8 7 6 5 4 3 2 1

ITEM QTY DWG./INV.No. DESCRIPTION

1 1 C-23257 BALL SCREW, ASSEMBLY
2 1 C-16651 SHAFT, ASSEMBLY
3 1 B-22632 PIN, TARGET
4 1 C-14326 BARREL, ASSEMBLY 21.875 LG
5 1 A-15847 BEARING, MODIFIED
6 1 A-16046 SCREW, SET SKT #10-32 X 3/8 D
7 4 877-A21 ROD, DRAW
8 1 1158-230-002 O-RING, BUNA-N/TEF COAT 2 1/2ID 1/8W
9 1 A-21653 BEARING, REAR
10 (1) A26631 COLLAR, BALL NUT STOP
11 1 D-22811 HOUSING, REAR BEARING, 316SS
12 1 740-P SCREW, SOCKET HD CAP #10-32 x 2 1/4 18-8 SS
13 1 1158-361-002 O-RING, BUNA-N/TEF COAT 6 ID 3/16 W
14 2 2949-18 RING, RETAINING EXTERNAL 1/2"
15 2 2362 A00875 KEY, EMO III
16 1 A-21955 SWITCH, MICRO
(37.0) 17 1 A-21956 ACTUATOR, MICRO SWITCH
(1.375) (9.2) (2.6) 18 4 2296B9 NUT, ELASTIC STOP 316 SS 1/4 - 20
19 1 B-22663 BRACKET, SENSOR
20 1 C-23234 COVER, EMO III
NOTE-5 21 1 A-21947 GEARMOTOR, DC BRUSHLESS
10 11 38 22 1 A-21926 INSERT, FEMALE PLUG, 16 PIN
NOTE-1 NOTE-2 21 26 24 23 1 B-22622 BRACKET, TERMINAL INSERT
17
24 1 B-18266 GASKET, TERMINAL MOUNTING, NEOPRENE C
36 7 1 2 4 12 5 6 46 7 8 9 45 3 16 19 29 27 37 40 23 25 18 22 30 25 1 C-23240 HOUSING, TERMINAL
26 1 A-21925 INSERT, MALE PLUG, 16 PIN
27 5 667-C3 SCREW, HEX HD 316 SS 1/4-20 x 5/8
NOTE-7 28 1 A-15460 GP1 COUPLING, ASSEMBLY FLEXIBLE
29 3 B-15087 GP1 STAND-OFF, MOTOR
LS-1 3/4" NPT 30 1 A-17536 TAG, WARNING
31 4 2847-C SCREW, SKT HD 18-8 SS #8-32 x 1/2
M-1 32 1 C-23249 PLATE, MOTOR MOUNTING
33 1 A-15540 GROMMET, WIRE (NOT SHOWN)
34 2 B-18267 STAND-OFF, TERMINAL INSERT BRACKET
35 6 667-C4 SCREW, HEX HD 316 SS 1/4-20 x 3/4
J1/P1 36 1 C-27141 HOUSING, FRONT LUBRICATED, ASSEMBLY
(.5) CONNECTOR
TO CONTROL 37 1 A-23112 CONNECTOR, PRESSURE TERMINAL
PANEL 38 2 1161-A1 SCREW, SKT HD SS #6-32 x 1/4
39 1 A-23615 GREASE, DIELECTRIC COMPOUND (5.3 oz TUBE)
42 43
40 1 A24032 TAG, IDENTIFICATION
41
13 27 15 28 31 32 29 15 34 20 35 44 14 35 42 1 1171B1 SCREW, PAN HD 18-8 SS #10-32 x 3/8 B
33 44 43 1 A15537 BEARING, SHAFT ASM DELRIN
NOTE-5 44 6 A15487 WASHER, SEAL
45 1 B22635 PLATE, RETAINER
46 REQ'D A15712 WASHER, SHIM

05/01/12 05/01/12
24 P08107 - REMOVE A29221 FROM BOM SFN SRG
02-10-05 02-10-05
23 ITEM 10 WAS A21958 PER PCR# P06614 JES JAS
03/18/02 03/18/02
22 REVISION PER ECR# E10714 JAT GWF
03/01/02 03/01/02
21 ADDED CSA TAG PER ECR# E10670 JAT GWF
02/20/01 02/20/01
20 REVISED PER ECR# E10062 (OVERALL REFERENCE DIM WAS 36.9) JES GWF
02/15/00 02/15/00
19 REVISED PER P06367 (REMOVED WIRING DIAGRAM, SEE B24222 FOR WIRING)
NOTES: JES GWF
02-21-94 10/16/96
18 CHANGED GREASE NOTE PER P4119 GWF
1-GREASE BALLSCREW AND SEALS WITH A21698.
KMR

DATE DATE APVD

REVISION DESCRIPTION
2-SHIM WITH A15712 TO ALLOW BALLSCREW RETURNS TO CLEAR TARGET PIN & BARREL KEY.
BY CHECK BY BY
THIS DRAWING IS CONFIDENTIAL IN DESIGN,
A
3-WARNING TAG TO BE LOCATED ON TOP TERMINAL HOUSING. DETAIL AND INVENTION. IT IS THE PROPERTY
OF KADANT AES AND MAY BE USED SOLELY FOR

4-ASSEMBLE ALL SCREWED PARTS WITH LOCTITE 242. WORK CONTRACTED, OR BY EXPRESS PERMISSION.
ALL RIGHTS OF REPRODUCTION ARE RESERVED. A E S
5-ASSEMBLE COVER SCREWS AND COLLAR STOP WITH LOCTITE 680.
QUEENSBURY, NY

6-APPLY A23615 DIELECTRIC COMPOUND TO JI PLUG, AFTER WIRING. OSCILLATOR, ASM EMO III
7-FILL NOSE ASSEMBLY AT LUBE PORT USING A25552. 12" BODY STROKE
8-REFER TO B24222 (GEARMOTOR, ASSEMBLY EMO III) FOR PROPER WIRING. SH 1 OF 1

D22783
BREAK ALL CORNERS TO
.015R MAX., UNLESS
DO NOT SCALE THIS DRAWING OTHERWISE SPECIFIED

8 7 6
*** Electronic Copy of Original Generated On *** Jul 11, 2014 7:01 5AM 4 3 2 1