IEWATT Micro Data Center

The IEM Series is the pre-fabricated, all-in-one

“plug-and-play” micro data center designed for
branch offices, small offices and any Non-IT space
where there isn’t the room, the time or the budget to
build a comms room.

➔
 IEWATT, a micro data center manufacturer that dedicated into offering the all-
in-one edge computing non-IT Infrastructure. Based on industry-leading
technology in data center infrastructure, we strive to making the enclosure of
edge computing super-coverage.

We streamline the edge micro data center to make it compact in appearance

and intelligent inside via the All-in-One topology both in physical design and
monitoring controlling

We help our customer free of exhausting delivery; time-consuming on-site

assembly and complex installation. Our vision is: to offer the all-in-one micro
data center to make INSTANT EDGE COMPUTING…

The problem you The Mission we The vision we look

confront support forward

Due to close to data user, With a professional team Edge means micro size
the edge computing data and advantage resource, and wide distribution,
center normally installed IEWATT combine and Instant means time and
beside or close to data optimize it, further more labor saving. All-in-one
user, in the meantime, the we’re concentrating on solution will save space
deployment are required one thing: and simplify all the process
to be rapid and simplified. from factory to end user,
The traditional pipe the ultimate goal is:
connection with cooling
will give a headache to
the customers: All-in-One Micro Data
Center
Space and complexity INSTANT EDGE

All-in-one On Premise Instant Delivery Plug-and-Play Instant Edge

 BENEFITS THAT WE DELIVER TO MICRO DATA CENTER

Compact Size Fast Efficiency Instant Edge

In office No raise floor Internal path for Instantly deliver

In warehouse No pipe welding cold/hot air
In plant No tangled wiring circulation Instantly deploy
…
High efficient and Instantly run
All you just need a Integrated; low PUE
cabinet footprint to prefabricated Instant Edge!
own your data topology make the Saving on bill of
center plug-and-play electricity
All-in-One Indoor Micro Data Center

IEM Series is prefabricated; out-of-box; all-in-one micro data center for branch offices, small
offices and any non-IT space where there isn’t the room, reducing the time or the budget to
build a comms room. The out-of-the-box solution allows for IT deployment wherever and
whenever it is needed, the well-functioned intelligent monitoring High mobility and Simple
installation via plug-and-play speed the edge computing like our name: INSTANT EDGE

All-In-One Hardware- All data center critical infras prefabricated into one cabinet

All-In-One Software- One SNMP-based DCIM integrate all In-rack facilities. .

Top cooling with Rack cooling Side cooling with

integrated condenser With split condenser integrated/split condenser

ONE CABINET ONE DATA CENTER

Precision cooling Temperature Sensor

UPS+Battery Humidity sensor

Power distribution Smoke sensor

PDU Monitoring host

Access control Fire suppression

All-in-One Rack Mounted cooling Micro Data Center

Cabinet
42/45U Close Cabinet

IP55 Degree

21-time bending sheet metal

DCIM

10’’ Touch screen with “0U” host

SNMP and Wifi Availability

All-in-One: All facility inside this
MDC are remotely and locally
controllable

Intelligent Locker
IP55 degree

3-in-one:biometric;card;Pind
Integrated into monitoring for
remote or local administration

Smart Power Distribution

N+1/2N dual bus configuration
With smart control core for
easy monitoring and detection
SNMP/Modbus communicative

Lithum Battery UPS System

1~10K On-line double
conversion
Lithium battery pack for longer
backup time and less space
taken

Thermal Management
3.9~12KW precise thermal
controlling cooling
EC fan and inverter
compressor
 All-in-One Rack Mounted cooling Micro Data Center
Data Specifications
Model IEM03R IEM05R IEM7R

Type Split with outdoor unit

Available Space for IT
30U 30U 27U
(Default configuration)

Default N Default N Default N

Cooling and power Redundancy
N+1 optional N+1 optional N+1 optional

Cabinet type 42U 600/800mm(45U optional)

W*D*H=600/800mm*1200mm*2000m(42U Rack)
Dimension
800mm*1200mm*2200mm(45U Rack)
IP Degree IP55
Power Section
220V~230/50Hz/1Ph
Input Voltage
208-240V/60Hz/2Ph

32/63/80A 2P 50/60HZ Input capacity optional

Optional N+1/2N Dual bus configuration
Intelligent Power Distribution Dual Bus for power redundancy
Independent DC source for sensors
SNMP/Modbus communicable

Rack Mounted Rack Mounted Rack Mounted

Defaulted UPS configuration
6KVA/6KW 10KVA/10KW 10KVA/10KW
Battery Type Lithium/Lead Acid

Monitoring and branch controlling function optional

8/16/24 outlets ;horizonal or Vertical installation;16/32A optional
Intelligent PDU Outlet electrical isolation protection
Sensor port for monitoring expansion in each rack

