A.C.

Hydraulic Power Systems

Monarch−Dyna−Pack M−450 Mini & M−400 Series

Reference: 500−P−000002−E−00
Issue: 05.2010 1/58
2/58 500−P−000002−E−00/05.2010
Contents Page

1 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2 Mission Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.3 Quality Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.4 BucherHydraulicsValueStatement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.5 Prototype Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.6 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 How to Use This Product Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.1 M−400 Series Power System Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 M−400 Series Pump/Motor Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.3 M−400 Series Motor Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.4 Dimensional Information for Standard M−400 Motors With Flexible Couplings . . . . . . . . . . 11
2.5 Reservoirs for M−400 Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.6 Reservoirs for Mini Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.7 Valves for M−400 Series Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.8 M−400 Series Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.9 Monarch Hand Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.10 Standard Hand Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.11 High Pressure − Low Displacement Hand Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.12 High Pressure − Heavy Duty Hand Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.13 Heavy Duty Remote Hand Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.14 Model H−100 Series Hand Pumps With Reservoirs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3 Monarch A.C. Hydraulic Power Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.1 Model M−4226 Mini System (Formerly M−455) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3.2 Model M−4326 (Formerly M−426) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.3 Model M−4204 Mini System (Formerly M−454) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3.4 Model M−4304 (Formerly M−404) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.5 Model M−4313 (Formerly M−413) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3.6 Model M−4509 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.7 Model M−4509−C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3.8 Model M−4301 (Formerly M−401) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3.9 Model M−4315 (Formerly M−415) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3.10 Model M−4219 (Formerly M−459) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3.11 Model M−4219 w/PCFC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3.12 Model M−4319 (Formerly M−419) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3.13 Model M−4519−C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3.14 Model M−4303 (Formerly M−403) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3.15 Model M−4310 (Formerly M−410) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

500−P−000002−E−00/05.2010 3/58
 3.16 Model M−4551−C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.17 Model M−4252 (Formerly M−452) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3.18 Model M−4253 (Formerly M−453) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3.19 Model M−4506 (Replaces M−406) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3.20 Model M−4505 (Replaces M−405) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3.21 Model M−4328 (Formerly M−428) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
3.22 Model M−4328−P (Formerly M−428−P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.23 Model M−4528 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3.24 Model M−4266 (Formerly M−466) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.25 Model M−4257 (Formerly M−457) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
3.26 Model M−4593−C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

4 MT & T Series Industrial Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

4.1 Standard System Side View w/cutaway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4.2 MT & T Series Pump Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
4.3 Standard D03 and D05 Directional Control Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
4.4 Limited 1 Year Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

4/58 500−P−000002−E−00/05.2010
1 General information
1.1 Introduction
ATTENTION!
This catalogue illustrates the technical specifications for S Always wear eye protection and protective
Bucher Hydraulic’s A.C. range of Hydraulic Power Units. clothing.
Designed for campactness and durability, millions of A.C.
S Remove jewelry and objects that might conduct
Series systems have been sold worldwide for actuating mo-
electricity while working on power units.
bile, material handling, transport, construction, defense, ac-
cess, machine tool, ergonomic, and other labor saving de- S Hydraulic fluid does pose a fire hazard, can
vices. cause burning or skin irritation if not propely
The Bucher Hydraulic name is synonymous with precise handled.
and cost efficient designs, robust construction and rapid S Fluid under pressure can pierce the skin and
backup service. Only eliminate under the direction oft he enter the bloodstream causing death or serious
Jack Family". Reliable service and Quality Machinery injury.
Since 1856" to around the world. S Devices being operated by the hydraulic sys-
tem should be immobilized so they cannot
1.2 Mission Statement moce and cause injury while being inspected or
repaired.
Bucher Hydraulics designs, manufactures and delivers in-
Disconnect from electrical source.
novative fluid power solutions and provides unparalleled
support for its customers. S Prior to performing any maintenance make sure
the equipment is turned off and that any stored
energy, for example pressure, is released. Also,
1.3 Quality Policy extended equipment or cylinders should be
Bucher Hydraulics will provide its customers with products lowered and mechanically locked as required.
and services of continually improving quality to the mutual S Bucher Hydraulics is not responsible for misuse
satisfaction of all parties. or misapplication of porduct. If you have any
questions about application, please contact
1.4 BucherHydraulicsValueStatement local dealer.
S Fluids should be contained and disposed of
S Bucher Hydraulics will be honest, moral and ethical.
properly.
S Bucher Hydraulics will accept responsibility for its actions.
S Bucher Hydraulics will treat people with equality.
S Bucher Hydraulics will make a profit.

1.5 Prototype Policy

We invite you to try our Prototype Program for Solutions to
Your Special Hydraulic Needs.

While Monarch offers a broad line of hydraulic systems and

components, it is impossible to anticipate the needs of every
customer, especially those developing new products. Our
unique prototype program allows us to respond to your spe-
cific needs when an existing "catalogue model" does not fit
your application.

To participate in this program, simply submit a print, sche-

matic, or sketch of the hydraulic power pack that you need
along with a purchase order. We will review the system re-
quirements with you and then manufacture the system that
we believe will satisfy your objectives. The unit will be in-
voiced at an agreed upon price and marked Prototype.

You have 90 days free use of this product for testing and
evaluation from the date of invoice. At the end of this period
you can (1) extend the testing and evaluation period for an
additional 90 days or (2) purchase the unit as invoiced (and
order more if needed) or (3) return the unit via prepaid trans-
portation for full credit.
There is no risk to you. Just the opportunity to solve your hy-
draulic problem with the performance and quality of Mon-
arch Hydraulics.

