0% found this document useful (0 votes)
2K views2 pages

EN ME600 Infusion Pump

This document provides information about an infusion pump. It has a 4" LCD display with large font and an ergonomic interface that makes it easy to adjust and monitor parameters to reduce mistakes. It has various modes for different applications and can infuse from 0.1 to 1500 ml/hr, satisfying requirements for neonatal care. The pump is lightweight at 1.8kg and has an 11.1V DC power supply with optional nurse call interface.

Uploaded by

Mohammed Mudesir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
2K views2 pages

EN ME600 Infusion Pump

This document provides information about an infusion pump. It has a 4" LCD display with large font and an ergonomic interface that makes it easy to adjust and monitor parameters to reduce mistakes. It has various modes for different applications and can infuse from 0.1 to 1500 ml/hr, satisfying requirements for neonatal care. The pump is lightweight at 1.8kg and has an 11.1V DC power supply with optional nurse call interface.

Uploaded by

Mohammed Mudesir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Easy to use

Horizontal door clip for easier close and open the door.

4” LCD display with big font

Ergonomics operation interface make it easy to adjust and monitor the parameters so as to reduce

mistake operation.

Rate Mode, Drop Mode and Time Mode for wide range of applications.

Micro infusion speed 0.1ml/h up to high speed 1500ml/h satisfies special clinic scenario including require-

ments for Neonatal.

Software adjusting function suit for any brand of infusion sets.

Automatic light up while door was opened, easy to operate at night.

11.1 V DC power supply, nurse call interface available.

Light weight: 1.8Kg.


ME600 Infusion Pump
0197

Shenzhen Comen Medical Instruments Co., Ltd. P/N:EN-ME600-4P-20190620-V1.1

Add: No.2 of FIYTA Timepiece Building, Nanhuan Avenue, Gongming Sub-district,Guangming New District, Shenzhen, 518106, Guangdong.China
Tel:+86-755-2640 8879 400-700-9488 Fax:+86-755-2643 1232 Website: en.comen.com E-mail: [email protected]
Constant innovation makes our infusion pump More safety

More precise, more safety and easier to use LED alarm lamp, infusion state can be seen from a long distance.

Variety of audible and visible alarms to guarantee safety infusion.

Ultrasound probe can detect 25ul bubble to

prevent it from entering into human body and


More precise leading to aeroembolism; separate design make

the tube installation easier and also reduce the


Sophisticated motor and dual detectors guarantee infusion
risk of tube damage.
precision and stability.
Intelligent pulse compensation technology and heating
technology ensured the consistency of long time infusion rate.
Patented anti-bolus system to reduce significantly

bolus after occlusion sudden release.


Intelligent pulse compensation technology is to
Automatic detect door closing situation can effec-
compensate infusion fluctuation and accurately
tively prevent drug flowing and protect the tube.
adjust the infusion speed to realize safety and

stable infusion.

The infusion tube will become harden and slow

to rebound when under low temperature, which

lower down infusion precision in clinic application.

Intelligent heating technology is able to provide

adequate temperature for infusion system from High precision pressure sensor is able to detect down to 50mmHg within 1ms,
25℃~40℃ with over temperature protection, alarm will be triggered once blocking happens.
alleviate discomfort of patient. Dual CPU monitors the whole infusion process in real time.

Built-in drip sensor to control fluids flux.

800 infusion records and last configuration memory.


High precision infusion: (accuracy) < ±3%.
Built-in Lithium battery, over 8 hours working time after fully charged.

You might also like