Scope of Certificate Design, Features, Function, and all other

requirements of Floor drains

Applied standard(s)  ASME A112.6.3-2001: Floor and Trench Drains

 ASTM A48: Gray Iron Castings.
 ASTM A536: Ductile Iron Castings.

This is to confirm that the Engineering Specifications of our Deep Sump Area
drain # FD-5060D series complies with ASME A112.6.3 standard.
The material used to manufacture body and bucket is Grey Cast Iron
according to ASTM-A48 class 25, and material used to manufacture hinged
grate is Ductile Iron according to ASTM A536 grade 70-50-5.

Arvin Bermudez Ageel Mubaraki

Technical Manager QC Manager
 Features  Deep Sump Area Drain, suitable with 4 & 6” pipe
connection.
 Bottom outlet.
 Deep Sump Body 300X300 mm with 309 mm height.
 No Hub (Coupling) Connection (4”& 6”).
 Sediment Bucket.
 Extra Heavy Duty Square Grate.

Materials  Body and bucket: Gray Cast Iron.

 Hinged Square grate: Ductile Iron.

Dimensions As per Drawing

Surface Finish  Cast iron parts: Epoxy Coating

 Ductile Iron Parts: Epoxy Coating
 1 2 3 4 5 6

A A

SLOPE TO DRAIN
TOP OF SLAB

B B

FD-5060D BODY

GRATE (Extra Heavy Duty)

SEDIMENT BUCKET

C C

COUPLING

DRAINAGE PIPE

Unless otherwise specified: All inf ormation

contained in this
All dimensions are in millimeter (mm) document is property of
Flo Dr a in a n d m a y n o t
D TO DOWN NAME DATE be reproduced in whole
part, without permission
SPOUT DRAWN Romel 27/10/14 o f F l o D r a i n.

CHECKED Karam 27/10/14 TITLE:

APPROVED Installation of FD-5060D
SCALE: N.T.S. SHT 1 of 1 DWG NO: A4
1 2 3 REF. DWG: FD-5060D.00 I-5060D Rev. 00
 Scope of Certificate Design, Features, Function, and all other
requirements of Floor drains

Applied standard(s)  ASME A112.6.3-2001: Floor and Trench Drains

 ASTM A48: Gray Iron Castings.
 ASTM A536: Ductile Iron Castings.

This is to confirm that the Engineering Specifications of our Deep Sump Area
drain with integral trap # FD-5060DH series complies with ASME A112.6.3
standard.
The material used to manufacture body, frame, and bucket is Grey Cast
Iron according to ASTM-A48 class 25, and material used to manufacture
hinged grate is Ductile Iron according to ASTM A536 grade 70-50-5.

Ageel Mubaraki
Arvin Bermudez
QC Manager
Technical Manager
 Features  Deep Sump Area Drain, suitable with 4 & 6” pipe
connection.
 Side outlet with integral trap.
 73 mm water seal.
 Deep Sump Body 300X300 mm with 346 mm height.
 No Hub (Coupling) Connection (4”& 6”).
 Sediment Bucket.
 Extra Heavy Duty Square Grate.
 Cleanout Plug

Materials  Body, frame, and bucket: Gray Cast Iron.

 Hinged Square grate: Ductile Iron.
 Cleanout Plug: PVC

Dimensions As per Drawing

Surface Finish  Cast iron parts: Epoxy Coating

 Ductile Iron Parts: Epoxy Coating
 1 2 3 4 5 6

A A

SLOPE TO DRAIN
TOP OF SLAB

B B

TOP FRAME

FD-5060DH BODY

GRATE (Extra Heavy Duty)

TO DOWN
SPOUT

C C
SEDIMENT BUCKET
DRAINAGE PIPE
CLEANOUT
PLUG
COUPLING

Unless otherwise specified: All inf ormation

contained in this
All dimensions are in millimeter (mm) document is property of
Flo Dr a in a n d m a y n o t
D NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 27/10/14 o f F l o D r a i n.

CHECKED Karam 27/10/14 TITLE:

APPROVED Installation of FD-5060DH
SCALE: N.T.S. SHT 1 of 1 DWG NO: A4
1 2 3 REF. DWG: FD-5060DH.00 I-5060DH Rev. 00
 Scope of Certificate Design, Features, Function, and all other
requirements of Floor drains

Applied standard(s)  ASME A112.6.3-2001: Floor and Trench Drains

 ASTM A48: Gray Iron Castings.
 ASTM A536: Ductile Iron Castings.

