assembly
-40° to 110°C
-40° to 230°F
Medium / high pressure
Speed
capability
0.5m /sec
1.5'/sec

Surface Finish µmRa

ØD ( 0.1 to 0.25 μmRa) ØD Ød1 Ød2 Ød3 L1 L2
0.1 to 0.25 ≤0.8 1.0 2.0 2.0 2.0
Ød1 ( ≤ 0.8 μmRa)

C/S
Tolerances
ØD Ød1 Ød2 Ød3 L1 L2
H10 -0.0 -0.05 -0.2 -0.0 -0.1
+0.1 +0.00 +0.2 +0.2 +0.1
L2
Chamfer Radii
C/S 5.0 8.0 10.0 12.5 15.0
L1 r2 r1
C 2.4 5.0 5.0 6.5 7.5
r1 0.4 0.4 0.4 0.8 0.8
L2 r2 0.4 0.4 0.4 0.4 0.4

Typical Examples
Reciprocating Rotary Oscillating Helix
Ød2

Ød3

Similar Styles
C

25º

01/2 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 3

SPE
NR
Piston Seals

S E A L S

Design
Double acting seals

SPE are primarily used on one piece pistons, the five part
assembly consists of an endless precision moulded Nitrile
rubber sealing element supported at each side with anti-
extrusion angle split support rings made of Polyester. The
support rings are designed to accommodate split Polyacetal
anti-extrusion rings. This design allows the anti-extrusion
rings to react to increasing cylinder bores as pressures rise.
The final assembly achieves a robust sealing unit designed
for work at higher pressures. SPE are also suitable for use on
two piece pistons of the same housing dimensions.

Key Features
Medium to heavy duty Operating Conditions

One piece piston Pressure

400 Bar
Compact piston 6,000 Psi

Temperature
Higher pressure capability
-40° to 110°C
-40° to 230°F

Speed
0.5m /sec
1.5'/sec

Surface Finish µmRa

ØD ØD Ød1 L1
0.1 to 0.25 ≤0.8 2.0
Ød1

C/S
Tolerances
ØD Ød1 G L
H10 -0.0 0.25 -0.00
+0.1 +0.20
G
Chamfer Radii
C/S 5.0 8.0 10.0 12.5 15.0
L1 r1
C 2.4 5.0 5.0 6.5 7.5
r1 0.4 0.4 0.4 0.8 0.8
G

Typical Examples
Reciprocating Rotary Oscillating Helix

25º

05/06 01/3
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 4

DSM
NR
Piston Seals

S E A L S

Design
Double acting seals

DSM piston seal is a five piece assembly, consisting of a

Nitrile rubber sealing element supported by two
thermoplastic elastomer headers with Polyacetal anti-
extrusion bearing rings on the outside diameter. The
complete assembly forms a highly robust sealing unit for use
in high pressure applications where shock loads and
pressure spikes are present. The rubber element has
grease/oil retaining grooves to help reduce friction and wear.
The two thermoplastic elastomer headers can be angle cut to
ease fitting if required.

Key Features
Heavy duty Operating Conditions

One piece piston Pressure

700 Bar
Solid 5 part design 10,000 Psi

Temperature
High pressure capability
-40° to 130°C
-40° to 266°F
Shock load resistant
Speed
0.5m /sec
1.5'/sec

Surface Finish µmRa

ØD ØD Ød1 Ød2 Ød3 L1 L2
0.1 to 0.25 ≤0.8 1.0 2.0 2.0 2.0
Ød1

C/S
Tolerances
ØD Ød1 Ød2 Ød3 L1 L2
H11 H10 -0.05 -0.07 -0.0 -0.0
+0.05 +0.07 +0.2 +0.1
L2
Chamfer Radii
C/S 8 10 12.5
L1 r 2 r1
C 5.0 5.0 6.5
r1 0.4 0.4 0.4
45° x 0.75mm

L2 r2 0.2 0.4 0.4

Typical Examples
Reciprocating Rotary Oscillating Helix
Ød2

Ød3

25º

01/4 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 5

DPS
NR
Piston Seals

S E A L S

Design
Double acting seals

DPS are particularly suitable for double acting hydraulic

cylinders subjected to severe thermal and mechanical
conditions generated by high speed and pressure. Fabric
reinforcement with high mechanical strength, optimum
thermal stability and lubricating properties are incorporated
over the whole dynamic contact area of the sealing element
and extended radially inwards for additional extrusion
resistance. Bearing/anti-extrusion rings in Polyacetal resin
give improved stability and increase resistance to distortion
and extrusion. DPS seals provide a wide bearing surface,
maximum stability with fabric reinforcement protecting the
Key Features elastomeric element from excessive distortion.

Medium duty Operating Conditions

One piece piston Pressure

350 Bar
Relatively compact 5,000 Psi

Temperature
Easy assembly
-40° to 110°C
-40° to 230°F
Medium / high pressure
Speed
capability
0.5m /sec
1.5'/sec

Surface Finish µmRa

ØD ØD Ød1 Ød2 Ød3 L1 L2
0.1 to 0.25 ≤0.8 1.0 2.0 2.0 2.0
Ød1

C/S
Tolerances
ØD Ød1 Ød2 Ød3 L1 L2
H11 -0.0 -0.05 -0.2 -0.0 -0.0
+0.15 +0.05 +0.2 +0.2 +0.1
L2
Chamfer Radii
C/S 5.0 7.5 8.5 10.0
L1 r 2 r1
C 2.4 5.0 5.0 5.0
r1 0.4 0.4 0.4 0.4
L2 r2 0.2 0.2 0.2 0.2

Typical Examples
Reciprocating Rotary Oscillating Helix
Ød2

Ød3

Similar Styles
C

25º

05/06 01/5
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 6

EUD
NR
Piston Seals

S E A L S

Design
Double acting seals

EUD are primarily used on one piece pistons, the four part assembly
consists of a central dynamic sealing element made from
Polyurethane, a Nitrile rubber rectangular energiser and sealing
element and two integral bearing/anti-extrusion rings from
Polyacetal resin. The cross section design of the Polyurethane
element ensures the applied pressure is directly related to the load
applied by the elastomeric ring. Therefore the seal load on the
cylinder bore is uniform and proportional to the hydraulic pressure.
As the guide/anti-extrusion rings are integral there is no need for
separate bearing rings. The final assembly achieves a robust sealing
unit designed for work at higher pressures. EUD are also suitable for
Key Features use on two piece pistons of the same housing dimensions.

Medium duty Operating Conditions

One piece piston Pressure

400 Bar
Relatively compact 6,000 Psi

Temperature
Easy assembly
-40° to 110°C
-40° to 230°F
Medium / high pressure
Speed
capability
0.5m /sec
1.5'/sec

Surface Finish µmRa

ØD ØD Ød1 Ød2 Ød3 L1 L2
0.1 to 0.25 ≤0.8 1.0 2.0 2.0 2.0
Ød1

C/S
Tolerances
ØD Ød1 Ød2 Ød3 L1 L2
H11 -0.0 -0.05 -0.2 -0.0 -0.0
+0.15 +0.05 +0.2 +0.2 +0.1
L2
Chamfer Radii
C/S 6.0 7.0 8.5
L1 r 2 r1
C 4.0 5.0 6.0
r1 0.4 0.4 0.4
L2 r2 0.2 0.2 0.2

Typical Examples
Reciprocating Rotary Oscillating Helix
Ød2

Ød3

Similar Styles
C

25º

01/6 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 7

SPL
NR
Piston Seals

S E A L S

Design
Double acting seals

SPL five part assembly comprises a precision moulded Nitrile

rubber sealing element with endless PTFE anti-extrusion
rings to the outside diameter. These rings are designed to be
pre loaded on assembly, providing a more positive seal. Split
Polyacetal anti-extrusion bearing rings are added on either
side to provide support for the piston head. This compact
one piece piston seal has proven effective over a wide range
of applications.

Key Features
Light to medium duty Operating Conditions

One piece piston Pressure

250 Bar
Compact design 3,750 Psi

Temperature
Easy assembly
-30° to 80°C
-22° to 176°F
Low pressure sealing
Speed
0.5m /sec
1.5'/sec

Surface Finish µmRa

ØD ØD Ød1 Ød2 Ød3 L1 L2
0.1 to 0.25 ≤0.8 1.0 2.0 2.0 2.0
Ød1

C/S
Tolerances
ØD Ød1 Ød2 Ød3 L1 L2
H10 h9 h9 h9 -0.0 -0.13
+0.27 +0.0
L2
Chamfer Radii
C/S 3.75 4.5 5.0 6.5
L1 r 2 r1
C 2.0 2.5 3.0 4.0
r1 0.2 0.2 0.2 0.4
L2 45º x 1mm
r2 0.2 0.2 0.2 0.4

Typical Examples
Reciprocating Rotary Oscillating Helix
Ød2

Ød3

Similar Styles
C

25º

05/06 01/7
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 8

DPWL
NR
Piston Seals

S E A L S

Design
Double acting seals

DPWL is for use on split pistons. This precision moulded Nitrile

rubber element is bonded with rubberised fabric reinforcements
and with additional full width Polyacetal anti-extrusion rings at each
end to allow for larger machining clearances between piston head
and cylinder bore and higher system pressures. Designed with
enough radial interference to effectively seal at low pressure, its
cross section is taller and narrower than its housing. Can appear to
have too much room after fitting to piston however this allows for
dramatic expansion upon assembly. Rubberised fabric has the
advantage of retaining the sealing media within its surface,
reducing friction and wear.
Key Features
Medium to heavy duty Operating Conditions

Split piston Pressure

400 Bar
Will tolerate 6,000 Psi

contamination Temperature
-30° to 100°C
High load capability -22° to 212°F

Speed
Proven robust design
0.5m /sec
1.5'/sec

ØD Surface Finish µmRa

Ød1 ØD Ød1 Ød2 Ød3 L1 L2

0.1 to 0.25 ≤0.8 1.0 2.0 2.0 2.0
C/S

Tolerances
ØD Ød1 Ød2 Ød3 L1 L2
H11 js11 h9 js11 -0.0 -0.0
+0.25 +0.15
L2

Chamfer Radii
L1 r 2 r1 C/S 5.0 7.5 10.0 12.5
C 3.0 4.0 5.0 6.5
L2 r1 0.2 0.2 0.2 0.4
45° x 1mm

r2 0.2 0.2 0.2 0.4

Typical Examples
Reciprocating Rotary Oscillating Helix
Ød2

Ød3

Similar Styles
C

25º

01/8 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 9

DPW
NR
Piston Seals

S E A L S

Design
Double acting seals

DPW is for use on split pistons. This precision moulded Nitrile rubber
element is bonded with rubberised fabric reinforcements. Fitted to the
outside diameter at each edge are Polyacetal anti-extrusion rings to allow
larger machining clearances between the piston head and cylinder bore
and also higher working pressures. The Polyacetal bearing rings also
support the piston head under side load conditions preventing metal to
metal contact. The bearings, being an integral part of the unit, react
quickly to increasing pressures closing the extrusion gap. Designed with
enough radial interference to effectively seal at low pressure, its cross
section is taller and narrower than its housing. Can appear to have too
much room after fitting to piston however this allows for dramatic

Key Features expansion upon assembly. Rubberised fabric has the advantage of
retaining the sealing media within its surface, reducing friction and wear.

Medium to heavy duty Operating Conditions

Split piston Pressure

400 Bar
Proven robust design 6,000 Psi

Temperature
Will tolerate
-30° to 100°C
contamination -22° to 212°F

Speed
Pressure activated
0.5m /sec
bearing rings 1.5'/sec

Surface Finish µmRa

ØD ØD Ød1 Ød2 Ød3 L1 L2
0.1 to 0.25 ≤0.8 1.0 2.0 2.0 2.0
Ød1

C/S
Tolerances
ØD Ød1 Ød2 Ød3 L1 L2
H11 js11 js10 js11 -0.0 -0.0
+0.25 +0.1
L2
Chamfer Radii
C/S 6.5 8.0 10.0 12.5 15.0
L1 r2 r1
C 2.5 4.0 5.0 6.5 7.5
r1 0.4 0.4 0.8 1.2 1.2
45° x 1mm

L2 r2 0.2 0.2 0.2 0.4 0.4

Typical Examples
Reciprocating Rotary Oscillating Helix
Ød2

Ød3

Similar Styles
C

25º

05/06 01/9
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 10
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 11

Double Acting
Piston Seals
DAS DAS SPE DSM DPS EUD

SPL DPWL DPW DPE DP

Bore Dia Hsg Dia Hsg Ln Brg Ln Brg Dia Piston Dia
ØD Ød1 L1 L2 Ød2 Ød3 Euro Ref Product Code

20.00 11.00 13.50 2.10 17.00 19.00 078043 DAS-020011-135

22.00 13.00 13.50 2.10 19.00 21.00 086051 DAS-022013-135

25.00 15.00 12.50 4.00 21.00 23.00 098059 DAS-025015-125/1

ISO 15.00 12.50 4.00 22.00 24.00 098059 DAS-025015-125/2

15.00 16.40 6.35 21.45 23.50 098059 DAS-025015-164

15.00 16.40 098059 SPE-025015-164

16.00 13.50 2.10 22.00 24.00 098063 DAS-025016-135

ISO 17.00 10.00 4.00 22.00 24.00 098066 DPS-025017-100

17.50 8.63 3.25 21.30 24.00 098068 SPL-025017-085

28.00 19.00 13.63 2.00 25.00 27.00 110074 DAS-028019-135

30.00 17.00 15.40 6.35 26.50 29.00 118066 DAS-030017-154

21.00 13.50 2.10 27.00 29.00 118082 DAS-030021-135

32.00 19.00 15.40 6.35 28.50 30.90 125074 DPW-032019-154

ISO 22.00 12.50 4.00 29.00 31.00 125086 DAS-032022-125

22.00 15.50 2.60 28.00 31.00 125086 DAS-032022-155

22.00 16.40 6.35 28.50 30.50 125086 DAS-032022-164

22.00 16.40 125086 SPE-032022-164

ISO 24.00 10.00 4.00 29.00 31.00 125094 DPS-032024-100

24.00 15.50 3.20 28.00 31.40 125094 DAS-032024-155

35.00 25.00 15.50 2.60 31.00 34.00 137098 DAS-035025-155

25.00 16.40 6.35 31.40 33.50 137098 DAS-035025-164

25.00 16.40 137098 SPE-035025-164

27.00 15.50 3.20 31.00 34.40 137106 DPS-035027-155

40.00 24.00 18.40 6.35 35.40 38.50 157094 DAS-040024-184

24.00 18.40 6.35 35.40 38.65 157094 DPW-040024-184

24.00 18.40 157094 SPE-040024-184

25.00 24.00 6.00 34.80 39.00 157098 DPWL-040025-240

26.00 15.50 2.60 36.00 39.00 157102 DAS-040026-155

30.00 11.13 4.00 35.50 39.00 157118 SPL-040030-110

30.00 12.50 4.00 36.00 38.00 157118 DAS-040030-125/1

ISO 30.00 12.50 4.00 37.00 39.00 157118 DAS-040030-125/2

30.00 12.50 157118 SPE-040030-125

30.00 16.40 6.35 35.40 38.50 157118 DAS-040030-164

05/06 01/11
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 12

L1
L2 L2

ØD
Ød3
Ød2

Ød1

NR
S E A L S

L1

Bore Dia Hsg Dia Hsg Ln Brg Ln Brg Dia Piston Dia
ØD Ød1 L1 L2 Ød2 Ød3 Euro Ref Product Code

40.00 30.00 16.40 157118 SPE-040030-164

32.00 10.00 4.00 37.00 39.00 157125 DAS-040032-100

ISO 32.00 10.00 4.00 37.00 39.00 157125 DPS-040032-100

32.00 10.00 4.20 36.00 39.00 157125 EUD-040032-100

32.00 10.00 157125 SPE-040032-100

32.00 15.50 3.20 36.00 39.40 157125 DAS-040032-155

32.00 15.50 3.20 36.00 39.40 157125 DPS-040032-155

42.00 28.00 15.50 2.60 38.00 41.00 165110 DAS-042028-155

45.00 29.00 18.40 6.35 40.40 43.70 177114 DAS-045029-184

29.00 32.00 6.35 38.80 42.85 177114 DSM-045029-320

31.00 15.50 2.60 41.00 44.00 177122 DAS-045031-155

35.00 16.40 6.35 40.40 43.50 177137 DAS-045035-164

35.00 16.40 177137 SPE-045035-164

37.00 15.50 3.20 41.00 44.40 177145 DPS-045037-155

50.00 30.00 25.40 6.35 44.30 48.30 196118 DPW-050030-254

ISO 34.00 18.40 6.35 45.40 48.50 196133 DAS-050034-184

34.00 18.40 196133 SPE-050034-184

34.00 20.50 3.10 46.00 49.00 196133 DAS-050034-205

34.00 32.00 6.35 43.77 47.85 196133 DSM-050034-320

ISO 35.00 20.00 5.00 46.00 48.50 196137 DAS-050035-200

35.00 24.00 6.00 44.80 48.50 196137 DPWL-050035-240

38.00 20.50 4.20 46.00 49.40 196149 DAS-050038-205

38.00 20.50 4.20 46.00 49.40 196149 EUD-050038-205

40.00 11.13 4.00 45.50 49.00 196157 SPL-050040-110

40.00 12.50 4.00 47.00 49.00 196157 DAS-050040-125

40.00 12.50 4.20 46.00 49.00 196157 EUD-050040-125

55.00 39.00 18.40 6.35 50.36 53.50 216153 DAS-055039-184

39.00 20.50 3.10 51.00 54.00 216153 DAS-055039-205

40.00 24.00 6.00 49.80 53.50 216157 DPWL-055040-240

40.00 32.00 6.35 48.77 52.85 216157 DSM-055040-320

43.00 20.50 4.20 51.00 54.40 216169 EUD-055043-205

45.00 11.13 4.00 50.50 54.00 216177 SPL-055045-110

56.00 40.00 20.50 3.10 52.00 55.00 220157 DAS-056040-205

01/12 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 13

Double Acting
Piston Seals
DAS DAS SPE DSM DPS EUD

SPL DPWL DPW DPE DP

Bore Dia Hsg Dia Hsg Ln Brg Ln Brg Dia Piston Dia
ØD Ød1 L1 L2 Ød2 Ød3 Euro Ref Product Code

60.00 40.00 31.00 7.00 53.80 58.50 236157 DPWL-060040-310

44.00 18.40 6.35 55.40 58.50 236173 DAS-060044-184

44.00 18.40 236173 SPE-060044-184

44.00 20.50 3.10 56.00 59.00 236173 DAS-060044-205

44.00 32.00 6.35 53.80 57.80 236173 DSM-060044-320

45.00 22.50 236177 SPE-060045-225

48.00 20.50 4.20 56.00 59.40 236188 DAS-060048-205

48.00 20.50 4.20 56.00 59.40 236188 EUD-060048-205

63.00 47.00 18.40 6.35 58.40 61.50 248185 DAS-063047-184

47.00 19.40 6.35 58.40 61.50 248185 DAS-063047-194

47.00 20.50 3.10 59.00 62.00 248185 DAS-063047-205

47.00 32.00 6.35 56.74 60.81 248185 DSM-063047-320

ISO 48.00 20.00 5.00 59.00 61.50 248188 DAS-063048-200

48.00 24.00 6.00 57.80 61.50 248188 DPWL-063048-240

51.00 20.50 4.20 59.00 62.40 248200 DAS-063051-205

51.00 20.50 4.20 59.00 62.40 248200 EUD-063051-205

53.00 11.13 4.00 58.50 61.50 248208 SPL-063053-110

ISO 53.00 12.50 4.00 60.00 62.00 248208 DAS-063053-125

65.00 49.00 20.50 3.10 61.00 64.00 255192 DAS-065049-205

49.00 32.00 6.35 58.70 62.80 255192 DSM-065049-320

50.00 18.40 6.35 60.40 63.50 255196 DAS-065050-184

53.00 20.50 4.20 61.00 64.40 255208 DPS-065053-205

53.00 20.50 4.20 61.00 64.40 255208 EUD-065053-205

70.00 50.00 22.40 275196 DPE-070050-220

50.00 22.40 6.35 64.20 68.30 275196 DAS-070050-224

50.00 31.00 7.00 63.80 68.00 275196 DPWL-070050-310

50.00 35.00 9.52 62.62 67.54 275196 DSM-070050-350

54.00 20.50 3.10 66.00 69.00 275212 DAS-070054-205

55.00 22.50 275216 SPE-070055-225

58.00 20.50 4.20 66.00 69.40 275228 DAS-070058-205

58.00 20.50 4.20 66.00 69.40 275228 EUD-070058-205

75.00 55.00 22.40 6.35 69.20 73.30 295216 DAS-075055-224

55.00 35.00 9.52 67.70 72.54 295216 DSM-075055-350

05/06 01/13
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 14

L1
L2 L2

ØD
Ød3
Ød2

Ød1

NR
S E A L S

L1

Bore Dia Hsg Dia Hsg Ln Brg Ln Brg Dia Piston Dia
ØD Ød1 L1 L2 Ød2 Ød3 Euro Ref Product Code

75.00 59.00 20.50 3.10 71.00 74.00 295232 DAS-075059-205

63.00 20.50 4.20 71.00 74.40 295248 DPS-075063-205

78.00 68.00 16.20 6.35 74.20 77.00 307267 DAS-078068-162

80.00 60.00 22.40 6.35 74.15 78.30 314236 DAS-080060-224

60.00 22.40 6.35 74.20 78.30 314236 DPC-080060-224

60.00 22.40 314236 SPE-080060-224

ISO 60.00 25.00 6.35 75.00 78.00 314236 DAS-080060-250

60.00 31.00 7.00 73.80 78.00 314236 DPWL-080060-310

60.00 35.00 9.52 72.62 77.52 314236 DSM-080060-350

62.00 22.50 3.60 76.00 79.00 314244 DAS-080062-225

62.00 22.50 314244 SPE-080062-225

64.00 32.00 9.52 72.62 77.52 314251 DSM-080064-320

ISO 65.00 20.00 5.00 76.00 78.50 314255 DPS-080065-200

65.00 22.50 6.35 74.15 78.35 314255 DAS-080065-225

65.00 22.50 314255 SPE-080065-225

66.00 22.50 5.20 76.00 79.40 314259 DAS-080066-225

66.00 22.50 5.20 76.00 79.40 314259 EUD-080066-225

70.00 11.13 4.00 75.50 78.50 314275 SPL-080070-110

85.00 65.00 22.40 6.35 79.15 83.30 334255 DAS-085065-224

65.00 22.40 334255 SPE-085065-224

65.00 35.00 9.52 77.62 82.54 334255 DSM-085065-350

71.00 22.50 5.20 81.00 84.40 334279 DPS-085071-225

71.00 22.50 5.20 81.00 84.40 334279 EUD-085071-225

90.00 70.00 22.40 6.35 84.15 88.30 354275 DAS-090070-224

70.00 30.00 354275 SPE-090070-300

70.00 31.00 7.00 83.80 88.00 354275 DPWL-090070-310

70.00 35.00 9.52 82.58 87.79 354275 DSM-090070-350

72.00 22.50 3.60 86.00 89.00 354283 DAS-090072-225

72.00 22.50 354283 SPE-090072-225

74.00 32.00 9.52 82.87 87.79 354291 DSM-090074-320

75.00 20.00 5.00 86.00 88.50 354295 DAS-090075-200

75.00 20.00 354295 SPE-090075-200

76.00 22.50 5.20 86.00 89.40 354299 DAS-090076-225

01/14 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 15

Double Acting
Piston Seals
DAS DAS SPE DSM DPS EUD

SPL DPWL DPW DPE DP

Bore Dia Hsg Dia Hsg Ln Brg Ln Brg Dia Piston Dia
ØD Ød1 L1 L2 Ød2 Ød3 Euro Ref Product Code

90.00 76.00 22.50 5.20 86.00 89.40 354299 EUD-090076-225

92.00 82.00 12.40 6.35 78.00 91.00 362322 DAS-092082-124

95.00 75.00 22.40 6.35 89.15 93.30 374295 DAS-095075-224

75.00 22.40 374295 SPE-095075-224

75.00 35.00 9.52 87.60 92.50 374295 DSM-095075-350

100.00 75.00 22.40 6.35 93.13 98.00 393295 DAS-100075-224

75.00 25.40 6.35 93.15 98.00 393295 DPW-100075-250

80.00 22.40 6.35 94.15 98.35 393314 DPW-100080-224

ISO 80.00 25.00 6.35 95.00 98.00 393314 DAS-100080-250

80.00 25.40 393314 DPE-100080-250

ISO 80.00 25.40 6.35 94.15 98.30 393314 DAS-100080-254

80.00 25.40 6.35 94.15 98.35 393314 DPW-100080-250

80.00 30.00 6.35 94.15 98.35 393314 DAS-100080-300

80.00 30.00 393314 SPE-100080-300

80.00 31.00 7.00 93.80 98.00 393314 DPWL-100080-310

80.00 35.00 9.52 92.60 97.50 393314 DSM-100080-350

82.00 22.50 3.60 96.00 99.00 393322 DAS-100082-225

ISO 85.00 20.00 5.00 96.00 98.50 393334 DAS-100085-200

ISO 85.00 20.00 5.00 96.00 98.50 393334 DPS-100085-200

86.00 22.50 5.20 96.00 99.40 393338 DAS-100086-225

86.00 22.50 5.20 96.00 99.40 393338 EUD-100086-225

87.00 14.13 6.00 93.80 98.50 393342 SPL-100087-141

105.00 80.00 22.40 6.35 98.10 103.00 413314 DAS-105080-224

80.00 22.40 413314 SPE-105080-224

92.50 14.70 6.35 98.80 103.40 413362 DAS-105092-143

110.00 85.00 22.40 6.35 103.10 108.00 433334 DAS-110085-224

85.00 25.40 6.35 103.10 108.00 433334 DPW-110085-250

85.00 25.40 6.35 103.10 108.00 433334 DAS-110085-254

85.00 45.00 12.70 101.82 107.33 433334 DSM-110085-450

ISO 90.00 25.40 6.35 104.15 108.30 433354 DPW-110090-254

90.00 30.00 6.35 103.10 108.00 433354 DAS-110090-300

90.00 30.00 433354 SPE-110090-300

90.00 35.00 9.52 102.70 107.51 433354 DSM-110090-350

05/06 01/15
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 16

L1
L2 L2

ØD
Ød3
Ød2

Ød1

NR
S E A L S

L1

Bore Dia Hsg Dia Hsg Ln Brg Ln Brg Dia Piston Dia
ØD Ød1 L1 L2 Ød2 Ød3 Euro Ref Product Code

110.00 92.00 22.50 3.60 106.00 109.00 433362 DAS-110092-225

96.00 22.50 5.20 106.00 109.40 433377 DAS-110096-225

96.00 22.50 5.20 106.00 109.40 433377 EUD-110096-225

115.00 90.00 22.40 452354 DPE-115090-220

90.00 22.40 6.35 108.10 113.00 452354 DAS-115090-224

90.00 45.00 12.70 106.82 112.33 452354 DSM-115090-450

97.00 22.50 3.60 111.00 114.00 452381 DAS-115097-225

120.00 95.00 22.40 6.35 113.10 118.00 472374 DAS-120095-224

95.00 45.00 12.70 111.82 117.33 472374 DSM-120095-450

100.00 25.40 6.35 114.10 118.30 472393 DPW-120100-250

100.00 30.00 472393 SPE-120100-300

100.00 31.00 7.00 113.80 118.00 472393 DPWL-120100-310

100.00 35.00 9.52 112.80 117.51 472393 DSM-120100-350

106.00 22.50 5.20 116.00 119.40 472417 DAS-120106-225

106.00 22.50 5.20 116.00 119.40 472417 EUD-120106-225

125.00 100.00 25.40 12.70 118.00 123.00 492393 DAS-125100-250

100.00 25.40 6.35 118.10 123.00 492393 DAS-125100-254

100.00 25.40 492393 SPE-125100-254

ISO 100.00 32.00 10.00 119.00 123.00 492393 DAS-125100-320

100.00 38.00 9.50 118.80 123.00 492393 DPWL-125100-380

100.00 45.00 12.70 116.82 122.33 492393 DSM-125100-450

103.00 26.50 5.10 121.00 124.00 492405 DAS-125103-265

ISO 105.00 25.00 6.30 120.00 123.00 492413 DAS-125105-250

ISO 105.00 25.40 6.35 119.10 123.30 492413 DAS-125105-254

108.00 26.50 7.20 121.00 124.40 492425 DAS-125108-265

112.00 14.13 6.00 118.80 123.50 492440 SPL-125112-140

130.00 105.00 25.40 9.50 122.60 127.50 511413 DAS-130105-254

105.00 25.40 6.35 123.10 128.00 511413 DAS-130105-254/1

105.00 45.00 12.70 121.82 127.33 511413 DSM-130105-450

110.00 35.00 9.52 122.70 127.33 511433 DSM-130110-350

133.00 115.00 22.40 9.52 125.60 130.50 523452 DAS-133115-224

135.00 110.00 25.40 9.50 127.60 132.50 531433 DAS-135110-254

110.00 25.40 6.35 128.10 133.00 531433 DAS-135110-254/1

01/16 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 17

Double Acting
Piston Seals
DAS DAS SPE DSM DPS EUD

SPL DPWL DPW DPE DP

Bore Dia Hsg Dia Hsg Ln Brg Ln Brg Dia Piston Dia
ØD Ød1 L1 L2 Ød2 Ød3 Euro Ref Product Code

135.00 110.00 25.40 531433 SPE-135110-254

110.00 45.00 12.70 126.82 132.33 531433 DSM-135110-450

140.00 115.00 25.40 9.50 132.60 137.50 551452 DAS-140115-254

115.00 25.40 6.35 133.00 138.00 551452 DAS-140115-254/1

115.00 25.40 551452 SPE-140115-254

115.00 45.00 12.70 131.72 137.30 551452 DSM-140115-450

118.00 26.50 5.10 136.00 139.00 551464 DAS-140118-265

120.00 25.00 6.35 135.00 138.00 551472 DAS-140120-250

120.00 31.00 7.00 133.80 138.00 551472 DPWL-140120-310

120.00 35.00 9.52 132.70 137.30 551472 DSM-140120-350

123.00 26.50 7.20 136.00 139.40 551480 DAS-140123-265

123.00 26.50 7.20 136.00 139.40 551480 DPS-140123-265

123.00 26.50 7.20 136.00 139.40 551480 EUD-140123-265

145.00 120.00 25.40 9.50 137.60 142.50 570472 DAS-145120-254

120.00 25.40 6.35 138.30 142.95 570472 DAS-145120-254/1

120.00 45.00 12.70 136.72 142.30 570472 DSM-145120-450

130.00 25.40 6.35 138.30 142.50 570511 DAS-145130-254

150.00 125.00 25.40 9.50 142.60 147.50 590492 DAS-150125-254

125.00 25.40 6.35 143.00 148.00 590492 DAS-150125-254/1

125.00 45.00 12.70 141.72 147.30 590492 DSM-150125-450

128.00 26.50 5.10 146.00 149.00 590503 DAS-150128-265

133.00 26.50 7.20 146.00 149.40 590523 DAS-150133-265

155.00 130.00 25.40 9.50 147.60 152.50 610511 DAS-155130-254

130.00 25.40 6.35 148.00 153.00 610511 DAS-155130-254/1

130.00 25.40 610511 SPE-155130-254

160.00 130.00 25.40 6.35 153.00 157.50 629511 DAS-160130-254

130.00 25.40 9.50 152.60 157.50 629511 DAS-160130-254/1

130.00 25.40 629511 SPE-160130-254

135.00 25.40 9.50 152.60 157.50 629531 DAS-160135-254

ISO 135.00 32.00 10.00 154.00 158.00 629531 DAS-160135-320

135.00 45.00 12.70 151.72 157.10 629531 DSM-160135-450

138.00 26.50 5.10 156.00 159.00 629543 DAS-160138-265

ISO 140.00 25.00 6.35 155.00 158.00 629551 DAS-160140-250/1

05/06 01/17
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 18

L1
L2 L2

ØD
Ød3
Ød2

Ød1

NR
S E A L S

L1

Bore Dia Hsg Dia Hsg Ln Brg Ln Brg Dia Piston Dia
ØD Ød1 L1 L2 Ød2 Ød3 Euro Ref Product Code

ISO 160.00 140.00 25.00 6.30 155.00 158.00 629551 DPS-160140-250

143.00 26.50 7.20 156.00 159.40 629562 DAS-160143-265

143.00 26.50 7.20 156.00 159.40 629562 EUD-160143-265

165.00 135.00 45.00 12.70 158.00 162.10 649531 DSM-165135-450

140.00 25.40 9.50 157.60 162.50 649551 DAS-165140-254

143.00 26.50 5.10 161.00 164.40 649562 EUD-165143-265

170.00 140.00 25.40 6.35 162.95 167.87 669551 DPW-170140-254

140.00 45.00 12.70 163.00 167.87 669551 DSM-170140-450

145.00 25.40 12.70 161.70 167.10 669570 DAS-170145-254

148.00 26.50 5.10 166.00 169.00 669582 DAS-170148-265

175.00 145.00 35.40 6.35 167.95 172.87 688570 DPW-175145-354

150.00 25.40 12.70 166.70 172.10 688590 DAS-175150-254

150.00 25.40 9.50 167.60 172.50 688590 DAS-175150-254/1

180.00 150.00 35.40 6.35 172.95 177.87 708590 DAS-180150-354

150.00 35.40 6.35 172.95 177.87 708590 DPW-180150-354

155.00 25.40 12.70 171.70 177.10 708610 DAS-180155-254

155.00 45.00 12.70 171.60 177.10 708610 DSM-180155-450

158.00 26.50 5.10 176.00 179.00 708622 EUD-180158-265

160.00 31.40 6.35 172.95 177.87 708629 DPW-180160-314

163.00 26.50 7.20 176.00 179.40 708641 DPS-180163-265

185.00 160.00 25.40 12.70 176.70 182.10 728629 DAS-185160-254

160.00 45.00 12.70 176.72 182.10 728629 DSM-185160-450

190.00 165.00 25.40 12.70 181.70 187.00 748649 DAS-190165-254

165.00 45.00 12.70 181.72 187.10 748649 DSM-190165-450

170.00 30.40 6.35 183.00 188.00 748669 DAS-190170-305

195.00 170.00 25.40 12.70 186.70 192.00 767669 DAS-195170-254

200.00 170.00 35.40 6.35 193.00 198.00 787669 DAS-200170-354

170.00 35.40 787669 SPE-200170-354

ISO 170.00 36.00 12.50 192.00 197.00 787669 DPS-200170-360

175.00 25.40 12.70 191.60 197.00 787688 DAS-200175-254

175.00 31.50 6.60 196.00 199.00 787688 DAS-200175-315

175.00 45.00 12.70 191.72 197.10 787688 DSM-200175-450

180.00 31.50 9.20 196.00 199.40 787708 DPS-200180-315

01/18 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 19

Double Acting
Piston Seals
DAS DAS SPE DSM DPS EUD

SPL DPWL DPW DPE DP

Bore Dia Hsg Dia Hsg Ln Brg Ln Brg Dia Piston Dia
ØD Ød1 L1 L2 Ød2 Ød3 Euro Ref Product Code

210.00 185.00 25.40 12.70 201.60 207.00 826728 DAS-210185-254

185.00 45.00 12.70 201.60 207.10 826728 DSM-210185-450

220.00 190.00 35.40 6.35 212.70 217.90 866748 DAS-220190-354

195.00 25.40 12.70 211.60 217.00 866767 DAS-220195-254

195.00 45.00 12.70 211.60 217.10 866767 DSM-220195-450

200.00 31.50 9.20 216.00 219.40 866787 DPS-220200-315

230.00 205.00 25.40 12.70 221.60 227.00 905807 DAS-230205-254

205.00 45.00 12.70 221.72 227.10 905807 DSM-230205-450

240.00 213.00 30.00 11.00 231.00 238.50 944838 EUD-240213-300

215.00 25.40 12.70 231.60 237.00 944846 DAS-240215-254

215.00 45.00 12.70 231.72 237.10 944846 DSM-240215-450

250.00 220.00 35.40 6.35 242.90 247.85 984866 DAS-250220-354

ISO 220.00 36.00 12.50 242.00 247.00 984866 DAS-250220-360

220.00 44.00 12.00 243.85 248.00 984866 DPWL-250220-450

ISO 225.00 25.40 12.70 241.60 247.00 984886 DAS-250225-254

225.00 45.00 12.70 241.72 247.10 984886 DSM-250225-450

230.00 31.50 9.20 246.00 249.40 984905 DPS-250230-315

260.00 235.00 45.00 12.70 251.72 257.10 1024925 DSM-260235-450

270.00 245.00 45.00 12.70 261.72 267.10 1062965 DSM-270245-450

ISO 280.00 250.00 35.40 9.52 272.90 277.00 11021984 DAS-280250-354

255.00 45.00 12.70 271.72 277.10 11021004 DSM-280255-450

290.00 265.00 45.00 12.70 281.72 287.10 11411043 DSM-290265-450

300.00 275.00 45.00 12.70 291.72 297.10 11811082 DSM-300275-450

360.00 335.00 44.50 12.70 351.76 357.33 14171318 DSM-360335-445

05/06 01/19
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 20
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 1

KPDP
NR
Glide Rings

S E A L S

Design
Double acting seals

KPDP are a two piece double acting pneumatic piston seal.

The outer ring is made from a modified Polyester resin with
specific fillers to improve wear resistance and reduce
friction. The inner ring is usually an o-ring to BS 1806
standard in 70 Shore A Nitrile with low compression set and
high modulus of elasticity. Due to the properties of both
materials, the inner and outer rings are easy to stretch over
the piston and will return to size almost immediately for
ease of assembly into the bore.

Key Features
Dry or lubricated Operating Conditions
pneumatics Pressure
16 Bar
Lower pressures 230 Psi
Pneumatic
Compact design Temperature
-30° to 80°C
Reduced coefficient of -22° to 176°F
friction Speed
1.0m /sec
Easy to fit 3.0 '/sec

Surface Finish µmRa

ØD ØD Ød
0.1 - 0.25 ≤0.8
Ød

Tolerances
ØD Ød L G
H9 h9 +0.1 0.25

G Chamfer Radii
C/S 3.5 4.5 6.0 7.5
L r
C 2.0 2.5 3.0 4.0
G r1 0.2 0.2 0.2 0.2

Typical Examples
Reciprocating Rotary Oscillating Helix

Similar Styles
C

25º

05/06 02/1
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 2

GP2
NR
Glide Rings

S E A L S

Design
Double acting seals

GP2 are designed as high pressure, low friction double

acting piston seals for use in heavy duty hydraulic and
pneumatic applications. Standard materials are Bronze filled
PTFE with a Nitrile o-ring or square ring as the energiser. This
design results in low break out force and the ability to run at
speeds as high as 15 m/s. By changing the energiser
material it can easily become a high temperature seal at
relatively low cost.

Key Features
Medium to heavy duty Operating Conditions

One piece piston Pressure

350 Bar
Very compact 5,000 Psi

Temperature
Low friction
-40° to 110°C
Excellent wear resistance -40° to 230°F

Speed
Eliminates stiction 4.0m/sec
12.0'/sec
Good pressure capability
Surface Finish µmRa
ØD ØD Ød L
0.1 - 0.25 ≤0.8 1.0
Ød

Tolerances
ØD Ød L
H9 h9 - 0.0 + 0.2

G/2 Chamfer Radii

L r C/S 2.5 3.75 5.50 7.75 10.5 12.25
C 1.5 2.0 2.5 5.0 7.5 10.0
G/2 r1 0.3 0.5 0.8 1.2 1.6 2.0

Extrusion Gap
Pressure Bar 100 200 300 400
G 0.8 0.65 0.5 0.35

Typical Examples
Reciprocating Rotary Oscillating Helix
C

25º

02/2 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 3

GP4
NR
Glide Rings

S E A L S

Design
Double acting seals

GP4 are designed as high pressure, low friction double

acting piston seals for use in heavy duty hydraulic and
pneumatic applications. This variation of GP2 use Bronze
filled PTFE for the outer dynamic sealing ring with an
energiser ring of Viton for higher temperature applications.
This design results in low break out force and the ability to
run at speeds as high as 15 m/s. The result is an economical
high speed, high temperature double acting piston seal.

Key Features
Medium to heavy duty Operating Conditions

One piece piston Pressure

350 Bar
Cost effective high 5,000 Psi

temperature Temperature
-20° to 200°C
Very compact -4° to 392°F

Speed
Excellent wear resistance
4.0m/sec
Eliminates stiction 12.0'/sec

Surface Finish µmRa

ØD ØD Ød L
0.1 - 0.25 ≤0.8 1.0
Ød

Tolerances
ØD Ød L
H9 h9 - 0.0 + 0.2

G/2 Chamfer Radii

C/S 2.5 3.75 5.50 7.75 10.5 12.25
L r
C 1.5 2.0 2.5 5.0 7.5 10.0
G/2 r 0.3 0.5 0.8 1.2 1.6 2.0

Extrusion Gap
Pressure Bar 100 200 300 400
G 0.8 0.65 0.5 0.35

Typical Examples
Reciprocating Rotary Oscillating Helix
C

25º

05/06 02/3
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 4

GP6
NR
Glide Rings

S E A L S

Design
Double acting seals

GP6 glide rings with o-ring expanders consist of a Nitrile 70

Shore A o-ring over which sits an outer sleave of 60 Shore
D abrasion resistant liquid cast Polyurethane. They allow for
a very compact piston design, permit higher pressures than
o-rings and back up’s and are relatively easy to stretch
over one piece pistons. Unlike PTFE and Bronze/PTFE rings,
Polyurethane will snap back to size quickly and will give
longer service life due to better abrasion resistance.

Key Features
Medium duty Operating Conditions

One piece piston Pressure

500 Bar
Snap back to size 7,000 Psi

Temperature
Compact design
-40° to 110°C
-40° to 230°F
Better abrasive resistance
Speed
0.8m /sec
2.5'/sec

Surface Finish µmRa

ØD ØD Ød L
0.1 - 0.25 ≤0.8 1.0
Ød

Tolerances
ØD Ød L
H9 - 0.0 + 0.1 -0.0 + 0.2

G/2 Chamfer Radii

C/S 3.75 5.50 7.75 10.5 12.25
L r
C 2.0 2.5 5.0 7.5 10.0
G/2 r 0.5 0.8 1.2 1.6 2.0

Extrusion Gap
Pressure Bar 100 200 300 400 500
G 0.8 0.4 0.25 0.17 0.10

Typical Examples
Reciprocating Rotary Oscillating Helix
C

25º

02/4 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 5

GP8
NR
Glide Rings

S E A L S

Design
Double acting seals

GP8 two part double acting piston seals consist of a step cut
oval outer dynamic ring of glass filled Nylon with a Nitrile
rubber rectangular section energiser. The outer dynamic ring
is very tough, capable of higher pressures and some amount
of shock loading. Another advantage is the ability to pass
over ports and machined grooves, notches without harm and
are relatively easy to install.

NOTE:
Do not trim / cut Nylon ring.

Key Features
Heavy duty Operating Conditions

One piece piston Pressure

350 Bar
Higher pressure capability 5,000 Psi

Temperature
Compact design
-40° to 105°C
-40° to 220°F
Shock load resistant
Speed
Will traverse holes and slots 1.5m /sec
4.5'/sec
ØD
Surface Finish µmRa
Ød ØD Ød L
0.1 - 0.25 ≤0.8 1.0

Tolerances
ØD Ød L G op
+0.15 -0.00 +0.15 1.00 117%of L
-0.00 +0.15 -0.00
G/2

L r
Chamfer Radii
C/S 3.75 5.50 7.75 10.5 12.25
r 0.5 0.8 1.2 1.6 2.0

Typical Examples
Reciprocating Rotary Oscillating Helix

op

Similar Styles

25º
= ØD + 1/8

05/06 02/5
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 6

PHD
NR
Glide Rings

S E A L S

Design
Double acting seals

PHD are used on one piece pistons. The assembly consists

of a filled PTFE high performance outer sleeve, pre loaded
and pressure energised by a precision moulded Nitrile rubber
element. These two components are protected from
extrusion at either side by fitting two Polyacetal anti-
extrusion rings. This seal is highly resistant to shock loads
due to its excellent anti-extrusion abilities.

Key Features
Medium to heavy duty Operating Conditions

One piece piston Pressure

500 Bar
Higher pressure capability 7,500 Psi

Temperature
Compact design
-30° to 120°C
-22° to 250°F
Low stiction
Speed
High shock resistance 1.5m /sec
4.5'/sec
ØD
Surface Finish µmRa
Ød ØD Ød L
0.1 - 0.25 ≤0.8 1.0

Tolerances
ØD Ød L
H9 h9 - 0.0 + 0.2

G/2

L
Chamfer Radii
r
C/S 7.0 7.5 11.5 14
G/2
C 4.0 5.0 6.5 7.5
r 0.3 0.5 0.6 0.8

Extrusion Gap
Pressure Bar 350 450
G 1.00 0.60

Typical Examples
Reciprocating Rotary Oscillating Helix
C

25º

02/6 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 7

GP3
NR
Glide Rings

S E A L S

Design
Double acting seals

GP3 are designed as high pressure, low friction single acting

piston seals for use in heavy duty hydraulic and pneumatic
applications. Standard materials are Bronze filled PTFE with
a Nitrile o-ring or square ring as the energiser. This design
results in low break out force and the ability to run at speeds
as high as 15 m/sec. By changing the energiser material it
can easily become a high temperature seal at relatively low
cost.

Key Features
Medium to heavy duty Operating Conditions

One piece piston Pressure

350 Bar
Very compact 5,000 Psi

Temperature
Low friction
-30° to 110°C
-22° to 230°F
Excellent wear resistance
Speed
Eliminates stiction 4.0m /sec
12.0'/sec
Good pressure capability
Surface Finish µmRa
ØD ØD Ød L
0.1 - 0.25 ≤0.8 1.0
Ød

Tolerances
ØD Ød L
H9 h9 - 0.0 + 0.2

Chamfer Radii
PRESSURE

C/S 2.5 3.75 5.50 7.75 10.5 12.25

L r
C 1.5 2.0 2.5 5.0 7.5 10.0
r 0.3 0.5 0.8 1.2 1.6 2.0
G/2

Extrusion Gap
Pressure Bar 100 200 300 400
G 0.8 0.65 0.5 0.35

Typical Examples
C Reciprocating Rotary Oscillating Helix

25º

05/06 02/7
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 8
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 9

Double Acting
Glide Rings
KPDP GP2 GP4 GP6

GP8 PHD GP3 (Made to order)

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød NOM L KPDP GP2/3 GP4 GP6 GP8 PHD Size Code

8.00 3.00 1.90 2.20 • • 008003-022

10.00 5.00 1.90 2.20 • • 010005-022

12.00 7.00 1.90 2.20 • • 012007-022

15.00 7.50 2.90 3.20 • 015007-032

ISO 16.00 8.50 2.90 3.20 • • • 016008-032

Airzet 9.00 2.30 2.50 • 016009-025

ISO 11.00 1.90 2.20 • 016011-022

18.00 10.50 2.90 3.20 • • 018010-032

ISO 20.00 12.50 2.90 3.20 • • • 020012-032

Airzet 13.00 2.30 2.50 020013-025

ISO 15.00 1.90 2.20 • 020015-022

22.00 14.50 2.90 3.20 • • 022014-032

24.00 16.50 2.90 3.20 • • 024016-032

ISO 25.00 14.00 3.90 4.20 • • 025014-042

ISO 17.50 2.90 3.20 • • • 025017-032
Airzet 18.00 2.30 2.50 • 025018-025

28.00 20.50 2.90 3.20 • • • 028020-032

30.00 19.00 3.90 4.20 • 030019-042

22.50 2.90 3.20 • • 030022-032

ISO 32.00 21.00 3.90 4.20 • • 032021-042

Airzet 23.00 2.80 3.00 • 032023-030

ISO 24.50 2.90 3.20 • • • 032024-032

35.00 27.20 3.40 3.60 • 035027-036

Airzet 26.00 2.80 3.00 • 035026-030

27.50 2.90 3.20 • • • 035027-032

36.00 28.50 2.90 3.20 • • 036028-032

38.00 30.50 2.90 3.20 • • • 038030-032

JIS 40.00 30.00 4.00 4.30 • 040030-043

24.50 6.00 6.30 • 040024-063

ISO 29.00 3.90 4.20 • • • 040029-042

ISO 32.50 2.90 3.20 • • 040032-032

42.00 31.00 3.90 4.20 • 042031-042

45.00 29.50 6.00 6.30 • 045029-063

05/06 02/9
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 10

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød NOM L KPDP GP2/3 GP4 GP6 GP8 PHD Size Code

45.00 34.00 3.90 4.20 • • • 045034-042

JIS 35.00 4.00 4.30 • 045035-043

Airzet 36.00 2.80 3.00 • 045036-030

48.00 37.00 3.90 4.20 • • 048037-042

49.00 38.00 3.90 4.20 • 049038-042

ISO 50.00 34.50 6.00 6.30 • • 050034-063

JIS 36.00 8.50 9.00 • 050036-090

ISO 39.00 3.90 4.20 • • • 050039-042

JIS 40.00 4.00 4.30 • 050040-043

40.00 7.50 8.00 • 050040-080

52.00 36.50 6.00 6.30 • 052036-063

41.00 3.90 4.20 • 052041-042

54.00 43.00 3.90 4.20 • 054043-042

55.00 39.50 6.00 6.30 • 055039-063

JIS 41.00 8.50 9.00 • 055041-090

44.00 3.90 4.20 • • • 055044-042

JIS 45.00 4.00 4.30 • 055045-043

57.00 46.00 3.90 4.20 • • 057046-042

49.50 2.90 3.20 • 057049-032

60.00 44.50 6.00 6.30 • • 060044-063

JIS 46.00 8.50 9.00 • 060046-090

49.00 3.90 4.20 • • • 060049-042

JIS 50.00 4.00 4.30 • 060050-043

ISO 63.00 47.50 6.00 6.30 • • 063047-063

JIS 48.00 7.20 7.50 • 063048-075

JIS 48.00 10.50 11.00 • 063048-110

Airzet 51.00 3.70 4.00 • 063051-040

ISO 52.00 3.90 4.20 • • • 063052-042

53.00 7.50 8.00 • 063053-080

55.50 2.90 3.20 • 063055-032

65.00 49.50 6.00 6.30 • 065049-063

JIS 50.00 10.50 11.00 • 065050-110

51.00 8.50 9.00 • 065051-090

02/10 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 11

Double Acting
Glide Rings
KPDP GP2 GP4 GP6

GP8 PHD GP3 (Made to order)

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød NOM L KPDP GP2/3 GP4 GP6 GP8 PHD Size Code

65.00 52.00 6.00 6.30 • 065052-063

54.00 3.90 4.20 • • • 065054-042

70.00 54.50 6.00 6.30 • • 070054-063

JIS 55.00 7.20 7.50 • 070055-075

JIS 55.00 10.50 11.00 • 070055-110

55.00 12.00 12.50 • 070055-125

57.00 6.00 6.30 • 070057-063

59.00 3.90 4.20 • • 070059-042

60.00 7.50 8.00 • 070060-080

75.00 59.50 6.00 6.30 • • 075059-063

JIS 60.00 7.20 7.50 • 075060-075

JIS 60.00 10.50 11.00 • 075060-110

63.00 8.60 9.10 • 075063-091

64.00 3.90 4.20 • • • 075064-042

80.00 59.00 7.80 8.10 • 080059-081

ISO 64.50 6.00 6.30 • • • 080064-063

JIS 65.00 7.20 7.50 • 080065-075

JIS 65.00 10.50 11.00 • 080065-110

65.00 11.50 12.00 • 080065-120

68.00 3.90 4.20 • 080068-042

ISO 69.00 3.90 4.20 • • 080069-042

69.00 4.70 5.00 • 080069-050

JIS 85.00 64.00 7.80 8.10 • 085064-081

69.50 6.00 6.30 • • 085069-063

JIS 70.00 7.20 7.50 • 085070-075

JIS 70.00 10.50 11.00 • 085070-110

JIS 90.00 69.00 7.80 8.10 • 090069-081

74.50 6.00 6.30 • • • 090074-063

JIS 75.00 7.20 7.50 • 090075-075

JIS 75.00 10.50 11.00 • 090075-110

75.00 11.50 12.00 • 090075-120

75.00 12.50 13.00 • 090075-130

79.00 3.90 4.20 • 090079-042

05/06 02/11
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 12

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød NOM L KPDP GP2/3 GP4 GP6 GP8 PHD Size Code

M/F 90.00 80.00 8.70 9.00 • 090080-090

JIS 95.00 74.00 7.80 8.10 • 095074-081

79.50 6.00 6.30 • • • 095079-063

JIS 80.00 7.20 7.50 • 095080-075

JIS 80.00 10.50 11.00 • 095080-110

M/F 85.00 3.90 4.20 • 095085-042

85.00 8.50 8.80 • 095085-088

JIS 100.00 79.00 7.80 8.10 • • 100079-081

ISO 84.50 6.00 6.30 • • • 100084-063

JIS 85.00 7.20 7.50 • 100085-075

JIS 85.00 12.00 12.50 • 100085-125

Cat 85.75 6.94 7.24 • 100085-072

86.50 6.00 6.30 • 100086-063

ISO 89.00 3.90 4.20 • 100089-042

JIS 105.00 84.00 7.80 8.10 • 105084-081

89.50 6.00 6.30 • • • 105089-063

JIS 90.00 12.00 12.50 • 105090-125

JIS 110.00 89.00 7.80 8.10 • • 110089-081

94.50 6.00 6.30 • • • 110094-063

JIS 95.00 12.00 12.50 • 110095-125

Cat 95.75 6.94 7.24 • 110095-072

98.00 3.70 4.00 • 110098-040

JIS 115.00 94.00 7.80 8.10 • 115094-081

94.00 10.20 10.50 • 115094-105

99.50 6.00 6.30 • • • 115099-063

JIS 100.00 12.00 12.50 • 115100-125

120.00 99.00 7.80 8.10 • • 120099-081

99.00 10.20 10.50 • 120099-105

100.00 15.50 16.00 • 120100-160

104.50 6.00 6.30 • • • 120104-063

JIS 105.00 12.00 12.50 • 120105-125

Cat 105.75 6.94 7.24 • 120105-072

JIS 125.00 102.00 15.50 16.00 • 125102-160

02/12 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 13

Double Acting
Glide Rings
KPDP GP2 GP4 GP6

GP8 PHD GP3 (Made to order)

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød NOM L KPDP GP2/3 GP4 GP6 GP8 PHD Size Code

ISO 125.00 104.00 7.80 8.10 • 125104-081

105.00 15.50 16.00 • 125105-160

JIS 109.00 7.20 7.50 • 125109-075

ISO 109.50 6.00 6.30 • • • 125109-063

Airzet 110.00 4.70 5.00 • 125110-050

JIS 130.00 107.00 15.50 16.00 • 130107-160

109.00 7.80 8.10 • 130109-081

JIS 114.00 7.20 7.50 • 130114-075

114.50 6.00 6.30 • • • 130114-063

Cat 115.75 6.94 7.24 • 130115-072

JIS 135.00 112.00 15.50 16.00 • 135112-160

114.00 7.80 8.10 • • 135114-081

JIS 140.00 117.00 15.50 16.00 • 140117-160

119.00 7.80 8.10 • • • 140119-081

120.00 15.50 16.00 • 140120-160

Cat 120.62 9.33 9.63 • 140120-096

JIS 124.00 7.20 7.50 • 140124-075

JIS 145.00 122.00 15.50 16.00 • 145122-160

124.00 7.80 8.10 • • 145124-081

JIS 150.00 127.00 15.50 16.00 • 150127-160

129.00 7.80 8.10 • • • 150129-081

Cat 130.62 9.33 9.63 • 150130-096

155.00 134.00 7.80 8.10 • • 155134-081

JIS 160.00 137.00 15.50 16.00 • 160137-160

ISO 139.00 7.80 8.10 • • • 160139-081

140.00 15.50 16.00 • 160140-160

Cat 140.62 9.33 9.63 • 160140-096

JIS 165.00 142.00 15.50 16.00 • 165142-160

144.00 7.80 8.10 • • 165144-081

JIS 170.00 147.00 15.50 16.00 • 170147-160

149.00 7.80 8.10 • • • 170149-081

Cat 150.62 9.33 9.63 • 170150-096

154.50 6.00 6.30 • 170154-063

05/06 02/13
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 14

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød NOM L KPDP GP2/3 GP4 GP6 GP8 PHD Size Code

JIS 180.00 157.00 15.50 16.00 • 180157-160

159.00 7.80 8.10 • • • 180159-081

160.00 15.50 16.00 • 180160-160

Cat 160.62 9.33 9.63 • 180160-096

164.50 6.00 6.30 • 180164-063

JIS 185.00 162.00 15.50 16.00 • 185162-160

164.00 7.80 8.10 • 185164-081

JIS 190.00 167.00 15.50 16.00 • 190167-160

169.00 7.80 8.10 • • 190169-081

JIS 200.00 177.00 15.50 16.00 • 200177-160

ISO 179.00 7.80 8.10 • • • 200179-081

JIS 210.00 187.00 15.50 16.00 • 210187-160

189.00 7.80 8.10 • • 210189-081

JIS 220.00 197.00 15.50 16.00 • 220197-160

199.00 7.80 8.10 • 220199-081

JIS 225.00 202.00 15.50 16.00 • 225202-160

204.00 7.80 8.10 • • 225204-081

230.00 204.72 9.20 9.63 • 230204-096

JIS 207.00 15.50 16.00 • 230207-160

209.00 7.80 8.10 • • 230209-081

214.50 6.00 6.30 • 230214-063

JIS 240.00 217.00 15.50 16.00 • 240217-160

219.00 7.80 8.10 • • 240219-081

JIS 250.00 222.00 17.00 17.50 • 250222-175

ISO 229.00 7.80 8.10 • • • 250229-081

JIS 260.00 232.00 17.00 17.50 • 260232-175

239.00 7.80 8.10 • • 260239-081

JIS 280.00 252.00 17.00 17.50 • 280252-175

259.00 7.80 8.10 • 280259-081

JIS 300.00 272.00 17.00 17.50 • 300272-175

279.00 7.80 8.10 • • 300279-081

ISO 320.00 299.00 7.80 8.10 • • 320299-081

ISO 400.00 375.50 7.80 8.10 • 400375-081

02/14 05/06
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 15

Double Acting
Glide Rings
KPDP GP2 GP4 GP6

GP8 PHD GP3 (Made to order)

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød NOM L KPDP GP2/3 GP4 GP6 GP8 PHD Size Code

ISO 500.00 475.50 7.80 8.10 • 500475-081

05/06 02/15
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 16
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 1

PR1
NR
Piston Rings

S E A L S

Design
Double acting seals

PR1 are manufactured from cast iron. These piston rings are
double acting seals. The joint, known as ‘Permaseal’, over
locks both on cross section and width simultaneously. This
prevents the end of the rings from moving radially outward
when passing open ports. Cast iron piston rings can
withstand higher and lower temperatures, are compatible
with most media and will resist wear in rougher cylinder
bores. End clearance in the ring not only compensates for

Key Features cylinder diameter tolerances and thermal expansion, it allows

for ring and cylinder wear during operation.

Heavy duty
One piece piston Operating Conditions

Very compact design Pressure, Temperature and Speed

Pressure temperature and speed have very little effect on
Gapping not required Cast Iron Rings. Thermal Expansion is allowed for in the joint.

Hole or slot passability

Surface Finish
High extrusion resistance Cylinder Wall - Satisfactory results can be obtained in bores
ranging from 4 to 80 Ra. It has been found however, that
High shock load resistance excellent ring seating takes place in cylinders with wall finishes
from 16 to 40 Ra. Piston groove finish 43 Ra Max.
High speed
ØD Tolerances
ØD Ød L C r
Ød
H10 +0.00 -0.00 3.2 0.2
-0.20 +0.10
Dia d2 can accept radial clearances 1/3 of the ring radial wall
dimension without loosing sealing effectiveness. However, the
piston bearing diameter should be fitted closely enough to the
maxium cylinder bore diameter to ensure parrallelism between
L r the side faces of the piston ring and the ring groove.

L r
Typical Examples
Reciprocating Rotary Oscillating Helix
L r

Other Similar Styles

Ød2

20º

05/06 03/1
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 2
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 3

Double Acting
L

Piston Rings
r ØD

Ød1

PR1

Bore Dia Hsg Dia Hsg Ln Ring

ØD Ød1 L Cross Section Product Code
40.00 34.70 2.00 2.00 PR1-040034-020

45.00 39.00 2.50 2.20 PR1-045039-025

50.00 44.70 2.00 2.00 PR1-050044-020

50.00 44.00 2.50 2.30 PR1-050044-025

55.00 49.00 3.00 2.30 PR1-055049-030

90.00 81.00 4.00 3.50 PR1-090081-040

95.00 85.00 4.00 4.00 PR1-095085-040

100.00 88.00 4.00 4.70 PR1-100088-040

105.00 93.00 4.00 4.40 PR1-105093-040

115.00 103.00 4.00 4.70 PR1-115103-040

120.00 107.00 4.00 5.00 PR1-120107-040

130.00 116.00 4.00 5.40 PR1-130116-040

135.00 121.00 4.00 5.40 PR1-135123-040

140.00 125.00 4.00 5.70 PR1-140125-040

160.00 143.00 4.00 6.55 PR1-160143-040

185.00 165.00 4.00 7.55 PR1-185165-040

05/06 03/3
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 4
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 1

TET
NR
Piston and Seal

S E A L S

Design
Double acting seals

TET are a complete double acting piston, comprising a

moulded Nitrile piston head with vulcanised metal support
ring. Both sealing lips are reinforced by garter springs to
ensure proper radial contact pressure. Complete piston
heads are primarily used in pneumatics with oily and non-
processed compressed air and dry oil free air. Moulded into
the outside diameter between the sealing lips is a bearing
support area. Complete piston heads are installed with the
rubber covered side of the packing base resting against the
shoulder of the rod.

Key Features
Low pressures Operating Conditions

Compact design Pressure

10 Bar
Pneumatic
Complete piston with 145 Psi

bearing support 40 Bar

Hydraulic
580 Psi
Can run dry oil free air
Temperature
-25° to 100°C
-13° to 212°F

Speed
0.5m/sec
ØD 1.5'/sec
Ød2
Ød1
Surface Finish µmRa
Ød1 Rt <2um

Tolerance
Ød1 H12
L2 L1 L3

25º

05/06 04/1
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 2
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 3

L2

Double Acting
L1

Piston & Seal

ØD

Ød2

Ød1

TET

L3

Bore Dia Hole Dia Plate Over all

ØD Ød1 L1 L2 Ød2 L3 Product Code

25.00 8.20 3.00 22.00 15.00 6.00 TET-025008-220
26.00 8.20 3.00 22.00 15.00 6.00 TET-026008-220

30.00 8.20 3.00 22.00 16.00 6.00 TET-030008-220

35.00 8.20 3.00 26.00 20.00 6.00 TET-035008-260

40.00 10.20 3.00 22.00 20.00 6.00 TET-040010-220

45.00 10.20 4.00 25.00 22.00 7.00 TET-045010-250

50.00 10.20 4.00 25.00 27.00 7.00 TET-050010-250

55.00 10.20 4.00 25.00 32.00 7.00 TET-055010-250

60.00 12.20 4.00 26.00 37.00 7.00 TET-060012-260

63.00 12.20 4.00 25.00 40.00 7.00 TET-063012-250

65.00 12.20 4.00 25.00 41.00 7.00 TET-065012-250

70.00 12.20 5.00 30.00 44.00 8.00 TET-070012-300

75.00 12.20 5.00 30.00 50.00 8.00 TET-075012-300

80.00 12.20 5.00 30.00 54.00 10.00 TET-080012-300

100.00 12.20 6.00 35.00 72.00 10.00 TET-100012-350

110.00 12.20 6.00 40.00 78.00 10.00 TET-110012-400

115.00 20.20 8.00 30.00 83.00 13.00 TET-115020-300

120.00 20.20 8.00 40.00 88.00 13.00 TET-120020-400

125.00 20.20 8.00 40.00 85.00 14.00 TET-125020-400

140.00 20.20 9.00 40.00 100.00 15.00 TET-140020-400

150.00 20.20 10.00 40.00 105.00 15.00 TET-150020-400

160.00 20.20 10.00 40.00 115.00 15.00 TET-160020-400

175.00 20.20 10.00 40.00 120.00 15.00 TET-175020-400

180.00 20.20 10.00 40.00 130.00 15.00 TET-180020-400

200.00 20.20 10.00 40.00 146.00 15.00 TET-200020-400

250.00 30.20 12.00 40.00 200.00 17.00 TET-250030-400

300.00 35.20 12.00 40.00 250.00 17.00 TET-300035-400

05/06 04/3
NRS294-NR Seals Metric 01 8/30/05 2:17 PM Page 4
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 1

RSE
NR
Piston Seals

S E A L S

Design
Single acting seals

RSE u-cup seals are a specialised piston seal design

manufactured from Polyurethane 94 Shore A. Having an inside
diameter smaller than the groove for which it is intended,
insures a tight fit in the groove to prevent movement during
operation. It also provides sufficient preload to prevent
interference with the cylinder wall due to thermal expansion of
the seal at higher operating temperatures. The static lip is
thinner as it’s in full contact with the groove diameter the
dynamic lip is heavier to improve higher pressure capability.
Both lips have precision knife trimmed chamfers to provide
complete circumferential lip contact.
Key Features
Medium to heavy duty Operating Conditions

Piston only Pressure

400 Bar
Asymmetrical lip design 6,000 Psi

Temperature
Excellent wear resistance
-40° to 105°C
-40° to 221°F
Good extrusion resistance
Speed
Flexible to fit 0.8m /sec
2.5'/sec

Surface Finish µmRa

ØD
ØD Ød L
20˚ to 30˚

0.1 - 0.25 ≤0.8 2.0

Ød

C/S Tolerances
C ØD Ød L
H10 f7 - 0 +0.25

Chamfer Radii
L r
C/S 4.0 5.0 7.5 10.0
G/2 C 3.0 3.5 5.0 6.5
r 0.2 0.4 0.8 0.8

G/2 Extrusion Gap - G

Pressure (Bar) 50 100 200 300 400 500
L r Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 05/1
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 2

RSEA
NR
Piston Seals

S E A L S

Design
Single acting seals

RSEA u-cup are a specialised piston seal design

manufactured from Polyurethane 94 Shore A, with an anti-
extrusion ring made from Polyacetal resin on the outside heal
of the seal. Having an inside diameter smaller than the
groove for which it is intended, insures a tight fit in the
groove to prevent movement during operation. It also
provides sufficient preload to prevent interference with the
cylinder wall due to thermal expansion of the seal at higher
operating temperatures. The static lip is thinner as it’s in full
contact with the groove diameter, the dynamic lip is heavier,
improving high pressure sealing. Both lips have precision
Key Features knife trimmed chamfers to provide complete circumferential
lip contact.

