Scribd
Upload
181 views2 pages

Planning, Analysis & Design of A Four-Stored Residential Bulding by Using Staad Pro

1) The document describes a project to analyze and design a 4-story residential building using STAAD Pro software. 2) The analysis involved manually calculating loads and modeling the building in STAAD Pro to analyze the structure under different load combinations including dead, live, wind and seismic loads. 3) The final work was analyzing and designing a 4-story 3D reinforced concrete frame considering self-weight, dead, live, wind and seismic loads as specified by Indian codes and regulations.

Uploaded by

Dharma banothu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
181 views2 pages

Planning, Analysis & Design of A Four-Stored Residential Bulding by Using Staad Pro

1) The document describes a project to analyze and design a 4-story residential building using STAAD Pro software. 2) The analysis involved manually calculating loads and modeling the building in STAAD Pro to analyze the structure under different load combinations including dead, live, wind and seismic loads. 3) The final work was analyzing and designing a 4-story 3D reinforced concrete frame considering self-weight, dead, live, wind and seismic loads as specified by Indian codes and regulations.

Uploaded by

Dharma banothu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

PLANNING, ANALYSIS & DESIGN OF

A FOUR-STORED RESIDENTIAL BULDING BY USING


STAAD PRO
ABSTRACT

The principle objective of this project is to analyse and design a multi-storeyed


building [G +4 (3 dimensional frame)] using STAAD Pro. The design involves
load calculations manually and analysing the whole structure by STAAD Pro.
From model generation, analysis, and design to visualization and result
verification, it is the professional‟s choice. Initially we started with the analysis
of simple 2 dimensional frames and manually checked the accuracy of the
software with our results. The results proved to be very accurate. We analysed
and designed a G+ 4 storey building [2-D Frame] initially for all possible load
combinations [dead, live, wind and seismic loads]. STAAD.Pro has a very
interactive user interface which allows the users to draw the frame and input the
load values and dimensions. Then according to the specified criteria assigned it
analyses the structure and designs the members with reinforcement details for
RCC frames. We continued with our work with some more multi-storeyed 2-D
and 3-D frames under various load combinations. Our final work was the proper
analysis and design of a G +4 3-D RCC frame under various load combinations.
with the dimensions of 3m. The y-axis consisted of G +4 floors. The total
ground floor height was 1.5m had a .The structure was subjected to self-weight,
dead load, live load, wind load and seismic loads under the load case details of
STAAD.Pro. The wind load values were generated by STAAD.Pro considering
the given wind intensities at different heights and strictly abiding by the
specifications of IS 875. Seismic load calculations were done following IS 1893-
2000. The materials were specified and cross-sections of the beam and column
members were assigned. The supports at the base of the structure were also
specified as fixed. The codes of practise to be followed were also specified for
design purpose with other important details. Then STAAD.Pro was used to
analyse the structure and design the members. In the post-processing mode, after
completion of the design, we can work on the structure and study the bending
moment and shear force values with the generated diagrams. We may also check
the deflection of various members under the given loading combinations. The
design of the building is dependent upon the minimum requirements as
prescribed in the Indian Standard Codes. The minimum requirements pertaining
to the structural safety of buildings are being covered by way of laying down
minimum design loads which have to be assumed for dead loads, imposed loads,
and other external loads, the structure would be required to bear. Strict
conformity to loading standards recommended in this code, it is hoped, will
ensure the structural safety of the buildings which are being designed. The
whole structure designed by LIMIT STATE method.

You might also like