Grade Level: Grade 9-12

Subject: TLE (Carpentry NC II- 640 Hours)

Week of the Most Essential Learning competencies Lesson LR Link (if available Assessment
Quarter/ Grading Exemplar/ develope online) (provide a
Period Learning r link if online)
resources
available
PREPARE / STAKEOUT BUILDING LINES (BL)

TLE_IACP9-12BL-Ia- LO 1. Prepare tools, equipment and materials for staking out

h-1 building lines
1.1 Identify tools and materials for staking out building lines
Week 1-8 1.2 Prepare tools and materials for staking out building lines
1.3 Select appropriate Personal Protective Equipment (PPE)

TLE_IACP9-12BL-Ii- LO 2. Stake out and set batter boards

IIb-2 2.1 Set out stakes from pre-determined building lines
2.2 Measure, lay out and cut batter board according to
Week 9-10 specifications
2.3 Set stakes at 0.75-1.00 meter away from the pre-
Week 1-2 determined building lines
2.4 Secure batter boards with tolerance for dimensions at +/- 5
mm, and levelness of +/- 3 mm
2.5 Use PPE according to job requirements

TLE_IACP9-12BL-IIc- LO 3. Fix building lines

h-3 3.1 Square building lines with end tolerance of +/- 3 mm
3.2 Measure and set building lines
 Week of the Most Essential Learning competencies Lesson LR Link (if available Assessment
Quarter/ Grading Exemplar/ develope online) (provide a
Period Learning r link if online)
resources
available
Week 3-8 Use PPE according to job requirements
Lesson 2 : FABRICATE FORMWORKS (FW)
TLE_IACP9-12FW- LO 1. Prepare tools, equipment and materials for fabricating
IIi-IIId-1 formworks according to job requirements
1.1 Identify tools and materials for fabricating formworks
Week 9-10 1.2 Prepare tools and materials for fabricating formworks
1.3 Select appropriate PPE
Week 1-4

TLE_IACP9-12FW- LO 2. Lay-out and cut to dimension of form sheathing and

IIIe-j-2 stiffeners
2.1 Lay out form sheathing and stiffeners with tolerances of +3
Week 5-10 mm for all measurements and for squareness
2.2 Mark form sheathing and stiffeners according to job
requirements
2.3 Cut form sheathing and stiffeners according to dimension
Use appropriate PPE
TLE_IACP9-12FW- LO 3. Assemble form panels
IVa-j-3 3.1 Lay out form panels and stiffeners for pre-assembly
3.2 Pre-assemble form panels and stiffeners
Week 1-10 3.3 Check form panels and stiffeners for squareness according
to job requirements
3.4 Assemble form panels and stiffeners
3.5 Use appropriate PPE
 Week of the Most Essential Learning competencies Lesson LR Link (if available Assessment
Quarter/ Grading Exemplar/ develope online) (provide a
Period Learning r link if online)
resources
available
INSTALL FORMWORKS COMPONENTS (IF)
TLE_IACP9-12IF-Ia- LO 1. Prepare tools and materials for installing formworks
j-1 components/form panels
1.1 Identify tools, equipment and materials for job
Week 1-10 requirements
1.2 Prepare tools, equipment and materials job requirements
Select appropriate PPE
TLE_IACP9-12IF-IIa- LO 2. Lay-out/assemble scaffolds and braces
IVj-2 2.1 Prepare work areas for safe laying out and assembling of
scaffolds and braces
nd
Week 1-10 (2 ) 2.2 Assemble scaffolds and braces safely and securely:
2.2.1 free of interference
Week 1-10 (3rd) 2.2.2 properly balanced
2.3 Secure connectors, locks and screws
th
Week 1-10 (4 ) Select appropriate PPE

LO 3. Set/fix formworks components/form panels

TLE_IACP9-12IF-IIa- 3.1 Lay out formworks components/form panels with tolerance
IVj-3 of +3 mm for measurement, alignment, levelness and
plumbness
Week 1-10 (2nd) 3.2 Set/fix formworks/form panel according to required job
3.3 Install braces to support the formworks
Week 1-10 (3rd) 3.4 Apply form oil to the formworks
3.5 Re-check formworks components/form panels for
 Week of the Most Essential Learning competencies Lesson LR Link (if available Assessment
Quarter/ Grading Exemplar/ develope online) (provide a
Period Learning r link if online)
resources
available
Week 1-10 (4th) squareness, levelness and plumbness
3.6 Use appropriate PPE

PERSONAL ENTREPRENEURIAL COMPETENCIES (PeCS)

TLE_PECS9-12-I0-1 LO 1. Develop and strengthen personal competencies and skills
(PeCS) needed in carpentry
Week 0 Create a plan of action that ensures success of his/her
business/career choice
ENVIRONMENT AND MARKET (EM)

TLE_EM9-12-I0-II0- LO 1. Develop a product/ service in Carpentry

1 1.1 Identify what is of “Value” to the customer
1.2 Identify the customer
Week 0 1.3 Explain what makes a product unique and competitive
1.4 Apply creative and innovative techniques to develop
marketable product
1.5 Employ a Unique Selling Proposition (USP) to the
product/service

TLE_EM9-12-III0-2 LO 2. Select a business idea based on the criteria and

techniques set
Week 0 2.1 Enumerate various criteria and steps in selecting a business
idea
2.2 Apply the criteria/steps in selecting a viable business idea
2.3 Determine a business idea based on the criteria/techniques
set
 Week of the Most Essential Learning competencies Lesson LR Link (if available Assessment
Quarter/ Grading Exemplar/ develope online) (provide a
Period Learning r link if online)
resources
available

TLE_EM9-12-IV0-3 LO 3. Develop a brand for the product

1.1 Identify the benefits of having a good brand
Week 0 1.2 Enumerate recognizable brands in the town/province
1.3 Enumerate the criteria for developing a brand
1.4 Generate a clear appealing product brand