Construction Equipment

DX225LCA
Engine Power SAE J1995, gross 115 kW (154 HP) @ 1,900 rpm
SAE J1349, net 110 kW (148 HP) @ 1,900 rpm
Operational Weight 21,500 kg (47,399 lb)
Bucket Capacity (SAE/PCSA) 0.39 ~ 1.51 m3 (0.51 ~ 1.98 yd3)
DOOSAN DX225LCA HYDRAULIC EXCAVATOR :
A NEW MODEL WITH NOVEL FEATURES

THE NEW DX225LCA HYDRAULIC EXCAVATOR HAS ALL THE ADVANTAGES

The new DX225LCA hydraulic excavator has all the advantages of the previous model, the Solar
225LC and now offers additional added value to the operator. The key phrase used during the
development of the DX225LCA was “giving optimum value to the end user.”

1. HEAVY-DUTY SPECIFICATION TO 2. ENHANCE EASY ACCESS TO ALL 3. BEST WORK EFFICIENCY

GUARANTEE MACHINE UPTIME COMPARTMENT
- Heavy duty boom & arm - In-house mechanical engine is easy to - Provide 3 working mode
- Double filtering system for moisture fix due to simple structure - Operator can select proper working
- Air filter system has made the engine - Filter locations are easily accessible at mode for best productivity
more adaptable to dusty area ground level
 NEWLY ADDED FEATURE

7 INCH MONITOR CLIMATE CUSTOMIZED HYDRAULIC OILS HEAVY-DUTY FRONT ROPS CERTIFIED CABIN (OPTIONAL)
- New, user-friendly LCD color monitor (VG32, VG46, VG68) - Reinforced castings and forged steel - One of the most spacious cabs in the market,
with full access to machine settings and - Maintain best performance by keeping pivot points and reinforced heavy-duty with low noise & vibration levels and excellent
maintenance data. optimum viscosity in various region arm and boom to withstand high-impact all-round visibility.
materials. - Fully adjustable suspension seat, air
- To better protect the base of the arm, conditioning with climate control as standard.
reinforced bars have been added and the
arm center and end boss have been
strengthened.

PRE CLEANER
ADVANCED FRONT BUSH - Rotor type dry pre-cleaner an standard
- EM bushing (Enhanced Macro-surface) (Donaldson Top Spin 5")
- Pocket & Dimple surface pattern : - Separate more than 99% of particles of 20 micron
Optimized greasing & Trap foreign object and above particles.
- Wear resistant solid lubricant coating :
Noise free & enhanced anti-seizure
property
- 30% longer life time than steel bush

WATER SEPARATOR
- Large capacity of additional fuel water separator
filters water in fuel and enhance engine’s
durability.

ADVANCED H-CLASS BUCKET

- Doosan new H-class bucket designed for
higher productivity.
- Newly designed side cutter and abrasion
resistant steel increase bucket solidity.

ADVANCED UNDERCARRIAGE
Strengthen Sprocket structure and tooth
- Structure to prevent debris

* Option spec info is included to the images contained in this material and may not be the same with the actual specs.
 PERFORMANCE & PRODUCTIVITY

The performance of the DX225LCA has a direct effect on its productivity. Its new improved DOOSAN ENGINE(DB58TIS)
engine and new EPOSTM controlled hydraulic system have combined to create an unbeatable
hydraulic excavator, with a cost/performance ratio that makes the DX225LCA even more
appealing.

Doosan product gives high performance through

in-house engine

Doosan engine(In-house) perfectly harmonized with

the hydraulic system and provides strong power.
Mechanical engine provides high resistance to
moisture, dust, and bad fuel quality.
The best engine power in the industry(148HP)
provides stable working speed even in the heavy
workload situation.

1 2 3

1 HYDRAULIC PUMP EXCAVATOR CONTROL

The Main pump has a capacity of 2x206.5l/min reducing Improved Excavator control by New EPOSTM system
cycle time while a high capacity gear pump improves pilot The brains of the hydraulic excavator, the EPOSTM (Electronic
line efficiency. Power Optimizing system), have been improved, through a
CAN (Controller Area Network) communication link, these
2 SWING DRIVE units are now perfectly synchronised.
Shocks during rotation are minimized, while increased
torque is available to ensure rapid cycles.

3 TRAVEL DEVICE
Travel device provides simple internal structure and
increases efficiency of the performance.
Thicker sprocket minimizes incoming debris and provides
higher durability.
 DURABILITY & RELIABILITY

The reliability of an item of plant contributes to its overall lifetime operating costs. HEAVY DUTY BOOM & ARM BOOM (STANDARD)
DOOSAN uses computer-assisted design techniques, highly durable materials and
structures then test these under extreme conditions.
Arm Center Plate
A
- Size increased 19%
G B Boom End Bracket
- Single piece of casting type

Arm Bottom Plate

G - Increase plate thickness 40%
C Arm Side Plate
- Increase plate thickness 14%
D

E
Arm Back Plate
- Equipped add. Reinforced bar

Heavy Duty Bucket

- Enhanced design new bucket

F
Boom Plate
- Increase boom foot height and
decrease width
- Increase plate thickness 33%

1 2 3

1 ADVANCED PIN-BUSH AND DISK / 3 TRACKS

SHIM TECHNOLOGY The chain is composed of self-lubricating sealed links isolated
Pocket & Dimple surface pattern : Optimized greasing & from all external contamination. The tracks are locked by
mechanically bolted pins.
- Wear resistant solid lubricant coating :
Noise free & enhanced anti-seizureproperty. HEAVY DUTY & FIXED TRACK (OPTIONAL)
- Polymer shim with hard metal disk (90% less abrasion) 1. Idler Bracket
- Hard metal anti-wear disk (75% lessabrasion) - Thick & Wide strip to avoid bracket bending
2. Track Under Cover Plate
2 INTEGRATED TRACK SPRING AND IDLER - Reinforced track under cover (3.2T 4.5T)
The track spring and the idler have been joined directly to - Reinforced mounting
achieve high durability and improved maintenance 3. Track Motor Cover
convenience. - (Out) Add bolt head guard
- (In) Reinforced motor cover mounting bolt using steel rib
FUEL EFFICIENCY

RELIEF CUTOFF The pump continues to supply flow even when the maximum
pressure on the system is reached due to severe working
environments and large workloads. Relief cutoff technology of
DX225LCA prevents transfer of unnecessary flow to maintain
Cylinder
powerful working level at the maximum value while reducing
consumption of fuel.

Hydraulic Pump

Saves
20~30%
of Fuel

OPTIMIZED LEVER CONTROL & When operator takes a break and leaves the control joystick
AUTO IDLE fixed, both of the engine and the pump are kept in standby mode
and prevents unnecessary fuel consumption.

100 % 50 %

PUMP MATCHING TECHNOLOGY

Engine & pump matching, the new technology of Doosan,
fully resolves problems; low respones time of the system,
unnecessary fuel consumption. Matching response time
between pump and engine efficiently reduces unnecessary
fuel consumption as well as exhaust fumes.

Main Pump 100% Engine

POWER UP
 OPERATOR COMFORT

More space, better visibility, air conditioning, a very comfortable seat. These are all elements MONITOR
that ensure that the operator can work for hours and hours in excellent conditions.

