Scribd
Upload
50 views

CW Keyer and Cwtype Setup

1. The document provides instructions for setting up router ports for radio control, CW and PTT signals, and WinKey, and saving the settings. 2. It also gives steps for configuring the CWtype software to use a COM port for PTT on RTS and CW keying on DTR. 3. The key points are to assign consistent port numbers for each function and save the router and CWtype settings configurations.

Uploaded by

Francisco J Rojas G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views

CW Keyer and Cwtype Setup

1. The document provides instructions for setting up router ports for radio control, CW and PTT signals, and WinKey, and saving the settings. 2. It also gives steps for configuring the CWtype software to use a COM port for PTT on RTS and CW keying on DTR. 3. The key points are to assign consistent port numbers for each function and save the router and CWtype settings configurations.

Uploaded by

Francisco J Rojas G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

CW KEYER and CWtype setup

Router setup:
Note: The absolute port numbers do not matter. The key is consistency - the same port number must
be used for a specific function every time it is used.

1. Assign the radio control virtual COM port (used by the logging program).

2. Assign a port for CW and PTT. If the logging or digital program is using PTT, use 2nd PTT.

3. Assign a port for WinKey. Note: Although CWtype will not use WinKey its output can operate
in parallel with WinKey allowing WinKey to be used for manual operation.

4. Save settings to a preset by selecting menu Preset | Save as. Choose a position and name
it CWtype.
CWtype setup:

1. Click Setup | Interface

2. Select Key/PTT port type: COM-Port (via Windows API)

3. Set PTT: RTS

4. Set Key: DTR (CW output)


CW KEYER and CWtype setup
Router setup:
Note: The absolute port numbers do not matter. The key is consistency - the same port number must
be used for a specific function every time it is used.

1. Assign the radio control virtual COM port (used by the logging program).

2. Assign a port for CW and PTT. If the logging or digital program is using PTT, use 2nd PTT.

3. Assign a port for WinKey. Note: Although CWtype will not use WinKey its output can operate
in parallel with WinKey allowing WinKey to be used for manual operation.

4. Save settings to a preset by selecting menu Preset | Save as. Choose a position and name
it CWtype.
CWtype setup:

1. Click Setup | Interface

2. Select Key/PTT port type: COM-Port (via Windows API)

3. Set PTT: RTS

4. Set Key: DTR (CW output)


CW KEYER and CWtype setup
Router setup:
Note: The absolute port numbers do not matter. The key is consistency - the same port number must
be used for a specific function every time it is used.

1. Assign the radio control virtual COM port (used by the logging program).

2. Assign a port for CW and PTT. If the logging or digital program is using PTT, use 2nd PTT.

3. Assign a port for WinKey. Note: Although CWtype will not use WinKey its output can operate
in parallel with WinKey allowing WinKey to be used for manual operation.

4. Save settings to a preset by selecting menu Preset | Save as. Choose a position and name
it CWtype.
CWtype setup:

1. Click Setup | Interface

2. Select Key/PTT port type: COM-Port (via Windows API)

3. Set PTT: RTS

4. Set Key: DTR (CW output)


CW KEYER and CWtype setup
Router setup:
Note: The absolute port numbers do not matter. The key is consistency - the same port number must
be used for a specific function every time it is used.

1. Assign the radio control virtual COM port (used by the logging program).

2. Assign a port for CW and PTT. If the logging or digital program is using PTT, use 2nd PTT.

3. Assign a port for WinKey. Note: Although CWtype will not use WinKey its output can operate
in parallel with WinKey allowing WinKey to be used for manual operation.

4. Save settings to a preset by selecting menu Preset | Save as. Choose a position and name
it CWtype.
CWtype setup:

1. Click Setup | Interface

2. Select Key/PTT port type: COM-Port (via Windows API)

3. Set PTT: RTS

4. Set Key: DTR (CW output)


CW KEYER and CWtype setup
Router setup:
Note: The absolute port numbers do not matter. The key is consistency - the same port number must
be used for a specific function every time it is used.

1. Assign the radio control virtual COM port (used by the logging program).

2. Assign a port for CW and PTT. If the logging or digital program is using PTT, use 2nd PTT.

3. Assign a port for WinKey. Note: Although CWtype will not use WinKey its output can operate
in parallel with WinKey allowing WinKey to be used for manual operation.

4. Save settings to a preset by selecting menu Preset | Save as. Choose a position and name
it CWtype.
CWtype setup:

1. Click Setup | Interface

2. Select Key/PTT port type: COM-Port (via Windows API)

3. Set PTT: RTS

4. Set Key: DTR (CW output)


CW KEYER and CWtype setup
Router setup:
Note: The absolute port numbers do not matter. The key is consistency - the same port number must
be used for a specific function every time it is used.

1. Assign the radio control virtual COM port (used by the logging program).

2. Assign a port for CW and PTT. If the logging or digital program is using PTT, use 2nd PTT.

3. Assign a port for WinKey. Note: Although CWtype will not use WinKey its output can operate
in parallel with WinKey allowing WinKey to be used for manual operation.

4. Save settings to a preset by selecting menu Preset | Save as. Choose a position and name
it CWtype.
CWtype setup:

1. Click Setup | Interface

2. Select Key/PTT port type: COM-Port (via Windows API)

3. Set PTT: RTS

4. Set Key: DTR (CW output)

You might also like