Medium to heavy duty Operating Conditions

Piston only Pressure

400 Bar
Asymmetrical lip design 6,000 Psi

Temperature
Excellent wear resistance
-40° to 105°C
-40° to 221°F
Excellent extrusion
Speed
resistance
0.8m /sec
Flexible to fit 2.5'/sec

Surface Finish µmRa

ØD
ØD Ød L
20˚ to 30˚

0.1 - 0.25 ≤0.8 2.0

Ød

C/S Tolerances
C ØD Ød L
H10 f7 -0.00 +0.25

Chamfer Radii
L r
c/s 4.0 5.0 7.5 10.0
G/2 C 3.0 3.5 5.0 6.5
r 0.2 0.4 0.8 0.8

G/2 Extrusion Gap - G

Pressure (Bar) 50 100 200 300 400 500
L r
Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

05/2 05/06
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 3

RSS
NR
Piston Seals

S E A L S

Design
Single acting seals

RSS are a symmetrical U-cup made from 94 Shore A

Polyurethane with a high modulus of elasticity and low
permanent deformation. Its excellent wear resistance offers
long service life in a wide range of applications. The
symmetrical configuration, with equal lip interference and
equal heal clearance on both the inside and outside
diameters, provides a seal which is capable for use in both
piston and rod applications. The sealing lips are knife
trimmed to eliminate all moulding flash and to provide
superior low pressure sealing performance.

Key Features
Medium to heavy duty Operating Conditions

Piston or rod Pressure

400 Bar
Symmetrical lip design 6,000 Psi

Temperature
Excellent wear resistance
-40° to 105°C
-40° to 221°F
Good extrusion resistance
Speed
Flexible to fit 0.8m /sec
2.5'/sec

Surface Finish µmRa

ØD
ØD Ød L
20˚ to 30˚

0.1 - 0.25 ≤0.8 2.0

Ød

C/S Tolerances
C ØD Ød L
H10 f7 -0.00 +0.25

Chamfer Radii
L r
c/s 4.0 5.0 7.5 10.0
G/2 C 3.0 3.5 5.0 6.5
r 0.2 0.4 0.8 0.8

G/2 Extrusion Gap - G

Pressure (Bar) 50 100 200 300 400 500
L r
Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 05/3
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 4

MAD
NR
Piston Seals

S E A L S

Design
Single acting seals

MAD are a symmetrical U-cup made from 95 Shore A

Polyurethane with a high modulus of elasticity and low
permanent deformation. Its excellent wear resistance offers
long service life in a wide range of applications. The
symmetrical configuration, with equal lip interference and
equal heal clearance on both the inside and outside
diameters, provides a seal which is capable for use in both
piston and rod applications. The sealing lips are knife
trimmed to eliminate all moulding flash and to provide
superior low pressure sealing performance.

Key Features
Medium to heavy duty Operating Conditions

Piston or rod Pressure

400 Bar
Symmetrical lip design 6,000 Psi

Temperature
Excellent wear resistance
-30° to 100°C
-22° to 212°F
Good extrusion resistance
Speed
Flexible to fit 0.8m /sec
2.5'/sec

Surface Finish µmRa

ØD
20˚ to 30˚

ØD Ød L
Ød 0.1 - 0.25 ≤0.8 2.0

C/S

C
Tolerances
ØD Ød L
H9 js11 -0.00 +0.20
L r Chamfer Radii
G/2 c/s 5.0 7.5 10.0 15.0 20 .0
C 2.5 4.0 5.0 7.5 10 .0
r 0.4 0.8 0.8 1.6 1.6
G/2
Extrusion Gap - G
L r
Pressure (Bar) 50 100 200 300 400 500
Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

05/4 05/06
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 5

CPE
NR
Piston Seals

S E A L S

Design
Single acting seals

CPE are for use as single acting piston seals. This seal is a
precision moulded Nitrile rubber sealing element with a fabric
reinforced base to resist extrusion. This design incorporates an
Polyacetal anti-extrusion ring to the outside diameter heal of
the seal to protect from rapid pressure changes. Manufactured
with initial radial interference to effect low pressure sealing, as
pressure increases the seal is energised thus increasing the
sealing force. Rubberised fabric has the advantage of retaining
the sealing media within its surfaces reducing friction and wear.
The radial grooves incorporated into the face of the seal on the
pressure side, ensure rapid energisation of the seal without
Key Features excessive end float and resultant wear.

Medium to heavy duty Operating Conditions

Piston only Pressure

400 Bar
Tolerant of surface 6,000 Psi

imperfections Temperature
-30° to 100°C
Good service life -22° to 212°F

Speed
Excellent extrusion
0.5m /sec
resistance 1.5'/sec

Surface Finish µmRa

ØD
ØD Ød L
20˚ to 30˚

0.1 - 0.25 ≤0.8 2.0

Ød
C/S

Tolerances
C ØD Ød L
H10 js11 -0 +0.25

Chamfer Radii
L r
c/s 6.0 7.5 10.0
G/2 C 3.0 4.0 5.0
r 0.4 0.4 0.4

Extrusion Gap - G
Pressure (Bar) 100 200 300 400
Seal Only (mm) 0.80 0.60 0.50 0.40
Seal + BU (mm) 1.10 0.80 0.70 0.60

Typical Examples
Reciprocating Rotary Oscillating Helix

Similar Styles

05/06 05/5
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 6

CP
NR
Piston Seals

S E A L S

Design
Single acting seals

CP are designed with a symmetrical profile for use as a

single acting piston or rod seal. The seal is a precision
moulded Nitrile rubber sealing element with a bonded fabric
reinforced base to resist extrusion. Manufactured with initial
radial interference to effect low pressure sealing, as pressure
increases the seal is energised thus increasing the sealing
force. Rubberised fabric has the advantage of retaining the
sealing media within its surfaces reducing friction and wear.
The radial grooves incorporated into the face of the seal on
the pressure side, ensure rapid energisation of the seal
without excessive end float and resultant wear.
Key Features
Medium to heavy duty Operating Conditions

Piston or rod Pressure

400 Bar
Tolerant of surface 6,000 Psi

imperfections Temperature
-30° to 100°C
Good service life -22° to 212°F

Speed
Good extrusion resistance
0.5m /sec
1.5'/sec

Surface Finish µmRa

ØD
ØD Ød L
20˚ to 30˚

0.1 - 0.25 ≤0.8 2.0

Ød
C/S

Tolerances
C ØD Ød L
H10 js11 -0 +0.25
Chamfer Radii
L r
c/s 4.0 5.0 7.5 10.0
C 2.0 2.5 4.0 5.0
G/2
r 0.2 0.4 0.8 0.8

Extrusion Gap - G
Pressure (Bar) 100 200 300 400
Seal Only (mm) 0.40 0.30 0.18 0.10
Seal + BU (mm) 1.10 0.80 0.70 0.60

Typical Examples
Reciprocating Rotary Oscillating Helix

Similar Styles

05/6 05/06
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 7

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

9.00 3.00 4.50 5.00 • 035011 003009-050

4.00 4.00 4.50 • 035015 004009-045

10.00 4.00 4.00 4.50 • 039015 004010-045

4.00 4.50 5.00 • 039015 004010-050

11.00 4.50 5.00 5.50 • 043017 004011-055

12.00 5.00 5.00 5.50 • 047019 005012-055

5.00 5.50 6.00 • 047019 005012-060

5.00 6.00 6.50 • 047019 005012-065

5.00 6.20 7.00 • 047019 005012-070

6.00 4.00 4.50 • 047023 006012-045

6.00 4.50 5.00 • 047023 006012-050

6.00 5.50 6.00 • 047023 006012-060

6.00 6.00 6.50 • 047023 006012-065

8.00 2.40 3.50 • 047031 008012-035

12.50 4.50 4.50 5.00 • 049017 004012-050

12.70 5.00 8.00 9.00 • 050019 005012-090

6.00 5.50 6.50 • 050023 006127-065

14.00 6.00 4.00 4.50 • 055024 006014-045

7.00 3.50 4.20 • 055027 007014-042

8.00 6.30 6.80 • 055031 008014-068

8.00 6.00 7.00 • 055031 008014-070

15.00 6.00 8.00 9.00 • 059024 006015-090

7.00 4.00 4.50 • 059027 007015-045

7.00 7.00 8.00 • 059027 007015-080

8.00 5.80 6.30 • 059031 008015-063

8.00 8.00 9.00 • 059031 008015-090

9.00 8.00 9.00 • 059035 009015-090

16.00 6.00 5.00 5.50 • 063024 006016-055

ISO 8.00 5.80 6.30 • 063031 008016-063

10.00 5.70 6.30 • 094039 010016-063

10.00 6.00 6.50 • • 063039 010016-065

10.00 8.00 9.00 • 063039 010016-090

JIS 16.30 6.30 8.00 9.00 • UN 6.3 006016-090

05/06 05/7
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 8

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

17.00 5.00 9.00 10.00 • 066019 005017-100

10.00 5.80 6.40 • 066039 010017-064

11.00 4.40 5.00 • 066043 011017-050

JIS 17.10 7.10 8.00 9.00 • UN 7.1 007017-090

18.00 8.00 5.00 5.50 • 070031 008018-055

JIS 8.00 8.00 9.00 • UN 8 008018-090

8.00 9.00 10.00 • 070031 008018-100

10.00 5.50 6.00 • 070039 010018-060

10.00 6.00 7.00 • 070039 010018-070

10.00 8.00 9.00 • 070039 010018-090

12.00 4.80 5.50 • 070047 012018-055

12.00 6.00 7.00 • 070047 012018-070

19.00 9.00 6.00 7.00 • 075035 009019-070

JIS 9.00 8.00 9.00 • UN 9 009019-090

JIS 19.20 11.20 5.00 6.00 • UHS 11.2 011019-060

20.00 8.00 6.00 7.00 • 078031 008020-070

10.00 8.00 9.00 • 078039 010020-090

12.00 6.00 6.50 • 078047 012020-065

12.00 6.50 7.50 • 078047 012020-075

12.00 7.00 8.00 • 078047 012020-080

12.00 8.00 9.00 • 078047 012020-090

14.00 4.00 4.50 • 078055 014020-045

14.00 4.80 5.30 • 078055 014020-053

14.00 5.50 6.00 • 078055 014020-060

20.50 11.00 6.00 7.00 • 080043 011020-070

JIS 21.20 11.20 8.00 9.00 • UN 11.2 011021-090

22.00 8.00 8.00 9.00 • 086031 008022-090

10.00 6.00 7.00 • 086039 010022-070

10.00 8.00 9.00 • 086039 010022-090

12.00 5.00 6.00 • 086047 012022-060

12.00 7.00 8.00 • 086047 012022-080

12.00 8.00 9.00 • • 086047 012022-090

14.00 3.90 4.50 • 086055 014022-045

05/8 05/06
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 9

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

JIS 22.00 14.00 5.00 5.70 • UHS 14 014022-057

14.00 6.00 7.00 • 086055 014022-070

14.00 8.00 9.00 • 086055 014022-090

14.00 11.00 12.00 • 086055 014022-120

16.00 4.00 4.50 • 086063 016022-045

16.00 5.00 5.50 • 086063 016022-055

JIS 22.50 12.50 8.00 9.00 • UN 12.5 012022-090A

23.00 15.00 5.80 6.30 • 090059 015023-063

24.00 12.00 8.00 9.00 • 094047 012024-090

12.00 9.00 10.00 • 094047 012024-100

12.50 5.00 6.00 • 094049 012024-060

14.00 8.00 9.00 • 094055 014024-090

JIS 16.00 5.00 5.70 • UHS 16 016024-057

ISO 16.00 5.80 6.30 • 094063 016024-063

16.00 6.50 7.00 • 094063 016024-070

16.00 9.00 10.00 • 094063 016024-100

25.00 10.00 10.00 11.00 • 098039 010025-110

12.00 8.00 9.00 • 098047 012025-090

12.00 10.00 11.00 • 098047 012025-110

13.00 7.00 8.00 • 098051 013025-080

14.00 5.50 6.50 • 098055 014025-065

15.00 8.00 9.00 • • 098059 015025-090

15.00 10.00 11.00 • 098059 015025-110

17.00 4.00 4.50 • 098066 017025-045

17.00 10.00 11.00 • 098066 017025-110

18.00 5.00 5.50 • 098070 018025-055

18.00 6.50 7.00 • 098070 018025-070

19.00 6.00 7.00 • 098075 019025-070

26.00 16.00 5.00 6.00 • 102063 016026-060

JIS 16.00 8.00 9.00 • UN 16 016026-090

16.00 10.00 11.00 • 102063 016026-110

16.75 5.80 6.30 • 102066 016026-063

JIS 18.00 5.00 5.70 • UHS 18 018026-057

05/06 05/9
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 10

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

ISO 26.00 18.00 5.80 6.30 • 102070 018026-063

18.00 6.50 7.50 • 102070 018026-075

18.00 8.00 9.00 • 102070 018026-090

18.00 8.50 9.50 • 102070 018026-095

15.00 6.00 7.00 • 106059 015027-070

20.00 6.00 6.50 • 106078 020027-065

28.00 15.00 10.00 11.00 • 110059 015028-110

16.00 6.00 7.00 • 110063 016028-070

18.00 5.80 6.30 • 110070 018028-063

JIS 18.00 8.00 9.00 • UN 18 018028-090

20.00 4.00 5.00 • 110078 020028-050

JIS 20.00 5.00 5.70 • UHS 20 020028-057

ISO 20.00 5.80 6.30 • 110078 020028-063

20.00 6.50 7.00 • • 110078 020028-070

20.00 8.00 9.00 • 110078 020028-090

22.00 8.00 9.00 • 110086 022028-090

29.00 19.00 6.00 6.50 • 114074 019029-065

20.00 5.00 5.50 • 114078 020029-055

30.00 14.00 5.00 6.00 • 118055 014030-060

15.00 10.00 11.00 • 118059 015030-110

18.00 8.00 9.00 • 118070 018030-090

ISO 20.00 7.50 8.00 • 118078 020030-080

JIS 20.00 8.00 9.00 • • UN 20 020030-090

20.00 10.00 11.00 • 118078 020030-110

22.00 6.00 7.00 • 118086 022030-070

22.00 6.50 7.50 • 118086 022030-075

22.00 10.00 11.00 • 118086 022030-110

JIS 22.40 5.00 5.70 • UHS 22.4 022030-057

23.00 6.50 7.50 • 118090 023030-075

JIS 31.50 23.50 5.00 6.00 • UHS 23.5 023031-060

32.00 16.00 8.00 9.00 • 125063 016032-090

20.00 7.50 8.50 • 125078 020032-085

22.00 5.00 5.50 • 125086 022032-055

05/10 05/06
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 11

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

32.00 22.00 8.00 9.00 • • 125086 022032-090

22.00 10.00 11.00 • • 125086 022032-110

24.00 6.00 6.50 • 125094 024032-065

24.00 7.00 7.50 • 125094 024032-075

24.00 7.00 8.00 • 125094 024032-080

26.00 5.00 6.00 • 125102 026032-060

JIS 32.40 22.40 8.00 9.00 • UN 22.4 022032-090A

33.00 25.00 2.00 2.00 • 025033-020

25.00 4.00 4.50 • 129098 025033-045

JIS 25.00 5.00 5.70 • UHS 25 025033-057

ISO 25.00 5.80 6.30 • 129098 025033-063

25.00 6.50 7.50 • 129098 025033-075

34.00 18.00 8.00 9.00 • 133070 018034-090

22.00 8.40 9.40 • 133086 022034-094

22.00 9.00 10.00 • 133086 022034-100

35.00 20.00 10.00 11.00 • 137078 020035-110

20.00 12.00 13.00 • 137078 020035-130

22.30 6.00 7.00 • 137086 022035-070

JIS 22.00 10.00 11.00 • 137086 022035-110

23.00 9.00 10.00 • 137090 023035-100

25.00 2.00 2.00 • 025035-020

25.00 5.00 5.50 • 137098 025035-055

ISO 25.00 7.50 8.00 • 137098 025035-080

JIS 25.00 8.00 9.00 • • • UN 25 025035-090

25.00 10.00 11.00 • 137098 025035-110

27.00 6.00 6.50 • 137106 027035-065

27.00 10.00 11.00 • 137106 027035-110

28.00 5.00 5.50 • 137110 028035-055

35.50 28.00 3.00 3.00 • 028035-030

JIS 28.00 5.00 5.70 • UHS 28 028035-057

36.00 22.00 8.00 9.00 • 141086 022036-090

28.00 5.80 6.40 • 141110 028036-064

28.00 6.50 7.50 • 141110 028036-075

05/06 05/11
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 12

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

36.50 24.00 6.20 7.00 • 143094 024036-070

37.00 20.00 12.00 13.00 • 145078 020037-130

21.00 12.00 13.00 • 145082 021037-130

25.00 9.00 10.00 • 145098 025037-100

30.00 6.00 7.00 • 145118 030037-070

37.50 30.00 6.00 6.50 • 147118 030037-065

38.00 25.00 10.00 11.00 • 149098 025038-110

28.00 8.00 9.00 • 149110 028038-090

30.00 4.00 4.50 • 149118 030038-045

30.00 5.80 6.40 • 149118 030038-064

30.00 6.00 6.50 • 149118 030038-065

30.00 7.00 8.00 • 149118 030038-080

30.00 8.00 8.50 • 149118 030038-085

31.00 4.70 5.20 • 149122 031038-052

39.00 20.00 10.00 11.00 • 153078 020039-110

40.00 20.00 10.00 11.00 • 157078 020040-110

20.00 11.00 12.00 • 157078 020040-120

20.00 12.00 13.00 • 157078 020040-130

22.00 10.00 11.00 • 157086 022040-110

24.00 8.00 9.00 • 157094 024040-090

25.00 9.00 10.00 • 157098 025040-100

25.00 10.00 11.00 • • 157098 025040-110

26.00 9.50 10.00 • • 157102 026040-100

28.00 6.00 6.50 • 157110 028040-065

28.00 10.00 11.00 • 157110 028040-110

30.00 3.00 3.00 • 030040-030

30.00 40.00 1.70 • 030040-017

30.00 5.00 5.50 • 157118 030040-055

JIS 30.00 6.00 7.00 • • UHS 30 030040-070

30.00 7.00 7.50 • • 157118 030040-075

30.00 10.00 11.00 • • 157118 030040-110

32.00 5.50 6.00 • 157125 032040-060

32.00 5.80 6.40 • 157125 032040-064

05/12 05/06
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 13

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

40.00 32.00 8.00 9.00 • • 157125 032040-090

33.00 8.00 9.00 • 157129 033040-090

JIS 41.50 31.50 6.00 7.00 • UHS 31.5 031041-070

42.00 30.00 9.00 10.00 • 165118 030042-100

30.00 10.00 11.00 • 165118 030042-110

32.00 5.80 6.30 • 165125 032042-070

ISO 32.00 7.00 8.00 • 165125 032042-080

32.00 10.00 11.00 • • 165125 032042-110

34.50 4.20 4.70 • 165135 034042-047

43.00 25.00 9.00 10.00 • 169098 025043-100

28.00 9.00 10.00 • 169110 028043-100

JIS 28.00 10.00 11.00 • UN 28 028043-110

30.00 8.00 9.00 • 169118 030043-090

44.00 20.00 11.00 12.00 • 173078 020044-120

32.00 6.00 6.50 • 173125 032044-065

45.00 25.00 10.00 11.00 • 177098 025045-110

JIS 27.00 12.10 12.50 • KYB 45 027045-125

28.50 12.00 13.00 • 177112 028045-130

30.00 8.50 9.00 • 177118 030045-090

30.00 9.00 10.00 • • 177118 030045-100

JIS 30.00 10.00 11.00 • • UN 30 030045-110

32.00 10.00 11.00 • 177125 032045-110

34.00 7.00 8.00 • 177133 034045-080

34.00 9.00 10.00 • 177133 034045-100

35.00 3.00 3.00 • 035045-030

35.00 5.00 5.50 • 177137 035045-055

JIS 35.00 6.00 7.00 • • UHS 35 035045-070

35.00 8.00 9.00 • 177137 035045-090

35.00 10.00 11.00 • 177137 035045-110

JIS 35.50 6.00 7.00 • UHS 355 035045-070A

38.00 5.00 5.50 • 177149 038045-055

36.00 5.00 5.50 • 181141 036046-055

ISO 36.00 7.00 8.00 • 181141 036046-080

05/06 05/13
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 14

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

46.00 38.00 6.50 7.50 • 181149 038046-075

JIS 46.50 31.50 10.00 11.00 • UN 31.5 031046-110

48.00 32.00 10.00 11.00 • 188125 032048-110

35.00 10.00 11.00 • 188137 035048-110

36.00 8.00 9.00 • 188141 036048-090

38.00 5.00 5.50 • 188149 038048-055

JIS 38.00 6.00 7.00 • UHS 38 038048-070

38.00 7.00 8.00 • 188149 038048-080

40.00 11.00 12.00 • 188157 040048-120

50.00 30.00 10.00 11.00 • 196118 030050-110

30.00 12.00 13.00 • • 196118 030050-130

30.00 14.00 14.50 • 196118 030050-145

32.00 10.00 11.00 • • 196125 032050-110

JIS 32.00 12.10 12.50 • KYB 50 032050-125

32.00 12.00 13.00 • 196125 032050-130

JIS 34.00 12.00 13.00 • 196133 034050-130

34.00 14.00 15.00 • 196133 034050-150

35.00 8.50 9.50 • 196137 035050-095

35.00 9.00 10.00 • 196137 035050-100

35.00 10.00 11.00 • • • • 196137 035050-110

38.00 6.00 6.50 • 196149 038050-065

38.00 9.00 10.00 • 196149 038050-100

39.00 7.80 8.60 • 196153 039050-086

40.00 3.00 3.00 • 040050-030

40.00 5.00 5.50 • 196157 040050-055

JIS 40.00 6.00 7.00 • • UHS 40 040050-070

40.00 6.50 7.50 • 196157 040050-075

ISO 40.00 7.20 8.00 • 196157 040050-080

40.00 8.00 9.00 • 196157 040050-090

40.00 10.00 11.00 • • 196157 040050-110

42.00 5.50 6.00 • 196165 042050-060

42.00 6.00 6.30 • 196165 042050-063

42.00 5.50 6.50 • 196165 042050-065

05/14 05/06
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 15

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

50.00 42.00 8.00 9.00 • • 196165 042050-090

42.00 10.00 11.00 • 196165 042050-110

JIS 50.50 35.50 10.00 11.00 • UN 35.5 035050-110A

52.00 40.00 8.00 9.00 • 204157 040052-090

40.00 9.00 10.00 • 204157 040052-100

42.00 6.00 7.00 • 204165 042052-070

42.00 9.00 10.00 • 204165 042052-100

42.00 10.00 10.60 • 204165 042052-106

53.00 43.00 7.00 8.00 • 208169 043053-080

45.00 6.50 7.50 • 208177 045053-075

54.00 44.00 5.00 5.50 • 212173 044054-055

55.00 35.00 10.00 11.00 • 216137 035055-110

35.00 12.00 13.00 • 216137 035055-130

JIS 37.00 12.10 12.50 • KYB 55 037055-125

38.00 10.00 11.00 • 216149 038055-110

40.00 3.00 3.00 • 040055-030

JIS 40.00 10.00 11.00 • • UN 40 040055-110

45.00 3.00 3.00 • 045055-030

JIS 45.00 6.00 7.00 • • UHS 45A 045055-070

45.00 6.50 7.50 • 216177 045055-075

ISO 45.00 7.50 8.00 • 216177 045055-080

45.00 10.00 11.00 • 216177 045055-110

47.00 5.70 6.30 • 216185 047055-063

56.00 40.00 10.00 11.00 • 220157 040056-110

45.00 2.50 2.50 • 045056-025

JIS 45.00 7.00 8.00 • UHS 45 045056-080

57.00 45.00 6.00 6.50 • 224177 045057-065

45.00 9.00 10.00 • 224177 045057-100

58.00 38.00 10.00 11.00 • 228149 038058-110

48.00 10.00 11.00 • 228188 048058-110

50.00 5.00 5.50 • 228196 050058-055

50.00 8.00 8.50 • 228196 050058-085

60.00 40.00 10.00 11.00 • 236157 040060-110

05/06 05/15
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 16

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

60.00 40.00 12.00 13.00 • 236157 040060-130

40.00 13.00 14.00 • 236157 040060-140

40.00 14.00 14.50 • • • 236157 040060-145

40.00 18.00 19.00 • 236157 040060-190

JIS 42.00 12.10 12.50 • KYB 60 042060-125

44.00 11.60 12.50 • 236173 044060-125

44.00 12.00 13.00 • 236173 044060-130

45.00 3.00 3.00 • 045060-030

45.00 9.00 10.00 • 236177 045060-100

JIS 45.00 10.00 11.00 • • UN 45 045060-110

45.00 11.00 11.50 • 236177 045060-115

48.00 9.00 10.00 • 236188 048060-100

50.00 3.00 3.00 • 050060-030

50.00 5.00 5.50 • • 236196 050060-055

JIS 50.00 6.00 7.00 • • UHS 50 050060-070

ISO 50.00 7.00 8.00 • • 236196 050060-080

50.00 10.00 11.00 • • 236196 050060-110

50.00 11.00 12.00 • 236196 050060-120

52.00 8.00 9.00 • 236204 052060-090

62.00 40.00 15.00 16.00 • 244157 040062-160

42.00 12.00 13.00 • 244165 042062-130

50.00 9.00 10.00 • 244196 050062-100

52.00 12.00 13.00 • 244204 052062-130

63.00 43.00 12.00 13.00 • 248169 043063-130

45.00 10.00 11.00 • • 248177 045063-110

48.00 3.00 3.00 • 048063-030

48.00 9.50 10.00 (GPE) • 248188 048063-100

JIS 48.00 10.00 11.00 • • UN 48 048063-110

48.00 12.00 13.00 • 248188 048063-130

50.00 6.00 7.00 • 248196 050063-070

53.00 5.00 5.50 • 248208 053063-055

JIS 53.00 6.00 7.00 • • UHS 53 053063-070

53.00 6.50 7.50 • 248208 053063-075

05/16 05/06
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 17

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

63.00 53.00 7.00 8.00 • 248208 053063-080

53.00 12.00 13.00 • 248208 053063-130

65.00 40.00 12.00 13.00 • 255157 040065-130

45.00 10.00 11.00 • 255177 045065-110

45.00 12.00 13.00 • • 255177 045065-130

45.00 14.00 14.50 • • 255177 045065-145

JIS 47.00 12.10 12.50 • KYB 65 047065-125

50.00 3.00 3.00 • 050065-030

50.00 9.00 10.00 • 255196 050065-100

50.00 10.00 11.00 • • • UN 50 050065-110

50.00 11.00 12.00 • 255196 050065-120

50.00 11.50 12.50 • 255196 050065-125

55.00 3.00 3.00 • 055065-030

JIS 55.00 6.00 7.00 • • UHS 55 055065-070

55.00 7.50 8.00 • 255216 055065-080

55.00 10.00 11.00 • • • 255216 055065-110

55.00 12.00 13.00 • 255216 055065-130

55.00 13.50 14.50 • 255216 055065-145

JIS 66.00 56.00 6.00 7.00 • UHS 56 056066-070

68.00 48.00 10.00 11.00 • 267188 048068-110

JIS 58.00 6.00 7.00 • UHS 58 058068-070

69.00 61.00 8.00 8.50 • 271240 061069-085

70.00 36.00 10.00 11.00 • 275141 036070-110

40.00 15.00 16.00 • 275157 040070-160

40.00 24.00 26.00 • 275157 040070-260

JIS 48.00 14.50 15.00 • KYB 70 048070-150

50.00 3.00 3.00 • 050070-030

50.00 10.00 11.00 • 275196 050070-110

JIS 50.00 12.00 13.00 • • 275196 050070-130

50.00 13.50 14.50 • 275196 050070-145

50.00 15.00 16.00 • 275196 050070-160

50.00 18.00 19.00 • 275196 050070-190

54.00 12.00 13.00 • 275212 054070-130

05/06 05/17
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 18

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

70.00 55.00 3.00 3.00 • 055070-030

55.00 8.50 9.50 • 275216 055070-095

55.00 9.50 10.50 • 275216 055070-105

55.00 10.00 11.00 • 275216 055070-110

55.00 12.00 13.00 • • • Full Radial AE Ring 275216 055070-130

60.00 3.00 3.00 • 060070-030

60.00 5.00 5.50 • 275236 060070-055

JIS 60.00 6.00 7.00 • • UHS 60A 060070-070

60.00 7.40 8.00 • • 275236 060070-080

60.00 8.00 9.00 • 275236 060070-090

60.00 10.00 11.00 • 275236 060070-110

60.00 12.00 13.00 • • 275236 060070-130

60.00 13.50 14.50 • 275236 060070-145

62.00 7.50 8.50 • 275244 062070-085

JIS 71.00 60.00 7.00 8.00 • UHS 60 060071-080

JIS 61.00 6.00 7.00 • UHS 61 061071-070

72.00 50.00 12.00 13.00 • 283196 050072-130

58.00 12.00 13.00 • 283228 058072-130

JIS 73.00 53.00 12.00 13.00 • UN 53 053073-130

60.00 3.00 3.00 • 060073-030

JIS 63.00 6.00 7.00 • UHS 63 063073-070

63.00 7.00 8.00 • 287248 063073-080

74.00 34.00 10.00 11.00 • 291133 034074-110

75.00 40.00 10.00 11.00 • 295157 040075-110

50.00 14.00 15.00 • 295196 050075-150

55.00 3.00 3.00 • 055075-030

55.00 10.00 11.00 • 295216 055075-110

JIS 55.00 12.00 13.00 • UN 55 055075-130

55.00 13.50 14.50 • 295216 055075-145

60.00 3.00 3.00 • 060075-030

60.00 10.00 11.00 • 295236 060075-110

60.00 12.50 13.00 • • 295236 060075-130

63.00 9.00 9.60 • 295248 063075-096

05/18 05/06
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 19

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

75.00 63.00 10.00 11.00 • 295248 063075-110

65.00 3.00 3.00 • 065075-030

65.00 5.00 5.50 • 295255 065075-055

JIS 65.00 6.00 7.00 • • UHS 65 065075-070

65.00 6.70 7.50 • 295255 065075-075

65.00 7.00 8.00 • 295255 065075-080

65.00 10.00 11.00 • 295255 065075-110

65.00 12.00 13.00 • 295255 065075-130

65.00 13.50 14.50 • 295255 065075-145

JIS 76.00 60.00 12.00 13.00 • 299236 060076-130

66.00 8.00 9.00 • 299259 066076-090

70.00 5.50 6.00 • 299275 070076-060

77.00 65.00 9.00 9.60 • 303255 065077-096

JIS 67.00 6.00 7.00 • UHS 67 067077-070

67.00 10.00 11.00 • 303263 067077-110

67.00 12.00 13.00 • 303263 067077-130

78.00 58.00 15.00 16.00 • 307228 058078-160

63.00 10.00 11.00 • 307248 063078-110

65.00 3.00 3.00 • 065078-030

80.00 55.00 12.00 13.00 • 314216 055080-130

JIS 58.00 14.50 15.00 • KYB 80 058080-150

60.00 3.00 3.00 • 060080-030

60.00 10.00 11.00 • 314236 060080-110

JIS 60.00 12.00 13.00 • • • UN 60 060080-130

60.00 14.00 14.50 • • 314236 060080-145

60.00 18.00 19.00 • 314236 060080-190

64.00 12.00 13.00 • 314251 064080-130

65.00 3.00 3.00 • 065080-030

65.00 10.00 11.00 • 314255 065080-110

65.00 11.00 12.00 • 314255 065080-120

65.00 12.00 13.00 • • 314255 065080-130

66.00 10.00 11.00 • 314259 066080-110

66.00 13.00 14.00 • 314259 066080-140

05/06 05/19
NRS294-NR Seals Metric 05 8/30/05 2:18 PM Page 20

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

80.00 68.00 9.00 10.00 • 314267 068080-100

70.00 3.00 3.00 • 070080-030

70.00 5.00 6.00 • 314275 070080-060

JIS 70.00 6.00 7.00 • • UHS 70 070080-070

70.00 7.00 8.00 • • 314275 070080-080

70.00 8.00 9.00 • 314275 070080-090

70.00 10.00 11.00 • 314275 070080-110

70.00 12.00 13.00 • • 314275 070080-130

JIS 71.00 6.00 7.00 • UHS 71 071080-070

72.00 12.00 13.00 • 314283 072080-130

82.00 66.00 12.00 13.00 • 322259 066082-130

70.00 9.00 9.60 • 322275 070082-096

ISO 83.00 63.00 15.00 16.00 • 326248 063083-160

84.00 70.00 12.00 12.50 • 330275 070084-125

85.00 60.00 12.50 13.50 • 334236 060085-135

JIS 63.00 14.50 15.00 • KYB 85 063085-150

65.00 3.00 3.00 • 065085-030

65.00 10.00 11.00 • 334255 065085-110

JIS 65.00 12.00 13.00 • UN 65 065085-130

65.00 14.00 14.50 • • 334255 065085-145

70.00 3.00 3.00 • 070085-030

70.00 8.50 9.50 • 335275 070085-095

70.00 10.00 11.00 • 334275 070085-110

70.00 11.00 12.00 • 334275 070085-120

70.00 12.00 13.00 • 334275 070085-130

75.00 3.00 3.00 • 075085-030

JIS 75.00 6.00 7.00 • • UHS 75 075085-070

75.00 10.00 11.00 • 334295 075085-110

75.00 12.00 13.00 • • 334295 075085-130

JIS 87.00 67.00 12.00 13.00 • UN 67 067087-130

88.00 75.00 3.00 3.00 • 075088-030

90.00 60.00 15.00 16.00 • 354236 060090-160

65.00 19.00 20.00 • 354255 065090-200

05/20 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 21

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

JIS 90.00 68.00 14.50 15.00 • KYBU90 068090-150

70.00 3.00 3.00 • 070090-030

70.00 10.00 11.00 • 354275 070090-110

JIS 70.00 12.00 13.00 • • • UN 70 070090-130

70.00 14.00 14.50 • • 354275 070090-145

70.00 18.00 19.00 • 354275 070090-190

75.00 3.00 3.00 • 075090-030

75.00 7.00 8.00 • 354295 075090-080

75.00 7.50 8.50 • 354295 075090-085

75.00 10.00 11.00 • • 354295 075090-110

75.00 12.00 13.00 • • 354295 075090-130

78.00 9.00 10.00 • 354307 078090-100

MF 80.00 2.40 2.40 • 080090-024

80.00 3.00 3.00 • 080090-030

80.00 4.50 5.00 • • 354314 080090-050

JIS 80.00 6.00 7.00 • • UHS 80 080090-070

80.00 7.50 8.00 • 354314 080090-080

80.00 10.00 11.00 • • 354314 080090-110

80.00 12.00 13.00 • 354314 080090-130

80.00 13.00 14.00 • 354314 080090-140

JIS 91.00 71.00 12.00 13.00 • UN 71 071091-130

92.00 76.00 12.00 13.00 • 362300 076092-130

82.00 10.00 11.00 • 362322 082092-110

84.00 5.50 6.00 • 362330 084092-060

93.00 78.00 10.50 11.50 • 366307 078093-115

94.00 84.50 8.00 8.80 • 370332 084094-088

95.00 70.00 12.00 13.00 • 374275 070095-130

75.00 3.00 3.00 • 075095-030

JIS 75.00 12.00 13.00 • UN 75 075095-130

75.00 13.50 14.50 • 374295 075095-145

80.00 3.00 3.00 • 080095-030

80.00 12.00 13.00 • 374314 080095-130

MF 85.00 2.30 2.30 • 085095-023

05/06 05/21
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 22

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

95.00 85.00 6.70 7.50 • 374334 085095-075

85.00 7.00 8.00 • • 374334 085095-080

85.00 8.50 9.50 • • 374334 085095-095

85.00 12.00 13.00 • 374334 085095-130

85.00 13.50 14.50 • 374334 085095-145

100.00 75.00 18.00 19.00 • 393295 075100-190

JIS 78.00 14.50 15.00 • KYB 100 078100-150

80.00 3.00 3.00 • 080100-030

80.00 9.50 10.50 • 393314 080100-105

80.00 10.00 11.00 • • 393314 080100-110

80.00 11.50 12.00 • 393314 080100-120

JIS 80.00 12.00 13.00 • • • UN 80 080100-130

80.00 13.50 14.00 • • • 393314 080100-145

85.00 3.00 3.00 • 085100-030

JIS 85.00 9.00 10.00 • • UHS 85 085100-100

85.00 11.00 12.00 • 393334 085100-120

85.00 12.00 12.50 • 393334 085100-125

85.00 12.00 13.00 • 393334 085100-130

85.00 14.00 15.00 • 393334 085100-150

85.00 14.00 15.00 • 393334 085100-150

86.00 12.00 13.00 • 393338 086100-130

88.00 9.00 10.00 • 393346 088100-100

90.00 7.00 8.00 • • 393354 090100-080

90.00 8.00 9.00 • • 393354 090100-090

90.00 10.50 11.50 • 393354 090100-115

90.00 12.00 13.00 • 393354 090100-130

101.60 80.00 12.00 13.00 • 400314 080101-130

105.00 85.00 3.00 3.00 • 085105-030

85.00 12.00 13.00 • • 413334 085105-130

90.00 2.00 2.00 • 090105-020

90.00 3.00 3.00 • 090105-030

90.00 7.00 8.00 • 413354 090105-080

JIS 90.00 9.00 10.00 • • UHS 90 090105-100

05/22 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 23

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

105.00 90.00 12.00 13.00 • • 413354 090105-130

95.00 3.00 3.00 • 095105-030

107.00 95.00 12.00 12.50 • 421374 095107-125

JIS 110.00 88.00 14.50 15.00 • KYB 110 088110-150

JIS 90.00 3.00 3.00 • 090110-030

90.00 10.00 11.00 • 433354 090110-110

JIS 90.00 12.00 13.00 • • 433354 090110-130

90.00 18.00 19.00 • 433354 090110-190

JIS 95.00 2.00 2.00 • 095110-020

JIS 95.00 3.00 3.00 • 095110-030

JIS 95.00 9.00 10.00 • • UHS 95 095110-100

95.00 12.00 13.00 • • • 433374 095110-130

95.00 15.00 16.00 • 433374 095110-160

100.00 7.00 8.00 • 433393 100110-080

100.00 13.50 14.50 • 433393 100110-145

111.00 101.00 5.50 6.00 • 437397 101111-060

112.00 95.00 11.00 12.00 • 441374 095112-120

JIS 98.00 9.00 10.00 • UHS 98 098112-100

115.00 85.00 15.00 16.00 • 452334 085115-160

90.00 22.00 23.00 • 452354 090115-230

JIS 95.00 3.00 3.00 • 095115-030

95.00 10.00 11.00 • 452354 095115-110

JIS 95.00 12.00 13.00 • 452374 095115-130

95.00 18.00 19.00 • 452374 095115-190

JIS 100.00 3.00 3.00 • 100115-030

100.00 7.00 8.00 • 452393 100115-080

JIS 100.00 9.00 10.00 • • UHS 100 100115-100

100.00 10.50 11.50 • 452393 100115-115

100.00 12.00 13.00 • 452393 100115-130

105.00 13.50 14.50 • 452413 105115-145

107.00 7.50 8.00 • 452421 107115-080

120.00 95.00 12.00 13.00 • 472374 095120-130

95.00 19.00 20.00 • 472374 095120-200

05/06 05/23
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 24

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

JIS 120.00 98.00 14.50 15.00 • KYB 120 098120-150

JIS 100.00 3.00 3.00 • 100120-030

100.00 10.00 11.00 • 472393 100120-110

JIS 100.00 12.00 13.00 • • 472393 100120-130

100.00 13.50 14.50 • 472393 100120-145

103.00 16.00 17.00 • 472405 103120-170

105.00 3.00 3.00 • 105120-030

105.00 8.00 9.00 • 472413 105120-090

JIS 105.00 9.00 10.00 • • UHS 105 105120-100

105.00 11.00 12.00 • • 472413 105120-120

105.00 15.00 16.00 • 472413 105120-160

106.00 8.50 9.50 • • 472417 106120-095

108.00 9.00 10.00 • 472425 108120-100

121.00 111.00 6.00 6.50 • 476437 111121-065

125.00 100.00 12.00 13.00 • 492393 100125-130

100.00 15.00 16.00 • 492393 100125-160

JIS 103.00 14.50 15.00 • KYB 125 103125-150

105.00 3.00 3.00 • 105125-030

105.00 12.00 13.00 • • • 492413 105125-130

JIS 105.00 15.00 16.00 • • UN 105 105125-160

110.00 3.00 3.00 • 110125-030

JIS 110.00 9.00 10.00 • • UHS 110 110125-100

110.00 12.00 13.00 • 492433 110125-130

110.00 15.00 16.00 • 492433 110125-160

JIS 112.00 9.00 10.00 • • UHS 112 112125-100

113.00 9.50 10.50 • 492444 113125-105

115.00 7.00 8.00 • • 492452 115125-080

115.00 15.00 16.00 • 492452 115125-160

JIS 126.00 106.00 16.00 17.00 • UN 106 106126-170

115.00 15.00 16.00 • 496452 115126-160

127.00 115.00 9.00 10.00 • 500452 115127-100

130.00 100.00 12.00 13.00 • 511393 100130-130

104.00 19.00 19.50 • 511409 104130-195

05/24 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 25

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

JIS 130.00 108.00 14.50 15.00 • KYB 180 108130-150

110.00 3.00 3.00 • 110130-030

110.00 10.00 11.00 • 511433 110130-110

110.00 12.00 13.00 • • 511433 110130-130

JIS 110.00 15.00 16.00 • • UN 110 110130-160

110.00 18.00 19.00 • 511433 110130-190

115.00 3.00 3.00 • 115130-030

115.00 7.50 8.50 • 511452 115130-085

115.00 11.00 12.00 • 511452 115130-120

118.00 12.00 12.50 • 511464 118130-125

120.00 7.50 8.00 • 511472 120130-080

120.00 13.50 14.50 • 511472 120130-145

120.00 14.00 15.00 • 511472 120130-150

JIS 132.00 112.00 16.00 17.00 • UN 112 112132-170

133.00 121.00 7.50 8.00 • 523476 121133-080

134.00 126.00 7.50 8.00 • 527496 126134-080

135.00 115.00 13.50 14.50 • 531452 115135-145

JIS 115.00 15.00 16.00 • UN 115 115135-160

120.00 3.00 3.00 • 120135-030

JIS 120.00 9.00 10.00 • UHS 120 120135-100

120.00 15.00 16.00 • 531472 120135-160

140.00 114.00 12.00 13.00 • 551448 114140-130

115.00 15.00 16.00 • 551452 115140-160

115.00 22.00 23.00 • 551452 115140-230

JIS 118.00 14.50 15.00 • KYB 140 118140-150

120.00 3.00 3.00 • 120140-030

120.00 10.00 11.00 • • 551472 120140-110

120.00 12.00 12.50 • 551472 120140-125

120.00 12.00 13.00 • • 551472 120140-130

JIS 120.00 15.00 16.00 • UN 120 120140-160

125.00 2.00 2.00 • 125140-020

125.00 3.00 3.00 • 125140-030

JIS 125.00 9.00 10.00 • • UHS 125 125140-100

05/06 05/25
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 26

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

140.00 125.00 11.00 12.00 • • 551492 125140-120

125.00 15.00 16.00 • 551492 125140-160

145.00 125.00 11.00 12.50 • 570492 125145-125

JIS 125.00 15.00 16.00 • UN 125 125145-160

125.00 18.00 19.00 • 570492 125145-190

130.00 2.00 2.00 • 130145-020

150.00 125.00 13.50 14.50 • 590492 125150-145

JIS 128.00 14.50 15.00 • KYB 150 128150-150

130.00 3.00 3.00 • 130150-030

130.00 10.00 11.00 • 590511 130150-110

130.00 15.00 16.00 • • 590511 130150-160

135.00 11.00 12.00 • 590531 135150-120

135.00 15.00 16.00 • 590531 135150-160

JIS 136.00 9.00 10.00 • • UHS 136 136150-100

140.00 7.00 8.00 • 590551 140150-080

155.00 125.00 15.00 16.00 • 610492 125155-160

JIS 135.00 15.00 16.00 • UN 135 135155-160

JIS 140.00 9.00 10.00 • • UHS 140 140155-100

140.00 11.00 12.00 • 610551 140155-120

140.00 15.00 16.00 • 610551 140155-160

158.00 146.00 7.50 8.00 • 622575 146158-080

160.00 130.00 18.00 19.00 • 629511 130160-190

135.00 15.00 16.00 • 629531 135160-160

135.00 32.00 33.00 • 629531 135160-330

JIS 138.00 14.50 15.00 • KYB 160 138160-150

140.00 3.00 3.00 • 140160-030

140.00 12.00 13.00 • 629551 140160-130

140.00 13.50 14.50 • 629551 140160-145

JIS 140.00 15.00 16.00 • UN 140 140160-160

145.00 2.00 2.00 • 145160-020

JIS 145.00 9.00 10.00 • • UHS 145 145160-100

148.00 7.10 7.50 • 629582 148160-075

ISO 165.00 140.00 19.00 20.00 • 649551 140165-200

05/26 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 27

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

JIS 165.00 145.00 15.00 16.00 • UN 145 145165-160

JIS 150.00 9.00 10.00 • • UHS 150 150165-100

JIS 148.00 14.50 15.00 • KYB170 148170-150

150.00 3.00 3.00 • 150170-030

JIS 150.00 15.00 16.00 • • UN 150 150170-160

150.00 18.00 19.00 • 669590 150170-190

155.00 2.00 2.00 • 155170-020

155.00 9.00 10.00 • 669610 155170-100

155.00 11.00 12.00 • 669610 155170-120

174.85 165.25 7.30 7.50 • 685649 165174-075

175.00 150.00 12.00 13.00 • 688590 150175-130

JIS 160.00 9.00 10.00 • • UHS 160 160175-100

180.00 150.00 19.00 20.00 • 708590 150180-200

JIS 158.00 14.50 15.00 • KYB 180 158180-150

160.00 4.00 4.00 • 160180-040

160.00 13.50 14.50 • 708629 160180-145

160.00 15.00 16.00 • 708629 160180-160

JIS 165.00 9.00 10.00 • UHS 165 165180-100

166.00 15.50 16.50 • 708653 166180-165

182.70 170.00 9.50 10.00 • 719669 170182-100

183.00 171.00 7.50 8.00 • 720673 171183-080

185.00 160.00 3.00 3.00 • 160185-030

160.00 12.00 13.00 • 728629 160185-130

JIS 160.00 15.00 16.00 • 728629 160185-160

165.00 3.00 3.00 • 165185-030

JIS 190.00 168.00 14.50 15.00 • KYB 190 168190-150

170.00 3.00 3.00 • 170190-030

170.00 15.00 16.00 • • 748669 170190-160

175.00 2.00 2.00 • 175190-020

JIS 175.00 9.00 10.00 • • 748688 175190-100

175.00 11.00 12.00 • 748688 175190-120

195.00 170.00 3.00 3.00 • 170195-030

170.00 19.00 20.00 • 767669 170195-200

05/06 05/27
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 28

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

200.00 170.00 18.00 19.00 • 787669 170200-190

175.00 14.00 14.50 • 787688 175200-145

JIS 175.00 15.00 16.00 • • 787688 175200-160

JIS 180.00 12.00 13.00 • • UHS 180 180200-130

180.00 15.00 16.00 • 787708 180200-160

JIS 205.00 180.00 3.50 3.50 • 180205-035

JIS 180.00 19.00 20.00 • 807708 180205-200

185.00 3.00 3.00 • 185205-030

209.00 197.00 7.50 8.00 • 823775 197209-080

210.00 190.00 4.00 4.00 • 190210-040

JIS 190.00 12.00 13.00 • UHS 190 190210-130

190.00 15.00 16.00 • 826748 190210-160

195.00 2.50 2.50 • 195210-025

195.00 9.00 10.00 • 826767 195210-100

215.00 190.00 4.00 4.00 • 190215-040

190.00 12.00 13.00 • 846748 190215-130

190.00 15.00 16.00 • 846748 190215-160

190.00 19.00 20.00 • 846748 190215-200

JIS 193.00 14.50 15.00 • KYB 215 215193-145

220.00 180.00 20.00 21.00 • 866708 180220-210

JIS 200.00 12.00 13.00 • UHS 200 200220-130

200.00 15.00 16.00 • • 866787 200220-160

JIS 224.00 204.00 12.00 13.00 • OSI 224 204224-130

225.00 200.00 18.00 19.00 • 885787 200225-190

JIS 203.00 14.50 15.00 • KYB 225 203225-150

235.00 210.00 19.00 20.00 • 925826 210235-200

220.00 11.00 12.00 • 925866 220235-120

223.00 7.50 8.00 • 925878 223235-080

240.00 210.00 22.00 23.00 • 944826 210240-230

220.00 3.00 3.00 • 220240-030

220.00 4.00 4.00 • 220240-040

220.00 12.00 13.00 • 944866 220240-130

245.00 225.00 15.00 16.00 • 964886 225245-160

05/28 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 29

RSE RSEA RSEA RSS MAD

JPS CPE CP 19M

Single Acting
Piston Seals
Bore Dia Hsg Dia Seal Ln Hsg Ln
ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

247.00 235.00 9.00 10.00 • 972925 235247-100

250.00 220.00 18.00 19.00 • 984866 220250-190

225.00 12.00 13.00 • 984886 225250-130

225.00 19.00 20.00 • 984886 225250-200

230.00 4.00 4.00 • 230250-040

230.00 15.00 16.00 • • 984905 230250-160

255.00 230.00 19.00 20.00 • 1003905 230255-200

240.00 12.00 13.00 • 1003944 240255-130

260.00 240.00 4.00 4.00 • 240260-040

261.00 249.00 7.00 8.00 • 1027980 249261-080

270.00 240.00 22.00 23.00 • 1062944 240270-230

245.00 15.00 16.00 • 1062965 245270-160

250.00 4.00 4.00 • 250270-040

250.00 15.00 16.00 • 1062984 250270-160

280.00 250.00 18.00 19.00 • 1102984 250280-190

250.00 22.00 23.00 • 1102984 250280-230

260.00 15.00 16.00 • 11021024 260280-160

290.00 265.00 12.00 13.00 • 11411043 265290-130

265.00 17.00 18.00 • 11411043 265290-180

270.00 17.00 18.00 • 11411062 270290-180

300.00 270.00 15.00 16.00 • 11811062 270300-160

280.00 15.00 16.00 • 11811102 280300-160

305.00 280.00 12.00 13.00 • 12001102 280305-130

280.00 19.00 20.00 • 12001102 280305-200

310.00 280.00 22.00 23.00 • 12201102 280310-230

290.00 15.00 16.00 • 12201141 290310-160

320.00 285.00 20.00 21.00 • 12591122 285320-210

290.00 21.00 22.00 • 12591141 290320-220

295.00 19.00 20.00 • 12501161 295320-200

300.00 15.00 16.00 • 12591181 300320-160

305.00 17.00 18.00 • 12591200 305320-180

330.00 310.00 15.00 16.00 • 12991220 310330-160

340.00 320.00 15.00 16.00 • 13381259 320340-160

05/06 05/29
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 30

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød SL L 19M RSS MAD RSE RSEA JPS CP CPE Ref Size Code

350.00 320.00 22.00 23.00 • 13771259 320350-230

325.00 19.00 20.00 • 13771279 325350-200

360.00 340.00 15.00 16.00 • 14171338 340360-160

370.00 350.00 15.00 16.00 • 14561377 350370-160

380.00 340.00 21.00 22.00 • 14961338 340380-220

360.00 15.00 16.00 • 14961417 360380-160

385.00 350.00 24.40 25.40 • 15151377 350385-254

390.00 360.00 22.00 23.00 • 15351417 360390-230

370.00 15.00 16.00 • 15351456 370390-160

400.00 380.00 15.00 16.00 • 15741496 380400-160

410.00 385.00 12.00 13.00 • 16141515 385410-130

05/30 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 1

RSEW
NR
Piston Seals with Wear Rings

S E A L S

Design
Single acting seals

RSEW u-cup are a specialised piston seal design

manufactured from Polyurethane 92 Shore A, with an anti-
extrusion, guidance wear ring, made from Polyacetyl resin on
the outside heal of the seal. Having an inside diameter smaller
than the groove for which it is intended, insures a tight fit in the
groove to prevent movement during operation. It also provides
sufficient preload to prevent interference with the cylinder wall
due to thermal expansion of the seal at higher operating
temperatures. The static lip is thinner as it’s in full contact with
groove diameter the dynamic lip is heavier to improve higher
pressure capability. Both lips have precision knife trimmed
Key Features chamfers to provide complete circumferential lip contact.

Medium to heavy duty Operating Conditions

Piston only Pressure

400 Bar
Excellent wear properties 6,000 Psi

Temperature
Medium to higher pressures
-40° to 105°C
-40° to 221°F
Excellent extrusion
Speed
resistance
0.8m /sec
2.5'/sec

Surface Finish µmRa

ØD Ød1 Ød2 Ød3 L1 L2
20˚ to 30˚

ØD
0.1 - 0.25 ≤0.8 2.0 2.0 2.0 2.0
Ød1

C/S T Tolerances
C ØD Ød1 Ød2 Ød3 L1 L2
H10 -0.0 -0.05 -0.0 -0.0 -0.0
+0.1 +0.00 +0.1 +0.25 +0.1

L1
r1 Chamfer Radii
r2
c/s 5.0 7.5 10.0
L2 C 2.5 4.0 5.0
45° x 1mm r1 0.4 0.6 0.8
r2 0.2 0.2 0.2

Typical Examples
Reciprocating Rotary Oscillating Helix
Ød2

Ød3
Similar Styles

05/06 06/1
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 2

CPLR
NR
Piston Seals with Wear Rings

S E A L S

Design
Single acting seals

CPLR are for use as a single acting piston seal on solid

pistons with Polyacetyl circlip provided. The seal is a
precision moulded Nitrile rubber sealing element with a fabric
reinforced base. The seal is fitted with a Polyacetyl anti-
extrusion bearing ring to the outside diameter heal to allow
larger machining clearances between the piston head and
cylinder bore and to permit higher working pressures.
Manufactured with initial radial interference to effect low
pressure sealing, as pressure increases the seal is energised
thus increasing the sealing force. Rubberised fabric has the
advantage of retaining the sealing media within its surfaces
Key Features reducing friction and wear.

Medium to heavy duty Operating Conditions

Piston only Pressure

400 Bar
Excellent extrusion 6,000 Psi

resistance Temperature
-30° to 100°C
Medium to higher pressures -22° to 212°F

Speed
Excellent wear properties
0.5m /sec
1.5'/sec

Surface Finish µmRa

ØD Ød1 Ød2 Ød3 L1 L2
0.1 - 0.25 ≤0.8 2.0 2.0 1.0 2.0
20˚ to 30˚

ØD

Ød1
Tolerances
C/S T
ØD Ød1 Ød2 Ød3 L1 L2
C
H10 js11 js10 js11 -0 +0.25 -0 +0.10

Chamfer Radii
L1
r2
r1 c/s 5.0 7.5 10.0
C 2.5 4.0 5.0
L2 r1 0.4 0.6 0.8
45° x 1mm
r2 0.2 0.2 0.2

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød2

Ød3 Similar Styles

06/2 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 3

RSEW RSEWR CPW CPLR

Single Acting
Piston Seals
Bore Dia Hsg Dia Hsg Ln Brg Ln Brg Dia Piston Dia
OD od1 L1 L2 od2 od3 Euro Ref Product Code

32.00 20.00 9.00 6.35 28.50 31.00 125078 RSEW-020032-090

35.00 22.00 10.00 6.35 31.40 34.00 137086 RSEW-022035-100

40.00 25.00 9.50 6.35 35.40 39.00 157098 RSEW-025040-095

26.00 9.50 6.35 35.40 39.00 157102 RSEW-026040-095

28.00 9.00 6.35 35.40 38.70 157110 CPLR-028040-090

45.00 30.00 10.00 6.35 40.40 44.00 177118 RSEW-030045-100

35.00 9.50 6.35 40.40 44.00 177137 RSEW-035045-095

50.00 30.00 14.50 6.35 44.30 48.30 196118 CPLR-030050-145

30.00 14.50 6.35 44.30 48.50 196118 RSEW-030050-145

35.00 11.50 6.35 43.96 48.10 196137 GPWR-035050-115

35.00 11.00 6.35 45.35 48.50 196137 RSEW-035050-110

40.00 11.00 6.35 45.40 48.50 196157 RSEW-040050-110

55.00 40.00 11.00 6.35 50.35 53.65 216157 GPWR-040055-110

40.00 11.00 6.35 50.35 53.50 216157 RSEW-040055-110

60.00 40.00 14.50 6.35 55.40 58.50 236157 RSEW-040060-145

40.00 14.50 6.35 54.20 58.50 236157 RSEW-040060-145/1

45.00 11.00 6.35 55.40 58.50 236177 RSEW-045060-110

45.00 11.00 6.35 54.20 58.50 236177 RSEW-045060-110/1

63.00 45.00 11.00 6.35 58.40 61.00 248177 CPLR-045063-110

45.00 11.00 6.35 58.40 61.50 248177 RSEW-045063-110

65.00 45.00 14.50 6.35 59.20 63.40 255177 CPLR-045065-145

50.00 11.00 6.35 60.40 63.50 255196 RSEW-050065-110

70.00 50.00 14.50 6.35 64.20 68.30 275196 CPLR-050070-145

50.00 14.50 6.35 64.20 68.50 275196 RSEW-050070-145

80.00 60.00 13.00 6.35 74.15 78.50 314236 RSEW-060080-130

60.00 14.50 6.35 74.15 78.35 314236 GPW-060080-145

60.00 14.50 6.35 74.15 78.35 314236 GPWR-060080-145

60.00 14.50 6.35 74.15 78.50 314236 RSEW-060080-145/1

90.00 70.00 13.00 6.35 84.15 88.50 354275 RSEW-070090-130

70.00 14.50 6.35 84.20 88.30 354275 CPLR-070090-145

70.00 14.50 6.35 84.15 88.50 354275 RSEW-070090-145/1

100.00 80.00 14.50 6.35 94.20 98.30 393314 CPLR-080100-145

80.00 14.50 6.35 93.15 98.50 393314 RSEW-080100-145

05/06 06/3
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 4

L2 L1 C

ØD
Ød3
Ød2
Ød1

NR
S E A L S

Bore Dia Hsg Dia Hsg Ln Brg Ln Brg Dia Piston Dia
OD od1 L1 L2 od2 od3 Euro Ref Product Code

100.00 80.00 14.50 6.35 94.15 98.50 393314 RSEW-080100-145/1

104.50 85.00 13.00 6.35 98.70 102.80 411334 CPLR-085104-130

110.00 90.00 13.00 6.35 104.10 108.30 433354 CPLR-090110-130

95.00 13.00 6.35 103.10 108.50 433374 RSEW-095110-130

115.00 95.00 14.50 6.35 109.00 113.00 452374 CPLR-095115-145

120.00 100.00 14.50 6.35 113.10 118.50 472393 RSEW-100120-145

100.00 14.50 6.35 114.10 118.50 472393 RSEW-100120-145/1

125.00 105.00 12.50 6.35 119.30 123.30 492413 CPLR-105125-125

06/4 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 1

VS1
NR
Piston Seal V Pack Sets

S E A L S

Design
Single acting seals

VS1 are a single acting rod or piston seal for medium to

heavy duty applications. The assembly consists of a male
and female adaptor with a series of ‘V’ shaped rings. The
number of ‘V’ rings may be varied to alter the assembled
height. The material is generally fabric reinforced Nitrile
rubber, although some sets incorporate Nitrile only ‘V’ rings
to assist low pressure sealing. This is a non preferred design
but it still has a place in applications where difficult
conditions prevail such as pressure surges and misalignment.

Key Features
Medium to heavy duty Operating Conditions

Piston or rod Pressure

400 Bar
Wide size range 6,000 Psi

Temperature
Handles some misalignment
-40° to 110°C
-40° to 220°F
Hard wearing
Speed
0.5m /sec
1.5'/sec

Surface Finish µmRa

ØD
ØD Ød L
20˚ to 30˚

0.1 - 0.25 ≤0.8 2.0

Ød

C/S Tolerances
C ØD Ød L
H10 h10 -0 + 0.2

L
Chamfer Radii
c/s 5.0 7.5 10.0
C 2.5 4.0 5.0
r 0.3 0.4 0.6

L Typical Examples
r
Reciprocating Rotary Oscillating Helix

Similar Styles

05/06 07/1
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 2
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 3

VS1

Piston Seal V Pack Sets

Single Acting
Bore Dia Hsg Dia Hsg Ln
ØD Ød L Con-Fig Euro Ref Product Code

26.00 16.00 18.50 1.3.2.1 102063 VS1-016026-185

28.00 18.00 18.50 1.3.2.1 110070 VS1-018028-185

30.00 20.00 18.50 1.3.2.1 118078 VS1-020030-185

31.50 20.00 17.30 1.3.0.1 124078 VS1-020031-175

32.00 20.00 22.50 1.3.2.1 125078 VS1-020032-225

22.00 17.90 1.3.0.1 125086 VS1-022032-181

35.00 25.00 17.10 1.3.0.1 137098 VS1-025035-173

37.00 25.00 22.50 1.3.2.1 145098 VS1-025037-225

40.00 25.00 11.50 1.1.0.1 157098 VS1-025040-115

25.00 22.50 1.3.2.1 157098 VS1-025040-225

28.00 22.50 1.3.2.1 157110 VS1-028040-225

30.00 18.50 1.3.2.1 157118 VS1-030040-185

42.00 27.00 11.00 1.1.0.1 165106 VS1-027042-110

30.00 22.50 1.3.2.1 165118 VS1-030042-225

45.00 30.00 22.50 1.3.2.1 177118 VS1-030045-225

47.00 32.00 22.50 1.3.2.1 185125 VS1-032047-225

35.00 22.50 1.3.2.1 185137 VS1-035047-225

48.00 36.00 22.50 1.3.2.1 188141 VS1-036048-225

50.00 35.00 22.50 1.3.2.1 196137 VS1-035050-225

40.00 23.00 1.3.0.1 196157 VS1-040050-230

55.00 40.00 11.50 1.1.0.1 216157 VS1-040055-115

40.00 22.50 1.3.2.1 216157 VS1-040055-225

45.00 17.30 1.3.0.1 216177 VS1-045055-175

60.00 40.00 30.00 1.3.0.1 236157 VS1-040060-300

45.00 22.50 1.3.2.1 236177 VS1-045060-225

63.00 48.00 12.50 1.1.0.1 248188 VS1-048063-125

65.00 45.00 27.50 1.3.2.1 255177 VS1-045065-275

50.00 22.50 1.3.2.1 255196 VS1-050065-225

70.00 50.00 30.00 1.2.0.1 275196 VS1-050070-300

55.00 22.50 1.3.2.1 275216 VS1-055070-225

55.00 26.30 1.3.0.1 275216 VS1-055070-265

71.00 56.00 22.50 1.3.2.1 279220 VS1-056071-225

75.00 55.00 26.00 1.3.0.1 295216 VS1-055075-260

05/06 07/3
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 4

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Hsg Ln

ØD Ød L Con-Fig Euro Ref Product Code

75.00 60.00 22.50 1.3.2.1 295236 VS1-060075-225

80.00 60.00 26.00 1.3.0.1 314236 VS1-060080-260

60.00 37.00 1.3.2.1 314236 VS1-060080-370

65.00 22.50 1.3.2.1 314255 VS1-065080-225

83.00 63.00 37.00 1.3.2.1 326248 VS1-063083-370

85.00 65.00 30.00 1.3.0.1 334255 VS1-065085-300

65.00 40.00 1.3.2.1 334255 VS1-065085-400

70.00 22.50 1.3.2.1 334275 VS1-070085-225

90.00 70.00 30.00 1.3.0.1 354275 VS1-070090-300

70.00 40.00 1.3.2.1 354275 VS1-070090-400

75.00 22.50 1.3.2.1 354295 VS1-075090-225

95.00 75.00 30.00 1.3.0.1 374295 VS1-075095-300

80.00 22.50 1.3.2.1 374314 VS1-080095-225

100.00 80.00 30.00 1.3.0.1 393314 VS1-080100-300

80.00 41.50 1.3.2.1 393314 VS1-080100-415

85.00 22.50 1.3.2.1 393334 VS1-085100-225

105.00 90.00 22.50 1.3.2.1 413354 VS1-090105-225

110.00 90.00 30.00 1.3.0.1 433354 VS1-090110-300

90.00 40.00 1.3.2.1 433354 VS1-090110-400

95.00 23.80 1.3.0.1 433374 VS1-095110-240

120.00 100.00 40.00 1.4.1.1 472393 VS1-100120-400

125.00 100.00 27.50 1.3.0.1 492393 VS1-100125-275

140.00 120.00 30.00 1.3.0.1 551472 VS1-120140-300

150.00 125.00 27.20 1.2.1.1 590492 VS1-125150-274

130.00 29.56 1.3.0.1 590511 VS1-130150-297

160.00 130.00 41.00 1.3.0.1 629511 VS1-130160-415

180.00 150.00 60.00 1.3.2.1 708590 VS1-150180-600

210.00 180.00 32.80 1.3.0.1 826708 VS1-180210-330

230.00 200.00 32.80 1.3.0.1 905787 VS1-200230-330

270.00 240.00 44.80 1.3.0.1 1062944 VS1-240270-450

250.00 31.80 1.3.0.1 1062984 VS1-250270-320

280.00 250.00 32.80 1.3.0.1 1102984 VS1-250280-330

315.00 280.00 38.25 1.3.0.1 12401102 VS1-280315-384

07/4 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 5

VS1

Piston Seal V Pack Sets

Single Acting
Bore Dia Hsg Dia Hsg Ln
ØD Ød L Con-Fig Euro Ref Product Code

320.00 300.00 31.80 1.3.0.1 12591181 VS1-300320-320

330.00 310.00 29.80 1.3.0.1 12991220 VS1-310330-300

350.00 315.00 38.25 1.3.0.1 13771240 VS1-315350-384

365.00 320.00 54.80 1.3.0.1 14371259 VS1-320365-550

380.00 340.00 59.80 1.3.0.1 14961338 VS1-340380-600

05/06 07/5
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 6
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 1

GPP
NR
Pneumatic Piston Seals

S E A L S

Design
Single acting seals

GPP is designed for use as a piston seal in either single or

double acting applications where two seals are mounted
back-to-back in separate grooves. An easy to fit low
pressure seal, type GPP are made from extremely flexible
wear resistant Polyurethane 90 Shore A to increase seal life
and to facilitate being used in NON-LUBRICATED air
applications. Type GPP have a thicker and longer static
sealing lip to form a buffer against axial movement. The
dynamic lip with no sharp edge reduces friction.