1 3 power modes for maximum efficiency 1 Control panel

- Power mode
2 Navigation modes
- Standand mode
- Rearview camera, Display selector
- Economy mode
3 Working modes
- Auto-idle & Flow rate control
3 work modes to suit your application
2 3 - 1-way mode
- 2-way mode
- Digging mode

CONTROL PANEL
A Standard screen
B Anti-theft protection
A B C
C Filter/oil information
D Operation history
E Flow rate control

D E F
F Contrast control

1 2

1 CONTROL LEVER 2 AIR SUSPENSION SEAT (OPTIONAL)

Very precise control of the equipment increases versatility, Equipped with various functions of adjustment forth and back
safety and facilitates tricky operations requiring great and, and lumbar support, it reduces the vibration of
precision. Levelling operations and the movement of lifted equipment transmitted during work in an effective way.
loads in particular are made easier and safer. DOOSAN Also for considering winter working environment, Seat
designed the DX225LCA by putting the operator at the center warmer functions equipped.
of the development goals. The result is significant ergonomic
value that improves the efficiency and safety of the operator.
More space, better visibility, air conditioning, a very
comfortable seat... These are all elements that ensure that
the operator can work for hours and hours in excellent
conditions.
 EASY MAINTENANCE

Short maintenance operations at long intervals increase the availability of the

equipment on site. DOOSAN has developed the DX225LCA with a view to high
profitability for the user.

1 2

3 4 5

6 7 8

1 ENGINE OIL FILTER 5 WATER SEPARATOR

The engine oil filter offers a high level of filtration allowing High efficiency and large capacity water separator protect the
the oil change interval to be increased to 500 hours. It is engine by removing most moisture from the fuel.
easy to access and is positioned to avoid contaminating the
surrounding environment. 6 PC MONITORING (DMS)
2 EASY MAINTENANCE A PC monitoring function enables connection to the EPOSTM
system, allowing various parameters to be checked during
Access to the various radiators is very easy, making maintenance, such as pump pressures, engine rotation
cleaning easier. Access to the various parts of the engine is speed, etc. and these can be stored and printed for
from the top and via side panels. subsequent analysis.
3 HYDRAULIC OIL RETURN FILTER 7 PRE CLEANER
The protection of the hydraulic system is made more Install rotor type pre-cleaner (Donaldson Top Spin 5”).
effective by the use of glass fiber filter technology in the So filtering efficiency 20% increased
main oil return filter. This means that with more than 99.5%
of foreign particles filtered out, the oil change interval is 8 CENTRALIZED GREASE INLETS FOR EASY
increased.
MAINTENANCE
4 AIR CLEANER The boom & arm grease inlets are grouped for easy access.
The large capacity forced air cleaner removes over 99% of
airborne particles, reducing the risk of engine
contamination and making the cleaning and cartridge
change intervals greater.

* Option spec info is included to the images contained in this material and may not be the same with the actual specs.
 TELEMATICS SERVICE (OPTIONAL) GLOBAL PARTS NETWORK
TELECOMMUNICATIONS GLOBAL PDC (PARTS DISTRIBUTION CENTER) NETWORK
Data flow from machine to web Doosan provides fast and precise worldwide delivery of genuine Doosan parts through its global PDC (parts distribution center) network.

TELEMATICS SERVICE TERMINAL TELECOMMUNICATION DOOSAN TELEMATICS SERVICE WEB GLOBAL NETWORK

Telematics Service GPS, EPOSTM data is sent to Doosan, Dealer, Customer The global network of the GPDC (Global Parts Distribution Center) maximizes its supply rate by making sure that each center is stockpiled with all
terminal is installed to designated server by GSM, can easily monitor the GPS, the critical parts required for businesses in its area. The network also minimizes the time and costs required for parts delivery by positioning PDCs
machine / connected to Satellite EPOSTM data from Core close to major markets around the world. Doosan PDCs communicate with customers in their time zone, informing them that they are open for
EPOSTM telecommunication Telematics Service web operation, and deliver parts to them as early as possible.

The Global Parts PDCs had been set up as shown below, includin Mother PDC in Ansan, Korea.
FUNCTIONS TELEMATICS SERVICE BENEFITS Distribution Center Network The nine other PDCs include one in China (Yantai), three in the USA (Chicago, Atlanta, Miami),
Doosan Telematics Service provides various functions to support your great performance Doosan and dealer support customers to improve one in Brazil (Americana), two in Europe (U.K. and Germany), one in the
work efficiency with timely and responsive services Middle East (Dubai) and one in Asia (Singapore)
(As of April, 2019)
Customer
Improve work efficiency
· Timely and preventive service
· Improve operator’s skills by comparing work pattern
GPS Fuel information Preventive maintenance · Manage fleet more effectively Germany
Halle
Dealer
Better service for customers
U.K
· Provide better quality of service U.S
· Maintain machine value Cardiff
Operation hours Fault code/warning Seattle U.S
· Better understanding of market needs China
Atlanta
Yantai Korea
Dubai Ansan U.S
Doosan Miami
Responsive to customer’s voice
· Utilize quality-related field data Singapore
· Apply customer’s usage profile to deveping new
ADT Productivity Reports machine

FUNCTION EXCAVATOR WHEEL LOADER ADT Brazil

·Location Americana
GPS All models All models All models
·Geo-fence
E-mail reports ·Daily, Weekly, Monthly report All models All models All models MPDC : Mother Parts Distribution Center PDC : Parts Distribution Center
·Total operation hours All models All models
Operation hours All models
·Operation hours by mode Tier 4 only Tier 4 only

Maintenance parts
·Preventive maintenance by item
All models Tier 4 only All models PDC
replacement cycle BENEFIT
·Fault code
Fault code/ Warning All models Tier 4 only All models
·Machine Warnings on Gauge Panel
·Fuel level All models
Fuel information Tier 4 only All models
·Fuel consumption Tier 4 only Distribution Cost Maximum Parts Shortest Real-time service Minimum
·Dump tonnage Reduction supply rate distance/time support downtime
Dump capacity N/A N/A All models
·Count of Work Cycle parts delivery
 ATTACHMENTS
Heavy Construction Bucket, which is also called Heavy Duty bucket, is the most commonly used bucket in the
construction equipment market and is designed mainly for use in heavy construction but also used in low density
mining and quarry application.
BUCKET General Purpose Bucket Heavy Duty Bucket Severe Duty Bucket

Capacity (SAE/PCSA)
Hinge Adapter Wrapper (Shell) Horizontal Bottom Wear Plates
GENERAL PURPOSE BUCKET 0.39 / 0.51/ 0.81/0.92/1.05/1.17 m3
Optimized reinforced construction Corner adapter Positioned under Shape increases heel clearance Protects bottom section and
for high strength and performance Side cutter to increase strength. and decreases wear rate. reinforces bucket for greater HEAVY DUTY BUCKET 0.92 / 1.08 / 1.24 m3
matched to the machine‘s power. strength and rigidity. Designed for SEVERE DUTY BUCKET 0.91 / 1.07 m3
easily replacement during
maintenance repair.

