Scribd
Upload
58 views

Circuit Description: Heated Oxygen Sensor EFI Relay Heater Sensor Ox1A Ht1A ECM From Battery EFI Fuse

This document provides diagnostic trouble codes (DTCs) related to oxygen sensor heater control circuits for Bank 1 Sensors 1 and 2. It lists the DTCs P0031, P0032, P0037, and P0038, along with their detection conditions and associated trouble areas. A circuit diagram is shown for the heated oxygen sensor heater circuit of Bank 1 Sensor 1. The document also contains a hint that the ECM provides pulse width modulation control of current to the sensor heater.

Uploaded by

Clodoaldo Biassio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views

Circuit Description: Heated Oxygen Sensor EFI Relay Heater Sensor Ox1A Ht1A ECM From Battery EFI Fuse

This document provides diagnostic trouble codes (DTCs) related to oxygen sensor heater control circuits for Bank 1 Sensors 1 and 2. It lists the DTCs P0031, P0032, P0037, and P0038, along with their detection conditions and associated trouble areas. A circuit diagram is shown for the heated oxygen sensor heater circuit of Bank 1 Sensor 1. The document also contains a hint that the ECM provides pulse width modulation control of current to the sensor heater.

Uploaded by

Clodoaldo Biassio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

05–60

DIAGNOSTICS – SFI SYSTEM (April, 2003) 05AI8–04

DTC P0031 OXYGEN SENSOR HEATER CONTROL


CIRCUIT LOW (BANK 1 SENSOR 1)

DTC P0032 OXYGEN SENSOR HEATER CONTROL


CIRCUIT HIGH (BANK 1 SENSOR 1)

DTC P0037 OXYGEN SENSOR HEATER CONTROL


CIRCUIT LOW (BANK 1 SENSOR 2)

DTC P0038 OXYGEN SENSOR HEATER CONTROL


CIRCUIT HIGH (BANK 1 SENSOR 2)

CIRCUIT DESCRIPTION
Refer to DTC P0130 on page 05–101.
HINT:
The ECM provides a pulse width modulated control circuit to adjust current through the heater. The heated
oxygen sensor heater circuit uses a relay on the B+ side of the circuit.

Reference (Bank 1 Sensor 1 System Drawing):

EFI Relay ECM


Heated Oxygen Sensor
From EFI Fuse Heater HT1A
Battery
Sensor OX1A
From
Duty
Terminal 6 of
Control
Ignition Switch
Ground Ground

A82244

DTC No. DTC Detection Condition Trouble Area


P0031 Heated current is 0.25 A or less when heater operates with B+  Open or short in heater circuit of heated oxygen sensor
P0037 greater than 11.5 V (1 trip detection logic)  Heated oxygen sensor heater
P0032 Heated current exceeds 3.5 A when heater operates  EFI relay
P0038 (1 trip detection logic)  ECM

2004 COROLLA (RM1037U)

Author: Date: 225

You might also like