Scribd
Upload
162 views1 page

Metal Detectors: MDS Series Specs

This document summarizes metal detectors in the MDS Series designed for outdoor use. It provides the dimensions and specifications for four detector coil models: MDS 3065-SA, MDS 3065-SB, MDS 3095-SA, and MDS 3095-SB. The coils are made of rugged construction materials and can operate in temperatures from -25 to 70 degrees Celsius. Accessories include extension cables to connect the detector coils to amplifiers from up to 50 meters away.

Uploaded by

Jean Valjean
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
162 views1 page

Metal Detectors: MDS Series Specs

This document summarizes metal detectors in the MDS Series designed for outdoor use. It provides the dimensions and specifications for four detector coil models: MDS 3065-SA, MDS 3065-SB, MDS 3095-SA, and MDS 3095-SB. The coils are made of rugged construction materials and can operate in temperatures from -25 to 70 degrees Celsius. Accessories include extension cables to connect the detector coils to amplifiers from up to 50 meters away.

Uploaded by

Jean Valjean
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

METAL DETECTORS

Detector coils

Series MDS

Designed for outdoor use


Rugged construction
Substantially made

Design MDS 3065-S 55 MDS 3095-S

Dimensions
137

L1

10
300

198
270

L3
L2

Dimensions L1-L2-L3 [mm] 650-700-670 950-1000-970

ID-No. P81054 P81055 P81056 P81057


Type MDS 3065-SA MDS 3065-SB MDS 3095-SA MDS 3095-SB
Coil type A B A B
Ambient temperature [°C] -25...+70
Protection [EN 60529] IP 67
Housing material PBT / aluminium plate
Connection 3 m PUR cable with cable plug
Sensitivity diagram (steel cube ST 37)
Schaltabstand distance / mm
500

400

300 Maximum sensitivity for


200
detector coil MDS 3065 with MDV

100

0
0 50 100 150 200 250 300 350 400
Kantenlänge length / mm
Note:
When using a single detector coil connected to a single amplifier use coil type A. When using two detector coils one coil
must be coil type A and the other coil type B. The maximum detection width increases up to 1800 mm (see connection box
MA 125, page 8.07).

The standard cable length for the connection cable of the detector coil is 3 m. The extension cable type KS031-DS has
two plugs, which can connected at the amplifier and also at the detector coil. The maximum lengths of the extension cable
is 50 m.

Coils MDS 3065-S (P81007) and MDS 3095-S (P81009) are replaced by MDS 3065-SA (P81054) or MDS 3095-SA (P81056)
respectively. The technical and mechanical specifications are unchanged.
Accessories Extension cable KS031-DS.., see page 8.07
8.06 EE81006 EGE-Elektronik Spezial-Sensoren GmbH • http://www.ege-elektronik.com

You might also like