SB500UK5
www.eriez.com
Rugged Reliable Recovery
Eddy Current Separators or ECS utilise Features
powerful magnets to separate valuable non- • Range of magnetic designs to suit multiple applications from fine
ferrous metals such as aluminium, brass and materials to coarse and large scrap processing
copper from different waste types. • Designed for installation into new and existing recycling plants
• Simple to operate with many adjustable settings
ECS are often used in combination with other • Wide range of sizes from 300mm to 2000mm feed widths
magnetic separation equipment to provide
optimum non-ferrous downstream recovery
from shredders, granulators and crushers. Typical Applications
• Recovery of aluminium cans from MSW
• Removal of non-ferrous metal from recycled glass and plastic
• Collection of valuable copper from WEEE (Waste Electronic and
Electrical Equipment)
• Extraction of nails and screws from recycled wood and biofuel
• Separation of brass and aluminium from foundry sand
• Removal of non-ferrous metal from incineration bottom ash
Models / Magnet Designs
Eriez has over 20 years of experience in the design of Eddy Current Separators and has developed the
following 5 models to suit a full range of recycling applications.
Eriez Model Particle size (non- Application Examples
ferrous) for separation
PET Flake, Glass Cullet, IBA (Incineration Bottom Ash)
RevX-E ST22 3-15mm
WEEE (Waste Electrical and Electronic Equipment), uPVC Window
RevX-E ST2 10-45mm Frames, ASR (Automotive Shredder Residue)
Car Frag, Woodchip, MSW (Municipal Solid Waste),
RevX-E LT2 +35mm RDF (Refuse - Derived Fuel)
Dual frequency design capable of processing small and large fractions
RevX-E NG24 10-45mm & +45mm - Glass Cullet, Woodchip, RDF
High capacity design for 2000mm wide processing of fine material -
RevX-E NG32 3-15mm PET Flake, IBA
Can Separator for use in MSW type waste to recover whole
LC09 +75mm aluminium cans
Eddy Current Separator Modular MK I Frame Design - compact, easy
Systems installation
Eriez can also offer a range of dual metal separation modules The MK I features easy access pop panels for routine maintenance
capable of recovering ferrous (steel) & non-ferrous (aluminium) and central fork lifting points for manoeuvrability.
metals in one stand-alone machine.
Range of belt
thicknesses
Vibratory feeder available
Magnetic drum
separator
Adjustable splitter
distance and
Easy access pop- angle controls
ECS Non-ferrous panels for routine
metal separator maintenance
Stand-alone
framework
MK III Frame Design - Cantilever,
Rapid Belt Change
Available with a range of optional extras The MK III features a unique cantilever design which allows belt
changes in less than 30 minutes.
Adjustable splitter Self supporting
distance and cantilever frame for
Eddy Current Separator Service angle controls quick belt changes
without lifting gear
• Eriez carries a full stock of critical spares at their European
headquarters in the UK
• Service and support from time-served engineers
• Vast number of reference sites available across Europe
and the UK
Easy access pop-panels
for routine maintenance
Eriez Europe’s recycling test centre enables customers to EFFICIENT TESTING SERVICE
determine which combination of equipment is the best fit for
their waste processing needs. The centre is equipped with The centre uses samples provided by the customer to conduct
our full range of recycling machinery, including separation, feasibility tests with various equipment combinations,
vibratory feeding and metal detection equipment. It can handle based on a detailed analysis of the customer’s requirements.
bulk samples of any material, from coarse to very fine, and Performance tests are used to confirm the machinery and
complements our equally well-equipped laboratory and testing settings and make a profitability assessment. A concise report
facility. is produced indicating the expected quantities and grade of
recovered material as well as the most suitable equipment
configuration.
Manufacturing Affiliates in: Australia, Brazil, Canada, China, India, Japan, Mexico, South Africa, United Kingdom, USA
Eriez Magnetics Europe Limited
European Manufacturing, Design and Test Laboratory Headquarters
Bedwas House Industrial Estate Greenway, Bedwas Caerphilly, CF83 8YG, UK
www.eriez.com
T: +44 (0)29 2086 8501 | F: +44 (0)29 2085 1314 | E:
[email protected]
