14 UL / FM Valves 15
Grooved Butterfly Valve Double Eccentric Grooved
For Fire Sprinkler System
For Fire Sprinkler System
with Tamper Switch Butterfly Valve (XD382X)
(XD381X), UL Listed / FM
Approved
MATERIAL SPECIFICATION MATERIAL SPECIFICATION
Part No. Part Standard Specification Options Part No. Part Standard Specification Options
1 Upper Stem Stainless Steel AISI 304, AISI 316, AISI 420, AISI 431
1 Valve Body ASTM A536, 65-45-12
2 O-Ring NBR EPDM
2 Disc ASTM A536, 65-45-12+EPDM ASTM A536, 65-45-12+NBR
3 Ringht the body ASTM A536, 65-45-12
3 O-Ring NBR EPDM 4 Disc AISI 316
XD382X
XD381X 4 Stem Stainless Steel AISI 304, AISI 316, AISI 420, AISI 431 5 Left the body ASTM A536, 65-45-12
6 O-Ring NBR EPDM
5 O-Ring NBR EPDM • Design Standard: MSS SP-67
7 Sealing ring EPDM NBR
6 Stem Stainless Steel AISI 304, AISI 316, AISI 420, AISI 431 • Connection Ends: Groove to AWWA C606 8 Lower Stem Stainless Steel AISI 304, AISI 316, AISI 420, AISI 431
• Design Standard: MSS SP-67
7 Signal Gear Box ASTM A536, 65-45-12 • Top Flange Standard: ISO 5211 9 Shaft sleeve AISI 304+PTFE
• Connection Ends: Groove to AWWA C606
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list. Stem drive by keys, parallel or diagonal square or flat head 10 O-Ring NBR EPDM
• Top Flange Standard: ISO 5211
• Working Pressure: 300PSI 11 Stuffing box ZcuSn5pb5zn5
Stem drive by keys, parallel or diagonal square or flat head
175PSI, 200PSI and 250PSI available upon request 12 O-Ring NBR EPDM
• Working Pressure: 300PSI 13 Gear Box ASTM A536, 65-45-12
SWITCH WIRING DIAGRAM • Temperature Range: 0℃- 100℃
175PSI, 200PSI and 250PSI available upon request
Open (Red) • Coating: Fusion Bonded Epoxy Coating in accordance with Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
• Temperature Range: 0℃- 100℃
Common (White) Closed (Black)
ANSI/AWWA C550 or painting upon request
Fire Alarm Control End of Line Resistor
• Coating: Fusion Bonded Epoxy Coating in accordance with Panel Supervisory Circuit or Next Device
ANSI/AWWA C550 or painting upon request
Actuator Case Ground (Yellow/Green Double Color) DN Dimensions(mm)
Inch mm A B C ØD1 ØD2 E F G G1 ØM H H1 H2 L
Open (Yellow) 2" 50 81 15.88 7.93 60.3 57.15 36.5 46 96.8 126.8 125 202.5 127 93 75
Closed (Blue) 2.5" 65 96.8 15.88 7.93 73.0 69.09 45 53.3 108 138.0 125 202.5 127 93 75
Common (Green) Aux. Device
Voltage Source
(Bell or Horn) 3" 80 96.8 15.88 7.93 88.9 84.94 45 59.7 114.3 144.3 125 202.5 127 93 75
4" 100 115.8 15.88 9.53 114.3 110.08 55.4 73.2 133.4 163.4 125 202.5 127 93 75
5" 125 147.6 15.88 9.53 141.3 137.03 65.5 84.8 158.8 188.8 125 202.5 127 93 75
6" 150 147.6 15.88 9.53 168.3 163.96 65.5 97.3 171.5 201.5 225 215 139.5 93 75
8" 200 133.4 19.05 11.10 219.1 214.40 59.2 127 203.2 233.2 225 273 197.5 93 75
DN Dimensions(mm) 10" 250 158.8 19.05 12.70 273.1 268.28 76.2 155.7 247.7 277.7 225 273 197.5 93 75
Inch mm A B C ΦD ΦF ΦG L1 L2 L ΦK H H1 H2 H3 J ΦM Φ2 ISO 5211 12" 300 165.1 19.05 12.40 323.9 318.29 76.2 181.1 273.1 303.1 225 298 202.5 97.5 87
2" 50 89 65 81 50.3 60.3 57.15 15.88 7.93 32 90 208 151 65 108 147 150 14 F07
2.5" 65 102 71 97 60.8 73.0 69.09 15.88 7.93 32 90 208 151 65 108 147 150 14 F07
3" 80 109 81 97 76 88.9 84.94 15.88 7.93 32 90 208 151 65 108 147 150 14 F07
4" 100 128 95 116 98.5 114.3 110.08 15.88 9.53 32 90 208 151 65 108 147 150 16 F07
5" 125 141 111 148 122.6 141.3 137.03 15.88 9.53 32 90 208 151 65 108 147 150 16 F07
6" 150 153 133 148 148 168.3 163.96 15.88 9.53 32 90 208 151 65 108 147 150 20 F07
8" 200 184 164 133 199 219.1 214.4 19.05 11.10 45 125 298 223 77 121 184 200 26 F10
10" 250 216 196 159 252 273.0 268.28 19.05 12.70 45 125 298 223 77 121 184 200 26 F10
12" 300 254 226 165 300.5 323.9 318.29 19.05 12.70 45 125 299 224 77 121 184 250 28 F10
Note: Valve must not be installed with disc in full open position. Disc must be partly closed so that no part is protruding beyond end of valve body.