DEMOLITION Hydraulic Breaker Fixed Pulverizer Rotating Crusher Multi-Processor

Model Weight Tool diameter Frequency

HYDRAULIC BREAKER HB20 1,862 kg 135 mm 400~800 BPM

Model Weight Max. Jaw opening Force at Tip

FIXED PULVERIZER FP22 1,375 kg 732 mm 54 t
ROTATING CRUSHER RC22 1,780 kg 732 mm 56 t
MULTI-PROCESSOR C/D/P/S MP22 2,040 / 2,050 / 2,210 / 1,880 kg 903 / 797 / 893 / 503 mm 68 / 70 / 64 / 80 t

C : Crushing jaw
D : Demolition jaw
Lip Plate (Cutting Edge) Tooth (Tip) Side cutter Side Wear Plates P : Pulverizing jaw
S : Shearing jaw
Beveled edge for better penetration Designed with mechanical Designed for better penetration and Side plates meet up with bottom
and 500BHN material for high properties that maintain hardness used high wear resistant material. wear plates for seamless corner
abrasion resistance. for long wear life in tough digging protection. MATERIAL HANDLING Multi-Grapple Stone Grapple Wood Grapple Log Grapple Orange Grapple
applications.
Model Weight Max Jaw opening Max. Closing Force Capacity
MULTI-GRAPPLE MG22 1,423 kg 2,044 mm 5.7 t 0.75 m3
STONE GRAPPLE SG22 1,470 kg 2,300 mm - 0.45 m2
WOOD GRAPPLE L/P WG22 1,450 / 1,190 kg 2,300 mm - 0.62 m2
LOG GRAPPLE L/P LG22 1,400 / 1,270 kg 2,095 / 2,225 mm - 0.67 m2
ORANGE GRAPPLE OG22 1,300 kg 2,150 mm - 0.50 m3
L : Link type
P : Pendulum type

Heavy Duty bucket

General Purpose bucket Severe Duty bucket
which is also called Heavy Duty bucket, is the most
which is also called General Purpose bucket, is which is also called Severe Duty bucket.
commonly used bucket in the construction
designed for digging and re-handling soft to
equipment market and is designed mainly for use in
The bucket is designed for use in high density EARTH MOVING Clamshell Bucket Plate Compactor Ripper
medium materials e.g. mining and quarry application using high strength
heavy construction but also used in low density Model Weight Max. Jaw opening Capacity
materials with low wear characteristics such as and high abrasion resistance materials.
mining and quarry application.
top-soil, loam, coal. It can be used in the toughest of applications. CLAMSHELL BUCKET CB22 1,440 kg 2,080 mm 0.80 m3

Model Weight Base plate (WxL) Impulse force

PLATE COMPACTOR PC22 1,094 kg 860 x 1,200 mm 11.2 t

TOOTH Model Weight Height

RIPPER RP22 450 kg 1,278 mm
GD (General Duty) Tooth HD (Heavy Duty) Tooth SD (Severe Duty) Tooth
Optimized design for Doosan’s GP and the Optimized design for the Heavy Construction Optimized design for the Severe Mining bucket
new General Construction bucket. bucket. Suitable for machines ranging from 14 to and the Xtreme Mining bucket. Suitable for
Suitable for machines ranging from 14 to 70 70 tons. machines ranging 22 to 70 tons. Recommended
CONNECTING Quick Coupler
tons. Recommended for general construction Recommended for most applications for extremely tough quarries and mining
and utility loading applications. including excavating, trenching, loading and application. Model Weight Bucket Pin dia. Working rage (Pin to Pin)
medium density quarries and mining. QUICK COUPLER QC22 319 kg 80 mm 445 ~ 514 mm
TECHNICAL SPECIFICATIONS
ENGINE HYDRAULIC SYSTEM UNDERCARRIAGE ENVIRONMENT
Model The heart of the system is the EPOSTM (Electronic Power Optimizing Chassis are of very robust construction, all welded structures are Noise levels comply with environmental regulations (dynamic values).
Doosan DB58TIS System). It allows the efficiency of the system to be optimized for all designed to limit stresses.
Sound level guarantee
2 valves per cylinder, vertical injectors, water cooled, turbo charged with working conditions and minimizes fuel consumption. High-quality material used for durability.
Lateral chassis welded and rigidly attached to the undercarriage. 103 dB (A) (2000/14/EC)
air to air intercooler. The emission levels are well below the values • The hydraulic system enables independent or combined operations.
required for phase II. Track rollers lubricated for life, idlers and sprockets fitted with floating Cab sound level
• Two travel speeds offer either increased torque or high speed
seals.
Number of cylinders tracking. 73 dB (A) (ISO 6396)
Tracks shoes made of induction-hardened alloy with double grouser.
• Cross-sensing pump system for fuel savings.
6 Heat-treated connecting pins.
• Auto deceleration system.
Nominal flywheel power
Hydraulic track adjuster with shock-absorbing tension mechanism. REFILL CAPACITIES
• Two operating modes, two power modes.
115 kW (154 HP) @ 1,900rpm (SAE J1995, gross) • Button control of flow in auxiliary equipment circuits. Number of rollers and track shoes per side Fuel tank
110 kW (148 HP) @ 1,900rpm (SAE J1349, net) • Computer-aided pump power control. Upper rollers : 2 (standard shoes) 400 l (105.7 US gal)
Lower rollers: 8
Max torque Main pumps Cooling system (Radiator capacity)
Shoes : 49
61.5 kgf.m (603 Nm) at 1,400 rpm 2 variable displacement axial piston pumps Total length of track : 4,445 mm (14’ 7”) 24 l (6.3 US gal)
Max flow: 2 x 206.5 l/min
Piston displacement Engine oil
5,785 cc (353 cu.in) Pilot pump DRIVE
28.8 l (7.6 US gal)
Gear pump - max flow: 28.5 l/min
Bore & stroke Each track is driven by an independent axial piston motor through a Swing drive
102 mm x 118 mm (4.0” x 4.6”) Maximum system pressure planetary reduction gearbox.
5 l (1.32 US gal)
Boom/arm/Bucket : Two levers with control pedals guarantee smooth travel with counter-
Starter rotation on demand. Final drive
Normal mode : 330 kgf/cm2
24 V / 4.5 kW Power mode : 350 kgf/cm2 (each =Travel Device = travel motor + travel reduction gear)
Travel speed (fast/slow)
Batteries Travel : 330 kgf/cm2 2 x 4 l (2 x 1.06 US gal)
5.5 / 3.0 km/h (3.4 / 1.9 mph)
Swing : 270 kgf/cm2
2 x 12 V / 100 Ah Hydraulic tank
Maximum traction force
Air cleaner 195 l (51.5 US gal)
11,500 / 21,800 kgf (25,353 / 48,061 lbf)
Double element with auto dust evacuation.
Maximum grade
35˚ (70%)
HYDRAULIC CYLINDERS SWING MECHANISM
BUCKET
The piston rods and cylinder bodies are made of high-strength steel. • An axial piston motor with two-stage planetary reduction gear is
A shock absorbing mechanism is fitted in all cylinders to ensure shock- used for the swing. TRACK STD Track
free operation and extend piston life. • Increased swing torque reduces swing time.
C/W (ton) 4.1 5.3
• Internal induction-hardened gear.
Cylinders Quantity Bore x Rod diameter x stroke • Internal gear and pinion immersed in lubricant bath. SHOE (mm) 600
Boom 2 125 x 85 x 1,263 mm • The swing brake for parking is activated by spring and released
Arm 1 140 x 100 x 1,443 mm hydraulically. Capacity (m3) Width (mm) 5.7m Boom SLR (8.5m)
Bucket 1 120 x 80 x 1,060 mm Bucket Type Width (kg)
Swing speed : 0 to 11.0 rpm
SAE/PCSA CECE W/O Cutter With Cutter 2.4m HD Arm 2.9m HD Arm 3.5m Arm SLR (6.2m)

