Preliminary Issue

ADU4521R3v06
DXX-1710-2690/1710-2690-33/33-21i/21i-M/M-R
EasyRET 2H 4-Port Antenna with Integrated RCUs -1.5m

Antenna Specifications
Electrical Properties
2 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable , each band separately
Gain (dBi) 20.2 20.5 20.5 20.8
Side lobe suppression for first side
> 16 > 16 > 16 >16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 36 34 33 32
Vertical 3dB beam width (°) 7.0 6.3 5.5 5.0
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 25
Front to back ratio, ± 30° (dB) > 25
Cross polar ratio at boresight (dB) > 15
Max. power per input (W) 250 (at 50℃ ambient temperature)
Total power (W) 700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

Mechanical Properties
106
Antenna dimensions (H x W x D) (mm) 1399 x 449 x 196
Packing dimensions (H x W x D) (mm) 1640 x 535 x 240
Antenna weight (kg) 19.5
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 30.6 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey

1273

1399
Operational temperature (℃) -40 .. +65
Frontal: 400 (at 150 km/h)
Wind load (N) Lateral: 235 (at 150 km/h)
Maximum: 525 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 4 x 4.3-10 Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 16° 2.1 kg ASMDT0D01

1
 Preliminary Issue

ADU4521R3v06
DXX-1710-2690/1710-2690-33/33-21i/21i-M/M-R
EasyRET 2H 4-Port Antenna with Integrated RCUs -1.5m

Integrated RET Specifications

Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching
function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWxxxx......Ly1
HWxxxx…..Ry2
y - Yellow
L - Left array R - Right array

Pattern sample for reference

1710 - 2690 MHz

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 2 Issue: 2019-12-11