DCIM
UPS; Power distribution; Coolling; Sensors; Access control;
Monitoring Items
All subsystems of micro data center are integrated
"0U“ space taken; SNMP avilable；RS485/232 serial ports expansion;
Monitoring Host CANBUS for expansion
All ports insulatation for protection and less interference
Remote Control and Management Via SNMP Via SNMP Via SNMP
Wireless Connection(Wifi) Optional Optional Optional
Centralized Management Optional Optional Optional
Cooling Section
Cooliing Capacity(KW) 3.9 5 7.5

25kg 30kg 43kg

Dimension and Weight
W*D*H:442*799*218mm(5U) W*D*H:442*894*218mm(5U) W*D*H:440*950*352mm(8
U)
Sensible Capacity(KW) 5.6 7.6 10
Air Volumn(m³/s) 700 1100 1600
Heating Capacity (KW) 1 1 2

Humidification Capacity(kg/h) 1 1 1.5

All-in-One Top Mounted cooling Micro Data Center

Thermal Management
2.5~5.5KW Integrated
Precision cooling
Self-contained without
outdoor condenser

DCIM

10’’ Touch screen with “0U” host

SNMP and Wifi Availability

All-in-One: All facility inside this
MDC are remotely and locally
controllable

Intelligent Access control

IP55 degree

3-in-one:biometric;card;Pind
Integrated into monitoring for
remote or local administration

Smart Power Distribution

N+1/2N dual bus configuration
With smart control core for
easy monitoring and detection
SNMP/Modbus communicative

Lithum Battery UPS System

1~10K On-line double
conversion
Lithium battery pack for longer
backup time and less space
taken
 All-in-One Top Mounted cooling Micro Data Center

Data Specifications
Model IEM02T IEM03T IEM06T
Type Self-Contained without outdoor unit
Available Space for IT
17U 26U 26U
(Default configuration)
Cooling and power Redundancy N N N
24U Height 33U Height 33U Height
Cabinet type
600mm*1200mm*33U) 600mm*1200mm*42U 600mm*1200mm*45U
Dimension(W*D*H)
24U Rack +9U cooling 33U Rack +9U cooling 33U Rack +12U cooling

IP Degree IP50

Power Section
220V~230/50Hz/1Ph
Input Voltage
208-240V/60Hz/2Ph
32/63/80A 2P 50/60HZ Input capacity optional
Optional N+1/2N Dual bus configuration
Intelligent Power Distribution Dual Bus for power redundancy
Independent DC source for sensors
SNMP/Modbus communicable
Rack Mounted Rack Mounted Rack Mounted
Defaulted UPS configuration
3KVA/3KW 6KVA/6KW 10KVA/10KW
Battery Type Lithum/Lead Acid Lithum/Lead Acid Lithum/Lead Acid

Monitoring and branch controlling function optional

8/16/24 outlets ;horizonal or Vertical installation;16/32A optional
Intelligent PDU Outlet electrical isolation protection
Sensor port for monitoring expansion in each rack

DCIM
UPS;Power distribution;Coolling; Sensors; Access contrl;
Monitoring Items
All subsystems of micro data center are integrated
"0U“ space taken; SNMP avilable；RS485/232 serial ports expansion; CANBUS for
Monitoring Host expansion
All ports insulatation for protection and less interference
Remote Control and Management Via SNMP Via SNMP Via SNMP
Wireless Connection(Wifi) Optional Optional Optional
Centralized Management Optional Optional Optional
Cooling Section
Cooliing Capacity(KW) 2.5 3.5 5.5
Sensible Capacity(KW) 2.5 3.5 5.5
Air Volumn(m³/s) 500 600 900
Mounted Type Top Mounted without outdoor unit
All-in-One Side Mounted cooling Micro Data Center

Cabinet
42/45U Close Cabinet

IP55 Degree

21-time bending sheet metal

DCIM

10’’ Touch screen with “0U” host

SNMP and Wifi Availability

All-in-One: All facility inside this
MDC are remotely and locally
controllable

Intelligent Locker
IP55 degree

3-in-one:biometric;card;Pind
Integrated into monitoring for
remote or local administration
Side cooling without outdoor condenser
Smart Power Distribution
N+1/2N dual bus configuration
With smart control core for
easy monitoring and detection
SNMP/Modbus communicative

Lithum Battery UPS System

1~10K On-line double
conversion
Lithium battery pack for longer
backup time and less space
taken

Thermal Management

With both split and the self-

containment cooling solution
for different scenarios

Side cooling with split outdoor condenser

All-in-One Side Mounted cooling Micro Data Center

Specifications
Model IEM06S IEM07S IEM10S Big capacity above 10KW

Type Self-contained type without outdoor unit Split with outdoor unit
Available Space for IT
35U 35U 35U Customization
(Default configuration)