0.39 0.35 825 736 347 - - - A

0.51 0.47 768 722 549 A A A X
GP 0.81 0.72 1,125 1,065 684 A A A X
0.92 0.81 1,233 1,173 724 A A A X
1.05 0.92 1,369 1,309 776 A B B X
WEIGHT
DC 0.54 0.46 1,800 - 358 - - - C
Boom 5,700 mm (18’8”) Arm 2,900 mm (9’6”) Bucket SAE/PCSA 0.92 m3 (1.20 yd3)
0.92 0.83 1,050 1,096 867 A A B -
Shoe width Operating weight Ground pressure (kgf/cm2)
H 1.08 0.97 1,200 1,246 939 B B C -
Triple Grouser (Std) 600 mm (2’) 21,500 kg (47,399 lb) 0.45 kgf/cm2
1.24 1.11 1,350 1,396 1,011 C C D -
700 mm (2’ 4”) 21,800 kg (48,060 lb) 0.40 kgf/cm2
0.91 0.82 1,050 1,094 1,078 A B C -
800 mm (2’ 8”) 22,100 kg (48,721 lb) 0.35 kgf/cm2 S
1.07 0.96 1,200 1,244 1,182 B C D -
900 mm (2’ 11”) 22,400 kg (49,383 lb) 0.31 kgf/cm2
Maximum load pin-on(payload+bucket) 3153 2898 2686 1312

Based on ISO 10567 and SAE J296, arm length without quick change clamp This bucket recommendation is based on machine stability considering the tipping load
A : Suitable for materials with density of 2,100 kg/m3 (3,500lb/yd3) or less with certain density of handling material, and should be strictly followed.
B : Suitable for materials with density of 1,800 kg/m3 (3,000lb/yd3) or less It’s more recommendable to use a smaller size of bucket than recommendation under the
C : Suitable for materials with density of 1,500 kg/m3 (2,500lb/yd3) or less severe working condition and application to avoid the durability risks.
D : Suitable for materials with density of 1,200 kg/m3 (2,000lb/yd3) or less
X : Not recommended
DIMENSIONS WORKING RANGES

DIMENSIONS
Boom 5,700 mm (18’8”) Arm 2,900 mm (9’6”) Shoe 600 mm (2’) - Std

Boom type 5,700mm 8,500mm

Arm type 2,400mm (Std.) 2,900mm 3,500mm 6,200mm

3 3 3
Bucket type (SAE / PCSA) 1.05m (Std.) 0.92m 0.81m 0.39m3 ditch
A Rear Swing Radius 2,840mm 2,840mm 2,840mm 2,840mm

B Shipping Height (Boom) 2,860mm 2.960mm 3,209mm 3,306mm

C Shipping Height (Hose) 3,125mm 3,005mm 3,394mm 3,382mm

D Shipping Length 9,545mm 9,505mm 9,530mm 12,330mm

E Shipping Width 2,990mm 2,990mm 2,990mm 2,990mm WORKING RANGE

Boom lenght 5,700mm 8,500mm
F Counterweight Clearance *1066mm *1066mm *1066mm *1066mm

G House Width 2,710mm 2,710mm 2,710mm 2,710mm Arm type 2,400mm (Std.) 2,900mm 3,500mm 6,200mm

H Cabin width 1,010mm 1,010mm 1,010mm 1,010mm Bucket type (SAE / PCSA) 1.05m3 (Std.) 0.92m3 0.81m3 0.39m3 ditch
A Max. digging reach 9,475mm 9,895mm 10,395mm 15,365mm
I Tumbler Distance 3,650mm 3,650mm 3,650mm 3,650mm

J Track Length 4,446mm 4,446mm 4,446mm 4,446mm B Max. digging reach at ground level 9,295mm 9,705mm 10,230mm 15,255mm

K Undercarriage Width 2,990mm 2,990mm 2,990mm 2,990mm C Max. digging depth 6,115mm 6,620mm 7,220mm 11,650mm

L Shoe Width 600mm 600mm 600mm 600mm D Max. dumping height 6,665mm 6,805mm 6,950mm 11,660mm

M Track Heigh *883mm *883mm *883mm *883mm E Min. dumping height 2,975mm 2,465mm 1,860mm 2,015mm

N Ground Clearance *450.5mm *450.5mm *450.5mm *450.5mm F Max. digging height 9,435mm 9,540mm 9,640mm 13,045mm

G Max. bucket pin height 8,125mm 8,270mm 8,405mm 12,050mm

DIGGING FORCE (ISO)
H Max. vertical wall depth 4,480mm 4,765mm 5,105mm 8,385mm
Bucket (SAE/PCSA) 0.51m3 0.81m3 (Std.) 0.92m3 1.05m3 1.28m3 0.54m3 ditch
15,200kgf 15,200kgf 15,200kgf 15,200kgf 15,200kgf 15,200kgf
I Max. radius vertical 7,025mm 7,335mm 7,705mm 11,440mm
Digging force 149.2kN 149.2kN 149.2kN 149.2kN 149.2kN 149.2kN
33,510lbf 33,510lbf 33,510lbf 33,510lbf 33,510lbf 33,510lbf J Max. digging depth(8'level) 5,910mm 6,435mm 7,050mm 11,560mm
Arm 2,400mm (Std.) 2,900mm 3,500mm 6,200mm
K Min. radius 8' line 2,865mm 2,850mm 2,820mm 4,840mm
10.9ton 12.6ton 9.7ton 6.0ton
Digging force 107kN 123kN 95kN 59kN
L Min. digging reach 1,762mm 599mm -160mm 593mm
24,024lbf 27,770lbf 21,379lbf 13,224lbf
At power boost (ISO) M Min. swing radius 3,575mm 3,570mm 3,615mm 4,970mm

d. Bucket angle (deg) 177 o

177 o
177 o
171 o
LIFTING CAPACITY
Option 1
Metric
Boom : 5,700mm(HD) Arm : 2,900mm(HD) Without Bucket Shoe : 800mm Unit : 1,000kg

A(m) 1.5 3 4.5 6 7.5 Max. Reach

B(m) A(m)

7.5 4.88 * 4.88 * 4.25 * 4.25 * 6.20

6 5.33 * 5.31 3.96 * 3.78 7.31
4.5 5.84 * 5.13 5.39 * 3.57 3.90 * 3.2 7.99
3 8.55 * 7.47 6.65 * 4.86 5.39 3.46 4.00 * 2.91 8.35
1.5 10.15 * 6.92 7.37 4.61 5.25 3.34 4.27 * 2.8 8.42
0 6.10 * 6.10 * 10.91 * 6.63 7.17 4.43 5.15 3.25 4.52 2.86 8.22
-1.5 6.66 * 6.66 * 10.55 * 10.55 * 10.81 * 6.56 7.09 4.35 5.13 3.22 4.92 3.1 7.73
-3 11.36 * 11.36 * 13.75 * 12.98 9.87 * 6.63 7.14 4.4 5.88 3.69 6.88
-4.5 10.46 * 10.46 * 7.64 * 6.88 5.83 * 5.2 5.50