Key Features
Lubricated / non-lubricated Operating Conditions
air applications Pressure
16 Bar
Piston only 230 Psi
Pneumatic

Low pressure capability Temperature

-30° to 80°C
Dynamic lip reaction -22° to 176°F

Speed
Low friction
1.0m /sec
Excellent wear resistance 3.0'/sec

Surface Finish µmRa

25° ØD
ØD Ød L
0.1 - 0.25 ≤0.8 2.0
C/S Ød

Tolerances
C
ØD Ød L G
H10 h10 -0 + 0.2 0.25

L r
Chamfer Radii
G/2
c/s 1.5 3.0 5.0 7.5 10.0
C 1.0 2.0 2.5 3.0 3.0
r 0.2 0.2 0.2 0.2 0.2
G/2

L r
Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 08/1
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 2

DE
NR
Pneumatic Piston Seals

S E A L S

Design
Single acting seals

DE are designed as an easy to fit low pressure seal, type DE are

made from Nitrile rubber 75 Shore A intended for LUBRICATED
pneumatic applications. Type DE have a thicker and longer static
sealing lip to form a buffer against axial movement. To ensure that
type DE seals are fitted snugly in the grooves, they are moulded
somewhat smaller than groove sizes and in the free state appear
to be too small for there respective housings. However, the
correct dynamic sealing lip interference is provided when the seal
is stretched into its groove. In double acting applications the two
seals should always be in separate grooves and facing away from
one another to avoid a pressure trap. (For NON LUBRICATED air
Key Features pneumatic applications refer to GPP style)

Light duty Operating Conditions

Piston only Pressure

16 Bar
Pneumatic
Low pressure capability 230 Psi

Temperature
Dynamic lip reaction
-30° to 100°C
-22° to 212°F
Low friction
Speed
Easy to fit 0.5m /sec
1.5'/sec

Surface Finish µmRa

25° ØD
ØD Ød L
0.1 - 0.25 ≤0.8 2.0
C/S Ød

Tolerances
C
ØD Ød L G
H8 f7 -0 + 0.2 0.25

L r
Chamfer Radii
G/2
C/S 5.0 7.5 10.0
C 2.5 4.0 5.0
r 0.2 0.4 0.4
G/2

L r
Typical Examples
Reciprocating Rotary Oscillating Helix

08/2 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 3

U-70
NR
Pneumatic Piston Seals

S E A L S

Design
Single acting seals

U-70 type rubber single acting seals are designed for rods or
pistons. Made from Nitrile 70 Shore A this type can handle
low pressure applications, although predominately used in
pneumatic cylinders, low pressure hydraulic cylinders can be
accommodated. These precision moulded seals have equally
distributed heal clearance and lip to housing interference. In
double acting applications the two seals should always be in
separate grooves and facing away from one another to avoid
a pressure trap.

Key Features
Light duty Operating Conditions

Piston or rod Pressure

16 Bar
Low pressure capability 230 Psi
Pneumatic
Temperature
Dynamic lip reaction
-30° to 100°C
-22° to 212°F
Low friction
Speed
Easy to fit 0.5m /sec
1.5'/sec

Surface Finish µmRa

25° ØD
ØD Ød L
0.1 - 0.25 ≤0.8 2.0
C/S Ød

Tolerances
C
ØD Ød L G
H8 f7 -0 + 0.2 0.25

L r
Chamfer Radii
G/2
C/S 5.0 7.5 10.0
C 2.5 4.0 5.0
r 0.2 0.4 0.4
G/2

L r
Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 08/3
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 4

U-90
NR
Pneumatic Piston Seals

S E A L S

Design
Single acting seals

U-90 type rubber single acting seals are designed for rods or
pistons. Made from Nitrile 90 Shore A this type can handle
low to medium pressure applications, although predominately
used in pneumatic cylinders, low to medium pressure
hydraulic cylinders can be accommodated. These precision
moulded seals have equally distributed heal clearance and lip
to housing interference. In double acting applications the two
seals should always be in separate grooves and facing away
from one another to avoid a pressure trap.

Key Features
Light to meduim duty Operating Conditions

Piston or rod Pressure

85 Bar
Dynamic lip reaction 1,250 Psi
Pneumatic
Temperature
Low friction
-30° to 100° C
-22° to 212° F
Easy to fit
Speed
0.5m /sec
1.5'/sec

Surface Finish µmRa

25° ØD
ØD Ød L
0.1 - 0.25 ≤0.8 2.0
C/S Ød

Tolerances
C
ØD Ød1 L G
H8 f7 -0 + 0.2 0.25

L r
Chamfer Radii
G/2
C/S 5.0 7.5 10.0
C 2.5 4.0 5.0
r 0.2 0.4 0.4
G/2

L r
Typical Examples
Reciprocating Rotary Oscillating Helix

08/4 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 5

GPP DE U-70 U-90 19M

Pneumatic Piston Seals

Single Acting
Bore Dia Hsg Dia Seal Ln Hsg Ln Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød1 L Duro. Product Code ØD Ød1 L Duro. Product Code

6.00 3.00 2.00 2.50 GPP-003006-025 28.00 22.00 3.25 3.50 GPP-022028-035

8.00 4.00 2.55 3.00 GPP-004008-030 30.00 15.00 8.00 9.50 NBR90 U-015030-095

4.80 2.30 2.70 GPP-004008-027 18.00 6.00 6.60 NBR90 U-018030-066

4.80 2.55 3.00 GPP-004008-030A 20.00 5.00 5.50 NBR90 U-020030-055

10.00 6.00 2.55 3.00 GPP-006010-030 22.00 3.25 3.50 GPP-022030-035

12.00 6.00 4.00 5.50 NBR75 DE-006012-055 32.00 14.00 10.00 11.50 NBR90 U-014032-115

7.00 2.55 3.00 GPP-007012-030 16.00 8.00 9.50 NBR90 U-016032-095

13.00 8.00 2.55 3.00 GPP-008013-030 22.00 5.00 5.50 NBR90 U-022032-055
14.00 8.00 2.55 3.00 GPP-008014-030 24.00 3.25 3.50 GPP-024032-035

15.00 9.00 2.55 3.00 GPP-009015-030 24.00 5.50 7.00 NBR75 DE-024032-070

16.00 8.00 6.00 7.50 NBR90 U-008016-075 24.00 5.50 6.00 GPP-024032-060

10.00 2.55 3.00 GPP-010016-030 35.00 20.00 10.00 11.00 NBR90 U-020035-110

17.00 11.00 2.55 3.00 GPP-011017-030 25.00 8.00 9.00 NBR90 U-025035-090

18.00 12.00 2.55 3.00 GPP-012018-030 27.00 3.25 3.50 GPP-027035-035

20.00 12.00 4.00 4.50 NBR90 U-012020-045 36.00 16.00 10.00 11.00 NBR90 U-016036-110

12.00 5.50 7.00 NBR75 DE-012020-070 20.00 8.00 9.50 NBR90 U-020036-095

14.00 2.55 3.00 GPP-014020-030 28.00 3.25 3.50 GPP-028036-035

14.00 4.00 4.50 GPP-014020-045 38.00 30.00 3.25 3.50 GPP-030038-035

22.00 12.00 5.00 5.50 NBR90 U-012022-055 30.00 5.50 6.00 GPP-030038-060

14.00 4.00 4.50 NBR90 U-014022-045 40.00 20.00 10.00 11.00 NBR90 U-020040-110

16.00 2.55 3.00 GPP-016022-030 28.00 6.00 6.60 NBR90 U-028040-066

24.00 12.00 6.00 7.50 NBR90 U-012024-075 30.00 5.00 5.50 NBR90 U-030040-055

14.00 5.00 5.50 NBR90 U-014024-055 30.00 7.00 7.50 GPP-030040-075

18.00 2.55 3.00 GPP-018024-030 32.00 3.25 3.50 GPP-032040-035

25.00 15.00 5.00 5.50 NBR90 U-015025-055 42.00 22.00 10.00 11.00 NBR90 U-022042-110

17.00 5.50 6.00 GPP-017025-060 25.00 8.00 9.50 NBR90 U-025042-095

18.00 4.00 4.50 GPP-018025-045 30.00 6.00 6.50 GPP-030042-065

19.00 3.25 3.50 GPP-019025-035 32.00 5.00 5.50 NBR90 U-032042-055

19.00 4.00 4.50 GPP-019025-045 34.00 3.25 3.50 GPP-034042-035

26.00 16.00 5.00 5.50 NBR90 U-016026-055 45.00 30.00 10.00 11.00 NBR90 U-030045-110

28.00 18.00 7.00 7.50 GPP-018028-075 35.00 5.00 5.50 NBR90 U-035045-055

20.00 4.00 4.50 NBR90 U-020028-045 35.00 6.00 7.00 NBR70 U-035045-070

20.00 5.00 5.70 NBR70 U-020028-057 37.00 3.25 3.50 GPP-037045-035

05/06 08/5
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 6

L L

ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød1 L Duro. Product Code ØD Ød1 L Duro. Product Code

48.00 28.00 10.00 11.00 NBR90 U-028048-110 80.00 55.00 12.00 13.00 NBR90 U-055080-130

38.00 5.00 5.50 NBR90 U-038048-055 60.00 10.00 11.00 NBR90 U-060080-110

50.00 25.00 12.00 13.00 NBR90 U-025050-130 67.30 6.35 7.00 GPP-067080-070

30.00 10.00 11.00 NBR90 U-030050-110 68.00 8.50 9.50 GPP-068080-095

35.00 10.00 11.00 NBR90 U-035050-110 70.00 4.25 4.50 GPP-070080-045

38.00 6.00 6.50 NBR90 U-038050-065 70.00 5.00 5.50 NBR90 U-070080-055

40.00 6.00 7.00 NBR70 U-040050-070 85.00 65.00 10.00 11.00 NBR90 U-065085-110

40.00 7.00 7.50 GPP-040050-075 70.00 7.50 8.30 NBR90 U-070085-083

42.00 3.25 3.50 GPP-042050-035 73.00 8.50 9.50 GPP-073085-095

52.00 42.00 4.25 4.50 GPP-042052-045 90.00 60.00 15.00 16.00 NBR75 U-060090-160

55.00 35.00 10.00 11.00 NBR90 U-035055-110 60.00 15.00 16.00 NBR90 U-060090-160A

45.00 5.00 5.50 NBR70 U-045055-055 65.00 15.00 16.00 NBR70 U-065090-160

45.00 7.00 7.50 GPP-045055-075 70.00 10.00 11.00 NBR90 U-070090-110

58.00 48.00 4.25 4.50 GPP-048058-045 78.00 8.50 9.50 GPP-078090-095

60.00 35.00 12.00 13.00 NBR90 U-035060-130 80.00 4.25 4.50 GPP-080090-045

40.00 10.00 11.00 NBR90 U-040060-110 95.00 75.00 10.00 11.00 NBR90 U-075095-110

50.00 5.00 5.50 NBR90 U-050060-055 100.00 75.00 15.00 16.00 NBR90 U-075100-160

50.00 5.00 5.70 GPP-050060-057 80.00 10.00 11.00 NBR90 U-080100-110

50.00 7.00 7.50 GPP-050060-075 85.00 9.00 10.00 NBR90 U-085100-100

63.00 53.00 4.25 4.50 GPP-053063-045 88.00 8.50 9.50 GPP-088100-095

53.00 7.00 7.50 GPP-053063-075 90.00 4.25 4.50 GPP-090100-045

65.00 45.00 10.00 11.00 NBR90 U-045065-110 90.00 5.00 5.50 NBR90 U-090100-055

55.00 7.00 7.50 GPP-055065-075 105.00 85.00 10.00 11.00 NBR90 U-085105-110

68.00 48.00 10.00 11.00 NBR90 U-048068-110 90.00 7.50 8.30 NBR90 U-090105-083
58.00 4.70 5.50 GPP-058068-055 110.00 80.00 15.00 16.00 NBR90 U-080110-160

70.00 50.00 10.00 11.00 NBR90 U-050070-110 85.00 12.00 13.00 NBR90 U-085110-130

55.00 7.50 8.30 NBR90 U-055070-083 90.00 10.00 11.50 NBR90 U-090110-115

58.00 8.50 9.50 GPP-058070-095 95.00 10.00 11.00 GPP-095110-110

60.00 5.00 5.50 NBR90 U-060070-055 120.00 100.00 10.00 11.50 NBR90 U-100120-115

60.00 7.00 7.50 GPP-060070-075 100.00 12.00 13.00 NBR70 U-100120-130

75.00 55.00 10.00 11.00 NBR90 U-055075-110 105.00 10.00 11.00 GPP-105120-110

60.00 7.50 8.30 NBR90 U-060075-083 125.00 95.00 15.00 16.00 NBR90 U-095125-160

63.00 8.50 9.50 GPP-063075-095 100.00 12.00 13.00 NBR90 U-100125-130

08/6 05/06
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 7

GPP DE U-70 U-90 19M

Pneumatic Piston Seals

Single Acting
Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød1 L Duro. Product Code

125.00 105.00 8.25 8.50 GPP-105125-085

110.00 10.00 11.00 GPP-110125-110

140.00 120.00 8.25 8.50 GPP-120140-085

120.00 10.00 11.00 NBR90 U-120140-110

145.00 115.00 12.00 13.00 NBR90 U-115145-130

150.00 120.00 15.00 16.50 NBR90 U-120150-165

125.00 18.00 19.00 NBR90 U-125150-190

160.00 130.00 15.00 16.50 NBR90 U-130160-165

140.00 8.25 8.50 GPP-140160-085

145.00 10.00 11.00 GPP-145160-110

170.00 140.00 15.00 16.50 NBR90 U-140170-165

180.00 150.00 15.00 16.50 NBR90 U-150180-165

160.00 14.00 15.00 GPP-160180-150

190.00 160.00 15.00 16.50 NBR90 U-160190-165

200.00 170.00 15.00 16.50 NBR90 U-170200-165

180.00 8.25 8.50 GPP-180200-085

180.00 14.00 15.00 GPP-180200-150

210.00 180.00 22.00 23.50 NBR90 U-180210-235

250.00 210.00 20.00 21.50 NBR90 U-210250-215

290.00 250.00 20.00 22.00 NBR90 U-250290-220

300.00 260.00 20.00 22.00 NBR90 U-260300-220

05/06 08/7
NRS294-NR Seals Metric 05 8/30/05 2:19 PM Page 8
NRS294-NR Seals Metric 09 8/30/05 2:15 PM Page 1

AMM
NR
Pneumatic Cushion Seals

S E A L S

Design
Cushion seals

AMM is a specifically designed cushion seal, providing

cushioning at the end of the stroke in pneumatic cylinders.
The profile eliminates the limitations in this particular
application that some seal types, like o-rings and lip seals
have. The inlet chamfer on the sealing lip and the groove on
the sealing border at the bottom makes the cushion very
effective. Another advantage is the utilisation of Polyurethane
90 Shore A which with it’s high impact and abrasion
resistance, gives the seal a very long life.

Key Features
Dry or lubricated air Operating Conditions

Low pressure Pressure

16 Bar
Two sealing systems 230 Psi

Temperature
Easy to fit
-30° to 80°C
-22° to 176°F
Handle misalignment
Speed
1.0m/sec
3.0'/sec

Surface Finish µmRa

ØD Ød L
ØD1 0.1 - 0.25 ≤0.8 2.0

Ød1
Tolerances
Ød ØD ØD1 ØD2 Ød1 L b
h10 H11 H11 H11 h11 ± 0.10 + 0.2
- 0.0

Chamfer Radii
Minimum
2.0mm

As noted!
30˚

R 0.2
L

R 2.0
b Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

ØD 2

ØD

05/06 09/1
NRS294-NR Seals Metric 09 8/30/05 2:15 PM Page 2

AMV
NR
Pneumatic Cushion Seals

S E A L S

Design
Cushion seals

AMV are designed specially to provide cushioning to

pneumatic cylinders. Made from a high impact and abrasion
resistant polyurethane 90 Shore A this seal functions as a non
return valve so no separate valve is required. It provides high
cushioning consistency due to automatic centralising, even in
the case of misalignment of the cushioning spear to the
cylinder head. The housing required is similar in size to an
o-ring which provides for simple housings and easy installation.

Key Features
Light duty Operating Conditions

Low pressure Pressure

16 Bar
Easy to fit 230 Psi

Temperature
Compact housing
-30° to 80°C
-22° to 176°F
Handle misalignment
Speed
1.0m /sec
3.0'/sec

Surface Finish µmRa

ØD Ød L
ØD1 0.1 0.8 2.0
<0.25
Ød1
Tolerances
Ød ØD ØD1 ØD2 L Ød1 b
h10 H11 H11 H11 ± 0.1 h11 + 0.2
- 0.0

Chamfer Radii
Minimum
2.0mm

30˚
As noted!

R0.2
L

R2
b
Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

ØD 2

ØD

09/2 05/06
NRS294-NR Seals Metric 09 8/30/05 2:15 PM Page 3

AMM AMV

Hsg Ln Seal Ln
Ød ØD ØD1 ØD2 L Ød1 b B C/S ref. Product Code

6.00 10.00 6.50 8.00 3.70 4.50 2.00 4.00 2.00 PP AMM-006010-037

8.00 11.60 8.50 10.00 3.30 7.00 2.00 3.50 1.80 PP AMM-008011-033

9.50 15.00 10.00 12.00 4.50 8.00 2.00 4.50 2.75 PP AMM-095015-045

10.00 18.00 10.50 12.00 4.80 7.00 2.00 4.60 4.00 V6 AMV-010018-048

18.00 11.00 15.00 7.00 8.00 2.00 7.80 4.00 PP AMM-010018-070

Cushion Seals
12.00 18.00 13.00 15.50 4.80 10.00 2.00 5.00 3.00 PP AMM-012018-048

Pneumatic
20.00 12.50 14.00 4.80 9.00 2.00 4.60 4.00 V6 AMV-012020-048

20.00 13.00 17.00 7.00 10.00 2.00 7.80 4.00 PP AMM-012020-070

14.00 22.00 14.50 16.00 4.80 11.00 2.00 4.60 4.00 V6 AMV-014022-048

22.00 15.00 19.00 7.00 12.00 2.00 7.80 4.00 PP AMM-014022-070

16.00 24.00 16.50 18.00 4.80 13.00 2.00 4.60 4.00 V6 AMV-016024-048

24.00 17.00 21.00 7.00 14.00 2.00 7.80 4.00 PP AMM-016024-070

18.00 26.00 18.50 20.00 4.80 15.00 2.00 4.60 4.00 V6 AMV-018026-048

26.00 19.00 23.00 7.00 16.00 2.00 7.80 4.00 PP AMM-018026-070

20.00 28.00 20.50 22.00 4.80 17.00 2.00 4.60 4.00 V6 AMV-020028-048
28.00 21.00 24.00 7.00 17.50 2.00 7.80 4.00 PP AMM-020028-070

22.00 30.00 22.50 24.00 4.80 18.00 2.00 4.60 4.00 V6 AMV-022030-048

30.00 23.00 26.00 7.00 19.50 2.00 7.80 4.00 PP AMM-022030-070

24.00 32.00 24.50 26.00 4.80 20.00 2.00 4.60 4.00 V6 AMV-024032-048

25.00 33.00 25.50 27.00 4.80 21.00 2.00 4.60 4.00 V6 AMV-025033-048

33.00 26.00 29.00 7.00 22.50 2.00 7.80 4.00 PP AMM-025033-070

26.00 36.00 26.60 28.00 6.00 22.00 2.00 5.80 5.00 V6 AMV-026036-060

28.00 36.00 29.00 32.00 7.00 25.50 2.00 7.80 4.00 PP AMM-028036-070

38.00 28.60 30.00 6.00 24.00 2.00 5.80 5.00 V6 AMV-028038-060

30.00 40.00 30.60 32.00 6.00 26.00 2.00 5.80 5.00 V6 AMV-030040-060

40.00 31.50 35.00 7.00 27.50 2.00 7.80 5.00 PP AMM-030040-070

32.00 42.00 32.60 34.00 6.00 28.00 2.00 5.80 5.00 V6 AMV-032042-060
42.00 33.50 37.00 7.00 29.00 2.00 7.80 5.00 PP AMM-032042-070

34.00 44.00 34.60 36.00 6.00 30.00 2.00 5.80 5.00 V6 AMV-034044-060

35.00 45.00 35.60 37.00 6.00 31.00 2.00 5.80 5.00 V6 AMV-035045-060
36.00 46.00 36.60 38.00 6.00 32.00 2.00 5.80 5.00 V6 AMV-036046-060

46.00 37.50 41.00 7.00 33.00 2.00 7.80 5.00 PP AMM-036046-070

38.00 48.00 38.60 40.00 6.00 34.00 2.00 5.80 5.00 V6 AMV-038048-060

05/06 09/3
NRS294-NR Seals Metric 09 8/30/05 2:15 PM Page 4

b L

ØD

ØD2

NR
ØD1
Ød
Ød1

S E A L S

Hsg Ln Seal Ln
Ød ØD ØD1 ØD2 L Ød1 b B C/S Product Code

40.00 50.00 40.60 42.00 6.00 36.00 2.00 5.80 5.00 V6 AMV-040050-060

50.00 41.50 45.00 7.00 37.00 2.00 7.80 5.00 PP AMM-040050-070

45.00 55.00 45.60 47.00 6.00 41.00 2.00 5.80 5.00 V6 AMV-045055-060

50.00 60.00 50.60 52.00 6.00 46.00 2.00 5.80 5.00 V6 AMV-050060-060

60.00 51.50 55.00 7.00 47.00 2.00 7.80 5.00 PP AMM-050060-070

09/4 05/06
NRS294-NR Seals Metric 09 8/30/05 2:15 PM Page 1

ØD

Ød

Replacement part for

Asian Excavators only

JCS

ØD Ød W Material Product Code

30.00 24.80 5.00 Phenolic JCS-030024-050

25.80 5.00 Phenolic JCS-030025-050

38.00 31.76 6.00 Nylon JCS-038031-060

31.80 6.00 Phenolic JCS-038031-060

33.00 6.00 Phenolic JCS-038033-060

Cushion Seals
38.85 33.65 6.00 Nylon JCS-038033-060

Hydraulic
46.00 41.00 6.00 Nylon JCS-046041-060

64.00 61.05 6.00 Nylon JCS-064061-060

65.00 58.80 6.00 Phenolic JCS-065058-060

60.00 6.00 Nylon JCS-065060-060

69.00 63.00 6.00 Phenolic JCS-069063-060

70.00 65.00 6.00 Nylon JCS-070065-060

70.80 64.80 6.00 Phenolic JCS-070064-060

74.00 68.00 6.00 Phenolic JCS-074068-060

75.00 68.80 6.00 Phenolic JCS-075068-060

70.00 6.00 Nylon JCS-075070-060

78.85 68.85 8.00 Phenolic JCS-078068-080

80.00 73.80 6.00 Phenolic JCS-080073-060

75.00 6.00 Nylon JCS-080075-060

84.00 74.00 8.00 Phenolic JCS-084074-080

85.00 78.76 6.00 Nylon JCS-085078-060

80.00 6.00 Nylon JCS-085080-060

89.00 79.00 8.00 Phenolic JCS-089079-080

90.00 83.80 6.00 Phenolic JCS-090083-060

85.00 6.00 Nylon JCS-090085-060

93.70 83.70 8.00 Phenolic JCS-093083-080

94.00 89.00 6.00 Phenolic JCS-094089-060

95.00 88.80 6.00 Nylon JCS-095088-060

90.00 6.00 Nylon JCS-095090-060

98.85 88.85 8.00 Phenolic JCS-098088-080

100.00 95.00 6.00 Nylon JCS-100095-060

103.50 93.50 8.00 Phenolic JCS-103093-080

107.00 101.80 6.00 Phenolic JCS-107101-060

05/06 10/1
NRS294-NR Seals Metric 09 8/30/05 2:15 PM Page 2

ØD

Ød

NR
S E A L S
Replacement part for
Asian Excavators only

JCS

ØD Ød W Material Product Code

110.00 105.00 6.00 Phenolic JCS-110105-060

115.00 109.80 6.00 Phenolic JCS-115109-060

118.50 108.50 8.00 Phenolic JCS-118108-080

120.00 114.80 6.00 Phenolic JCS-120114-060

122.00 117.00 6.00 Phenolic JCS-122117-060

128.00 116.00 10.00 Phenolic JCS-128116-100

134.00 122.00 10.00 Phenolic JCS-134122-100

10/2 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 1

RS
NR
Hydraulic

S E A L S

Design
Rod seals

RS u-cup is a specialised rod seal design manufactured from

94 Shore A Polyurethane. Developed from the standard
symmetrical U-cup, type RS has an outside diameter larger
than the groove for which it is intended. This insures a tight
fit in the groove to prevent movement of the seal during
cylinder operation and helps overcome problems with
shrinkage and low temperature leakage. The static lip is
thinner as it’s in full contact with the groove diameter, the
dynamic lip is heavier to improve higher pressure capability.
Both lips have precision knife trimmed chamfers to provide
complete circumferential lip contact.
Key Features
Medium to heavy duty Operating Conditions

Rod seal only Pressure

400 Bar
Asymmetrical lip design 6,000 Psi

Temperature
Excellent wear resistance
-40° to 105°C
-40° to 221°F
Good extrusion resistance
Speed
Flexible to fit 0.8m /sec
2.5'/sec

Surface Finish µmRa

Ød ØD L
ØD
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º
Tolerances
C
Ød ØD L
f7 H10 - 0.0 + 0.2

Chamfer Radii
G/2 C/S 5.0 7.5 10.0 15.0 20.0
C 2.5 4.0 5.0 7.5 10 .0
r 0.4 0.8 0.8 1.6 1.6
L r
Extrusion Gap - G
Pressure (Bar) 50 100 200 300 400 500
Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 11/1
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 2

RSL
NR
Hydraulic

S E A L S

Design
Rod seals

RSL asymmetrical single acting rod seal is made from

Polyurethane 94 Shore A and has two sealing lips on the
dynamic surface. The outside diameter is greater than the
nominal dimension for the housing and a fluid ring is
moulded between the primary and secondary sealing lips.
This helps to reduce the area of contact and consequently
the friction and stick slip phenomena. The second sealing lip
also has the function of keeping the entire packing in contact
with the static housing particularly when temperatures get so
low they cause contractions of the sealing ring. Both lips
have precision knife trimmed chamfers to provide complete
Key Features circumferential lip contact.

Medium to heavy duty Operating Conditions

Rod seal only Pressure

400 Bar
Good at low temperatures 6,000 Psi

Temperature
Excellent stability
-40° to 105°C
-40° to 221°F
Lower in friction
Speed
Easy to fit 0.8m /sec
2.5'/sec

Surface Finish µmRa

Ød ØD L
ØD
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º
Tolerances
C
Ød ØD L
f7 H10 - 0.0 + 0.2

Chamfer Radii
G/2 C/S 5.0 7.5 10.0 15.0 20 .0
C 2.5 4.0 5.0 7.5 10 .0
r 0.4 0.8 0.8 1.6 1.6
L r
Extrusion Gap - G
Pressure (Bar) 50 100 200 300 400 500
Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

11/2 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 3

RSLA
NR
Hydraulic

S E A L S

Design
Rod seals

RSLA asymmetrical single acting rod seal is made from

Polyurethane 94 Shore A and has two sealing lips on the
dynamic surface. The outside diameter is greater than the
nominal dimension for the housing and a fluid ring is moulded
between the primary and secondary sealing lips. This helps to
reduce the area of contact and consequently the friction and
stick slip phenomena. The second sealing lip also has the
function of keeping the entire packing in contact with the
static housing particularly when temperatures get so low they
cause contractions of the sealing ring. Both lips have precision
knife trimmed chamfers to provide complete circumferential lip
Key Features contact. In addition an anti-extrusion ring is present for added
protection against wide clearances and extreme pressures.

Higher pressures Operating Conditions

Shock load capability Pressure

400 Bar
Good at low temperatures 6,000 Psi

Temperature
Anti-extrusion ring
-40° to 105°C
-40° to 221°F
Twin lip design for stability
Speed
0.8m /sec
2.5'/sec

Surface Finish µmRa

Ød ØD L
ØD
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º
Tolerances
C
Ød ØD L
f7 H10 - 0.0 + 0.2

Chamfer Radii
G/2 C/S 5.0 7.5 10.0 15.0 20.0
C 2.5 4.0 5.0 7.5 10.0
r1 0.4 0.8 0.8 1.6 1.6
L r
Extrusion Gap - G
Pressure (Bar) 50 100 200 300 400 500
Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 11/3
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 4

RSS
NR
Hydraulic

S E A L S

Design
Rod seals

RSS are a symmetrical U-cup made from 94 Shore A

Polyurethane with a high modulus of elasticity and low
permanent deformation. Its excellent wear resistance offers
long service life in a wide range of applications. The
symmetrical configuration, with equal lip interference and
equal heal clearance on both the inside and outside
diameters, provides a seal which is capable for use in both
piston and rod applications. The sealing lips are knife
trimmed to eliminate all moulding flash and to provide
superior low pressure sealing performance.

Key Features
Medium to heavy duty Operating Conditions

Piston or rod Pressure

400 Bar
Symmetrical lip design 6,000 Psi

Temperature
Excellent wear resistance
-40° to 105°C
-40° to 221°F
Good extrusion resistance
Speed
Flexible to fit 0.8m /sec
2.5'/sec

Surface Finish µmRa

ØD Ød ØD L
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º

Tolerances
C
Ød ØD L
f7 H10 - 0 + 0.2

Chamfer Radii
G/2
C/S 5.0 7.5 10.0 15.0 20.0
C 2.5 4.0 5.0 7.5 10.0
L r r 0.4 0.8 0.8 1.6 1.6

Extrusion Gap - G
Pressure (Bar) 50 100 200 300 400 500
Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

11/4 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 5

MAD
NR
Hydraulic

S E A L S

Design
Rod seals

MAD are a symmetrical U-cup made from 95 Shore A

Polyurethane with a high modulus of elasticity and low
permanent deformation. Its excellent wear resistance offers
long service life in a wide range of applications. The
symmetrical configuration, with equal lip interference and
equal heal clearance on both the inside and outside
diameters, provides a seal which is capable for use in both
piston and rod applications. The sealing lips are knife
trimmed to eliminate all moulding flash and to provide
superior low pressure sealing performance.

Key Features
Medium to heavy duty Operating Conditions

Piston or rod Pressure

400 Bar
Symmetrical lip design 6,000 Psi

Temperature
Excellent wear resistance
-30° to 100°C
-22° to 212°F
Good extrusion resistance
Speed
Flexible to fit 0.8m/sec
2.5'/sec

Surface Finish µmRa

ØD Ød ØD L
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º

Tolerances
C
Ød ØD L
f7 H10 - 0.0 + 0.2

Chamfer Radii
G/2
C/S 5.0 7.5 10.0 15.0 20.0
C 2.5 4.0 5.0 7.5 10.0
L r r 0.4 0.8 0.8 1.6 1.6
Extrusion Gap - G
Pressure (Bar) 50 100 200 300 400 500
Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 11/5
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 6

TS
NR
Hydraulic

S E A L S

Design
Rod seals

TS symmetrical single acting rod seal is made from

Polyurethane 94 Shore A. The outside diameter is greater
than the nominal dimension for the housing and when
assembled the seal has an asymmetrical configuration. The
entire outer wall of the packing adheres to the static sealing
surface, whilst the area of contact with the rod is greatly
reduced, resulting in a concentration of the load. Both lips
have precision knife trimmed chamfers to provide complete
circumferential lip contact.

Key Features
Medium to heavy duty Operating Conditions

Piston or rod Pressure

400 Bar
Symmetrical lip design 6,000 Psi

Temperature
Excellent wear resistance
-40° to 105°C
-40° to 221°F
Good extrusion resistance
Speed
Flexible to fit 0.8m /sec
2.5'/sec

Surface Finish µmRa

Ød ØD L
ØD
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º
Tolerances
C
Ød ØD L
f7 H10 - 0.0 + 0.2

Chamfer Radii
G/2 C/S 5.0 7.5 10.0 15.0 20.0
C 2.5 4.0 5.0 7.5 10.0
r 0.4 0.8 0.8 1.6 1.6
L r
Extrusion Gap - G
Pressure (Bar) 50 100 200 300 400 500
Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

11/6 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 7

TSL
NR
Hydraulic

S E A L S

Design
Rod seals

TSL asymmetrical single acting rod seal is made from

Polyurethane 94 Shore A and has two sealing lips on the
dynamic surface. The outside diameter is greater than the
nominal dimension for the housing and a fluid ring is
moulded between the primary and secondary sealing lips.
This helps to reduce the area of contact and consequently
the friction and stick slip phenomena. The second sealing lip
also has the function of keeping the entire packing in contact
with the static housing particularly when temperatures get so
low they cause contractions of the sealing ring. Both lips
have precision knife trimmed chamfers to provide complete
Key Features circumferential lip contact.

Medium to heavy duty Operating Conditions

Rod seal only Pressure

400 Bar
Good at low temperatures 6,000 Psi

Temperature
Excellent stability
-40° to 105°C
-40° to 221°F
Lower in friction
Speed
Easy to fit 0.8m /sec
2.5'/sec

Surface Finish µmRa

Ød ØD L
ØD
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º
Tolerances
C
Ød ØD L
f7 H10 - 0.0 + 0.2

Chamfer Radii
G/2 C/S 5.0 7.5 10.0 15.0 20.0
C 2.5 4.0 5.0 7.5 10.0
r 0.4 0.8 0.8 1.6 1.6
L r
Extrusion Gap - G
Pressure (Bar) 50 100 200 300 400 500
Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 11/7
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 8

TSLA
NR
Hydraulic

S E A L S

Design
Rod seals

TSLA asymmetrical single acting rod seal is made from

Polyurethane 94 Shore A and has two sealing lips on the
dynamic surface. The outside diameter is greater than the
nominal dimension for the housing and a fluid ring is moulded
between the primary and secondary sealing lips. This helps to
reduce the area of contact and consequently the friction and
stick slip phenomena. The second sealing lip also has the
function of keeping the entire packing in contact with the static
housing particularly when temperatures get so low they cause
contractions of the sealing ring. Both lips have precision knife
trimmed chamfers to provide complete circumferential lip
Key Features contact. In addition an anti-extrusion ring is present for added
protection against wide clearances and extreme pressures.

Higher pressures Operating Conditions

Shock load capability Pressure

400 Bar
Good at low temperature 6,000 Psi

Temperature
Anti-extrusion ring
-40° to 105°C
-40° to 221°F
Twin lip design for stability
Speed
0.8m /sec
2.5'/sec

Surface Finish µmRa

Ød ØD L
ØD
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º
Tolerances
C
Ød ØD L
f7 H10 - 0.0 + 0.2

Chamfer Radii
G/2 C/S 5.0 7.5 10.0 15.0 20.0
C 2.5 4.0 5.0 7.5 10.0
r 0.4 0.8 0.8 1.6 1.6
L r
Extrusion Gap - G
Pressure (Bar) 50 100 200 300 400 500
Seal Only (mm) 1.20 0.80 0.40 0.25 0.17 0.10
Seal + BU (mm) n/a 1.10 0.80 0.70 0.60 0.50

Typical Examples
Reciprocating Rotary Oscillating Helix

11/8 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 9

CP
NR
Hydraulic

S E A L S

Design
Rod seals

CP are designed with a symmetrical profile for use as a single

acting piston or rod seal. The seal is a precision moulded
Nitrile rubber sealing element with a bonded fabric reinforced
base to resist extrusion. Manufactured with initial radial
interference to effect low pressure sealing, as pressures
increase the seal is energised thus increasing the sealing force.
Rubberised fabric has the advantage of retaining the sealing
media within its surfaces reducing friction and wear. The radial
grooves incorporated into the top of the seal on the pressure
side, ensure rapid energisation of the seal without excessive
end float and resultant wear.
Key Features
Medium to heavy duty Operating Conditions

Piston or rod Pressure

400 Bar
Tolerant of surface 6,000 Psi

imperfections Temperature
-30° to 100°C
Good service life -22° to 212°F

Speed
Good extrusion resistance
0.5m /sec
1.5'/sec

Surface Finish µmRa

Ød ØD L
ØD
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º
Tolerances
C
Ød ØD L
f8 js11 -0 + 0.25

Chamfer Radii
G/2 C/S 4.0 5.0 7.5 10.0
C 2.0 2.5 4.0 5.0
r 0.2 0.4 0.8 0.8
L r
Extrusion Gap - G
Pressure (Bar) 100 200 300 400
Seal Only (mm) 0.80 0.40 0.25 0.17
Seal + BU (mm) 1.10 0.80 0.70 0.60

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 11/9
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 10

CPI
NR
Hydraulic

S E A L S

Design
Rod seals

CPI are used as anti-extrusion single acting rod seals. This seal
is a precision moulded Nitrile rubber sealing element with a
fabric reinforced base and an Polyacetal support ring to resist
extrusion. The Polyacetal anti-extrusion ring allows larger
clearances and higher pressures. Designed with initial radial
interference to effect low pressure sealing, as pressures
increase the seal is progressively energised increasing sealing
force. Rubberised fabric has the advantage of retaining the
sealing media within its surfaces reducing friction and wear. The
radial grooves incorporated into the face of the seal on the
pressure side, ensure rapid energisation of the seal without
Key Features excessive end float and resultant wear.

Medium and heavy duty Operating Conditions

Higher pressure Pressure

400 Bar
Hard wearing 6,000 Psi

Temperature
Anti-extrusion ring
-30° to 100°C
-22° to 212°F
Tolerant of surface
Speed
imperfections
0.5m /sec
Excellent extrusion 1.5'/sec

resistance Surface Finish µmRa

Ød ØD L
ØD
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º
Tolerances
C
Ød ØD L
f8 Js11 -0 + 0.25

Chamfer Radii
G/2 C/S 6.0 7.5 10.0
C 3.0 4.0 5.0
r 0.4 0.4 0.4
L r
Extrusion Gap - G
Pressure (Bar) 100 200 300 400
Seal Only (mm) 0.80 0.60 0.47 0.40
Seal + BU (mm) 1.10 0.80 0.70 0.60

Typical Examples
Reciprocating Rotary Oscillating Helix

11/10 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 11

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

3.00 9.00 4.50 5.00 • 035011 003009-050

4.00 9.00 4.00 4.50  035015 004009-045

10.00 4.00 4.50 • 039015 004010-045

10.00 4.50 5.00 • 039015 004010-050

4.50 11.00 5.00 5.50 • 043017 004011-055

12.50 4.50 5.00 • 049017 004012-050

5.00 12.00 5.00 5.50 • 047019 005012-055

12.00 6.00 6.50 • 047019 005012-065

12.00 6.20 7.00 • 047019 005012-070

12.70 8.00 9.00 • 050019 005012-090

17.00 9.00 10.00 • 066019 005017-100

6.00 12.00 4.00 4.50 • 047023 006012-045

12.00 4.50 5.00 • 047023 006012-050

12.00 5.50 5.80  047023 006012-058

Rod Seals
12.00 5.50 6.00 • 047023 006012-060

Hydraulic
12.00 6.00 6.50 • 047023 006012-065

12.70 5.50 6.50 • 050023 006127-065

13.00 5.00 6.00  051023 006013-060

14.00 4.00 4.50  055024 006014-045

ISO 14.00 5.80 6.30 • 055024 006014-063

15.00 8.00 9.00 • 059024 006015-090

16.00 5.00 5.50  063024 006016-055

JIS 6.30 16.30 8.00 9.00 • UN 6.3 006016-090

7.00 14.00 3.50 4.20 • 055027 007014-042

15.00 4.00 4.50  059027 007015-045

15.00 7.00 8.00 • 059027 007015-080

JIS 7.10 17.10 8.00 9.00 • UN 7.1 007017-090

8.00 12.00 2.40 3.50 • 047031 008012-035

14.00 6.00 7.00 • 055031 008014-070

14.40 9.50 10.50  056031 008014-105

15.00 5.80 6.30 • • 059031 008015-063
15.00 8.00 9.00 • 059031 008015-090

ISO 16.00 5.80 6.30 • • 063031 008016-063

05/06 11/11
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 12

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

8.00 18.00 5.00 5.50 • 070031 008018-055

18.00 8.00 9.00 •  UN 8 008018-090

18.00 9.00 10.00 • 070031 008018-100

20.00 6.00 7.00  078031 008020-070

22.00 8.00 9.00 • 086031 008022-090

9.00 15.00 8.00 9.00 • 059035 009015-090

19.00 6.00 7.00 • 075035 009019-070

JIS 19.00 8.00 9.00 • UN 9 009019-090

10.00 16.00 4.80 5.40 • 063039 010016-054

16.00 6.00 6.50 • 063039 010016-065

17.00 5.80 6.40 • 066039 010017-064

18.00 5.50 6.00 • 070039 010018-060

ISO 18.00 5.80 6.30 • 070039 010018-063

18.00 6.00 7.00 • 070039 010018-070

18.00 8.00 9.00 • 070039 010018-090

ISO 20.00 7.20 8.00  078039 010020-080

20.00 8.00 9.00 •  078039 010020-090

22.00 6.00 7.00 • 086039 010022-070

22.00 8.00 9.00 • 086039 010022-090

11.00 17.00 4.40 5.00 • 066043 011017-050

20.50 6.00 7.00 • 080043 011020-070

11.20 19.20 5.00 6.00 • UHS 11.2 011019-060

JIS 21.20 8.00 9.00 • UN 11.2 011021-090

12.00 17.00 3.50 4.00  066047 012017-040

18.00 4.50 5.00  070047 012018-050

18.00 4.80 5.50 • 070047 012018-055

18.00 6.00 7.00 • 070047 012018-070

19.00 5.70 6.30 • 075047 012019-063

ISO 20.00 5.80 6.30 • 078047 012020-063

20.00 6.00 6.50 • 078047 012020-065

20.00 7.00 8.00 • 078047 012020-080

20.00 8.00 9.00 • 078047 012020-090

22.00 5.00 6.00 • 086047 012022-060

11/12 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 13

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

12.00 22.00 7.00 8.00 •  086047 012022-080

22.00 8.00 9.00 •  087047 012022-090

23.00 6.50 7.50 • 090047 012023-075

24.00 8.00 9.00 • 094047 012024-090

24.00 9.00 10.00 • 094047 012024-100

25.00 8.00 9.00 • 098047 012025-090

25.00 10.00 11.00 • 098047 012025-110

JIS 12.50 22.50 8.00 9.00 • UN 12.5 012022-090A

24.00 5.00 6.00 • 094049 012024-060

14.00 20.00 4.00 5.00 • 078055 014020-050

20.00 4.80 5.30 • • 078055 014020-053

22.00 3.90 4.50 • 086055 014022-045

JIS 22.00 5.00 5.70 •  UHS 14 014022-057

ISO 22.00 5.80 6.30 • 086055 014022-063

Rod Seals
•

Hydraulic
22.00 6.00 7.00 086055 014022-070
22.00 8.00 9.00 • 086055 014022-090

22.00 11.00 12.00 • 086055 014022-120

ISO 24.00 7.20 8.00 • 094055 014024-080

24.00 8.00 9.00 •  094055 014024-090

25.00 5.50 6.50 • 098055 014025-065

30.00 5.00 6.00 • 118055 014030-060

15.00 21.50 4.20 5.00 • 084059 015021-050

23.00 5.80 6.30  • 090059 015023-063

25.00 8.00 9.00 •  098059 015025-090

25.00 10.00 11.00 • 098059 015025-110

26.00 7.00 8.00 • 102059 015026-080

27.00 6.00 7.00 • 106059 015027-070

28.00 10.00 11.00 • 110059 015028-110

15.40 25.50 6.50 7.40 • 100060 015025-074

16.00 20.60 3.30 3.60  081063 016020-036

22.00 4.00 4.50 •  086063 016022-045

22.00 4.50 5.00 • 086063 016022-050

22.00 5.00 5.50 •  086063 016022-055

05/06 11/13
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 14

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

JIS 16.00 24.00 5.00 5.70 •  UHS 16 016024-057

ISO 24.00 5.80 6.30 • • 094063 016024-063

24.00 6.50 7.00 • • • 094063 016024-070

24.00 9.00 10.00 • 094063 016024-100

26.00 5.00 6.00 •  102063 016026-060

ISO 26.00 7.20 8.00  102063 016026-080

26.00 8.00 9.00 •  102063 016026-090

26.00 9.00 10.00  102063 016026-100

26.00 10.00 11.00 • 102063 016026-110

28.00 6.00 7.00 • 110063 016028-070

32.00 8.00 9.00 • 125063 016032-090

16.75 26.00 5.80 6.30 • 102063 016026-063

17.00 25.00 4.00 4.50  098066 017025-045

25.00 10.00 11.00 • 098066 017025-110

18.00 24.00 4.70 5.20  094070 018024-052

25.00 5.00 5.50 • 098070 018025-055

25.00 5.00 5.70 • 098070 018025-057

25.00 6.50 7.00 • 098070 018025-070

JIS 26.00 5.00 5.70 • UHS 18 018026-057

ISO 26.00 5.80 6.30 • • 102070 018026-063

26.00 6.30 7.00 • 102070 018026-070

26.00 6.50 7.50 • 102070 018026-075

26.00 8.00 9.00 • • • 102070 018026-090

26.00 8.50 9.50 • 102070 018026-095

28.00 5.80 6.30 • • • 110070 018028-063

ISO 28.00 7.00 8.00 • 110070 018028-080

28.00 8.00 9.00 •  110070 018028-090

30.00 8.00 9.00 • 118070 018030-090

34.00 8.00 9.00 • 133070 018034-090

19.00 25.00 6.00 7.00 • 098075 019025-070

29.00 6.00 8.50 • 114074 019029-085

19.50 27.50 8.00 9.00 • 108076 019027-090

20.00 25.00 3.00 3.50  098078 020025-035

11/14 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 15

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

20.00 25.00 3.70 4.50  098078 020025-045

26.00 5.20 6.00 • 102078 020026-060

27.00 6.00 6.40 • • 106078 020027-064

27.00 5.70 6.50 • 106078 020027-065

28.00 4.00 5.00 • 110078 020028-050

JIS 28.00 5.00 5.70 •  UHS 20 020028-057

ISO 28.00 5.80 6.30 • • • 110078 020028-063

28.00 6.50 7.00 •  • 110078 020028-070

28.00 7.00 8.00 • 110078 020028-080

28.00 8.00 9.00 • 110078 020028-090

29.00 5.00 5.50 • 114078 020029-055

30.00 4.50 5.00 • 118078 020030-050

ISO 30.00 7.50 8.00 • • 118078 020030-080

30.00 8.00 8.50 • 118078 020030-085

Rod Seals
• 

Hydraulic
JIS 30.00 8.00 9.00 118078 020030-090
30.00 10.00 11.00 •  118078 020030-110

32.00 7.50 8.50 • 125078 020032-085

35.00 10.00 11.00  137078 020035-110

35.00 12.00 13.00 • 137078 020035-130

37.00 12.00 13.00 • 145078 020037-130

39.00 10.00 11.00 • 153078 020039-110

40.00 10.00 11.00 • 157078 020040-110

40.00 11.00 12.00 • 157078 020040-120

40.00 12.00 13.00 • 157078 020040-130

21.00 27.00 4.50 5.00  106082 021027-050

22.00 28.00 4.50 5.50  110086 022028-055

28.00 8.00 9.00 • 110086 022028-090

29.00 5.00 5.60  114086 022029-056

ISO 30.00 5.80 6.30 • 118086 022030-063

30.00 6.50 7.00 • • • 118086 022030-070

30.00 6.50 7.50 • 118086 022030-075

30.00 7.00 8.00  • 118086 022030-080

30.00 8.00 9.00  118086 022030-090

05/06 11/15
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 16

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

22.00 30.00 10.00 11.00 • 118086 022030-110

32.00 5.00 5.50  125086 022032-055

32.00 7.00 8.00 • • 125086 022032-080

32.00 8.00 9.00 • • 125086 022032-090

32.00 9.00 10.00  125086 022032-100

32.00 10.00 11.00 •  125086 022032-110

34.00 9.00 9.50 • 133086 022034-095

35.00 6.00 7.00  137086 022035-070

JIS 35.00 10.00 11.00 • 137086 022035-110

36.00 8.00 9.00 • 141086 022036-090

40.00 10.00 11.00 • 157086 022040-110

JIS 22.40 30.00 5.00 5.70 •  UHS 22.4 022030-057

JIS 32.40 8.00 9.00 • UN 22.4 022032-090A

23.00 30.00 6.50 7.50 • 118090 023030-075

35.00 10.00 11.00  137090 023035-110

JIS 23.50 31.50 5.00 6.00 • UHS 23.5 023031-060

24.00 30.00 4.50 5.00  118094 024030-050

32.00 6.00 6.50  125094 024032-065

32.00 7.00 7.50 • 125094 024032-075

32.00 7.00 8.00 • 125094 024032-080

34.00 5.70 6.50 • 133094 024034-065

34.00 7.20 8.00  133094 024034-080

34.00 8.50 9.50  133094 024034-095

40.00 8.00 9.00 • 157094 024040-090

25.00 32.00 4.00 5.00  125098 025032-050

JIS 33.00 2.00 2.00 • 025033-020

33.00 4.00 4.50 • 129098 025033-045

JIS 33.00 5.00 5.70 •  UHS 25 025033-057

ISO 33.00 5.80 6.30 • • • 129098 025033-063

33.00 6.00 7.00 • 129098 025033-070

33.00 6.50 7.50 • • 129098 025033-075

33.00 7.00 8.00 • 129098 025033-080

33.00 8.00 9.00 • 129098 025033-090

11/16 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 17

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

25.00 33.00 10.00 11.00  129098 025033-110

JIS 35.00 2.00 2.00 • 025035-020

35.00 5.00 5.50 • 137098 025035-055

35.00 5.00 6.00  137098 025035-060

35.00 5.80 6.30 • 137098 025035-063

ISO 35.00 7.50 8.00 • • 137098 025035-080

35.00 8.50 9.00 • • • • 137098 025035-090

35.00 9.00 10.00  137098 025035-100

35.00 10.00 11.00 •  137098 025035-110

36.00 5.00 6.00 • • 141098 025036-060

37.00 9.00 10.00  145098 025037-100

38.00 9.00 10.00  • 149098 025038-100

38.00 10.00 11.00 •  149098 025038-110

40.00 10.00 11.00 •  157098 025040-110

Rod Seals
•

Hydraulic
40.00 12.00 13.00 157098 025040-130
45.00 10.00 11.00 • 177098 025045-110

26.00 40.00 9.50 10.00 • • 157102 026040-100

27.00 35.00 6.00 6.50 • 137106 027035-065

28.00 34.20 5.20 6.00 • 134110 028034-060

35.00 5.00 5.50 • 137110 028035-055

JIS 35.50 3.00 3.00 • 0280355-03

JIS 35.50 5.00 5.70 •  UHS 28 028035-057

36.00 5.80 6.30 • • • 141110 028036-063

36.00 6.50 7.50 • 141110 028036-075

36.00 8.00 9.00  141110 028036-090

ISO 38.00 5.80 6.30 • 149110 028038-063

ISO 38.00 7.00 8.00 • 149110 028038-080

38.00 8.00 8.50 • • 149110 028038-085

38.00 8.00 9.00 •  149110 028038-090

38.00 10.00 11.00  149110 028038-110

40.00 6.00 6.50  157110 028040-065

40.00 7.00 8.00  157110 028040-080

40.00 8.50 9.00 • • 157110 028040-090

05/06 11/17
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 18

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

28.00 40.00 9.00 9.50  • 157110 028040-095

40.00 10.00 11.00 •  157110 028040-110

43.00 9.00 10.00 • 169110 028043-100

JIS 43.00 10.00 11.00 • UN 28 028043-110

ISO 43.00 11.50 12.50  169110 028043-125

29.00 35.00 5.60 6.30  137114 029035-063

30.00 37.00 6.00 7.00 •  145118 030037-070

37.50 6.00 6.50 • 147118 030037-065

38.00 4.00 4.50 • 149118 030038-045

38.00 5.80 6.30 • • • • 149118 030038-063

38.00 6.00 6.50 • 149118 030038-065

38.00 7.00 8.00 • • 149118 030038-080

38.00 8.00 8.50 • 148118 030038-085

38.00 8.00 9.00  149118 030038-090

JIS 40.00 3.00 3.00 • 030040-030

40.00 5.00 5.50 • 157118 030040-055

40.00 5.70 6.30  157118 030040-063

JIS 40.00 6.00 7.00 •  UHS 30 030040-070

40.00 7.00 7.50 • • 157118 030040-075

40.00 7.30 8.00 • 157118 030040-080

40.00 9.50 10.50  157118 030040-105

40.00 10.00 11.00 • • 157118 030040-110

42.00 9.00 10.00 • 165118 030042-100

42.00 10.00 11.00 • 165118 030042-110

43.00 9.00 10.00  169118 030043-100

45.00 8.50 9.00  • • 177118 030045-090

JIS 45.00 9.00 10.00 •  177118 030045-100

JIS 45.00 10.00 11.00 •  177118 030045-110

50.00 10.00 11.00 • 196118 030050-110

50.00 12.00 13.00 • 196118 030050-130

50.00 14.00 14.50 • 196118 030050-145

JIS 31.50 41.50 6.00 7.00 •  UHS 31.5 031041-070

JIS 46.50 10.00 11.00 • UN 31.5 031046-110

11/18 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 19

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

32.00 40.00 5.50 6.00 • 157125 032040-060

40.00 5.80 6.30 • 157125 032040-063

40.00 5.80 6.40 • 157125 032040-064

40.00 6.70 7.70 • 157125 032040-077

40.00 8.50 9.00 • • • 157125 032040-090

41.50 8.00 8.90 • 163125 032041-089

JIS 42.00 6.00 7.00 •  UHS 32 032042-070

ISO 42.00 7.00 8.00 • • 165125 032042-080

42.00 10.00 11.00 • • 165125 032042-110

42.53 8.00 9.00 • 167125 032042-090

44.00 6.00 6.50  173125 032044-065

44.00 11.50 12.00 • 173125 032044-120

45.00 9.50 10.00 • 177125 032045-100

45.00 9.50 10.50 • 177125 032045-105

Rod Seals
•

Hydraulic
45.00 10.00 11.00 177125 032045-110
47.00 9.00 10.00 • 185125 032047-100

47.00 10.00 11.00 •  185125 032047-110

48.00 10.00 11.00   188125 032048-110

50.00 10.00 11.00  196125 032050-110

50.00 12.00 13.00 • 196125 032050-130

33.00 42.70 7.50 8.50 • 168129 033042-085

42.70 8.50 9.50 • 168129 033042-095

43.00 10.00 11.00  169129 033043-110

34.00 45.00 7.00 8.00 • 177133 034045-080

45.00 9.00 10.00 • 177133 034045-100

JIS 50.00 12.00 13.00 •  196133 034050-130

50.00 14.00 15.00 • 196133 034050-150

74.00 10.00 11.00 • 291133 034074-110

35.00 43.00 5.80 6.40 • • 169137 035043-064

43.00 6.00 7.00 • 169137 035043-070

43.00 7.20 8.00 • 169137 035043-080

43.00 8.00 9.00 • 169137 035043-090

44.00 7.00 8.00 • 173137 035044-080

05/06 11/19
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 20

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

JIS 35.00 45.00 3.00 3.00 • 035045-030

45.00 5.00 5.50  177137 035045-055

45.00 6.00 7.00 •  • UHS 35 035045-070

45.00 7.00 8.00 • 177137 035045-080

45.00 8.00 9.00 • 177137 035045-090

45.00 10.00 10.50 • 177137 035045-105

45.00 10.00 11.00 • • 177137 035045-110

45.00 12.50 13.50 • 177137 035045-135

46.00 8.00 9.00  181137 035046-090

46.00 9.00 10.00  181137 035046-100

47.00 8.00 9.00  185137 035047-090

48.00 10.00 11.00 • 188137 035048-110

JIS 50.00 9.00 10.00 •  196137 035050-100

50.00 10.00 11.00 • • • • 196137 035050-110

50.00 11.00 11.50 • 196137 035050-115

55.00 10.00 11.00 • 216137 035055-110

55.00 12.00 13.00 •  216137 035055-130

JIS 35.50 45.00 6.00 7.00 •  UHS 35.5 035045-070A

JIS 50.50 10.00 11.00 • UN 35.5 035050-110A

36.00 44.00 5.80 6.30 • • 173141 036044-063

44.00 6.30 7.00 • 173141 036044-070

44.00 8.00 9.00  173141 036044-090

46.00 5.00 5.50  181141 036046-055

ISO 46.00 7.00 8.00 • • 181141 036046-080

46.00 8.00 8.50 • • 181141 036046-085

46.00 10.00 11.00  181141 036046-110

48.00 7.00 8.00  188141 036048-080

48.00 8.00 9.00 •  188141 036048-090

48.00 9.00 9.50 • 188141 036048-095

51.00 10.00 11.00  200141 036051-110

ISO 51.00 11.50 12.50  200141 036051-125

57.00 5.00 6.00 • 224141 036057-060

70.00 10.00 11.00 • 275141 036070-110

11/20 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 21

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

37.00 45.00 5.70 6.30  177145 037045-063

38.00 44.50 4.70 5.30  175149 038044-053

45.00 5.00 5.50 •  177149 038045-055

45.00 6.00 7.00 • 177149 038045-070

46.00 4.00 4.50 • 181149 038046-045

46.00 6.50 7.50 • 181149 038046-075

48.00 5.00 5.50  188149 038048-055

JIS 48.00 6.00 7.00 •  UHS 38 038048-070

48.00 7.00 8.00 • 188149 038048-080

50.00 5.50 6.50  196149 038050-065

50.00 8.50 9.50 • 196149 038050-095

50.00 9.00 10.00 • 196149 038050-100

50.00 10.00 11.00  196149 038050-110

55.00 10.00 11.00 • 216149 038055-110

Rod Seals
•

Hydraulic
58.00 10.00 11.00 228149 038058-110
40.00 48.00 5.80 6.30 • 188157 040048-063

48.00 6.00 6.50  • 188157 040048-065

48.00 8.00 9.00 • 188157 040048-090

48.00 11.00 12.00 • 188157 040048-120

49.52 9.50 10.50 • 194157 040049-105

JIS 50.00 3.00 3.00 • 040050-030

50.00 5.80 6.30 • 196157 040050-063

JIS 50.00 6.00 7.00 •   UHS 40 040050-070

50.00 6.50 7.50 • 196157 040050-075

ISO 50.00 7.50 8.00 • • • • 196157 040050-080

50.00 8.00 9.00 •  196157 040050-090

50.00 9.00 10.00  196157 040050-100

50.00 10.00 10.50 • 196157 040050-105

50.00 10.00 11.00 • • 196157 040050-110

50.00 12.50 13.50  196157 040050-135

50.00 17.00 18.00 • 196157 040050-180

52.00 8.00 9.00 •  204157 040052-090

52.00 9.00 10.00  204157 040052-100

05/06 11/21
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 22

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

40.00 52.00 10.00 11.00 • 204157 040052-110

52.00 17.00 18.00 • 204157 040052-180

JIS 55.00 3.00 3.00 • 040055-030

55.00 7.50 8.00 • 216157 040055-080

55.00 7.50 8.50 • 216157 040055-085

JIS 55.00 9.00 10.00  216157 040055-100

55.00 9.50 10.50 • 216157 040055-105

JIS 55.00 10.00 11.00 •  • UN 40 040055-110

ISO 55.00 11.50 12.50  216157 040055-125

56.00 10.00 11.00 •  220157 040056-110

60.00 10.00 11.00 • • 236157 040060-110

60.00 12.00 13.00  236157 040060-130

60.00 13.00 14.00 • 236157 040060-140

60.00 14.00 14.50 • • 236157 040060-145

60.00 18.00 19.00 • 236157 040060-190

62.00 15.00 16.00 • 244157 040062-160

65.00 12.00 13.00 • 255157 040065-130

70.00 15.00 16.00 • 275157 040070-160

70.00 24.00 26.00 • 275157 040070-260

75.00 10.00 11.00 • 295157 040075-110

42.00 50.00 6.00 6.30 • 196165 042050-063

50.00 5.50 6.50 • 196165 042050-065

50.00 8.00 9.00 • 196165 042050-090

50.00 11.50 12.50 • 196165 042050-125

51.00 10.00 11.00  200165 042051-110

52.00 6.00 7.00 • 204165 042052-070

52.00 8.00 9.00 • 204165 042052-090

52.00 9.00 10.00 • 204165 042052-100

53.00 9.00 10.00 • 208165 042053-100

62.00 10.00 11.00  244165 042062-110

62.00 12.00 13.00 •  244165 042062-130

43.00 53.00 7.00 8.00  208169 043053-080

44.00 54.00 5.00 5.50  212173 044054-055

11/22 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 23

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

44.00 60.00 12.00 13.00 • 236173 044060-130

45.00 52.00 13.00 14.00  204177 045052-140

52.50 9.00 10.00 • 206177 045052-100

53.00 5.80 6.30 • 208177 045053-063

53.00 6.00 7.00  208177 045053-070

53.00 6.50 7.50 • 208177 045053-075

53.00 8.00 9.00 • 208177 045053-090

53.00 9.50 10.50 • 208177 045053-105

53.00 10.00 11.00  208177 045053-110

53.00 11.50 12.50 • 208177 045053-125

53.00 12.00 13.00  208177 045053-130

JIS 55.00 3.00 3.00 • 045055-030

55.00 5.80 6.30 • 216177 045055-063

JIS 55.00 6.00 7.00 •  UHS 45A 045055-070

Rod Seals
• •

Hydraulic
55.00 6.50 7.50 216177 045055-075
ISO 55.00 7.50 8.00 • • • 216177 045055-080

