Scribd
Upload
536 views2 pages

FP5011 P1069 11HL Lintec Blanco

FP5011 is a permanent adhesive label made of a 50 micron thick white PVC film face stock with an acrylic adhesive and a woodfree liner. It has an adhesion of 23.4N after 30 minutes and 27.2N after 24 hours. The label is intended for marking uses and should be stored between 10-30°C and less than 70% humidity to maximize its shelf life.

Uploaded by

Camilo Obando
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
536 views2 pages

FP5011 P1069 11HL Lintec Blanco

FP5011 is a permanent adhesive label made of a 50 micron thick white PVC film face stock with an acrylic adhesive and a woodfree liner. It has an adhesion of 23.4N after 30 minutes and 27.2N after 24 hours. The label is intended for marking uses and should be stored between 10-30°C and less than 70% humidity to maximize its shelf life.

Uploaded by

Camilo Obando
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

30011CL07

LINTEC Technical Information

1．Product: FP5011 P1069 11HL

2．Construction:
Face Material : FP5011
Pressure Sensitive Adhesive : P1069
Release Liner : 11HL
Face Material: PVC film, 50micron thick, white
P.S.A: Acrylic type adhesive
Release Liner: Woodfree liner (blue), with polyethylene laminated on
the both sides and silicone treated on the release side

3．Usage and Properties:


Marking label use (Permanent Adhesion type)

4．Adhesive Properties:
Adhesion Data;
Item Value Test Method
Adhesion(after 30 min) SI 23.4 JIS Z 0237

Adhesion (after 24 hr) SI 27.2 JIS Z 0237

Cohesion (sec) NC 70000 LINTEC Standard


Unit for Adhesion: SI; N/25mm
NC = Non Creep.
Cohesion Test Method: 0º Dead Load Test at 40℃, Applied area of 25mm
x 25mm, Substrate is Stainless steel, Applied
with the rubber roll(2kg) which press back and
forth for 5times, Still weight is 9.8N (1kg).

2-1-2 Koraku, Bunkyo-ku, Tokyo 112-0004 Japan


LINTEC Phone+81 3 3868 7732 1
Corporation Fax +81 3 3868 7755
30011CL07

5. Storage Condition:
1) Avoid storage in places with high humidity and high temperature. Ideal
condition: Temperature;10℃∼30℃, Humidity;＜70%RH.
2) Contact with water and chemical must be avoided.
3) Polyethylene film packaging is recommend for longer shelf life.
4) Direct exposure to the sunlight must be avoided and a distance must be
kept from the light source.
5) To ensure a longer shelf life, store the rolls in a standing position and
sheets must be stored in a laying position.
6) Avoid causing any form of impact on the material.

The statements in this technical information sheet are based upon our knowledge
and practical experience. This data is intended only as a source of information and
is given without any guarantee and does not constitute a warranty. Due to the wide
variety of possible uses and applications, customers should independently
determine the suitability of this material for their specific purpose prior to use.

2-1-2 Koraku, Bunkyo-ku, Tokyo 112-0004 Japan


LINTEC Phone+81 3 3868 7732 2
Corporation Fax +81 3 3868 7755

You might also like