EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation EN 2010

EN 2010 2001
EN 13523-11:2011 Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) EN 2004
EN 13523-12:2017 Coil coated metals - Test methods - Part 12: Resistance to scratching EN 2004
EN 13523-13:2014 Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat EN
EN 13523-14:2014 Coil coated metals - Test methods - Part 14: Chalking (Helmen method) EN 2001
EN 13523-15:2015 Coil coated metals - Test methods - Part 15: Metamerism EN 2002
EN 13523-16:2004 Coil coated metals - Test methods - Part 16: Resistance to abrasion GER
EN 13523-17:2011 Coil coated metals - Test methods - Part 17: Adhesion of strippable films EN
EN 13523-18:2002 Coil coated metals - Test methods - Part 18: Resistance to staining EN
EN 13523-19:2011 Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing EN 2004
EN 13523-20:2011 Coil coated metals - Test methods - Part 20: Foam adhesion EN 2004
EN 13523-21:2017 Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels EN 2010 2003
EN 13523-22:2017 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison EN 2010 2003
EN 13523-23:2015 Coil coated metals - Test methods - Part 23: Colour stability in humid atmospheres containing sulfur dioxide EN 2002
EN 13523-24:2017 Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking GER 2004
EN 13523-25:2014 Coil coated metals - Test methods - Part 25: Resistance to humidity EN 2012 2006
EN 13523-26:2014 Coil coated metals - Test methods - Part 26: Resistance to condensation of water EN 2012
EN 13523-27:2017 Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test) GER 2009
EN 13523-29:2017 Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) EN 2010
EN ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012) EN
EN ISO 13803:2014 Paints and varnishes - Determination of reflection haze on paint films at 20 degrees (ISO 13803:2014) EN
EN ISO 14446:2010 EN
Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999)
EN ISO 14680-1:2006 Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000) EN
EN ISO 14680-2:2006 Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000) EN
EN ISO 14680-3:2006 Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000) EN
EN 15060:2006 Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior EN
use
EN ISO 15091:2012 Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012) EN
EN ISO 15110:2017 Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017) EN 2013
EN ISO 15181-2:2007 EN
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate (ISO
EN ISO 15181-3:2007 EN
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of th
EN ISO 15181-4:2008 EN
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation o
EN ISO 15181-5:2008 EN
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentrati
EN ISO 15181-6:2014 EN by quantitation of its degradation product in the extract
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate
EN ISO 15184:2012 Paints and varnishes - Determination of film hardness by pencil test (ISO 15184:2012) EN
EN ISO 15234:2010 Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration EN of formaldehyde in a small test chamber (ISO 15234:19
EN 15457:2014 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi EN 2007
EN 15458:2014 Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae EN 2007
EN ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) EN
EN ISO 15710:2006 Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002) EN
EN ISO 15711:2004 Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) EN
EN ISO 15715:2006 Binders for paints and varnishes - Determination of turbidity (ISO 15715:2003) EN
EN 15773:2009 Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, ENrecommendations and guidelines
EN ISO 15880:2004 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000) EN
EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography EN - Part 5: Method using light-scattering detection (ISO 160
EN 16074:2011 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials EN
EN 16105:2011 Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water EN
EN ISO 16276-1:2007 Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion EN (fracture strength) of a coating - Part 1: Pull-off testing (I
EN ISO 16276-2:2007 Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion EN (fracture strength) of a coating - Part 2: Cross-cut testing
CEN/TS 16358:2012 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of air inclusions/microfoam in coating films EN
CEN/TS 16359:2012 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of knot staining resistance of wood coatings EN
CEN/TS 16360:2012 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a EN coating on a wooden substrate
EN 16402:2013 Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing EN
EN ISO 16474-1:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013) EN
EN ISO 16474-2:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013) EN
EN ISO 16474-3:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013) EN
EN ISO 16482-1:2016 Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: OvenEN method (ISO 16482-1:2013)
EN ISO 16482-2:2016 EN
Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method (ISO 16482-2:2013)
EN 16492:2014 Paints and varnishes - Evaluation of the surface disfigurement caused by fungi and algae on coatings EN
CEN/TS 16498:2013 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin staining EN
CEN/TS 16499:2013 Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood EN
EN 16566:2014 Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards EN
EN 16623: 2015 EN
Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking 2013
CEN/TS 16700:2014 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on aEN wooden substrate
EN ISO 16773-1:2016 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 1: Terms and definitions EN 2007
(ISO 16773-1:2016)
EN ISO 16773-2:2016 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2: Collection of data EN(ISO 16773-2:2016)
2007
EN ISO 16773-3:2016 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 3: Processing and analysis EN 2009dummy cells (ISO 16773-3:2016)
of data from
EN ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated EN 2009specimens (ISO 16773-4:2017)
and uncoated
EN ISO 16862:2006 Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) EN
EN ISO 16925:2014 Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014) EN
EN ISO 16927:2014 Paints and varnishes - Determination of the overcoatability and recoatability of a coating (ISO 16927:2014) EN
CEN/TS 16969:2016 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance EN
EN ISO 17132:2007 Paints and varnishes - T-bend test (ISO 17132:2007) EN
EN ISO 17463:2014 EN
Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014)
EN ISO 17872:2007 Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO EN 17872:2007)
EN ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) EN
EN ISO 19334:2011 Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis (ISO 19334:2010) EN
EN ISO 20566:2013 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) EN
EN ISO 20567-1:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2017) EN 2006
EN ISO 20567-2:2017 EN
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2017) 2006
EN ISO 20567-3:2012 EN 20567-3:2012)
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 2012
EN ISO 21227-1:2003 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003) EN
EN ISO 21227-2:2006 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2: Evaluation procedure for multi-impact EN stone-chipping test (ISO 21227-2:2006)
EN ISO 21227-3:2007 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion EN around a scribe (ISO 21227-3:2007)
EN ISO 21227-4:2008 EN
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion (ISO 21227-4:2008)
EN 23270:1991 Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO 3270:1984) EN
EN ISO 28199-1:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and ENpreparation of test panels (ISO 28199-1:2009)
EN ISO 28199-1:2009/AC:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and ENpreparation of test panels - Technical Corrigendum 1 (ISO
EN ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content andEN the density of the coating material, and calculation of the the
EN ISO 28199-2:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, processENhiding power, re-dissolving, overspray absorption, wetting,
EN ISO 28199-3:2009 EN
Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power (ISO
EN ISO 29601:2011 Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) EN