CL(B)T

754 (445 HP)

Automatic/Powershift
Hauling Transmission

SPECIFICATIONS
General Ra�ng+
Net input power (max) 445HP (332 kW)
Input speed (max) 2500 rpm
Net input torque (max) 1300 lb � (1764 Nm)

ROTATION
Input (viewed from input) Clockwise
Output (viewed from input) Clockwise (forward ranges)

MOUNTING
DIRECT REMOTE
SAE # 1 flywheel housing with flexdisc drive-cradle mounted Trunnion mount and one 6-hole SAE moun�ng pad each side of rear cover or drop box.
using engine flywheel moun�ng pad and one 6-hole SAE
moun�ng pad each side to rear cover or drop box.

TORQUE CONVERTER
Type Single stage, 3-element
Stall torque ra�o TC 497-2.72:1;TC 498-2.45:1
Automa�c lock—up clutch Effec�ve in all forward ranges and neutral

GEARING
Constant mesh, spur type, planetary CL(B)T 754
Type
Standard, straight through (only)

+Ra�ng may vary by voca�on. Consult AVTEC Marke�ng Department for specific informa�on.

CL(B)T 754 (445 HP) Automatic/Powershift Hauling Transmission 1

RANGE
1-5 Automa�c Ra�os*
First 5.18:1
Second 3.19:1
Third 2.02:1
Fourth 1.38:1
Fi�h 1.00:1
Reverse 9.93:1
*Gear ra�o does not include torque converter ra�o

CLUTCHES
Hydraulically-actuated,spring-released,oil-cooled mul�disk and wear compensa�ng.

SPEEDOMETER DRIVE
13/16-20 UNEF thread-through boss, heavy duty plug driven gear** customer supplied.

**Not supplied on transmission but is supplied by vehicle manufacturer.

CONTROL VALVE BODY

Hydraulically actuated control valve provides automa�c range selec�on in each drive posi�on as a func�on of vehicle speed.

POWER TAKE-OFF PROVISION (OPTIONAL)

Converter-driven (SAE 6-bolt)
Loca�on Top, le� side at 10 O’ Clock posi�on (as viewed from rear)
Drive gear ra�ng Intermi�ent-400 lb � (543 Nm); Con�nous-300 lb � (407 Nm)
Drive gear ra�o 1.00 x turbine speed (all ranges)
Engine-driven (SAE 8-bolt) on two loca�ons
Loca�ons Converter housing top moun�ng pad: 1 O' Clock posi�on (as viewed from rear)
Drive gear ra�ng Intermi�ent-260 hp (194 kW); Con�nous-200 hp (149 kW)
Drive gear ra�o 1 O' Clock-1.35 x engine speed; side moun�ng pad 8 O' Clock - 0.84 x engine speed

HYDRAULIC RETARDER (OPTIONAL)

Type Coupling type rotor between fixed stators
Capacity 365 HP (272 kW,913 lb � (1237 Nm) #2100 rpm rotor speed

DROP BOX (OPTIONAL)

Drop box available with 1:1 output; disconnects are available at all three loca�ons: B, C and D.

OIL SYSTEM
Transmission
OilType Hydraulic transmission fluid type C-4
Capacity (less external Lines) 9.5 US gal
(Std. pan) (36 litres)
Sump Integral
Filter External, remote mounted
Drop box
Capacity 2.5 litres (0.66 US gal)
Oil type Hydraulic transmission fluid C-4

2 CL(B)T 754 (445 HP) Automatic/Powershift Hauling Transmission

SIZE (TYPICAL CONFIGURATION)
Straight Through Drop Box
Length 54.61 in (1387 mm) 62.5 in (1588 mm)
Width 24.5 in (622 mm) 24.5 in (622 mm)
Height 26.1 in (663 mm) 37.7 in (958 mm)
Weight basic model dry 1146 lb ( 520 kg) 1697 lb (770 kg)
With engine PTO and Input Retarder Add 310 lb (140 kg) to weight

CL(B)T 754 (445 HP) Automatic/Powershift Hauling Transmission 3

CUSTOMER BENEFITS
• Design Adaptability
• Smooth, Fast, Easy Opera�on
• High Produc�vity
• Greater Reliability
• Lower Opera�ng Cost
• Reduced Maintenance Cost
• Increased Availability
• Improved Operator Efficiency

CL(B)T 754 Transmission Cut sec�on

DESIGN FEATURES AND OPTIONS

• Choice of two range selec�on versions SCAAN SPECIFICATION ASSISTANCE
• Automa�c upshi�ing and downshi�ing in all ranges with
hold in each range and deep reverse ra�o To be sure that you get the most efficient engine
• Automa�c upshi�ing and downshi�ing in all ranges above transmission matching for your opera�on, with your
second with hold in each range and 1st manual preferred vehicle, AVTEC offers SCAAN.
• Provision for mechanical or pneuma�c shi� modula�on
control SCAAN stands for System for Computerized
• Provision for engine-driven and / or converter-driven power Applica�on Analysis and helps eliminate guesswork
takeoff from vehicle buying decisions. It can compute a wide
• Inhibitors to prevent harmful downshi�s or reverse shi�s variety of vehicle performance parameters. SCAAN
• Lockup clutch in all ranges for maximum fuel economy will also check your powertrain specifica�ons against
• Choice of converters to match wide range of diesel engines AVTEC voca�onal experience to ensure sa�sfactory
• Provision for neutral start switch; reverse signal switch; vehicle performance. SCAAN is user friendly.
• High range signal provision, lock-up signal provision Op�onal Interac�ve opera�on allows vehicle configura�ons to
drop box configura�on be quickly evaluated to ensure op�mized powertrain
• Five op�onal transfer gear housing (see rear view with drop selec�on.
box)
• Out disconnects available in three loca�ons on the drop box
model (flange posi�ons B, C and D) PARTS AND SERVICE SUPPORT
• Op�onal manual/automa�c controls
• Prompt Professional Service
• Complemen�ng parts availability is AVTEC’s firm
commitment to provide fast economical service
APPLICATIONS
• Rear Dumper
• Oilfield Mud Pump
• Mobile Servicing Rig
• Terminal Tractor
• Crane Carrier
• Scraper
• Water Sprinkler Cemen�ng Unit
• C Crane
• Well Killing Pump

AVTEC Limited (CK Birla Group) Poonapalli Village, Mathagondapalli Post, Hosur-635 114. Tamil Nadu, India.
Tel: +91 (4344) 405208/289/352/354 (Marke�ng), 405270/268 (Parts and Sales Admin), 405242 (Service) I Email: marke�[email protected] I Website: www.avtec.in
Informa�on and specifica�ons are subject to change without prior no�ce or obliga�on. For more informa�on visit our website.

4 CL(B)T 754 (445 HP) Automatic/Powershift Hauling Transmission