This is to confirm that the Engineering Specifications of our Parking & Area
drain # FD-5070RB series complies with ASME A112.6.3 standard.
The material used to manufacture body, clamp, frame, and bucket is Grey
Cast Iron according to ASTM-A48 class 25, and material used to
manufacture the round grate is Ductile Iron according to ASTM A536 grade
70-50-5.

Arvin Bermudez Ageel Mubaraki

Technical Manager QC Manager
 Features  Parking & Area Drain, suitable with 2, 3 & 4” pipe
connection.
 Bottom Outlet.
 Small Body with 9” (229 mm) flange dia.
 Inside Gasketed connection or No Hub (Coupling)
Connection (2”, 3”& 4”) as per DIN and ASTM pipe size
or Threaded connection.
 Seepage Holes for any seepage around the drain.
 Sediment Bucket.
 Extra Heavy Duty Adjustable Round Grate.
 Optional ½”primer trap connection.
 Bolts and Screws.

Materials  Body, clamp, frame, and bucket: Gray Cast Iron.

 Round grate: Ductile Iron.
 Bolts and Screws: Stainless Steel

Dimensions As per Drawing

Surface Finish  Cast iron parts: Epoxy Coating

 Ductile Iron Parts: Epoxy Coating
 1 2 3 4 5 6

A A
OPTION 1 OPTION 2
(as Floor Drain) (as Area Drain)
WATERPROOFING
MEMBRANE

SLOPE TO DRAIN
FINISHED FLOOR

SEEPAGE OPENING
nos. - Ø6 mm GRATE
(Extra Heavy Duty)
B B
TOP OF SLAB

SEDIMENT BUCKET

SEE DETAIL "B" FOR

ENLARGE VIEW FD-5070RB BODY

SEE DETAIL "A" FOR GASKET

ALTERNATIVE OPTION
C DRAINAGE PIPE C

TO DOWN
SPOUT

Unless otherwise specified: All inf ormation

contained in this
All dimensions are in millimeter (mm) document is property of
Flo Dr a in a n d m a y n o t
D NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 28/10/14 o f F l o D r a i n.

CHECKED Karam 28/10/14 TITLE:

APPROVED Installation of FD-5070RB
SCALE: N.T.S. SHT 1 of 2 DWG NO: A4
1 2 3 REF. DWG: FD-5070RB.00 I-5070RB Rev. 00
 1 2 3 4 5 6

A A

ADJUSTABLE
CLAMP FRAME
FD-5070RB BODY
B B
SEEPAGE
OPENING
SEEPAGE COUPLING
OPENING

DRAINAGE PIPE
WATERPROOFING
MEMBRANE

C C
FD-5070RB BODY

No Hub Outlet

Detail "B" Detail "A"

SCALE: N.T.S. SCALE: N.T.S.

Unless otherwise specified: All inf ormation

contained in this
All dimensions are in millimeter (mm) document is property of
Flo Dr a in a n d m a y n o t
D NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 28/10/14 o f F l o D r a i n.

CHECKED Karam 28/10/14 TITLE:

APPROVED Installation of FD-5070RB
SCALE: N.T.S. SHT 2 of 2 DWG NO: A4
1 2 3 REF. DWG: FD-5070RB.00 I-5070RB Rev. 00
 Scope of Certificate Design, Features, Function, and all other
requirements of Floor drains

Applied standard(s)  ASME A112.6.3-2001: Floor and Trench Drains

 ASTM A48: Gray Iron Castings.
 ASTM A536: Ductile Iron Castings.

This is to confirm that the Engineering Specifications of our Parking & Area
drain # FD-5070SB series complies with ASME A112.6.3 standard.
The material used to manufacture body, clamp, frame, and bucket is Grey
Cast Iron according to ASTM-A48 class 25, and material used to
manufacture the square grate is Ductile Iron according to ASTM A536 grade
70-50-5.