Feet Unit : 1,000lb

A(ft) 5' 10' 15' 20' 25' Max. Reach

B(ft) A(ft)

25 10.77 * 10.77 * 9.38 * 9.38 * 20.34

20 11.74 * 11.7 8.73 * 8.32 23.98
15 12.88 * 11.3 11.89 * 7.88 8.60 * 7.05 26.21
10 18.86 * 16.46 14.66 * 10.72 11.88 7.63 8.83 * 6.42 27.38
5 22.38 * 15.26 16.25 10.15 11.58 7.36 9.42 * 6.18 27.63
0 13.46 * 13.46 * 24.06 * 14.62 15.8 9.76 11.36 7.15 9.96 6.3 26.98
-5 14.68 * 14.68 * 23.25 * 23.25 * 23.84 * 14.46 15.62 9.6 11.31 7.1 10.85 6.84 25.36
-10 25.05 * 25.05 * 30.32 * 28.61 21.77 * 14.62 15.74 9.7 12.96 8.13 22.57
-15 23.07 * 23.07 * 16.84 * 15.17 12.85 * 11.45 18.05
STANDARD CONFIGURATION
Metric
Boom : 5,700mm(HD) Arm : 2,900mm(HD) Without Bucket Shoe : 600mm Unit : 1,000kg
Option 2
A(m) 1.5 3 4.5 6 7.5 Max. Reach Metric
A(m)
B(m) Boom : 5,700mm(HD) Arm : 2,400mm(HD) Without Bucket Shoe : 600mm Unit : 1,000kg
7.5 4.88 * 4.88 * 4.25 * 4.25 * 6.20
6 5.33 * 5.18 3.96 * 3.68 7.31
A(m) 3 4.5 6 7.5 Max. Reach
4.5 5.84 * 5.01 5.37 3.48 3.90 * 3.11 7.99 B(m) A(m)
3 8.55 * 7.29 6.65 * 4.74 5.25 3.37 4.00 * 2.83 8.35 7.5 5.89 * 5.68 5.61
1.5 10.15 * 6.75 7.18 4.48 5.11 3.25 4.27 * 2.72 8.42 6 5.85 * 5.11 5.38 * 4.09 6.82
0 6.10 * 6.10 * 10.91 * 6.46 6.97 4.3 5.01 3.15 4.39 2.77 8.22 4.5 7.49 * 7.49 * 6.29 * 4.95 5.32 3.44 5.25 * 3.4 7.54
-1.5 6.66 * 6.66 * 10.55 * 10.55 * 10.81 * 6.38 6.89 4.23 4.99 3.13 4.78 3.01 7.73 3 9.23 * 7.15 7.04 * 4.7 5.23 3.36 4.79 3.08 7.92
-3 11.36 * 11.36 * 13.75 * 12.64 9.87 * 6.46 6.94 4.28 5.71 3.58 6.88 1.5 10.61 * 6.68 7.16 4.47 5.12 3.26 4.65 2.96 8.00
-4.5 10.46 * 10.46 * 7.64 * 6.7 5.83 * 5.06 5.50 0 11.05 * 6.48 7 4.33 5.05 3.2 4.79 3.04 7.79
-1.5 10.42 * 10.42 * 10.65 * 6.46 6.96 4.3 5.29 3.35 7.27
-3 12.58 * 12.58 * 9.37 * 6.59 6.87 * 4.39 6.21 * 4.09 6.35
Feet Unit : 1,000lb
-4.5 6.32 * 6.32 * 5.61 * 5.61 * 4.82
A(ft) 5' 10' 15' 20' 25' Max. Reach

B(ft) A(ft)

25 10.77 * 10.77 * 9.38 * 9.38 * 20.34

20 11.74 * 11.43 8.73 * 8.12 23.98
Feet Unit : 1,000lb

15 12.88 * 11.04 11.83 7.67 8.60 * 6.86 26.21 A(ft) 10' 15' 20' 25 Max. Reach
10 18.86 * 16.07 14.66 * 10.46 11.57 7.43 8.83 * 6.24 27.38 A(ft)
B(ft)
5 22.38 * 14.87 15.82 9.89 11.27 7.15 9.42 * 6 27.63
25 12.98 * 12.52 18.40
0 13.46 * 13.46 * 24.06 * 14.23 15.37 9.49 11.05 6.95 9.68 6.12 26.98
20 12.89 * 11.25 11.86 * 9.01 22.38
-5 14.68 * 14.68 * 23.25 * 23.25 * 23.84 * 14.06 15.19 9.33 10.99 6.9 10.55 6.64 25.36
15 16.50 * 16.50 * 13.87 * 10.9 11.72 7.59 11.58 * 7.51 24.75
-10 25.05 * 25.05 * 30.32 * 27.87 21.77 * 14.23 15.31 9.43 12.6 7.9 22.57
10 20.35 * 15.76 15.52 * 10.37 11.53 7.41 10.57 6.79 25.99
-15 23.07 * 23.07 * 16.84 * 14.78 12.85 * 11.16 18.05
5 23.40 * 14.73 15.78 9.86 11.29 7.19 10.25 6.54 26.25
0 24.37 * 14.28 15.42 9.55 11.13 7.04 10.55 6.7 25.56
1. LOAD POINT IS THE END OF THE ARM. : Rating Over Front
2. CAPACITIES MARKED WITH AN ASTERISK (*) ARE LIMITED BY HYDRAULIC CAPACITIES. -5 22.96 * 22.96 * 23.48 * 14.25 15.34 9.47 11.67 7.38 23.84
: Rating Over Side or 360 degree -10 27.73 * 27.73 * 20.67 * 14.52 15.14 * 9.69 13.69 * 9.03 20.84
3. LIFT CAPACITIES SHOWN DO NOT EXCEED 75 % OF MINIMUN TIPPING LOADS OR 87 % OF HYDRAULIC CAPACITIES.
4. THE LEAST STABLE POSITION IS OVER THE SIDE. -15 13.92 * 13.92 * 12.36 * 12.36 * 15.82
5. LIFT CAPACITIES APPLY ONLY TO THE MACHINE AS ORIGINALLY MANUFACTURED AND NORMALLY EQUIPPED BY THE MANUFACTURER.
6. THE TOTAL MASS OF MACHINE IS 20872 kg INCLUDED IN THIS MASS BOOM 5.7 m, ARM 2.9 m, 4115 kg COUTNERWEIGHT,
ALL OPERATING FLUIDS AND A 75 kg OPERATOR.
( THE TOTAL MASS OF MACHINE IS 46014.4112 lb INCLUDED IN THIS MASS BOOM 18' 8'', ARM 9' 6'', 9071.929 lb COUTNERWEIGHT,
ALL OPERATING FLUIDS AND A 165.345 lb OPERATOR.)
7. LIFT CAPACITIES ARE IN COMPLIANCE WITH ISO 10567.
LIFTING CAPACITY
Option 3 Option 5
Metric Metric
Boom : 5,700mm(HD) Arm : 2,400mm(HD) without bucket Shoe : 800mm Unit : 1,000kg Boom : 5,700mm Arm : 3,500mm without bucket Shoe : 800mm Unit : 1,000kg

A(m) 3 4.5 6 7.5 Max. Reach A(m) 1.5 3 4.5 6 7.5 Max. Reach

B(m) A(m) B(m) A(m)