500−P−000002−E−00/05.2010 5/58
1.6 Features and Benefits
Standard M−4300 series Features: Options
S Flexible coupling extends pump life, eliminates misalign- S Pressure gauges
ment S Sae ports on most models
S All powdered metal gears S Complete selection of nfpa do3 control valves and auxili-
S Hardcoated pump end plates for unmatched durability in ary valves
demanding environments and severe duty applications S Cross port relief
S Externally adjustable relief valve with lock nut S Pressure reducing
S 1 year limited warranty on system S Single and double flow control
S Monarch’s personal customer service S Direct and pilot operated check
S 24 hour shipment on most parts orders S Sequence
S Over two million power units sold S Counter balance
S Worldwide distributor network S Relief
S Pressure switches
S Water/oil heat exchangers
S Float switches
S Reservoirs
S 56 frame air motor
S Explosion proof, 50 hertz, chemical duty, dual frequency,
metric frame, high torque and special duty electric motors
S Gasoline and diesel engines
S Close coupled motors available on many systems

6/58 500−P−000002−E−00/05.2010
2 How to Use This Product Guide
S Select the Circuit that will satisfy your design objectives (refer to page 4.0). Contact the Monarch Factory or your Distributor
if you require assistance.
S Select the Model that will provide the desired performance (Flow/Pressure) and Valve Activation (Solenoid or Manual) listed
in the Power System Selection Guide (refer to page ??).
S Follow the ˆHow To Order Your M−4XXX Power System˜ provided after each Model description. Only the recommended
combinations are listed for the particular system. Custom configurations are available and should be discussed with the
Monarch Factory or your Distributor.
S The operating and design characteristics for all of the basic components are listed on pages ??−?? of this guide.

Select Pump and HP on Page 9, 12, or 13.

Select Motor on Pages 10 or 12.
Select Reservoir on Page 14 −17.
Select Valve(s) on Pages 19−20.
Select Accessories on Page 21.

Example:
Order Your Hydraulic Power System As Follows:
Select Circuit: Pump/Motor/Reservoir. Page 8.
Select Model: M−4304. Page 8.
Performance Required: 1.0 GPM @ 2000 PSI. Reference Page 9
Select Pump: 12172−270 (51) (1.02 GPM @ 1725 RPM). Page 9
Select Motor: 08747 (1−1/2 HP, 1725 RPM). Page 10
Select Reservoir: 06073, Page 14
Accessories: 12172−270
Model Code: M−4304−08747−06073
Horizontal Mounting

S Nominal Dimensions are shown for all basic components. Dimensions may be found for your particular system by deleting
the component shown on the unit drawing and adding the dimension for the same item you have selected. Note: Motor
dimensions may vary according to the manufacturer and should be confirmed by the Monarch Factory or your Distributor.
S When selecting Motor, choose the HP required or the next highest HP available.
S When selecting a Reservoir, consideration should be given to dissipating heat, separating air from the oil, and settling out
contamination in the oil. The traditional ˆrule of thumb˜ is that the reservoir should be 2−3 times larger than the pump output
per minute. There must always be a reserve of oil in the reservoir when all cylinders are fully extended. Contact the Monarch
Factory or your Distributor for proper reservoir sizing for your application.
S All system wiring should be completed by a certified electrician according to local codes.

500−P−000002−E−00/05.2010 7/58
2.1 M−400 Series Power System Selection Guide

Circuit Description Model Page

Pump + Motor M−4226 Mini 26

M−4326 12

Pump + Motor + Reservoir M−4204 13

M−4304 14

Operates Single Acting Cylinder

Pump + Motor + Reservoir + Manual Valve M−4313 15

M−4509 16

M−4509−C 17

M−4301 18

M−4315

Pump + Motor + Reservoir + Solenoid Valve M−4219 19

M−458 Mini 20

M−4319 21

M−4519−C 22

M−4303 23

Operates Double Acting Cylinder

Pump + Motor + Reservoir + Manual Valve M−4310 29

Pump + Motor + Reservoir + Solenoid Valve M−4551−C 34

M−4252 35

M−4253 38

M−4506 24

M−4505 25

Operates 2 Double Acting Cylinder

Pump + Motor + Reservoir + Solenoid Valves M−4328 41

M−4328−P 42

M−4528 42

Independent Operation of 2 Single Acting Cylinders or Master/Slave

Pump + Motor + Reservoir + Solenoid Valves M−4266 39

M−4257 40

Operates 1 Double Acting and 1 Single Acting Cylinder

Pump + Motor + Reservoir + Solenoid Valves M−4593−C 39

8/58 500−P−000002−E−00/05.2010
2.2 M−400 Series Pump/Motor Performance Data

Pump Code Displacement RPM GPM Input HP Required at Pressure (PSI)

In3/Rev (Cm3/Rev) 500 1000 1500 2000 2500 3000

12637−150(72)* 0.032 1725 0.24 0.20 0.30 0.35 0.50 0.55 0.75
(0.524) 3450 0.48 0.40 0.60 0.70 1.00 1.10 1.50

12637−270(62)* 0.057 1725 0.42 0.20 0.35 0.45 0.60 0.70 0.90
(0.934) 3450 0.85 0.40 0.70 0.90 1.20 1.40 1.80

12172−150(42) 0.077 1725 0.58 0.25 0.45 0.60 0.80 1.00 1.15
(1.26) 3450 1.15 0.50 0.90 1.20 1.60 2.00 2.30

12172−200(43) 0.099 1725 0.74 0.35 0.55 0.80 1.05 1.30 1.50
(1.66) 3450 1.48 0.70 1.10 1.60 2.10 2.60 3.00