Arvin Bermudez Ageel Mubaraki

Technical Manager QC Manager
 Features  Parking & Area Drain, suitable with 2, 3 & 4” pipe
connection.
 Bottom Outlet.
 Small Body with 9” (229 mm) flange dia.
 Inside Gasketed connection or No Hub (Coupling)
Connection (2”, 3”& 4”) as per DIN and ASTM pipe size
or Threaded connection.
 Seepage Holes for any seepage around the drain.
 Sediment Bucket.
 Extra Heavy Duty Adjustable Square Grate.
 Optional ½”primer trap connection.
 Bolts and Screws.

Materials  Body, clamp, frame, and bucket: Gray Cast Iron.

 Square grate: Ductile Iron.
 Bolts and Screws: Stainless Steel

Dimensions As per Drawing

Surface Finish  Cast iron parts: Epoxy Coating

 Ductile Iron Parts: Epoxy Coating
 1 2 3 4 5 6

A OPTION 1 OPTION 2 A
(as Floor Drain) (as Area Drain)
WATERPROOFING
MEMBRANE
SLOPE TO DRAIN
FINISHED FLOOR

SEEPAGE OPENING
6 nos. - Ø6 mm GRATE
(Extra Heavy Duty)
B B
TOP OF SLAB

SEDIMENT BUCKET

SEE DETAIL "B" FOR

ENLARGE VIEW FD-5070SB BODY

SEE DETAIL "A" FOR GASKET

ALTERNATIVE OPTION
DRAINAGE PIPE C
C

TO DOWN
SPOUT

Unless otherwise specified: All inf ormation

contained in this
All dimensions are in millimeter (mm) document is property of
Flo Dr a in a n d m a y n o t
D NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 01/11/14 o f F l o D r a i n.

CHECKED Karam 01/11/14 TITLE:

APPROVED Installation of FD-5070SB
SCALE: N.T.S. SHT 1 of 2 DWG NO: A4
1 2 3 REF. DWG: FD-5070SB.00 I-5070SB Rev. 00
 1 2 3 4 5 6

A A

ADJUSTABLE
CLAMP FRAME
FD-5070SB BODY
B B
SEEPAGE
OPENING
SEEPAGE COUPLING
OPENING

DRAINAGE PIPE
WATERPROOFING
MEMBRANE

C C
FD-5070SB BODY

No Hub Outlet

Detail "B" Detail "A"

SCALE: N.T.S. SCALE: N.T.S.

Unless otherwise specified: All inf ormation

contained in this
All dimensions are in millimeter (mm) document is property of
Flo Dr a in a n d m a y n o t
D NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 01/11/14 o f F l o D r a i n.

CHECKED Karam 01/11/14 TITLE:

APPROVED Installation of FD-5070SB
SCALE: N.T.S. SHT 2 of 2 DWG NO: A4
1 2 3 REF. DWG: FD-5070SB.00 I-5070SB Rev. 00
 FD-5070SR
Product Data Sheet

Item no. FD-5070SR Series (FD-5073SR & FD-5074SR) According to

ASME A 112.6.3

Features  Area drain suitable with 75 & 110 mm PVC pipe connection
 Body
 Square Grate
 Gasket for PVC connection

Materials  Body: Gray cast iron (Flake graphite cast iron)

 Square Grate: Gray cast iron (Flake graphite cast iron)
 Gasket: EPDM - Rubber

Dimensions As per drawing

Loading Heavy duty

Classification

Surface Finish Cast Iron parts: Epoxy coating

 1 2 3 4 5 6

A A
WATERPROOFING
MEMBRANE OPTION 1 OPTION 2
(as Floor Drain) (as Area Drain)
SLOPE TO DRAIN
FINISHED FLOOR

GRATE
(Extra Heavy Duty)
TOP OF SLAB

B B

FD-5070SR BODY

GASKET

DRAINAGE PIPE

C C

TO DOWN
SPOUT

Unless otherwise specified: All inf ormation

contained in this
All dimensions are in millimeter (mm) document is property of
Flo D r a i n a n d m a y n o t
D NAME DATE be reproduced in whole
part, without permission
DRAWN Javed 25/01/17 o f F l o D r a i n.

CHECKED -- -- TITLE:
APPROVED Installation of FD-5070 SR
SCALE: N.T.S. SHT 1 of 1 DWG NO: A4
1 2 3 REF. DWG: FD-5070 SR I-5070 SR Rev. 00
 Scope of Certificate Design, Features, Function, and all other
requirements of Floor drains

Applied standard(s)  ASME A112.6.3-2001: Floor and Trench Drains

 ASTM A48: Gray Iron Castings.
 ASTM A536: Ductile Iron Castings.

