Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 11:04:09 BST 2006, Uncontrolled Copy, (c) BSI BRITISH STANDARD Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 1: Non-alloy and alloy steel tubes Thesuropean Standard PNq0296-1:2008)has thesstatus ofa Britieh Standaré ON as 8% ( NO COPYING WITHOUT BSI PERMISSION EXCEPT §8 PERMITTED BY COPYRIGHT LAW BS EN 10296-1:2003 4 ¥ British StandardsBS EN 10296-1:2003 National foreword ‘This British Standard is the official EEN 10296-1:2003. It supersedes BS 632: 123-2 will be withdrawn. Together with BS EN 103 EN 10305-5 it superseded BS 6323-5:1982, which will be withdrawn upon publication of the three standards. Together with BS EN 10296-2, BS EN 1027. IRS EN 10305-1, BS EN 10305.2, BS EN 10805-3, BS EN 10305-4 BS EN 10305-5 and BS EN 10305-6 it, will supersede BS 6323-1:19 will be withdrawn upon publication of the other standards. ‘The UK participation in its preparation was entrusted to Technical Committee ISEI8, Steel pipes. which has tie responsibility to: led Copy, (c) BSI which — aid enquirers to understand the text; — present to the responsible international/Buropean committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed — monitor related international and Huropean developments and promulgate them in th» UK ‘A list of organizations represented on this committee ean be obtained on request fo its secretary Cross-references The British Standards which implement international or European Publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index’ or by using the “Search” facility of the BST Electronic Catalogue or of British ‘Standards Online. ‘This publication does not purport to include all the necessary provisions of a contract, Users are responsible for its eorreet application. Compliance with a British Standard does not of itselfeonfer immunity from legal obligations. —— PhkescadeRaim? Summary of pages Stratogy om mitgecn This document comprises a front cover, an inside fronteover, the EN title page, 2A duno 20%, pages 2 to 29 and a back cover. The BSI copyright date displayed if this document indicates when the document wassast 1s5uede Amendments issued since publication Amd, No Date Comments Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 11:04:09 BST 2006, Uncontr © BSI 24 June 2008led Copy, (c) BSI Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 11:04:09 BST 2006, Uncontr EUROPEAN STANDARD EN 10296-1 NORME EUROPEENNE EUROPAISCHE NORM June 2003 1S 77.140.75 English version Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy stee! tubes “Tubes forts soucés en acer pour ullisation en mécarique Geoschweiitekrlstormige Stairohre for der ‘générale et en construction mécanique - Conditions Maschinenbau und allgemeine technische Anwendungen - ‘techniques de raison - Partie 1: Tubes en aciernon aié Technische Liefebedingungen - Teil 1: Rohre aus et alié unlegierten und legieren Stahlen This European Standard was approved by CEN on 20 February2003, (CEN membors are bound to comply wth the CEN/CENELEC Internal Fgulaions which stipulate the conditions for giving tis European ‘Standard the status ofa national stardard without ay alteratior. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appicaton tothe Management Centre orto any CEN member. ‘This European Standard exists in three official versions (Erqlish, French, German). A version in any other language made by translation Under the responsibilty of a CEN member into ts own anguage and noted to the Management Centre has the same status as the oficial version. CCN members ae the national standards bocic> of Austia. Dasiu-, Cxoch Mepublie, Dermat, Tinland, France, Gsrmary; Oreecs ‘Hungary, losland, Keland,Haly, Luxembourg, Walla, Nethriands. Noway, Portugal, Slovakia, Span, Sweden, Switzerland and United Kingdom aan “OROPEAN COMBATFEE FOR STANDARDIZATION Comin EUROPEEN DE NORMALISATION EUROBAISCHES KOMITEE BUR NORMUNG Management Cents fe Stassart, 968-1050 Brussels Joitaton in any form and by any nears reserved Ft. No, EN 10296-12008 & N national Members.led Copy, (c) BSI Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 11:04:09 BST 2006, Uncontr EN 10296-1:2003 (E) Contents Page Foreword. «3 1 Scope ... A 2 Normative reterences .. 