GENERAL SPECIFICATION

1. ALL AUXILLIARY WORKS HEREIN INCLUDED SHALL BE EXECUTED IN ACCORDANCE WITH

THE PROVISION OF THE LATEST EDITION OF THE PHILIPPINE ELECTRONICS CODE, THE RULES
AND REGULATIONS OF THE LOCALITY AND THE LATEST REVISIONS OF ANSI/TIA STANDARDS. LEGEND OF SYMBOLS
2. ALL AUXILLIARY WORKS HEREIN INCLUDED SHALL BE EXECUTED BY EXPERIENCED MEN
SD ADDRESSABLE SMOKE DETECTOR SD CONVENTIONAL SMOKE DETECTOR
UNDER THE DIRECT SUPERVISION OF A FULL TIME LICENSED ELECTRONICS ENGINEER(ECE). A C

ALL WORKS SHALL BE NEATLY PLACED, SECURELY FASTENED AND PROPERLY FINISHED. HD
A
ADDRESSABLE HEAT DETECTOR HD
C
CONVENTIONAL HEAT DETECTOR

H/S HORN/STROBE SD CONVENTIONAL SMOKE DETECTOR

MEZZANINE MEZZANINE
3. MATERIALS SHALL BE NEW AND SHALL CONFORM WITH THE STANDARD AMERICAN UNDER-
M ADDRESSABLE MANUAL PULL END OF LINE RESISTOR (EOL)
WRITER'S LABORATORIES, INC., IN EVERY CASE WERE SUCH A STANDARD HAS BEEN
FACP FIRE ALARM CONTROL PANEL
ESTABLISHED FOR THE PARTICULAR TYPE OF MATERIAL IN QUESTION.
PA SYSTEM SPEAKER, CEILING MOUNTED

CLOSED CIRCUIT TELEVISION (CCTV) CAMERA,

4. ELECTRICAL TRADE SIZE SHALL BE USED, A MINIMUM OF 15mmØ FOR CONDUITS AND FIXED INTERIOR, CEILING MOUNTED

CCTV CAMERA, PAN - TILT - ZOOM (PTZ) INTERIOR,

IN NO CASE SHALL THERE BE MORE THAN THE EQUIVALENT OF FOUR QUARTER BENDS CEILING MOUNT

IN ANY ONE RUN. DATA OUTLET, WALL MOUNT

VOICE OUTLET, WALL MOUNT

5. ALL CONDUITS SHALL BE PROTECTED AGAINST DAMAGES BY THE ENTRANCE OF WATER
NVR
AND FOREIGN MATTER DURING CONSTRUCTION. ALL ENDS OF CONDUITS SHALL BE NETWORK VIDEO RECORD

PROPERLY PLUGGED TO EXCLUDE MOISTURE AND DUST IMMEDIATELY AFTER THE CON- PABX
PRAVITE AUTOMATIC BRANCH EXCHANGE

DUITS ARE PLACED. FLOOR ANNUNCIATOR

6. ALL CONDUIT BENDS SHALL BE FIELD-MADE USING HYDRAULIC BENDERS. MINIMUM

BENDING RADIUS SHALL BE IN ACCORDANCE WITH THE CODE.

7. ALL PIPES AND FITTINGS ON EXPOSED WORK SHALL BE SUPPORTED AND SECURED BY VICINITY MAP
MEANS OF C-CHANNELS AND CLAMPS.

8. MOUNTING HEIGHTS OF DEVICES SHALL BE AS APPROVED BY THE ARCHITECT AND/OR AS

FOLLOWS :
FACP....................................... 1.60m above finished floor to top of panel
VOICE & DATA OUTLET ........................ 0.30m above finished floor to center of device
0.15m above working counter to center of device

9. THE CONTRACTOR SHALL EXAMINE AND STUDY THE ARCHITECTURAL

SCALE DRAWING, LARGE-SCALE AND FULL-SIZE DETAILS, APPROVED SHOP DRAWINGS
FROM OTHER TRADES AND SHALL FREQUENTLY CONSULT AND COORDINATE
WITH OTHER TRADES TO AVERT CONFLICT IN ACTUAL SITE INSTALLATION WORKS.
10. THE PLANS AS DRAWN ARE BASED UPON THE ARCHITECTURAL PLANS AND DETAILS.
THE PLANS ARE DIAGRAMMATICAL AND DO NOT SCALE SHOW ALL FITTINGS
NECESSARY TO FIT TO THE BUILDING CONDITIONS. THE LOCATION OF INFORMATION
OUTLETS, APPARATUS AND APPLIANCE SHOWN ON THE PLANS ARE APPROXIMATE.
HERE
11. THE CONTRACTOR SHALL BE RESPONSIBLE FOR THIER PROPER LOCATION IN ORDER
TO MAKE THEM FIT WITH THE ARCHITECTURAL DETAILS AND INSTRUCTIONS FROM
THE ENGINEER'S REPRESENTATIVE AT THE SITE.