This is to confirm that the Engineering Specifications of our Parking & Area
drain # FD-5080RB series complies with ASME A112.6.3 standard.
The material used to manufacture body, clamp, and bucket is Grey Cast
Iron according to ASTM-A48 class 25, and material used to manufacture the
round grate is Ductile Iron according to ASTM A536 grade 70-50-5.

Arvin Bermudez Ageel Mubaraki

Technical Manager QC Manager
 Features  Parking & Area Drain, suitable with 3, 4 & 6” pipe
connection.
 Bottom Outlet.
 Large sump Body with 15” (381 mm) flange dia.
 Inside Gasketed connection or No Hub (Coupling)
Connection (3”, 4”& 6”) as per DIN and ASTM pipe size.
 Clamp (When used with water proofing system).
 Seepage Holes for any seepage around the drain
(When used with water proofing system).

 Sediment Bucket.
 Extra Heavy Duty Round Grate.
 Bolts and Screws.

Materials  Body, clamp, and bucket: Gray Cast Iron.

 Round grate: Ductile Iron.
 Bolts and Screws: Stainless Steel

Dimensions As per Drawing

Surface Finish  Cast iron parts: Epoxy Coating

 Ductile Iron Parts: Epoxy Coating
 1 2 3 4 5 6

OPTION 1 OPTION 2
A A
(as Floor Drain) (as Area Drain)

WATERPROOFING
GRATE
MEMBRANE SEEPAGE (Extra Heavy Duty)
OPENING
SLOPE TO DRAIN
4 nos. FINISHED FLOOR

TOP OF SLAB

B B

FD-5080RB BODY
SEE DETAIL "B" FOR
ENLARGE VIEW
SEDIMENT BUCKET

SEE DETAIL "A" FOR GASKET

ALTERNATIVE OPTION

DRAINAGE PIPE

C C

Unless otherwise specified: All inf ormation

TO DOWN All dimensions are in millimeter (mm)
contained in this
document is property of
SPOUT Flo Dr a in a n d m a y n o t
D NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 29/10/14 o f F l o D r a i n.

CHECKED Karam 29/10/14 TITLE:

APPROVED Installation of FD-5080RB
SCALE: N.T.S. SHT 1 of 2 DWG NO: A4
1 2 3 REF. DWG: FD-5080RB.00 I-5080RB Rev. 00
 1 2 3 4 5 6

A A

CLAMP
FD-5080RB BODY

B B

SEEPAGE COUPLING
OPENING

WATERPROOFING
DRAINAGE PIPE
MEMBRANE

FD-5080RB BODY

C C
No Hub Outlet

Detail "B" Detail "A"

SCALE: N.T.S. SCALE: N.T.S.

Unless otherwise specified: All inf ormation

contained in this
All dimensions are in millimeter (mm) document is property of
Flo Dr a in a n d m a y n o t
D NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 29/10/14 o f F l o D r a i n.

CHECKED Karam 29/10/14 TITLE:

APPROVED Installation of FD-5080RB
SCALE: N.T.S. SHT 2 of 2 DWG NO: A4
1 2 3 REF. DWG: FD-5080RB.00 I-5080RB Rev. 00
 Scope of Certificate Design, Features, Function, and all other
requirements of Floor drains

Applied standard(s)  ASME A112.6.3-2001: Floor and Trench Drains

 ASTM A48: Gray Iron Castings.
 ASTM A536: Ductile Iron Castings.

This is to confirm that the Engineering Specifications of our Indirect waste

drain # FD-5090G series complies with ASME A112.6.3 standard.
The material used to manufacture body and dome secondary strainer is
Grey Cast Iron according to ASTM-A48 class 25, and material used to
manufacture grate is Ductile Iron according to ASTM A536 grade 70-50-5.

Arvin Bermudez Ageel Mubaraki

Technical Manager QC Manager
 Features  Indirect waste Drain, suitable with 3 & 4” pipe
connection.
 Bottom outlet.
 Inside gasket connection (3”& 4”).
 Dome secondary strainer.
 Extra Heavy Duty Square Grate.