12172−250(03) 0.125 1725 0.93 0.45 0.75 1.10 1.40 1.70 2.15
(2.13) 3450 1.87 0.90 1.50 2.20 2.80 3.40** 3.95**

12172−270(51) 0.137 1725 1.02 0.50 0.80 1.15 1.50 2.00 2.25
(2.31) 3450 2.05 1.00 1.60 2.30 3.00 3.60**

12172−330(55) 0.168 1800 1.31 1.04 1.49 1.94 2.39 2.84

(2.76) 3600 1.31 2.09 2.99 3.89 4.79 5.69

12172−380(05) 0.193 1725 1.44 0.60 1.10 1.50 2.00 2.50 3.00
(3.23) 3450 2.88 1.20 2.20 3.00 3.90**

12172−510(07) 0.251 1725 1.85 1.00 1.65 2.50 3.00 3.75**

(4.11) 3450 3.70 2.00 3.30**

** = Intermittent Service Only. Contact the Monarch Factory or your Distributor for operating limits. The above pumps tested
using Mobil DTE 24 at 100°F 165 SUS, 95 Viscosity. Note: kW = HP x 0.746
* = Denotes i−Pump

Recommended Operating Conditions for STANDARD PUMP FEATURES:

M−400 Series Pumps: S Fixed Displacement, External Tooth, Powdered Metal
Oil Temperature Range: 10°F to 170°F (−25°C to 77°C) Gears
Operating Temperature: 50°F to 130°F (10°C to 54°C) S Hardcoat Processed Internal Pump Surfaces Extend
Oil Viscosity: Service Life
− Optimum 100 to 350 SUS (Cst = .22 x SUS − 135/SUS) S Extremely Tolerant of Fluid Contaminants and Resistant
− Minimum 100 SUS at Operating to Galling Caused by Low Viscosity Start−up
− Maximum Start Up 4000 SUS S Wide Temperature and Viscosity Operation
Recommended Filtration: S Cost Effective
− 10 micron nominal or better
S 100% Tested for Volumetric Efficiency and Pressure
Recommended Fluid for indoor use:
S Over Five Million Power Units Sold
− Mobil DTE 24 or equal
Recommended Fluid for outdoor use:
− Mobil DTE 13 or equal
Recommended Fluid for outdoor use:
− ATF Dexron II or equal
Contact factory for use with non−petroleum based fluids and
availability of special seals.

500−P−000002−E−00/05.2010 9/58
2.3 M−400 Series Motor Information

Part Number HP RPM Voltage Phase Frame Enclosure

08740 1/2 1725 115/230/60 1 56C TEFC

08742 1/2 3450 115/230/60 1 56C TEFC

08741 1/2 1725 230/460/60 3 56C TEFC

08743 1 1725 115/230/60 1 56C TEFC

08744 1 1725 230/460/60 3 56C TEFC

08745 1 3450 115/230/60 1 56C TEFC

08746 1 3450 230/460/60 3 56C TEFC

08747 1 1/2 1725 115/230/60 1 56C TEFC

08748 1 1/2 1725 230/460/60 3 56C TEFC

08749 1 1/2 3450 115/230/60 1 56C TEFC

08750 1 1/2 3450 230/460/60 3 56C TEFC

08177−B 2 3450 208/230/60 1 56C TENV

2.8 15 MIN DUTY @ 2.0 HP
5 MIN DUTY @ 2.8 HP

08754 2 1725 115/230/60 1 56C TEFC

08753 2 1725 230/460/60 3 56C TEFC

08751 2 3450 115/230/60 1 56C TEFC

08752 2 3450 230/460/60 3 56C TEFC

08760 3 3450 115/230/60 1 56C TEFC

08761 3 3450 230/460/60 3 56C TEFC

Monarch Supplied 56C Motors have the standard length NEMA shaft shortened by 1−3/16". All other frame size motors and
all special ordered units are supplied with NEMA standard length drive shafts when possible. The above motors may be speci-
fied with standard NEMA 56C length drive shafts.

Special Motors commonly available for use with

M−4300 units include:
S Explosion Proof
S Dual Frequency (50/60 Hz)
S Intermittent Duty − Custom Designed
S Washdown Duty
S 575V AC
S Open Drip Proof
S Totally Enclosed Non−Ventilated
S Custom Designed Motors for Special Applications

10/58 500−P−000002−E−00/05.2010
2.4 Dimensional Information for Standard M−400 Motors With Flexible Couplings
Motor Number 08751 is a 2 HP, 3450 RPM, 115/230 V AC, 60 Hz, 1 Phase, NEMA 56C TEFC and is shown as a general
reference. Dimensions will vary according to motor output and manufacturer. Contact the Monarch Factory for more informa-
tion.
Monarch standard adapter 01605 requires the NEMA motor shaft be shortened by 1−3/16". Adapter 01615 should be specified
when a standard NEMA motor shaft is required.

15/16” (24 mm)

2” (51 mm)

5/8” Ø
(16 mm)
8−11/16”
(221 mm)

1−5/8” 6−13/16”
(41 mm) (173 mm)
10−11/16” (271 mm) 8−1/4”
(210 mm)
SIDE VIEW END VIEW

500−P−000002−E−00/05.2010 11/58
2.4.1 Close Coupled Motors For M−400 Units
The following direct drive (partial) motors are supplied with an adapter for mounting the pump base directly to the motor. The
01605 and/or 01615 extended pump/motor adapter and flexible coupling is not required. The close coupled motors may be
used on Models: M−4301, M−4304, M−4315, M−4319, M−4326, M−4328 and M−4328−P

Part HP Duty RPM Voltage Phase Frame Enclosure

Number

08131 1/2 15 MINUTE 1725 115/230 1 42 TENV

08132 3/4 3 MINUTE 1725 115/230 1 42 TENV

08160 1 15 MINUTE 3450 115/230 1 48 TENV

08157 1 15 MINUTE 3450 230/460 3 48 TENV

08156 1 15 MINUTE 3450 575 3 48 TENV

18502−001 2.5 5 MINUTE 3450 208/230 1 56 TENV

For motors not found in this catalog, please contact factory.