GENERAL NOTES

DESIGNED & CERTIFIED BY: PROJECT TITLE: OWNER/ ADDRESS: SHEET CONTENTS REVISIONS SHEET NO.
NO. DATE
Engr. Jeniel Z. Pascual, PECE, MBA
FDAS VENZON LIGHTING GENERAL NOTES 1
PROFESSIONAL ELECTRONICS ENGINEER
2
ECE
PTR № PAM-6762535B
PTR DATE ISSUED
PRC № 0001301 TIN 290-101-859-000
LOCATION:

BRGY. LARA, CITY OF SAN FERNANDO

ADDRESS

BRGY. LARA, CITY OF SAN FERNANDO

CAD BY: CJG CHECK BY: JZP 3 1 0
PTR PLACE ISSUED PRC EXPIRY DATE
January 20, 2020 City of San Fernando August 22, 2022 DATE: 07/03/2020 DATE: 07/03/2020 4
 8''

7'

4
9

1
H/S
M
SD SHE
SD
HE
SD SD SD
C ASSEMBLY C C SPRAY C PAINTING C CARPENTRY
AREA BOOTH PREPARATION

A
H/S
M
PACKAGING

OFFICE AREA
HD AREA
C
SD
C

DRYING
OVEN CNC
MONITOR SD SD SD SD SD
C C C C C ROUTER
H/S
M

SD SD
ADMIN.
MEZZANINE AREA
MEZZANINE WAREHOUSE

SD SD SD
C C C
SD
OFFICE
C
SD SD SD SD SD
C C C C C

TO FACP ZONE 2
ROAD

TO FACP ZONE 1 FACP

H/S
M

SHOW ROOM CNC

SD SD
C C SD PLASM
SD STORAGE C
SD
C C

FAB.

B
SD SD
KITCHEN SHE C HEC
DINING HD
C

2650 00

FIRE DETECTION ALARM SYSTEM

DESIGNED & CERTIFIED BY: PROJECT TITLE: OWNER/ ADDRESS: SHEET CONTENTS REVISIONS SHEET NO.
NO. DATE
Engr. Jeniel Z. Pascual, PECE, MBA
FDAS VENZON LIGHTING FIRE DETECTION ALARM SYSTEM 1
PROFESSIONAL ELECTRONICS ENGINEER
2
ECE
PTR № PAM-6762535B
PTR DATE ISSUED
PRC № 0001301 TIN 290-101-859-000
LOCATION:

BRGY. LARA, CITY OF SAN FERNANDO

ADDRESS

BRGY. LARA, CITY OF SAN FERNANDO

CAD BY: CJG CHECK BY: JZP 3 1 1
PTR PLACE ISSUED PRC EXPIRY DATE
January 20, 2020 City of San Fernando August 22, 2022 DATE: 07/03/2020 DATE: 07/03/2020 4
 ZONE 2 HORN STROBE LIGHT

H/S H/S

ZONE 1 HORN STROBE LIGHT

H/S H/S

ZONE 2

MEZZANINE MEZZANINE

ZONE 1

M M

FIRE ALARM CONTROL

PANEL LOCATED @
OFFICE

FDAS SINGLE LINE DIAGRAM

DESIGNED & CERTIFIED BY: PROJECT TITLE: OWNER/ ADDRESS: SHEET CONTENTS REVISIONS SHEET NO.
NO. DATE
Engr. Jeniel Z. Pascual, PECE, MBA
FDAS VENZON LIGHTING FDAS SINGLE LINE DIAGRM 1
PROFESSIONAL ELECTRONICS ENGINEER
2
ECE
PTR № PAM-6762535B
PTR DATE ISSUED
PRC № 0001301 TIN 290-101-859-000
LOCATION:

BRGY. LARA, CITY OF SAN FERNANDO

ADDRESS

BRGY. LARA, CITY OF SAN FERNANDO

CAD BY: CJG CHECK BY: JZP 3 1 2
PTR PLACE ISSUED PRC EXPIRY DATE
January 20, 2020 City of San Fernando August 22, 2022 DATE: 07/03/2020 DATE: 07/03/2020 4