Materials  Body and dome: Gray Cast Iron.

 Square grate: Ductile Iron.
 Screws: Stainless Steel

Dimensions As per Drawing

Surface Finish  Cast iron parts: Epoxy Coating

 Ductile Iron Parts: Epoxy Coating
 1 2 3 4 5 6

A A

FINISHED FLOOR TOP OF SLAB

B B
GRATE (Extra Heavy Duty)

FD-5090G BODY
GASKET

DOME (Secondary
Strainer)

DRAINAGE PIPE
C C

TO DOWN
SPOUT All inf ormation
Unless otherwise specified:
contained in this
All dimensions are in millimeter (mm) document is property of
Flo Dr a in a n d m a y n o t
D NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 29/10/14 o f F l o D r a i n.

CHECKED Karam 29/10/14 TITLE:

APPROVED Installation of FD-5090G
SCALE: N.T.S. SHT 1 of 1 DWG NO: A4
1 2 3 REF. DWG: FD-5090G.00 I-5090G Rev. 00
 Features  Parking & Area Drain, suitable with 2, 3, 4 & 6” pipe
connection.
 Bottom Outlet.
 Deep sump Body with 12” (305 mm) flange dia.
 Inside Gasketed connection or No Hub (Coupling)
Connection (2”, 3”, 4”& 6”) as per DIN and ASTM pipe
size.
 Clamp with adjustable frame.
 Sediment Bucket.
 Seepage Holes for any seepage around the drain
(When used with water proofing system).

 Extra Heavy Duty Round Grate.

 Bolts and Screws.

Materials  Body, clamp, bucket, and frame: Gray Cast Iron.

 Round grate: Ductile Iron.
 Bolts and Screws: Stainless Steel

Dimensions As per Drawing

Surface Finish  Cast iron parts: Epoxy Coating

 Ductile Iron Parts: Epoxy Coating
 Scope of Certificate Design, Features, Function, and all other
requirements of Floor drains

Applied standard(s)  ASME A112.6.3-2001: Floor and Trench Drains

 ASTM A48: Gray Iron Castings.
 ASTM A536: Ductile Iron Castings.

This is to confirm that the Engineering Specifications of our Parking & Area
drain # FD-5110RB series complies with ASME A112.6.3 standard.
The material used to manufacture body, clamp, bucket, and frame is Grey
Cast Iron according to ASTM-A48 class 25, and material used to
manufacture the round grate is Ductile Iron according to ASTM A536 grade
70-50-5.

Arvin Bermudez Ageel Mubaraki

Technical Manager QC Manager
 1 2 3 4 5 6

OPTION 1 OPTION 2
(as Floor Drain) (as Area Drain)
A WATERPROOFING A
MEMBRANE
SLOPE TO DRAIN
FINISHED FLOOR

SEEPAGE OPENING
6 nos. - Ø6 mm

TOP OF SLAB GRATE

(Extra Heavy Duty)
B B
SEDIMENT BUCKET
SEE DETAIL "B" FOR
ENLARGE VIEW

FD-5110RB BODY

COUPLING

DRAINAGE PIPE

C C

CLAMP

SEEPAGE TO DOWN
OPENING SPOUT

Detail "B"
SCALE: N.T.S.
Unless otherwise specified: All inf ormation
contained in this
All dimensions are in millimeter (mm) document is property of
WATERPROOFING Flo Dr a in a n d m a y n o t
D MEMBRANE NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 02/11/14 o f F l o D r a i n.
FD-5110RB BODY
CHECKED Karam 02/11/14 TITLE:
APPROVED Installation of FD-5110RB
SCALE: N.T.S. SHT 1 of 1 DWG NO: A4
1 2 3 REF. DWG: FD-5110RB.00 I-5110RB Rev. 00
 Features  Parking & Area Drain, suitable with 2, 3, 4 & 6” pipe
connection.
 Bottom Outlet.
 Deep sump Body with 12” (305 mm) flange dia.
 Inside Gasketed connection or No Hub (Coupling)
Connection (2”, 3”, 4”& 6”) as per DIN and ASTM pipe
size.
 Clamp with adjustable frame.
 Sediment Bucket.
 Seepage Holes for any seepage around the drain
(When used with water proofing system).

 Extra Heavy Duty Square Grate.