Dimensional Information for Close Coupled Motors

12/58 500−P−000002−E−00/05.2010
2.4.2 Close Coupled Motor for Monarch M−4200 Mini Units
The 08149 110 V AC, PSC 1 Phase, 60 Hz Motor is standard on all Mini Units. The motor includes a thermal overload with
automatic reset. A capacitor is required. The 03862 60 ìF 330V AC Capacitor is available as optional equipment. Note: Other
Voltages, Enclosures, and Capacitors are available.

Pump Code Displacement RPM GPM Input HP Required at Pressure (PSI)

In3/Rev (Cm3/Rev) 500 1000 1500 2000 2500 3000

12637−100(70) 0.021 1800 0.16 7.6 7.7 8.0 8.4 8.9 9.5
(0.34)

12637−120(71) 0.025 1800 0.20 7.6 7.8 8.2 8.8 9.5 9.5
(0.41)

12637−150(72) 0.032 1800 0.25 7.7 7.8 8.6 9.5 9.5 9.5
(0.524)

12637−270(62) 0.057 1800 0.44 7.7 8.7 9.5 9.5

(0.934)

12172−150(42) 0.077 1800 0.60 9.1 9.5

(1.26)

500−P−000002−E−00/05.2010 13/58
2.5 Reservoirs for M−400 Units

Horizontal Length in / (mm)

Part Number Useable Capacity

Cubic inch (in3) Liter (L)

06102 79 1.3 8.00 (203.20)

06103 106 1.75 10.00 (254.00)

06104 134 2.20 12.00 (304.80)

06105 148 2.40 13.00 (330.20)

Vertical Length in / (mm)

Part Number Useable Capacity

Cubic inch (in3) Liter (L)

04616 55 0.90 8.00 (203.20)

04617 90 1.50 10.00 (254.00)

04618 125 2.05 12.00 (304.80)

04619 140 2.30 13.00 (330.20)

14/58 500−P−000002−E−00/05.2010
 Part Number Useable Capacity Length in / (mm)

Horizontal Vertical

Cubic inch (in3) Liter (L) Cubic inch (in3) Liter (L)

06070 190 3.10 168 2.75 9.00 (229)

06072 292 4.80 285 4.70 13.50 (343)

06073 394 6.45 405 6.65 18.00 (458)

Vertical Length in / (mm)

Part Number Useable Capacity

Cubic inch (in3) Liter (L)

06881 693 11.35 10" Sq. x 10"H

06882 1155 18.90 12" Sq. x 10"H

06883 1386 22.70 14" Sq. x 10"H

For reservoirs not found in this catalog, please contact factory..

500−P−000002−E−00/05.2010 15/58
 Horizontal Length in / (mm)

Part Number Useable Capacity

Cubic inch (in3) Liter (L)

14164 157.14 2.58 7.50 (190.50)

14165 203.21 3.33 9.00 (228.60)

14166 264.64 4.34 11.00 (279.40)

14167 326.07 5.34 13.00 (330.20)

14168 387.50 6.35 15.00 (381.00)

14169 541.08 8.87 20.00 (508.00)

14170 725.37 11.89 26.00 (660.40)

Vertical Length in / (mm)

Part Number Useable Capacity

Cubic inch (in3) Liter (L)

14183 85.43 1.40 7.50 (190.50)

14184 149.51 2.45 9.00 (228.60)

14185 234.94 3.85 11.00 (279.40)

14186 320.37 5.25 13.00 (330.20)

14187 404.81 6.63 15.00 (381.00)

14188 619.39 10.15 20.00 (508.00)

14189 875.69 14.35 26.00 (660.40)

For reservoirs not found in this catalog, please contact factory.

16/58 500−P−000002−E−00/05.2010
2.6 Reservoirs for Mini Units

Part Number Horizontal Vertical Length in / (mm)

Useable Capacity

Cubic inch (in3) Liter (L) Cubic inch (in3) Liter (L)

06230 31 0.50 27 0.45 6.46 (164.08)

06231 61 1.00 73 1.21 11.08 (281.43)

06233 122 2.00 168 2.72 20.32 (516.13)

For reservoirs not found in this catalog, please contact factory.

500−P−000002−E−00/05.2010 17/58
 Part Number Horizontal Vertical Length in / (mm)

Useable Capacity

Cubic inch (in3) Liter (L) Cubic inch (in3) Liter (L)

06218 31 0.50 39 0.64 4.88 (123.95)

06217 61 1.00 63 1.03 6.76 (171.70)

06197 77 1.26 76 1.24 7.75 (196.85)

06216 92 1.50 87 1.43 8.64 (219.46)

06215 122 2.00 111 1.82 10.52 (267.21)

06214 152 2.50 135 2.21 12.40 (314.96)

06213 183 3.00 159 2.61 14.28 (362.71)

* Reservoir should not be used in a horizontal application without first consulting engineering (Special supports may be re-
quired).