4 3 5 4 6 5 6 5.1 6 52 Designation. 6 6 —_ Information to be supplied by the purchaser. 6 6:1 Mandatory information m..6 62 Options. ay 63 Example of an order 7 Manufacturing process .. 7.1 Steelmaking process... 72 Deoxidation process. 7.3 Tube manufacture and delivery conditions ... 8 Requirements. 4: 81 General. o 2 Chemical campasition 3 83 Mechanical properties. a 84 Appearance and soundness. 13 85 Straightness ......... cases 14 86 End preparation. 14 87 Dimensions, masses, tolerances and sectional properties 14 9 Inspection 91 Types of inspection 92 Inspection documents. 93 Summary of inspection and testing 10 Sampling. 10.1 Frequency of tests 10.2 Preparation of samples and test 1 Test methods.. 11.1 Tensile test on the parent materi 23 11.2 Transverse tensile test on the weld.. 23 11.3 Fiattening test. 23 11.4 _ Drift Expanding Test. 23 11.5 Bend'test on full section tube. 24 116 Weld Bend Test 24 11.7 Impact test 24 11.8 Leak tightness test ses... 25 11.9 Dimensional inspection. 25 14.10 Vigual examination smu an 11.11 Noneéestructive testing of the weld. 11.12 Retests, sorting and reprocessing 12 Marking 4 26 13 Protection ws ms os 26 ‘Annex A (informative) Typical range of dimensions for tube manufacturing processes. ‘Annex B (normative) Formulae for calculation of nominal sectional properties Bibliography .09 BST 2006, Uncontrolled Copy, (c) BSI _- no ctayfapty EN 10296-1 * yeh lela fel cur) COUN Alte cps meQO sO AED en TENT www.emk.bz [email protected] CranjapT npepocrasnen McKAIOUNTeNbHO ANA O3HakOMNeHHAled Copy, (c) BSI institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 11:04:09 BST 2006, Uncontr EN 10296-1:2003 (E) 1 Scope This Part of EN 10296 specifies the technical delivery conditions for electric welded, laser beam welded and submerged arc welded tubes of citcular cross section made of non-alloy and alloy steels for mechanical and general engineering purposes. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the Publication referred to applies (including amendments). EN 910, Destructive tests on welds in metallic materials - Bend tests. EN 10002-1, Metallic materials - Tensile testing - Part 1: Method of test at ambient temperature. EN 10020, Definition and classification of grades of stool EN 10021, General technical delivery requirements for stee! and iron products. FN 19097-1, Dasignatin systoms far staal - Part 1: Stool ramos, prineipal symbals EN 10027-2, Designation systems for steal - Part 2: Numerical systern. EN 10045-1, Metallic materials - Charpy Impact test - Part 1: Test method. EN 10052, Vocabulary of heat treatment terms for ferrous products. PrEN 101681), Stee! products - Inspection documents ~ List of information and description. EN 10204, Metallic products - Types of inspection documents. EN 10220, Seamless and wolded stool tubes ~ Dimensions and masses per unit longth. EN 10232, Metalic materials - Tube (in ull section) - Band test. EN 10233, Metallic materials - Tube - Flattening test EN 10234, Metallic materials - Tube - Drift expanding test EN 10246-1, Nondestructive tasting of Sige! tubes... Parie1: Automatic, lechomagaotic testing of seamioss and welded (except submerged are-welced) ferromagnetic stccl tubes for venfication of hydraulic leak-tightness. EN 10246-8, Non-destructive testing of stoo! tubes = Part 3!Automatic eddy current testing of seamless and welded foxcopt cubmerged arc-woldad) steel tubos for the detadtion of importoctions: EN 10246:8, Non-dé8tructive fasting of\stee! tubes - Patt| 6: Automatie full paripheral magnetic transcucer/ux leakage tosting of Seamless and wolced (except submeérgc4 are-wolcad) ferromagnetic stoel tubes farthe detection of longitudinal imperfections. EN 10246-7, Non-destructive testing of stee! tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal imperfections. 1) In preparation; until this documents published as a European Standard, a corresponding national standard should be agreed atthe time of ‘enquiry ard order. 4