Scribd
Upload
105 views

AC6-How To Setup Client+AP Mode

This document provides instructions for setting up a Tenda AC6 router in Client+AP mode to function as a wireless repeater and provide internet access. The steps include: 1) Configuring the computer's IP address automatically; 2) Accessing the router's interface and skipping the initial setup; 3) Enabling wireless repeating, selecting the base station WiFi network, and saving the settings; 4) Rebooting the router and checking that client devices can now access the internet through the router in repeater mode.

Uploaded by

Kamran Khan
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
105 views

AC6-How To Setup Client+AP Mode

This document provides instructions for setting up a Tenda AC6 router in Client+AP mode to function as a wireless repeater and provide internet access. The steps include: 1) Configuring the computer's IP address automatically; 2) Accessing the router's interface and skipping the initial setup; 3) Enabling wireless repeating, selecting the base station WiFi network, and saving the settings; 4) Rebooting the router and checking that client devices can now access the internet through the router in repeater mode.

Uploaded by

Kamran Khan
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 10

How to setup Client+AP mode for AC6

This article will guide you how to setup WISP and the steps as
below.
Model Number：Tenda AC6 Question Classification：Internet Setting
Part 1: Configure an IP address for PC
Part 2: Configure Client+AP mode
Part 3: Check whether your computer can get internet

1. Click on “Network Connection Icon” on the system bar, then click on 
“Open Network and Sharing Center”.

2. Click on 
“Change
adapter settings”.

3. 
Ri
ght click on  “Local Area Connection”, then choose the 
“Properties” option.

4. Double cli
ck on 
“Internet
Protocol
Version
4(TCP/IPv4)”.
5.
Choose Obta
in an IP
address

automatically and Obtain DNS server address automatically and then


click OK.

 
6 Also click on OK on the first Local Area Connection Properties window.

Notice：If
you use the
router for the
first time, it
will appear
easy to use
interface in
the process
of you set
WISP, you
need to skip
these
interface,
login to the
Advanced
Settings interface to set WISP.
1. Open a browser ,then type http://tendawifi.com in the address bar, press
Enter. And login to the router interface, as follows：
2. Click the "Skip" in the page refer to the below screen shot:

3. Set the region or country, change router’s SSID and wireless password,
set a login password, and the login password should be 5~32 characters.
Click “Next”. Refer to the following setup steps:

4. “Setup completely, router is connecting the internet, please wait.”


Wait about 10 seconds, it will come out an interface.
5. Typing the login password you set before. Click “Login” and turn to the
setup page, reference is as bellow.
6. Entering the router's Settings interface ， click ” Wireless Settings
”，click ” Wireless Repeating ” as follows：
7. Enable “Wireless Repeating” ， choose mode as “Universal
Repeater” ， select “Base Station WiFi Name”, type password in “Base
Station WiFi Password” , click “Save” to save all the settings. Refer to
the following setup steps:

8. After click “Save”, please wait for router to reboot:


Notice ： To make it easier to manage, please set the LAN ip at the same
segment with gateway. For example, the gateway’s LAN ip is 192.168.2.1,
you should set the local device’s access ip as 192.168.2.x, x can be 2~254.

After reboot, connect router’s LAN1/LAN2/LAN3 ports, or reconnect wireless


signal of the router, try if you can surf the internet. Login the setting
interface of the router, can check the internet status, if the internet settings
shows “Connected!”, means setting successfully. You can check whether
you can get connected.

You might also like