18/58 500−P−000002−E−00/05.2010
2.7 Valves for M−400 Series Units
2.7.1 NPFA DO3 Directional and Auxiliary Control Valves.
Solenoid directional and auxiliary controls are typically added to the M−4505, M−428, and M−429. Please refer to the Bucher
Hydraulics Directional Control Valve brochure for additional information and selection.

Part Number Schematic Description

00970 A B 4−Way/3−Position.
Solenoid Operated.
b P T a Tandem Center. 110VAC

00967 A B 4−Way/3−Position.
Solenoid Operated.
b P T a Open Center. 110VAC

00968 A B 4−Way/3−Position.
Solenoid Operated.
b P T a Closed Center. 110VAC

00969 A B 4−Way/3−Position, P Blocked.

A and B to T.
b P T a "Motor Spool". 110VAC

01041 4−Way/2−Position.
P to A.
b P T Spring Offset. 110VAC

00692 AB 4−Way/2−Position.
P to A.
b P T a Spring Offset. 110VAC

00468 B1 A1 Dual Pilot Operated Check.

A and B Port.

P T B A

00469 Flow Control.

Dual Meter Out.
A and B Port.
P T A B

00443 Cross Port Relief.

A and B Ports.
Adjustable.
P T A B

00474 Dual Relief.

A and B Ports to T.
P T A B Adjustable.

Consult your local Monarch distributor or the factory about special requirements for explosion proof, shockless (soft shift) and
other function and spool configurations not shown here. 12 and 24 VDC, 24 VAC and other voltages are available. Functional
symbols related to solenoid identity "A" or "B" according to NFPA/ANSI standards, i.e., energizing solenoid "A" gives flow P
to A, solenoid "B" gives flow P to B (As Applicable).

500−P−000002−E−00/05.2010 19/58
2.7.2 Cartridge Valves
Solenoid operated cartridge valves are used in the M−403, M−419, and M−452 units.

Part Number Schematic Description

00986 IN 2−Way/2−Position Normally Closed.

Modified Cavity #8. 110VAC
Grounded Coil.
OUT

07144 2−Way/2−Position Normally Closed.

Modified Cavity #8. Manual Operation.
Pull to Open. Spring Closed.

00708 IN 2−Way/2−Position Normally Closed.

Modified. Cavity #8. Manual Overide.
110VAC. Conduit Connector.
OUT

00987 IN 2−Way/2−Position Normally Open.

Modified Cavity #8.
110VAC. Conduit Connector.
OUT

00585 IN 2−Way/2−Position Normally Closed.

Modified Cavity #8.
220VAC. DIN 43650 Connection.
OUT

07145 4−Way/2−Position.
Common Cavity #8. 110VAC.
Conduit Connector.

Consult Factory about many additional valve voltages, coil terminations and other options.

2.7.3 Manual Valves

Manually Operated Directional Control Valves are used on Models M−4301 and M−4310.

Part Number Schematic Description

00948 A B 4−Way/3−Position.
Closed Center.
P T Manually Operated.

00800 CYL 3−Way/3−Position.

Cylinder Port Checked.

00949 A B 4−Way/3−Position.
Open Center.
P T Manually Operated.

00806 A B 4−Way/3−Position.
Tandem Center.
P T
Manually Operated.

00957 A B 4−Way/3−Position.
Tandem Center.
P T NFPA DO3.

20/58 500−P−000002−E−00/05.2010
2.8 M−400 Series Accessories

Part Number Description

01436 Sight Level/Temperature Gauge.

01516 Reservoir Breather, Flush Mount, .375" NPT. Cross Scored.

03171 Reservoir Breather, .375" NPT.

01143 Reservoir Breather, .750" NPT.

01670 Sight Glass. 3/4" NPT.

03219 Pressure Gauge, Liquid Filled. 1/4" NPT. 0−500 PSI.

01434 Pressure Gauge, Liquid Filled. 1/4" NPT. 0−3000 PSI.

01790 Pressure Gauge, Liquid Filled. 1/4" NPT. 0−5000 PSI.

00570 Gauge Shutoff. 1/4" NPT.

00904 Flow Control, Adjustable. 1/4" NPT. − 0−7 GPM

03642 Float Switch, Electrical N.O or N.C.

01875 Filter Only, Return Line. 15 GPM. 10 Micron Nominal, includes filterhead.

04369 Filter, Return Line. 5 GPM. 10 Micron Nominal, includes filterhead.

01425 Filler/Breather, Chrome Plated. Basket Strainer.

Other Available Options and Accessories Include:

S Air Motors
S Heat Exchangers
S Temperature Switches
S Pressure Switches
S Motor Controls
S Multi−Function Valve Controls − Monoblock and Sectional

Consult Factory about many additional valve voltages, coil terminations and other options.

500−P−000002−E−00/05.2010 21/58
2.9 Monarch Hand Pumps
Standard − Standard Displacement (0.50 In3/Stroke) High Pressure − Low Displacement (0.25 In3/Stroke) High Pressure/
Heavy Duty − Standard Displacement (0.50 In3/Stroke)
Note: It is recommended that pins and piston be periodically lubricated to prolong hand pump life.