 Bolts and Screws.

Materials  Body, clamp, frame, and bucket: Gray Cast Iron.

 Square grate: Ductile Iron.
 Bolts and Screws: Stainless Steel

Dimensions As per Drawing

Surface Finish  Cast iron parts: Epoxy Coating

 Ductile Iron Parts: Epoxy Coating
 Scope of Certificate Design, Features, Function, and all other
requirements of Floor drains

Applied standard(s)  ASME A112.6.3-2001: Floor and Trench Drains

 ASTM A48: Gray Iron Castings.
 ASTM A536: Ductile Iron Castings.

This is to confirm that the Engineering Specifications of our Parking & Area
drain # FD-5110SB series complies with ASME A112.6.3 standard.
The material used to manufacture body, clamp, frame, and bucket is Grey
Cast Iron according to ASTM-A48 class 25, and material used to
manufacture the square grate is Ductile Iron according to ASTM A536 grade
70-50-5.

Arvin Bermudez Ageel Mubaraki

Technical Manager QC Manager
 1 2 3 4 5 6

OPTION 1 OPTION 2
(as Floor Drain) (as Area Drain)
A WATERPROOFING A
MEMBRANE
SLOPE TO DRAIN
FINISHED FLOOR

SEEPAGE OPENING
6 nos. - Ø6 mm

TOP OF SLAB GRATE

(Extra Heavy Duty)
B B
SEDIMENT BUCKET
SEE DETAIL "B" FOR
ENLARGE VIEW

FD-5110SB BODY

COUPLING

DRAINAGE PIPE

C C

CLAMP

SEEPAGE TO DOWN
OPENING SPOUT

Detail "B"
SCALE: N.T.S.
Unless otherwise specified: All inf ormation
contained in this
All dimensions are in millimeter (mm) document is property of
WATERPROOFING Flo Dr a in a n d m a y n o t
D MEMBRANE NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 02/11/14 o f F l o D r a i n.
FD-5110SB BODY
CHECKED Karam 02/11/14 TITLE:
APPROVED Installation of FD-5110SB
SCALE: N.T.S. SHT 1 of 1 DWG NO: A4
1 2 3 REF. DWG: FD-5110SB.00 I-5110SB Rev. 00
 Features  Area Drain, suitable with 4” pipe connection.
 Side Outlet.
 Large sump Body with 15” (381 mm) flange dia.
 No Hub (Coupling) Connection (4).
 Seepage Holes for any seepage around the drain
(When used with water proofing system).

 Heavy Duty Round Grate.

 Screws.

Materials  Body: Gray Cast Iron.

 Round grate: Ductile Iron.
 Screws: Stainless Steel

Dimensions As per Drawing

Surface Finish  Cast iron parts: Epoxy Coating

 Ductile Iron Parts: Epoxy Coating
 Scope of Certificate Design, Features, Function, and all other
requirements of Floor drains

Applied standard(s)  ASME A112.6.3-2001: Floor and Trench Drains

 ASTM A48: Gray Iron Castings.
 ASTM A536: Ductile Iron Castings.

This is to confirm that the Engineering Specifications of our Area Drain

# FD-5120H series complies with ASME A112.6.3 standard.
The material used to manufacture body is Grey Cast Iron according to
ASTM-A48 class 25, and material used to manufacture the round grate is
Ductile Iron according to ASTM A536 grade 70-50-5.

Arvin Bermudez Ageel Mubaraki

Technical Manager QC Manager
 1 2 3 4 5 6

A A

WATERPROOFING
MEMBRANE

FINISHED FLOOR FINISHED FLOOR

TOP OF SLAB TOP OF SLAB

B B

4 nos. - SEEPAGE
OPENING

TO DOWN GRATE
SPOUT (Extra Heavy Duty)

COUPLING FD-5120H BODY

C DRAINAGE PIPE C

Unless otherwise specified: All inf ormation

contained in this
All dimensions are in millimeter (mm) document is property of
Flo Dr a in a n d m a y n o t
D NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 27/10/14 o f F l o D r a i n.

