Scribd
Upload
139 views1 page

Dual-Band Panel Dual Polarization Half-Power Beam Width

This document provides specifications for a dual-band panel antenna that operates in the frequency ranges of 806-960 MHz and 1710-2180 MHz. The antenna has dual polarization and a 65 degree half-power beamwidth. It has a gain between 16.2-18.7 dBi across the frequency bands and can be tilted between 2 and 14 degrees. The antenna has 50 ohm impedance, less than 1.5 VSWR, over 30 dB intrasystem isolation, and over 35 dB intersystem isolation between bands. It supports a maximum power of 800W at 50C ambient temperature.

Uploaded by

Евгений Грязев
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
139 views1 page

Dual-Band Panel Dual Polarization Half-Power Beam Width

This document provides specifications for a dual-band panel antenna that operates in the frequency ranges of 806-960 MHz and 1710-2180 MHz. The antenna has dual polarization and a 65 degree half-power beamwidth. It has a gain between 16.2-18.7 dBi across the frequency bands and can be tilted between 2 and 14 degrees. The antenna has 50 ohm impedance, less than 1.5 VSWR, over 30 dB intrasystem isolation, and over 35 dB intersystem isolation between bands. It supports a maximum power of 800W at 50C ambient temperature.

Uploaded by

Евгений Грязев
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Dual-band Panel 806 – 960 1710 –2180

Dual Polarization X X
Half-power Beam Width 65° 65°

XXPol Panel 806–960/1710–2180 65°/ 65° 16.5/18.5dBi 2°–14°/4°–14°T


Type No. 800 10485
Frequency range 806–960 1710–2180
806 – 866 MHz 824 – 896 MHz 880 – 960 MHz 1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2180 MHz
Polarization +45°, –45° +45°, –45° +45°, –45° +45°, –45° +45°, –45° +45°, –45°
Average gain (dBi) 16.2 ... 16 ... 15.7 16.3 ... 16.1 ... 15.8 16.4 ... 16.2 ... 15.8 18 ... 18.2 ... 17.7 18.4 ... 18.5 ... 17.8 18.7 ... 18.6 ... 18
Tilt 2° ... 8° ... 14° 2° ... 8° ... 14° 2° ... 8° ... 14° 4° ... 9° ... 14° 4° ... 9° ... 14° 4° ... 9° ... 14°
Horizontal Pattern:
Half-power beam width 68° 67° 65° 66° 64° 60°
Front-to-back ratio (180°± 30°) > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
Cross polar ratio Typically: Typically: Typically: Typically: Typically: Typically:
Maindirection 0° 25 dB 25 dB 25 dB 20 dB 20 dB 21 dB
Sector ±60° > 10 dB > 10 dB > 10 dB > 10 dB > 10 dB > 10 dB
Vertical Pattern:
Half-power beam width 10° 9.7° 9.3° 5° 4.7° 4.5°
Electrical tilt 2°– 14°, continuously adjustable 4°– 14°, continuously adjustable
Sidelobe suppression for first 2° ... 8° ... 14° T 2° ... 8° ... 14° T 2° ... 8° ... 14° T 4° ... 9° ... 14° T 4° ... 9° ... 14° T 4° ... 9° ... 14° T
sidelobe above main beam 17 ... 17 ... 15 dB 17 ... 17 ... 16 dB 17 ... 17 ... 16 dB 20 ... 18 ... 15 dB 19 ... 18 ... 15 dB 18 ... 17 ... 15 dB

Impedance 50 Ω
VSWR < 1.5
Isolation: Intrasystem > 30 dB
Isolation: Intersystem > 35 dB (806–960 // 1710–2180 MHz)
1800/2000
800/900 –

Intermodulation IM3 < –153 dBc (2 x 43 dBm carrier)


XXPol

Max. power per input 400 W (at 50 °C ambient temperature) 250 W (at 50 °C ambient temperature)
Total power 800 W (at 50 °C ambient temperature) 500 W (at 50 °C ambient temperature)
Input 4 x 7-16 female (long neck)
Connector position Bottom
Adjustment mechanism 2 x, Position bottom, continuously adjustable
Wind load (at 150 km/h) Frontal / lateral / rearside: 720 / 350 / 900 N
Height/width/depth 2038 / 262 / 139 mm

1710 – 2180 806 – 960 806 – 960 1710 – 2180


–45° –45° +45° +45°

7-16 7-16 7-16 7-16

102 Mounting accessories are not included in the scope of delivery (see page 189 and 196)

You might also like