2.10 Standard Hand Pumps

Description Schematic
S 0.50 In3/Stroke (8.20 Cm3/Stroke)
S Single Acting
S 2000 PSI (138 Bar)
S Outlet Port: 1/4" NPTF
S Ideal For Emergency Back−Up Application in Case of
Primary Pump Failure
S Horizontal or Vertical Mounting
S Designed for Mounting Directly to Monarch Power Units
S Handle May Positioned in any Direction
S Release Valve (Use Handle for Actuating)
S Supplied with Painted Steel "Comfort Grip" Handle
S All Exposed Materials are Aluminum or Plated Steel for
Corrosion Resistance

Popular Options
S Remote Mounting
S Ports. Other Styles Available
S Relief Valve
S Integral Reservoir

22/58 500−P−000002−E−00/05.2010
2.11 High Pressure − Low Displacement Hand Pump

Description Schematic
S 0.25 In3/Stroke (4.10 Cm3/Stroke)
S Single Acting
S 3500 PSI (240 Bar)
S Outlet Port: 1/4" NPTF
S Ideal For Emergency Back−Up Application in Case of
Primary Pump Failure
S Horizontal or Vertical Mounting
S Designed for Mounting Directly to Monarch Power Units
S Handle May Positioned in any Direction
S Release Valve (Use Handle for Actuating)
S Supplied with Painted Steel "Comfort Grip" Handle
S All Exposed Materials are Aluminum or Plated Steel for
Corrosion Resistance

Popular Options
S Remote Mounting
S Ports. Other Styles Available
S Relief Valve

500−P−000002−E−00/05.2010 23/58
2.12 High Pressure − Heavy Duty Hand Pump

Description Schematic
S 0.50 In3/Stroke (8.20 Cm3/Stroke)
S Single Acting
S 4000 PSI (275 Bar)
S Outlet Port: 1/4" NPTF
S Heavy Duty Plated Steel Tension Link and Extruded
Aluminum Top and Bottom Brackets
S Ideal For Emergency Back−Up Application in Case of
Primary Pump Failure
S Horizontal or Vertical Mounting
S Designed for Mounting Directly to Monarch Power Units
S Handle May Positioned in any Direction
S Release Valve (Use Handle for Actuating)
S Supplied with Painted Steel "Comfort Grip" Handle
S All Exposed Materials are Aluminum or Plated Steel for
Corrosion Resistance

Popular Options
S Remote Mounting
S 1/4" NPTF Ports. Other Styles Available
S Relief Valve

24/58 500−P−000002−E−00/05.2010
2.13 Heavy Duty Remote Hand Pump

2.14 Model H−100 Series Hand Pumps With Reservoirs

Hand Pump with Relief Valve and Reservoir

S 12139 Standard Duty Hand Pump with Relief Valve

S 12140 Heavy Duty Hand Pump with Relief Valve

500−P−000002−E−00/05.2010 25/58
3 Monarch A.C. Hydraulic Power Systems
3.1 Model M−4226 Mini System (Formerly M−455)

Description Schematic
S Pump Motor Unit
S Check Valve
S Externally Adjustable Relief Valve
S .375 Inch NPT Suction M

S 7/16−20 SAE Outlet Port

How to Order Your M−4226 Mini System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Voltage Mounting Position Accessories

Ref. Page 9 Ref. Page 10 Ref. Page 9 Ref. Page 21

26/58 500−P−000002−E−00/05.2010
3.2 Model M−4326 (Formerly M−426)

Description Schematic
S Pump Motor Unit OUTLET PORT
3/8 NPTF
S Check Valve
S Externally Adjustable Relief Valve
S .375 Inch NPT Suction
S .375 Inch NPT Outlet
S .125 Inch NPT Relief Valve Return Port

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

"A" dimension for standard 01605 adapter is 2−5/32" (55 mm)
"A" dimension for optional 01615 adapter is 3−11/32" (85 mm)
"B" pump dimensions vary depending on pump used
Dimensions will vary according to motor output and manufacturer

How to Order Your M−4326 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Close−Coupled Mounting Position Accessories

Ref. Page 9 Ref. Page 10 Ref. Page 13 Ref. Page 21

500−P−000002−E−00/05.2010 27/58
3.3 Model M−4204 Mini System (Formerly M−454)

Description Schematic
S Pump/Motor/Reservoir/Unit
S Externally Adjustable Relief Valve
S 7/16−20 SAE O−Ring Outlet Port, 3/8" NPT Return
S Horizontal Mounting Standard M

S Vertical Mounting/Motor Up

How to Order Your M−4204 Mini System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Capacitor Reservoir Mounting Posi- Accessories

tion

Ref. Page 9 Ref. Page 10 Ref. Page 13 Ref. Page17 Ref. Page 21

28/58 500−P−000002−E−00/05.2010
3.4 Model M−4304 (Formerly M−404)

Description Schematic
S Pump/Motor/Reservoir/Unit OUTLET PORT
3/8 NPT
S Check Valve
S Externally Adjustable Relief Valve
S .375 Inch NPT Outlet and Return
S Horizontal Mounting Standard
S Vertical Mounting/Motor Up M

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

"A" dimension for standard 01605 adapter is 2−5/32" (55 mm)
"A" dimension for optional 01615 adapter is 3−11/32" (85 mm)
Dimensions will vary according to motor output and manufacturer

How to Order Your M−4304 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Close−Coupled Reservoir Mounting Po- Accessories

(Length) sition

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 13 Ref. Page 21

500−P−000002−E−00/05.2010 29/58
3.5 Model M−4313 (Formerly M−413)

Description Schematic
S Pump/Motor/Reservoir/Unit OUTLET PORT
3/8 NPTF
S Manually Operated 2−Way/2−Position
Normally Closed Valve
S Externally Adjustable Relief Valve
S .375 Inch NPT Outlet and Return
S Horizontal Mounting Standard
S Vertical Mounting/Motor Up
M

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

"A" dimension for standard 01605 adapter is 2−5/32" (55 mm)
"A" dimension for optional 01615 adapter is 3−11/32" (85 mm)
Dimensions will vary according to motor output and manufacturer

How to Order Your M−4313 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Reservoir Mounting Posi- Accessories

