100% found this document useful (1 vote)
3K views2 pages

Job Safety Analysis (Jsa) : Title of Activity / Work: DG Operation

This document provides a job safety analysis for operating a diesel generator. It identifies several potential hazards including emissions, noise, rotating parts, defective equipment, lack of safe access or platforms, high temperatures, diesel splashing, and fire. Control measures are outlined to mitigate each hazard, such as requiring work permits, regular inspections, preventative maintenance, safeguarding rotating parts, using lockout/tagout procedures, providing proper platforms and PPE. The document emphasizes taking a risk-based approach and complying with all safety requirements and regulations.

Uploaded by

ba ratnaparkhe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
3K views2 pages

Job Safety Analysis (Jsa) : Title of Activity / Work: DG Operation

This document provides a job safety analysis for operating a diesel generator. It identifies several potential hazards including emissions, noise, rotating parts, defective equipment, lack of safe access or platforms, high temperatures, diesel splashing, and fire. Control measures are outlined to mitigate each hazard, such as requiring work permits, regular inspections, preventative maintenance, safeguarding rotating parts, using lockout/tagout procedures, providing proper platforms and PPE. The document emphasizes taking a risk-based approach and complying with all safety requirements and regulations.

Uploaded by

ba ratnaparkhe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

JOB SAFETY ANALYSIS (JSA) Doc. No. ANX-1 of BG-06874IN (JSA) , Rev.

Title of Activity / Work: DG Operation Doc. Rev. Date 13-Jul-16

Name of Project Site/Office: Job No. :


Location : PTW No.:
Name of Contractor: JSA No.: TEIPL/JSA/024
Date of JSA Preparation: JSA PART A:- 13-Jul-16 JSA PART B :- Activity / Work Location Name:

Compliance? Yes /
Sl. No. Subactivity / Steps Hazard Effect Control Measures Responsibility No Remarks

PART A:- STANDARD JSA


1 DG Operation Emission from DG Skin and eye irritation, cough , Take required work permit(s). Execution Engineer & Job
minor breathing problems Supervisor; HSE
Regular Inspection of DG. -Monitoring & Training
Run DG only when needed.
DG stack height shall be as per Environment Protection Rules.
Noise Prolonged exposure for may Take required work permit(s).
years can permanent / partial
hearing loss and DG with full acoustic enclosure shall be provided.
psychological imbalance ; Regular Inspection of DG.
severe discomfort Preventive maintenance of DG.
Ear protection must be worn by persons exposed to noise hazard at site. Monitor
noise as per BOCW Rules / Factories Rules.
Rotating Parts Entanglement may cause Take required work permit(s). LOTO permit shall be followed during servicing &
severe injury, disability or maintenance of DG.
fatality
All rotating parts must be properly guarded. Keep DG closed with lock and key
arrangement.

Defective DG, Tools,Wires, hoses, & Electric Shock , fire / explosion Issue LOTO permit system before DG Maintenance / Repair.
accessories may cause fatality or severe
injury Inspect Tools,Wires, hoses, & accessories before operation and maitenance.
Practice preventive maintenance program. Replace/repair defective
Tools,Wires, hoses,equipment
Keep fire fighting & accessories . extinguisher , fire sand buckets near DG.
like fire

Use required PPEs including electrical gloves.


No or inadequate Work Access / Platform to Fall of person may cause Issue height work permit if work height is >1.8 m.
work above DG fatality or severe injury
Provide proper platform and access to work above DG.
High Temperatures and Hot Surfaces Severe burn injury Take required work permit(s).
Keep hands away from Hot surface.Do not touch them with bare hand. Let it
cool first.

Barricade work area & Display the Warning Signs like "Hot Surfaces Do not
Touch"
Use full sleeves & use of leather hand gloves.
Pay attention on work.
Diesel splash Diesel may splash on face may Take required work permit(s).
cause sever eye or skin
irritation. Pour fuel/oil in DG at controlled rate.
Use safety goggle & face shield, rubber hand gloves.
Fire may cause severe burn Provide fire extinguishers near diesel storage.
injury or fatality.
Display "No Smoking" Sign.
Emergency response plan.
PART B:- LOCATION SPECIFIC JSA

1 of 2
Compliance? Yes /
Sl. No. Subactivity / Steps Hazard Effect Control Measures Responsibility No Remarks

Note:

Prepared by: Reviewed by: Approved by:

Note: This is standard JSA prepared based on general hazards. Site has to review this JSA & Update considering process involved, site & work location condition, equipments/machines/ tools use, people involved and activities near by job location.

2 of 2

You might also like