55.00 10.00 11.00 • • • 216177 045055-110

55.00 11.50 12.50 • 216177 045055-125

JIS 56.00 2.50 2.50 • 045056-025

JIS 56.00 7.00 8.00 •  UHS 45 045056-080

57.00 6.00 6.50  224177 045057-065

57.00 9.00 10.00  • 224177 045057-100

57.70 9.50 10.50 • 227177 045057-105

58.00 9.00 10.00  228177 045058-100

JIS 60.00 3.00 3.00 • 045060-030

JIS 60.00 9.50 10.00  236177 045060-100

JIS 60.00 10.00 11.00 •  • UN 45 045060-110

60.00 11.00 11.50 • 236177 045060-115

ISO 60.00 11.50 12.50  236177 045060-125

63.00 10.00 11.00 • 248177 045063-110

65.00 10.00 11.00 •  255177 045065-110

65.00 12.00 13.00 •  255177 045065-130

65.00 14.00 14.50  • • 255177 045065-145

05/06 11/23
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 24

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

46.00 54.00 8.00 9.00 • 212181 046054-090

56.00 7.20 8.00  220181 046056-080

48.00 56.00 11.50 12.50 • 220188 048056-125

56.00 12.00 13.00 • 220188 048056-130

58.00 10.00 11.00 • 228188 048058-110

60.00 6.00 7.00 • 236188 048060-070

60.00 9.00 10.00  236188 048060-100

JIS 63.00 3.00 3.00 • 048063-030

JIS 63.00 10.00 11.00 • UN 48 048063-110

49.50 65.30 10.00 11.00 • 257194 049065-110

50.00 57.00 10.00 11.00 • 224196 050057-110

58.00 5.00 5.50  228196 050058-055

58.00 8.00 8.50 • 228196 050058-085

58.00 8.00 9.00 • 228196 050058-090

58.00 11.50 12.50 • 228196 050058-125

59.00 10.00 11.00  232196 050059-110

JIS 60.00 3.00 3.00 • 050060-030

60.00 5.00 5.50  236196 050060-055

JIS 60.00 6.00 7.00 •  UHS 50 050060-070

ISO 60.00 7.50 8.00   • • 236196 050060-080

60.00 9.50 10.00 • • 236196 050060-100

60.00 10.00 11.00 • • 236196 050060-110

60.00 11.00 12.00 • 236196 050060-120

60.00 12.00 13.00  236196 050060-130

62.00 8.00 9.00 • 244196 050062-090

62.00 9.00 10.00 •  244196 050062-100

62.00 10.00 11.00 • 244196 050062-110

62.70 9.50 10.50 • 246196 050062-105

63.00 6.00 7.00 • 248196 050063-070

JIS 63.00 8.00 9.00  248196 050063-090

63.00 10.00 11.00  248196 050063-110

JIS 65.00 3.00 3.00 • 050065-030

JIS 65.00 9.00 10.00  255196 050065-100

11/24 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 25

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

50.00 65.00 10.00 11.00 •  • • UN 50 050065-110

65.00 11.00 12.00 • • 255196 050065-120

ISO 65.00 11.50 12.50 • 255196 050065-125

65.00 15.50 16.50 • 255196 050065-165

68.00 9.00 10.00  267196 050068-100

JIS 70.00 3.00 3.00 • 050070-030

70.00 10.00 11.00 •  275196 050070-110

JIS 70.00 12.00 13.00 • • 275196 050070-130

70.00 13.50 14.50  • • 275196 050070-145

70.00 14.00 15.00 • 275196 050070-150

70.00 18.00 19.00 • 275196 050070-190

72.00 12.00 13.00 • 283196 050072-130

52.00 62.00 12.00 13.00 • 244204 052062-130

53.00 63.00 5.00 5.50  248208 053063-055

Rod Seals
• 

Hydraulic
JIS 63.00 6.00 7.00 UHS 53 053063-070
63.00 6.50 7.50 • 248208 053063-075

JIS 73.00 12.00 13.00 • UN 53 053073-130

54.00 70.00 12.00 13.00  275212 054070-130

55.00 62.50 9.00 10.00 • 246216 055062-100

63.00 8.00 9.00 • 248216 055063-090

63.00 11.50 12.50 • 248216 055063-125

63.00 12.00 13.00  248216 055063-130

JIS 65.00 3.00 3.00 • 055065-030

JIS 65.00 6.00 7.00 •  UHS 55 055065-070

65.00 7.50 8.00 • • • 255216 055065-080

65.00 8.50 9.50 • 255216 055065-095

65.00 10.50 11.00 • • • • 255216 055065-110

65.00 12.00 13.00 • • 255216 055065-130

65.00 13.50 14.50  255216 055065-145

67.00 10.00 11.00  263216 055067-110

JIS 68.00 10.00 11.00  267216 055068-110

JIS 70.00 3.00 3.00 • 055070-030

JIS 70.00 9.00 10.00  275216 055070-100

05/06 11/25
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 26

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

55.00 70.00 10.00 10.50 • • 275216 055070-105

70.00 10.00 11.00 •  275216 055070-110

70.00 12.00 13.00 •  275216 055070-130

JIS 75.00 3.00 3.00 • 055075-030

75.00 10.00 11.00 • 295216 055075-110

JIS 75.00 12.00 13.00 •  UN 55 055075-130

75.00 14.00 14.50  • 295216 055075-145

80.00 12.00 13.00 • 314216 055080-130

JIS 56.00 66.00 6.00 7.00 •  UHS 56 056066-070

66.00 6.50 7.50 • 259220 056066-075

66.00 10.00 11.00 • 259220 056066-110

71.00 10.00 10.50 • 279220 056071-105

71.00 10.00 11.00  279220 056071-110

ISO 71.00 11.50 12.50 • • 279220 056071-125

JIS 76.00 12.00 13.00  UN 56 056076-130

76.00 14.00 14.50  • 299220 056076-145

ISO 76.00 15.00 16.00  299220 056076-160

JIS 58.00 68.00 6.00 7.00 • UHS 58 058068-070

68.00 11.50 12.50 • 267228 058068-125

78.00 15.00 16.00 • 307228 058078-160

59.50 67.00 9.00 10.00 • 263263 059067-100

60.00 68.00 6.30 7.30 • 268236 060068-073

68.00 8.00 9.00 • 267236 060068-090

68.00 11.50 12.50 • 267236 060068-125

68.00 13.00 14.00  267236 060068-140

69.00 10.00 11.00  271236 060069-110

69.30 5.50 6.30 • 236272 060069-063

JIS 70.00 3.00 3.00 • 060070-030

70.00 5.00 5.50  275236 060070-055

JIS 70.00 6.00 7.00 •  UHS 60A 060070-070

70.00 7.50 8.00 • • • 275236 060070-080

70.00 8.00 9.00 • 275236 060070-090

70.00 10.00 11.00 • • • 275236 060070-110

11/26 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 27

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

60.00 70.00 11.50 12.50 • • 275236 060070-125

70.00 12.50 13.00 • • • • • 275236 060070-130

70.00 12.50 13.50 • 275236 060070-135

70.00 14.30 15.00 • 275236 060070-150

JIS 71.00 7.00 8.00 • UHS 60 060071-080

71.00 8.00 9.00 • 279236 060071-090

72.00 8.00 9.00  283236 060072-090

72.00 9.50 10.00 • • 283236 060072-100

JIS 73.00 3.00 3.00 • 060073-030

73.00 10.00 11.00  287236 060073-110

JIS 75.00 3.00 3.00 • 060075-030

JIS 75.00 9.00 10.00  295236 060075-100

75.00 10.00 11.00 • • 295236 060075-110

75.00 12.00 13.00 • • 295236 060075-130

Rod Seals
•

Hydraulic
75.00 15.50 16.50 295236 060075-165
JIS 76.00 12.00 13.00  299236 060076-130

77.00 11.00 12.00  303236 060077-120

JIS 80.00 3.00 3.00 • 060080-030

80.00 10.00 11.00 • 314236 060080-110

JIS 80.00 12.00 13.00 • • UN 60 060080-130

80.00 14.00 14.50  • 314236 060080-145

80.00 18.00 19.00 • 314236 060080-190

85.00 12.50 13.50 • 334236 060085-135

90.00 15.00 16.00 • 354236 060090-160

61.00 69.00 8.00 8.50  • 271240 061069-085

69.00 8.00 9.00 • 271240 061069-090

69.70 8.00 9.00 • 274240 061697-090

62.00 74.00 13.00 14.00  291244 062074-140

63.00 71.00 8.00 9.00  279248 063071-090

JIS 73.00 6.00 7.00 •  UHS 63 063073-070

73.00 7.00 8.00  287248 063073-080

73.00 10.00 11.00  287248 063073-110

73.00 12.00 13.00  287248 063073-130

05/06 11/27
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 28

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

63.00 75.00 8.50 9.50 • 295248 063075-095

75.00 9.00 9.60  • 295248 063075-096

75.00 10.00 11.00 • • • 295248 063075-110

75.00 12.00 13.00 • 295248 063075-130

78.00 10.00 11.00 •  307248 063078-110

ISO 78.00 11.50 12.50 • 307248 063078-125

78.00 12.00 13.00  307248 063078-130

78.00 12.50 13.50 • 307248 063078-135

JIS 83.00 12.00 13.00 • UN 63 063083-130

83.00 13.50 14.50 • 326248 063083-145

ISO 83.00 15.00 16.00 •  326248 063083-160

64.00 80.00 12.00 13.00  314251 064080-130

65.00 73.00 8.00 9.00 • 287255 065073-090

73.00 11.50 12.50 • 287255 065073-125

JIS 75.00 3.00 3.00 • 065075-030

JIS 75.00 6.00 7.00 •  UHS 65 065075-070

75.00 10.00 11.00 • 295255 065075-110

75.00 12.00 13.00 • • • 295255 065075-130

75.00 13.00 13.50 • • 295255 065075-135

75.00 13.50 14.50  295255 065075-145

77.00 8.50 9.50 • 303255 065077-095

77.00 9.00 9.60 • 303255 065077-096

77.00 9.00 10.00  303255 065077-100

77.70 9.50 10.50 • 305255 065077-105

JIS 78.00 3.00 3.00 • 065078-030

JIS 78.00 10.00 11.00  IDI 65 065078-110

79.20 11.50 12.50 • 311255 065079-125

JIS 80.00 3.00 3.00 • 065080-030

JIS 80.00 9.00 10.00  334255 065080-100

80.00 10.00 11.00  314255 065080-110

80.00 11.00 11.50 • 314255 065080-115

80.00 11.00 12.00 • 314255 065080-120

80.00 12.00 12.50 • • 314255 065080-125

11/28 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 29

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

65.00 80.00 12.00 13.00 •  314255 065080-130

JIS 85.00 3.00 3.00 • 065085-030

85.00 10.00 11.00 • 334255 065085-110

85.00 11.50 12.50 • 334255 065085-125

JIS 85.00 12.00 13.00 •  UN 65 065085-130

85.00 13.50 14.50  334255 065085-145

90.00 19.00 20.00  354255 065090-200

66.00 76.00 8.00 9.00 • 299259 066076-090

80.00 10.00 11.00 • • 314259 066080-110

80.00 13.00 14.00 • 314259 066080-140

82.00 12.00 13.00  322259 066082-130

67.00 75.00 11.50 12.50 • 295263 067075-125

77.00 6.00 7.00 •  UHS 67 067077-070

77.00 10.00 11.00 • 303263 067077-110

Rod Seals
•

Hydraulic
77.00 12.00 13.00 303263 067077-130
JIS 87.00 12.00 13.00 • UN 67 067087-130

68.00 76.00 8.00 9.00 • 299267 068076-090

80.00 9.00 10.00  314267 068080-100

70.00 76.00 5.50 6.00 • 299275 070076-060

77.50 9.00 10.00 • 305275 070077-100

78.00 8.00 9.00 • 307275 070078-090

78.00 11.50 12.50 • 307275 070078-125

79.00 13.00 14.00 • 311275 070079-140

JIS 80.00 3.00 3.00 • 070080-030

80.00 5.50 6.00 • 314275 070080-060

80.00 6.00 6.50  314275 070080-065

JIS 80.00 6.00 7.00 •  UHS 70 070080-070

80.00 6.50 7.50  314275 070080-075

80.00 7.00 8.00 •  • 314275 070080-080

80.00 8.00 9.00 • 314275 070080-090

80.00 10.00 11.00 • • 314275 070080-110

80.00 11.50 12.50 • 314275 070080-125

80.00 12.00 13.00 • • 314275 070080-130

05/06 11/29
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 30

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

70.00 82.00 9.00 9.60 • 322275 070082-096

82.00 9.00 10.00 • 322275 070082-100

JIS 83.00 3.00 3.00 • 070083-030

JIS 83.00 10.00 11.00  326275 070083-110

84.00 12.00 12.50 • 330275 070084-125

JIS 85.00 3.00 3.00 • 070085-030

JIS 85.00 9.00 10.00  334275 070085-100

85.00 10.00 11.00 •  334275 070085-110

85.00 11.50 12.00 • • • 334275 070085-120

ISO 85.00 11.50 12.50 • • 334275 070085-125

85.00 12.00 13.00 • • 334275 070085-130

JIS 90.00 3.00 3.00 • 070090-030

90.00 10.00 11.00 • 354275 070090-110

JIS 90.00 12.00 13.00 • • UN 70 070090-130

90.00 14.00 14.50 • • • 354275 070090-145

ISO 90.00 15.00 16.00  354275 070090-160

90.00 18.00 19.00 • 354275 070090-190

95.00 12.00 13.00 • 374275 070095-130

JIS 71.00 80.00 6.00 7.00 • UHS 71 071080-070

JIS 91.00 12.00 13.00 • UN 71 071091-130

72.00 78.00 6.00 7.00  307283 072078-070

73.00 82.40 7.00 8.00 • 324287 073082-080

74.50 82.00 9.00 10.00 • 322293 074082-100

75.00 83.00 6.30 7.30 • 326275 075083-073

83.00 8.00 9.00 • 326295 075083-090

83.00 11.50 12.50 • 326295 075083-125

JIS 85.00 3.00 3.00 • 075085-030

JIS 85.00 6.00 7.00 •  UHS 75 075085-070

85.00 7.00 8.00 • 334295 075085-080

85.00 8.70 9.50 • 334295 075085-095

85.00 10.00 11.00 • • 334295 075085-110

85.00 11.50 12.50 • 334295 075085-125

85.00 12.00 13.00 • • 334295 075085-130

11/30 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 31

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

75.00 87.00 9.00 9.60  342295 075087-096

JIS 88.00 3.00 3.00 • 075088-030

JIS 88.00 10.00 11.00  346295 075088-110

JIS 90.00 3.00 3.00 • 075090-030

90.00 7.00 8.00  354295 075090-080

90.00 7.50 8.50 • 354295 075090-085

JIS 90.00 9.00 10.00  354295 075090-100

90.00 10.00 11.00 •  354295 075090-110

90.00 11.00 11.50 • • 354295 075090-115

90.00 11.40 12.50 • 354295 075090-125

90.00 12.00 13.00 • • 354295 075090-130

JIS 95.00 3.00 3.00 • 075095-030

JIS 95.00 12.00 13.00 •  UN 75 075095-130

95.00 14.00 14.50 • • • 374295 075095-145

Rod Seals


Hydraulic
76.00 84.00 7.50 8.50 330299 076084-085
84.00 8.00 9.00  • 330299 076084-090

92.00 12.00 13.00  362300 076092-130

76.50 96.50 12.00 13.00 • 379301 076096-130

77.00 86.00 14.00 15.00 • 338303 077086-150

78.00 86.00 8.00 9.00 • 338307 078086-090

86.00 11.50 12.50 • 338307 078086-125

86.00 13.00 14.00  338307 078086-140

86.00 13.50 14.50 • 338307 078086-145

88.00 12.00 13.00 • 346307 078088-130

88.00 14.30 15.00 • 346307 078088-150

90.00 9.00 10.00  354307 078090-100

90.00 12.00 13.00 • 354307 078090-130

93.00 10.50 11.50 •  366307 078093-115

79.00 87.70 8.00 9.00 • 345311 079087-090

80.00 88.00 9.00 10.00 • 346314 080088-100

88.00 11.50 12.50 • 346314 080088-125

89.00 10.00 11.00 • 350314 080089-110

90.00 2.40 2.40 • 080090-024

05/06 11/31
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 32

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

JIS 80.00 90.00 3.00 3.00 • 080090-030

90.00 4.50 5.50 • 354314 080090-055

JIS 90.00 6.00 7.00 •  UHS 80 080090-070

90.00 7.50 8.00 • • 354314 080090-080

90.00 8.00 9.00 •  354314 080090-090

90.00 10.00 11.00 •  354314 080090-110

90.00 12.00 13.00 • • 354314 080090-130

90.00 14.00 15.00  354314 080090-150

92.00 9.00 9.60 • 362314 080092-096

JIS 93.00 3.00 3.00 • 080093-030

93.00 10.00 11.00  366314 080093-110

JIS 95.00 3.00 3.00 • 080095-030

95.00 9.00 10.00  374314 080095-100

95.00 10.00 11.00  374314 080095-110

95.00 11.00 12.00 • • • 374314 080095-120

ISO 95.00 12.00 12.50 • 374314 080095-125

95.00 12.00 13.00 •  374314 080095-130

96.00 9.50 10.50 • • 377314 080096-105

JIS 100.00 3.00 3.00 • 080100-030

100.00 9.50 10.50 • 393314 080100-105

100.00 10.00 11.00 • 393314 080100-110

100.00 11.50 12.50 • 393314 080100-125

JIS 100.00 12.00 13.00 • • UN 80 080100-130

100.00 14.00 14.50 • • • 393314 080100-145

ISO 100.00 15.00 16.00  393314 080100-160

82.00 92.00 10.00 11.00 • 362322 082092-110

82.50 97.50 12.00 13.00 • 383324 082097-130

84.00 92.00 5.00 6.00 • 362330 084092-060

84.50 94.00 8.00 8.80 • 370332 084094-088

85.00 92.50 9.00 10.00 • 364334 085092-100

93.00 8.00 9.00 • 366334 085093-090

93.00 10.00 11.00 • 366334 085093-110

93.00 11.50 12.50 • 366334 085093-125

11/32 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 33

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

85.00 95.00 2.30 2.30 • 085095-023

95.00 7.50 8.00 • • • 374334 085095-080

95.00 8.50 9.50 • 374334 085095-095

95.00 12.00 13.00 • • 374334 085095-130

97.00 8.50 9.50 • 381334 085097-095

JIS 100.00 3.00 3.00 • 085100-030

JIS 100.00 9.00 10.00 •  UHS 85 085100-100

100.00 10.00 11.00  393334 085100-110

100.00 11.50 12.00 •  • 393334 085100-120

100.00 12.00 12.50  • • 393334 085100-125

100.00 12.00 13.00 •  393334 085100-130

JIS 105.00 3.00 3.00 • 085105-030

105.00 12.00 13.00 • • • 413334 085105-130

105.00 13.50 14.50 • • 413334 085105-145

Rod Seals
•

Hydraulic
115.00 15.00 16.00 452334 085115-160
86.00 92.00 6.00 7.00  362338 086092-070

101.00 12.00 13.00 • 397338 086101-130

88.00 96.00 7.50 8.50 • 377346 088096-085

96.00 8.00 9.00 • 377246 088096-090

100.00 9.00 10.00  393346 088100-100

88.50 96.50 11.50 12.50 • 379348 088096-125

89.50 97.00 9.00 10.00 • 381352 089097-100

90.00 96.00 4.80 5.50  377354 090096-055

98.00 6.30 7.30 • 385354 090098-073

98.00 11.50 12.50 • 385354 090098-125

100.00 6.50 7.50  393354 090100-075

100.00 7.00 8.00 • 393354 090100-080

100.00 8.00 9.00 • 393354 090100-090

100.00 9.00 10.00 • 393354 090100-100

100.00 10.00 11.00 • 393354 090100-110

100.00 11.50 12.50 • 393354 090100-125

100.00 12.00 13.00 • 393354 090100-130

102.00 9.00 10.00 • 401354 090102-100

05/06 11/33
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 34

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

JIS 90.00 105.00 2.00 2.00 • 090105-020

JIS 105.00 3.00 3.00 • 090105-030

105.00 7.00 8.00  413354 090105-080

105.00 8.50 9.50 • • 413354 090105-095

JIS 105.00 9.00 10.00 •  UHS 90 090105-100

105.00 9.50 10.50  413354 090105-105

105.00 10.00 11.00  413354 090105-110

ISO 105.00 11.50 12.50 • 413354 090105-125

105.00 12.00 13.00 • • 413354 090105-130

JIS 110.00 3.00 3.00 • 090110-030

110.00 10.00 11.00   433354 090110-110

110.00 11.50 12.50 • • 433354 090110-125

JIS 110.00 12.00 13.00 • • UN 90 090110-130

110.00 14.00 15.00 • 433354 090110-150

ISO 110.00 15.00 16.00  433354 090110-160

110.00 18.00 19.00 • 433354 090110-190

115.00 22.00 23.00 • 452354 090115-230

91.00 99.00 7.50 8.50  389358 091099-085

99.00 8.00 9.00 • 389358 091099-090

93.00 101.00 11.50 12.50 • 397366 093101-125

104.00 10.00 11.00  409366 093104-110

95.00 103.00 8.00 9.00 • 403374 095103-090

103.00 11.50 12.50 • 403374 095103-125

103.00 12.00 13.00 • 405374 095103-130

104.00 10.00 11.00 • 409374 095104-110

105.00 3.00 3.00 • 095105-030

105.00 8.70 9.50 • 413374 095105-095

105.00 10.00 11.00  413374 095105-110

105.00 12.00 13.00 • • 413374 095105-130

107.00 12.00 12.50 • • 421374 095107-125

JIS 110.00 2.00 2.00 • 095110-020

JIS 110.00 3.00 3.00 • 095110-030

JIS 110.00 9.00 10.00 •  UHS 95 095110-100

11/34 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 35

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

• 95.00 110.00 10.00 11.00  433374 095110-110

JIS 110.00 11.40 12.50 • 433374 095110-125

110.00 12.00 13.00 • 433374 095110-130

110.00 15.00 16.00 • 433374 095110-160

112.00 11.00 12.00 • • 441374 095112-120

112.00 11.50 12.50  441374 095112-125

JIS 115.00 3.00 3.00 • 095115-030

115.00 10.00 11.00  452354 095115-110

JIS 115.00 12.00 13.00 •  UN 95 095115-130

115.00 13.50 14.50 • 452374 095115-145

115.00 18.00 19.00 • 452374 095115-190

120.00 19.00 20.00  472374 095120-200

97.00 105.00 11.50 12.50 • 413381 097105-125

105.00 13.00 14.00  413381 097105-140

Rod Seals
•

Hydraulic
105.00 13.50 14.50 413381 097105-145
106.00 14.00 15.00 • 417381 097106-150

98.00 106.70 8.00 9.00 • 417285 098106-090

JIS 112.00 9.00 10.00 • UHS 98 098112-100

118.00 10.00 11.00  464385 098118-110

99.00 109.00 12.00 13.00 • 429389 099109-130

109.00 14.30 15.00 • 429389 099109-150

100.00 108.00 11.50 12.50 • 425393 100108-125

110.00 10.00 11.00 • 433393 100110-110

110.00 11.50 12.50 • 433393 100110-125

110.00 12.50 13.50 • 433393 100110-135

110.00 14.00 15.00  433393 100110-150

113.00 12.50 13.50 • 444393 100113-135

JIS 115.00 3.00 3.00 • 100115-030

115.00 7.00 8.00  452393 100115-080

JIS 115.00 9.00 10.00 •  UHS 100 100115-100

115.00 10.00 11.00  452393 100115-110

115.00 11.00 11.50  • 452393 100115-115

115.00 11.50 12.50 • • 452393 100115-125

05/06 11/35
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 36

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

100.00 115.00 12.00 13.00 • 452393 100115-130

JIS 120.00 3.00 3.00 • 100120-030

120.00 10.00 11.00  472393 100120-110

JIS 120.00 12.00 13.00 •  UN 100 100120-130

120.00 14.00 14.50 • • 472393 100120-145

ISO 120.00 15.00 16.00  472393 100120-160

125.00 12.00 13.00 • 492393 100125-130

125.00 15.00 16.00 • 492393 100125-160

ISO 125.00 19.00 20.00  492393 100125-200

130.00 12.00 13.00 • 511393 100130-130

101.00 111.00 6.50 7.00 • 437397 101111-070

102.00 110.00 8.00 9.00 • 433401 102110-090

104.00 130.00 19.00 19.50 • 511409 104130-195

104.50 112.00 9.00 10.00 • 441411 104112-100

105.00 113.00 6.30 7.30 • 444413 105113-073

113.00 8.00 9.00 • 444413 105113-090

113.00 11.50 12.50 • 444413 105113-125

113.00 13.50 14.50 • 444413 105113-145

115.00 10.50 11.00  • 452413 105115-110

115.00 11.50 12.50 • 452413 105115-125

115.00 13.50 14.50  452413 105115-145

JIS 120.00 3.00 3.00 • 105120-030

120.00 8.00 9.00 • 472413 105120-090

JIS 120.00 9.00 10.00 •  UHS 105 105120-100

120.00 11.50 12.00  • 472413 105120-120

120.00 12.00 13.00 • 472413 105120-130

120.00 15.00 16.00 • 472413 105120-160

JIS 125.00 3.00 3.00 • 105125-030

125.00 11.50 12.50 • 492413 105125-125

125.00 12.00 13.00 •  • 492413 105125-130

125.00 15.00 16.00 •  492413 105125-160

106.00 120.00 8.50 9.50 • 472417 106120-095

JIS 126.00 16.00 17.00 • UN 106 106126-170

11/36 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 37

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

107.00 115.00 7.50 8.00 • 452421 107115-080

115.00 8.00 9.00 • 452421 107115-090

108.00 116.00 8.00 9.00 • 457425 108116-090

120.00 9.00 10.00  472425 108120-100

123.00 12.00 13.00 • 484425 108123-130

110.00 118.00 11.50 12.50 • 464433 110118-125

119.00 10.00 11.00 • 469433 110119-110

120.00 13.50 14.50 • 472433 110120-145

JIS 125.00 3.00 3.00 • 110125-030

JIS 125.00 9.00 10.00 •  UHS 110 110125-100

125.00 11.50 12.00 • • 492433 110125-120

125.00 12.00 13.00 • • 492433 110125-130

125.00 15.00 16.00 •  492433 110125-160

JIS 130.00 3.00 3.00 • 110130-030

Rod Seals


Hydraulic
130.00 10.00 11.00 511433 110130-110
130.00 12.00 12.50 • • 511433 110130-125

130.00 12.00 13.00 • • 511433 110130-130

ISO 130.00 15.00 16.00 •  UN 110 110130-160

130.00 18.00 19.00 • 511433 110130-190

135.00 15.00 15.50 • 531433 110135-155

ISO 135.00 19.00 20.00  531433 110135-200

111.00 121.00 5.50 6.50  476437 111121-065

112.00 122.00 10.00 11.00 • 480440 112122-110

JIS 125.00 9.00 10.00 •  UHS 112 112125-100

127.00 12.00 13.00 • 500441 112127-130

JIS 132.00 16.00 17.00 •  UN 112 112132-170

113.00 123.00 8.70 9.50 • 484444 113123-095

125.00 9.50 10.50 • 492444 113125-105

115.00 123.00 8.00 9.00 • 484452 115123-090

123.00 11.50 12.50 • 484452 115123-125

125.00 7.50 8.00 • 492452 115125-080

125.00 12.00 13.00 • 492452 115125-130

125.00 14.00 15.00 • 492452 115125-150

05/06 11/37
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 38

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

115.00 126.00 15.00 16.00 • 496452 115126-160

127.00 9.00 10.00  500452 115127-100

JIS 130.00 3.00 3.00 • 115130-030

130.00 7.50 8.50  511452 115130-085

JIS 130.00 9.00 10.00  UHS 115 115130-100

130.00 10.00 11.00 • 511452 115130-110

130.00 11.00 12.00   511452 115130-120

130.00 14.50 16.00 • 511452 115130-160

130.00 16.00 17.00 • 511452 115130-170

JIS 135.00 12.00 13.00  531452 115135-130

135.00 13.50 14.50 • 531452 115135-145

JIS 135.00 15.00 16.00 • UN 115 115135-160

140.00 15.00 16.00 • 551452 115140-160

140.00 22.00 23.00 • 551452 115140-230

116.00 124.70 8.00 9.00 • 490457 116124-090

117.00 126.00 14.00 15.00 • 496460 117126-150

118.00 126.00 11.50 12.50 • 496464 118126-125

126.00 13.00 14.00  496464 118126-140

126.00 13.50 14.50 • 496464 118126-145

130.00 12.00 12.50 • 511464 118130-125

119.50 127.00 9.00 10.00 • 500468 119127-100

120.00 128.00 6.30 7.30 • 503472 120128-073

128.00 11.50 12.50 • 503472 120128-125

130.00 7.50 8.00  • 511472 120130-080

130.00 11.50 12.50 • 511472 120130-125

130.00 12.00 13.00 • 511472 120130-130

130.00 14.30 15.00 • • 511472 120130-150

132.00 10.00 11.00  522472 120132-110

JIS 135.00 3.00 3.00 • 120135-030

JIS 135.00 9.00 10.00 •  UHS 120 120135-100

135.00 12.00 12.50  • • 531472 120135-125

135.00 15.00 16.00 •  531472 120135-160

JIS 140.00 3.00 3.00 • 120140-030

11/38 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 39

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

• 120.00 140.00 10.00 11.00  551472 120140-110

140.00 12.00 12.50 • • 551472 120140-125

140.00 12.00 13.00 •  551472 120140-130

JIS 140.00 15.00 16.00 •  UN 120 120140-160

121.00 133.00 7.50 8.00 • 523476 121133-080

135.00 9.00 10.00 • 531476 121135-100

125.00 133.00 8.00 9.00 • 523492 125133-090

133.00 11.50 12.50 • 523492 125133-125

135.00 10.00 11.00 • 531492 125135-110

JIS 140.00 2.00 2.00 • 125140-020

JIS 140.00 3.00 3.00 • 125140-030

JIS 140.00 9.00 10.00 •  UHS 125 125140-100

140.00 11.50 12.00 • • 551492 125140-120

140.00 12.50 13.00 • 551492 125140-130

Rod Seals
•

Hydraulic
140.00 15.00 16.00 551492 125140-160
145.00 11.00 12.50 • 570492 125145-125

145.00 12.00 13.00  570492 125145-130

ISO 145.00 14.50 16.00 • • UN 125 125145-160

145.00 18.00 19.00 • 570492 125145-190

150.00 14.00 14.50 • 590492 125150-145

150.00 14.00 15.00  590492 125150-150

ISO 150.00 19.00 20.00  590492 125150-200

155.00 15.00 16.00 • 610492 125155-160

155.00 18.00 19.00  610492 125155-190

126.00 134.00 7.50 8.00 • 527496 126134-080

134.00 8.00 9.00 • 527496 126134-090

127.00 139.70 9.20 10.00  547500 127139-100

140.00 11.50 12.50 • 551500 127140-125

140.00 12.50 13.50 • 551500 127140-135

128.00 136.00 11.50 12.50 • 535503 128136-125

130.00 138.00 11.50 12.50 • 543511 130138-125

140.00 7.00 8.00  551511 130140-080

JIS 145.00 2.00 2.00 • 130145-020

05/06 11/39
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 40

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

130.00 145.00 9.00 10.00  • UHS 130 130145-100

145.00 12.00 13.00  • • 570511 130145-130

145.00 14.00 15.00  570511 130145-150

145.00 15.00 16.00 • 570511 130145-160

JIS 150.00 3.00 3.00 • 130150-030

150.00 10.00 11.00  590511 130150-110

150.00 12.00 13.00  • 590511 130150-130

150.00 15.00 16.00 •  • 590511 130150-160

155.00 15.00 16.00 • 610511 130155-160

160.00 18.00 19.00  629511 130160-190

131.00 150.00 13.00 14.00 • 590515 131150-140

132.00 142.00 8.70 9.50 • 559519 132142-095

134.50 142.00 9.00 10.00 • 559527 134142-100

135.00 143.00 8.00 9.00 • 562531 135143-090

143.00 11.50 12.50 • 562531 135143-125

150.00 11.00 12.00  590531 135150-120

150.00 11.50 12.50 • 590531 135150-125

150.00 15.00 16.00 • • 590531 135150-160

JIS 155.00 15.00 16.00 • UN 135 135155-160

160.00 15.00 16.00 • 629531 135160-160

160.00 32.00 33.00 • 629531 135160-330

JIS 136.00 150.00 9.00 10.00 • UHS 136 136150-100

137.00 146.00 14.00 15.00 • 574539 137146-150

137.00 152.00 12.00 13.00 • 598539 137152-130

140.00 148.00 11.50 12.50 • 582551 140148-125

150.00 11.50 12.50 • 590551 140150-125

JIS 155.00 9.00 10.00 •  UHS 140 140155-100

155.00 11.00 12.00  610551 140155-120

155.00 12.00 13.00  • 610551 140155-130

155.00 15.00 16.00 • 610551 140155-160

155.50 5.80 6.30  612551 140155-063

JIS 160.00 3.00 3.00 • 140160-030

160.00 12.00 12.50 • 629551 140160-125

11/40 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 41

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

140.00 160.00 12.00 13.00 •  629551 140160-130

160.00 14.00 14.50 • 629551 140160-145

160.00 14.00 15.00 • 629551 140160-150

ISO 160.00 15.00 16.00 •  UN 140 140160-160

165.00 18.00 19.00 • 649551 140165-190

ISO 165.00 19.00 20.00   649551 140165-200

170.00 19.00 20.00 • 669551 140170-200

141.00 151.00 12.00 13.00 • 594555 141151-130

151.00 14.30 15.00 • 594555 141151-150

143.00 151.00 11.50 12.50 • 594562 143151-125

151.00 13.00 14.00  594562 143151-140

151.00 13.50 14.50 • 594562 143151-145

145.00 153.00 7.50 8.50 • 602570 145153-085

153.00 8.00 9.00  602570 145153-090

Rod Seals
•

Hydraulic
155.00 12.00 13.00 610570 145155-130
157.70 9.00 10.00  618570 145157-100

JIS 160.00 2.00 2.00 • 145160-020

JIS 160.00 9.00 10.00 •  UHS 145 145160-100

160.00 12.00 13.00 • 629570 145160-130

JIS 165.00 15.00 16.00 • UN 145 145165-160

146.00 156.00 10.00 11.00 • 614574 146156-110

158.00 7.50 8.00 • 622575 146158-080

147.00 155.00 10.00 11.00  610578 147155-110

160.00 12.00 13.00  629578 147160-130

148.00 160.00 9.50 10.50 • 629582 148160-105

160.00 12.00 13.00 • 629582 148160-130

149.50 157.00 9.00 10.00 • 618586 149157-100

150.00 160.00 12.00 13.00 • 629590 150160-130

JIS 165.00 9.00 10.00 •  UHS 150 150165-100

JIS 170.00 3.00 3.00 • 150170-030

170.00 12.00 13.00  669590 150170-130

170.00 14.00 14.50  • • 669590 150170-145

JIS 170.00 15.00 16.00 •  UN 150 150170-160

05/06 11/41
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 42

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

150.00 170.00 18.00 19.00 • 669590 150170-190

175.00 12.00 13.00  688590 150175-130

180.00 19.00 20.00  708590 150180-200

152.00 160.00 11.50 12.50 • 629598 152160-125

162.00 10.00 11.00 • 637598 152162-110

171.00 11.50 12.50 • 673598 152171-125

152.50 160.50 14.00 15.00 • 631600 152160-150

153.00 168.00 11.50 12.00 • 602661 153168-120

154.00 162.70 8.00 9.00 • 640606 154162-090

169.00 11.00 12.00 • 665606 154169-120

155.00 163.00 11.50 12.50 • 641610 155163-125

JIS 170.00 2.00 2.00 • 155170-020

170.00 9.00 10.00 •  UHS 155 155170-100

170.00 11.00 12.00  669610 155170-120

170.00 14.50 16.00 • 669610 155170-160

160.00 168.00 11.50 12.50 • 661629 160168-125

170.00 11.50 12.50 • 669629 160170-125

JIS 175.00 9.00 10.00 •  UHS 160 160175-100

175.00 15.00 16.00 • • 688629 160175-160

JIS 180.00 4.00 4.00 • 160180-040

180.00 12.00 13.00  708629 160180-130

180.00 13.50 14.50 • 708629 160180-145

JIS 180.00 15.00 16.00 •  708629 160180-160

185.00 3.00 3.00 • 160185-030

185.00 12.00 13.00  728629 160185-130

JIS 185.00 15.00 16.00 • 728629 160185-160

185.00 18.00 19.00 • 728629 160185-190

185.00 19.00 20.00  728629 160185-200

162.00 172.00 12.00 13.00 • 677637 162172-130

172.00 14.30 15.00 • 677637 162172-150

163.00 178.00 12.00 13.00 • 700641 163178-130

JIS 165.00 180.00 9.00 10.00 •  UHS 165 165180-100

184.00 13.00 14.00 • 724649 165184-140

11/42 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 43

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

JIS 165.00 185.00 3.00 3.00 • 165185-030

195.00 20.00 21.00  767649 165195-210

165.50 173.00 9.00 10.00 • 681649 165173-100

170.00 178.00 11.50 12.50 • 700669 170178-125

180.00 10.00 11.00 • 708669 170180-110

180.00 12.00 13.00 • 708669 170180-130

182.70 9.50 10.00 • 719669 170182-100

JIS 190.00 3.00 3.00 • 170190-030

JIS 190.00 12.00 13.00  748669 170190-130

190.00 15.00 16.00 •  748669 170190-160

JIS 195.00 3.00 3.00 • 170195-030

195.00 19.00 20.00  767669 170195-200

200.00 18.00 19.00 • 787669 170200-190

171.00 179.00 11.50 12.50 • 704673 171179-125

Rod Seals


Hydraulic
179.00 13.00 14.00 704673 171179-140
183.00 7.50 8.00 • 720673 171183-080

174.00 182.70 8.00 9.00 • 719685 174182-090

175.00 185.00 12.00 13.00 • 728688 175185-130

JIS 190.00 2.00 2.00 • 175190-020

JIS 190.00 9.00 10.00 •  748688 175190-100

190.00 11.00 12.00  748688 175190-120

200.00 14.00 14.50 • 787688 175200-145

JIS 200.00 15.00 16.00 • 787688 175200-160

177.00 205.00 19.00 20.00 • 807696 177205-200

180.00 188.00 13.50 14.50 • 740708 180188-145

190.00 10.00 11.00 • 748708 180190-110

195.00 11.50 12.50 • 767708 180195-125

195.00 12.50 13.50 • 767708 180195-135

200.00 11.80 13.00 • • 787708 180200-130

200.00 14.00 14.50 • 787708 180200-145

200.00 15.00 16.00 •  787708 180200-160

200.00 19.00 20.00  787708 180200-200

JIS 205.00 3.50 3.50 • 180205-035

05/06 11/43
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 44

C/S ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

JIS 180.00 205.00 16.00 17.00  • 807708 180205-170

JIS 205.00 19.00 20.00  807708 180205-200

210.00 19.50 20.50 • 826708 180210-205

220.00 20.00 21.00 • 866708 180220-210

183.00 190.50 9.00 10.00 • 750720 183190-100

193.00 14.30 15.00 • 759720 183193-150

185.00 193.00 11.50 12.50 • 759728 185193-125

JIS 205.00 3.00 3.00 • 185205-030

187.00 202.00 11.00 12.00 • 795736 187202-120

188.00 203.00 12.00 13.00 • 799740 188203-130

190.00 210.00 4.00 4.00 • 190210-040

JIS 210.00 12.00 13.00 •  826748 190210-130

210.00 14.00 14.50 • • 826748 190210-145

210.00 15.00 16.00  • 826748 190210-160

JIS 215.00 4.00 4.00 • 190215-040

215.00 12.00 13.00  846748 190215-130

JIS 215.00 15.00 16.00 • 846748 190215-160

215.00 19.00 20.00  846748 190215-200

JIS 195.00 210.00 2.50 2.50 • 195210-025

JIS 210.00 9.00 10.00 • 826767 195210-100

196.00 204.70 8.00 9.00 • 605771 196204-090

197.00 209.00 7.50 8.00 • 823775 197209-080

209.00 12.00 13.00 • 822775 197209-130

198.00 207.60 6.50 7.50  817779 198207-075

200.00 208.00 11.50 12.50 • 818787 200208-125

212.00 15.00 16.00  834787 200212-160

JIS 220.00 12.00 13.00 •  866787 200220-130

220.00 15.00 16.00  • 866787 200220-160

225.00 18.00 19.00 • 885787 200225-190

ISO 225.00 19.00 20.00  885787 200225-200

201.50 209.00 9.00 10.00 • 822793 201209-100

205.00 220.00 12.50 13.50 • 866807 205220-135

207.00 217.00 14.30 15.00 • 854814 207217-150

11/44 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 45

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

209.00 228.00 13.00 14.00 • 897822 209228-140

JIS 210.00 230.00 4.00 4.00 • 210230-040

JIS 230.00 12.00 13.00  905826 210230-130

230.00 13.00 14.50 • 905826 210230-145

230.00 15.00 16.00  905826 210230-160

230.00 16.00 17.00  905826 210230-170

JIS 235.00 19.00 20.00  925826 210235-200

235.00 24.50 26.00  925826 210235-260

240.00 22.00 23.00  944826 210240-230

212.00 220.00 13.50 14.50 • 866834 212220-145

218.00 237.00 16.00 17.00 • 933858 218237-170

220.00 235.00 12.00 13.00  925866 220235-130

JIS 240.00 3.00 3.00 • 220240-030

JIS 240.00 4.00 4.00 • 220240-040

Rod Seals
• 

Hydraulic
JIS 240.00 12.00 13.00 944866 220240-130
240.00 15.00 16.00  944866 220240-160

250.00 18.00 19.00 •  984866 220250-190

250.00 19.50 20.50 • • 984866 220250-205

221.00 228.50 9.00 10.00 • 899870 221228-100

221.50 230.20 12.00 13.00 • 907872 221230-130

223.00 235.00 7.50 8.00 • 925878 223235-080

225.00 241.50 12.50 13.00 • 950886 225241-130

245.00 15.00 16.00 • 964886 225245-160

250.00 12.00 13.00  984886 225250-130

250.00 19.00 20.00  984886 225250-200

228.00 240.00 12.00 13.00 • 944897 228240-130

230.00 246.00 12.00 13.00 • 968905 230246-130

JIS 250.00 4.00 4.00 • 230250-040

JIS 250.00 12.00 13.00  984905 230250-130

250.00 15.00 16.00  984905 230250-160

255.00 19.00 20.00  1003905 230255-200

260.00 23.65 25.00  1024905 230260-250

231.00 241.00 14.30 15.00 • 948909 231241-150

05/06 11/45
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 46

NR
C/S ØD

Ød

S E A L S

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA Euro

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

232.00 246.00 12.00 13.00 • 968913 232246-130

235.00 247.00 10.00 11.00  972925 235247-110

240.00 255.00 12.00 13.00 • 1003944 240255-130

JIS 260.00 4.00 4.00 • 240260-040

260.00 12.00 13.00  1024944 240260-130

260.00 15.00 16.00  1024944 240260-160

270.00 18.00 19.00  1062944 240270-190

270.00 22.00 23.00  1062944 240270-230

242.00 249.50 9.00 10.00 • 982952 242249-100

245.00 270.00 15.00 16.00 • 1062965 245270-160

249.00 257.70 12.00 13.00 • 1014980 249257-130

261.00 7.00 8.00 • 1027980 249261-080

JIS 250.00 270.00 4.00 4.00 • 250270-040

270.00 12.00 13.00  1062984 250270-130

270.00 15.00 16.00   1062984 250270-160

280.00 22.00 23.00   1102984 250280-230

260.00 280.00 15.00 16.00   11021024 260280-160

265.00 290.00 12.00 13.00  11411043 265290-130

290.00 17.00 18.00 • 11411043 265290-180

270.00 290.00 17.00 18.00 • 11411062 270290-180

300.00 15.00 16.00 • 11811062 270300-160

JIS 300.00 18.00 19.00  11811062 270300-190

279.00 287.70 12.00 13.00 • 11291098 279287-130

280.00 300.00 15.00 16.00 • 11811102 280300-160

305.00 12.00 13.00  12001102 280305-130

305.00 15.00 16.00  12001102 280305-160

305.00 19.00 20.00  12001102 280305-200

310.00 22.00 23.00  12201102 280310-230

ISO 310.00 24.00 25.00  12201102 280310-250

290.00 310.00 15.00 16.00  12201141 290310-160

295.00 320.00 19.00 20.00  12501161 295320-200

300.00 320.00 15.00 16.00  12591181 300320-160

325.00 24.00 25.00 • 12791181 300325-250

11/46 05/06
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 47

RS RSL RSLA RSS MAD TS

TSL TSLA CP CPI 19M

Rod Dia Hsg Dia Seal Ln Hss  MAD RS TS RSLA

Ød ØD L • 19M RSS RSL TSL TSLA CP CPI Ref Size Code

305.00 320.00 17.00 18.00 • 12591200 305320-180

310.00 330.00 15.00 16.00  12991220 310330-160

320.00 340.00 15.00 16.00  13381259 320340-160

350.00 22.00 23.00  13771259 320350-230

325.00 350.00 19.00 20.00  13771279 325350-200

340.00 360.00 15.00 16.00  14171338 340360-160

370.00 20.00 21.00  14561338 340370-210

380.00 21.00 22.00  14961338 340380-220

345.00 375.00 20.00 21.00  14761358 345375-210

350.00 370.00 15.00 16.00  14561377 350370-160

385.00 24.40 25.40 • 15151377 350385-254

360.00 380.00 15.00 16.00  14961417 360380-160

390.00 22.00 23.00 • 15351417 360390-230

370.00 390.00 15.00 16.00  15351456 370390-160

Rod Seals


Hydraulic
380.00 400.00 15.00 16.00 15741496 380400-160
385.00 410.00 12.00 13.00  16141515 385410-130

05/06 11/47
NRS294-NR Seals Metric 11 8/30/05 2:29 PM Page 48
NRS294-NR Seals Metric 12 8/30/05 2:26 PM Page 1

GR2
NR
Glide & Buffer Rings

S E A L S

Design
Rod seals

GR2 are designed as high pressure, low friction double

acting rod seals for use in heavy duty hydraulic applications.
They consist of an outer NBR o-ring energiser and an inner
ring of Bronze filled PTFE. This design, often found in rotary
couplings, is usually supplied in GR3 standard housing sizes.
Through the use of different energising materials a low cost
high temperature seal can be created. Due to the properties
of Bronze PTFE speeds up to 15 m/s can be accommodated.

Key Features
Medium to heavy duty Operating Conditions

Rod seal only Pressure

400 Bar
Higher pressures 6,000 Psi

Temperature
High speed capability
-40° to 110°C
-40° to 230°F
Compact housing
Speed
Easy to fit 4.0m /sec
12.0'/sec

Surface Finish µmRa

ØD Ød ØD L
0.1 - 0.25 ≤0.8 1.0
C /S Ød

10to15º
Tolerances
C
Ød ØD L
f8 H9 - 0.0 + 0.2

Chamfer Radii
c/s 2.5 3.75 5.50 7.75 10.5 12.25
C 1.5 2.0 2.5 5.0 7.5 10.0
r 0.3 0.5 0.8 1.2 1.5 1.5

Extrusion Gap
Pressure Bar 100 200 300 400
G/2
G 0.80 0.65 0.50 0.35
L r
Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 12/1
NRS294-NR Seals Metric 12 8/30/05 2:26 PM Page 2

GR3
NR
Glide & Buffer Rings

S E A L S

Design
Rod seals

GR3 are designed as high pressure, low friction single acting

rod seals for use in heavy duty hydraulic and pneumatic
applications. They consist of an outer NBR o-ring energiser
and an inner ring of Bronze filled PTFE. This inner ring has a
step machined into approximately the middle. This step
reduces the area which the energiser loads, creating a dry
rod seal. The step faces the direction of the pressure.
Through the use of different energising materials a low cost
high temperature seal can be created. Due to the properties
of Bronze PTFE speeds up to 15 m/s can be accommodated.

Key Features
Medium to heavy duty Operating Conditions

Rod seal only Pressure

350 Bar
Higher pressures 5,000 Psi

Temperature
High speed capability
-40° to 110°C
-40° to 230°F
Compact housing
Speed
Easy to fit 4.0m /sec
12.0'/sec

Surface Finish µmRa

ØD Ød ØD L
0.1 - 0.25 ≤0.8 1.0
C /S Ød

10to15º
Tolerances
C
Ød ØD L
f8 H9 - 0.0 + 0.2

Chamfer Radii
C/S 2.5 3.75 5.50 7.75 10.5 12.25
C 1.5 2.0 2.5 5.0 7.5 10.0
r 0.3 0.5 0.8 1.2 1.5 1.5
PRESSURE

Extrusion Gap
Pressure Bar 100 200 300 400
G/2
G 0.80 0.65 0.50 0.35
L r
Typical Examples
Reciprocating Rotary Oscillating Helix

12/2 05/06
NRS294-NR Seals Metric 12 8/30/05 2:26 PM Page 3

GR5
NR
Glide & Buffer Rings

S E A L S

Design
Rod seals

GR5 are designed as high pressure low friction single acting

rod seals for use in heavy duty hydraulic and pneumatic
applications. They consist of an outer Viton o-ring energiser
and an inner ring of Bronze filled or virgin PTFE. This inner
ring has a step machined into approximately the middle. This
step reduces the area which the energiser loads, creating a
dry rod seal. The step faces the direction of the pressure.
Due to the properties of Bronze PTFE speeds up to 15 m/s
can be accommodated.

Key Features
Medium to heavy duty Operating Conditions

Rod seal only Pressure

350 Bar
Higher pressures 5,000 Psi

Temperature
High speed capability
-20° to 200°C
-4° to 392°F
Higher temperature capability
Speed
Easy to fit 4.0m /sec
12.0'/sec

Surface Finish µmRa

ØD Ød ØD L
0.1 - 0.25 ≤0.8 1.0
C /S Ød

10to15º
Tolerances
C
Ød ØD L
f8 H9 - 0.0 + 0.2

Chamfer Radii
C/S 2.5 3.75 5.50 7.75 10.5 12.25
C 1.5 2.0 2.5 5.0 7.5 10.0
r 0.3 0.5 0.8 1.2 1.5 1.5
PRESSURE

Extrusion Gap
Pressure Bar 100 200 300 400
G/2
G 0.80 0.65 0.50 0.35
L r
Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 12/3
NRS294-NR Seals Metric 12 8/30/05 2:26 PM Page 4

GRU
NR
Glide & Buffer Rings

S E A L S

Design
Rod seals

GRU are a symmetrical buffer type single acting seal. They

are a straight cut polyurethane ring usually with a groove or
slot, which faces the pressure, to enable oil to flow to the
secondary seal to maintain lubrication and a dry rod. The
buffer seal is designed to absorb pressure fluctuations under
high load conditions, thus increasing the life of the tandem
seal. This type of arrangement is used where both low
friction and low leakage are required. The seals high pressure
resistance makes it suitable for use in heavy duty
applications where shock loads and pressure spikes occur,
as found in mobile plant equipment.
Key Features
Medium to heavy duty Operating Conditions

Rod seal only Pressure

350 Bar
Higher pressures 5,000 Psi

Temperature
High speed capability
-40° to 105°C
-40° to 221°F
Compact housing
Speed
Easy to fit 0.8m /sec
2.5'/sec

Surface Finish µmRa

ØD Ød ØD L
0.1 - 0.25 ≤0.8 2.0
C /S Ød

25º
Tolerances
Ød ØD L
f9 H11 - 0.0 + 0.2

Chamfer Radii
Radii r 0.2

Extrusion Gap
Pressure Bar 100 200 300 400
G 0.80 0.65 0.50 0.35
G/2

L r
Typical Examples
Reciprocating Rotary Oscillating Helix

12/4 05/06
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 5

HBY
NR
Glide & Buffer Rings

S E A L S

Design
Rod seals

HBY is a single acting buffer seal for gland applications using

the same housing design as GR3. The sealing element is
manufactured in Polyurethane, with a Polyacetyl anti-
extrusion ring. Designed as a high pressure low friction seal
for use in second generation tandem sealing arrangements.
The HBY seal is used on the pressure side and a low leak
but higher friction seal on the non pressure side to collect oil
film during the positive stroke. This type of arrangement is
used where both low friction and low leakage are required.
The seals high pressure resistance makes it suitable for use
in heavy duty applications where shock loads and pressure
Key Features spikes occur, as found in mobile plant equipment.

Medium to heavy duty Operating Conditions

Rod seal only Pressure

500 Bar
Higher pressures 7,000 Psi

Temperature
High speed capability
-40° to 105°C
-40° to 221°F
Compact housing
Speed
Easy to fit 0.8m /sec
2.5'/sec

Surface Finish µmRa

ØD Ød ØD L
0.1 - 0.25 ≤0.8 2.0
C /S Ød

25º
Tolerances
Ød ØD L
f9 H11 - 0.0 + 0.2

Chamfer Radii
C/S 7.75
C 4.0
r 0.8

Extrusion Gap
Pressure Bar 100 200 300 400
G/2
G 0.80 0.65 0.50 0.35
L r

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 12/5
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 6
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 7

GR2 GR3 GR5 GRU HBY

Rod Dia Hsg Dia Seal Ln Hsg

Ød ØD SL L GR2 GR3 GR5 GRU HBY Size Code

ISO 10.00 15.00 1.90 2.20 • • 010015-022

ISO 12.00 17.00 1.90 2.20 • • 012017-022

ISO 19.50 2.80 3.20 • • 012019-032

ISO 14.00 19.00 1.90 2.20 • • 014019-022

ISO 21.50 2.80 3.20 • • 014021-032

15.00 22.50 2.80 3.20 • • 015022-032

ISO 16.00 23.50 2.80 3.20 • • 016023-032

ISO 18.00 25.50 2.80 3.20 • • 018025-032

ISO 20.00 27.50 2.80 3.20 • • 020027-032

ISO 31.00 3.80 4.20 • • 020031-042

ISO 22.00 29.50 2.80 3.20 • • 022029-032

ISO 33.00 3.80 4.20 • • 022033-042

ISO 25.00 32.50 2.80 3.20 • • 025032-032

Glide & Buffer Rings

35.00 4.70 5.00 • 025035-050

Rod Seals
ISO 36.00 3.80 4.20 • • 025036-042
28.00 35.50 2.80 3.20 • • 028035-032

ISO 39.00 3.80 4.20 • • 028039-042

30.00 37.50 2.80 3.20 • • 030037-032

41.00 3.00 3.20 • 030041-032

41.00 3.80 4.20 • • 030041-042

32.00 39.50 2.80 3.20 • • 032039-032

ISO 43.00 3.80 4.20 • • 032043-042

47.50 5.90 6.30 • • 032047-063

35.00 42.50 2.80 3.20 • • 035042-032

46.00 3.00 3.20 • 035046-032

46.00 3.80 4.20 • • 035046-042

48.00 3.00 3.20 • 035048-032

ISO 36.00 47.00 3.80 4.20 • • 036047-042

38.00 45.50 2.80 3.20 • • 038045-032

53.50 5.90 6.30 • • 038053-063

40.00 48.00 3.00 3.20 • 040048-032

ISO 51.00 3.80 4.20 • • 040051-042

55.50 5.90 6.30 • • • 040055-063

05/06 12/7
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 8

L
G/2

r C/S
ØD

NR
S E A L S
Ød

Rod Dia Hsg Dia Seal Ln Hsg

Ød ØD SL L GR2 GR3 GR5 GRU HBY Size Code

42.00 53.00 3.80 4.20 Call Call 042053-042

57.50 5.90 6.30 Call Call 042057-063

ISO 45.00 56.00 3.80 4.20 • • 045056-042

ISO 60.50 5.90 6.30 • • • 045060-063

48.00 59.00 3.80 4.20 Call Call 048059-042

63.50 5.90 6.30 Call Call 048063-063

50.00 58.00 3.00 3.20 • 050058-032

ISO 61.00 3.80 4.20 • • 050061-042

63.00 3.80 4.30 • 050063-043

65.50 5.90 6.30 • • • 050065-063

52.00 63.00 3.80 4.20 Call Call 052063-042

67.50 5.90 6.30 Call Call 052067-063

55.00 66.00 3.80 4.20 • • 055066-042

70.50 5.90 6.30 • • • 055070-063

ISO 56.00 67.00 3.80 4.20 • • 056067-042

68.00 3.80 4.30 • 056068-043

70.00 3.00 3.20 • 056070-032

ISO 71.50 5.90 6.30 • • 056071-063

73.00 4.80 5.20 • 056073-052

60.00 71.00 3.80 4.20 • • 060071-042

75.50 5.90 6.30 • • • 060075-063

ISO 63.00 74.00 3.80 4.20 • • 063074-042

ISO 78.50 5.90 6.30 • • • 063078-063

80.00 4.60 5.00 • 063080-050

65.00 78.00 3.80 4.30 • 065078-043

80.50 5.90 6.30 • • • 065080-063

70.00 83.00 3.80 4.30 • 070083-043

83.50 3.00 3.20 • 070083-032

84.00 3.00 3.20 • 070084-032

ISO 85.50 5.90 6.30 • • • 070085-063

73.00 88.50 5.90 6.30 • • 073088-063

75.00 88.00 3.80 4.30 • 075088-043

90.50 5.90 6.30 • • • 075090-063

12/8 05/06
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 9

GR2 GR3 GR5 GRU HBY

Rod Dia Hsg Dia Seal Ln Hsg

Ød ØD SL L GR2 GR3 GR5 GRU HBY Size Code

80.00 93.00 3.80 4.30 • 080093-043

ISO 95.50 5.90 6.30 • • • 080095-063

85.00 100.50 5.90 6.30 • • • 085100-063

90.00 104.00 3.80 4.30 • 090104-043

ISO 105.50 5.90 6.30 • • • 090105-063

95.00 110.50 5.90 6.30 • • • 095110-063

100.00 113.00 3.80 4.30 • 100113-043

ISO 115.50 5.90 6.30 • • • 100115-063

105.00 120.50 5.90 6.30 • • • 105120-063

ISO 110.00 125.50 5.90 6.30 • • • 110125-063

115.00 130.50 5.90 6.30 • • • 115130-063

120.00 135.50 5.90 6.30 • • • 120135-063

ISO 125.00 140.50 5.90 6.30 • • • 125140-063

Glide & Buffer Rings

130.00 145.50 5.90 6.30 • • • 130145-063

Rod Seals
135.00 150.50 5.90 6.30 • • 135150-063
ISO 140.00 155.50 5.90 6.30 • • • 140155-063

145.00 160.50 5.90 6.30 • • 145160-063

150.00 161.00 3.80 4.20 • • 150161-042

165.50 5.90 6.30 • • • 150165-063

171.00 7.70 8.10 • • 150171-081

155.00 170.50 5.90 6.30 • • 155170-063

ISO 160.00 175.50 5.90 6.30 • • • 160175-063

181.00 7.70 8.10 • • 160181-081

170.00 185.50 5.90 6.30 • • • 170185-063

191.00 7.70 8.10 • • 170191-081

ISO 180.00 195.50 5.90 6.30 • • • 180195-063

ISO 201.00 7.70 8.10 • • 180201-081

190.00 205.50 5.90 6.30 • • • 190205-063

ISO 200.00 221.00 7.70 8.10 • • 200221-081

210.00 231.00 7.70 8.10 • • 210231-081

ISO 220.00 241.00 7.70 8.10 • • 220241-081

230.00 251.00 7.70 8.10 • • 230251-081

240.00 261.00 7.70 8.10 • • 240261-081

05/06 12/9
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 10

L
G/2

C/S

NR
r
ØD

Ød

S E A L S

Rod Dia Hsg Dia Seal Ln Hsg

Ød ØD SL L GR2 GR3 GR5 GRU HBY Size Code

ISO 250.00 271.00 7.70 8.10 • • 250271-081

270.00 294.50 7.70 8.10 • • 270294-081

ISO 280.00 304.50 7.70 8.10 • • 280304-081

300.00 324.50 7.70 8.10 • • 300324-081

ISO 320.00 344.50 7.70 8.10 • • 320344-081

ISO 360.00 384.50 7.70 8.10 • • 360384-081

12/10 05/06
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 1

VS1
NR
V Pack Sets

S E A L S

Design
Rod seals

VS1 are a single acting rod or piston seal for medium to

heavy duty applications. The assembly consists of a male
and female adaptor with a series of ‘V’ shaped rings. The
number of ‘V’ rings may be varied to alter the assembled
height. The material is generally fabric reinforced NBR,
although some sets incorporate NBR only ‘V’ rings to assist
low pressure sealing. This is a non preferred design but it still
has a place in applications where difficult conditions prevail
such as pressure surges and misalignment.