7.5 5.89 * 5.81 5.61 7.5 3.59 * 3.59 * 6.87

6 5.85 * 5.23 5.38 * 4.19 6.82 6 4.32 * 3.74 3.40 * 3.40 * 7.89
4.5 7.49 * 7.49 * 6.29 * 5.07 5.46 3.53 5.25 * 3.5 7.54 4.5 5.34 * 5.25 5.00 * 3.66 3.37 * 2.94 8.52
3 9.23 * 7.33 7.04 * 4.82 5.38 3.45 4.93 3.16 7.92 3 11.73 * 11.73 * 7.77 * 7.7 6.21 * 4.98 5.42 * 3.53 3.47 * 2.7 8.85
1.5 10.61 * 6.86 7.35 4.6 5.26 3.35 4.78 3.05 8.00 1.5 9.58 * 7.1 7.13 * 4.69 5.31 3.39 3.70 * 2.6 8.92
0 11.05 * 6.66 7.19 4.45 5.19 3.29 4.92 3.13 7.79 0 7.36 * 7.36 * 10.71 * 6.72 7.22 4.47 5.18 3.27 4.10 * 2.63 8.74
-1.5 10.42 * 10.42 * 10.65 * 6.64 7.15 4.42 5.44 3.44 7.27 -1.5 6.49 * 6.49 * 10.34 * 10.34 * 10.97 * 6.56 7.09 4.36 5.11 3.21 4.45 2.82 8.28
-3 12.58 * 12.58 * 9.37 * 6.77 6.87 * 4.52 6.21 * 4.21 6.35 -3 10.09 * 10.09 * 14.91 * 12.82 10.40 * 6.58 7.08 4.36 5.16 3.25 7.49
-4.5 6.32 * 6.32 * 5.61 * 5.61 * 4.82 -4.5 14.79 * 14.79 * 12.32 * 12.32 * 8.79 * 6.75 6.29 * 4.49 5.87 * 4.27 6.25

Feet Unit : 1,000lb Feet Unit : 1,000lb

A(ft) 10' 15' 20' 25' Max. Reach A(ft) 5' 10' 15' 20' 25' Max. Reach
B(ft) A(ft) B(ft) A(ft)
25 12.98 * 12.82 18.40 25 7.92 * 7.92 * 22.54
20 12.89 * 11.52 11.86 * 9.24 22.38 20 9.53 * 8.23 7.50 * 7.50 * 25.87
15 16.50 * 16.50 * 13.87 * 11.17 12.04 7.79 11.58 * 7.71 24.75 15 11.77 * 11.58 11.03 * 8.08 7.44 * 6.48 27.95
10 20.35 * 16.16 15.52 * 10.64 11.85 7.61 10.86 6.97 25.99 10 25.85 * 25.85 * 17.12 * 16.98 13.69 * 10.97 11.95 * 7.79 7.65 * 5.94 29.04
5 23.40 * 15.12 16.21 10.13 11.61 7.39 10.54 6.72 26.25 5 21.13 * 15.65 15.71 * 10.35 11.7 7.47 8.15 * 5.73 29.28
0 24.37 * 14.68 15.85 9.82 11.45 7.25 10.86 6.89 25.56 0 16.24 * 16.24 * 23.60 * 14.81 15.91 9.86 11.41 7.21 9.04 * 5.8 28.67
-5 22.96 * 22.96 * 23.48 * 14.64 15.77 9.74 12 7.59 23.84 -5 14.32 * 14.32 * 22.81 * 22.81 * 24.18 * 14.47 15.63 9.61 11.27 7.08 9.82 6.21 27.16
-10 27.73 * 27.73 * 20.67 * 14.91 15.14 * 9.96 13.69 * 9.28 20.84 -10 22.24 * 22.24 * 32.88 * 28.25 22.93 * 14.5 15.62 9.6 11.37 7.17 24.57
-15 13.92 * 13.92 * 12.36 * 12.36 * 15.82 -15 32.61 * 32.61 * 27.15 * 27.15 * 19.38 * 14.87 13.88 * 9.91 12.93 * 9.41 20.50

Option 4
Metric
Boom : 5,700mm Arm : 3,500mm without bucket Shoe : 600mm Unit : 1,000kg
A(m) 1.5 3 4.5 6 7.5 Max. Reach

B(m) A(m)

7.5 3.59 * 3.59 * 6.87

6 4.32 * 3.64 3.40 * 3.32 7.89
4.5 5.34 * 5.13 5.00 * 3.57 3.37 * 2.86 8.52
3 11.73 * 11.73 * 7.77 * 7.52 6.21 * 4.86 5.32 3.44 3.47 * 2.62 8.85
1.5 9.58 * 6.92 7.13 * 4.57 5.16 3.3 3.70 * 2.52 8.92
0 7.36 * 7.36 * 10.71 * 6.54 7.02 4.35 5.03 3.18 4.03 2.55 8.74
-1.5 6.49 * 6.49 * 10.34 * 10.34 * 10.95 6.39 6.89 4.24 4.97 3.12 4.33 2.73 8.28
-3 10.09 * 10.09 * 14.91 * 12.48 10.40 * 6.4 6.89 4.23 5.01 3.16 7.49
-4.5 14.79 * 14.79 * 12.32 * 12.32 * 8.79 * 6.57 6.29 * 4.37 5.87 * 4.15 6.25

Feet Unit : 1,000lb

A(ft) 5' 10' 15' 20' 25' Max. Reach

B(ft) A(ft)

25 7.92 * 7.92 * 22.54

20 9.53 * 8.03 7.50 * 7.32 25.87
15 11.77 * 11.31 11.03 * 7.88 7.44 * 6.31 27.95
10 25.85 * 25.85 * 17.12 * 16.59 13.69 * 10.71 11.73 7.59 7.65 * 5.78 29.04
5 21.13 * 15.26 15.71 * 10.08 11.38 7.27 8.15 * 5.56 29.28
0 16.24 * 16.24 * 23.60 * 14.42 15.48 9.6 11.09 7.01 8.88 5.63 28.67
-5 14.32 * 14.32 * 22.81 * 22.81 * 24.14 14.08 15.2 9.34 10.95 6.87 9.54 6.03 27.16
-10 22.24 * 22.24 * 32.88 * 27.52 22.93 * 14.11 15.19 9.34 11.06 6.96 24.57
-15 32.61 * 32.61 * 27.15 * 27.15 * 19.38 * 14.48 13.88 * 9.64 12.93 * 9.15 20.50
LIFTING CAPACITY
Option 6 Option 7
Metric Metric
Boom : 8,500mm Arm : 6,200mm without bucket Shoe : 600mm Unit : 1,000kg Boom : 8,500mm Arm : 6,200mm without bucket Shoe : 800mm Unit : 1,000kg

A(m) 1.5 3 4.5 6 7.5 9 10.5 12 13.5 Max. Reach A(m) 1.5 3 4.5 6 7.5 9 10.5 12 13.5 Max. Reach

A(m) B(m) A(m)

