Scribd
Upload
5K views1 page

020 Distribution Board Inspection (Initial & Quarterly)

This document is an electrical distribution board inspection checklist. It lists items to check such as whether distribution board covers are closed properly, boards are firmly placed and accessible, internal wiring is in good condition, connections are insulated, distribution boards have the proper ELCB/RCCB ratings installed, MCBs and ELCB/RCCBs are tested and working properly, grounding connections are intact, connections are tightened, switches and power points are in good condition, safety signs are displayed, openings are covered, and the interior is clean. Inspectors check off items as OK, defective, or not applicable and note any remarks.

Uploaded by

Shashwat Pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
5K views1 page

020 Distribution Board Inspection (Initial & Quarterly)

This document is an electrical distribution board inspection checklist. It lists items to check such as whether distribution board covers are closed properly, boards are firmly placed and accessible, internal wiring is in good condition, connections are insulated, distribution boards have the proper ELCB/RCCB ratings installed, MCBs and ELCB/RCCBs are tested and working properly, grounding connections are intact, connections are tightened, switches and power points are in good condition, safety signs are displayed, openings are covered, and the interior is clean. Inspectors check off items as OK, defective, or not applicable and note any remarks.

Uploaded by

Shashwat Pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Integrated Gas Surface Facilities for RDG, Vedanta, Barmer

Electrical Distribution Board Inspection Checklist


Company : Approved Rejected

D. B Model / ID: Date of inspection:

D. B Serial #: D.B Rating (A):

OK Defective N/A Remarks


Distribution Boards are weather proof and covers
are closed properly
Distribution Boards are firmly placed
Access to the DB / Panel board free from
obstruction(s)
All Internal wiring (s) are in good condition
All Internal connection(s) are fixed & insulated
properly
All Internal wiring (s) & connection are as per
standard.
Distribution Boards are fitted ELCB / RCCB with
proper rating
MCB fitted, tested and in good working conditions
(if required)
ELCB / RCCB tested and in good working
conditions
Grounding (Body / Neutral) are in good condition
Water poured in earth pits
All connections / termination(s) are tightened
properly.
All switches & power points are in good condition
Electrical safety Warning signs are available
All openings are properly covered / sealed.
Inside the D.B clean and tidy

Comments:

Inspected By Assisted by:


PIUL Electrical Engineer: PIUL HSE :

Signature: Signature:

Date: Date:

You might also like