Key Features
Medium to heavy duty Operating Conditions

Piston or rod Pressure

700 Bar
Wide size range 10,000 Psi

Temperature
Handles some misalignment
-30° to 100°C
-22° to 212°F
Hard wearing
Speed
0.5m /sec
1.5'/sec
ØD Surface Finish µmRa
C /S Ød Ød ØD L
25˚ 0.1 – 0.25 ≤0.8 2.0
25˚

Tolerances
Ød ØD L
C
f9 H11 -0 + 0.2

Chamfer Radii
r C/S 5.0 7.5 10.0
L C 2.5 4.0 5.0
r 0.3 0.4 0.6

Typical Examples
Reciprocating Rotary Oscillating Helix

Similar Styles

05/06 13/1
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 2

SM1
NR
V Pack Sets

S E A L S

Design
Rod seals

SM1 is a three piece rod seal consisting of an NBR sealing

element which is backed up by a tough thermoplastic
elastomer adaptor with a Polyacetal anti-extrusion ring on
the inside diameter heal. The complete assembly forms a
highly robust sealing unit for use in high pressure
applications where shock loads and pressure spikes are
present. The corrugations hold grease/oil and help to reduce
friction and increase service life. This design is a modern and
common replacement for veepac seals with the main
difference that type SM1 does not require preload as this is
already built into the rubber element.
Key Features
Heavy duty Operating Conditions

Higher pressure Pressure

700 Bar
Will handle some 10,000 Psi

mis-alignment Temperature
-40° to 130°C
Anti-extrusion ring -40° to 266°F

Speed
Vee set replacement
0.5m /sec
Nil adjustment required 1.5'/sec

Surface Finish µmRa

Hardy construction Ød ØD L
0.1 – 0.25 ≤0.8 2.0

ØD

C/S Ød Tolerances
25° Ød ØD L
25°
f8 Js11 -0.0
+0.2

C Chamfer Radii
C/S 8.0 10.0 12.5
C 5.0 5.0 6.5
r 0.4 0.4 0.4
r

L
r Typical Examples
Reciprocating Rotary Oscillating Helix

Similar Styles

13/2 05/06
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 3

VS1 SM1

Rod Dia Hsg Dia Hsg

Ød ØD L Con-Fig Euro Code Product Code

15.00 27.00 20.00 3 Pce 106059 SM1-015027-200

16.00 26.00 18.50 1.3.2.1 102063 VS1-016026-185

18.00 28.00 18.50 1.3.2.1 110070 VS1-018028-185

20.00 30.00 18.50 1.3.2.1 118078 VS1-020030-185

31.50 17.30 1.3.0.1 124078 VS1-020031-175

32.00 22.50 1.3.2.1 125078 VS1-020032-225

33.00 20.00 3 Pce 129078 SM1-020033-200

22.00 32.00 18.50 1.3.0.1 125086 VS1-022032-185

35.00 20.00 3 Pce 137086 SM1-022035-200

25.00 35.00 17.10 1.3.0.1 137098 VS1-025035-173

37.00 22.50 1.3.2.1 145098 VS1-025037-225

38.00 20.00 3 Pce 149098 SM1-025038-200

40.00 11.00 1.1.0.1 157098 VS1-025040-110

40.00 22.50 1.3.2.1 157098 VS1-025040-225

Rod Seals
V Pack Sets
27.00 42.00 11.00 1.1.0.1 165106 VS1-027042-110
28.00 40.00 22.50 1.3.2.1 157110 VS1-028040-225

41.00 20.00 3 Pce 161110 SM1-028041-200

30.00 40.00 18.50 1.3.2.1 157118 VS1-030040-185

42.00 22.50 1.3.2.1 165118 VS1-030042-225

43.00 20.00 3 Pce 169118 SM1-030043-200

45.00 22.50 1.3.2.1 177118 VS1-030045-225

32.00 47.00 22.50 1.3.2.1 185125 VS1-032047-225

47.00 22.50 3 Pce 185125 SM1-032047-225

35.00 45.00 25.60 3 Pce 177137 SM1-035045-256

47.00 22.50 1.3.2.1 185137 VS1-035047-225

47.00 22.50 3 Pce 185137 SM1-035047-225

50.00 22.50 1.3.2.1 196137 VS1-035050-225

50.00 22.50 3 Pce 196137 SM1-035050-225

36.00 48.00 22.50 1.3.2.1 188141 VS1-036048-225

51.00 22.50 3 Pce 200141 SM1-036051-225

40.00 50.00 23.00 1.3.0.1 196157 VS1-040050-230

52.00 22.50 3 Pce 204157 SM1-040052-225

55.00 11.50 1.1.0.1 216157 VS1-040055-115

05/06 13/3
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 4

NR
S E A L S
ØD

Ød

Rod Dia Hsg Dia Hsg

Ød ØD L Con-Fig Euro Code Product Code

40.00 55.00 22.50 1.3.2.1 216157 VS1-040055-225

55.00 22.50 3 Pce 216157 SM1-040055-225

60.00 30.00 1.3.0.1 236157 VS1-040060-300

60.00 30.00 3 Pce 236157 SM1-040060-300

45.00 55.00 17.30 1.3.0.1 216177 VS1-045055-175

60.00 22.50 1.3.2.1 236177 VS1-045060-225

60.00 22.50 3 Pce 236177 SM1-045060-225

65.00 27.50 1.3.2.1 255177 VS1-045065-275

65.00 28.00 3 Pce 255177 SM1-045065-280

48.00 63.00 12.50 1.1.0.1 248188 VS1-048063-125

50.00 63.00 20.00 3 Pce 248196 SM1-050063-200

65.00 22.50 1.3.2.1 255196 VS1-050065-225

65.00 22.50 3 Pce 225196 SM1-050065-225

65.00 24.50 3 Pce 255196 SM1-050065-245

70.00 30.00 1.2.0.1 275196 VS1-050070-300

70.00 30.00 3 Pce 275196 SM1-050070-300

55.00 70.00 22.50 1.3.2.1 275216 VS1-055070-225

70.00 22.50 3 Pce 275216 SM1-055070-225

70.00 26.50 1.3.0.1 275216 VS1-055070-265

75.00 26.00 1.3.0.1 295216 VS1-055075-260

75.00 30.00 3 Pce 295216 SM1-055075-300

56.00 71.00 22.50 1.3.2.1 279220 VS1-056071-225

71.00 25.00 3 Pce 279220 SM1-056071-250

76.00 28.00 3 Pce 299220 SM1-056076-280

60.00 75.00 22.50 1.3.2.1 295236 VS1-060075-225

75.00 22.50 3 Pce 295236 SM1-060075-225

77.00 27.00 3 Pce 303236 SM1-060077-270

80.00 26.00 1.3.0.1 314236 VS1-060080-260

80.00 30.00 3 Pce 314236 SM1-060080-300

80.00 32.00 3 Pce 314236 SM1-060080-320

80.00 34.90 3 Pce 314236 SM1-060080-349

80.00 37.00 1.3.2.1 314236 VS1-060080-370

63.00 83.00 27.00 3 Pce 326248 SM1-063083-270

13/4 05/06
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 5

VS1 SM1

Rod Dia Hsg Dia Hsg

Ød ØD L Con-Fig Euro Code Product Code

63.00 83.00 29.00 3 Pce 326248 SM1-063083-290

83.00 37.00 1.3.2.1 326248 VS1-063083-370

65.00 80.00 22.50 1.3.2.1 314255 VS1-065080-225

85.00 29.00 3 Pce 334255 SM1-065085-290

85.00 30.00 1.3.0.1 334255 VS1-065085-300

85.00 40.00 1.3.2.1 334255 VS1-065085-400

70.00 83.00 25.00 3 Pce 326275 SM1-070083-250

85.00 22.50 1.3.2.1 334275 VS1-070085-225

85.00 22.50 3 Pce 334275 SM1-070085-225

85.00 25.00 3 Pce 334275 SM1-070085-250

90.00 30.00 1.3.0.1 354275 VS1-070090-300

90.00 30.00 3 Pce 354275 SM1-070090-300

90.00 40.00 1.3.2.1 354275 VS1-070090-400

75.00 90.00 22.50 1.3.2.1 354295 VS1-075090-225

Rod Seals
V Pack Sets
95.00 30.00 1.3.0.1 374295 VS1-075095-300

95.00 30.00 3 Pce 374295 SM1-075095-300

76.50 96.50 32.50 3 Pce 379301 SM1-076096-325

80.00 95.00 22.50 1.3.2.1 374314 VS1-080095-225

100.00 30.00 1.3.0.1 393314 VS1-080100-300

100.00 30.00 3 Pce 393314 SM1-080100-300

100.00 41.50 1.3.2.1 393314 VS1-080100-415

85.00 98.00 25.00 3 Pce 385334 SM1-085098-250

100.00 22.50 1.3.2.1 393334 VS1-085100-225

105.00 30.00 3 Pce 413334 SM1-085105-300

90.00 105.00 22.50 1.3.2.1 413354 VS1-090105-225

105.00 25.00 3 Pce 433334 SM1-090105-250

110.00 30.00 1.3.0.1 433354 VS1-090110-300

110.00 30.00 3 Pce 433354 SM1-090110-300

110.00 40.00 1.3.2.1 433354 VS1-090110-400

95.00 110.00 24.00 1.3.0.1 433374 VS1-095110-240

115.00 28.00 3 Pce 452374 SM1-095115-280

100.00 120.00 30.00 3 Pce 472393 SM1-100120-300

120.00 40.00 1.4.1.1 472393 VS1-100120-400

05/06 13/5
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 6

NR
S E A L S
ØD

Ød

Rod Dia Hsg Dia Hsg

Ød ØD L
HL Con-Fig Euro Code Product Code

100.00 125.00 27.50 1.3.0.1 492393 VS1-100125-275

105.00 118.00 25.00 3 Pce 464413 SM1-105118-250

120.00 34.00 3 Pce 472413 SM1-105120-340

110.00 130.00 32.50 3 Pce 511433 SM1-110130-325

115.00 130.00 30.00 3 Pce 511452 SM1-115130-300

120.00 140.00 30.00 1.3.0.1 551472 VS1-120140-300

140.00 30.00 3 Pce 551472 SM1-120140-300

125.00 145.00 30.00 3 Pce 570492 SM1-125145-300

150.00 27.20 1.2.1.1 590492 VS1-125150-274

130.00 150.00 28.00 3 Pce 590511 SM1-130150-280

150.00 29.56 1.3.0.1 590511 VS1-130150-297

160.00 29.00 1.1.0.1 629511 VS1-130160-290

160.00 41.30 1.3.0.1 629511 VS1-130160-415

135.00 155.00 28.00 3 Pce 610531 SM1-135155-280

140.00 160.00 28.00 3 Pce 659551 SM1-140160-280

145.00 165.00 22.50 3 Pce 649570 SM1-145165-225

165.00 28.00 3 Pce 649570 SM1-145165-280

150.00 170.00 28.00 3 Pce 669590 SM1-150170-280

180.00 60.00 1.3.2.1 708590 VS1-150180-600

155.00 175.00 28.00 3 Pce 688610 SM1-155175-280

160.00 180.00 28.00 3 Pce 708629 SM1-160180-280

165.00 185.00 30.00 3 Pce 728649 SM1-165185-300

170.00 195.00 35.00 3 Pce 767669 SM1-170195-350

180.00 205.00 35.00 3 Pce 807708 SM1-180205-350

210.00 32.80 1.3.0.1 826708 VS1-180210-330

185.00 210.00 35.00 3 Pce 826728 SM1-185210-350

190.00 215.00 35.00 3 Pce 846748 SM1-190215-350

200.00 225.00 35.00 3 Pce 885787 SM1-200225-350

230.00 32.80 1.3.0.1 905787 VS1-200230-330

215.00 240.00 35.00 3 Pce 944846 SM1-215240-350

220.00 245.00 35.00 3 Pce 964866 SM1-220245-350

240.00 265.00 35.00 3 Pce 1043945 SM1-240265-350

270.00 45.00 1.3.0.1 1062944 VS1-240270-450

13/6 05/06
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 7

VS1 SM1

Rod Dia Hsg Dia Hsg

Ød ØD L Con-Fig Euro Code Product Code

250.00 270.00 32.00 1.3.0.1 1062984 VS1-250270-320

275.00 35.00 3 Pce 1082984 SM1-250275-350

280.00 32.80 1.3.0.1 1102984 VS1-250280-330

260.00 280.00 30.00 3 Pce 11021024 SM1-260280-300

265.00 290.00 35.00 3 Pce 11411043 SM1-265290-350

275.00 300.00 35.00 3 Pce 11811082 SM1-275300-350

280.00 305.00 35.00 3 Pce 12011102 SM1-280305-350

315.00 38.25 1.3.0.1 12401102 VS1-280315-384

300.00 320.00 32.00 1.3.0.1 12591181 VS1-300320-320

325.00 35.00 3 Pce 12791181 SM1-300325-350

310.00 330.00 30.00 1.3.0.1 12991220 VS1-310330-300

315.00 350.00 38.25 1.3.0.1 13771240 VS1-315350-384

320.00 365.00 55.00 1.3.0.1 14371259 VS1-320365-550

335.00 360.00 35.00 3 Pce 14171318 SM1-335360-350

Rod Seals
V Pack Sets
340.00 380.00 60.00 1.3.0.1 14961338 VS1-340380-600

05/06 13/7
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 8
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 1

GSP
NR
Pneumatic

S E A L S

Design
Rod seals

GSP pneumatic Polyurethane 90 shore A rod seal, has been

redesigned with respect to traditional u-profile use in
pneumatics to give significant improvements. The dynamic
lip has no sharp edges to reduce friction, along with
increased depth of the u-profile to increase flexibility.
The use of urethane instead of rubber increases seal life and
facilitates the use of non-lubricated air.

Key Features
Dry or lubricated air media Operating Conditions

Rod only Pressure

16 Bar
Low pressure capability 230 Psi

Temperature
Dynamic lip reaction
-30° to 80°C
-22° to 176°F
Low friction
Speed
Excellent wear resistance 1.0m /sec
3.0'/sec

Surface Finish µmRa

ØD
Ød ØD L
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º

C Tolerances
Ød ØD L G
f7 H9 -0 + 0.5 0.25

G/2

Chamfer Radii
L r r
0.20

Typical Examples
Reciprocating Rotary Oscillating Helix

Similar Styles

05/06 14/1
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 2

DI
NR
Pneumatic

S E A L S

Design
Rod seals

DI are designed as an easy to fit low pressure seal and are

manufactured from NBR 90 Shore A. Type DI have a thicker
and longer static sealing lip to form a buffer against axial
movement. To ensure that type DI seals are fitted snugly in
the grooves, they are moulded slightly larger on the heal
outside diameter than the groove size to ensure positive
sealing on the static face whilst maintaining dynamic sealing
lip interference.

Key Features
Light duty Operating Conditions

Rod only Pressure

115 Bar
Low pressure capability 1,500 Psi

Temperature
Dynamic lip reaction
-30° to 100°C
-22° to 212°F
Low friction
Speed
Easy to fit 0.5m /sec
1.5'/sec

Surface Finish µmRa

Ød ØD L
ØD
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º

C
Tolerances
Ød ØD L G
f7 H8 -0 + 0.2 0.25

G/2

Chamfer Radii
L r
C/S 1.5 3.0 5.0 7.5 10
C 1.0 2.0 2.5 3.0 3.0
r 0.2 0.2 0.2 0.2 0.2

Typical Examples
Reciprocating Rotary Oscillating Helix

Similar Styles

14/2 05/06
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 3

U-70
NR
Pneumatic

S E A L S

Design
Rod seals

U-70 type rubber single acting seals are designed for rods or
pistons. Manufactured in NBR 70 Shore A, this type can
handle low pressure applications although predominately
used in pneumatic cylinders, low pressure hydraulic cylinders
can be accommodated. These precision moulded seals have
equally distributed heal clearance and lip to housing
interference. In double acting applications the two seals
should always be in separate grooves and facing away from
one another to avoid a pressure trap.

Key Features
Light duty Operating Conditions

Piston or rod Pressure

16 Bar
Low pressure capability 230 Psi

Temperature
Dynamic lip reaction
-30° to 100°C
-22° to 212°F
Low friction
Speed
Easy to fit 0.5m /sec
1.5'/sec

Surface Finish µmRa

Ød ØD L
ØD
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º

C
Tolerances
Ød ØD L G
f9 Js11 -0 + 0.2 0.25

G/2

Chamfer Radii
L r
C/S 5.0 7.5 10
C 2.5 4.0 5.0
r 0.2 0.4 0.4

Typical Examples
Reciprocating Rotary Oscillating Helix

Similar Styles

05/06 14/3
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 4

U-90
NR
Pneumatic

S E A L S

Design
Rod seals

U-90 type rubber single acting seals are designed for rods or
pistons. Manufactured in NBR 90 Shore A, this type can
handle low to medium pressure applications although
predominately used in pneumatic cylinders, low to medium
pressure hydraulic cylinders can be accommodated. These
precision moulded seals have equally distributed heal
clearance and lip to housing interference. In double acting
applications the two seals should always be in separate
grooves and facing away from one another to avoid a
pressure trap.

Key Features
Light to meduim duty Operating Conditions

Piston or rod Pressure

85 Bar
Dynamic lip reaction 1,250 PSI

Temperature
Low friction
-30° to 100°C
-22° to 212°F
Easy to fit
Speed
0.5m /sec
1.5'/sec

Surface Finish µmRa

ØD Ød L
ØD
0.1 - 0.25 ≤0.8 2.0
C/S Ød
25º

C
Tolerances
ØD Ød L G
f9 Js11 -0 + 0.2 0.25

G/2

Chamfer Radii
L r
C/S 5.0 7.5 10.0
C 2.5 4.0 5.0
r 0.2 0.4 0.4

Typical Examples
Reciprocating Rotary Oscillating Helix

Similar Styles

14/4 05/06
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 5

GSP DIM U70 U90 19M

Bore Dia Hsg Dia Seal Ln Hsg Ln Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød1 L Duro. Product Code ØD Ød1 L Duro. Product Code

3.00 6.00 2.50 3.00 GSP-003006-030 18.00 25.00 4.50 6.00 NBR90 DI-018025-060

4.00 8.00 3.00 3.50 GSP-004008-035 26.00 5.50 6.00 NBR90 DI-018026-060

5.00 9.00 2.50 3.00 GSP-005009-030 26.00 5.50 6.00 GSP-018026-060

6.00 10.00 3.00 3.50 GSP-006010-035 30.00 6.00 6.60 NBR90 U-018030-066

11.00 3.00 3.50 GSP-006011-035 20.00 28.00 4.00 4.50 NBR90 U-020028-045

12.00 4.00 4.50 GSP-006012-045 28.00 5.00 5.70 NBR70 U-020028-057

7.00 13.00 4.00 4.50 GSP-007013-045 28.00 5.50 6.00 GSP-020028-060

8.00 14.00 2.55 3.00 GSP-008014-030 30.00 5.00 5.50 NBR90 U-020030-055
14.00 4.00 4.50 GSP-008014-045 35.00 10.00 11.00 NBR90 U-020035-110

14.00 4.50 5.00 GSP-008014-050 36.00 8.00 9.50 NBR90 U-020036-095

16.00 5.50 7.00 NBR90 DI-008016-070 40.00 10.00 11.00 NBR90 U-020040-110

16.00 6.00 7.50 NBR90 U-008016-075 22.00 28.00 4.30 5.00 GSP-022028-050

10.00 16.00 2.55 3.00 GSP-010016-030 30.00 5.50 6.00 GSP-022030-060

16.00 4.50 5.00 GSP-010016-050 32.00 5.00 5.50 NBR90 U-022032-055

Rod Seals
Pneumatic
18.00 5.50 6.00 GSP-010018-060 42.00 10.00 11.00 NBR90 U-022042-110

12.00 18.00 2.55 3.00 GSP-012018-030 25.00 33.00 5.50 6.00 GSP-025033-060

20.00 4.00 4.50 NBR90 U-012020-045 35.00 7.00 8.50 NBR90 DI-025035-085

20.00 5.50 6.00 GSP-012020-060 35.00 8.00 9.00 NBR90 U-025035-090

22.00 5.00 5.50 NBR90 U-012022-055 42.00 8.00 9.50 NBR90 U-025042-095

24.00 6.00 7.50 NBR90 U-012024-075 50.00 12.00 13.00 NBR90 U-025050-130

24.00 6.00 6.50 GSP-012024-065 28.00 36.00 5.50 6.00 GSP-028036-060

14.00 22.00 4.00 4.50 NBR90 U-014022-045 38.00 7.00 7.50 GSP-028038-075

22.00 5.50 6.00 GSP-014022-060 40.00 6.00 6.60 NBR90 U-028040-066

24.00 5.00 5.50 NBR90 U-014024-055 48.00 10.00 11.00 NBR90 U-028048-110
32.00 10.00 11.50 NBR90 U-014032-115 30.00 38.00 5.50 6.00 GSP-030038-060

15.00 25.00 5.00 5.50 NBR90 U-015025-055 40.00 5.00 5.50 NBR90 U-030040-055

30.00 8.00 9.50 NBR90 U-015030-095 40.00 7.00 7.50 GSP-030040-075

16.00 22.00 2.50 3.00 GSP-016022-030 45.00 10.00 11.00 NBR90 U-030045-110

24.00 5.50 6.00 GSP-016024-060 50.00 10.00 11.00 NBR90 U-030050-110

26.00 5.00 5.50 NBR90 U-016026-055 32.00 40.00 5.50 6.00 GSP-032040-060

32.00 8.00 9.50 NBR90 U-016032-095 42.00 5.00 5.50 NBR90 U-032042-055

36.00 10.00 11.00 NBR90 U-016036-110 42.00 7.00 8.50 NBR90 DI-032042-085

17.00 24.00 2.55 3.00 GSP-017024-030 35.00 43.00 8.00 8.50 GSP-035043-085

05/06 14/5
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 6

C/S ØD

Ød

NR
S E A L S

Bore Dia Hsg Dia Seal Ln Hsg Ln Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød1 L Duro. Product Code ØD Ød1 L Duro. Product Code

35.00 45.00 5.00 5.50 NBR90 U-035045-055 63.00 75.00 8.50 9.50 GSP-063075-095

45.00 6.00 7.00 NBR70 U-035045-070 65.00 77.00 8.50 9.50 GSP-065077-095

45.00 7.00 7.50 GSP-035045-075 85.00 10.00 11.00 NBR90 U-065085-110

50.00 10.00 11.00 NBR90 U-035050-110 90.00 15.00 16.00 NBR70 U-065090-160

55.00 10.00 11.00 NBR90 U-035055-110 70.00 80.00 5.00 5.50 NBR90 U-070080-055

60.00 12.00 13.00 NBR90 U-035060-130 82.00 8.50 9.50 GSP-070082-095

36.00 46.00 7.00 7.50 GSP-036046-075 85.00 7.50 8.30 NBR90 U-070085-083

38.00 48.00 5.00 5.50 NBR90 U-038048-055 90.00 10.00 11.00 NBR90 U-070090-110
50.00 6.00 6.50 NBR90 U-038050-065 75.00 95.00 10.00 11.00 NBR90 U-075095-110

55.00 10.00 11.00 NBR90 DI-038055-110 100.00 15.00 16.00 NBR90 U-075100-160

40.00 48.00 5.50 6.00 GSP-040048-060 80.00 92.00 8.50 9.50 GSP-080092-095

50.00 6.00 7.00 NBR70 U-040050-070 100.00 10.00 11.00 NBR90 U-080100-110

50.00 7.00 7.50 GSP-040050-075 110.00 15.00 16.00 NBR90 U-080110-160

60.00 10.00 11.00 NBR90 U-040060-110 85.00 97.00 8.50 9.50 GSP-085097-095

45.00 55.00 5.00 5.50 NBR70 U-045055-055 100.00 9.00 10.00 NBR90 U-085100-100

55.00 7.00 7.50 GSP-045055-075 105.00 10.00 11.00 NBR90 U-085105-110

65.00 10.00 11.00 NBR90 U-045065-110 110.00 12.00 13.00 NBR90 U-085110-130

48.00 68.00 10.00 11.00 NBR90 U-048068-110 90.00 100.00 5.00 5.50 NBR90 U-090100-055

50.00 60.00 5.00 5.50 NBR90 U-050060-055 102.00 8.50 9.50 GSP-090102-095

60.00 7.00 7.50 GSP-050060-075 105.00 7.50 8.30 NBR90 U-090105-083

70.00 10.00 11.00 NBR90 U-050070-110 110.00 10.00 11.50 NBR90 U-090110-115

55.00 65.00 7.00 7.50 GSP-055065-075 95.00 107.00 8.50 9.50 GSP-095107-095

70.00 7.50 8.30 NBR90 U-055070-083 125.00 15.00 16.00 NBR90 U-095125-160

75.00 10.00 11.00 NBR90 U-055075-110 100.00 115.00 10.00 11.00 GSP-100115-110
80.00 12.00 13.00 NBR90 U-055080-130 120.00 10.00 11.50 NBR90 U-100120-115

56.00 66.00 7.00 7.50 GSP-056066-075 120.00 12.00 13.00 NBR70 U-100120-130

60.00 70.00 5.00 5.50 NBR90 U-060070-055 125.00 12.00 13.00 NBR90 U-100125-130

72.00 8.50 9.50 GSP-060072-095 110.00 130.00 14.00 15.50 NBR90 DI-110130-155

75.00 7.50 8.30 NBR90 U-060075-083 115.00 145.00 12.00 13.00 NBR90 U-115145-130

80.00 10.00 11.00 NBR90 U-060080-110 120.00 140.00 10.00 11.00 NBR90 U-120140-110

90.00 15.00 16.00 NBR75 U-060090-160 150.00 15.00 16.50 NBR90 U-120150-165

90.00 15.00 16.00 NBR90 U-060090-160A 125.00 150.00 18.00 19.00 NBR90 U-125150-190

63.00 73.00 7.00 7.50 GSP-063073-075 130.00 160.00 15.00 16.50 NBR90 U-130160-165

14/6 05/06
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 7

GSP DIM U70 U90 19M

Bore Dia Hsg Dia Seal Ln Hsg Ln

ØD Ød1 L Duro. Product Code

140.00 170.00 15.00 16.50 NBR90 U-140170-165

150.00 180.00 15.00 16.50 NBR90 U-150180-165

160.00 175.00 10.00 11.00 GSP-160175-110

190.00 15.00 16.50 NBR90 U-160190-165

170.00 200.00 15.00 16.50 NBR90 U-170200-165

180.00 210.00 22.00 23.50 NBR90 U-180210-235

210.00 250.00 20.00 21.50 NBR90 U-210250-215

250.00 290.00 20.00 22.00 NBR90 U-250290-220

260.00 300.00 20.00 22.00 NBR90 U-260300-220

Rod Seals
Pneumatic

05/06 14/7
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 8
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 1

RBP
NR
Wiper Combo

S E A L S

Design
Rod seals

RBP are a pneumatic seal-wiper, designed as a combination

asymmetric lip seal with an integral wiper element, and as
such, only requires a single groove and not two grooves as in
the traditional system. The reduction of the overall
dimensions and the execution of a single groove together
with a single polyurethane seal give’s considerable economic
advantages.

Key Features
Lower pressures Operating Conditions

Simple housing design Pressure

16 Bar
Easy to replace 230 Psi

Temperature
Excellent wear resistance
-30° to 80°C
-22° to 176°F
Cost effective
Speed
1.0m /sec
ØD1
3.0'/sec
ØD 2
Surface Finish µmRa
Ød
Ød ØD1 ØD2 L1
0.1 - 0.25 ≤0.8 ≤0.8 2.0

Tolerances
L2
Ød ØD1 ØD2 L1 L2
f7 H10 H11 -0 + 0.15 -0.00 + 0.10
L1 r

Chamfer Radii
r
0.2

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 15/1
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 2

RCA
NR
Wiper Combo

S E A L S

Design
Rod seals

RCA are a self locating pneumatic rod wiper/seal combining

three functions. Keeping contaminates from the system,
maintaining system pressure and self location. RCA may be
used for dry air and air free from oil, after initial lubrication on
assembly. With slight modification to the housing this style
can be replaced without removal of the rod. With favourable
friction values due to the polyurethane material and lip
design, RCA is a simple, complete pneumatic rod solution.

Key Features
Lower pressures Operating Conditions

Simple housing design Pressure

16 Bar
Easy to replace 230 Psi

Temperature
Complete solution
-30° to 80°C
-22° to 176°F
Cost effective
Speed
1.0m /sec
ØD 1 3.0'/sec

ØD
Surface Finish µmRa
ØD Ød L1
Ød 0.1 - 0.25 ≤0.8 2.0
30˚

Tolerances
f
Ød ØD ØD1 L1 L
e9 H10 H10 + 0.15 + 0.25
b
L1 -0.00 -0.00
r
L
Chamfer Radii
as noted in data table

R2.0

Typical Examples
Reciprocating Rotary Oscillating Helix

15/2 05/06
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 3

L1 L2

Ø D1

ØD SL
Ød

RBP

Rod Dia Hsg Dia Ret Dia Hsg Ln Seal Ln Step Wd

Ød ØD1 ØD L1 SL L2 Product Code

3.00 8.80 5.00 4.50 5.20 1.2 RBP-003008-045

4.00 7.00 5.40 2.70 2.80 1.0 RBP-004007-027

8.80 6.00 4.50 5.20 1.2 RBP-004008-045

5.00 8.00 6.20 2.70 2.80 1.0 RBP-005008-027

6.00 9.00 7.20 2.70 2.80 1.0 RBP-006009-027

10.80 8.00 4.50 5.20 1.2 RBP-006010-045

8.00 11.50 9.20 3.00 3.20 1.0 RBP-008011-030

12.80 10.00 4.50 5.20 1.2 RBP-008012-045

14.00 11.00 4.50 5.20 1.2 RBP-008014-045

10.00 14.00 11.40 3.20 3.70 1.0 RBP-010014-032

16.80 13.00 4.50 5.20 1.2 RBP-010016-045

18.00 14.00 5.00 6.00 1.6 RBP-010018-050

12.00 16.50 13.70 3.70 4.00 1.2 RBP-012016-037

18.00 14.50 4.00 4.80 1.2 RBP-012018-040

Wiper Combo
Rod Seals
20.00 16.00 5.00 6.00 1.6 RBP-012020-050
20.00 16.00 5.50 6.50 1.6 RBP-012020-055

22.00 16.00 6.00 6.50 1.5 RBP-012022-060

14.00 18.50 15.70 3.70 4.00 1.2 RBP-014018-037

20.00 16.50 4.00 4.80 1.2 RBP-014020-040

24.00 18.00 6.00 6.50 1.5 RBP-014024-060

16.00 20.50 17.70 3.70 4.00 1.2 RBP-016020-037

22.00 18.50 4.00 5.00 1.2 RBP-016022-040

24.00 18.50 5.00 6.00 1.5 RBP-016024-050

26.00 20.00 6.00 6.50 1.5 RBP-016026-060

18.00 22.50 19.70 3.70 4.00 1.2 RBP-018022-037

24.00 20.50 4.00 5.00 1.4 RBP-018024-040

26.00 21.00 5.00 6.00 1.6 RBP-018026-050

28.00 22.00 6.00 6.50 1.5 RBP-018028-060

20.00 25.00 21.90 4.00 4.60 1.2 RBP-020025-040

26.00 22.50 4.00 4.80 1.2 RBP-020026-040

30.00 24.00 7.00 7.50 1.5 RBP-020030-070

22.00 27.00 23.90 4.00 4.60 1.2 RBP-022027-040

28.00 24.50 4.00 5.00 1.4 RBP-022028-040

05/06 15/3
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 4

L1 L2

NR
Ø D1

ØD SL
Ød

S E A L S

RBP

Rod Dia Hsg Dia Ret Dia Hsg Ln Seal Ln Step Wd

Ød ØD1 ØD L1 SL L2 Product Code

22.00 32.00 26.00 7.00 7.50 1.5 RBP-022032-070

25.00 30.00 26.90 4.00 4.60 1.2 RBP-025030-040

31.00 27.50 4.00 4.80 1.2 RBP-025031-040

33.60 28.00 5.30 6.20 1.5 RBP-025033-053

35.00 29.00 7.00 7.50 1.5 RBP-025035-070

28.00 38.00 32.00 7.00 7.50 1.5 RBP-028038-070

30.00 35.50 32.10 4.55 5.00 1.2 RBP-030035-045

38.00 33.00 5.00 5.80 1.5 RBP-030038-050

40.00 34.00 7.00 7.50 1.5 RBP-030040-070

32.00 37.50 34.10 4.55 5.00 1.2 RBP-032037-045

40.00 35.00 5.00 5.80 1.3 RBP-032040-050

42.00 36.00 7.00 7.50 1.5 RBP-032042-070

35.00 45.00 39.00 7.00 7.50 1.5 RBP-035045-070

36.00 44.00 39.00 5.00 6.00 1.3 RBP-036044-050

46.00 40.00 7.00 7.50 1.5 RBP-036046-070

40.00 50.00 44.00 7.00 7.50 1.5 RBP-040050-070

45.00 53.00 48.00 5.00 6.00 1.3 RBP-045053-050

55.00 49.00 7.00 7.50 1.5 RBP-045055-070

50.00 62.00 55.00 8.50 9.00 2.0 RBP-050062-085

70.00 80.00 75.00 6.00 7.00 1.5 RBP-070080-060

15/4 05/06
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 5

L1

R 2.0 30˚

ØD1
r f ØD

Ød

RCA

Rod Dia Hsg Dia Ret Dia Hsg Seal Ln

Ød ØD ØD1 L1 L b r f B Product Code

12.00 20.00 22.00 13.00 8.80 2.20 1.10 1.50 10.70 RCA-012020-110

22.00 24.00 13.00 8.80 2.20 1.10 1.50 10.70 RCA-012022-110

16.00 26.00 28.00 13.00 8.80 2.20 1.10 1.50 10.70 RCA-016026-110

18.00 26.00 28.00 13.00 8.80 2.20 1.10 1.50 10.70 RCA-018026-110

28.00 30.00 13.00 8.80 2.20 1.10 1.50 10.70 RCA-018028-110

20.00 30.00 32.00 13.00 8.80 2.20 1.10 1.50 10.70 RCA-020030-110

22.00 32.00 34.50 14.00 9.40 2.80 1.40 2.00 11.20 RCA-022032-115
25.00 35.00 37.50 14.00 9.40 2.80 1.40 2.00 11.20 RCA-025035-115

30.00 40.00 42.50 14.00 9.40 2.80 1.40 2.00 11.20 RCA-030040-115

32.00 42.00 44.50 14.00 9.40 2.80 1.40 2.00 11.20 RCA-032042-115

40.00 50.00 52.50 14.00 9.40 2.80 1.40 2.00 11.20 RCA-040050-115

45.00 55.00 58.20 15.00 10.40 3.60 1.80 2.00 12.20 RCA-045055-125

50.00 60.00 63.20 15.00 10.40 3.60 1.80 2.00 12.20 RCA-050060-125

63.00 75.00 78.20 16.00 11.40 3.60 1.80 2.00 13.00 RCA-063075-130

Wiper Combo
Rod Seals

05/06 15/5
NRS294-NR Seals Metric 12 8/30/05 2:27 PM Page 6
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 1

CSW
NR
Rod Wipers

S E A L S

Design
Rod wipers

CSW rod wiper is designed to remove more tenacious mud

and ice from reciprocating rods during the negative stroke.
Classed as a heavy duty scraper, moulded in Nylon (PA) with
a MOS2 filler to improve friction and wear characteristics.
The materials high modulus allow it to aggressively scrape
larger debris from the rod. The sealing lip on the outside
diameter provides positive sealing preventing contamination
entering the cylinder.

Key Features
Heavy duty scraper Operating Conditions

Simple snap-in fit Temperature

-40° to 100°C
Good abrasion resistance -40° to 212°F

Speed
5.0m /sec
15.0'/sec

Surface Finish µmRa

Ød ØD & ØD1 L1
0.1 - 0.25 µmRa ≤ 0.8 µmRa ≤ 3.2 µmRa

ØD

Tolerances
Ø D1
Ød ØD ØD1 L1
Refer seal + 0.20 + 0.20 + 0.20
specs’ for d Dia - 0.00 - 0.00 - 0.00

Chamfer Radii
r2 r1 0.04 mm
r2 1.50 mm
L2
L1 r1

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

05/06 16/1
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 2

DH
NR
Rod Wipers

S E A L S

Design
Rod wipers

DH rod wiper is designed to preclude the ingress of

contaminents into the cylinder as well as assist in sealing
the rod. Manufactured from Polyurethane DH are designed
for closed housings with pre-load on the static diameter
providing stability and sealing.

Key Features
Sealing lip Operating Conditions
ensures a drier rod Temperature
-30° to 100°C
Flexible design -22° to 212°F

Easy installation Speed

3.0m/sec
9.0'/sec

Surface Finish µmRa

Ød ØD & ØD1 L1
ØD 0.1 - 0.25 µmRa ≤ 0.8 µmRa ≤ 3.2 µmRa

Ø D1
Tolerances
Ød ØD ØD1 L1
Refer seal + 0.20 ± 0.1 + 0.30
specs’ for d Dia - 0.00 - 0.00

Chamfer Radii
r1 r2
r2
L1
L2 0.3 0.4
r1

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

16/2 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 3

DSI
NR
Rod Wipers

S E A L S

Design
Rod wipers

DSI rod wiper is a medium to heavy duty type, manufactured

from Polyurethane. This type is proportioned to help remove
tenacious contaminates such as ice and dried mud, from
intruding past either the inside or outside diameters. DSI also
offers very good abrasion resistance and withstands some
sideloading, without detrimental wiping loss.

Key Features
Medium to heavy duty Operating Conditions

Tough polyurethane material Temperature

-30° to 100°C
Easy installation -22° to 212°F

Speed
1.0m/sec
3.0'/sec

Surface Finish µmRa

Ød ØD & ØD1 L1
ØD 0.1 - 0.25 µmRa ≤ 0.8 µmRa ≤ 3.2 µmRa

Ø D1
Tolerances
Ød ØD ØD1 L1
Refer seal + 0.14 ± 0.1 + 0.3
specs’ for d Dia - 0.00 - 0.0

Chamfer Radii
r1 r2
r2 L2 0.3 0.4
L1 r1

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

05/06 16/3
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 4

PW
NR
Rod Wipers

S E A L S

Design
Rod wipers

PW rod wiper is designed to prevent contaminents entering

the system, extending the cylinder sevice life. The sealing
bead on the outside diameter provides positive sealing
preventing contamination entering the cylinder. Most sizes
also have a ribbed inside diameter heel to prevent the
possibility of blow-out due to pressure trapping of the main
seal.

Key Features
Medium duty Operating Conditions

Tough polyurethane material Temperature

-40° to 105°C
Easy installation -40° to 221°F

Speed
Popular European sizes
0.8m/sec
2.5'/sec

Surface Finish µmRa

Ød ØD & ØD1 L1
ØD 0.1 - 0.25 µmRa ≤ 0.8 µmRa ≤ 3.2 µmRa

Ø D1
Tolerances
Ød ØD ØD1 L1
Refer seal + 0.20 + 0.20 + 0.10
specs’ for d Dia - 0.00 - 0.00 - 0.00

Chamfer Radii
r1 r2
r2 L2
L1 r1 0.3 0.4

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

16/4 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 5

PWF
NR
Rod Wipers

S E A L S

Design
Rod wipers

PWF rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. Moulded from
Polyurethane the outside step is carefully calculated
to provide assembly pre-load creating perfect protection
against water and other impurities entering the cylinder.
Most sizes also have a ribbed inside diameter heel to
prevent the possibility of blow-out due to pressure trapping
of the main seal.

Key Features
Compact design Operating Conditions

Easy installation Temperature

-40° to 105°C
Pre-loaded fit for -40° to 221°F

effective sealing Speed

0.8m/sec
2.5'/sec

Surface Finish µmRa

Ød ØD & ØD1 L1
0.1 - 0.25 µmRa ≤ 0.8 µmRa ≤ 3.2 µmRa
ØD

Ø D1 Tolerances
Ød ØD ØD1 L1
Refer seal ± 0.10 ± 0.10 + 0.10
specs’ for d Dia - 0.00

Chamfer Radii
h r1 r2
r2 0.4 0.2
L2
L1 r1

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

05/06 16/5
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 6

PWM
NR
Rod Wipers

S E A L S

Design
Rod wipers

PWM rod wiper is a light-medium duty wiper manufactured

from a hard Nitrile rubber .The wiper is proportioned to
prevent mud and mositure from entering the system.

Key Features
Key features Operating Conditions

Light to medium duty Temperature

-30° to 100°C
Easy installation -22° to 212°F

Speed
Flexible design
3.0m/sec
9.0'/sec

Surface Finish µmRa

Ød ØD ØD1 L1
0.1-0.25 ≤ 0.8 1.0 2.0
ØD

Ø D1
Tolerances
Ød ØD ØD1 L1
Refer seal + 0.2 + 0.2 + 0.2
specs’ for d Dia - 0.0 - 0.0 - 0.0

Chamfer Radii
r1 r2
r2 L2
0.4 0.2
L1 r1

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

16/6 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 7

PWS
NR
Rod Wipers

S E A L S

Design
Rod wipers

PWS rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. A medium duty wiper
moulded from NBR 90 Shore A. The wiper is machine
trimmed to provide a precise wiping lip. The sealing beads
on the outside diameter & heel provide positive sealing
preventing contamination entering the cylinder.

Key Features
Easy installation Operating Conditions

Sealing beads Temperature

-30° to 100°C
ensures a drier rod -22° to 212°F

Flexible design Speed

3.0m/sec
9.0'/sec

Surface Finish µmRa

Ød ØD & ØD1 L1
0.1 - 0.25 µmRa ≤ 0.8 µmRa ≤ 2.0 µmRa
ØD

ØD1 Tolerances
Ød Ød ØD ØD1 L1
Refer seal + 0.2 + 0.2 + 0.2
specs’ for d Dia - 0.0 - 0.0 - 0.0

Chamfer Radii
r1
L2 30˚ 0.2
L1
r1

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 16/7
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 8

RBP
NR
Rod Wipers

S E A L S

Design
Rod wipers

RBP pneuematic rod seal & wiper combination is designed

to preclude the ingress of contaminents into the cylinder as
well as maintaining effective pnuematic primary rod sealing.
Manufactured from Polyurethane 84 Shore A especially
blended for pnuematic applications designed for closed
housings with pre-load on the static diameter providing
stability and sealing.

Key Features
Long service life Operating Conditions

Excellent abrasion Temperature

-30° to 80°C
resistance -22° to 176°F

Ideal for non-lubricated Speed

1.0m/sec
systems
3.0'/sec

Surface Finish µmRa

Ød ØD ØD1 L1
0.1 - 0.25 1.0 2.0 2.0
ØD

ØD1 Tolerances
Ød ØD ØD1 L1
Refer seal H10 H11 + 0.15
specs’ for d Dia - 0.00

Chamfer Radii
r1 r2
0.2 0.4
r2 L2
L1 r1

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

16/8 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 9

RCA
NR
Rod Wipers

S E A L S

Design
Rod wipers

RCA self-locating pneumatic rod wiper / seal combination,

performs three functions, sealing, wiping and fixing. Moulded
from Polyurethane 84 Shore A especially blended for
pneumatic applications. Can be used in non-lubricated dry
air systems.

Key Features
Long service life Operating Conditions

Excellent abrasion Pressure

16 Bar
resistance 230 Psi

Self locating, no circlip Temperature

-30° to 80°C
required -22° to 176°F

Speed
1.0m/sec
ØD1 3.0'/sec

Surface Finish µmRa

ØD
Ød ØD ØD1 L1
Ød 0.1 - 0.25 0.8 0.8 2.0
30˚

Tolerances
f
Ød ØD ØD1 L L1
Refer seal H10 H10 +0.25 + 0.15
b specs’ for d Dia
L1
r
L Chamfer Radii
refer to RCA in section 15

R2.0

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 16/9
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 10

RTI
NR
Rod Wipers

S E A L S

Design
Rod wipers

RTI rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. The ribbed inside
diameter heel prevents the possibility of blow-out due to
pressure trapping of the main seal. This style is popular in
hoist cylinders due to the compact shape.

Key Features
Medium duty Operating Conditions

Easy installation Temperature

-40° to 105°C
European sizes -40° to 221°F

Speed
0.8m/sec
2.5'/sec

Surface Finish µmRa

Ød ØD & ØD1 L1
ØD 0.1 - 0.25 µmRa ≤ 0.8 µmRa 2.0 µmRa

ØD1
Tolerances
Ød ØD ØD1 L1
Refer seal H10 ±0.10 + 0.2
specs’ for d Dia - 0.0

Chamfer Radii
r1 r2
r2
L1 r1 0.4 0.2
L2

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

16/10 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 11

RTL
NR
Rod Wipers

S E A L S

Design
Rod wipers

RTL rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. The ribbed inside
diameter heel prevents the possibility of blow-out due to
pressure trapping of the main seal. This style is popular in
hoist cylinders due to the compact shape.

Key Features
Medium Duty Operating Conditions

Easy Installation Temperature

-40° to 105°C
European sizes -40° to 221°F

Speed
0.8m/sec
2.5'/sec

Surface Finish µmRa

Ød ØD & ØD1 L1
ØD 0.1 - 0.25 µmRa ≤ 0.8 µmRa 3.2 µmRa

ØD 1
Tolerances
Ød ØD ØD1 L1
Refer seal H10 ± 0.10 + 0.2
specs’ for d Dia - 0.0

Chamfer Radii
r1 r2
r2
L1 r1 0.4 0.2
L2

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

05/06 16/11
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 12

SDK
NR
Rod Wipers

S E A L S

Design
Rod wipers

SDK rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life.
Retro fit only. Very popular in cylinders on truck mounted
cranes.

Operating Conditions

Temperature
-30° to 100°C
-22° to 212°F

Speed
1.0m/sec
3.0'/sec

Surface Finish µmRa

Ød ØD ØD1 L1
ØD 0.1 - 0.25 µmRa 1.6 2.0 3.2 µmRa

ØD 1
Tolerances
Ød ØD ØD1 L1
Refer seal H11 H11 0.1
specs’ for d Dia

Chamfer Radii
r1 r2
r1 r2
0.5 0.3
L2
L1

r1
Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

16/12 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 13

WTN
NR
Rod Wipers

S E A L S

Design
Rod wipers

WTN rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. Standard construction is
Virgin PTFE and NBR 70 Shore A o-ring. WTN type offers high
speed capability up to 15m/s. Due to the low co-efficiency of
friction there’s no stick, slip effect. Simply by changing the
o-ring material a high temperature wiper is achieved.

Key features
Very abrasion resistant Operating Conditions

No stick - slip effect Temperature

-30° to 120°C
Small installation space -22° to 250°F

Speed
Higher speed capability
15.0m/sec
50.0'/sec

Surface Finish µmRa

Ød ØD & ØD1 L1
ØD 0.1 - 0.25 µmRa ≤ 0.8 µmRa ≤ 3.2 µmRa

ØD 1
Tolerances
Ød ØD ØD1 L1
Refer seal H9 + 0.20 + 0.20
specs’ for d Dia - 0.00 - 0.00

Chamfer Radii

r2
r1 r2
L2
L1 r1 0.5 0.3

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

05/06 16/13
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 14

WTV
NR
Rod Wipers

S E A L S

Design
Rod wipers

WTV rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. Standard construction
is Virgin PTFE and Viton 70 Shore A o-ring. WTV offers high
speed capability up to 15m/s without the effects of stick slip,
due to the materials low co-efficient of friction.

Key Features
Very abrasion resistant Operating Conditions

No stick - slip effect Temperature

-20° to 200°C
Higher speed capability -4º to 392ºC

Speed
Higher temperatures
15.0m/sec
50.0'/sec

Surface Finish µmRa

Ød ØD & ØD1 L1
ØD 0.1 - 0.25 µmRa ≤ 0.8 µmRa ≤ 2.0 µmRa

ØD1
Tolerances
Ød ØD ØD1 L1
Refer seal H9 + 0.2 + 0.2
specs’ for d Dia - 0.0 - 0.0

Chamfer Radii

r2
r1 r2
L1 L2 0.5 0.3
r1

Typical Examples
Reciprocating Rotary Oscillating Helix

Ød

16/14 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 15

DKB
NR
Rod Wipers

S E A L S

Design
Rod wipers

DKB rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. A rust inhibitor coated
metal cased wiper designed to press-fit into an open
housing, the wiper and sealing lips are moulded in NBR 80
Shore A with precision trimmed lips bonded to the metal
case.The sealing lip assists sealing by collecting the fluid film
on the positive stroke.

Key Features
Simple housing design Operating Conditions

Medium duty Temperature

-30° to 105°C
Asian sizes -22° to 220°F

Speed
3.0m/sec
9.0'/sec

Surface Finish µmRa

Ød ØD L1
0.1 - 0.25 µmRa ≤ 12.5 ≤ 3.2 µmRa
ØD

Ød Tolerances
Ød ØD L1
Refer seal H8 + 0.3 – 0
0.5m m
@30º specs’ for d Dia

Chamfer Radii
r1 C
L1 L2
r1 0.3 0.5 @ 30º

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 16/15
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 16

DKBI
NR
Rod Wipers

S E A L S

Design
Rod wipers

DKBI rod wiper is designed to prevent contaminents entering

the cylinder, extending the sevice life. A rust inhibitor coated
metal cased wiper designed to press-fit into an open
housing, the wiper and sealing lips are moulded from a tough
Polyurethane with precision trimmed lips bonded to the metal
case. The sealing lip assists sealing by collecting the fluid
film on the positive stroke.

Key Features
Simple housing design Operating Conditions

Medium duty Temperature

-30° to 105°C
Asian sizes -22° to 220°F

Speed
3.0m/sec
9.0'/sec

Surface Finish µmRa

Ød ØD L1
0.1 - 0.25 µmRa ≤ 12.5 ≤ 3.2 µmRa
ØD

Ød Tolerances
Ød ØD L1
Refer seal H8 + 0.2
0.5mm
@ 3 0º specs’ for d Dia - 0.0

Chamfer Radii
r1 C
L1 L2
r1 0.3 0.5 @ 30º

Typical Examples
Reciprocating Rotary Oscillating Helix

16/16 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 17

DKI
NR
Rod Wipers

S E A L S

Design
Rod wipers

DKI rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. A rust inhibitor coated
metal cased wiper designed to press-fit into an open
housing, the wiper is moulded from a tough Polyurethane
with precision trimmed wiping lip bonded to the metal case.

Key Features
Simple housing design Operating Conditions

Medium duty Temperature

-30° to 105°C
Asian sizes -22° to 220°F

Speed
3.0m/sec
9.0'/sec

Surface Finish µmRa

Ød ØD L1
0.1 - 0.25 µmRa ≤ 12.5 ≤ 3.2 µmRa
ØD

Ød Tolerances
Ød ØD L1
Refer seal H8 + 0.2
0.5m m
@30º specs’ for d Dia - 0.0

Chamfer Radii
r1 C
L1 L2
r1 0.3 0.5 @ 30º

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 16/17
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 18

DKIY
NR
Rod Wipers

S E A L S

Design
Rod wipers

DKIY rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. A rust inhibitor coated
metal cased wiper designed to press-fit into an open
housing, the wiper is moulded from a tough Polyurethane
with precision trimmed wiping lip bonded to the metal case.
The wiper is also suitable for the retention of grease when
fitted to pivot pins.

Key Features
Simple housing design
Medium duty Temperature
-30° to 105°C
Asian & European sizes -22° to 220°F

Speed
3.0m/sec
9.0'/sec

Surface Finish µmRa

Ød ØD L1
0.1 - 0.25 µmRa ≤ 12.5 ≤ 3.2 µmRa

ØD

Tolerances
Ød
Ød ØD L1
Refer seal H8 + 0.2
specs’ for d Dia - 0.0
0.5mm
@ 3 0º Chamfer Radii
r1 C
0.3 0.5 @ 30º
r1
L1 L2

Typical Examples
Reciprocating Rotary Oscillating Helix

16/18 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 19

MCR
NR
S E A L S
Rod Wipers

Design
Rod wipers

MCR rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. A metal cased wiper
designed to press-fit into an open housing, the wiper is
moulded in NBR 85 Shore A with precision trimmed wiping
lip bonded to the metal case.

Key Features
Simple housing design Operating Conditions

Temperature
Medium duty
-30° to 105°C
European sizes -22° to 220°F

Speed
3.0m/sec
9.0'/sec

Surface Finish µmRa

Ød ØD L1
0.1 - 0.25 µmRa ≤ 12.5 ≤ 3.2 µmRa
ØD

Ød Tolerances
Ød ØD L1
Refer seal H8 + 0.2
0.5m m
@30º
specs’ for d Dia - 0.0

Chamfer Radii
r1 C
L1 L2
r1 0.3 0.5 @ 30º

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 16/19
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 20

MCU
NR
Rod Wipers

S E A L S

Design
Rod wipers

MCU rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. A rust inhibitor coated
metal cased wiper designed to press-fit into an open
housing, the wiper is moulded from a tough Polyurethane
with precision trimmed wiping lip bonded to the metal case.

Key Features
Simple housing design Operating Conditions

Medium duty Temperature

-30° to 105°C
Asian & European sizes -22° to 220°F

Speed
3.0m/sec
9.0'/sec

Surface Finish µmRa

Ød ØD L1
0.1 - 0.25 µmRa ≤ 12.5 ≤ 3.2 µmRa
ØD

Ød Tolerances
Ød ØD L1
Refer seal H8 + 0.2
0.5mm
@30º specs’ for d Dia - 0.0

Chamfer Radii
r1 C
L1 L2
r1 0.3 0.5 @ 30º

Typical Examples
Reciprocating Rotary Oscillating Helix

16/20 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 21

MPW
NR
Rod Wipers

S E A L S

Design
Rod wipers

MPW rod wiper is designed to prevent contaminents entering

the cylinder extending the sevice life. A metal cased wiper
designed to press-fit into an open housing, the wiper is
moulded in NBR 80 shore A with precision trimmed wiping lip
bonded to the metal case.
These wipers are sized to suit cylinder pin eye housings.

Key Features
Compact design Operating Conditions

Ideal pin grease seal Temperature

-30° to 105°C
Asian sizes -22° to 220°F

Speed
3.0m/sec
9.0'/sec

Surface Finish µmRa

Ød ØD L1
0.1 - 0.25 µmRa ≤ 12.5 ≤ 3.2 µmRa
ØD

Tolerances
Ød
Ød ØD L1
Refer seal H8 + 0.2
specs’ for d Dia - 0.0
0.5m m
@30º Chamfer Radii
r1 C
0.3 0.5 @ 30º
r1
L1 L2

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 16/21
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 22

