Manual Call Points
Intelligent/Addressable Devices
General
Notifier addressable Manual Call Points
(MCP’s) are designed to be used as a
component of a fire control system.
These MCP’s are designed for use on the two
wire communication circuit providing both
signalling of an alarm to the fire indicator
panel and local LED indication of activation.
FSM500K
This MCP is designed for internal use and an
optional mounting box is available for ease of
mounting and termination of cabling.
The glass filament is laminated to prevent any
physical damage to the person operating the FSM500K
device.
Features
• CSIRO Approved
• Two wire connection for easy installation
• Suitable for flush mounting or surface
mounting
• Simple rotary decade setting
• Integral LED controlled from panel
WCP-5A-R
This MCP is designed for external use and
comes complete with a mounting box for ease
of installation and termination of cabling.
Features
• CSIRO Approved
• Two wire connection for easy installation
• Sealed to IP67.
WCP-5A-RSG
• Anti-tamper facility. Approvals
• Enhanced aesthetics and compact
design. FSM500K
• Unique ‘Plug & Play’ installation concept. CSIRO ActivFire listed to EN 54-11
• Total ‘Flex-Ability’ in the choice of (Type A):2001 afp-2259
operating element.
• Simple rotary decade setting WCP-5A-RSG
• Integral LED controlled from panel CSIRO ActivFire listed to EN 54-11
(Type A):2001 afp-2261
Page 1 of 2 DOC-02-088
Specification
FSM500K
Operating Voltage: 15 - 32VDC
Current Rating:
Standby: 200μA
Alarm: 5mA
LED Rating: Max. 30mA
Temperature Range: 0°C to 49°C
Humidity Range: 10% to 93% non-condensing
IP Rating: IP24
EOL Value: 47K ohms.
WCP-5A-RSG
Maximum Voltage: 30VDC
Switch Rating: 2A
LED Rating: Max. 30mA
Temperature Range: -30°C to 70°C
Humidity Range: 0% to 95% non-condensing
IP Rating: IP67
EOL Value: 47K ohms.
Ordering Information
FG-05-019 FSM500-K “Fire” Intelligent Flashscan Manual Call Point - Red
FG-05-020 WCP-5A-RSG “Fire” Intelligent Weatherproof Manual Call Point - Red
FG-18-019 Spare Glass for all MCP’s
FG-18-020 Spare flap for FSM500-K MCP’s
FG-18-021 Spare flap for all KAC MCP’s
FG-18-022 Re-settable element for all KAC MCP’s
FG-18-023 Spare test key for all MCP’s
© 2009 by Honeywell International Inc. All rights reserved.
Unauthorised use of this document is strictly prohibited.
This document is not intended for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
For more information contact your nearest Notifier Sales Office or Distributor
www.notifier.com.au
Page 2 of 2 DOC-02-088