B(m)
12 0.97 * 0.97 * 9.79 12 0.97 * 0.97 * 9.79
10.5 1.52 * 1.52 * 0.88 * 0.88 * 11.16 10.5 1.52 * 1.52 * 0.88 * 0.88 * 11.16
9 2.10 * 2.10 * 1.06 * 1.06 * 0.83 * 0.83 * 12.18 9 2.10 * 2.10 * 1.06 * 1.06 * 0.83 * 0.83 * 12.18
7.5 2.44 * 2.44 * 1.78 * 1.78 * 0.81 * 0.81 * 12.95 7.5 2.44 * 2.44 * 1.78 * 1.78 * 0.81 * 0.81 * 12.95
6 2.58 * 2.49 2.22 * 1.92 0.82 * 0.82 * 0.80 * 0.80 * 13.52 6 2.58 * 2.55 2.22 * 1.98 0.82 * 0.82 * 0.80 * 0.80 * 13.52
4.5 3.00 * 3.00 * 2.78 * 2.38 2.61 * 1.85 1.38 * 1.38 * 0.81 * 0.81 * 13.89 4.5 3.00 * 3.00 * 2.78 * 2.44 2.61 * 1.91 1.38 * 1.38 * 0.81 * 0.81 * 13.89
3 9.61 * 9.61 * 6.28 * 6.28 * 4.70 * 4.70 * 3.86 * 3.84 3.35 * 2.9 3.01 * 2.25 2.78 * 1.77 1.71 * 1.4 0.84 * 0.84 * 14.10 3 9.61 * 9.61 * 6.28 * 6.28 * 4.70 * 4.70 * 3.86 * 3.86 * 3.35 * 2.97 3.01 * 2.31 2.78 * 1.82 1.71 * 1.45 0.84 * 0.84 * 14.10
1.5 7.97 * 7.07 5.63 * 4.8 4.43 * 3.52 3.72 * 2.69 3.26 * 2.11 2.71 1.68 1.90 * 1.35 0.88 * 0.88 * 14.14 1.5 7.97 * 7.24 5.63 * 4.92 4.43 * 3.61 3.72 * 2.76 3.26 * 2.17 2.79 1.74 1.90 * 1.4 0.88 * 0.88 * 14.14
0 3.71 * 3.71 * 7.35 * 6.37 6.36 * 4.36 4.92 * 3.24 4.02 2.51 3.21 1.99 2.62 1.6 1.89 * 1.3 0.95 * 0.95 * 14.03 0 3.71 * 3.71 * 7.35 * 6.55 6.36 * 4.48 4.92 * 3.33 4.05 * 2.58 3.3 2.05 2.7 1.66 1.89 * 1.35 0.95 * 0.95 * 14.03
-1.5 3.56 * 3.56 * 4.48 * 4.48 * 7.09 * 6.05 6.82 * 4.09 5 3.04 3.87 2.37 3.11 1.89 2.56 1.54 1.56 * 1.27 1.04 * 1.04 * 13.74 -1.5 3.56 * 3.56 * 4.48 * 4.48 * 7.09 * 6.23 6.82 * 4.21 5.15 3.13 3.98 2.44 3.2 1.95 2.64 1.59 1.56 * 1.32 1.04 * 1.04 * 13.74
-3 4.54 * 4.54 * 5.46 * 5.46 * 7.73 * 5.94 6.73 3.95 4.87 2.92 3.77 2.27 3.04 1.83 2.52 1.5 1.18 * 1.18 * 13.29 -3 4.54 * 4.54 * 5.46 * 5.46 * 7.73 * 6.12 6.93 4.07 5.01 3.01 3.88 2.35 3.13 1.89 2.6 1.55 1.18 * 1.18 * 13.29
-4.5 5.55 * 5.55 * 6.57 * 6.57 * 8.84 * 5.96 6.69 3.91 4.82 2.87 3.72 2.23 3.01 1.8 2.51 1.49 1.37 * 1.37 * 12.64 -4.5 5.55 * 5.55 * 6.57 * 6.57 * 8.84 * 6.14 6.89 4.03 4.96 2.96 3.84 2.3 3.1 1.86 2.59 1.55 1.37 * 1.37 * 12.64
-6 6.64 * 6.64 * 7.85 * 7.85 * 8.75 * 6.07 6.66 * 3.95 4.83 2.88 3.73 2.24 3.03 1.82 1.67 * 1.58 11.75 -6 6.64 * 6.64 * 7.85 * 7.85 * 8.75 * 6.24 6.66 * 4.07 4.97 2.97 3.85 2.31 3.12 1.88 1.67 * 1.63 11.75
-7.5 7.85 * 7.85 * 9.36 * 9.36 * 7.85 * 6.26 6.08 * 4.06 4.86 * 2.96 3.81 2.31 2.57 * 1.9 2.20 * 1.89 10.58 -7.5 7.85 * 7.85 * 9.36 * 9.36 * 7.85 * 6.44 6.08 * 4.18 4.86 * 3.05 3.92 2.38 2.57 * 1.96 2.20 * 1.95 10.58
-9 8.73 * 8.73 * 6.49 * 6.49 * 5.09 * 4.26 4.04 * 3.12 3.07 * 2.47 3.05 * 2.46 9.02 -9 8.73 * 8.73 * 6.49 * 6.49 * 5.09 * 4.38 4.04 * 3.21 3.07 * 2.54 3.05 * 2.54 9.02