16/22 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 23

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

3.00 8.80 5.00 4.50 5.20 1.20 A RBP-003008-045

4.00 7.00 5.40 2.70 2.80 1.00 A RBP-004007-027

8.80 6.00 4.50 5.20 1.20 A RBP-004008-045

12.00 10.00 4.00 7.00 1.00 A PWF-004012-040

12.00 9.00 3.00 5.00 A 015047 PW-004012-030

5.00 8.00 6.20 2.70 2.80 1.00 A RBP-005008-027

12.00 9.00 2.80 5.00 A 019047 PW-005012-028

6.00 9.00 7.20 2.70 2.80 1.00 A RBP-006009-027

10.80 8.00 4.50 5.20 1.20 A RBP-006010-045

12.00 9.00 3.00 5.00 A 023047 PW-006012-030

8.00 11.50 9.20 3.00 3.20 1.00 A RBP-008011-030

12.80 10.00 4.50 5.20 1.20 A RBP-008012-045

12.80 10.70 3.70 3.70 A WTN-008012-037

12.80 10.70 3.70 3.70 A WTV-008012-037

14.00 11.00 4.50 5.20 1.20 A RBP-008014-045

14.60 11.00 3.80 5.00 A 031057 PW-008014-038

16.00 14.00 4.00 7.00 1.00 A PWF-008016-040

9.00 13.00 12.00 2.50 4.50 A 035061 PW-009013-025

10.00 14.00 11.40 3.20 3.70 1.00 A RBP-010014-032

14.80 12.70 3.70 3.70 A WTN-010014-037

14.80 12.70 3.70 3.70 A WTV-010014-037

15.00 13.00 1.00 3.00 A 039059 PW-010015-010

Rod Wipers

16.60 13.00 3.80 5.00 A 039065 PW-010016-038

Wipers

16.80 13.00 4.50 5.20 1.20 A RBP-010016-045

18.00 16.00 4.00 7.00 1.00 A PWF-010018-040

18.00 14.00 5.00 6.00 1.60 A RBP-010018-050

20.00 5.00 8.00 C 039078 MCR-010020-050

JIS 20.00 5.00 7.00 C DKI 10 DKI-010020-050

JIS 11.20 19.20 15.50 5.00 6.00 A DH 11.2 DH-011019-050

JIS 21.00 5.00 7.00 C DKI 11.2 DKI-011021-050

12.00 16.50 13.70 3.70 4.00 1.20 A RBP-012016-037

18.00 14.50 4.00 4.80 1.20 A RBP-012018-040

18.60 15.00 3.80 5.00 A 047070 PW-012018-038

05/06 16/23
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 24

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

12.00 18.80 15.50 5.00 5.00 A WTN-012018-050

18.80 15.50 5.00 5.00 A WTV-012018-050

20.00 18.00 4.00 7.00 1.00 A PWF-012020-040

20.00 16.00 5.50 6.00 1.60 A RBP-012020-050

20.00 16.00 5.50 6.50 1.60 A RBP-012020-055

20.00 22.00 8.80 13.00 RCA-012020-110

20.00 4.00 6.00 C 047078 MCR-012020-040

22.00 16.00 6.00 6.50 1.50 A RBP-012022-060

22.00 24.00 8.80 13.00 RCA-012022-110

JIS 23.00 5.00 7.00 C DKH 12 DKH-012023-050

JIS 12.50 23.00 5.00 7.00 C DKI 12.5 DKI-012023-050

13.00 19.60 16.00 3.80 5.00 A 051074 PWM-013019-038

14.00 18.50 15.70 3.70 4.00 1.20 A RBP-014018-037

20.00 16.50 4.00 4.80 1.20 A RBP-014020-040

20.60 17.00 3.80 5.00 A 055078 PW-014020-038

20.80 17.50 5.00 5.00 A WTN-014020-050

20.80 17.50 5.00 5.00 A WTV-014020-050

22.00 20.00 4.00 7.00 1.00 A PWF-014022-040

JIS 22.00 18.30 5.00 6.00 A DH 14 DH-014022-050

24.00 18.00 6.00 6.50 1.50 A RBP-014024-060

20.00 3.50 5.00 C 055078 MCR-014020-035

22.00 3.00 4.00 C 055086 MCR-014022-030

22.00 5.00 6.00 C 055086 MCR-014022-050

JIS 24.00 5.00 7.00 C DKB 14 DKB-014024-050

15.00 21.60 18.00 3.80 5.00 A 058082 PW-015021-038

21.80 18.50 5.00 5.00 A WTN-015021-050

21.80 18.50 5.00 5.00 A WTV-015021-050

23.00 21.00 4.00 7.00 1.00 A PWF-015023-040

27.00 24.00 5.00 7.00 A 059106 PW-015027-050

21.00 5.00 5.00 C MCU-015021-050

JIS 25.00 5.00 7.00 C DKB 15 DKB-015025-050

16.00 20.50 17.70 3.70 4.00 1.20 A RBP-016020-037

22.00 18.50 4.00 5.00 1.20 A RBP-016022-040

16/24 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 25

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

16.00 22.50 19.00 3.00 5.00 A 062087 PW-016022-030

22.60 19.00 3.80 5.00 A 062087 PW-016022-038

22.80 19.50 5.00 5.00 A WTN-016022-050

22.80 19.50 5.00 5.00 A WTV-016022-050

24.00 22.00 4.00 7.00 1.00 A PWF-016024-040

JIS 24.00 20.30 5.00 6.00 A DH 16 DH-016024-050

24.00 18.50 5.00 6.00 1.50 A RBP-016024-050

26.00 24.50 4.50 6.50 A 67-16 CSW-016026-045

26.00 20.00 6.00 6.50 1.50 A RBP-016026-060

26.00 28.00 8.80 13.00 RCA-016026-110

22.00 3.00 4.00 C 063086 MCR-016022-030

22.00 4.00 5.00 C MCU-016022-040

26.00 5.00 8.00 C 063102 MCR-016026-050

17.00 23.60 20.00 3.80 5.00 A 066094 PW-017023-038

23.60 20.00 3.80 5.30 A 066094 PWM-017023-038

25.00 23.00 4.00 7.00 1.00 A PWF-017025-040

18.00 26.00 24.00 4.00 7.00 1.00 A PWF-018026-040

22.50 19.70 3.70 4.00 1.20 A RBP-018022-037

ISO 24.00 21.00 4.00 7.00 A RSW 18 DH-018024-040

24.00 20.50 4.00 5.00 1.40 A RBP-018024-040

24.60 21.00 3.80 5.00 A 070094 PW-018024-038

24.80 21.50 5.00 5.00 A WTN-018024-050

Rod Wipers

24.80 21.50 5.00 5.00 A WTV-018024-050

Wipers

JIS 26.00 22.30 5.50 6.00 A DH 18 DH-018026-050

26.00 21.00 5.00 6.00 1.60 A RBP-018026-050

26.00 28.00 8.80 13.00 RCA-018026-110

28.00 22.00 5.50 8.00 A ASR 18 DH-018028-050

28.00 22.00 6.00 6.50 1.50 A RBP-018028060

24.00 4.50 7.00 C 070094 MCR-018024-045

28.00 30.00 8.80 13.00 RCA-018028-110

28.00 5.00 7.00 C 070110 MCR-018028-050

28.00 7.00 10.00 C 070110 MCR-018028-070

JIS 30.00 6.00 9.00 C DKB 18 DKB-018030-060

05/06 16/25
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 26

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

JIS 18.00 30.00 6.00 9.00 C DKI 18 DKI-018030-060

19.00 28.60 22.00 5.30 7.00 A 074110 PW-019028-053

JIS 31.00 6.00 9.00 C DKB 19 DKB-019031-060

20.00 25.00 21.90 4.00 4.60 1.20 A RBP-020025-040

26.00 23.00 3.40 5.00 A 078102 PW-020026-034

26.00 22.50 4.00 4.80 1.20 A RBP-020026-040

26.80 23.50 5.00 5.00 A WTN-020026-050

26.80 23.50 5.00 5.00 A WTV-020026-050

JIS 28.00 24.30 5.00 6.00 A DH 20 DH-020028-050

28.00 26.00 4.00 7.00 1.00 A PWF-020028-040

28.60 23.00 5.30 7.00 A 078110 PW-020028-053

30.00 27.00 5.40 7.00 A 078118 PW-020030-054

30.00 24.00 7.00 7.50 1.50 A RBP-020030-070

30.00 32.00 8.80 13.00 RCA-020030-110

33.00 31.50 6.00 8.50 A 67-20 CSW-020033-060

28.00 3.50 5.00 C 078110 MCR-020028-035

28.00 7.00 10.00 C 078110 MCR-020028-070

30.00 4.00 6.00 C 078118 MCR-020030-040

30.00 5.00 8.00 C 078118 MCR-020030-050

30.00 7.00 10.00 C 078118 MCR-020030-070

JIS 32.00 6.00 9.00 C DKB 20 DKB-020032-060

35.00 7.00 10.00 C 078137 MCR-020035-070

22.00 27.00 23.90 4.00 4.60 1.20 A RBP-022027-040

28.00 24.50 4.00 5.00 1.40 A RBP-022028-040

JIS 28.00 24.50 4.00 7.00 A DH-022028-040

28.80 25.50 5.00 5.00 A WTN-022028-050

28.80 25.50 5.00 5.00 A WTV-022028-050

30.00 28.00 4.00 7.00 1.00 A PWF-022030-040

JIS 30.00 26.30 5.00 6.00 A DH 22 DH-022030-050A

30.60 25.00 2.20 4.00 A 086118 PW-022030-022

30.60 25.00 5.30 7.00 A 086118 PW-022030-053

32.00 26.00 7.00 7.50 1.50 A RBP-022032-070

32.00 34.50 9.40 14.00 RCA-022032-115

16/26 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 27

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

22.00 28.00 5.00 9.00 C 086110 MCR-022028-050

JIS 32.00 6.00 9.00 C DKB-022032-060

32.00 5.00 7.00 C 086125 MCR-022032-050

32.00 7.00 10.00 C 086125 MCR-022032-070

JIS 34.00 6.00 9.00 C DKB 22 DKB-022034-060

35.00 5.00 8.00 C 086137 MCR-022035-050

JIS 22.40 30.40 26.70 5.00 6.00 A DH 22.4 DH-022030-050

23.00 31.00 29.00 4.00 7.00 1.00 A PWF-023031-040

JIS 23.50 31.50 27.80 5.00 6.00 A DH 23.5 DH-023031-050

24.00 32.00 30.00 4.00 7.00 1.00 A PWF-024032-040

32.60 27.00 2.20 4.00 A 094125 PW-024032-022

32.60 27.00 5.30 7.00 A 094125 PW-024032-053

32.00 5.00 7.00 C 094125 MCR-024032-050

25.00 30.00 26.90 4.00 4.60 1.20 A RBP-025030-040

31.00 27.50 4.00 4.80 1.20 A RBP-025031-040

31.80 28.50 5.00 5.00 A WTN-025031-050

31.80 28.50 5.00 5.00 A WTV-025031-050

32.50 27.90 1.60 3.00 A SDK-025032-016

33.00 31.00 4.00 7.00 1.00 A PWF-025033-040

JIS 33.00 29.30 5.00 6.00 A DH 25 DH-025033-050

33.00 29.00 4.00 6.00 A 098129 PWM-025033-040

33.60 28.00 5.30 7.00 A 098129 PW-025033-053

Rod Wipers

33.60 28.00 5.30 6.20 1.50 A RBP-025033-053

Wipers

34.00 32.00 5.30 11.00 1.00 A PWF-025034-053

35.00 29.00 7.00 8.00 A ASR 25 DH-025035-070A

35.00 29.00 7.00 7.50 1.50 A RBP-025035-070

35.00 37.50 9.40 14.00 RCA-025035-115

JIS 37.00 31.00 6.00 7.70 3.00 A SCK 25 SCK-025037-060

38.00 36.50 6.00 8.50 A 67-25 CSW-025038-060

31.00 5.00 7.00 C 098122 MCR-025031-050

32.00 7.00 7.00 C MCU-025032-070

34.00 6.90 9.00 C 098133 MCR-025034-069

35.00 5.00 8.00 C 098137 MCR-025035-050

05/06 16/27
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 28

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

25.00 35.00 7.00 10.00 C 098137 MCR-025035-070

JIS 37.00 6.00 9.00 C DKB 25 DKB-025037-060

JIS 37.00 6.00 9.00 C DKI 25 DKI-025037-060

JIS 37.00 6.00 9.00 C DKBI 25 DKBI-025037-060

38.00 7.50 7.50 C MCU-025038-075

JIS 42.00 6.00 9.00 C DKB 25A DKB-025042-060

34.00 32.00 4.00 7.00 1.00 A PWF-026034-040

35.00 29.00 5.00 7.00 A 102137 PW-026035-050

JIS 27.00 39.00 6.00 9.00 C DKI 27 DKI-027039-060

28.00 34.80 31.50 5.00 5.00 A WTN-028034-050

34.80 31.50 5.00 5.00 A WTV-028034-050

36.00 34.00 4.00 7.00 1.00 A PWF-028036-040

JIS 36.00 32.30 5.00 6.00 A DH 28 DH-028036-050

36.00 31.00 5.30 7.00 A 110141 PWM-028036-040

36.60 31.00 5.30 7.00 A 110141 PW-028036-053

38.00 32.00 7.00 7.50 1.50 A RBP-028038-070

41.00 39.50 6.00 8.50 A 67-28 CSW-028041-060

38.00 5.00 8.00 C 110149 MCR-028038-050

38.00 7.00 10.00 C 110149 MCR-028038-070

40.00 7.00 10.00 C 110157 MCR-028040-070

JIS 40.00 6.00 9.00 C DKB 28 DKB-028040-060

JIS 40.00 6.00 9.00 C DKI 28 DKI-028040-060

30.00 35.50 32.10 4.55 5.00 1.20 A RBP-030035-045

36.80 33.50 5.00 5.00 A WTN-030036-050

36.80 33.50 5.00 5.00 A WTV-030036-050

37.50 32.90 1.60 3.00 A SDK-030037-016

38.00 36.00 4.00 7.00 1.00 A PWF-030038-040

JIS 38.00 34.00 6.00 6.50 A DH 30 DH-030038-060

38.00 33.00 5.00 5.80 1.50 A RBP-030038-050

38.60 33.00 5.30 7.00 A 118149 PW-030038-053

40.00 34.50 3.00 5.00 A 118157 PW-030040-030

40.00 35.00 5.30 7.00 A 118157 PW-030040-053

40.00 34.00 7.00 7.50 1.50 A RBP-030040-070

16/28 05/06
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 29

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

30.00 40.00 42.50 9.40 14.00 RCA-030040-115

JIS 42.00 36.00 6.00 9.00 A 118165 PWM-030042-060

43.00 41.50 6.00 8.50 A 67-30 CSW-030043-060

40.00 5.00 8.00 C 118157 MCR-030040-050

40.00 7.00 10.00 C 118157 MCR-030040-070

40.00 4.00 4.00 C MCU-030040-040

JIS 42.00 6.00 9.00 C DKB 30 DKB-030042-060

JIS 42.00 6.00 9.00 C DKI 30 DKI-030042-060

JIS 42.00 6.00 9.00 C DKIY 30 DKIY-030042-060

42.00 36.00 6.00 7.70 3.00 A SCK 30 SCK-030042-060

43.00 7.50 7.50 C MCU-030043-075

JIS 45.00 6.00 9.00 C DKB 30A DKB-030045-060

JIS 47.00 6.00 9.00 C DKB 30 DKB-030047-060

JIS 47.00 7.00 10.00 C DKB 30B DKB-030047-070

JIS 50.00 9.60 12.60 C DKB 30C DKI-030050-096

31.00 39.60 34.00 5.30 7.00 A 122157 PW-031039-053

JIS 31.50 39.50 35.50 6.00 6.50 A DH 31.5 DH-031039-060

JIS 44.00 7.00 10.00 C DKI 31.5 DKI-031044-070

32.00 37.50 34.10 4.55 5.00 1.20 A RBP-032037-045

38.80 35.50 5.00 5.00 A WTN-032038-050

38.80 35.50 5.00 5.00 A WTV-032038-050

39.50 34.90 1.60 3.00 A SDK-032039-016

Rod Wipers

40.00 38.00 4.00 7.00 1.00 A PWF-032040-040

Wipers

JIS 40.00 36.00 6.00 6.50 A DH 32 DH-032040-060

40.00 35.00 3.70 5.00 A 125157 PW-032040-037

40.00 35.00 5.00 5.80 1.30 A RBP-032040-050

42.00 36.00 7.00 7.50 1.50 A RBP-032042-070

42.00 44.50 9.40 14.00 RCA-032042-115

45.00 43.50 6.00 8.50 A 67-32 CSW-032045-060

40.00 4.00 7.00 C 125157 MCR-032040-040

42.00 5.00 7.00 C 125165 MCR-032042-050

42.00 7.00 10.00 C 125165 MCR-032042-070

JIS 44.00 7.00 10.00 C DKB 32 DKB-032044-070

05/06 16/29
NRS294-NR Seals Metric 16 8/30/05 2:23 PM Page 30

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

32.00 45.00 4.00 8.00 C 125177 MCR-032045-040

45.00 5.00 7.00 C 125177 MCR-032045-050

45.00 7.00 10.00 C 125177 MCR-032045-070

JIS 52.00 8.00 11.00 C DKBI 32 DKBI-032052-080

33.00 40.50 35.90 1.60 3.00 A SDK-033040-016

41.60 36.00 5.30 7.00 A 129165 PWM-033041-053

43.00 7.00 10.00 C MCU-033043-070

JIS 34.00 46.00 7.00 10.00 C DKI 34 DKI-034046-070

35.00 40.00 37.00 3.70 6.00 A 137157 PW-035040-037

41.80 38.50 5.00 5.00 A WTN-035041-050

41.80 38.50 5.00 5.00 A WTV-035041-050

42.50 37.90 1.60 3.00 A SDK-035042-016

43.00 41.00 4.00 7.00 1.00 A PWF-035043-040

JIS 43.00 39.00 6.00 6.50 A DH 35 DH-035043-060

43.60 38.00 5.30 7.00 A 137169 PW-035043-053

45.00 39.00 4.00 6.00 A 137177 PW-035045-040

45.00 39.00 7.00 7.50 1.50 A RBP-035045-070

45.00 5.00 8.00 C 137177 MCR-035045-050

45.00 7.00 10.00 C 137177 MCR-035045-070

45.00 4.00 4.00 C MCU-035045-040

JIS 45.00 6.00 6.00 C DKIY 35 DKIY-035045-060

JIS 47.00 7.00 10.00 C DKB 35 DKB-035047-070

JIS 47.00 7.00 10.00 C DKI 35 DKI-035047-070

JIS 47.00 7.00 10.00 C DKBI 35 DKBI-035047-070

JIS 47.00 7.00 C DKIY 35 DKIY-035047-070

JIS 47.00 41.00 7.00 8.70 3.00 A SCK 35 SCK-035047-070

50.00 7.50 7.50 C MCU-035050-075

52.00 7.00 10.00 C 137204 MCR-035052-070

JIS 35.50 43.50 39.50 6.00 6.50 A DH 35.5 DH-035043-060A

JIS 47.50 7.00 10.00 C DKI 35.5 DKI-035047-070A

36.00 42.80 39.50 5.00 5.00 A WTN-036042-050

42.80 39.50 5.00 5.00 A WTV-036042-050

44.00 42.00 4.00 7.00 1.00 A PWF-036044-040

16/30 05/06
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 31

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

36.00 44.00 39.00 5.00 6.00 1.30 A RBP-036044-050

JIS 44.00 44.00 5.30 8.00 A DH 36 DH-036044-050

44.60 39.00 5.30 7.00 A 141173 PW-036044-053

46.00 40.00 7.00 7.50 1.50 A RBP-036046-070

48.00 42.00 6.00 9.00 A 141188 PWM-036048-060

49.00 47.50 6.00 8.50 A 67-36 CSW-036049-060

45.00 7.00 10.00 C 141177 MCR-036045-070

46.00 5.00 7.00 C 141171 MCR-036046-050

46.00 7.00 7.00 C MCU-036046-070

48.00 6.00 6.00 C MCU-036048-060

JIS 48.00 7.00 10.00 C DKB 36 DKB-036048-070

37.00 45.00 43.00 4.00 7.00 1.00 A PWF-037045-040

38.00 46.00 44.00 4.00 7.00 1.00 A PWF-038046-040

JIS 46.00 42.00 6.00 6.50 A DH 38 DH-038046-060

46.60 41.00 5.30 7.00 A 149181 PW-038046-053

48.50 41.00 4.80 7.00 A 149188 PW-038048-048

48.00 7.00 10.00 C 149188 MCR-038048-070

50.00 7.50 7.50 C MCU-038050-075

JIS 50.00 7.00 10.00 C DKB 38 DKB-038050-070

JIS 50.00 7.00 10.00 C DKI 38 DKI-038050-070

40.00 46.80 43.50 5.00 5.00 A WTN-040046-050

46.80 43.50 5.00 5.00 A WTV-040046-050

Rod Wipers

47.50 42.90 1.60 3.00 A SDK-040047-016

Wipers

48.00 46.00 4.00 7.00 1.00 A PWF-040048-040

JIS 48.00 44.00 6.00 6.50 A DH 40 DH-040048-060

48.60 43.00 5.30 7.00 A 157188 PW-040048-053

JIS 50.60 46.00 4.60 6.90 A DH 40A DH-040050-060

50.00 45.00 5.00 8.00 A 157196 PW-040050-050

50.00 45.00 7.10 12.00 A 157196 PW-040050-071

50.00 44.00 7.00 7.50 1.50 A RBP-040050-070

50.00 52.50 9.40 14.00 RCA-040050-115

52.00 46.00 6.00 9.00 A 157204 PWM-040052-060

53.00 51.50 6.00 8.50 A 67-40 CSW-040053-060

05/06 16/31
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 32

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

40.00 50.00 5.00 8.00 C 157196 MCR-040050-050

50.00 7.00 10.00 C 157196 MCR-040050-070

50.00 4.00 4.00 C MCU-040050-040

JIS 52.00 7.00 10.00 C DKB 40 DKB-040052-070

JIS 52.00 7.00 10.00 C DKI 40 DKI-040052-070

JIS 52.00 6.00 6.00 C DWI 40 MCU-040052-060

JIS 52.00 7.00 10.00 C DKBI 40 DKBI-040052-070

JIS 62.00 8.00 11.00 C DKB 40A DKB-040062-080

42.00 50.00 48.00 4.00 7.00 1.00 A PWF-042050-040

50.60 45.00 5.30 7.00 A 165196 PW-042050-053

52.00 7.00 10.00 C 165204 MCR-042052-070

52.00 7.00 7.00 C MCU-042052-070

45.00 51.80 48.50 5.00 5.00 A WTN-045051-050

51.80 48.50 5.00 5.00 A WTV-045051-050

52.50 47.90 1.60 3.00 A SDK-045052-016

53.00 51.00 4.00 7.00 1.00 A PWF-045053-040

JIS 53.00 49.00 6.00 6.50 A DH 45 DH-045053-060

53.00 48.00 5.00 6.00 1.30 A RBP-045053-050

53.60 48.00 5.30 7.00 A 177208 PW-045053-053

53.60 48.00 5.30 7.00 A 177208 PWV-045053-053

53.60 48.00 5.30 7.00 A RTL-045053-053

54.00 48.00 5.10 7.00 A 177212 PW-045054-051

JIS 55.00 50.00 7.00 8.00 A DSI 45 DSI-045055-070

55.00 49.00 7.00 7.50 1.50 A RBP-045055-070

55.00 58.20 10.40 15.00 RCA-045055-125

55.60 48.00 5.30 7.00 A 177216 PW-045055-053

58.00 56.50 6.00 8.50 A 67-45 CSW-045058-060

60.00 53.00 4.20 7.00 A 177236 PW-045060-042

55.00 5.00 7.00 C 216177 MCR-045055-050

55.00 7.00 10.00 C 216177 MCR-045055-070

55.00 4.00 4.00 C MCU-045055-040

JIS 57.00 7.00 10.00 C DKB 45 DKB-045057-070

JIS 57.00 7.00 10.00 C DKBI 45 DKBI-045057-070

16/32 05/06
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 33

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

JIS 45.00 57.00 51.00 7.00 8.70 3.00 A SCK 45 SCK-045057-070

60.00 7.00 10.00 C 216236 MCR-045060-070

60.00 7.50 7.50 C MCU-045060-075

JIS 68.00 7.00 10.00 C DKB 45A DKB-045068-070

46.00 54.00 52.00 4.00 7.00 1.00 A PWF-046054-040

54.60 49.00 5.30 7.00 A 181212 PW-046054-053

47.00 55.00 53.00 4.00 7.00 1.00 A PWF-047055-040

JIS 59.00 7.00 10.00 C DKI 47 DKI-047059-070

48.00 56.60 51.00 5.30 7.00 A 188220 PWM-048056-053

60.00 7.00 10.00 C 188236 MCR-048060-070

50.00 56.80 53.50 5.00 5.00 A WTN-050056-050

56.80 53.50 5.00 5.00 A WTV-050056-050

58.00 56.00 4.00 7.00 1.00 A PWF-050058-040

JIS 58.00 54.00 6.00 6.50 A DH 50 DH-050058-060

58.60 53.00 5.30 7.00 A 196228 PW-050058-053

58.80 54.00 6.00 6.00 A WTN-050058-060

58.80 54.00 6.00 6.00 A WTV-050058-060

JIS 60.00 55.00 7.00 8.00 A DSI 50A DSI-050060-070

60.00 55.00 7.10 12.00 A 196236 PW-050060-071

60.00 54.60 2.15 4.00 A SDK-050060-021

60.00 63.20 10.40 15.00 RCA-050060-125

60.60 53.00 5.30 7.00 A 196236 PW-050060-053

Rod Wipers

62.00 55.00 6.00 9.00 A 196244 PWM-050062-060

Wipers

62.00 55.00 8.50 9.00 2.00 A RBP-050062-085

63.00 61.50 6.00 8.50 A 67-50 CSW-050063-060

65.50 53.00 4.20 7.00 A 196258 PW-050065-042

62.70 56.40 5.30 11.00 B 196246 PWS-050062-053

56.00 5.00 8.00 C 196220 MCR-050056-050

60.00 5.00 8.00 C 196236 MCR-050060-050

60.00 7.00 10.00 C 196236 MCR-050060-070

60.00 4.00 4.00 C MCU-050060-040

60.00 7.50 7.50 C MCU-050060-075

JIS 62.00 7.00 10.00 C DKB 50 DKB-050062-070

05/06 16/33
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 34

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

JIS 50.00 62.00 7.00 10.00 C DKBI 50 DKBI-050062-070

JIS 62.00 56.00 7.00 8.70 3.00 A SCK 50 SCK-050062-070

63.00 4.00 4.00 C MCU-050063-040

JIS 63.00 8.00 8.00 C DKIY 50 DKIY-050063-080

JIS 64.00 8.00 8.00 C DKIY 50 DKIY-050064-080

65.00 5.00 8.00 C 196255 MCR-050065-050

65.00 7.00 10.00 C 196255 MCR-050065-070

65.00 7.50 7.50 C MCU-050065-075

JIS 72.00 8.00 11.00 C DKB 50A DKB-050072-080

JIS 72.00 8.00 11.00 C DKBI 50 DKBI-050072-080

JIS 53.00 61.00 57.00 6.00 6.50 A DH 53 DH-053061-050

61.60 56.00 5.30 7.00 A 208240 PW-053061-053

JIS 67.00 8.00 11.00 C MC 53 DKI-053067-080

55.00 61.80 58.50 5.00 5.00 A WTN-055061-050

61.80 58.50 5.00 5.00 A WTV-055061-050

63.00 61.00 4.00 7.00 1.00 A PWF-055063-040

JIS 63.00 59.00 6.00 6.50 A DH 55 DH-055063-060

63.60 58.00 5.30 7.00 A 216248 PW-055063-053

63.80 59.00 6.30 6.30 A WTN-055063-063

63.80 59.00 6.30 6.30 A WTV-055063-063

JIS 65.00 60.00 7.00 8.50 A DSI 55A DSI-055065-070

65.00 59.60 2.15 4.00 A SDK-055065-021

65.60 58.00 5.30 7.00 A 216255 PW-055065-053

67.70 61.40 5.30 11.00 B 216266 PWS-055067-053

63.00 7.00 10.00 C 216248 MCR-055063-070

65.00 4.00 4.00 C 216255 MCR-055065-040

65.00 5.00 7.00 C 216255 MCR-055065-050

65.00 7.00 10.00 C 216255 MCR-055065-070

65.00 3.20 3.20 C MCU-055065-032

JIS 65.00 5.00 5.00 C DKIY 55 DKIY-055065-050

JIS 69.00 8.00 11.00 C DKB 55 DKB-055069-080

JIS 69.00 8.00 11.00 C DKI 55 DKI-055069-080

JIS 69.00 8.00 11.00 C DKBI 55 DKBI-055069-080

16/34 05/06
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 35

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

55.00 70.00 7.50 7.50 C MCU-055070-075

JIS 70.00 6.00 6.00 C DKIY 55 DKIY-055070-060

68.00 4.00 4.00 C Pin Wiper MPW-055068-040

56.00 62.80 59.50 5.00 5.00 A WTN-056062-050

62.80 59.50 5.00 5.00 A WTV-056062-050

64.00 62.00 4.00 7.00 1.00 A PWF-056064-040

JIS 64.00 60.00 6.00 6.50 A DH 56 DH-056064-060

64.60 59.00 5.30 7.00 A 220251 PW-056064-053

66.60 59.00 5.30 7.00 A 220259 PW-056066-053

69.00 67.50 6.00 8.50 A 67-56 CSW-056069-060

65.00 7.00 10.00 C 220255 MCR-056065-070

66.00 5.00 7.00 C 220259 MCR-056066-050

66.00 7.00 10.00 C 220259 MCR-056066-070

JIS 70.00 7.50 7.50 C DWI 56 MCU-056070-075

JIS 70.00 8.00 11.00 C DKI 56 DKI-056070-080

58.00 66.00 64.00 4.00 7.00 1.00 A PWF-058066-040

59.50 68.50 62.50 5.10 7.00 A 234269 PW-059068-051

60.00 66.80 63.50 5.00 5.00 A WTN-060066-050

66.80 63.50 5.00 5.00 A WTV-060066-050

68.00 66.00 4.00 7.00 1.00 A PWF-060068-040

JIS 68.00 64.00 6.00 6.50 A DH 60 DH-060068-060

68.60 63.00 5.30 7.00 A 236267 PW-060068-053

Rod Wipers

68.60 63.00 5.30 7.00 A RTL-060068-053

Wipers

70.00 65.00 6.00 7.00 A DH-060070-060

70.00 65.00 7.10 12.00 A 236275 PW-060070-071

70.00 64.60 2.15 4.00 A SDK-060070-021

70.60 66.50 5.50 7.00 A 236275 PW-060070-055

73.00 71.50 6.00 8.50 A 67-60 CSW-060073-060

JIS 73.00 66.50 8.00 9.50 A DSI 60 DSI-060073-080

72.70 66.40 5.30 11.00 B 236286 PWS-060072-053

70.00 5.00 8.00 C 236275 MCR-060070-050

70.00 7.00 10.00 C 236275 MCR-060070-070

JIS 74.00 8.00 11.00 C DKB 60 DKB-060074-080

05/06 16/35
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 36

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

JIS 60.00 74.00 8.00 11.00 C DKI 60 DKI-060074-080

JIS 74.00 8.00 11.00 C DKBI 60 DKBI-060074-080

75.00 7.00 10.00 C 236295 MCR-060075-070

75.00 4.00 4.00 C MCU-060075-040

75.00 8.00 8.00 C MCU-060075-080

75.00 4.00 4.00 C Pin Wiper MPW-060075-040

JIS 75.00 6.00 6.00 C DKIY 60 DKIY-060075-060

80.00 7.00 10.00 C 236314 MCR-060080-070

JIS 80.00 10.00 13.00 C DKI 60A DKI-060080-100

JIS 82.00 11.00 14.00 C DKB 60A DKB-060082-110

61.00 70.50 64.00 7.50 7.50 A RTI-061070-075

63.00 71.00 69.00 4.00 7.00 1.00 A PWF-063071-040

JIS 71.00 67.00 6.00 6.50 A DH 63 DH-063071-060

71.60 66.00 5.30 7.00 A 248279 PW-063071-053

ISO 73.00 68.50 6.30 10.00 A 248287 PW-063073-063

73.00 67.60 2.15 4.00 A SDK-063073-021

73.60 66.00 5.30 7.00 A 248287 PW-063073-053

76.00 74.50 6.00 8.50 A 67-63 CSW-063076-060

75.00 78.20 11.40 16.00 RCA-063075-130

75.00 7.00 10.00 C 248295 MCR-063075-070

JIS 77.00 8.00 11.00 C DKI 63 DKI-063077-080

78.00 7.50 7.50 C MCU-063078-075

JIS 64.00 78.00 8.00 11.00 C DKI 64 DKI-064078-080

65.00 73.00 71.00 4.00 7.00 1.00 A PWF-065073-040

JIS 73.00 69.00 6.00 6.50 A DH 65 DH-065073-060

73.60 68.00 5.30 7.00 A 255287 PW-065073-053

73.80 69.00 6.00 6.00 A WTN-065073-060

73.80 69.00 6.00 6.00 A WTV-065073-060

75.00 70.00 7.10 12.00 A 255295 PW-065075-071

75.60 68.00 5.30 7.00 A 255295 PW-065075-053

76.60 71.50 6.00 10.00 A 255302 PW-065076-060

JIS 78.00 71.50 8.00 9.50 A DSI 65 DSI-065078-080

77.70 71.40 5.30 11.00 B 255305 PWS-065077-053

16/36 05/06
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 37

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

65.00 75.00 7.00 10.00 C 255295 MCR-065075-070

75.00 7.00 7.00 C MCU-065075-070

JIS 79.00 8.00 11.00 C DKB 65 DKB-065079-080

JIS 79.00 8.00 11.00 C DKI 65 DKI-065079-080

JIS 79.00 8.00 11.00 C DKBI 65 DKBI-065079-080

80.00 5.00 5.00 C MCU-065080-050

80.00 7.50 7.50 C MCU-065080-075

80.00 4.00 4.00 C Pin Wiper MPW-065080-040

JIS 67.00 75.00 71.00 6.00 6.50 A DH 67 DH-067075-060

76.60 71.00 5.50 7.00 A 264302 PW-067076-055

JIS 81.00 8.00 11.00 C DKI 67 DKI-067081-080

70.00 76.00 72.00 4.30 6.00 A 275299 PWM-070076-043

78.00 76.00 4.00 7.00 1.00 A PWF-070078-040

78.60 73.00 5.30 7.00 A 275307 PW-070078-053

78.80 74.00 6.00 6.00 A WTN-070078-060

78.80 74.00 6.00 6.00 A WTV-070078-060

JIS 80.00 75.00 7.00 8.00 A DH 70 DH-070080-070

80.00 75.50 6.30 8.00 A 248287 PW-070080-063

80.00 74.00 7.00 10.00 A 275314 PW-070080-070

80.00 75.00 6.00 7.00 1.50 A RBP-070080-060

80.00 74.60 2.15 4.00 A SDK-070080-021

80.60 73.00 5.30 7.00 A 275314 PW-070080-053

Rod Wipers

82.60 76.00 7.10 10.00 A 275322 PW-070082-071

Wipers

83.00 81.50 6.00 8.50 A 67-70 CSW-070083-060

JIS 83.00 76.50 8.00 9.50 A DSI 70 DSI-070083-080

80.00 7.00 10.00 C 275314 MCR-070080-070

80.00 5.00 5.00 C MCU-070080-050

JIS 84.00 8.00 11.00 C DKB 70 DKB-070084-080

JIS 84.00 8.00 11.00 C DKI 70 DKI-070084-080

JIS 84.00 8.00 8.00 C DWI 70 MCU-070084-080

JIS 84.00 8.00 11.00 C DKBI 70 DKBI-070084-080

85.00 7.50 7.50 C MCU-070085-075

85.00 4.00 4.00 C Pin Wiper MPW-070085-040

05/06 16/37
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 38

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

JIS 70.00 85.00 5.00 5.00 C DKIY 70 DKIY-070085-050

JIS 90.00 10.00 13.00 C DKI 70A DKI-070090-100

JIS 71.00 81.00 76.00 7.00 8.00 A DH 71 DH-071081-070

JIS 85.00 8.00 11.00 C DKB 71 DKI-071085-080

86.00 5.00 5.00 C MCU-071086-050

72.00 80.00 78.00 4.00 7.00 1.00 A PWF-072080-040

80.60 75.00 5.30 7.00 A 283317 PWM-072080-053

73.00 79.40 76.50 5.00 5.00 A WTN-073079-050

79.40 76.50 5.00 5.00 A WTV-073079-050

81.60 76.00 5.30 7.00 A 287318 PW-073081-053

83.60 76.00 7.30 10.00 A 287326 PW-073083-073

74.50 83.50 77.00 5.10 7.00 A 293326 PW-074083-051

75.00 83.00 81.00 4.00 7.00 1.00 A PWF-075083-040

83.60 78.00 5.30 7.00 A 295326 PW-075083-053

83.60 78.00 5.30 7.00 A RTL-075083-053

83.80 79.00 6.00 6.00 A WTN-075083-060

83.80 79.00 6.00 6.00 A WTV-075083-060

JIS 85.00 80.00 7.00 8.00 A DH 75 DH-075085-070

85.00 79.60 2.15 4.00 A SDK-075085-021

87.20 81.00 7.10 10.00 A 295345 PW-075087-071

87.70 81.40 5.30 11.00 B 295345 PWS-075087-053

83.00 7.00 10.00 C 295326 MCR-075083-070

85.00 7.00 10.00 C 295334 MCR-075085-070

87.00 5.00 7.00 C 295342 MCR-075087-050

JIS 88.00 81.50 8.00 9.50 A DSI 88 DSI-075088-080

JIS 89.00 8.00 11.00 C DKB 75 DKB-075089-080

JIS 89.00 8.00 11.00 C DKI 75 DKI-075089-080

JIS 89.00 8.00 11.00 C DKBI 75 DKBI-075089-080

90.00 7.50 7.50 C MCU-075090-075

90.00 4.00 4.00 C Pin Wiper MPW-075090-040

95.00 10.00 10.00 C MCU-075095-100

77.00 85.60 80.00 5.30 7.00 A 303337 PW-077085-053

78.00 86.00 81.00 5.00 7.00 A 307338 PW-078086-050

16/38 05/06
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 39

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

78.00 88.00 82.60 2.15 4.00 A SDK-078088-021

88.60 84.50 5.50 7.00 A 307346 PW-078088-055

92.00 82.60 3.15 6.00 A SDK-078092-031

92.20 85.00 7.10 10.00 A 307362 PW-078092-071

88.00 7.00 10.00 C 307346 MCR-078088-070

79.00 88.50 83.00 7.50 7.50 A RTI-079088-075

80.00 88.00 86.00 4.00 7.00 1.00 A PWF-080088-040

88.60 83.00 5.30 7.00 A 314346 PW-080088-053

88.80 84.00 6.00 6.00 A WTN-080088-060

88.80 84.00 6.00 6.00 A WTV-080088-060

JIS 90.00 85.00 7.00 8.00 A DH 80 DH-080090-070

90.00 84.60 2.15 4.00 A SDK-080090-021

90.60 83.50 5.30 7.00 A 314356 PW-080090-053

92.60 86.00 7.10 10.00 A 314362 PW-080092-071

93.00 91.50 6.00 8.50 A 67-80 CSW-080093-060

JIS 93.00 86.50 8.00 9.50 A DSI 80 DSI-080093-080

92.70 86.40 5.30 11.00 B 314365 PWS-080092-053

88.00 7.00 10.00 C 314346 MCR-080088-070

90.00 7.00 10.00 C 314354 MCR-080090-070

JIS 94.00 8.00 11.00 C DKB 80 DKB-080094-080

JIS 94.00 8.00 11.00 C DKI 80 DKI-080094-080

JIS 94.00 8.00 11.50 C DKBI 80 DKBI-080094-080

Rod Wipers

95.00 5.00 5.00 C MCU-080095-050

Wipers

95.00 7.50 7.50 C MCU-080095-075

JIS 95.00 5.00 C DKIY 80 DKIY-080095-050

100.00 10.00 10.00 C MCU-080100-100

JIS 100.00 12.00 15.00 C DKI 80 DKI-080100-120

84.00 92.00 87.00 5.30 7.00 A 330362 PWM-084092-053

85.00 93.00 91.00 4.00 7.00 1.00 A PWF-085093-040

93.60 88.00 5.30 7.00 A 334366 PW-085093-053

93.80 89.00 6.00 6.00 A WTN-085093-060

93.80 89.00 6.00 6.00 A WTV-085093-060

JIS 95.00 90.00 7.00 8.00 A DH 85 DH-085095-070

05/06 16/39
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 40

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

85.00 95.00 7.00 10.00 C 334374 MCR-085095-070

95.00 89.60 2.15 4.00 A SDK-085095-021

97.20 91.00 7.10 10.00 A 334381 PW-085097-071

JIS 98.00 91.50 8.00 9.50 A DSI 85 DSI-085098-080

JIS 99.00 8.00 11.00 C DKB 85 DKB-085099-080

JIS 99.00 8.00 11.00 C DKBI 85 DKBI-085099-080

100.00 10.00 10.00 C MCU-085100-100

100.00 4.00 4.00 C Pin Wiper MPW-085100-040

105.00 10.00 10.00 C MCU-085105-100

86.00 94.00 92.00 4.00 7.00 1.00 A PWF-086094-040

88.50 96.50 94.50 4.00 7.00 1.00 A PWF-088096-040

89.50 98.50 92.50 5.10 7.00 A 352387 PW-089098-051

90.00 98.00 96.00 4.00 7.00 1.00 A PWF-090098-040

98.20 94.00 5.30 7.00 A 354385 PW-090098-053A

98.60 93.00 5.30 7.00 A 354385 PW-090098-053

98.80 94.00 6.00 6.00 A WTN-090098-060

98.80 94.00 6.00 6.00 A WTV-090098-060

JIS 100.00 95.00 7.00 8.00 A DH 90 DH-090100-070

100.00 94.00 7.00 10.00 A 354393 PW-090100-070

100.00 94.60 2.15 4.00 A SDK-090100-021

102.00 94.00 6.00 10.00 A 354401 PW-090102-060

102.20 96.00 7.10 10.00 A 354401 PW-090102-071

JIS 103.00 96.50 8.00 9.50 A DSI 90 DSI-090103-080

102.70 96.40 5.30 11.00 B 354040 PWS-090102-053

100.00 7.00 10.00 C 354393 MCR-090100-070

100.00 7.00 7.00 C MCU-090100-070

JIS 104.00 8.00 11.00 C DKB 90 DKB-090104-080

JIS 104.00 8.00 11.00 C DKI 90 DKI-090104-080

JIS 104.00 8.00 8.00 C DWI 90 MCU-090104-080

JIS 104.00 8.00 11.00 C DKBI 90 DKBI-090104-080

105.00 6.00 6.00 C MCU-090105-060

105.00 4.00 4.00 C Pin Wiper MPW-090105-040

JIS 105.00 6.00 6.00 C DKIY 90 DKIY-090105-060

16/40 05/06
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 41

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

90.00 110.00 10.00 10.00 C MCU-090110-100

JIS 110.00 8.00 11.00 C DKI 90A DKI-090110-080

91.00 99.60 94.00 5.30 7.00 A 358389 PW-091099-053

92.00 100.00 95.00 5.30 7.00 A RTL-092100-053

103.60 97.00 5.50 8.00 A 362407 PW-092103-055

JIS 106.00 8.00 11.00 C DKI 92 DKI-092106-080

93.00 101.00 96.00 5.00 7.00 A 336397 PW-093101-050

123.00 115.00 5.00 7.00 A 366484 PW-093123-050

95.00 103.60 98.00 5.30 7.00 A 374407 PW-095103-053

103.80 99.00 6.00 6.00 A WTN-095103-060

103.80 99.00 6.00 6.00 A WTV-095103-060

JIS 105.00 100.00 7.00 8.00 A DH 95 DH-095105-070

105.00 99.00 10.00 14.00 A 374413 PW-095105-100

105.00 99.60 2.15 4.00 A SDK-095105-021

107.20 101.00 7.10 10.00 A 374421 PW-095107-071

JIS 108.00 101.50 8.00 9.50 A DSI 95 DSI-095108-080

107.70 101.40 5.30 11.00 B 374424 PWS-095107-053

105.00 7.00 10.00 C 374413 MCR-095105-070

JIS 109.00 8.00 11.00 C DKB 95 DKB-095109-080

JIS 109.00 8.00 11.00 C DKI 95 DKI-095109-080

JIS 109.00 8.00 11.00 C DKBI 95 DKBI-095109-080

110.00 4.00 4.00 C Pin Wiper MPW-095110-040

Rod Wipers

115.00 10.00 10.00 C MCU-095115-100

Wipers

97.00 105.00 100.00 5.00 7.00 A 381413 PW-097105-050

105.60 100.00 5.30 7.00 A 381415 PW-097105-053

JIS 98.00 108.00 103.00 7.00 8.00 A DH 98 DH-098108-070

108.20 102.00 7.50 7.50 A RTI-098108-075

99.00 109.60 105.50 5.50 7.00 A 390429 PW-099109-055

100.00 108.00 106.00 4.00 7.00 1.00 A PWF-100108-040

108.60 103.00 5.30 7.00 A 393425 PW-100108-053

108.80 104.00 6.00 6.00 A WTN-100108-060

108.80 104.00 6.00 6.00 A WTV-100108-060

JIS 110.00 105.00 7.00 8.00 A DH 100 DH-100110-070

05/06 16/41
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 42

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

100.00 110.00 104.60 2.15 4.00 A SDK-100110-021

112.20 104.00 6.00 10.00 A 393441 PW-100112-060

112.20 106.00 7.10 10.00 A 393440 PW-100112-071

113.00 111.50 6.00 8.50 A 67-100 CSW-100113-060

JIS 113.00 106.50 8.00 9.50 A DSI 100 DSI-100113-080

112.70 106.40 5.30 11.00 B 393443 PWS-100112-053

110.00 7.00 10.00 C 393433 MCR-100110-070

110.00 7.00 7.00 C MCU-100110-070

JIS 114.00 8.00 11.00 C DKB 100 DKB-100114-080

JIS 114.00 8.00 11.00 C DKI 100 DKI-100114-080

JIS 114.00 8.00 11.00 C DKBI 100 DKBI-100114-080

115.00 4.00 4.00 C MCU-100115-040

115.00 7.00 7.00 C MCU-100115-070

120.00 10.00 10.00 C MCU-100120-100

120.00 4.00 4.00 C Pin Wiper MPW-100120-040

101.00 109.00 107.00 4.00 7.00 1.00 A PWF-101109-040

111.00 105.00 5.30 7.00 A 397437 PWM-101111-053

104.50 113.50 107.50 5.10 7.00 A 411446 PW-104113-051

105.00 113.00 108.00 5.30 7.00 A RTL-105113-053

113.60 108.00 5.30 7.00 A 413444 PW-105113-053

117.20 111.00 7.10 10.00 A 413460 PW-105117-071

115.00 7.00 10.00 C 413452 MCR-105115-070

120.00 7.50 7.50 C MCU-105120-075

JIS 121.00 9.00 12.00 C DKI 105 DKI-105121-090

JIS 121.00 9.00 12.00 C DKBI 105 DKBI-105121-090

JIS 106.00 122.00 9.00 12.00 C DKI 106 DKI-106122-090

108.50 116.50 114.50 4.00 7.00 1.00 A PWF-108116-040

116.60 111.00 5.30 7.00 A 425459 PW-108116-053

110.00 118.00 116.00 4.00 7.00 1.00 A PWF-110118-040

118.00 113.00 5.30 7.00 A RTL-110118-053

118.60 113.00 5.30 7.00 A 433466 PW-110118-053

118.80 114.00 6.00 6.00 A WTN-110118-060

118.80 114.00 6.00 6.00 A WTV-110118-060

16/42 05/06
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 43

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

JIS 110.00 120.00 115.00 7.00 8.00 A DH 110 DH-110120-070

122.00 119.00 5.50 10.00 1.50 A PWF-110122-055

122.20 116.00 7.10 10.00 A 433480 PW-110122-071

122.20 116.00 8.40 8.40 A WTN-110122-084

122.20 116.00 8.40 8.40 A WTV-110122-084

ISO 125.00 114.00 8.50 13.00 A DH-110125-085

120.00 7.00 10.00 C 433472 MCR-110120-070

124.00 9.00 11.00 C 433488 MCR-110124-090

125.00 9.00 9.00 C MCU-110125-090

125.00 4.00 4.00 C Pin Wiper MPW-110125-040

JIS 126.00 9.00 12.00 C DKB 110 DKB-110126-090

JIS 126.00 9.00 12.00 C DKI 110 DKI-110126-090

JIS 126.00 9.00 12.00 C DKBI 110 DKBI-110126-090

130.00 10.00 10.00 C MCU-110130-100

JIS 112.00 122.00 117.00 7.00 8.00 A DH 112 DH-112122-070

124.20 118.00 7.10 10.00 A 440448 PW-112124-071

JIS 128.00 9.00 12.00 C DKB 112 DKB-112128-090

JIS 128.00 9.00 12.00 C DKI 112 DKI-112128-090

115.00 123.20 118.00 5.30 7.00 A 452485 PW-115123-053

125.00 119.60 2.15 4.00 A SDK-115125-021

127.00 124.00 5.50 10.00 1.50 A PWF-115127-055

127.00 121.00 10.00 14.00 A 452500 PW-115127-100

Rod Wipers

127.20 121.00 7.10 10.00 A 452500 PW-115127-071

Wipers

125.00 7.00 10.00 C 452492 MCR-115125-070

130.00 7.50 7.50 C MCU-115130-075

JIS 131.00 9.00 12.00 C DKB 115 DKB-115131-090

JIS 131.00 9.00 12.00 C DKBI 115 DKBI-115131-090

116.00 129.20 120.00 8.00 8.00 A RTI-116129-080

117.00 125.00 123.00 4.00 7.00 1.00 A PWF-117125-040

125.60 120.00 5.30 7.00 A 460494 PW-117125-053

118.00 126.00 121.00 5.00 7.00 A 454496 PW-118126-050

130.20 124.00 7.10 12.50 A 464511 PW-118130-070

JIS 134.00 9.00 12.00 C DKI 118 DKI-118134-090

05/06 16/43
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 44

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

119.50 128.50 122.50 5.10 7.00 A 470505 PW-119128-051

120.00 128.00 123.00 5.30 7.00 A RTL-120128-053

128.60 123.00 5.30 7.00 A 472504 PW-120128-053

128.80 124.00 6.00 6.00 A WTN-120128-060

128.80 124.00 6.00 6.00 A WTV-120128-060

130.60 126.50 5.50 7.00 A 472511 PW-120130-055

132.00 129.00 5.50 10.00 1.50 A PWF-120132-055

132.20 126.00 7.10 10.00 A 472519 PW-120132-071

130.00 7.00 10.00 C 472511 MCR-120130-070

130.00 7.00 7.00 C MCU-120130-070

135.00 4.00 4.00 C Pin Wiper MPW-120135-040

JIS 136.00 9.00 12.00 C DKB 120 DKB-120136-090

JIS 136.00 9.00 12.00 C DKI 120 DKI-120136-090

JIS 136.00 9.00 12.00 C DKBI 120 DKBI-120136-090

140.00 10.00 10.00 C MCU-120140-100

121.00 131.00 125.00 5.30 7.00 A 476515 PWM-121131-053

125.00 133.60 128.00 5.30 7.00 A 492525 PW-125133-053

133.80 129.00 6.00 6.00 A WTN-125133-060

133.80 129.00 6.00 6.00 A WTV-125133-060

137.20 131.00 7.10 10.00 A 492539 PW-125137-071

JIS 138.00 132.00 8.00 9.50 A DH 125 DH-125138-080

140.00 135.00 9.30 12.50 A 492551 PW-125140-093

140.00 133.00 10.10 16.00 A 492551 PW-125140-101

140.00 9.00 12.00 C 492551 MCR-125140-090

JIS 140.00 4.00 4.00 C DKIY 125 DKIY-125140-040

JIS 141.00 9.00 12.00 C DKI 125 DKI-125141-090

126.00 134.60 129.00 5.30 7.00 A 496529 PW-126134-053

127.00 140.00 130.00 5.30 7.00 A 500551 PW-127140-053

128.00 140.20 134.00 7.10 10.00 A 504552 PW-128140-071

128.50 136.50 134.50 4.00 7.00 1.00 A PWF-128136-040

130.00 138.00 133.00 5.30 7.00 A RTL-130138-053

138.80 134.00 6.00 6.00 A WTN-130138-060

138.80 134.00 6.00 6.00 A WTV-130138-060

16/44 05/06
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 45

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

130.00 142.20 136.00 7.10 10.00 A 511559 PW-130142-071

140.00 7.00 10.00 C 511551 MCR-130140-070

145.00 9.00 12.00 C 511570 MCR-130145-090

145.00 7.50 7.50 C MCU-130145-075

JIS 146.00 9.00 12.00 C DKB 130 DKB-130146-090

JIS 146.00 9.00 12.00 C DKI 130 DKI-130146-090

JIS 146.00 9.00 12.00 C DKBI 130 DKBI-130146-090

JIS 132.00 148.00 9.00 12.00 C DKH 132 DKH-132148-090

134.50 143.50 137.50 5.10 7.00 A 529564 PW-134143-051

135.00 143.00 138.00 5.30 7.00 A RTL-135143-053

147.20 141.00 7.10 10.00 A 531579 PW-135147-071

148.20 139.00 8.00 8.00 A RTI-135148-080

145.00 7.00 10.00 C 531570 MCR-135145-070

150.00 9.00 12.00 C 531590 MCR-135150-090

JIS 150.00 8.00 11.50 C DKBI 135 DKBI-135150-080

JIS 155.00 10.00 14.00 C DKI 135 DKI-135155-100

JIS 136.00 149.00 143.00 8.00 9.50 A DH 136 DH-136149-080

137.00 145.60 140.00 5.30 7.00 A 539573 PW-137145-053

140.00 148.60 143.00 5.30 7.00 A 551585 PW-140148-053

148.60 143.00 6.00 8.00 A 551585 PW-140148-060

148.80 144.00 6.00 6.00 A WTN-140148-060

148.80 144.00 6.00 6.00 A WTV-140148-060

Rod Wipers

150.00 144.60 2.15 4.00 A SDK-140150-021

Wipers

152.00 149.00 5.50 10.00 1.50 A PWF-140152-055

152.20 146.00 7.10 10.00 A 551598 PW-140152-071

JIS 153.00 147.00 8.00 9.50 A DH 140 DH-140153-080

JIS 155.00 147.50 8.00 9.50 A DSI 140 DSI-140155-080

155.00 147.00 9.00 13.00 A 551610 PW-140155-090

155.20 147.00 10.10 14.00 A 551610 PWM-140155-101

150.00 7.00 10.00 C 511590 MCR-140150-070

155.00 9.00 12.00 C 511610 MCR-140155-090

JIS 160.00 10.00 14.00 C DKI 140 DKI-140160-100

JIS 160.00 10.00 14.00 C DKBI 140 DKBI-140160-100

05/06 16/45
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 46

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

141.00 151.60 147.50 5.50 7.00 A 555594 PW-141151-055

143.00 151.00 146.00 5.50 7.00 A 562594 PW-143151-055

145.00 157.20 151.00 7.10 10.00 A 570618 PW-145157-071

JIS 158.00 152.00 8.00 9.50 A DH 145 DH-145158-080

160.00 152.00 8.00 11.00 A 570629 PW-145160-080

JIS 165.00 10.00 14.00 C DKB-145165-100

JIS 165.00 10.00 14.00 C DKI 145 DKI-145165-100

146.00 154.60 149.00 5.30 7.00 A 575608 PW-146154-053

158.00 152.00 6.30 8.00 A 575622 PWM-146158-063

148.00 160.00 152.00 7.00 10.00 A 582629 PW-148160-070

148.50 156.50 154.50 4.00 7.00 1.00 A PWF-148156-040

149.50 158.50 152.50 5.10 7.00 A 588624 PW-149158-051

150.00 158.60 153.00 5.30 7.00 A 590622 PW-150158-053

162.00 159.00 5.50 10.00 1.50 A PWF-150162-055

162.20 156.00 7.10 10.00 A 590637 PW-150162-071

165.00 156.00 7.50 10.00 A 590649 PW-150165-075

165.00 9.00 12.00 C 590650 MCR-150165-090

JIS 170.00 10.00 14.00 C DKB 150 DKB-150170-100

JIS 170.00 8.00 11.00 C DKI 150A DKI-150170-080

JIS 170.00 10.00 14.00 C DKI 150 DKI-150170-100

154.00 162.00 157.00 5.30 7.00 A RTL-154162-053

167.20 158.00 8.00 8.00 A RTI-154167-080

JIS 155.00 175.00 10.00 14.00 C DKB 155 DKB-155175-100

JIS 175.00 10.00 14.00 C DKI 155 DKI-155175-100

160.00 168.60 163.00 5.30 7.00 A 629661 PW-160168-053

168.80 164.00 6.00 6.00 A WTN-160168-060

168.80 164.00 6.00 6.00 A WTV-160168-060

172.00 169.00 5.50 10.00 1.50 A PWF-160172-055

172.20 166.00 7.10 10.00 A 629677 PW-160172-071

JIS 174.00 167.00 8.00 9.50 A DH 160 DH-160174-080

175.20 168.00 10.10 14.00 A 629688 PW-160175-101

175.00 9.00 12.00 C 629688 MCR-160175-090

JIS 180.00 10.00 14.00 C DKB 160 DKB-160180-100

16/46 05/06
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 47

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

JIS 160.00 180.00 10.00 14.00 C DKBI 160 DKBI-160180-100

JIS 180.00 10.00 14.00 C DKI 160 DKI-160180-100

162.00 172.60 168.00 5.50 7.00 A 638677 PW-162172-055

163.00 175.20 169.00 7.10 10.00 A 642690 PW-163175-071

175.00 7.00 10.00 C 641688 MCR-163175-070

JIS 165.00 179.00 172.00 8.00 9.50 A DH 165 DH-165179-080

180.00 175.00 9.50 14.00 A 649708 PW-165180-095

JIS 185.00 10.00 14.00 C DKBI 165 DKBI-165185-100

JIS 185.00 10.00 14.00 C DKI 165 DKI-165185-100

165.50 174.50 168.50 5.10 7.00 A 651687 PW-165174-051

170.00 178.60 173.00 5.30 7.00 A 669703 PW-170178-053

178.80 174.00 6.00 6.00 A WTN-170178-060

178.80 174.00 6.00 6.00 A WTV-170178-060

185.20 178.00 10.10 14.00 A 669728 PW-170185-101

185.00 9.00 12.00 C 699728 MCR-170185-090

JIS 190.00 10.00 14.00 C DKB 170 DKB-170190-100

JIS 190.00 10.00 14.00 C DKBI 170 DKBI-170190-100

171.00 183.00 176.00 6.30 8.00 A 673720 PWM-171183-063

171.50 179.50 177.50 4.00 7.00 1.00 A PWF-171179-040

174.00 187.20 178.00 8.00 8.00 A RTI-174187-080

175.00 189.20 182.00 7.10 10.00 A 688744 PWM-175189-071

JIS 195.00 10.00 14.00 C DKB-175195-100

Rod Wipers

JIS 195.00 10.00 14.00 C DKI-175195-100

Wipers

180.00 188.60 183.00 5.30 7.00 A 708742 PW-180188-053

188.80 184.00 6.00 6.00 A WTN-180188-060

188.80 184.00 6.00 6.00 A WTV-180188-060

JIS 194.00 187.00 8.00 9.50 A DH 180 DH-180194-080

195.20 188.00 10.10 14.00 A 708767 PW-180195-101

200.00 188.00 7.00 10.00 A 708787 PW-180200-070

JIS 200.00 10.00 14.00 C DKB 180A DKB-180200-100

JIS 205.00 12.00 17.00 C DKB 180 DKB-180205-120

183.00 192.00 186.00 5.10 7.00 A 720755 PW-183192-051

193.60 189.00 5.50 7.00 A 720759 PW-183193-055

05/06 16/47
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 48

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

185.00 193.60 188.00 5.30 7.00 A 728762 PW-185193-053

JIS 210.00 12.00 17.00 C DKH 185 DKBY-185210-120

188.00 200.20 194.00 7.10 10.00 A 740788 PW-188200-071

190.00 205.20 198.00 10.10 14.00 A 748807 PW-190205-101

210.00 200.00 10.10 14.00 A 748826 PW-190210-101

JIS 205.00 9.00 12.00 C DKBI 190A DKBI-190205-090

210.00 10.00 10.00 C MCU-190210-100

JIS 215.00 12.00 17.00 C DKB 190 DKB-190215-120

JIS 215.00 12.00 17.00 C DKI 190 DKI-190215-120

194.50 202.50 200.50 4.00 7.00 1.00 A PWF-194202-040

196.00 209.20 200.00 8.00 8.00 A RTI-196209-080

210.20 203.00 7.10 10.00 A 771826 PWM-196210-071

197.00 205.60 200.00 5.30 7.00 A 775809 PW-197205-053

209.00 202.00 6.30 8.00 A 775823 PWM-197209-063

200.00 208.60 203.00 5.30 7.00 A 787821 PW-200208-053

208.80 204.00 6.00 6.00 A WTN-200208-060

208.80 204.00 6.00 6.00 A WTV-200208-060

JIS 214.00 207.00 8.00 9.50 A DH 200 DH-200214-080

ISO 215.00 210.00 9.50 14.00 A PWF-200215-095

215.20 208.00 10.10 14.00 A 787847 PW-200215-101

220.00 208.00 12.00 16.00 A 787866 PW-200220-120

JIS 216.00 8.00 11.50 C DKBI 200 DKBI-200216-080

JIS 224.00 12.00 17.00 C DKB 200A DKB-200224-120

JIS 225.00 12.00 17.00 C DKB 200 DKB-200225-120

JIS 225.00 12.00 17.00 C DKI 200 DKI-200225-120

201.50 210.50 204.50 5.10 7.00 A 793828 PW-201210-051

JIS 204.00 218.00 211.00 8.00 9.50 A DH 204 DH-204218-070

205.00 213.60 208.00 5.30 7.00 A 807840 PW-205213-053

207.00 217.60 210.00 5.50 7.00 A 815854 PW-207217-055

210.00 225.20 218.00 10.10 14.00 A 826886 PW-210225-101

230.00 12.00 16.00 C 826905 MCR-210230-120

JIS 230.00 12.00 17.00 C DKB 210A DKB-210230-120

JIS 230.00 12.00 17.00 C DKBI 210 DKBI-210230-120

16/48 05/06
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 49

CSW DH DSI PW PWF PWM PWS RBP RCA RTL RTI

SDK WTN WTV DKB DKBI DKI DKIY MCR MCU MPW

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

JIS 210.00 235.00 12.00 17.00 C DKB 210 DKB-210235-120

JIS 212.00 237.00 12.00 17.00 C DKI 212 DKI-212237-120

220.00 235.20 228.00 10.10 14.00 A 866925 PW-220235-101

240.00 228.00 10.10 14.00 A 866944 PW-220240-101

240.00 9.00 12.00 C 866944 MCR-220240-090

221.00 230.00 224.00 5.10 7.00 A 870905 PW-221230-051

221.50 234.70 225.50 8.00 8.00 A RTI-221234-080

223.00 235.00 228.00 6.30 8.00 A 878925 PWM-223235-063

225.00 245.00 238.50 12.50 18.00 A 885964 PW-225245-125

JIS 250.00 12.00 17.00 C DKB 225 DKB-225250-120

228.00 236.60 231.00 5.30 7.00 A 897931 PW-228236-053

JIS 230.00 244.00 237.00 8.00 9.50 A DH 230 DH-230244-080

245.20 238.00 10.10 14.00 A 905965 PW-230245-101

245.00 8.00 12.00 C 905964 MCR-230246-080

JIS 255.00 12.00 17.00 C DKB 230 DKB-230255-120

JIS 255.00 12.00 17.00 C DKH-230255-120

231.00 241.60 234.00 5.50 7.00 A 909948 PW-231241-055

232.00 240.60 235.00 5.30 7.00 A 913947 PW-232240-053

240.00 255.20 248.00 10.10 14.00 A 9441004 PW-240255-101

242.00 251.00 245.00 5.10 7.00 A 952988 PW-242251-051

249.00 261.00 254.00 6.30 8.00 A 9801027 PWM-249261-063

262.20 253.00 8.00 8.00 A RTI-249262-080

Rod Wipers

250.00 265.20 258.00 10.10 14.00 A 9481044 PW-250265-101

Wipers

270.00 260.00 10.20 14.00 A 9841062 PW-250270-102

JIS 275.00 12.00 17.00 C DKBI 250 DKBI-250275-120

257.00 267.60 264.00 5.50 7.00 A 10111053 PW-257267-055

JIS 260.00 285.00 12.00 17.00 C DKB 260 DKB-260285-120

JIS 265.00 290.00 12.00 17.00 C DKI 265 DKI-265290-120

270.00 285.70 278.00 10.20 14.00 A 10621124 PW-270285-102

279.00 292.20 283.00 8.00 8.00 A RTI-279292-080

280.00 295.70 288.00 10.20 14.00 A 11021164 PW-280295-102

300.00 290.00 10.20 14.00 A 11021181 PW-280300-102

JIS 310.00 16.00 22.00 C DKB 280 DKI-280310-160

05/06 16/49
NRS294-NR Seals Metric 16 8/30/05 2:24 PM Page 50

L1 L1
L1
h

ØD
ØD ØD
30˚ ØD1
ØD1

NR
Ød Ød Ød

S E A L S

A B C

Rod Dia Hsg Dia Ret Dia Hsg Ln Wiper Ln Ret Ln

Ød ØD ØD1 L1 L2 h Hsg Ref Product Code

290.00 305.70 298.00 10.20 14.00 A 11411203 PW-290305-102

300.00 315.70 308.00 10.20 14.00 A 11811243 PW-300315-102

JIS 330.00 16.00 22.00 C DKI 300 DKI-300330-160

345.00 369.00 357.45 10.00 14.00 A 13581452 PW-345369-100

JIS 400.00 430.00 16.00 22.00 C DKH 400 DKH-400430-160

16/50 05/06
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 1

GT
NR
Bearings

S E A L S

Design
Bearings

GT strip is designed for use with glide ring type piston and rod
seals. Made from Bronze filled PTFE, the strip allows contaminate
particles to embed in the non working surface helping to keep
the main seal and cylinder bore/rod free from scoring. Bearing
strip is designed to allow pressure relief to the seal by use of an
expansion gap. This avoids the possibility of a pressure lock
between the seal and the bearing as well as eliminating the
possibility of hydrodynamic pressure build up which will cause
premature destruction of the seal. This relief also avoids the

Key Features presence of excess pressure during the return stroke which can
prevent the transfer of the fluid film back to the pressure side of
the seal, so creating the effect of a leaking seal.
Excellent friction properties
Operating Conditions
Excellent heat resistance
Strength
Easy to fit 1,700 Psi
Compressive
Reduces particulate
1,800 Psi
contamination Tensile

Very flexible Dynamic Load

15N/mm2
Infinite diameters possible @ 25°C Max

Temperature
*See Seal Data for Extrusion Gap Ød2= -50° to 200°C
ØD – (C/S x 0.6)
L L
C/S
-58° to 392°F
*

Speed
( M i n) ØD

5.0m /sec
(nom) Ød1

15.0'/sec

Surface Finish µmRa

Dynamic 0.1 – 0.25 Optimum
Dynamic 0.1 – 0.4 Range
Static ≤2.6

Tolerances
L
Piston Ød = minØD – 2x c/s H11
L Rod ØD = maxØd + 2x c/s f9
L -0.0 + 0.2

C/S
( Nom) ØD
Ø d + 0.6 x C /S
M ax Ød

05/06 17/1
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 2

B1
NR
Bearings

S E A L S

Design
Bearings

B1 non metallic bearing rings are designed for both piston

and gland applications. They are made from heat stabilised
glass reinforced type 66 Nylon possessing excellent impact
resistance and compressive strength. The use of bearing
rings will help provide better piston and rod alignment
therefore avoiding metal to metal contact. This will result in
longer lasting cylinder parts and extended seal life as
contaminates will embed into the softer bearing ring.
They are generally of relatively low cost.

Key Features
Can be cut down
Operating Conditions
Allow steel pistons / glands
Strength
Cheap to replace 35,000 Psi
Compressive
Easy to fit
27,000 Psi
Tensile
Provides improved
alignment Dynamic Load
45N/mm2
Longer seal life @ 25°C Max

Temperature
*See Seal Data for Extrusion Gap Ød2= -40° to 120°C
ØD – (C/S x 0.6)
L L
C/S -40° to 250°F
*

Speed
( M i n ) ØD

3.0m /sec
( n o m ) Ød1

9.0'/sec

Surface Finish µmRa

Dynamic 0.1 – 0.25 Optimum
Dynamic 0.1 – 0.4 Range
Static ≤2.6

Tolerances
L
ØD Ød L
L Piston H9 ≤ 100mm +0 - 0.05 -0 + 0.25
> 100mm +0 - 0.08
Rod f8 ≤ 100mm -0 + 0.05 -0 + 0.25
C/S > 100mm -0 + 0.08
( N om) Ø D
Ød + 0.6 x C/ S
Ma x Ød

17/2 05/06
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 3

B6
NR
Bearings

S E A L S

Design
Bearings

B6 non metallic bearing rings are designed for both piston

and gland applications. They are made from glass filled
Acetal to ensure high mechanical strength and resistance to
heavy radial loads. They are particularly suitable for replacing
traditional soft metal bearings as their low friction benefits
enabling efficient operation with minimal lubrication. The use
of bearing rings will help provide better piston and rod
alignment therefore avoiding metal to metal contact. This will
result in longer lasting cylinder parts and extended seal life

Key Features as some contaminates will embed into the softer bearing
ring. They are generally of relatively low cost.

Can be cut down

Operating Conditions
Allow steel pistons / glands
Strength
Cheap to replace 35,000 Psi
Compressive
Easy to fit
27,000 Psi
Tensile
Provides improved
alignment Dynamic Load
40N/mm2
Longer seal life @ 25°C Max

Temperature
*See Seal Data for Extrusion Gap Ød2=
-40° to 110°C
ØD – (C/S x 0.6)
L L
C/S -40° to 230°F
*

Speed
( M in ) ØD

3.0m /sec
( no m ) Ød1

9.0'/sec

Surface Finish µmRa

Dynamic 0.1 – 0.25 Optimum
Dynamic 0.1 – 0.4 Range
Static ≤2.6

L
Tolerances
ØD Ød L
L
Piston H8 +0 -0.05 -0 +0.25
Rod f7 -0 + 0.05 -0 +0.25

C/S
( Nom ) ØD
Ød + 0.6 x C / S
Ma x Ø d

05/06 17/3
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 4

B8
NR
Bearings

S E A L S

Design
Bearings

B8 bearing rings are designed for use on pistons and or rods

to align rod and piston and to prevent metal to metal
contact. This bearing is precision machined from a reinforced
grade of phenolic resin. The thermoset properties of this
material allow for a high load capability even at higher
temperatures. This will result in longer lasting cylinder parts
and extended seal life as some contaminates will embed into
the softer bearing ring.