Default N Default N Default N Default N

Cooling and power Redundancy
N+1 optional N+1 optional N+1 optional N+1 optional

Cabinet type 42U 600/800mm(45U optional)

Dimension W*D*H=900/1100mm*1200mm*2000m

IP Degree IP55

Power Section

220V~230/50Hz/1Ph 380~415/50Hz/3Ph
Input Voltage
208-240V/60Hz/2Ph 208-240V/60Hz/3Ph

32/63/80A 2P 50/60HZ Input capacity optional

Optional N+1/2N Dual bus configuration
Intelligent Power Distribution Dual Bus for power redundancy Bigger capacity is customizable
Independent DC source for sensors
SNMP/Modbus communicable
Rack Mounted Rack Mounted Rack Mounted UPS optional for big capacity
Defaulted UPS configuration
6KVA/6KW 10KVA/10KW 10KVA/10KW max to 40KVA/unit
Battery Type Lithium/Lead Acid
Monitoring and branch controlling function optional
8/16/24 outlets ;horizonal or Vertical installation;16/32A optional
Intelligent PDU Outlet electrical isolation protection
Sensor port for monitoring expansion in each rack

DCIM
UPS; Power distribution; Coolling; Sensors; Access contrl;
Monitoring Items
All subsystems of micro data center are integrated
"0U“ space taken; SNMP avilable；RS485/232 serial ports expansion; CANBUS for
Monitoring Host expansion
All ports isulatation for protection and less interference
Remote Control and Management Via SNMP Via SNMP Via SNMP Via SNMP
Wireless Connection(Wifi) Optional Optional Optional Optional
Centralized Management Optional Optional Optional Optional
Cooling Section
Cooliing Capacity(KW) 5.6 7.6 10 15/17/21/25/30KW optional
Sensible Capacity(KW) 5.6 7.6 10 15/17/21/25/30KW optional
Air Volumn(m³/s) 2000 2250 2400 Based on capacity
Heating Capacity (KW) 3
Humidification Capacity
Optional
(kg/h)
IERow-X+Y Rack Combo Solution

IEROW:FORMULATE THE MICRO DATA CENTER

X=Cabinet Qty Y=Cooling Qty

Micro Data Center=X+Y

The IERow Series solution is a rapidly scalable one based on our All-in-one
Micro data center product, with the modular subsystem and the powerful DCIM
platform, this solution is totally born for the customization. We want to
formulate the single row solution free for every customer’s tailored requirement:
You finish the formula, we prefabricate!

Rack cooling type Side cooling type

IERow X+Y Series Single Row Micro Data Center

Data Specifications
Model IERow-X+Y

Cooling Type Rack mounted or Side Mounted DX Type Split with outdoor unit
Available Space for IT
The Available space = X*42U — the space taken by UPS and power distribution
(Default configuration)

Cooling and power Redundancy N/N+1/2N

Cabinet type
42U 600/800mm
Dimension Customization based on combination

IP Degree IP55

Power Section

220V~230/50Hz/1Ph 380~415/50Hz/3Ph
Input Voltage
208-240V/60Hz/2Ph 208-240V/60Hz/3Ph
32/63/80A 2P 50/60HZ Input capacity optional
100/125A 3P 50/60HZ
Optional N+1/2N Dual bus configuration
Intelligent Power Distribution
Dual Bus for power redundancy
Independent DC source for sensors
SNMP/Modbus communicable

UPS configuration Customization based on

Battery Type Lithium/Lead Acid

Monitoring and branch controlling function optional
8/16/24 outlets ;horizonal or Vertical installation;16/32A optional
Intelligent PDU Outlet electrical isolation protection
Sensor port for monitoring expansion in each rack

DCIM
UPS; Power distribution; Coolling; Sensors; Access contrl;
Monitoring Items
All subsystems of micro data center are integrated
"0U“ space taken; SNMP avilable；RS485/232 serial ports expansion; CANBUS for
Monitoring Host expansion
All ports isulatation for protection and less interference
Remote Control and Management Via SNMP Via SNMP Via SNMP Via SNMP
Wireless Connection(Wifi) Optional Optional Optional Optional
Centralized Management Optional Optional Optional Optional
Cooling Section
Cooliing Capacity(KW) Y*single unit capacity
Sensible Capacity(KW) Y*single unit capacity
Air Volumn(m³/s) Y*single unit capacity
 IEWATT TECHNOLOGY Co., Limited

Contact

Web: http://www.iewatt.com

For English : [email protected]

For Español：[email protected]

LOCATION:

HONGKONG HQ:

UNIT 04,7/F BRIGHT WAY TOWER

NO33 MONG KOK RD KL.HONGKONG.

FACTORY ADDRESS:
No.2 DaXing RD
Bao'An, Shenzhen 518008.CHINA