(Length) tion

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 21

30/58 500−P−000002−E−00/05.2010
3.6 Model M−4509

Description Schematic
S Pump/Motor/Reservoir/Valve Unit Outlet Port
#6 SAE (9/16−18)
S 3−Way Manually Operated Valve
S Externally Adjustable Relief Valve
S .#6 SAE
S Vertical Mounting Standard (Motor Up)
S Snap Action Push Button Start Switch
in Motor L1

S Kill Switch in Motor (Optional) M

S Cord and Plug from Motor (Optional) L2

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

"A" dimension for standard 01605 adapter is 2−5/32" (55 mm)
"A" dimension for optional 01615 adapter is 3−11/32" (85 mm)
Dimensions will vary according to motor output and manufacturer

How to Order Your M−4509 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Reservoir Mounting Posi- Accessories

(Length) tion

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 21

500−P−000002−E−00/05.2010 31/58
3.7 Model M−4509−C

Description Schematic
S Pump/Motor/Reservoir/Valve Unit Outlet Port
#6 SAE (9/16−18)
S Check Valve
S Externally Adjustable Relief Valve
S Manually Operated Lowering Valve
S Pressure Compensated Flow Control
S #6 SAE Outlet
L1
S Vertical Mounting Standard, Motor Up
M

Popular Features L2
S Horizontal Mounting

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

Dimensions will vary according to motor output and manufacturer

How to Order Your M−4509−C Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Reservoir Mounting Posi- Accessories

(Length) tion

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 21

32/58 500−P−000002−E−00/05.2010
3.8 Model M−4301 (Formerly M−401)

Description Schematic
S Pump/Motor/Reservoir/Unit OUTLET PORT

S 3−Way Manually Operated Valve ”A” ”B”

S Externally Adjustable Relief Valve
S .250 Inch NPT Outlet
S Horizontal Mounting Standard
S Vertical Mounting (Motor Up) Optional ”P” ”T”

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

"A" dimension for standard 01605 adapter is 2−5/32" (55 mm)
"A" dimension for optional 01615 adapter is 3−11/32" (85 mm)
Dimensions will vary according to motor output and manufacturer

How to Order Your M−4301 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Close−Coupled Reservoir Mounting Po- Accessories

(Length) sition

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 13 Ref. Page 21

500−P−000002−E−00/05.2010 33/58
3.9 Model M−4315 (Formerly M−415)

Description Schematic
S Pump/Motor/Reservoir/Unit 1/4 NPTF

S Integral Shuttle Valve

S Externally Adjustable Relief Valve
S .250 Inch NPT Outlet
S Horizontal Mounting Standard
S Vertical Mounting (Motor Up) Optional
M

How to Order Your M−4315 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Close−Coupled Reservoir Mounting Po- Accessories

(Length) sition

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 13 Ref. Page 21

34/58 500−P−000002−E−00/05.2010
3.10 Model M−4219 (Formerly M−459)

Description Schematic
S Pump/Motor/Reservoir/Unit
S Check Valve
S Externally Adjustable Relief Valve
S 2−Way/2−Position Normally Closed
Solenoid Operated Lowering Valve
S Outlet Port Options: M
Check Valve Port 7/16−20 SAE O−Ring or
Face Port: 7/16−20 SAE O−Ring
S Horizontal Mounting Standard
S Vertical Mounting (Motor Up) Optional

How to Order Your M−4219 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Capacitor Reservoir Mounting Posi- Accessories

tion

Ref. Page 9 Ref. Page 10 Ref. Page 13 Ref. Page17 Ref. Page 21

500−P−000002−E−00/05.2010 35/58
3.11 Model M−4219 w/PCFC

Description Schematic
S Pump/Motor/Reservoir/Unit 7/16 SAE OR NPTF

S Check Valve
S Externally Adjustable Relief Valve
S 2−Way/2−Position Normally Closed
Solenoid Operated Lowering Valve
S Cartridge Style Pressure Compensated
Lowering Valve
S Outlet Port Options:
M
Check Valve Port 7/16−20 SAE O−Ring or
Face Port: 7/16−20 SAE O−Ring
S Horizontal Mounting Standard
S Vertical Mounting (Motor Up) Optional

How to Order Your M−4219 w/PCFC Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Capacitor Reservoir Mounting Posi- Accessories

tion

Ref. Page 9 Ref. Page 10 Ref. Page 13 Ref. Page17 Ref. Page 21

36/58 500−P−000002−E−00/05.2010
3.12 Model M−4319 (Formerly M−419)

Description Schematic
S Pump/Motor/Reservoir/Valve Unit OUTLET PORT
3/8 NPTF
S Solenoid Operated 2−Way/2−Position
Normally Closed Valve
S Externally Adjustable Relief Valve
S .375 Inch NPT Outlet
S Horizontal Mounting Standard
S Vertical Mounting (Motor Up) Optional
M

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

"A" dimension for standard 01605 adapter is 2−5/32" (55 mm)
"A" dimension for optional 01615 adapter is 3−11/32" (85 mm)
Dimensions will vary according to motor output and manufacturer

How to Order Your M−4319 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Close−Coupled Reservoir Mounting Po- Accessories

(Length) sition

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 13 Ref. Page 21

500−P−000002−E−00/05.2010 37/58
3.13 Model M−4519−C

Description Schematic
S Pump/Motor/Reservoir/Valve Unit
S Check Valve
S Externally Adjustable Relief Valve
S 2 Way/2 Position Normally Closed Cartridge Valve
S #6 SAE Outlet
S Horizontal Mounting Standard M