Key Features
Can be cut down
Operating Conditions
Allow steel pistons / glands
Strength
High load / heavy duty 34,000 Psi
Compressive
Easy to fit
10,600 Psi
Tensile
Provides improved
alignment Dynamic Load
50N/mm2
Longer seal life @ 25°C Max

Temperature
-40° to 120°C
*See Seal Data for Extrusion Gap Ød2=
ØD – (C/S x 0.6) -40° to 250°F
L L
C/S
*

Speed
3.0m /sec
( M in ) ØD
( no m ) Ød1

9.0'/sec

Surface Finish µmRa

Dynamic 0.1 – 0.25 Optimum
Dynamic 0.1 – 0.4 Range
Static ≤2.6

Tolerances
L ØD Ød L
Piston H9 ≤ 100mm +0 - 0.05 -0.00 +0.20
L
> 100mm +0 - 0.08
Rod f8 ≤ 100mm -0 + 0.05 -0.00 +0.20
> 100mm -0 + 0.08
C/S
( Nom ) ØD
Ød + 0. 6 x C / S
Ma x Ø d

17/4 05/06
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 5

*See Seal Data for Extrusion Gap Ød2=

ØD – (C/S x 0.6)
L L
C/S

( Mi n ) ØD
( n om) Ød1
GT B1 B6 B8

Hsg Ln Hsg Ln

c/s L ØD Ød Product Code c/s L ØD Ød Product Code

1.50 3.20 GT-15032 2.00 10.00 105.00 101.00 B8-105101-100

1.50 6.30 GT-15063 2.00 10.20 50.00 46.00 B6-050046-102

1.50 10.00 28.00 25.00 B1-028025-100 60.00 56.00 B6-060056-102

1.50 15.00 35.00 32.00 B1-035032-150 70.00 66.00 B6-070066-102

1.50 16.00 35.00 32.00 B8-035032-160 2.00 12.00 40.00 36.00 B1-040036-120

1.50 22.50 48.00 45.00 B1-048045-225 63.00 59.00 B1-063059-120

1.55 4.00 GT-15540 2.00 14.50 50.00 46.00 B1-050046-145

2.00 4.20 GT-20042 2.00 15.00 GT-20150

2.00 6.30 GT-20063 75.00 71.00 B1-075071-150

2.00 8.00 35.00 31.00 B1-035031-080 90.00 86.00 B8-090086-150

49.00 45.00 B8-049045-080 100.00 96.00 B8-100096-150

65.00 61.00 B6-065061-080 105.00 101.00 B6-105101-150

2.00 9.70 GT-20097 115.00 111.00 B6-115111-150

24.00 20.00 B6-024020-096 120.00 116.00 B6-120116-150

25.00 21.00 B6-025021-096 2.00 20.00 GT-20200

26.00 22.00 B6-026022-096 36.00 32.00 B8-036032-200

29.00 25.00 B6-029025-096 45.00 41.00 B1-045041-200

32.00 28.00 B6-032028-096 2.00 25.00 39.00 35.00 B8-039035-250

36.00 32.00 B6-036032-096 49.00 45.00 B8-049045-250

39.00 35.00 B6-039035-096 61.00 57.00 B8-061057-250

40.00 36.00 B6-040036-096 69.00 65.00 B8-069065-250

42.00 38.00 B6-042038-096 2.00 30.00 44.00 40.00 B6-044040-300

44.00 40.00 B6-044040-096 2.00 35.00 69.00 65.00 B8-069065-350

50.00 46.00 B1-050046-096 2.00 40.00 44.00 40.00 B8-044040-400

100.00 96.00 B8-100096-097 2.50 5.00 50.00 45.00 B8-050045-050

2.00 10.00 GT-20100 90.00 85.00 B8-090085-050

50.00 46.00 B1-050046-100 2.50 5.40 71.50 66.50 B6-071066-054

65.00 61.00 B6-065061-100 2.50 5.60 GT-25056

68.00 64.00 B6-068064-100 90.00 85.00 B6-090085-056

70.00 66.00 B1-070066-100 71.00 66.00 B6-071066-056

75.00 71.00 B1-075071-100 30.00 25.00 B6-030025-056
Bearings

80.00 76.00 B6-080076-100 35.00 30.00 B6-035030-056

85.00 81.00 B6-085081-100 40.00 35.00 B6-040035-056

05/06 17/5
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 6

C/S ( Nom) ØD

NR
S E A L S
Max
Ød
Ød +
0.6 x
C/S

Hsg Ln Hsg Ln

c/s L ØD Ød Product Code c/s L ØD Ød Product Code

2.50 5.60 41.00 36.00 B6-041036-056 2.50 8.10 150.00 145.00 B8-150145-081

45.00 40.00 B6-045040-056 170.00 165.00 B8-170165-081

50.00 45.00 B6-050045-056 180.00 175.00 B8-180175-081

55.00 50.00 B6-055050-056 2.50 9.00 50.00 45.00 B8-050045-090

60.00 55.00 B6-060055-056 2.50 9.70 GT-25097

63.00 58.00 B6-063058-056 30.00 25.00 B6-030025-097

65.00 60.00 B6-065060-056 35.00 30.00 B6-035030-097

70.00 65.00 B6-070065-056 40.00 35.00 B6-040035-097

75.00 70.00 B6-075070-056 45.00 40.00 B6-045040-097

80.00 75.00 B6-080075-056 50.00 45.00 B6-050045-097

85.00 80.00 B6-085080-056 55.00 50.00 B6-055050-097

95.00 90.00 B6-095090-056 60.00 55.00 B6-060055-097

100.00 95.00 B6-100095-056 63.00 58.00 B6-063058-097

105.00 100.00 B6-105100-056 65.00 60.00 B6-065060-097

125.00 120.00 B6-125120-056 70.00 65.00 B6-070065-097

2.50 6.00 60.00 55.00 B8-060055-060 75.00 70.00 B6-075070-097

2.50 6.30 GT-25063 80.00 75.00 B6-080075-097

2.50 7.00 50.00 45.00 B8-050045-070 85.00 80.00 B6-085080-097

60.00 55.00 B6-060055-070 90.00 85.00 B6-090085-097

60.00 55.00 B8-060055-070 95.00 90.00 B6-095090-097

70.00 65.00 B6-070065-070 100.00 95.00 B6-100095-097

70.00 65.00 B8-070065-070 110.00 105.00 B6-110105-097

2.50 7.30 60.00 55.00 B8-060055-073 115.00 110.00 B6-115110-097

2.50 8.10 GT-25081 125.00 120.00 B6-125120-097

55.00 50.00 B8-055050-081 135.00 130.00 B6-135130-097

95.00 90.00 B8-095090-081 140.00 135.00 B8-140135-097

110.00 105.00 B8-110105-081 150.00 145.00 B8-150145-097

110.00 105.00 B1-110105-081 160.00 155.00 B8-160155-097

115.00 110.00 B1-115110-081 170.00 165.00 B8-170165-097

120.00 115.00 B1-120115-081 180.00 175.00 B8-180175-097

125.00 120.00 B1-125120-081 2.50 10.00 50.00 45.00 B8-050045-100

130.00 125.00 B1-130125-081 60.00 55.00 B8-060055-100

140.00 135.00 B1-140135-081 75.00 70.00 B1-075070-100

17/6 05/06
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 7

*See Seal Data for Extrusion Gap Ød2=

ØD – (C/S x 0.6)
L L
C/S

( Mi n ) ØD
( n om) Ød1
GT B1 B6 B8

Hsg Ln Hsg Ln

c/s L ØD Ød Product Code c/s L ØD Ød Product Code

2.50 10.00 80.00 75.00 B8-080075-100 2.50 25.00 GT-25250

2.50 12.00 70.00 65.00 B8-070065-120 85.00 80.00 B1-085080-250

2.50 13.00 80.00 75.00 B1-080075-130 130.00 125.00 B8-130125-250

110.00 105.00 B8-110105-130 160.00 155.00 B8-160155-250

2.50 14.50 60.00 55.00 B1-060055-145 180.00 175.00 B8-180175-250

2.50 14.70 60.00 55.00 B8-060055-147 200.00 195.00 B8-200195-250

2.50 15.00 GT-25150 250.00 245.00 B8-250245-250

50.00 45.00 B8-050045-150 300.00 295.00 B8-300295-250

55.00 50.00 B8-055050-150 320.00 315.00 B8-320315-250

60.00 55.00 B8-060055-150 400.00 395.00 B8-400395-250

100.00 95.00 B6-100095-150 2.50 30.00 GT-25300

110.00 105.00 B6-110105-150 55.00 50.00 B8-055050-300

130.00 120.00 B8-130120-150 68.00 63.00 B8-068063-300

120.00 115.00 B8-120115-150 70.00 65.00 B8-070065-300

125.00 120.00 B8-125120-150 75.00 70.00 B8-075070-300

130.00 125.00 B6-130125-150 2.50 32.00 65.00 60.00 B8-065060-320

140.00 135.00 B8-140135-150 2.50 35.00 85.00 80.00 B8-085080-350

150.00 145.00 B8-150145-150 160.00 155.00 B8-160155-350

160.00 155.00 B1-160155-150 2.50 40.00 100.00 95.00 B8-100095-400

160.00 155.00 B8-160155-150 2.50 50.00 75.00 70.00 B8-075070-500

170.00 165.00 B8-170165-150 85.00 80.00 B8-085080-500

180.00 175.00 B8-180175-150 95.00 90.00 B8-095090-500

190.00 185.00 B8-190185-150 2.75 12.50 110.00 104.50 B1-110104-125A

2.50 19.70 65.00 60.00 B8-065060-197 3.00 5.00 50.00 44.00 B1-050044-050
2.50 20.00 GT-25200 3.00 6.00 100.00 94.00 B1-100094-060

45.00 40.00 B8-045040-200 110.00 104.00 B1-110104-060

50.00 45.00 B1-050045-200 120.00 114.00 B1-120114-060

55.00 50.00 B1-055050-200 3.00 9.60 GT-30096

60.00 55.00 B1-060055-200 46.00 40.00 B6-046040-096

63.00 58.00 B1-063058-200 51.00 45.00 B6-051045-096

70.00 65.00 B1-070065-200 54.00 48.00 B6-054048-096

Bearings

80.00 75.00 B1-080075-200 56.00 50.00 B6-056050-096

2.50 20.50 70.00 65.00 B6-070065-205 61.00 55.00 B6-061055-096

05/06 17/7
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 8

C/S ( Nom) ØD

NR
S E A L S
Max
Ød
Ød +
0.6 x
C/S

Hsg Ln Hsg Ln

c/s L ØD Ød Product Code c/s L ØD Ød Product Code

3.00 9.60 170.00 164.00 B8-170164-096 3.00 12.80 95.00 89.00 B6-095089-128

3.00 9.70 80.00 74.00 B6-080074-097 96.00 90.00 B6-096090-128

3.00 10.00 90.00 84.00 B6-090084-100 100.00 94.00 B6-100094-128

90.00 84.00 B8-090084-100 101.00 95.00 B6-101095-128

125.00 119.00 B8-125119-100 106.00 100.00 B6-106100-128

3.00 10.50 55.00 49.00 B1-055049-105 110.00 104.00 B6-110104-128

3.00 12.00 130.00 124.00 B1-130124-120 115.00 109.00 B6-115109-128

140.00 134.00 B8-140134-120 116.00 110.00 B6-116110-128

3.00 12.50 55.00 49.00 B6-055049-125 121.00 115.00 B6-121115-128

60.00 54.00 B6-060054-125 126.00 120.00 B6-126120-128

70.00 64.00 B6-070064-125 130.00 124.00 B6-130124-128

80.00 74.00 B6-080074-125 131.00 125.00 B6-131125-128

90.00 84.00 B1-090084-125 136.00 130.00 B6-136130-128

90.00 84.00 B6-090084-125 140.00 134.00 B6-140134-128

100.00 94.00 B6-100094-125 145.00 139.00 B6-145139-128

110.00 104.00 B6-110104-125 146.00 140.00 B6-146140-128

120.00 114.00 B6-120114-125 156.00 150.00 B6-156150-128

3.00 12.80 GT-30128 3.00 14.50 45.00 39.00 B1-045039-145

56.00 50.00 B6-056050-128 3.00 15.00 GT-30150

57.00 51.00 B6-057051-128 70.00 64.00 B8-070064-150

62.00 56.00 B6-062056-128 90.00 84.00 B1-090084-150

63.00 57.00 B6-063057-128 100.00 94.00 B8-100094-150

65.00 59.00 B6-065059-128 115.00 109.00 B1-115109-150

66.00 60.00 B6-066060-128 120.00 114.00 B8-120114-150

69.00 63.00 B6-069063-128 125.00 119.00 B1-125119-150

70.00 64.00 B6-070064-128 125.00 119.00 B8-125119-150

71.00 65.00 B6-071065-128 128.00 122.00 B6-128122-150

76.00 70.00 B6-076070-128 140.00 134.00 B1-140134-150

80.00 74.00 B6-080074-128 160.00 154.00 B1-160154-150

81.00 75.00 B6-081075-128 190.00 184.00 B8-190184-150

86.00 80.00 B6-086080-128 3.00 15.50 55.00 49.00 B1-055049-155

89.00 83.00 B6-089083-128 65.00 59.00 B1-065059-155

90.00 84.00 B6-090084-128 70.00 64.00 B1-070064-155

17/8 05/06
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 9

*See Seal Data for Extrusion Gap Ød2=

ØD – (C/S x 0.6)
L L
C/S

( Mi n ) ØD
( n om) Ød1
GT B1 B6 B8

Hsg Ln Hsg Ln

c/s L ØD Ød Product Code c/s L ØD Ød Product Code

3.00 15.50 80.00 74.00 B1-080074-155 3.00 19.20 300.00 294.00 B6-300294-192

3.00 15.70 80.00 74.00 B8-080074-157 3.00 19.50 70.00 64.00 B1-070064-195

3.00 19.20 GT-30192 80.00 74.00 B1-080074-195

86.00 80.00 B6-086080-192 3.00 19.60 75.00 69.00 B8-075069-196

96.00 90.00 B6-096090-192 3.00 20.00 GT-30200

101.00 95.00 B6-101095-192 46.00 40.00 B8-046040-200

106.00 100.00 B6-106100-192 85.00 79.00 B8-085079-200

111.00 105.00 B6-111105-192 90.00 84.00 B6-090084-200

121.00 115.00 B6-121115-192 125.00 119.00 B1-125119-200

126.00 120.00 B6-126120-192 140.00 134.00 B1-140134-200

130.00 124.00 B6-130124-192 150.00 144.00 B8-150144-200

131.00 125.00 B6-131125-192 160.00 154.00 B1-160154-200

140.00 134.00 B6-140134-192 180.00 174.00 B1-180174-200

150.00 144.00 B6-150144-192 3.00 22.40 100.00 94.00 B1-100094-224

155.00 149.00 B6-155149-192 110.00 104.00 B1-110104-224

160.00 154.00 B6-160154-192 120.00 114.00 B1-120114-224

165.00 159.00 B6-165159-192 3.00 22.50 51.00 45.00 B8-051045-225

166.00 160.00 B6-166160-192 3.00 24.50 105.00 99.00 B1-105099-245

170.00 164.00 B6-170164-192 3.00 24.60 80.00 74.00 B8-080074-246

171.00 165.00 B6-171165-192 90.00 84.00 B8-090084-246

176.00 170.00 B6-176170-192 3.00 25.00 GT-30250

180.00 174.00 B6-180174-192 56.00 50.00 B8-056050-250

200.00 194.00 B6-200194-192 62.00 56.00 B8-062056-250

216.00 210.00 B6-216210-192 80.00 74.00 B8-080074-250

226.00 220.00 B6-226220-192 85.00 79.00 B8-085079-250

230.00 224.00 B6-230224-192 86.00 80.00 B1-086080-250

236.00 230.00 B6-236230-192 90.00 84.00 B1-090084-250

250.00 244.00 B6-250244-192 100.00 94.00 B1-100094-250

256.00 250.00 B6-256250-192 100.00 94.00 B8-100094-250

260.00 254.00 B6-260254-192 110.00 104.00 B1-110104-250

266.00 260.00 B6-266260-192 120.00 114.00 B8-120114-250

Bearings

270.00 264.00 B6-270264-192 3.00 30.00 GT-30300

280.00 274.00 B6-280274-192 100.00 94.00 B8-100094-300

05/06 17/9
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 10

C/S ( Nom) ØD

NR
S E A L S
Max
Ød
Ød +
0.6 x
C/S

Hsg Ln Hsg Ln

c/s L ØD Ød Product Code c/s L ØD Ød Product Code

3.00 30.00 110.00 104.00 B1-110104-300 3.50 15.00 165.00 158.00 B8-165158-150

120.00 114.00 B1-120114-300 170.00 163.00 B8-170163-150

130.00 124.00 B8-130124-300 180.00 173.00 B8-180173-150

140.00 134.00 B8-140134-300 3.50 16.80 125.00 118.00 B8-125118-168

3.00 31.50 69.00 63.00 B8-069063-315 3.50 17.50 140.00 133.00 B1-140133-175

3.00 35.00 GT-30350 3.50 20.00 140.00 133.00 B8-140133-200

76.00 70.00 B8-076070-350 150.00 143.00 B1-150143-200

120.00 114.00 B1-120114-350 150.00 143.00 B8-150143-200

160.00 154.00 B8-160154-350 160.00 153.00 B1-160153-200

3.00 40.00 GT-30400 160.00 153.00 B8-160153-200

86.00 80.00 B8-086080-400 3.50 30.00 120.00 113.00 B8-120113-300

3.00 42.00 150.00 144.00 B8-150144-420 130.00 123.00 B1-130123-300

3.00 50.00 86.00 80.00 B1-086080-500 3.50 35.00 140.00 133.00 B1-140133-350

140.00 134.00 B8-140134-500 150.00 143.00 B1-150143-350

160.00 154.00 B8-160154-500 150.00 143.00 B8-150143-350

3.10 5.00 63.00 56.80 B1-063056-050 3.50 40.00 130.00 123.00 B1-130123-400

3.10 8.00 115.00 108.80 B1-115108-080 140.00 133.00 B8-140133-400

3.10 15.00 110.00 103.80 B1-110103-150 150.00 143.00 B8-150143-400

3.12 20.00 140.00 133.76 B1-140133-200 160.00 153.00 B1-160153-400

3.25 60.00 200.00 193.50 B1-200193-600 160.00 153.00 B8-160153-400

220.00 213.50 B1-220213-600 170.00 163.00 B8-170163-400

3.30 12.60 50.00 43.40 B8-050043-126 3.50 45.00 150.00 143.00 B1-150143-450

3.50 9.70 145.00 138.00 B8-145138-097 160.00 153.00 B1-160153-450

3.50 10.00 135.00 128.00 B8-135128-100 4.00 6.00 GT-40060

3.50 15.00 120.00 113.00 B8-120113-150 100.00 92.00 B8-100092-060

125.00 118.00 B8-125118-150 115.00 107.00 B1-115107-060

130.00 123.00 B8-130123-150 120.00 112.00 B8-120112-060

130.00 123.00 B1-130123-150 4.00 6.30 GT-40063

135.00 128.00 B1-135128-150 4.00 8.10 GT-40081

140.00 133.00 B8-140133-150 150.00 142.00 B8-150142-081

145.00 138.00 B1-145138-150 4.00 9.70 GT-40097

150.00 143.00 B1-150143-150 4.00 15.00 GT-40150

160.00 153.00 B8-160153-150 115.00 107.00 B8-110102-150

17/10 05/06
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 11

*See Seal Data for Extrusion Gap Ød2=

ØD – (C/S x 0.6)
L L
C/S

( Mi n ) ØD
( n om) Ød1
GT B1 B6 B8

Hsg Ln Hsg Ln

c/s L ØD Ød Product Code c/s L ØD Ød Product Code

4.00 15.00 153.00 145.00 B6-153145-150 4.00 40.00 180.00 172.00 B8-180172-400

165.00 157.00 B8-165157-150 200.00 192.00 B8-200192-400

170.00 162.00 B8-170162-150 4.00 45.00 180.00 172.00 B1-180172-450

178.00 170.00 B6-178170-150 190.00 182.00 B1-190182-450

204.00 196.00 B6-204196-150 200.00 192.00 B1-200192-450

230.00 222.00 B6-230222-150 224.00 216.00 B1-224216-450

256.00 248.00 B6-256248-150 225.00 217.00 B8-225217-450

4.00 20.00 GT-40200 4.00 50.00 170.00 162.00 B1-170162-500

113.00 105.00 B8-113105-200 225.00 217.00 B8-225217-500

130.00 122.00 B8-130122-200 4.00 55.00 180.00 172.00 B8-180172-550

140.00 132.00 B8-140132-200 190.00 182.00 B1-190182-550

165.00 157.00 B8-165157-200 250.00 242.00 B1-250242-550

180.00 172.00 B8-180172-200 4.00 60.00 280.00 272.00 B1-280272-600

4.00 22.00 180.00 172.00 B8-180172-220 4.50 12.50 90.00 81.00 B1-090081-125

200.00 192.00 B1-200192-220 100.00 91.00 B8-100091-125

4.00 22.50 180.00 172.00 B1-180172-225 105.00 96.00 B8-105096-125

4.00 25.00 GT-40250 4.50 15.00 115.00 106.00 B8-115106-150

90.00 82.00 B8-090082-250 120.00 111.00 B8-120111-150

160.00 152.00 B8-160152-250 5.00 15.00 135.00 125.00 B1-135125-150

170.00 162.00 B8-170162-250 135.00 125.00 B8-135125-150

180.00 172.00 B6-180172-250 5.00 30.00 68.00 58.00 B8-068058-300

200.00 192.00 B8-200192-250 5.00 40.00 105.00 95.00 B8-105095-400

225.00 217.00 B1-225217-250 6.00 17.50 140.00 128.00 B8-140128-175

4.00 30.00 GT-40300 150.00 138.00 B1-150138-175

58.00 50.00 B8-058050-300 6.00 20.00 160.00 148.00 B1-160148-200

129.00 121.00 B6-129121-300 160.00 148.00 B8-160148-200

154.00 146.00 B6-154146-300 6.00 22.50 180.00 168.00 B8-180168-225

179.00 171.00 B6-179171-300 185.00 173.00 B8-185173-225

205.00 197.00 B6-205197-300 200.00 188.00 B1-200188-225

231.00 223.00 B6-231223-300 6.00 25.00 225.00 213.00 B1-225213-250

257.00 249.00 B6-257249-300 6.00 27.50 250.00 238.00 B1-250238-275

Bearings

4.00 40.00 GT-40400 260.00 248.00 B1-260248-275

175.00 167.00 B8-175167-400 6.00 30.00 300.00 288.00 B1-300288-300

05/06 17/11
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 12

C/S ( Nom) ØD

NR
S E A L S
Max
Ød
Ød +
0.6 x
C/S

Hsg Ln

c/s L ØD Ød Product Code

8.50 20.00 160.00 143.00 B8-160143-200

17/12 05/06
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 1

DUB
NR
Du Bushes

S E A L S

Design
Bearings

The bush is a thin-walled steel bush, axially split, with its

inside diameter bronze-plated then PTFE coated. The bush
can be used in dry environments and is ideal as a rod guide
bearing in hydraulic cylinders. It can be fitted between the
rod seal and the rod wiper, or on the pressure side of the rod
seal. The PTFE coating has a very low coefficient of friction
to help eliminate stick-slip, particularly in low speed
applications, and is impervious to almost any chemical
attack. The bush is axially split to facillitate fitting, however
an appropriate tool should be used on a press.

Key Features
Low coefficient of friction Operating Conditions

Excellent wear resistance Temperature

-195° to 270°C
Wide temperature range -319° to 518°F

Speed
Excellent dimensional
4.0m /sec
stability 12'/sec

Excellent chemical Surface Finish µmRa

ØD Ød L
resistance 0.1-0.25 ≤0.8 0.20

ØD Tolerances
Ød ØD Ød L
H8 f9 -0.00
+0.25

Chamfer Radii
r
0.2

Typical Examples
Reciprocating Rotary Oscillating Helix

L Similar Styles

05/06 18/1
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 2
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 3

ØD

Ød

Ød ØD L Product Code Ød ØD L Product Code

3.00 5.00 3.00 DUB-003005-030 18.00 20.00 5.00 DUB-018020-050

5.00 4.00 DUB-003005-040 20.00 12.00 DUB-018020-120

5.00 5.00 DUB-003005-050 20.00 25.00 DUB-018020-250

5.00 6.00 DUB-003005-060 20.00 23.00 12.00 DUB-020023-120

4.00 6.00 4.00 DUB-004006-040 23.00 15.00 DUB-020023-150

6.00 6.00 DUB-004006-060 23.00 20.00 DUB-020023-200

6.00 8.00 DUB-004006-080 23.00 25.00 DUB-020023-250

5.00 7.00 4.00 DUB-005007-040 23.00 30.00 DUB-020023-300

6.00 8.00 6.00 DUB-006008-060 22.00 25.00 15.00 DUB-022025-150

8.00 8.00 DUB-006008-080 25.00 20.00 DUB-022025-200

8.00 10.00 DUB-006008-100 25.00 25.00 DUB-022025-250

7.00 9.00 8.00 DUB-007009-080 24.00 27.00 15.00 DUB-024027-150

8.00 10.00 8.00 DUB-008010-080 27.00 20.00 DUB-024027-200

10.00 10.00 DUB-008010-100 27.00 25.00 DUB-024027-250

10.00 12.00 DUB-008010-120 27.00 30.00 DUB-024027-300

10.00 15.00 DUB-008010-150 25.00 28.00 12.00 DUB-025028-120

10.00 12.00 6.00 DUB-010012-060 28.00 15.00 DUB-025028-150

12.00 8.00 DUB-010012-080 28.00 20.00 DUB-025028-200

12.00 10.00 DUB-010012-100 28.00 25.00 DUB-025028-250

12.00 12.00 DUB-010012-120 28.00 30.00 DUB-025028-300

12.00 20.00 DUB-010012-200 28.00 35.00 DUB-025028-350

12.00 14.00 6.00 DUB-012014-060 28.00 32.00 20.00 DUB-028032-200

14.00 8.00 DUB-012014-080 32.00 25.00 DUB-028032-250

14.00 12.00 DUB-012014-120 32.00 30.00 DUB-028032-300

14.00 16.00 10.00 DUB-014016-100 32.00 40.00 DUB-028032-400

16.00 12.00 DUB-014016-120 30.00 34.00 12.00 DUB-030034-120

16.00 15.00 DUB-014016-150 34.00 15.00 DUB-030034-150

15.00 17.00 20.00 DUB-015017-200 34.00 20.00 DUB-030034-200

16.00 18.00 5.00 DUB-016018-050 34.00 25.00 DUB-030034-250

18.00 10.00 DUB-016018-100 34.00 30.00 DUB-030034-300

18.00 12.00 DUB-016018-120 34.00 35.00 DUB-030034-350
Bearings

18.00 15.00 DUB-016018-150 34.00 40.00 DUB-030034-400

18.00 25.00 DUB-016018-250 31.00 35.00 25.00 DUB-031035-250

05/06 18/3
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 4

ØD

NR
S E A L S
Ød

Ød ØD L Product Code Ød ØD L Product Code

31.00 35.00 40.00 DUB-031035-400 50.00 55.00 25.00 DUB-050055-250

32.00 36.00 20.00 DUB-032036-200 55.00 30.00 DUB-050055-300

36.00 25.00 DUB-032036-250 55.00 35.00 DUB-050055-350

36.00 40.00 DUB-032036-400 55.00 40.00 DUB-050055-400

35.00 39.00 20.00 DUB-035039-200 55.00 50.00 DUB-050055-500

39.00 25.00 DUB-035039-250 55.00 60.00 DUB-050055-600

39.00 30.00 DUB-035039-300 55.00 60.00 12.00 DUB-055060-120

39.00 35.00 DUB-035039-350 60.00 25.00 DUB-055060-250

39.00 40.00 DUB-035039-400 60.00 30.00 DUB-055060-300

39.00 45.00 DUB-035039-450 60.00 35.00 DUB-055060-350

39.00 50.00 DUB-035039-500 60.00 40.00 DUB-055060-400

38.00 42.00 20.00 DUB-038042-200 60.00 50.00 DUB-055060-500

42.00 25.00 DUB-038042-250 60.00 60.00 DUB-055060-600

42.00 30.00 DUB-038042-300 60.00 65.00 15.00 DUB-060065-150

42.00 35.00 DUB-038042-350 65.00 30.00 DUB-060065-300

42.00 40.00 DUB-038042-400 65.00 35.00 DUB-060065-350

40.00 44.00 12.00 DUB-040044-120 65.00 40.00 DUB-060065-400

44.00 15.00 DUB-040044-150 65.00 50.00 DUB-060065-500

44.00 25.00 DUB-040044-250 65.00 60.00 DUB-060065-600

44.00 30.00 DUB-040044-300 65.00 70.00 30.00 DUB-065070-300

44.00 35.00 DUB-040044-350 70.00 35.00 DUB-065070-350

44.00 40.00 DUB-040044-400 70.00 40.00 DUB-065070-400

44.00 50.00 DUB-040044-500 70.00 75.00 12.00 DUB-070075-120

45.00 50.00 20.00 DUB-045050-200 75.00 25.00 DUB-070075-250

50.00 25.00 DUB-045050-250 75.00 30.00 DUB-070075-300

50.00 30.00 DUB-045050-300 75.00 35.00 DUB-070075-350

50.00 35.00 DUB-045050-350 75.00 40.00 DUB-070075-400

50.00 40.00 DUB-045050-400 75.00 50.00 DUB-070075-500

50.00 45.00 DUB-045050-450 75.00 60.00 DUB-070075-600

50.00 50.00 DUB-045050-500 75.00 70.00 DUB-070075-700

50.00 55.00 12.00 DUB-050055-120 75.00 80.00 DUB-070075-800

55.00 15.00 DUB-050055-150 75.00 80.00 15.00 DUB-075080-150

55.00 20.00 DUB-050055-200 80.00 30.00 DUB-075080-300

18/4 05/06
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 5

ØD

Ød

Ød ØD L Product Code Ød ØD L Product Code

75.00 80.00 35.00 DUB-075080-350 100.00 105.00 40.00 DUB-100105-400

80.00 40.00 DUB-075080-400 105.00 45.00 DUB-100105-450

80.00 50.00 DUB-075080-500 105.00 50.00 DUB-100105-500

80.00 60.00 DUB-075080-600 105.00 60.00 DUB-100105-600

80.00 80.00 DUB-075080-800 105.00 70.00 DUB-100105-700

80.00 85.00 15.00 DUB-080085-150 105.00 90.00 DUB-100105-900

85.00 20.00 DUB-080085-200 105.00 95.00 DUB-100105-950

85.00 30.00 DUB-080085-300 105.00 110.00 30.00 DUB-105110-300

95.00 35.00 DUB-080085-350 110.00 35.00 DUB-105110-350

85.00 40.00 DUB-080085-400 110.00 40.00 DUB-105110-400

85.00 50.00 DUB-080085-500 110.00 45.00 DUB-105110-450

85.00 60.00 DUB-080085-600 110.00 50.00 DUB-105110-500

85.00 80.00 DUB-080085-800 110.00 70.00 DUB-105110-700

85.00 90.00 15.00 DUB-085090-150 110.00 115.00 30.00 DUB-110115-300

90.00 35.00 DUB-085090-350 115.00 35.00 DUB-110115-350

90.00 40.00 DUB-085090-400 115.00 40.00 DUB-110115-400

90.00 50.00 DUB-085090-500 115.00 45.00 DUB-110115-450

90.00 60.00 DUB-085090-600 115.00 50.00 DUB-110115-500

90.00 95.00 20.00 DUB-090095-200 115.00 55.00 DUB-110115-550

95.00 30.00 DUB-090095-300 115.00 60.00 DUB-110115-600

95.00 35.00 DUB-090095-350 115.00 70.00 DUB-110115-700

95.00 40.00 DUB-090095-400 115.00 80.00 DUB-110115-800

95.00 45.00 DUB-090095-450 115.00 95.00 DUB-110115-950

95.00 50.00 DUB-090095-500 115.00 120.00 35.00 DUB-115120-350

95.00 60.00 DUB-090095-600 120.00 40.00 DUB-115120-400

95.00 90.00 DUB-090095-900 120.00 50.00 DUB-115120-500

95.00 100.00 30.00 DUB-095100-300 120.00 60.00 DUB-115120-600

100.00 35.00 DUB-095100-350 120.00 125.00 20.00 DUB-120125-200

100.00 45.00 DUB-095100-450 125.00 35.00 DUB-120125-350

100.00 60.00 DUB-095100-600 125.00 40.00 DUB-120125-400

100.00 105.00 20.00 DUB-100105-200 125.00 50.00 DUB-120125-500
Bearings

105.00 30.00 DUB-100105-300 125.00 60.00 DUB-120125-600

105.00 35.00 DUB-100105-350 125.00 70.00 DUB-120125-700

05/06 18/5
NRS294-NR Seals Metric 17 8/30/05 2:28 PM Page 6

ØD

NR
S E A L S
Ød

Ød ØD L Product Code

120.00 125.00 95.00 DUB-120125-950

125.00 100.00 DUB-120125-998

130.00 135.00 35.00 DUB-130135-350

135.00 50.00 DUB-130135-500

135.00 80.00 DUB-130135-800

135.00 95.00 DUB-130135-950

140.00 145.00 35.00 DUB-140145-350

145.00 40.00 DUB-140145-400

145.00 50.00 DUB-140145-500

145.00 70.00 DUB-140145-700

145.00 80.00 DUB-140145-800

145.00 100.00 DUB-140145-998

150.00 155.00 50.00 DUB-150155-500

155.00 80.00 DUB-150155-800

155.00 100.00 DUB-150155-998

160.00 165.00 35.00 DUB-160165-350

165.00 50.00 DUB-160165-500

165.00 90.00 DUB-160165-900

180.00 185.00 100.00 DUB-180185-100

185.00 120.00 DUB-180185-120

190.00 195.00 40.00 DUB-190195-400

195.00 80.00 DUB-190195-800

200.00 205.00 100.00 DUB-200205-100

205.00 20.00 DUB-200205-200

230.00 235.00 50.00 DUB-230235-500

18/6 05/06
 Ancillary
O-rings, Backup Washers & Quad Rings

NR
S E A L S

Design
Ancillary

O-rings, Quad rings and Back up washers are almost entirely

used as static seals. Generally O-rings and Quad rings should
be backed up for pressures above 1500 Psi, however, the
operating environment must always be considered, regardless
of operating pressure. The groove dimension table below is
based on static use only. For dynamic applications, please
consult our technical staff.

Static Housing Data

Ring and Groove Dimensions

O-ring C/S Housing Depth Housing Width
r1 T S L L1 L2
T L2 mm Inch Max Min
1.00 0.80 0.75 1.30
1.20 0.96 0.91 1.56
r2
1.50 1.20 1.15 1.95
S 1.60 1.28 1.23 2.08 3.80* 5.20*
1.78 1/16 1.44 1.39 2.36 3.76 5.16
1.90 1.53 1.48 2.50 3.90 5.30
2.00 1.60 1.55 2.60 4.00 5.40
2.40 1.92 1.87 3.20 4.60 6.00
2.50 2.00 1.95 3.25 4.65 6.05
2.62 3/32 2.08 2.03 3.57 4.97 6.37
S 2.70 2.13 2.08 3.50 4.97* 6.37*
r1
r2 3.00 2.50 2.30 3.90 5.30 6.70
3.10 2.52 2.32 4.10 5.50 6.90
3.50 2.90 2.70 4.55 5.95 7.35
L L1
3.53 1/8 2.90 2.70 4.75 6.15 7.55
4.00 3.30 3.10 5.20 6.90* 8.60*
5.00 4.15 3.85 6.50 8.20* 9.90*
5.33 3/16 4.42 4.12 7.15 8.85 10.55
5.70 5.00 4.85 7.50 9.20 10.90
6.00 5.00 4.85 7.80 9.50* 11.20*
6.99 1/4 6.00 6.85 9.54 12.04 14.54
8.40 7.40 7.25 11.00 13.50 16.00
*Check availability, not normally stocked

Chamfer Radii
T r1 r2
L (no BU’s) 1.00 - 2.62 0.10 0.25
3.00 - 8.40 0.20 0.63
L1 & L2 1.78 - 4.00 0.25 0.25
5.00 - 8.40 0.25 0.25

05/06 19/1
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
0.00 0.00 1.50 G 000015
0.00 0.00 1.78 1/16 G G 000070
0.00 0.00 2.00 G 000020
0.00 0.00 2.40 G 000024
0.00 0.00 2.50 G 000025
0.00 0.00 2.62 3/32 G G 000103
0.00 0.00 3.00 G G 000030
0.00 0.00 3.53 1/8 G G G 000139
0.00 0.00 4.00 G G 000040
0.00 0.00 5.00 G G 000050
0.00 0.00 5.33 3/16 G G G 000210
0.00 0.00 5.70 G 000057
0.00 0.00 6.00 G 000060
0.00 0.00 6.99 1/4 G G G 000275
0.00 0.00 8.40 G 000084
0.79 2.39 1.02 G G 001
1.17 3.56 1.27 G G 002
1.57 4.75 1.52 G G 003
1.57 6.35 2.62 3/32 G G G G 102
1.98 5.16 1.78 1/16 G G G G G G 004
2.00 3.60 1.00 G G 002010
2.00 4.40 1.50 G 002015
2.36 5.54 1.78 1/16 G G G G G G 005
2.36 7.14 2.62 3/32 G G G 103
2.50 4.10 1.00 G 002510
2.50 4.90 1.50 G 002515
2.50 5.00 1.60 G 002516
2.50 5.50 2.00 G 002520
3.00 4.60 1.00 G G 003010
3.00 5.40 1.50 G G G 003015
3.00 6.00 1.90 G G G G 003019
3.00 6.00 2.00 G G 003020
3.18 6.35 1.78 1/16 G G G G G G G 006
3.18 7.92 2.62 3/32 G G G G 104
G
Rings & Washers

3.50 5.90 1.50 003515

Ancillary

3.50 6.00 1.60 G G 003516

3.96 7.14 1.78 1/16 G G G G G G 007
Metric sizes denoted by yellow shading

05/06 19/3
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
3.96 8.71 2.62 3/32 G G G G G 105
4.00 5.60 1.00 G 004010
4.00 6.40 1.50 G G 004015
4.00 7.00 1.90 G G G G 004019
4.00 7.00 2.00 G G G 004020
4.00 8.00 2.40 G 004024
4.00 8.00 2.50 G G 004025
4.50 6.10 1.00 G 004510
4.50 6.90 1.50 G 004515
4.50 7.00 1.60 G G 004516
4.70 7.54 1.42 G G V9 901
4.75 7.92 1.78 1/16 G G G G G G G 008
4.75 9.53 2.62 3/32 G G G G G 106
4.75 11.10 3.53 1/8 G G G 201
5.00 6.60 1.00 G G 005010
5.00 7.40 1.50 G G 005015
5.00 8.00 1.90 G G G G 005019
5.00 8.00 2.00 G G 005020
5.00 9.00 2.40 G 005024
5.00 9.00 2.50 G G G 005025
5.50 7.90 1.50 G 005515
5.50 8.00 1.60 G G 005516
5.54 8.71 1.78 1/16 G G G G G G G 009
5.54 10.31 2.62 3/32 G G G G 107
6.00 7.60 1.00 G G 006010
6.00 8.40 1.50 G G 006015
6.00 9.00 1.90 G G G G 006019
6.00 9.00 2.00 G G G 006020
6.00 10.00 2.40 G 006024
6.00 10.00 2.50 G G G 006025
6.00 11.00 3.00 G G 006030
6.07 9.32 1.63 G G V9 902
6.35 9.53 1.78 1/16 G G G G G G G G 010
6.35 11.10 2.62 3/32 G G G G G G 108
6.35 12.70 3.53 1/8 G G G G G G 202
6.50 8.10 1.00 G G 006510
6.50 9.00 1.60 G G 006516
Metric sizes denoted by yellow shading

19/4 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
6.76 9.91 1.78 1/16 G 610
7.00 8.60 1.00 G 007010
7.00 9.40 1.50 G G G 007015
7.00 10.00 1.90 G G G G 007019
7.00 10.00 2.00 G G 007020
7.00 11.00 2.40 G 007024
7.00 11.00 2.50 G G G 007025
7.00 12.00 3.00 G 007030
7.50 9.90 1.50 G 007515
7.50 10.00 1.60 G G 007516
7.65 10.90 1.63 G G V9 903
7.92 11.10 1.78 1/16 G G G G G G G G 011
7.92 12.70 2.62 3/32 G G G G G G G 109
7.92 14.27 3.53 1/8 G G G G 203
8.00 9.60 1.00 G G 008010
8.00 10.40 1.50 G G 008015
8.00 11.00 1.90 G G G G 008019
8.00 11.00 2.00 G G G 008020
8.00 12.00 2.40 G G 008024
8.00 12.00 2.50 G G G G 008025
8.00 13.00 3.00 G G 008030
8.00 15.00 4.00 G 008040
8.00 17.00 5.00 G 008050
8.50 11.00 1.60 G G 008516
8.74 11.91 1.78 1/16 G 611
8.92 12.57 1.83 G G V9 904
9.00 10.60 1.00 G G 009010
9.00 11.40 1.50 G G 009015
9.00 12.00 1.90 G G G G 009019
9.00 12.00 2.00 G G G 009020
9.00 13.00 2.40 G G 009024
9.00 13.00 2.50 G G G 009025
9.00 14.00 3.00 G G 009030
9.50 12.00 1.60 G G 009516
G G G G G G G G
Rings & Washers

9.53 12.70 1.78 1/16 012

Ancillary

9.53 14.27 2.62 3/32 G G G G G G G G 110

9.53 15.88 3.53 1/8 G G G G G G G 204
Metric sizes denoted by yellow shading

05/06 19/5
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
10.00 11.60 1.00 G G G 010010
10.00 12.40 1.50 G G G 010015
10.00 13.00 1.90 G G G G 010019
10.00 13.00 2.00 G G G 010020
10.00 14.00 2.40 G G G G 010024
10.00 14.00 2.50 G G G G 010025
10.00 15.00 3.00 G G 010030
10.00 17.00 4.00 G 010040
10.00 19.00 5.00 G 010050
10.31 15.06 2.62 3/32 G 110A
10.50 13.00 1.60 G G 010516
10.52 14.17 1.83 G G V9 905
11.00 12.60 1.00 G 011010
11.00 13.40 1.50 G G 011015
11.00 14.00 2.00 G G 011020
11.00 15.00 2.40 G G G G 011024
11.00 15.00 2.50 G G G G G 011025
11.00 16.00 3.00 G G 011030
11.10 14.27 1.78 1/16 G G G G G G G G 013
11.10 15.88 2.62 3/32 G G G G G G G G 111
11.10 17.45 3.53 1/8 G G G G G G 205
11.10 20.62 5.33 3/16 G G G 309
11.50 14.00 1.60 G G 011516
11.89 15.85 1.98 G G V9 906
12.00 13.60 1.00 G 012010
12.00 14.40 1.50 G G 012015
12.00 15.00 2.00 G G G 012020
12.00 16.00 2.40 G G G G 012024
12.00 16.00 2.50 G G G G 012025
12.00 17.00 3.00 G G 012030
12.50 15.00 1.60 G 012516
12.70 15.88 1.78 1/16 G G G G G G G G 014
12.70 17.45 2.62 3/32 G G G G G G G G 112
12.70 19.05 3.53 1/8 G G G G G G 206
12.70 22.23 5.33 3/16 G G G 310
13.00 14.60 1.00 G 013010
13.00 15.40 1.50 G G G 013015
Metric sizes denoted by yellow shading

19/6 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
13.00 16.00 2.00 G G 013020
13.00 17.00 2.40 G G G 013024
13.00 17.00 2.50 G G G G 013025
13.00 18.00 3.00 G G 013030
13.46 17.63 2.08 G G V9 907
13.50 16.00 1.60 G G 013516
14.00 15.60 1.00 G G 014010
14.00 16.40 1.50 G G G 014015
14.00 17.00 2.00 G G G 014020
14.00 18.00 2.40 G G G G 014024
14.00 18.00 2.50 G G G 014025
14.00 19.00 3.00 G G 014030
14.27 17.45 1.78 1/16 G G G G G G G G 015
14.27 19.05 2.62 3/32 G G G G G G G G 113
14.27 20.62 3.53 1/8 G G G G G G 207
14.27 23.80 5.33 3/16 G G G 311
14.50 17.00 1.60 G G 014516
15.00 16.60 1.00 G 015010
15.00 17.40 1.50 G G 015015
15.00 18.00 2.00 G G 015020
15.00 19.00 2.40 G G G G 015024
15.00 19.00 2.50 G G G 015025
15.00 19.00 2.50 G 015925
15.00 20.00 3.00 G G G 015030
15.00 22.00 4.00 G 015040
15.00 24.00 5.00 G 015050
15.50 18.00 1.60 G G 015516
15.88 19.05 1.78 1/16 G G G G G G G G 016
15.88 20.62 2.62 3/32 G G G G G G G G 114
15.88 22.23 3.53 1/8 G G G G G G 208
15.88 25.40 5.33 3/16 G G G G 312
16.00 17.60 1.00 G 016010
16.00 18.40 1.50 G G 016015
16.00 19.00 2.00 G G G 016020
G G G G
Rings & Washers

16.00 20.00 2.40 016024

Ancillary

16.00 20.00 2.50 G G G G 016025

16.00 21.00 3.00 G G 016030
Metric sizes denoted by yellow shading

05/06 19/7
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
16.00 23.00 4.00 G 016040
16.36 20.78 2.21 G G V9 908
16.50 19.00 1.60 G 016516
17.00 19.40 1.50 G G 017015
17.00 20.00 2.00 G G G 017020
17.00 21.00 2.40 G G G 017024
17.00 21.00 2.50 G G G G 017025
17.00 22.00 3.00 G G G 017030
17.00 24.00 4.00 G 017040
17.45 20.62 1.78 1/16 G G G G G G G G 017
17.45 22.23 2.62 3/32 G G G G G G G G 115
17.45 23.80 3.53 1/8 G G G G G G 209
17.45 26.97 5.33 3/16 G G G 313
17.50 20.00 1.60 G G 017516
17.93 22.86 2.46 G G V9 909
18.00 19.60 1.00 G 018010
18.00 20.40 1.50 G G G 018015
18.00 21.00 2.00 G G G 018020
18.00 22.00 2.40 G G G G 018024
18.00 22.00 2.50 G G G G 018025
18.00 23.00 3.00 G G 018030
18.00 25.00 4.00 G 018040
18.24 23.01 2.62 3/32 G 115A
18.50 21.00 1.60 G 018516
19.00 21.40 1.50 G G G 019015
19.00 22.00 2.00 G G 019020
19.00 23.00 2.40 G G G G 019024
19.00 23.00 2.50 G G G 019025
19.00 24.00 3.00 G G 019030
19.00 26.00 4.00 G G 019040
19.05 22.23 1.78 1/16 G G G G G G G 018
19.05 23.80 2.62 3/32 G G G G G G G G 116
19.05 25.40 3.53 1/8 G G G G G G G G 210
19.05 28.58 5.33 3/16 G G G G G 314
19.18 24.10 2.46 G G V9 910
19.50 22.00 1.60 G 019516
20.00 21.60 1.00 G 020010
Metric sizes denoted by yellow shading

19/8 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
20.00 22.40 1.50 G G 020015
20.00 23.00 2.00 G G G 020020
20.00 24.00 2.40 G G G G 020024
20.00 24.00 2.50 G G 020025
20.00 25.00 3.00 G G G G 020030
20.00 27.00 4.00 G 020040
20.00 29.00 5.00 G 020050
20.62 23.80 1.78 1/16 G G G G G G G 019
20.62 25.40 2.62 3/32 G G G G G G G G 117
20.62 26.97 3.53 1/8 G G G G G G G G 211
20.62 30.15 5.33 3/16 G G G 315
21.00 22.60 1.00 G 021010
21.00 23.40 1.50 G 021015
21.00 24.00 2.00 G G 021020
21.00 25.00 2.40 G G G G 021024
21.00 25.00 2.50 G G 021025
21.00 26.00 3.00 G G 021030
21.00 28.00 4.00 G 021040
21.92 27.81 2.95 G G V9 911
22.00 24.40 1.50 G G G 022015
22.00 25.00 2.00 G G 022020
22.00 26.00 2.40 G G G G 022024
22.00 26.00 2.50 G G 022025
22.00 27.00 3.00 G G 022030
22.00 28.00 3.50 G G G G 022035
22.00 29.00 4.00 G G 022040
22.00 32.00 6.00 G 002206
22.23 25.40 1.78 1/16 G G G G G G G G 020
22.23 26.97 2.62 3/32 G G G G G G G G 118
22.23 28.58 3.53 1/8 G G G G G G G G 212
22.23 31.75 5.33 3/16 G G G G G 316
22.50 25.00 1.60 G G 022516
23.00 25.40 1.50 G G 023015
23.00 26.00 2.00 G G G 023020
G G
Rings & Washers

23.00 27.00 2.50 023025

Ancillary

23.00 28.00 3.00 G G G 023030

23.00 30.00 4.00 G 023040
Metric sizes denoted by yellow shading

05/06 19/9
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
23.47 29.36 2.95 G G V9 912
23.80 26.97 1.78 1/16 G G G G G G 021
23.80 28.58 2.62 3/32 G G G G G G G G 119
23.80 30.15 3.53 1/8 G G G G G G G G 213
23.80 33.32 5.33 3/16 G G G G 317
24.00 26.40 1.50 G G 024015
24.00 27.00 2.00 G G G 024020
24.00 28.00 2.50 G G G 024025
24.00 29.00 3.00 G G 024030
24.00 30.00 3.50 G G G G 024035
24.00 31.00 4.00 G 024040
25.00 27.40 1.50 G 025015
25.00 28.00 2.00 G G 025020
25.00 29.00 2.40 G G 025024
25.00 29.00 2.50 G G G 025025
25.00 30.00 3.10 G G G G G 025031
25.00 31.00 3.50 G G G G 025035
25.00 32.00 4.00 G G 025040
25.00 34.00 5.00 G 025050
25.00 35.00 6.00 G 025060
25.04 30.94 2.95 G G V9 913
25.40 28.58 1.78 1/16 G G G G G G G G 022
25.40 30.15 2.62 3/32 G G G G G G G G 120
25.40 31.75 3.53 1/8 G G G G G G G G 214
25.40 34.93 5.33 3/16 G G G G G G 318
25.50 28.00 1.60 G G 025516
26.00 28.40 1.50 G G 026015
26.00 29.00 2.00 G G 026020
26.00 30.00 2.50 G G 026025
26.00 31.00 3.00 G G 026030
26.00 32.00 3.50 G G G G 026035
26.00 33.00 4.00 G 026040
26.59 32.49 2.95 G G V9 914
26.97 30.15 1.78 1/16 G G G G G G G G 023
26.97 31.75 2.62 3/32 G G G G G G G G 121
26.97 33.32 3.53 1/8 G G G G G G G G 215
26.97 36.50 5.33 3/16 G G G G G G 319
Metric sizes denoted by yellow shading

19/10 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
27.00 29.40 1.50 G 027015
27.00 30.00 2.00 G G 027020
27.00 31.00 2.50 G G G 027025
27.00 32.00 3.00 G G G G G 027030
27.50 30.00 1.60 G 027516
28.00 30.40 1.50 G G 028015
28.00 31.00 2.00 G G 028020
28.00 32.00 2.40 G 028024
28.00 32.00 2.50 G G 028025
28.00 33.00 3.00 G G 028030
28.00 34.00 3.50 G G G G 028035
28.00 35.00 4.00 G 028040
28.00 37.00 5.00 G 028050
28.58 31.75 1.78 1/16 G G G G G G G G 024
28.58 33.32 2.62 3/32 G G G G G G G G 122
28.58 34.93 3.53 1/8 G G G G G G G G 216
28.58 38.10 5.33 3/16 G G G G G G 320
29.00 31.40 1.50 G 029015
29.00 32.00 2.00 G G 029020
29.00 33.00 2.50 G G 029025
29.00 34.00 3.00 G G 029030
29.00 35.00 3.50 G G G G 029035
29.50 32.00 1.60 G G 029516
29.74 35.64 2.95 G G V9 916
30.00 32.40 1.50 G G 030015
30.00 33.00 2.00 G G G 030020
30.00 34.00 2.40 G G G 030024
30.00 34.00 2.50 G G G 030025
30.00 35.00 3.10 G G G G G 030031
30.00 36.00 3.50 G G G G 030035
30.00 37.00 4.00 G G 030040
30.00 39.00 5.00 G 030050
30.15 33.32 1.78 1/16 G G G G G G G G 025
30.15 34.93 2.62 3/32 G G G G G G G G 123
G G G G G G G
Rings & Washers

30.15 36.50 3.53 1/8 217

Ancillary

30.15 39.67 5.33 3/16 G G G G G G 321

31.00 33.40 1.50 G 031015
Metric sizes denoted by yellow shading

05/06 19/11
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
31.00 34.00 2.00 G 031020
31.00 35.00 2.50 G 031025
31.00 36.00 3.00 G G 031030
31.00 37.00 3.50 G G G G 031035
31.75 34.93 1.78 1/16 G G G G G G G G 026
31.75 36.50 2.62 3/32 G G G G G G G G 124
31.75 38.10 3.53 1/8 G G G G G G G G 218
31.75 41.28 5.33 3/16 G G G G G G 322
31.75 44.45 6.99 1/4 G 400
32.00 35.00 2.00 G G G 032020
32.00 36.00 2.40 G G 032024
32.00 36.00 2.50 G G 032025
32.00 37.00 3.00 G G 032030
32.00 38.00 3.50 G G G G 032035
32.00 39.00 4.00 G G 032040
32.50 35.00 1.60 G 032516
33.00 36.00 2.00 G G 033020
33.00 37.00 2.50 G G G 033025
33.00 38.00 3.00 G G G G 033030
33.00 40.00 4.00 G 033040
33.32 36.50 1.78 1/16 G G G G G G 027
33.32 38.10 2.62 3/32 G G G G G G G 125
33.32 39.67 3.53 1/8 G G G G G G G G 219
33.32 42.85 5.33 3/16 G G G G G 323
34.00 37.00 2.00 G G 034020
34.00 38.00 2.50 G G 034025
34.00 39.00 3.00 G G 034030
34.00 40.00 3.50 G G G G 034035
34.00 41.00 4.00 G 034040
34.00 43.00 5.00 G 034050
34.42 40.31 2.95 G G V9 918
34.93 38.10 1.78 1/16 G G G G G G G 028
34.93 39.67 2.62 3/32 G G G G G G G G 126
34.93 41.28 3.53 1/8 G G G G G G G G 220
34.93 44.45 5.33 3/16 G G G G G 324
35.00 37.40 1.50 G G 035015
35.00 38.00 2.00 G G 035020
Metric sizes denoted by yellow shading

19/12 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
35.00 39.00 2.40 G 035024
35.00 39.00 2.50 G G 035025
35.00 40.00 3.10 G G G G G 035031
35.00 41.00 3.50 G G G G 035035
35.00 42.00 4.00 G G 035040
35.00 44.00 5.00 G 035050
35.00 45.00 5.70 G 035057
35.50 38.00 1.60 G 035516
36.00 39.00 2.00 G G 036020
36.00 40.00 2.50 G G 036025
36.00 41.00 3.00 G G 036030
36.00 42.00 3.50 G G G G 036035
36.00 43.00 4.00 G 036040
36.50 41.28 2.62 3/32 G G G G G G G G 127
36.50 42.85 3.53 1/8 G G G G G G G 221
37.00 40.00 2.00 G 037020
37.00 41.00 2.50 G G 037025
37.00 42.00 3.00 G G G 037030
37.00 52.00 8.40 G 037084
37.47 43.46 3.00 G G V9 920
37.50 40.00 1.60 G G 037516
38.00 41.00 2.00 G G 038020
38.00 42.00 2.40 G 038024
38.00 42.00 2.50 G G G 038025
38.00 43.00 3.00 G G G G 038030
38.00 44.00 3.50 G G G G 038035
38.00 45.00 4.00 G G 038040
38.10 41.28 1.78 1/16 G G G G G G 029
38.10 42.85 2.62 3/32 G G G G G G G 128
38.10 44.45 3.53 1/8 G G G G G G G G 222
38.10 47.63 5.33 3/16 G G G G G G G 325
38.10 50.80 6.99 1/4 G G 401
39.00 42.00 2.00 G G 039020
39.00 43.00 2.50 G G 039025
G G
Rings & Washers

39.00 44.00 3.00 039030

Ancillary

39.00 45.00 3.50 G G G G 039035

39.67 44.45 2.62 3/32 G G G G G G G G 129
Metric sizes denoted by yellow shading

05/06 19/13
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
40.00 42.40 1.50 G G 040015
40.00 43.00 2.00 G G 040020
40.00 44.00 2.40 G G 040024
40.00 44.00 2.50 G G 040025
40.00 45.00 3.10 G G G G G 040031
40.00 46.00 3.50 G G G 040035
40.00 47.00 4.00 G G 040040
40.00 48.40 5.00 G G 040050
40.00 50.00 5.70 G G 040057
40.00 50.00 6.00 G 040060
41.00 44.00 2.00 G 041020
41.00 45.00 2.50 G 041025
41.00 46.00 3.00 G 041030
41.00 47.00 3.50 G G G G 041035
41.28 44.45 1.78 1/16 G G G G G G 030
41.28 46.02 2.62 3/32 G G G G G G G G 130
41.28 47.63 3.53 1/8 G G G G G G G G 223
41.28 50.80 5.33 3/16 G G G G G G G G 326
41.28 53.98 6.99 1/4 G 402
42.00 44.40 1.50 G 042015
42.00 45.00 2.00 G G 042020
42.00 46.00 2.40 G 042024
42.00 46.00 2.50 G G 042025
42.00 47.00 3.10 G G G 042031
42.00 48.00 3.50 G G G G 042035
42.00 49.00 4.00 G G 042040
42.00 51.00 5.00 G G 042050
42.85 47.63 2.62 3/32 G G G G G G G G 131
43.00 46.00 2.00 G G 043020
43.00 47.00 2.50 G G 043025
43.00 48.00 3.00 G G G 043030
43.69 49.68 3.00 G G V9 924
44.00 47.00 2.00 G 044020
44.00 48.00 2.50 G G 044025
44.00 49.00 3.00 G G G 044030
44.00 50.00 3.50 G G G G 044035
44.00 51.00 4.00 G G 044040
Metric sizes denoted by yellow shading

19/14 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
44.45 47.63 1.78 1/16 G G G G G 031
44.45 49.20 2.62 3/32 G G G G G G G G 132
44.45 50.80 3.53 1/8 G G G G G G G G 224
44.45 53.98 5.33 3/16 G G G G G G G G 327
44.45 57.15 6.99 1/4 G 403
45.00 47.40 1.50 G 045015
45.00 48.00 2.00 G G 045020
45.00 49.00 2.40 G G 045024
45.00 49.00 2.50 G G 045025
45.00 50.00 3.10 G G G G G 045031
45.00 51.00 3.50 G G G G 045035
45.00 52.00 4.00 G 045040
45.00 54.00 5.00 G G 045050
45.00 55.00 5.70 G 045057
45.00 55.00 6.00 G 045060
46.00 49.00 2.00 G G 046020
46.00 50.00 2.50 G 046025
46.00 51.00 3.00 G G 046030
46.00 52.00 3.50 G G G G 046035
46.00 53.00 4.00 G G 046040
46.00 56.00 5.70 G 046057
46.02 50.80 2.62 3/32 G G G G G G G 133
47.00 50.00 2.00 G G 047020
47.00 51.00 2.50 G 047025
47.00 52.00 3.00 G G 047030
47.63 50.80 1.78 1/16 G G G G G G 032
47.63 52.37 2.62 3/32 G G G G G G G 134
47.63 53.98 3.53 1/8 G G G G G G G G 225
47.63 57.15 5.33 3/16 G G G G G G G G 328
47.63 60.33 6.99 1/4 G 404
48.00 51.00 2.00 G G 048020
48.00 52.00 2.40 G 048024
48.00 52.00 2.50 G 048025
48.00 53.00 3.00 G G 048030
G G G G
Rings & Washers

48.00 54.00 3.50 048035

Ancillary

48.00 55.00 4.00 G G 048040

48.00 57.00 5.00 G 048050
Metric sizes denoted by yellow shading

05/06 19/15
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
48.00 58.00 5.70 G 048057
48.50 53.50 3.00 G 048530
49.00 52.00 2.00 G 049020
49.00 53.00 2.50 G G 049025
49.00 54.00 3.00 G G 049030
49.00 55.00 3.50 G G G G 049035
49.20 55.55 1.63 1/8 G 225A
49.20 53.98 2.62 3/32 G G G G G G G 135
50.00 53.00 2.00 G G 050020
50.00 54.00 2.40 G 050024
50.00 54.00 2.50 G G 050025
50.00 55.00 3.10 G G G G G 050031
50.00 56.00 3.50 G G G G 050035
50.00 57.00 4.00 G G 050040
50.00 59.00 5.00 G G 050050
50.00 60.00 5.70 G G G G G 050057
50.00 60.00 6.00 G 050060
50.80 53.98 1.78 1/16 G G G G G 033
50.80 55.55 2.62 3/32 G G G G G G G 136
50.80 57.15 3.53 1/8 G G G G G G G G 226
50.80 60.33 5.33 3/16 G G G G G G G G 329
50.80 63.50 6.99 1/4 G 405
51.00 55.00 2.50 G 051025
52.00 55.00 2.00 G G 052020
52.00 56.00 2.40 G 052024
52.00 56.00 2.50 G 052025
52.00 57.00 3.00 G 052030
52.00 59.00 4.00 G G 052040
52.00 62.00 5.70 G G 052057
52.37 57.15 2.62 3/32 G G G G G G 137
53.00 57.00 2.50 G 053025
53.00 63.00 5.70 G G G G G 053057
53.09 59.08 3.00 G G V9 928
53.98 57.15 1.78 1/16 G G G G G 034
53.98 58.72 2.62 3/32 G G G G G G G 138
53.98 60.33 3.53 1/8 G G G G G G G G 227
53.98 63.50 5.33 3/16 G G G G G G G G 330
Metric sizes denoted by yellow shading

19/16 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
53.98 66.68 6.99 1/4 G 406
54.00 57.00 2.00 G 054020
54.00 58.00 2.50 G 054025
54.00 61.00 4.00 G 054040
55.00 58.00 2.00 G 055020
55.00 59.00 2.40 G 055024
55.00 59.00 2.50 G G 055025
55.00 60.00 3.10 G G G G G 055031
55.00 62.00 4.00 G G 055040
55.00 64.00 5.00 G G 055050
55.00 65.00 5.70 G G G G G 055057
55.55 60.33 2.62 3/32 G G G G G G G 139
56.00 59.00 2.00 G 056020
56.00 60.00 2.50 G 056025
56.00 61.00 3.00 G 056030
56.00 63.00 4.00 G 056040
56.00 66.00 5.70 G G G G 056057
57.00 60.00 2.00 G 057020
57.00 61.00 2.50 G 057025
57.00 62.00 3.00 G G G 057030
57.15 60.33 1.78 1/16 G G G G G G 035
57.15 61.90 2.62 3/32 G G G G G G G 140
57.15 63.50 3.53 1/8 G G G G G G G G 228
57.15 66.68 5.33 3/16 G G G G G G G G 331
57.15 69.85 6.99 1/4 G 407
58.00 61.00 2.00 G 058020
58.00 62.00 2.40 G 058024
58.00 62.00 2.50 G 058025
58.00 63.00 3.10 G G G G 058031
58.00 65.00 4.00 G G 058040
58.00 68.00 5.70 G G G 058057
58.00 68.00 6.00 G 058060
58.72 63.50 2.62 3/32 G G G G G G 141
59.00 63.00 2.50 G 059025
G G
Rings & Washers

59.00 64.00 3.00 059030

Ancillary

59.36 65.35 3.00 G G V9 932

60.00 63.00 2.00 G 060020
Metric sizes denoted by yellow shading

05/06 19/17
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
60.00 64.00 2.40 G G 060024
60.00 64.00 2.50 G G 060025
60.00 65.00 3.10 G G G G G 060031
60.00 67.00 4.00 G G 060040
60.00 69.00 5.00 G G 060050
60.00 70.00 5.70 G G G G G 060057
60.00 78.00 9.00 G 060090
60.33 63.50 1.78 1/16 G G G G G G 036
60.33 65.07 2.62 3/32 G G G G G G 142
60.33 66.68 3.53 1/8 G G G G G G G G 229
60.33 69.85 5.33 3/16 G G G G G G G G 332
60.33 73.03 6.99 1/4 G 408
61.00 65.00 2.50 G 061025
61.90 66.68 2.62 3/32 G G G G G G G 143
62.00 64.40 1.50 G 062015
62.00 66.00 2.40 G 062024
62.00 66.00 2.50 G G 062025
62.00 67.00 3.00 G 062030
62.00 69.00 4.00 G G 062040
62.00 72.00 5.70 G G G 062057
63.00 66.00 2.00 G 063020
63.00 67.00 2.50 G G 063025
63.00 68.00 3.00 G G G G 063030
63.00 73.00 5.70 G G G 063057
63.50 66.68 1.78 1/16 G G G G G G 037
63.50 68.25 2.62 3/32 G G G G G G 144
63.50 69.85 3.53 1/8 G G G G G G G G 230
63.50 73.03 5.33 3/16 G G G G G G G G 333
63.50 76.20 6.99 1/4 G 409
64.00 69.00 3.00 G 064030
64.00 71.00 4.00 G G G 064040
65.00 68.00 2.00 G 065020
65.00 69.00 2.40 G 065024
65.00 69.00 2.50 G G 065025
65.00 70.00 3.10 G G G G G 065031
65.00 72.00 4.00 G 065040
65.00 74.00 5.00 G G 065050
Metric sizes denoted by yellow shading

19/18 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
65.00 75.00 5.70 G G G G G 065057
65.07 69.85 2.62 3/32 G G G G G G 145
66.00 69.00 2.00 G 066020
66.00 73.00 4.00 G 066040
66.68 69.85 1.78 1/16 G G G G G 038
66.68 71.42 2.62 3/32 G G G G G G 146
66.68 73.03 3.53 1/8 G G G G G G G G 231
66.68 76.20 5.33 3/16 G G G G G G G G G 334
66.68 79.38 6.99 1/4 G 410
67.00 71.00 2.50 G 067025
67.00 77.00 5.70 G G G 067057
68.00 72.00 2.40 G 068024
68.00 72.00 2.50 G 068025
68.00 75.00 4.00 G G 068040
68.25 73.03 2.62 3/32 G G G G G G 147
69.00 73.00 2.50 G 069025
69.00 74.00 3.00 G 069030
69.85 73.03 1.78 1/16 G G G G G 039
69.85 74.60 2.62 3/32 G G G G G G 148
69.85 76.20 3.53 1/8 G G G G G G G G G 232
69.85 79.38 5.33 3/16 G G G G G G G G 335
69.85 82.55 6.99 1/4 G 411
70.00 73.00 2.00 G 070020
70.00 74.00 2.40 G 070024
70.00 74.00 2.50 G G 070025
70.00 75.00 3.10 G G G G G 070031
70.00 77.00 4.00 G G 070040
70.00 79.00 5.00 G G 070050
70.00 80.00 5.70 G G G G G 070057
70.00 80.00 6.00 G 070060
71.00 75.00 2.50 G 071025
71.00 81.00 5.70 G G G 071057
71.42 76.20 2.62 3/32 G G G G G G 149
72.00 76.00 2.50 G 072025
G G
Rings & Washers

72.00 77.00 3.00 072030

Ancillary

72.00 79.00 4.00 G G 072040

72.50 77.50 3.00 G 072530
Metric sizes denoted by yellow shading

05/06 19/19
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
72.50 82.50 5.70 G 072557
73.00 77.00 2.50 G 073025
73.00 83.00 5.70 G 073057
73.03 76.20 1.78 1/16 G G G G G 040
73.03 77.77 2.62 3/32 G G G G G 150
73.03 79.38 3.53 1/8 G G G G G G G G 233
73.03 82.55 5.33 3/16 G G G G G G G G 336
73.03 85.73 6.99 1/4 G G 412
74.00 77.00 2.00 G 074020
74.00 78.00 2.50 G 074025
74.00 79.00 3.00 G G G 074030
74.00 81.00 4.00 G 074040
75.00 79.00 2.50 G G 075025
75.00 80.00 3.10 G G G G G 075031
75.00 81.00 3.50 G 075035
75.00 82.00 4.00 G G 075040
75.00 84.00 5.00 G G 075050
75.00 85.00 5.70 G G G G G 075057
76.00 79.00 2.00 G 076020
76.00 83.00 4.00 G 076040
76.20 79.38 1.78 1/16 G G G G G 041
76.20 80.95 2.62 3/32 G G G G G G 151
76.20 82.55 3.53 1/8 G G G G G G G G 234
76.20 85.73 5.33 3/16 G G G G G G G G 337
76.20 88.90 6.99 1/4 G 413
78.00 83.00 3.00 G G 078030
78.00 85.00 4.00 G G G 078040
78.00 86.00 5.00 G 078050
78.00 88.00 5.70 G G 078057
79.00 84.00 3.00 G 079030
79.38 85.73 3.53 1/8 G G G G G G G G 235
79.38 88.90 5.33 3/16 G G G G G G G G 338
79.38 92.08 6.99 1/4 G 414
80.00 83.00 2.00 G 080020
80.00 84.00 2.50 G 080025
80.00 85.00 3.10 G G G G G 080031
80.00 87.00 4.00 G G G 080040
Metric sizes denoted by yellow shading

19/20 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
80.00 89.00 5.00 G G 080050
80.00 90.00 5.70 G G G G G 080057
82.00 85.00 2.00 G 082020
82.00 89.00 4.00 G G 082040
82.55 85.73 1.78 1/16 G G G G G 042
82.55 87.30 2.62 3/32 G G G G G G 152
82.55 88.90 3.53 1/8 G G G G G G G G 236
82.55 92.08 5.33 3/16 G G G G G G G G 339
82.55 95.25 6.99 1/4 G 415
84.00 89.00 3.00 G 084030
84.00 91.00 4.00 G G 084040
85.00 88.00 2.00 G G 085020
85.00 89.00 2.50 G 085025
85.00 90.00 3.10 G G G G G 085031
85.00 92.00 4.00 G G 085040
85.00 94.00 5.00 G G 085050
85.00 95.00 5.70 G G G G G 085057
85.73 92.08 3.53 1/8 G G G G G G G G 237
85.73 95.25 5.33 3/16 G G G G G G G G 340
85.73 98.43 6.99 1/4 G 416
86.00 89.00 2.00 G 086020
86.00 93.00 4.00 G 086040
87.00 92.00 3.00 G 087030
87.00 94.00 4.00 G 087040
88.00 95.00 4.00 G 088040
88.00 98.00 6.00 G 088060
88.90 92.08 1.78 1/16 G G G G G 043
88.90 93.65 2.62 3/32 G G G G G G 153
88.90 95.25 3.53 1/8 G G G G G G G G 238
88.90 98.43 5.33 3/16 G G G G G G G 341
88.90 101.60 6.99 1/4 G 417
90.00 93.00 2.00 G 090020
90.00 94.00 2.50 G 090025
90.00 95.00 3.10 G G G G G 090031
G G
Rings & Washers

90.00 97.00 4.00 090040

Ancillary

90.00 99.00 5.00 G G 090050

90.00 100.00 5.70 G G G G G 090057
Metric sizes denoted by yellow shading

05/06 19/21
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
91.00 95.00 2.50 G 091025
92.00 97.00 3.00 G 092030
92.00 99.00 4.00 G G 092040
92.08 98.43 3.53 1/8 G G G G G G G 239
92.08 101.60 5.33 3/16 G G G G G G G G 342
92.08 104.78 6.99 1/4 G 418
94.00 97.00 2.00 G 094020
94.00 99.00 3.00 G 094030
94.00 101.00 4.00 G 094040
94.00 103.00 5.00 G 094050
95.00 99.00 2.50 G 095025
95.00 100.00 3.10 G G G G G 095031
95.00 102.00 4.00 G 095040
95.00 104.00 5.00 G G 095050
95.00 105.00 5.70 G G G G G 095057
95.25 98.43 1.78 1/16 G G G G G 044
95.25 100.00 2.62 3/32 G G G G G 154
95.25 101.60 3.53 1/8 G G G G G G G G 240
95.25 104.78 5.33 3/16 G G G G G G G 343
95.25 107.95 6.99 1/4 G 419
96.00 99.00 2.00 G 096020
96.00 103.00 4.00 G 096040
98.00 105.00 4.00 G G 098040
98.43 104.78 3.53 1/8 G G G G G G G G 241
98.43 107.95 5.33 3/16 G G G G G G G G 344
98.43 111.13 6.99 1/4 G 420
99.00 103.00 2.50 G 099025
100.00 103.00 2.00 G 100020
100.00 104.00 2.50 G 100025
100.00 105.00 3.10 G G G G G 100031
100.00 107.00 4.00 G G 100040
100.00 109.00 5.00 G G G 100050
100.00 110.00 5.70 G G G G G 100057
100.00 110.00 6.00 G 100060
101.60 104.78 1.78 1/16 G G G G 045
101.60 106.35 2.62 3/32 G G G G 155
101.60 107.95 3.53 1/8 G G G G G G G G 242
Metric sizes denoted by yellow shading

19/22 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
101.60 111.13 5.33 3/16 G G G G G G G G 345
101.60 114.30 6.99 1/4 G 421
102.00 109.00 4.00 G G 102040
102.00 112.00 5.70 G 102057
104.00 111.00 4.00 G 104040
104.78 111.13 3.53 1/8 G G G G G G G 243
104.78 114.30 5.33 3/16 G G G G G G G G 346
104.78 117.48 6.99 1/4 G 422
105.00 110.00 3.10 G G G G G 105031
105.00 112.00 4.00 G 105040
105.00 114.00 5.00 G G 105050
105.00 115.00 5.70 G G G G G 105057
106.00 113.00 4.00 G 106040
107.95 111.13 1.78 1/16 G G G G G 046
107.95 112.70 2.62 3/32 G G G G G 156
107.95 114.30 3.53 1/8 G G G G G G G G 244
107.95 117.48 5.33 3/16 G G G G G G G G 347
107.95 120.65 6.99 1/4 G 423
108.00 115.00 4.00 G 108040
110.00 113.00 2.00 G 110020
110.00 114.00 2.50 G 110025
110.00 115.00 3.10 G G G G G 110031
110.00 117.00 4.00 G G 110040
110.00 119.00 5.00 G G 110050
110.00 120.00 5.70 G G G G G 110057
111.13 117.48 3.53 1/8 G G G G G G G G 245
111.13 120.65 5.33 3/16 G G G G G G G G 348
111.13 123.83 6.99 1/4 G 424
112.00 117.00 3.00 G G 112030
112.00 119.00 4.00 G 112040
112.00 122.00 5.70 G 112057
113.00 118.00 3.00 G G 113030
113.00 120.00 4.00 G 113040
114.00 121.00 4.00 G 114040
G G G G
Rings & Washers