Feet Unit : 1,000lb Feet Unit : 1,000lb

A(ft) 5' 10' 15' 20' 25' 30' 35' 40' 45' Max. Reach
A(ft) 5' 10' 15' 20' 25' 30' 35' 40' 45' Max. Reach
B(ft) A(ft)
B(ft) A(ft)
40 2.13 * 2.13 * 32.12
40 2.13 * 2.13 * 32.12
35 3.34 * 3.34 * 1.94 * 1.94 * 36.61
35 3.34 * 3.34 * 1.94 * 1.94 * 36.61
30 4.62 * 4.62 * 2.33 * 2.33 * 1.83 * 1.83 * 39.96
30 4.62 * 4.62 * 2.33 * 2.33 * 1.83 * 1.83 * 39.96
25 5.38 * 5.38 * 3.92 * 3.92 * 1.78 * 1.78 * 42.49
25 5.38 * 5.38 * 3.92 * 3.92 * 1.78 * 1.78 * 42.49
20 5.69 * 5.63 4.90 * 4.35 1.81 * 1.81 * 1.77 * 1.77 * 44.35
20 5.69 * 5.49 4.90 * 4.24 1.81 * 1.81 * 1.77 * 1.77 * 44.35
15 6.60 * 6.60 * 6.13 * 5.38 5.74 * 4.2 3.04 * 3.04 * 1.79 * 1.79 * 45.58
15 6.60 * 6.60 * 6.13 * 5.24 5.74 * 4.08 3.04 * 3.04 * 1.79 * 1.79 * 45.58
10 21.20 * 21.20 * 13.85 * 13.85 * 10.37 * 10.37 * 8.52 * 8.52 * 7.39 * 6.55 6.64 * 5.09 6.12 * 4.02 3.78 * 3.19 1.85 * 1.85 * 46.25
10 21.20 * 21.20 * 13.85 * 13.85 * 10.37 * 10.37 * 8.52 * 8.47 7.39 * 6.38 6.64 * 4.95 6.12 * 3.9 3.78 * 3.09 1.85 * 1.85 * 46.25
5 17.57 * 15.97 12.40 * 10.84 9.76 * 7.96 8.20 * 6.09 7.18 * 4.79 6.15 3.83 4.18 * 3.08 1.95 * 1.95 * 46.40
5 17.57 * 15.58 12.40 * 10.58 9.76 * 7.75 8.20 * 5.93 7.18 * 4.65 5.97 3.71 4.18 * 2.98 1.95 * 1.95 * 46.40
0 8.17 * 8.17 * 16.21 * 14.44 14.02 * 9.89 10.84 * 7.35 8.92 * 5.69 7.29 4.52 5.96 3.65 4.17 * 2.98 2.09 * 2.09 * 46.02
0 8.17 * 8.17 * 16.21 * 14.05 14.02 * 9.62 10.84 * 7.14 8.87 5.53 7.08 4.39 5.78 3.53 4.17 * 2.87 2.09 * 2.09 * 46.02
-5 7.86 * 7.86 * 9.88 * 9.88 * 15.64 * 13.73 15.03 * 9.28 11.35 6.9 8.78 5.38 7.06 4.31 5.81 3.51 3.44 * 2.9 2.30 * 2.30 * 45.08
-5 7.86 * 7.86 * 9.88 * 9.88 * 15.64 * 13.34 15.03 * 9.01 11.03 6.7 8.53 5.22 6.85 4.17 5.64 3.39 3.44 * 2.8 2.30 * 2.30 * 45.08
-10 10.00 * 10.00 * 12.03 * 12.03 * 17.05 * 13.49 15.28 8.97 11.05 6.63 8.56 5.17 6.9 4.16 5.72 3.42 2.59 * 2.59 * 43.59
-10 10.00 * 10.00 * 12.03 * 12.03 * 17.05 * 13.1 14.85 8.71 10.74 6.43 8.31 5.01 6.7 4.03 5.55 3.31 2.59 * 2.59 * 43.59
-15 12.23 * 12.23 * 14.48 * 14.48 * 19.48 * 13.53 15.18 8.89 10.93 6.52 8.46 5.08 6.84 4.1 5.71 3.41 3.02 * 3.02 * 41.46
-15 12.23 * 12.23 * 14.48 * 14.48 * 19.48 * 13.14 14.75 8.62 10.62 6.32 8.21 4.92 6.63 3.97 5.53 3.29 3.02 * 3.02 * 41.46
-20 14.64 * 14.64 * 17.30 * 17.30 * 19.29 * 13.76 14.68 * 8.97 10.97 6.55 8.48 5.1 6.88 4.14 3.69 * 3.6 38.57
-20 14.64 * 14.64 * 17.30 * 17.30 * 19.29 * 13.37 14.68 * 8.71 10.65 6.35 8.23 4.94 6.68 4.01 3.69 * 3.48 38.57
-25 17.31 * 17.31 * 20.64 * 20.64 * 17.32 * 14.19 13.40 * 9.22 10.72 * 6.72 8.64 5.25 5.67 * 4.33 4.86 * 4.29 34.72
-25 17.31 * 17.31 * 20.64 * 20.64 * 17.32 * 13.8 13.40 * 8.95 10.72 * 6.52 8.39 5.09 5.67 * 4.19 4.86 * 4.16 34.72
-25 19.24 * 19.24 * 14.31 * 14.31 * 11.23 * 9.65 8.90 * 7.07 6.77 * 5.61 6.72 * 5.6 29.59
-30 19.24 * 19.24 * 14.31 * 14.31 * 11.23 * 9.39 8.90 * 6.87 6.77 * 5.44 6.72 * 5.43 29.59
STANDARD & OPTION
STANDARD EQUIPMENT OPTIONAL EQUIPMENT
Boom & Arm Safety
Some of optional equipments may be standard in some markets. Some of this optional equipment is not available in some markets. You must
• 5.7m Boom (Heavy duty) • Large handrails and step
check with the local DOOSAN dealer to know about the availability or to release the adaptation following the needs of the applications
• 2.9m Arm (Heavy duty) • Convex metal anti-slip plates
• Seat belt Boom & Arm Others
Hydraulic system • Hydraulic safety lock lever • 5.7m Boom • Piping option
• Boom and arm flow regeneration • Safety glass • 8.5m Boom - Piping for Crusher
• Boom and arm holding valves • Hammer for emergency escape • 2.4m Arm (Heavy duty) - Piping for Breaker
• Swing anti-rebound valves • Right and left rearview mirrors • 2.9m Arm - Piping for Quick clamp
• Spare ports (Control valve) • Travel alarm • 3.5m Arm - Piping for Rotating
• One-touch power boost • Battery protector cover (option) • 6.2m Arm • 700mm / 800mm / 900mm shoe
• Lower wiper
Cabin & Interior Others Safety • 60A/80A alternator
• Viscous cab mounts • Double element air cleaner • Boom and arm hose rupture protection valve • Fuel filler pump
• All weather sound suppressed type cab • Additional water separator • Overload warning device • Working Lights
• Air conditioner & Heater • Dry type pre cleaner • Cabin Top/Front guard (ISO 10262, FOGS standard) - 4-front / 2-rear on cabin
• Adjustable suspension seat with head rest and adjustable arm rest • Fuel filter • Travel & swing alarm - 2-front on cabin
• Pull-up type front window and removable lower front window • Dust screen for radiator/oil cooler • Rotating - 1 on counterweight
• Room light • Engine overheat prevention system • Rear lamp for number plate • Counterweight (3.8 Ton / 5.3 Ton)
• Intermittent windshield wiper • Engine restart prevention system • Hydraulic Oil
• Cup holder • Self-diagnostic system - Cold weather (VG32)
• Hot & Cool box • 60A Alternator (24V, 50 amps) Cabin & Interior - Normal (VG46)
• LCD color monitor panel • Electric horn • Air suspension seat - Tropical weather (VG68)
• E/G RPM control dial • Halogen working lights (frame mounted 1, boom mounted 2) • Rain Shield • Breaker filter
• AM/FM radio + MP3 (USB) • Hydraulic track adjuster • High seat Mount • Water separator with heater
• Remote radio ON/OFF switch • Track guards • Breaker pedal • Heavy duty under cover
• 12V,24V power socket • Greased and sealed track link • ROPS/FOGS Cabin • Short & Fixed track
• Serial communication port for laptop PC interface • Hydraulic oil tank air breather filter • Cabin front guard (Upper and lower guard) • Heavy duty & Fixed track
• Joystick lever with 3 switches • Long & Fixed track • Steel roof cover
• Additional mirror
 Doosan is
Since 1896, Doosan, the oldest
company in Korea, has evolved with its
people. The company grew up rapidly
for last 10 years with reputation. For
human-oriented vision, Doosan has
been building constructions, energy,
machines, infra structures globally. As
a global leader of infra structure,
Doosan continues its vision to make
human-oriented future.

First in Korea, Doosan self-developed

excavators in 1985 and continued
building versatile construction
machines including excavators, wheel
loaders, articulated dump trucks to
execute its human-oriented
philosophy. Doosan became a global
leader of heavy construction machine
industry by achieving global sales line,
producing line, and distribution line.
Along with large production bases in
Korea, China, USA, Belgium, Czech,
Doosan has 1400 dealer networks and
Doosan is providing reliable products
and trusted solutions for your stable
business at no risk.

DIPBE-01-2001

Doosan Infracore Co., Ltd.

489 (Hwasu-dong), Injung-ro, Dong-Gu,
Incheon, Korea (22502)
https://global.doosanequipment.com

Copyright 2020. Doosan Infracore. All rights reserved.

Materials and Specifications in the catalogue are subject to change without notice.