CHECKED Karam 27/10/14 TITLE:

APPROVED Installation of FD-5120H
SCALE: N.T.S. SHT 1 of 1 DWG NO: A4
1 2 3 REF. DWG: FD-5120H.00 I-5120H Rev. 00
 Features  Area Drain, suitable with 4” pipe connection.
 Bottom Outlet.
 Large sump Body with 15” (381 mm) flange dia.
 No Hub (Coupling) Connection (4).
 Seepage Holes for any seepage around the drain
(When used with water proofing system).

 Heavy Duty Round Grate.

 Screws.

Materials  Body: Gray Cast Iron.

 Round grate: Ductile Iron.
 Screws: Stainless Steel

Dimensions As per Drawing

Surface Finish  Cast iron parts: Epoxy Coating

 Ductile Iron Parts: Epoxy Coating
 Scope of Certificate Design, Features, Function, and all other
requirements of Floor drains

Applied standard(s)  ASME A112.6.3-2001: Floor and Trench Drains

 ASTM A48: Gray Iron Castings.
 ASTM A536: Ductile Iron Castings.

This is to confirm that the Engineering Specifications of our Area Drain

# FD-5120V series complies with ASME A112.6.3 standard.
The material used to manufacture body is Grey Cast Iron according to
ASTM-A48 class 25, and material used to manufacture the round grate is
Ductile Iron according to ASTM A536 grade 70-50-5.

Arvin Bermudez Ageel Mubaraki

Technical Manager QC Manager
 1 2 3 4 5 6

A A
WATERPROOFING
MEMBRANE

FINISHED FLOOR FINISHED FLOOR

TOP OF SLAB TOP OF SLAB

GRATE 4 nos. - SEEPAGE

B (Extra Heavy Duty) OPENING B

FD-5120V BODY

COUPLING

C C
DRAINAGE PIPE

TO DOWN
SPOUT
Unless otherwise specified: All inf ormation
contained in this
All dimensions are in millimeter (mm) document is property of
Flo Dr a in a n d m a y n o t
D NAME DATE be reproduced in whole
part, without permission
DRAWN Romel 27/10/14 o f F l o D r a i n.

CHECKED Karam 27/10/14 TITLE:

APPROVED Installation of FD-5120V
SCALE: N.T.S. SHT 1 of 1 DWG NO: A4
1 2 3 REF. DWG: FD-5120V.00 I-5120V Rev. 00
 Features  Area Drain, suitable with 4 & 6” pipe connection.
 Bottom Outlet.
 Large sump Body.
 No Hub (Coupling) Connection (4).
 Frame with square top 750 X 750 mm.
 Extra Heavy Duty Square Grate.
 Sediment Bucket
 Bolts.

Materials  Body, frame, and bucket: Gray Cast Iron.

 Square grate: Ductile Iron.
 Bolts: Stainless Steel

Dimensions As per Drawing

Surface Finish  Cast iron parts: Epoxy Coating

 Ductile Iron Parts: Epoxy Coating
 Scope of Certificate Design, Features, Function, and all other
requirements of Floor drains

Applied standard(s)  ASME A112.6.3-2001: Floor and Trench Drains

 ASTM A48: Gray Iron Castings.
 ASTM A536: Ductile Iron Castings.

This is to confirm that the Engineering Specifications of our Area Drain

# FD-5130 series complies with ASME A112.6.3 standard.
The material used to manufacture body, frame, and bucket is Grey Cast
Iron according to ASTM-A48 class 25, and material used to manufacture the
square grate is Ductile Iron according to ASTM A536 grade 70-50-5.

Arvin Bermudez Ageel Mubaraki

Technical Manager QC Manager
 1 2 3 4 5 6

A A

SLOPE TO DRAIN
TOP OF SLAB

B B

GRATE
(Extra Heavy Duty)

FD-5130 BODY
COUPLING

SEDIMENT BUCKET
DRAINAGE PIPE

C C

TO DOWN
SPOUT

Unless otherwise specified: All inf ormation

contained in this
All dimensions are in millimeter (mm) document is property of
D NAME DATE FloDrain-logo_1.png Flo Dr a in a n d m a y n o t
be reproduced in whole
part, without permission
DRAWN Romel 27/10/14 o f F l o D r a i n.

CHECKED Karam 27/10/14 TITLE:

APPROVED Installation of FD-5130
SCALE: N.T.S. SHT 1 of 1 DWG NO: A4
1 2 3 REF. DWG: FD-5130.00 I-5130 Rev. 00