114.30 117.48 1.78 1/16 047

Ancillary

114.30 119.05 2.62 3/32 G G G G G G 157

114.30 120.65 3.53 1/8 G G G G G G G 246
Metric sizes denoted by yellow shading

05/06 19/23
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
114.30 123.83 5.33 3/16 G G G G G G G G 349
114.30 127.00 6.99 1/4 G G G G G G G G 425
115.00 120.00 3.10 G G G G G 115031
115.00 122.00 4.00 G 115040
115.00 125.00 5.70 G G G G G 115057
115.00 125.00 6.00 G 115060
116.00 123.00 4.00 G G 116040
117.00 124.00 4.00 G G 117040
117.48 123.83 3.53 1/8 G G G G G G G 247
117.48 127.00 5.33 3/16 G G G G G G G 350
117.48 130.18 6.99 1/4 G G G G G G G G 426
118.00 125.00 4.00 G G 118040
119.00 126.00 4.00 G 119040
120.00 123.00 2.00 G 120020
120.00 125.00 3.10 G G G G G 120031
120.00 127.00 4.00 G G 120040
120.00 129.00 5.00 G G G 120050
120.00 130.00 5.70 G G G G G 120057
120.65 123.83 1.78 1/16 G G G G G 048
120.65 125.40 2.62 3/32 G G G G G 158
120.65 127.00 3.53 1/8 G G G G G G G G 248
120.65 130.18 5.33 3/16 G G G G G G G 351
120.65 133.35 6.99 1/4 G G G G G G G 427
121.00 128.00 4.00 G 121040
122.00 129.00 4.00 G G 122040
123.83 130.18 3.53 1/8 G G G G G G G 249
123.83 133.35 5.33 3/16 G G G G G 352
123.83 136.53 6.99 1/4 G G G G G G G 428
124.00 129.00 3.00 G 124030
124.00 131.00 4.00 G 124040
125.00 128.00 2.00 G 125020
125.00 130.00 3.10 G G G G G 125031
125.00 132.00 4.00 G G 125040
125.00 134.00 5.00 G G 125050
125.00 135.00 5.70 G G G G G 125057
125.00 135.00 6.00 G 125060
126.00 133.00 4.00 G 126040
Metric sizes denoted by yellow shading

19/24 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
127.00 130.18 1.78 1/16 G G G 049
127.00 131.75 2.62 3/32 G G G G 159
127.00 133.35 3.53 1/8 G G G G G G G G 250
127.00 134.00 4.00 G 127040
127.00 136.53 5.33 3/16 G G G G G 353
127.00 139.70 6.99 1/4 G G G G G G G G 429
130.00 134.00 2.50 G 130025
130.00 135.00 3.10 G G G G G 130031
130.00 137.00 4.00 G G 130040
130.00 139.00 5.00 G G 130050
130.00 140.00 5.70 G G G G G 130057
130.00 140.00 6.00 G G 130060
130.18 136.53 3.53 1/8 G G G G G G G 251
130.18 139.70 5.33 3/16 G G G G G G 354
130.18 142.88 6.99 1/4 G G G G G G 430
132.00 137.00 3.00 G 132030
132.00 139.00 4.00 G 132040
132.00 142.00 5.70 G 132057
133.35 136.53 1.78 1/16 G G G G 050
133.35 138.10 2.62 3/32 G G G G G 160
133.35 139.70 3.53 1/8 G G G G G G G G 252
133.35 142.88 5.33 3/16 G G G G G G 355
133.35 146.05 6.99 1/4 G G G G G G G G 431
134.00 141.00 4.00 G 134040
135.00 139.00 2.50 G 135025
135.00 140.00 3.10 G G G G G 135031
135.00 142.00 4.00 G 135040
135.00 144.00 5.00 G G 135050
135.00 145.00 5.70 G G G G G 135057
135.00 145.00 6.00 G 135060
136.00 143.00 4.00 G 136040
136.53 142.88 3.53 1/8 G G G G G G G 253
136.53 146.05 5.33 3/16 G G G G G G 356
136.53 149.23 6.99 1/4 G G G G G G G 432
G
Rings & Washers

138.00 145.00 4.00 138040

Ancillary

139.00 148.00 5.00 G 139050

139.70 144.45 2.62 3/32 G G G G G G 161
Metric sizes denoted by yellow shading

05/06 19/25
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
139.70 146.05 3.53 1/8 G G G G G G G G 254
139.70 149.23 5.33 3/16 G G G G G G G 357
139.70 152.40 6.99 1/4 G G G G G G G G 433
140.00 144.00 2.50 G 140025
140.00 145.00 3.10 G G G G G 140031
140.00 147.00 4.00 G G 140040
140.00 149.00 5.00 G G 140050
140.00 150.00 5.70 G G G G G 140057
142.00 149.00 4.00 G 142040
142.00 152.00 6.00 G 142060
142.88 149.23 3.53 1/8 G G G G G G 255
142.88 152.40 5.33 3/16 G G G G G G 358
142.88 155.58 6.99 1/4 G G G G G G 434
144.00 151.00 4.00 G 144040
145.00 150.00 3.10 G G G G G 145031
145.00 152.00 4.00 G G 145040
145.00 154.00 5.00 G G 145050
145.00 155.00 5.70 G G G G G 145057
145.00 160.00 8.40 G 145084
146.00 153.00 4.00 G 146040
146.05 150.80 2.62 3/32 G G G G G 162
146.05 152.40 3.53 1/8 G G G G G G G G 256
146.05 155.58 5.33 3/16 G G G G G 359
146.05 158.75 6.99 1/4 G G G G G G G 435
147.00 152.00 3.00 G 147030
148.00 153.00 3.00 G 148030
148.00 155.00 4.00 G 148040
149.23 155.58 3.53 1/8 G G G G G G 257
149.23 158.75 5.33 3/16 G G G G G 360
149.23 161.93 6.99 1/4 G G G G G G 436
150.00 154.00 2.50 G 150025
150.00 155.00 3.00 G G 150030
150.00 157.00 4.00 G G 150040
150.00 159.00 5.00 G G G 150050
150.00 160.00 5.70 G G G G G 150057
150.00 165.00 8.40 G G G 150084
152.40 157.15 2.62 3/32 G G G G G 163
Metric sizes denoted by yellow shading

19/26 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
152.40 158.75 3.53 1/8 G G G G G G G 258
152.40 161.93 5.33 3/16 G G G G G 361
152.40 165.10 6.99 1/4 G G G G G G G 437
155.00 160.00 3.00 G G G 155030
155.00 164.00 5.00 G G 155050
155.00 165.00 5.70 G G G G G 155057
155.00 170.00 8.40 G G G 155084
158.75 163.50 2.62 3/32 G G G G G 164
158.75 165.10 3.53 1/8 G G G G G 259
158.75 168.28 5.33 3/16 G G G G G G G G 362
158.75 171.45 6.99 1/4 G G G G G G G 438
160.00 165.00 3.00 G G G 160030
160.00 167.00 4.00 G G 160040
160.00 169.00 5.00 G G G 160050
160.00 170.00 5.70 G G G G G 160057
160.00 175.00 8.40 G G G G 160084
164.00 171.00 4.00 G 164040
165.00 170.00 3.00 G G 165030
165.00 172.00 4.00 G 165040
165.00 174.00 5.00 G G 165050
165.00 175.00 5.70 G G G G G 165057
165.00 180.00 8.40 G G G 165084
165.10 169.85 2.62 3/32 G G G G 165
165.10 171.45 3.53 1/8 G G G G G 260
165.10 174.63 5.33 3/16 G G G G G G G G 363
165.10 177.80 6.99 1/4 G G G G G G G 439
170.00 174.00 2.40 G 170024
170.00 175.00 3.00 G G 170030
170.00 177.00 4.00 G 170040
170.00 179.00 5.00 G G 170050
170.00 180.00 5.70 G G G G G 170057
170.00 185.00 8.40 G G G 170084
171.45 176.20 2.62 3/32 G G G G G 166
171.45 177.80 3.53 1/8 G G G G G G 261
G G G G G
Rings & Washers

171.45 180.98 5.33 3/16 364

Ancillary

171.45 184.15 6.99 1/4 G G G G G G 440

172.00 179.00 4.00 G 172040
Metric sizes denoted by yellow shading

05/06 19/27
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
175.00 180.00 3.00 G G 175030
175.00 184.00 5.00 G G 175050
175.00 185.00 5.70 G G G G G 175057
175.00 190.00 8.40 G G G 175084
177.80 182.55 2.62 3/32 G G G 167
177.80 184.15 3.53 1/8 G G G G G G G 262
177.80 187.33 5.33 3/16 G G G G G G 365
177.80 190.50 6.99 1/4 G G G G G G 441
180.00 185.00 3.00 G G 180030
180.00 187.00 4.00 G 180040
180.00 189.00 5.00 G G 180050
180.00 190.00 5.70 G G G G G 180057
180.00 195.00 8.40 G G G 180084
183.00 186.00 2.00 G 183020
184.15 188.90 2.62 3/32 G G G G 168
184.15 190.50 3.53 1/8 G G G G G 263
184.15 193.68 5.33 3/16 G G G G G 366
184.15 196.85 6.99 1/4 G G G G G G G 442
185.00 190.00 3.00 G G 185030
185.00 194.00 5.00 G G 185050
185.00 195.00 5.70 G G G G G 185057
185.00 200.00 8.40 G G G 185084
186.00 193.00 4.00 G 186040
190.00 195.00 3.00 G G 190030
190.00 197.00 4.00 G 190040
190.00 199.00 5.00 G G 190050
190.00 200.00 5.70 G G G G G 190057
190.00 205.00 8.40 G G G 190084
190.50 195.25 2.62 3/32 G G G 169
190.50 196.85 3.53 1/8 G G G G G 264
190.50 200.03 5.33 3/16 G G G G G G G 367
190.50 203.20 6.99 1/4 G G G G G G G 443
192.00 199.00 4.00 G G 192040
195.00 200.00 3.00 G G 195030
195.00 204.00 5.00 G 195050
195.00 205.00 5.70 G G G G G 195057
195.00 210.00 8.40 G G G 195084
Metric sizes denoted by yellow shading

19/28 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
196.85 201.60 2.62 3/32 G G G G 170
196.85 203.20 3.53 1/8 G G G G G 265
196.85 206.38 5.33 3/16 G G G G G 368
196.85 209.55 6.99 1/4 G G G G G G G G 444
200.00 205.00 3.00 G G 200030
200.00 207.00 4.00 G 200040
200.00 209.00 5.00 G G 200050
200.00 210.00 5.70 G G G G G 200057
200.00 215.00 8.40 G G G 200084
203.20 207.95 2.62 3/32 G G G 171
203.20 209.55 3.53 1/8 G G G G G G 266
203.20 212.73 5.33 3/16 G G G G G 369
203.20 215.90 6.99 1/4 G G G G G G G 445
205.00 210.00 3.00 G 205030
205.00 214.00 5.00 G 205050
205.00 215.00 5.70 G 205057
205.00 220.00 8.40 G G G 205084
209.55 214.30 2.62 3/32 G G 172
209.55 215.90 3.53 1/8 G G G G 267
209.55 219.08 5.33 3/16 G G G G G G G 370
209.55 222.25 6.99 1/4 G 445A
210.00 215.00 3.00 G G 210030
210.00 219.00 5.00 G 210050
210.00 220.00 5.70 G G G G G 210057
210.00 225.00 8.40 G G G 210084
215.00 222.00 4.00 G 215040
215.00 224.00 5.00 G 215050
215.00 225.00 5.70 G 215057
215.00 230.00 8.40 G G 215084
215.90 220.65 2.62 3/32 G G 173
215.90 222.25 3.53 1/8 G G G G G 268
215.90 225.43 5.33 3/16 G G G G G 371
215.90 228.60 6.99 1/4 G G G G G G 446
220.00 225.00 3.00 G G 220030
G
Rings & Washers

220.00 227.00 4.00 220040

Ancillary

220.00 229.00 5.00 G 220050

220.00 230.00 5.70 G G G G G 220057
Metric sizes denoted by yellow shading

05/06 19/29
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
220.00 235.00 8.40 G G G 220084
222.25 227.00 2.62 3/32 G G G 174
222.25 228.60 3.53 1/8 G G G G 269
222.25 231.78 5.33 3/16 G G G G G 372
225.00 240.00 8.40 G G 225084
228.60 233.35 2.62 3/32 G G 175
228.60 234.95 3.53 1/8 G G G G G 270
228.60 238.13 5.33 3/16 G G G 373
228.60 241.30 6.99 1/4 G G G G G G 447
230.00 235.00 3.00 G G 230030
230.00 239.00 5.00 G G 230050
230.00 240.00 5.70 G G G G G 230057
230.00 245.00 8.40 G G G 230084
234.95 239.70 2.62 3/32 G G G 176
234.95 241.30 3.53 1/8 G G G G G 271
234.95 244.48 5.33 3/16 G G G G 374
234.95 247.65 6.99 1/4 G 446A
235.00 250.00 8.40 G G G 235084
240.00 245.00 3.00 G G 240030
240.00 250.00 5.70 G G G G G 240057
240.00 255.00 8.40 G G G 240084
241.30 246.05 2.62 3/32 G G 177
241.30 247.65 3.53 1/8 G G G G G 272
241.30 250.83 5.33 3/16 G G G G G 375
241.30 254.00 6.99 1/4 G G G G G G 448
245.00 252.00 4.00 G 245040
245.00 260.00 8.40 G G 245084
247.65 252.40 2.62 3/32 G G 178
247.65 254.00 3.53 1/8 G G G G 273
247.65 257.18 5.33 3/16 G G G G G 376
250.00 255.00 3.00 G G 250030
250.00 257.00 4.00 G 250040
250.00 259.00 5.00 G 250050
250.00 260.00 5.70 G G G G G 250057
250.00 265.00 8.40 G G G 250084
254.00 260.35 3.53 1/8 G G G G 274
254.00 263.53 5.33 3/16 G G G G 377
Metric sizes denoted by yellow shading

19/30 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
254.00 266.70 6.99 1/4 G G G G G G 449
255.00 270.00 8.40 G G G 255084
260.00 269.00 5.00 G 260050
260.00 270.00 5.70 G G G G 260057
265.00 280.00 8.40 G G G 265084
266.70 273.05 3.53 1/8 G G G G G 275
266.70 276.23 5.33 3/16 G G G G 378
266.70 279.40 6.99 1/4 G G G G G G 450
270.00 277.00 4.00 G 270040
270.00 280.00 5.70 G G G G G 270057
273.05 285.75 6.99 1/4 G 450A
275.00 290.00 8.40 G G 275084
279.40 285.75 3.53 1/8 G G G G G 276
279.40 288.93 5.33 3/16 G G G G G 379
279.40 292.10 6.99 1/4 G G G G G G 451
280.00 285.00 3.00 G 280030
280.00 287.00 4.00 G 280040
280.00 289.00 5.00 G 280050
280.00 290.00 5.70 G G G G 280057
280.00 295.00 8.40 G G 280084
285.00 300.00 8.40 G G G 285084
285.75 298.45 6.99 1/4 G 451A
290.00 300.00 5.70 G G G G 290057
290.00 305.00 8.40 G G G 290084
292.10 298.45 3.53 1/8 G G G G G 277
292.10 301.63 5.33 3/16 G G G G 380
292.10 304.80 6.99 1/4 G G G G G G 452
295.00 310.00 8.40 G G 295084
298.45 311.15 6.99 1/4 G 452A
300.00 310.00 5.70 G G G G 300057
304.80 311.15 3.53 1/8 G G G G G 278
304.80 314.33 5.33 3/16 G G G G 381
304.80 317.50 6.99 1/4 G G G G G G 453
310.00 319.00 5.00 G 310050
G G
Rings & Washers

310.00 320.00 5.70 310057

Ancillary

315.00 330.00 8.40 G G G 315084

317.50 330.20 6.99 1/4 G G G G G G 454
Metric sizes denoted by yellow shading

05/06 19/31
 O-rings

NBR70 o-ring NBR90 o-ring Urethane o-ring Viton o-ring

NR
S E A L S
Order code
imp. 2-(size)
met. 3-(size)
Order code
imp. 2-(size)-N9
met. 3-(size)-N9
Order code
imp. 2-(size)-P9
met. 3-(size)-P9
Order code
imp. 2-(size)-V7
met. 3-(size)-V7

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
320.00 330.00 5.70 G 320057
320.00 335.00 8.40 G 320084
330.00 340.00 5.70 G 330057
330.20 336.55 3.53 1/8 G G G G 279
330.20 339.73 5.33 3/16 G G G 382
330.20 342.90 6.99 1/4 G G G G G G 455
340.00 349.00 5.00 G 340050
340.00 350.00 5.70 G 340057
340.00 355.00 8.40 G G 340084
342.90 355.60 6.99 1/4 G G G G G 456
355.60 361.95 3.53 1/8 G G G G 280
355.60 365.13 5.33 3/16 G G G 383
355.60 368.30 6.99 1/4 G G G G G 457
360.00 367.00 4.00 G 360040
360.00 370.00 5.70 G 360057
361.00 368.00 4.00 G 361040
368.30 374.65 3.53 1/8 G 280A
368.30 381.00 6.99 1/4 G G G G G G 458
370.00 379.00 5.00 G 370050
375.00 390.00 8.40 G G 375084
380.00 390.00 5.70 G 380057
381.00 387.35 3.53 1/8 G G G G 281
381.00 390.53 5.33 3/16 G G 384
381.00 393.70 6.99 1/4 G G G G G 459
385.00 394.00 5.00 G 385050
385.00 400.00 8.40 G G 385084
393.70 406.40 6.99 1/4 G G G G G 460
400.00 410.00 5.70 G G 400057
406.40 412.75 3.53 1/8 G G 282
406.40 415.93 5.33 3/16 G G G 385
406.40 419.10 6.99 1/4 G G G 461
419.10 431.80 6.99 1/4 G G G G 462
420.00 430.00 5.70 G 420057
431.80 438.15 3.53 1/8 G G 283
431.80 441.33 5.33 3/16 G G G 386
431.80 444.50 6.99 1/4 G G G 463
435.00 444.00 5.00 G 435050
Metric sizes denoted by yellow shading

19/32 05/06
Quad ring Backup rings

NBR Quad ring Urethane Washer NBR Washer Hytrel Washer PTFE Washer

Order code Order code Order code Order code Order code
imp. 4-(size) imp. 8-(size)-P9 imp. 8-(size)-N9 imp. 8-(size)-H imp. 8-(size)-T
met. 9-(size)-P9 met. 9-(size)-H met. 9-(size)-T

Shaft Cylinder O-Ring Quad O-Rings Back Up Rings

C/S nom NBR70 NBR70 NBR90 Poly Viton NBR Poly Hytrel PTFE Size
440.00 447.00 4.00 G 440040
440.00 450.00 5.70 G 440057
444.50 457.20 6.99 1/4 G G G G G 464
450.00 457.00 4.00 G 450040
457.20 463.55 3.53 1/8 G G 284
457.20 466.73 5.33 3/16 G G G 387
457.20 469.90 6.99 1/4 G G G G 465
460.00 470.00 5.70 G 460057
469.90 482.60 6.99 1/4 G G G 466
480.00 490.00 5.70 G 480057
482.60 492.13 5.33 3/16 G 388
482.60 495.30 6.99 1/4 G G G 467
495.30 508.00 6.99 1/4 G G G 468
497.00 504.00 4.00 G 497040
500.00 510.00 5.70 G 500057
500.00 515.00 8.40 G 500084
508.00 517.53 5.33 3/16 G G G 389
508.00 520.70 6.99 1/4 G G G 469
533.40 542.93 5.33 3/16 G G G G 390
533.40 546.10 6.99 1/4 G G G G 470
558.80 568.33 5.33 3/16 G G G 391
558.80 571.50 6.99 1/4 G G G 471
584.20 593.73 5.33 3/16 G G G 392
584.20 596.90 6.99 1/4 G G G G 472
609.60 619.13 5.33 3/16 G G 393
609.60 622.30 6.99 1/4 G G 473
635.00 644.53 5.33 3/16 G 394
635.00 647.70 6.99 1/4 G G G G 474
660.40 669.93 5.33 3/16 G 395
660.40 673.10 6.99 1/4 G G 475
Metric sizes denoted by yellow shading
Rings & Washers
Ancillary

05/06 19/33
 Grab Kits
O-ring, Quad ring, Flange seal, Back Up
& Bonded washers

NR
S E A L S

Design
Ancillary

b Kits Full Range of Grab Box kits to suit the Hydraulic Industry.
Gra

Kit Types
O-ring Kit Definitions

Quad ring O-Ring Kits

NBR70 & 90 Shore A
Back up washers Viton, EDPM & other compounds
Boss Gasket NBR90 Shore A
Flange seals Splicing Kit

Bonded washers
Quad Ring Kits
Tools NBR70 Shore A

Back Up Washer Kits

NBR90 Shore A
Polyurethane
PTFE

Flange Seal Kits (SAE J518)

Polyurethane 92 Shore A – Type 61 & 62 flanges
NBR90 Shore A o-Rings – Type 61 flanges only

Bonded Washers
Popular bonded washer sizes (Dowty Washer)

Tools
O-ring picks
O-ring measuring cone and chart
U-ring installation tools and kits

05/06 20/1
Prod Code Kit Description Qty Contents Description
GK-90017 O-Ring Cord NBR70 Splicing kit 1 Quick dry adhesive
1 Cutting & splicing jig
1 Razor blade
1m ea Imp Cord 070 103 139 210 275
1m ea Met Cord 1.5 2.0 2.5 3.0 3.5
4.0 5.0 5.7 8.4
GKI-10017 O-Rings NBR70, 436 O-Rings, 36 sizes 25ea 005 006 007 008 009 010 011
15ea 012 110
10ea 013 014 015 016 017 018 111
112 113 114 115 116 210 211
7ea 117 118 119 120 121 212 213
214 215 216 217 218 219
GKI-10019 O-Rings NBR90, 436 O-Rings, 36 sizes 25ea 005 006 007 008 009 010 011
15ea 012 110
10ea 013 014 015 016 017 018 111
112 113 114 115 116 210 211
7ea 117 118 119 120 121 212 213
214 215 216 217 218 219
GKI-10027 O-Rings Viton75, 436 O-Rings, 36 sizes 25ea 005 006 007 008 009 010 011
15ea 012 110
10ea 013 014 015 016 017 018 111
112 113 114 115 116 210 211
7ea 117 118 119 120 121 212 213
214 215 216 217 218 219
GKI-10017W O-Rings NBR70 Warehouse, 20ea 001 002 003 004 005 006 007
1110 O-Rings, 150 sizes 008 009 010 011 012 013 014
015 016
15ea 110 111 112 113 114 115 116
10ea 017 018 019 020 021 022 023
024 117 118 119 120 121 122
123 124 210 211 212 213 214
215 216
7ea 025 026 027 028 029 030 031
5ea 032 033 034 035 036 037 038
039 040 041 042 043 125 126
127 128 129 130 131 132 133
134 135 136 137 138 139 140
141 142 217 218 219 220 221
222 223 224 225 226 227 228
229 325 326 327 328 901 902
903 904 905 906 907 908 909
910 911 912 913 914 916 918
920 924 928 932
4ea 329 330
3ea 143 144 145 146 230 231 232
Ancillary
Grab Kits

2ea 044 045 046 147 148 149 150

151 233 234 235 236 237 331
332 333 334 335 336 337 338

05/06 20/3
NR
S E A L S

Prod Code Kit Description Qty Contents Description

GKI-10019W O-Ring NBR90 Warehouse, 20ea 001 002 003 004 005 006 007
1110 O-Rings, 150 sizes 008 009 010 011 012 013 014
015 016
15ea 110 111 112 113 114 115 116
10ea 017 018 019 020 021 022 023
024 117 118 119 120 121 122
123 124 210 211 212 213 214
215 216
7ea 025 026 027 028 029 030 031
5ea 032 033 034 035 036 037 038
039 040 041 042 043 125 126
127 128 129 130 131 132 133
134 135 136 137 138 139 140
141 142 217 218 219 220 221
222 223 224 225 226 227 228
229 325 326 327 328 901 902
903 904 905 906 907 908 909
910 911 912 913 914 916 918
920 924 928 932
4ea 329 330
3ea 143 144 145 146 230 231 232
2ea 044 045 046 147 148 149 150
151 233 234 235 236 237 331
332 333 334 335 336 337 338
Our warehouse kit is ideally suited for the repair shop that needs a large on-hand selection of o-rings to ensure quick
repair of all machine types. Each size is individually packed in a heavy duty Zip-lock bag for protection. All stored in a
sturdy styrene cabinet with slide-out draws for easy access. Included is a card showing the size, dimensions and draw
location for each ring.
GKI-10019H O-Rings NBR90, Hose end & adaptors 8ea 011 012 014 016 018 021 025
029 210 214 219 221 223 228
902 903 904 905 906 908 910
912 914 916 920 924 932

20/4 05/06
Prod Code Kit Description Qty Contents Description
GKI-10019M O-ring NBR90 mega kit, 5-in-1 box, 1415 Pieces in 81 sizes
Box 1 – SAE Flange O-Rings 10ea 1⁄2 3⁄4 1
5ea 1 1⁄4 1 1⁄2 2
Box 2 – Boss O-Rings NBR90 25ea 904 907 908 910
15ea 903 906 912
10ea 916
Box 3 – 1/16 c/s O-Rings NBR70 25ea 006 007 008 009 010 011 012
013 014 015 016 017 018
20ea 019 020 021
15ea 022 023 024 025 026 028
10ea 029 030
Box 4 – 3/32 c/s O-Rings NBR70 25ea 109 110 111 112 113 114 115
116 117 118
20ea 119 120
15ea 121 122 123 124 125 126 127
10ea 128 129 131 133
5ea 135
Box 5 – 1/8 c/s O-Rings NBR70 20ea 210 211 212 213 214
15ea 215 216 217 218 219 220 221
222
10ea 223 224 226 228 232 236
GKI-10117 O-Rings NBR70, 276 O-Rings, 25 sizes 20ea 017 023 024
GKI-10119 O-Rings NBR90 18ea 012
10ea 013 014 015 016 018 019 020
021 022 025 026 027 028 029
8ea 006 007 008 009 010 011
GKI-10217 O-Rings NBR70, 218 O-rings, 25 sizes 6ea 104 105 106 107 108 109
8ea 111 112 113 116 117 118 119
120 122 123 124 125 126 127
128
12ea 110
16ea 114 115 121
GKI-10219 O-Rings NBR90, 218 O-rings, 25 sizes 6ea 104 105 106 107 108 109
8ea 111 112 113 116 117 118 119
120 122 123 124 125 126 127
128
12ea 110
16ea 114 115 121
GKI-10619 O-Rings NBR90, Flange & Tube boss 10ea Flange 1⁄2 3⁄4 1 1 1⁄4 1 1⁄2 2
Ancillary

fitting, 160 O-Rings, 16 sizes

Grab Kits

10ea Tube 1⁄4 5/16 3/8 1⁄2 5/8 3⁄4

7/8 1 1 1⁄4 1 1⁄2

05/06 20/5
NR
S E A L S

Prod Code Kit Description Qty Contents Description

GKI-10030 O-Rings PTFE, 325 O-Rings, 36 sizes 15ea 005 006 007 008 009 010 011
012
10ea 013 014 015 016 017 018
10ea 110 111 112 113 114 115 116
5ea 117 118 119 120 121
5ea 210 211 212 213 214 215 216
217 218 219
GKM-10817 O-Rings NBR70 25ea P3
Japanese Industrial Metric
20ea P4 P5 P6
380 O-Rings, 36 sizes
15ea P7 P8 P9 P10 P10A P11 P11.2
12ea P12 P12.5 P14 P15 P16
8ea P18 P20 P21 P22
7ea G30 P24 P25 P25.5 P26 P28
6ea G25 P29 P29.5 P30 P31 P31.5 V24
5ea P22A P22.4
4ea V15
GKM-10819 O-Rings NBR90 20ea P3 P4
Japanese Industrial Metric
18ea P5 P6 P7 P8 P9
396 O-Rings, 30 sizes
14ea P10A P11 P12 P14 P16 P18
13ea P20
12ea G22 G25
11ea G20 G30 G35 G40 G45
10ea P22.4 P25 P26 P30 P32 P34 P36
P40 P48
GKM-10917 O-Rings NBR70, European Metric 20ea 1.5c/s 5.0
500 O-Rings, 36 sizes
20ea 1.6c/s 2.2 3.1 4.1 7.1
20ea 2.0c/s 4.0 6.0
15ea 1.5c/s 13.0
15ea 1.6c/s 9.1 10.1 13.1
15ea 2.0c/s 8.0 9.0 10.0 12.0
15ea 2.4c/s 4.3 5.3 5.6 7.6 8.3 8.6
10ea 1.5c/s 16.0
10ea 2.0c/s 14.0 16.0 19.0 20.0
10ea 2.5c/s 10.0 13.0 14.0 15.0 17.0 18.0
19.0
10ea 3.0c/s 9.0 10.0 11.0

20/6 05/06
Prod Code Kit Description Qty Contents Description
GKM-10919 O-Rings NBR90, European Metric 20ea 1.5c/s 5.0
500 O-Rings, 36 sizes
20ea 1.6c/s 2.2 3.1 4.1 7.1
20ea 2.0c/s 4.0 6.0
15ea 1.5c/s 13.0
15ea 1.6c/s 9.1 10.1 13.1
15ea 2.0c/s 8.0 9.0 10..0 12.0
15ea 2.4c/s 4.3 5.3 5.6 7.6 8.3 8.6
10ea 1.5c/s 16.0
10ea 2.0c/s 14.0 16.0 19.0 20.0
10ea 2.5c/s 10.0 13.0 14.0 15.0 17.0 18.0
19.0
10ea 3.0c/s 9.0 10.0 11.0
GKI-30017 Quad Rings NBR70 10ea 005 006 007 008 009 010 011
226 Quad Rings, 36 sizes 012
6ea 013 014 015 016 110 111 112
113 114 115 116
5ea 017 018 210 211 212 213 214
215 216 217 218 219
4ea 117 118 119 120 121
GKI-20099C Flange Seals, 60 pieces, 6 sizes 10ea 1⁄2 3⁄4 1 1 1⁄4 1 1⁄2 2
GKI-20599 Flange Seals, 60 pieces, 6 sizes 10ea Flange 1⁄2 3⁄4 1 1 1⁄4 1 1⁄2 2
O-Rings NBR90
10ea Tube 1⁄4 5/16 3/8 1⁄2 5/8 3⁄4
Tube boss fittings, 100 O-Rings, 10 sizes
7/8 1 1 1⁄4 1 1⁄2
Total 160 pieces, 16 sizes
10ea o-rings 1/2 3/4 1 1 1/4 1 1/2 2
GKI-80019 Back up rings NBR90 10ea 005 006 007 008 009 010 011
293 Back ups, 36 sizes 012 013 014 015 016 017 018
110 111 112 113 114 115 116
7ea 210 211 212 213
5ea 117 118 119 120 121 214 215
216 217 218 219
GKI-80030 Back up rings PTFE 15ea 005 006 007 008 009 010 011
325 Back ups, 36 sizes 012
Solid, scarf cut
10ea 013 014 015 016 017 018 110
111 112 113 114 115 116
5ea 117 118 119 120 121 210 211
212 213 214 215 216 217 218
219
GKM-40010 Bonded Washers, German Metric 25ea BWM-202 BWM-203 BWM-207
BWM-213 BWM-217 BWM-222
BWM-229
20ea BWM-232 BWM-233 BWM-238
Ancillary
Grab Kits

BWM-239 BWM-240
10ea BWM-243 BWM-244
5ea BWM-247 BWM-248

05/06 20/7
NR
S E A L S

Prod Code Tool Type Description

T-001 Seal / O-Ring picks 4 pieces with handles, pick and hook type
T-002 Seal / O-Ring picks 4 attachements, 1 handle with magnet, pick and hook
T-020 O-Ring Measuring cone Measures 184 of the most popular Imperial o-ring sizes
in 5 standard cross sections
T-021 O-Ring Measuring chart For measuring most sizes of Imperial o-rings
T-100 U-Ring Installation Seal range 3⁄4" to 1 1⁄4" 19 to 32mm
T-101 U-Ring Installation Seal range 1 3/8" to 1 7/8" 35 to 48mm
T-102 U-Ring Installation Seal range 2" to 3" 50 to 76mm
T-105 U-Ring Installation Tool kit Contains above 3 tools in a plastic case

20/8 05/06
 CFS
Flange Seal

NR
S E A L S

Design
Ancillary

CFS flange seal is designed to suit the SAE J518 range

of flanges and common metric flange sizes. The seal is
manufactured in a high performance grade of Polyurethane
with excellent resistance to extrusion and compression set over
a wide temperature range. They provide a direct replacement
for o-rings without any modifications of existing grooves. This
design offers many performance advantages over common o-
ring or rubber based flange seals, including the elimination of
the ‘pumping effect’.

SAE flange sizes Operating Conditions

Snap in easy fit Pressure

400 Bar
Heavy duty 6,000 Psi

Temperature
O-ring replacement
-40° to 110° C
-40° to 230° F

Surface Finish µmRa

mating face 3.0
sealing face 0.8
L1
Mati ng Tolerances
f ace
ØD Ød L1 L2
-0.000 ±0.015 -0.000 -0.010
r +0.005 +0.005 +0.000
0˚-5˚

S e a ling Radii
faces
r 0.030
ØD
r GKI-20099C Grab box
Ød
60 pieces 6 sizes
sizes 1⁄2 3⁄4 1 1 1⁄4 1 1⁄2 2
qty 10 10 10 10 10 10

Typical Examples
Static

L2

05/06 20/9
 ØD 0˚-5˚

Ød

L2 r
L1

11 CFS

Nominal SAE J518

FLANGE ØD Ød L1 L2 CFS 11 Flange No. SIZE CODE
1/2 1.000 0.670 0.110 0.010 G 08 0500
3/4 1.250 0.920 0.110 0.010 G 12 0750
1 1.560 1.230 0.110 0.010 G 16 1000
1 1/4 1.750 1.420 0.110 0.010 G 20 1250
1 1/2 2.125 1.785 0.110 0.010 G 24 1500
2 2.500 2.160 0.110 0.010 G 32 2000
2 1/2 3.005 2.665 0.110 0.010 G 40 2500
3 3.625 3.285 0.110 0.010 G 48 3000
3 1/2 4.115 3.775 0.110 0.010 G 56 3500
4 4.615 4.275 0.110 0.010 G 64 4000
5 5.615 5.275 0.110 0.010 G 80 5000
33.5 26.3 2.2 0.25 G M20
45.0 36.2 3.3 0.25 G M30

Flange Seals
Ancillary

05/06 20/11
 ØD

Ød2

Ød1

L2

L1

Standard Self centering

Burst Psr.
ØD Ød1 Ød2 L1 L2 Min BAR Material Standard Type Product code
+0.15 +0.10 +0.10 +0.01 +0.25
-0.00 -0.10 -0.10 -0.01 -0.00
7.0 4.5 5.4 1.0 0.3 1270 Steel/NBR90 German M4 Self Centred BWM-202
9.0 5.7 6.8 1.0 0.3 1400 Steel/NBR90 German M5 Self Centred BWM-203
10.0 5.7 7.4 1.0 0.3 1500 Steel/NBR90 German M5 Self Centred BWM-204
9.2 6.2 7.2 1.0 0.3 1220 Steel/NBR90 German M5.5 Standard BWM-205
10.0 6.7 8.0 1.0 0.3 1120 Steel/NBR90 German M6 Self Centred BWM-206
11.0 6.7 8.2 1.0 0.3 1480 Steel/NBR90 German M6 Standard BWM-207
13.0 8.7 10.0 1.0 0.3 1330 Steel/NBR90 German M8 Self Centred BWM-212
14.0 8.7 10.4 1.0 0.3 1510 Steel/NBR90 German M8 Self Centred BWM-213
13.3 9.3 10.5 1.0 0.3 1200 Steel/NBR90 German M8.5 Self Centred BWM-215
16.0 10.7 12.4 1.5 0.4 1300 Steel/NBR90 German M10 Self Centred BWM-217
18.0 10.7 12.4 1.5 0.4 1880 Steel/NBR90 German M10 Self Centred BWM-218
19.1 11.8 12.7 1.5 0.4 1250 Steel/NBR90 German M11 Standard BWM-219
18.0 12.7 14.4 1.5 0.4 1150 Steel/NBR90 German M12 Self Centred BWM-222
20.0 12.7 14.4 1.5 0.4 1680 Steel/NBR90 German M12 Standard BWM-223
22.0 13.7 15.4 1.5 0.4 1810 Steel/NBR90 German M13 Self Centred BWM-225
22.0 14.7 16.4 1.5 0.4 1510 Steel/NBR90 German M14 Self Centred BWM-227
24.0 16.7 18.4 1.5 0.4 1370 Steel/NBR90 German M16 Self Centred BWM-229
24.0 17.4 19.2 1.5 0.4 1150 Steel/NBR90 German M17 Standard BWM-230
24.7 18.0 20.1 1.5 0.4 1070 Steel/NBR90 German M17.5 Standard BWM-231
26.0 18.7 20.4 1.5 0.4 1260 Steel/NBR90 German M18 Self Centred BWM-232
28.0 20.7 22.5 1.5 0.4 1140 Steel/NBR90 German M20 Self Centred BWM-233
28.7 21.5 23.3 2.5 0.4 1080 Steel/NBR90 German M21 Standard BWM-234
30.0 22.7 24.4 2.0 0.4 1080 Steel/NBR90 German M22 Self Centred BWM-236
32.0 24.7 26.4 2.0 0.4 1000 Steel/NBR90 German M24 Self Centred BWM-238
35.0 26.7 28.4 2.0 0.4 1090 Steel/NBR90 German M26 Self Centred BWM-239
36.0 27.2 29.0 2.0 0.4 1130 Steel/NBR90 German M27 Self Centred BWM-240
42.0 33.7 35.8 2.0 0.4 840 Steel/NBR90 German M33 Self Centred BWM-243
43.0 34.3 36.4 2.0 0.4 870 Steel/NBR90 German M34 Standard BWM-244
53.0 42.7 44.4 3.0 0.4 930 Steel/NBR90 German M42 Standard BWM-247
59.0 48.7 50.8 3.0 0.4 790 Steel/NBR90 German M48 Standard BWM-248
Bonded Washers
Ancillary

05/06 20/13
 RJS
NR
S E A L S
Rotary Joint seals

Design
Rotary joint seal

RJS rotary pressure seal is a seal designed specifically for

use in hydraulic swivel joints. It is manufactured in high
specification dual durometer Polyurethane to provide ease of
installation and excellent sealing characteristics. These are a
popular replacement seal for Asian excavators.

Key Features
Medium to heavy duty Operating Conditions

Compact housing Pressure

350 Bar
Specifically for swivel 5,000 Psi

joints Temperature
-40° to 110°C
-40° to 230°F

Speed
1.0m /sec
3.0'/sec

Surface Finish µmRa

REPLACEMENT SEAL ONLY
ØD

C/S Ød
25º Tolerances
REPLACEMENT SEAL ONLY
C

Chamfer Radii
G/2 REPLACEMENT SEAL ONLY

L
r

Typical Examples
Reciprocating Rotary Oscillating Helix

05/06 20/15
 Charts
Metric & Imperial Conversion

NR
S E A L S

Frac. Imp dec. Met mm Frac. Imp dec. Met mm Frac. Imp dec. Met mm Frac. Imp dec. Met mm
0.004 0.100 0.335 8.500 0.709 18.000 1 1/4 1.250 31.750
0.010 0.250 11/32 0.344 8.731 23/32 0.719 18.256 1.260 32.000
1/64 0.016 0.397 0.354 9.000 0.728 18.500 1 9/32 1.281 32.544
0.020 0.510 23/64 0.359 9.128 47/64 0.734 18.653 1.299 33.000
0.030 0.762 0.374 9.500 0.748 19.000 1 5/16 1.313 33.338
1/32 0.031 0.794 3/8 0.375 9.525 3/4 0.750 19.050 1.339 34.000
0.039 1.000 25/64 0.391 9.922 49/64 0.766 19.447 1 11/32 1.344 34.131
3/64 0.047 1.191 0.394 10.000 25/32 0.781 19.844 1 3/8 1.375 34.925
0.059 1.500 13/32 0.406 10.319 0.787 20.000 1.378 35.000
1/16 0.063 1.588 0.413 10.500 51/64 0.797 20.241 1 13/32 1.406 35.719
5/64 0.078 1.984 27/64 0.422 10.716 13/16 0.813 20.638 1.417 36.000
0.079 2.000 0.433 11.000 0.827 21.000 1 7/16 1.438 36.513
3/32 0.094 2.381 7/16 0.438 11.113 53/64 0.828 21.034 1.457 37.000
0.098 2.500 0.452 11.500 27/32 0.844 21.431 1 15/32 1.469 37.306
7/64 0.109 2.778 29/64 0.453 11.510 55/64 0.859 21.828 1.496 38.000
0.118 3.000 15/32 0.469 11.906 0.866 22.000 1 1/2 1.500 38.100
1/8 0.125 3.175 0.472 12.000 7/8 0.875 22.225 1 17/32 1.531 38.894
0.138 3.500 31/64 0.484 12.303 57/64 0.891 22.622 1.535 39.000
9/64 0.141 3.572 0.492 12.500 0.906 23.000 1 9/16 1.563 39.688
5/32 0.156 3.969 1/2 0.500 12.700 59/64 0.922 23.416 1.575 40.000
0.158 4.000 0.512 13.000 15/16 0.938 23.813 1 19/32 1.594 40.481
11/64 0.172 4.366 29/32 0.516 13.097 0.945 24.000 1.614 41.000
0.177 4.500 17/32 0.531 13.494 61/64 0.953 24.209 1 5/8 1.625 41.275
3/16 0.188 4.763 35/64 0.547 13.891 31/32 0.969 24.606 1.654 42.000
0.197 5.000 0.551 14.000 0.984 25.000 1 21/32 1.656 42.069
13/64 0.203 5.159 9/16 0.563 14.288 63/64 0.984 25.003 1 11/16 1.688 42.863
0.217 5.500 0.571 14.500 1 1.000 25.400 1.693 43.000
7/32 0.219 5.556 37/64 0.578 14.684 1.024 26.000 1 23/32 1.719 43.656
15/64 0.234 5.953 0.591 15.000 1 1/32 1.031 26.194 1.732 44.000
0.236 6.000 19/32 0.594 15.081 1 1/16 1.063 26.988 1 3/4 1.750 44.450
1/4 0.250 6.350 39/64 0.609 15.478 1.063 27.000 1.772 45.000
0.256 6.500 5/8 0.625 15.875 1 3/32 1.094 27.781 1 25/32 1.781 45.244
17/64 0.266 6.747 0.630 16.000 1.102 28.000 1.811 46.000
0.276 7.000 41/64 0.641 16.272 1 1/8 1.125 28.575 1 13/16 1.813 46.038
9/32 0.281 7.144 0.650 16.500 1.142 29.000 1 27/32 1.844 46.831
0.295 7.500 21/32 0.656 16.669 1 5/32 1.156 29.369 1.850 47.000
19/64 0.297 7.541 0.669 17.000 1.181 30.000 1 7/8 1.875 47.625
Conversion Charts

5/16 0.313 7.938 43/64 0.672 17.066 1 3/16 1.188 30.163 1.890 48.000
Ancillary

0.315 8.000 11/16 0.688 17.463 1 7/32 1.219 30.956 1 29/32 1.906 48.419
21/64 0.328 8.334 45/64 0.703 17.859 1.221 31.000 1.929 49.000

05/06 21/1
 Charts
Metric & Imperial Conversion

NR
S E A L S

Frac. Imp dec. Met mm Frac. Imp dec. Met mm Frac. Imp dec. Met mm Frac. Imp dec. Met mm
1 15/16 1.938 49.213 2.638 67.000 3 11/32 3.344 84.931 4 3/8 4.375 111.125
1.969 50.000 2 21/32 2.656 67.469 3.347 85.000 4 7/16 4.438 112.713
1 31/32 1.969 50.006 2.677 68.000 3 3/8 3.375 85.725 4 1/2 4.500 114.300
2 2.000 50.800 2 11/16 2.688 68.263 3.386 86.000 4.528 115.000
2.008 51.000 2.717 69.000 3 13/32 3.406 86.519 4 9/16 4.563 115.888
2 1/32 2.031 51.594 2 23/32 2.719 69.056 3.425 87.000 4 5/8 4.625 117.475
2.047 52.000 2 3/4 2.750 69.850 3 7/16 3.438 87.313 4 11/16 4.688 119.063
2 1/16 2.063 52.388 2.756 70.000 3.465 88.000 4.724 120.000
2.087 53.000 2 25/32 2.781 70.644 3 15/32 3.469 88.106 4 3/4 4.750 120.650
2 3/32 2.094 53.181 2.795 71.000 3 1/2 3.500 88.900 4 13/16 4.813 122.238
2 1/8 2.125 53.975 2 13/16 2.813 71.438 3.504 89.000 4 7/8 4.875 123.825
2.126 54.000 2.835 72.000 3 17/32 3.531 89.694 4.921 125.000
2 5/32 2.156 54.769 2 27/32 2.844 72.231 3.543 90.000 4 15/16 4.938 125.413
2.165 55.000 2.874 73.000 3 9/16 3.563 90.488 5 5.000 127.000
2 3/16 2.188 55.563 2 7/8 2.875 73.025 3.583 91.000 5.118 130.000
2.205 56.000 2 29/32 2.906 73.819 3 19/32 3.594 91.281 5 1/4 5.250 133.350
2 7/32 2.219 56.356 2.913 74.000 3.622 92.000 5 1/2 5.500 139.700
2.244 57.000 2 15/16 2.938 74.613 3 5/8 3.625 92.075 5.512 140.000
2 1/4 2.250 57.150 2.953 75.000 3 21/32 3.656 92.862 5 3/4 5.750 146.050
2 9/32 2.281 57.944 2 31/32 2.969 75.406 3 11/16 3.687 93.650 5.906 150.000
2.283 58.000 2.992 76.000 3 23/32 3.719 94.463 6 6.000 152.400
2 5/16 2.313 58.738 3 3.000 76.200 3 3/4 3.750 95.250 6 1/4 6.250 158.750
2.323 59.000 3 1/32 3.031 76.994 3 25/32 3.781 96.037 6.299 160.000
2 11/32 2.344 59.531 3.032 77.000 3 13/16 3.812 96.825 6 1/2 6.500 165.100
2.362 60.000 3 1/16 3.063 77.788 3 27/32 3.844 97.638 6.693 170.000
2 3/8 2.375 60.325 3.071 78.000 3 7/8 3.875 98.425 6 3/4 6.750 171.450
2.402 61.000 3 3/32 3.094 78.581 3.898 99.000 7 7.000 177.800
2 13/32 2.406 61.119 3.110 79.000 3 29/32 3.906 99.219 7.087 180.000
2 7/16 2.438 61.913 3 1/8 3.125 79.375 3.937 100.000 7.480 190.000
2.441 62.000 3.150 80.000 3 15/16 3.938 100.013 7 1/2 7.500 190.500
2 15/32 2.469 62.706 3 5/32 3.156 80.169 3 31/32 3.969 100.806 7.874 200.000
2.480 63.000 3 3/16 3.188 80.963 3.976 101.000 8 8.000 203.200
2 1/2 2.500 63.500 3.189 81.000 4 4.000 101.600 8.268 210.000
2.520 64.000 3 7/32 3.219 81.756 4 1/16 4.063 103.188 8 1/2 8.500 215.900
2 17/32 2.531 64.294 3.228 82.000 4 1/8 4.125 104.775 8.661 220.000
2.559 65.000 3 1/4 3.250 82.550 4.134 105.000 9 9.000 228.600
2 9/16 2.563 65.088 3.268 83.000 4 3/16 4.188 106.363 9.055 230.000
2 19/32 2.594 65.881 3 9/32 3.281 83.344 4 1/4 4.250 107.950 9.449 240.000
2.598 66.000 3.307 84.000 4 5/16 4.313 109.538 9 1/2 9.500 241.300
2 5/8 2.625 66.675 3 5/16 3.313 84.138 4.331 110.000 9.843 250.000

21/2 05/06
 Charts
Metric & Imperial Conversion

NR
S E A L S

Frac. Imp dec. Met mm

10 10.000 254.000
10.236 260.000
10.630 270.000
11 11.000 279.400
11.024 280.000
11.417 290.000
11.811 300.000
12 12.000 304.800
13 13.000 330.200
13.780 350.000
14 14.000 355.600
15 15.000 381.000
15.748 400.000
16 16.000 406.400
17 17.000 431.800
17.717 450.000
18 18.000 457.200
19 19.000 482.601
19.685 500.000
20 20.000 508.000

Conversion Charts
Ancillary

05/06 21/3
 Charts
Imperial Tolerance Chart
NR
S E A L S

Nom. Size Inches Shafts (outside diameters) Units 0.001 inches Bores (inside diameters) Units 0.001 inches
over to f8 f9 h8 h9 h10 h11 js10 js11 H8 H9 H10 H11 Js11
0.04 0.12 -0.3 -0.3 0 0 0 0 +0.8 +1.3 +0.6 +1.0 +1.6 +2.5 +1.3
-0.9 -1.2 -0.6 -1.0 -1.6 -2.5 -0.8 -1.3 0 0 0 0 -1.3
0.12 0.24 -0.4 -0.4 0 0 0 0 +0.9 +1.5 +0.7 +1.2 +1.8 +3.0 +1.5
-1.1 -1.6 -0.7 -1.2 -1.8 -3.0 -0.9 -1.5 0 0 0 0 -1.5
0.24 0.40 -0.5 -0.5 0 0 0 0 +1.1 +1.8 +0.9 +1.4 +2.2 +3.5 +1.8
-1.4 -1.9 -0.9 -1.4 -2.2 -3.5 -1.1 -1.8 0 0 0 0 -1.8
0.40 0.71 -0.6 -0.6 0 0 0 0 +1.4 +2.0 +1.0 +1.6 +2.8 +4.0 +2.0
-1.6 -2.3 -1.0 -1.6 -2.8 -4.0 -1.4 -2.0 0 0 0 0 -2.0
0.71 1.19 -0.8 -0.8 0 0 0 0 +1.8 +2.5 +1.2 +2.0 +3.5 +5.0 +2.5
-2.0 -2.8 -1.2 -2.0 -3.5 -5.0 -1.8 -2.5 0 0 0 0 -2.5
1.19 1.97 -1.0 -1.0 0 0 0 0 +2.0 +3.0 +1.6 +2.5 +4.0 +6.0 +3.0
-2.6 -3.4 -1.6 -2.5 -4.0 -6.0 -2.0 -3.0 0 0 0 0 -3.0
1.97 3.15 -1.2 -1.2 0 0 0 0 +2.3 +3.5 +1.8 +3.0 +4.5 +7.0 +3.5
-3.0 -4.1 -1.8 -3.0 -4.5 -7.0 -2.3 -3.5 0 0 0 0 -3.5
3.15 4.73 -1.4 -1.4 0 0 0 0 +2.5 +4.5 +2.2 +3.5 +5.0 +9.0 +4.5
-3.6 -4.8 -2.2 -3.5 -5.0 -9.0 -2.5 -4.5 0 0 0 0 -4.5
4.73 7.09 -1.6 -1.6 0 0 0 0 +3.0 +5.0 +2.5 +4.0 +6.0 +10.0 +5.0
-4.1 -5.6 -2.5 -4.0 -6.0 -10.0 -3.0 -5.0 0 0 0 0 -5.0
7.09 9.85 -2.0 -2.0 0 0 0 0 +3.5 +6.0 +2.8 +4.5 +7.0 +12.0 +6.0
-4.8 -6.5 -2.8 -4.5 -7.0 -12.0 -3.5 -6.0 0 0 0 0 -6.0
9.85 12.41 -2.2 -2.2 0 0 0 0 +4.0 +6.0 +3.0 +5.0 +8.0 +12.0 +6.0
-5.2 -7.3 -3.0 -5.0 -8.0 -12.0 -4.0 -6.0 0 0 0 0 -6.0
12.41 15.75 -2.5 -2.5 0 0 0 0 +4.5 +7.0 +3.5 +6.0 +9.0 +14.0 +7.0
-6.0 -8.0 -3.5 -6.0 -9.0 -14.0 -4.5 -7.0 0 0 0 0 -7.0
15.75 19.69 -2.8 -2.8 0 0 0 0 +5.0 +8.0 +4.0 +6.0 +10.0 +16.0 +8.0
-6.5 -8.8 -4.0 -6.0 -10.0 -16.0 -5.0 -8.0 0 0 0 0 -8.0
16.69 24.80 -3.0 -3.0 0 0 0 0 +5.5 +8.7 +4.3 +6.9 +11.0 +17.3 +8.7
-7.0 -9.9 -4.3 -6.9 -11.0 -17.3 -5.5 -8.7 0 0 0 0 -8.7
24.80 31.49 -3.1 -3.1 0 0 0 0 +6.3 +9.8 +4.9 +7.9 +12.6 +19.7 +9.8
-8.1 -11.0 -4.9 -7.9 -12.6 -19.7 -6.3 -9.8 0 0 0 0 -9.8

21/4 05/06
 Charts
Metric Tolerance Chart
NR
S E A L S

Nom. Sizes mm Shafts (outside diameters) Units 0.001 mm Bores (inside diameters) Units 0.001 mm
over to f8 f9 h8 h9 h10 h11 js10 js11 H8 H9 H10 H11 Js11
1.60 3 -6 -6 0 0 0 0 +20 +30 +14 +25 +40 +60 +30
-20 -31 -14 -25 -40 -60 -20 -30 0 0 0 0 -30
3 6 -10 -10 0 0 0 0 +24 +37.5 +18 +30 +48 +75 +37.5
-28 -40 -18 -30 -48 -75 -24 -37.5 0 0 0 0 -37.5
6 10 -13 -13 0 0 0 0 +29 +45 +22 +36 +58 +90 +45
-35 -49 -22 -36 -58 -90 -29 -45 0 0 0 0 -45
10 18 -16 -16 0 0 0 0 +35 +55 +27 +43 +70 +110 +55
-43 -59 -27 -43 -70 -110 -35 -55 0 0 0 0 -55
18 30 -20 -20 0 0 0 0 +42 +65 +33 +52 +84 +130 +65
-53 -72 -33 -52 -84 -130 -42 -65 0 0 0 0 -65
30 50 -25 -25 0 0 0 0 +50 +80 +39 +62 +100 +160 +80
-64 -87 -39 -62 -100 -160 -50 -80 0 0 0 0 -80
50 80 -30 -30 0 0 0 0 +60 +95 +46 +74 +120 +190 +95
-76 -104 -46 -74 -120 -190 -60 -95 0 0 0 0 -95
80 120 -36 -36 0 0 0 0 +70 +110 +54 +87 +140 +220 +110
-90 -123 -54 -87 -140 -220 -70 -110 0 0 0 0 -110
120 180 -43 -43 0 0 0 0 +80 +125 +63 +100 +160 +250 +125
-106 -143 -63 -100 -160 -250 -80 -125 0 0 0 0 -125
180 250 -50 -50 0 0 0 0 +92 +145 +72 +115 +185 +290 +145
-122 -165 -72 -115 -185 -290 -92 -145 0 0 0 0 -145
250 315 -56 -56 0 0 0 0 +105 +160 +81 +130 +210 +320 +160
-137 -186 -81 -130 -210 -320 -105 -160 0 0 0 0 -160
315 400 -62 -62 0 0 0 0 +115 +180 +89 +140 +230 +360 +180
-151 -212 -89 -140 -230 -360 -115 -180 0 0 0 0 -180
400 500 -68 -68 0 0 0 0 +125 +200 +97 +155 +250 +400 +200
-165 -223 -97 -155 -250 -400 -125 -200 0 0 0 0 -200
500 630 -76 -76 0 0 0 0 +140 +220 +110 +175 +280 +440 +220
-186 -251 -110 -175 -280 -440 -140 -220 0 0 0 0 -220
630 800 -80 -80 0 0 0 0 +160 +250 +125 +200 +320 +500 +250
-205 -280 -125 -200 -320 -500 -160 -250 0 0 0 0 -250
Tolerance Charts
Ancillary

05/06 21/5
 Conditions
NR
S E A L S

NORMAN RICHARDS PTY LTD COPYRIGHT

Unless otherwise indicated, the material in this catalogue is copyright © of Norman Richards Pty Ltd ABN 43958671889 (Norman Richards) and protected by the copyright
laws of Australia. All rights are reserved. You must not modify copy or redistribute this catalogue or any part of it. If this catalogue is in electronic or CD Rom form you also
must not print it or any part of it.
Warranty
This catalogue is for information only. The details of the products in this catalogue were provided by the manufacturer of the products. Norman Richards does not warrant
that the products will comply with those details. Norman Richards supplies products strictly in accordance with specifications given by our customers. We do not provide
any advice or recommendation about the suitability of products for any particular use. We do not warrant that products are suitable for the use intended by our customers.
Before ordering any products from Norman Richards you must satisfy yourself that the products you are ordering are suitable for your intended use of the products.
Payment terms
When ordering products from Norman Richards you agree that payment must be made in full for all products you order at the time stated in writing by Norman Richards,
including in any credit application. If no time is stated in writing by Norman Richards, payment must be made in full within thirty days of the date of the monthly statement.
If payment is not made on these terms, Norman Richards may charge you interest on any unpaid amount. Interest will be charged daily and from the date payment is due
until payment is received.
1 Conditions of sale
Definitions
In these conditions:
(a) The Company means Norman Richards Pty Ltd ABN 43958671 889
(b) The customer is any party who requests that the company supply Products to it
(c) The Order means the agreement between the Customer and the Company for the supply of Products by the Company to the Customer
(d) Products means any of the Company’s products that are ordered by the Customer
(e) Quote means a quote for the cost of the Products given by the Company to the Customer
(f) Shipping address means the address specified by the customer for delivery of the Products.
2 Application
By ordering Products, the Customer accepts these conditions and acknowledges that they:
(a) Apply to and are incorporated into every order
(b) May only be changed by a written statement from the Company
(c) Supersede and are not modified or excluded by any conditions of purchase stated verbally or appearing on any document provided by the Customer.
3 Price
(a) The price of the Products is:
(b) The price stated in the Quote, if the Customer makes an order within 30 days from the date of the Quote or any other period stated in the Quote, or
(c) If no quote has been provided, the price stated in the Company’s current price list.
(d) The Customer must pay any GST payable on the supply of the Products.
4 Terms of payment
(a) The Customer must pay the Company in full for the Products by:
(i) The time stated in writing by the Company, including in any credit application, or
(ii) If no time is stated in writing by the Company, the last day of the month following the month of supply.
(b) If the Customer does not pay the Company in full for the Products in the time specified in clause 4(a) the Company may charge interest on any unpaid amount
(c) The interest rate will be the rate equivalent to 2% more than the rate charged to the Company for overdraft accommodation by its bankers at that time. Interest accrues
daily and is calculated from the date payment is due to the date of payment in full and payments will be credited to interest first.
5 Delivery
(a) The Company must deliver the Products to the Shipping Address and may deliver the Products in any number of installments.
(b) The Customer acknowledges that delivery times given by the Company are estimates only and that the Company is not liable for:
(i) Any late or non-delivery of the Products or any loss or damage to any installment of the Products whether or not the Company is legally responsible for the party
who caused or contributed to that loss or damage
(ii) Any loss (including consequential loss), damage or delay suffered by the Customer or any third party arising from any late or non-delivery of, or loss or damage to
any installment of the Products.
6 Passing of risk
(a) The risk of loss or damage to the Products passes to the Customer when the Products are delivered to the Shipping Address.
(b) The Customer must insure all Products that are at the Customer’s risk.
7 Retention of title
(a) Despite clause 6(a), title to the Products will not pass to the Customer until all amounts owed by the Customer to the Company are paid in full. Until that time:
(i) The Company:
(1) May at anytime, repossess the Products from any premises and will not be liable for trespass or any resulting damage
(2) May keep or resell any Products repossessed under clause 7(a) (i)
(ii) The Customer:
(1) Must not claim any lien over the Products
(2) Is a bailee of the Products and owes the Company the duties and liabilities of a bailee
(3) Must not supply any of the Products to any party outside of its usual or ordinary course of business or allow any party to acquire any security interest in the
Products
(4) Must properly store and insure the Products.
(b) Despite clause 7(a), if the Customer sells the Products or anything that incorporates any of the Products before paying the Company in full, then the Customer must:
(i) Hold the proceeds of sale representing the price of the Products on trust for the Company as soon as they are received
(ii) Either pays the amount of the proceeds referred to in clause 7(b) (i) to the Company as soon as they are received or pay those proceeds into a separate identifiable
account as trustee for the Company and pay the Company upon request.
8 Cancellation
(a) The Customer cannot cancel an Order unless authorised in writing by the Company.
(b) If the Customer cancels an Order it indemnities the Company against all losses arising from the Order and cancellation.

21/6 05/06
 NR
S E A L S

9 Return
(a) The Customer cannot return:
(i) Any machined, cut or non-standard Products under any circumstances
(ii) Any other Products unless expressly stated in writing by the Company.
(b) If the Customer returns any Products, it may have to pay the Company a re stocking fee of 20% (of the value of the Products) or $5.00 (greater ot) surcharge per line
item to the Company.
(c) If the Customer returns any Products — they must be accompanied with a company credit request form.
10 Acceptances
(a) The Customer must notify the Company within fourteen days of delivery of the Products of any allegation that any Products are not in accordance with the original
Order.
(b) Unless the Customer notifies the Company as set out in clause 10(a) the Customer must accept and pay for the products.
11 Default by customer
(a) The Customer is in default under an Order if it:
(i) Does not pay the Company in full for the Products in the time specified in clause 4(a)
(ii) Has its property seized under any distress or execution
(iii) Enters into a scheme or arrangement with creditors
(iv) Stops payment of or is unable to pay its debts when they fall due
(v) Is placed under any form of insolvency or bankruptcy administration.
(b) If the Customer is in default under clause 11(a), the Company:
(i) Is released from its outstanding obligations to the Customer under any Order and has no liability to the Customer arising out of any Order
(ii) Can recover damages from the Customer for the price of the Products, interest payable under clause 4(b), charges or expenses incurred by the Company as a
consequence of the Customer’s default and any other costs
(iii) Repossess the Products under clause 7(a) (i).
12 Liabilities and indemnities
(a) The Customer acknowledges that the Company:
(i) Supplies the Products in accordance with the specifications given by the Customer and does not warrant that the products are suitable for the use intended by the
Customer
(ii) Relies on specifications provided by the manufacturer of the Products and does not warrant that the products will comply with those specifications
(iii) Is not liable for any advice or recommendation given by the Company, its employees, servants or agents or any other party in relation to the suitability of the
Products for any particular use and the Customer relies on such advice at its own risk.
(b) The Customer:
(i) Must satisfy itself that the Products are suitable for any purpose for which the Customer intends to use or resupply them.
(ii) Indemnifies the Company on a continuing and full indemnity basis in relation to any loss (including consequential loss) caused by the Products suffered by any
person including a third party who has acquired Products from the Customer.
(c) Subject to clause 12(d) and except as expressly provided to the contrary in an order:
(i) All conditions, warranties, undertakings, inducements and representations whether expressed, implied, statutory or otherwise relating in any way to any Products
sold under an Order are excluded
(ii) The Company is not liable to the Customer for any loss (including consequential loss) or damage caused by:
(1) The Products
(2) Any failure or omission by the Company to comply with its obligations
(3) Any failure of the Products to comply with the manufacturer’s specifications or meet the needs of the Customer.
(d) Nothing in these conditions will change any condition, warranty or liability that may be implied by any Australian legislation or regulation where to do so is illegal or
would render any provision of an Order void. In those cases, the Company’s liability will be limited at the option of the Company to any one or more of the following:
(i) Replacement of the Products or the supply of equivalent Products
(ii) Repair of the Products
(iii) Payment of the cost of replacing or repairing the Products or of acquiring equivalent Products
(e) Title to any Products and any defective or replaced parts of the Products will revert to the Company upon the replacement or repair of the Products.
13 General
(a) These conditions are governed by the laws of New South Wales and the parties submit to the non-exclusive jurisdiction of the courts of New South Wales and courts
of appeal from them.
(b) Any of these conditions held to be prohibited, invalid or unenforceable in any jurisdiction is ineffective to the extent of the prohibition, invalidity or unenforceability as to
that jurisdiction without invalidating the rest of these conditions and will not affect the validity or unenforceability of that provision in any other jurisdiction.

APRIL 2005

05/06 21/7