Popular Features
S Vertical Mounting/Motor Up
S Pressure Compensated Cartridge Style On HYDRAULIC SCHEMATIC
Lowering Circuit
S Manual Override

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

Dimensions will vary according to motor output and manufacturer

How to Order Your M−4519−C Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Adapter Motor Reservoir Mounting Posi- Accessories

(Length) tion

Ref. Page 9 Ref. Page 11 Ref. Page 10 Ref. Page 13 Ref. Page 21

38/58 500−P−000002−E−00/05.2010
3.14 Model M−4303 (Formerly M−403)

Description Schematic
S Pump/Motor/Reservoir/Valve Unit OUTLET PORT
3/8 NPT
S Solenoid Operated 2−Way/2−Position Normally Closed
Valve and Solenoid Operated 2−Way/2−Position Normally
Open Valve
S Externally Adjustable Relief Valve
S .375 Inch NPT Outlet
S Horizontal Mounting Standard
S Vertical Mounting (Motor Up) Optional
M

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

"A" dimension for standard 01605 adapter is 2−5/32" (55 mm)
"A" dimension for optional 01615 adapter is 3−11/32" (85 mm)
Dimensions will vary according to motor output and manufacturer

How to Order Your M−4303 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Reservoir Mounting Posi- Accessories

(Length) tion

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 21

500−P−000002−E−00/05.2010 39/58
3.15 Model M−4310 (Formerly M−410)

Description Schematic
S Pump/Motor/Reservoir/Valve Unit OUTLET PORTS
1/4 NPT
S 4−Way Manually Operated Valve ”A” ”B”
S Externally Adjustable Relief Valve
S .250 Inch NPT Outlets
S Horizontal Mounting Standard
S Vertical Mounting (Motor Up) Optional

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

"A" dimension for standard 01605 adapter is 2−5/32" (55 mm)
"A" dimension for optional 01615 adapter is 3−11/32" (85 mm)
Dimensions will vary according to motor output and manufacturer

How to Order Your M−4310 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Close−Cou- Reservoir Mounting Valves Accessories

pled (Length) Position

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 13 Ref. Page19 Ref. Page 21

40/58 500−P−000002−E−00/05.2010
3.16 Model M−4551−C

Description Schematic
S Pump/Motor/Reservoir/Valve Unit C2 C1

S Check Valve
S Externally Adjustable Relief Valve
S (1) 4 Way/2 Position and (1) 2 Way/2 Position Normally
1800 PSI
Closed Solenoid Cartridge Valve Located in the Base
S C1 Port Positively Checked
S Externally Adjustable Relief Valve in C2 Port
S #6 SAE Outlets
S Horizontal Mounting Standard 1200 PS I
M

Popular Features
S Pressure Compensated Cartridge Style Flow Control
S Vertical Mounting, Motor Up

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

Dimensions will vary according to motor output and manufacturer

How to Order Your M−4551−C Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Close−Coupled Reservoir Mounting Po- Accessories

(Length) sition

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 13 Ref. Page 21

500−P−000002−E−00/05.2010 41/58
3.17 Model M−4252 (Formerly M−452)

Description Schematic
S Pump/Motor/Reservoir/Unit C1 C2

S Check Valve
S 4−Way/2−Position Solenoid Cartridge Valve Mounts
Directly to Unit
S 7/16−20 SAE O−Ring Outlet
S Horizontal Mounting Standard
S Vertical Mounting (Motor Up) Optional

How to Order Your M−4252 Mini System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Capacitor Reservoir Mounting Posi- Accessories

tion

Ref. Page 9 Ref. Page 10 Ref. Page 13 Ref. Page17 Ref. Page 21

42/58 500−P−000002−E−00/05.2010
3.18 Model M−4253 (Formerly M−453)

Description Schematic
S Pump/Motor/Reservoir/Unit OUTLET PORTS
1/4 NPT
S 4−Way/3−Position DO3 Solenoid Valve
S 7/16−20 SAE O−Ring Outlet
S Horizontal Mounting Standard
S Vertical Mounting (Motor Up) Optional

How to Order Your M−4253 Mini System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Capacitor Reservoir Mounting Posi- Accessories

tion

Ref. Page 9 Ref. Page 10 Ref. Page 13 Ref. Page17 Ref. Page 21

500−P−000002−E−00/05.2010 43/58
3.19 Model M−4506 (Replaces M−406)

Description Schematic
S Pump/Motor/Reservoir/Unit OUTLET PORTS
1/4 NPT
S NPFA DO3 Valve Mounting Surface
S Externally Adjustable Relief Valve
A B
S .250 Inch NPT Outlets
D03
S Horizontal Mounting Standard
S Vertical Mounting (Motor Up) Optional

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

"A" dimension for standard 01605 adapter is 2−5/32" (55 mm)
"A" dimension for optional 01615 adapter is 3−11/32" (85 mm)
Dimensions will vary according to motor output and manufacturer

How to Order Your M−4506 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Reservoir Mounting Po- Valves Accessories

(Length) sition

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page19 Ref. Page 21

44/58 500−P−000002−E−00/05.2010
3.20 Model M−4505 (Replaces M−405)

Description Schematic
S Pump/Motor/Reservoir/Unit OUTLET PORTS
1/4 NPT
S Externally Adjustable Relief Valve
S 4−Way/3−Position Solenoid Operated DO3 Valve. Stan-
dard Tandem Center Shown. Other Spool Types Avai-
lable.
S .250 Inch NPT Outlets
S Horizontal Mounting Standard
M
S Vertical Mounting (Motor Up) Optional

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

"A" dimension for standard 01605 adapter is 2−5/32" (55 mm)
"A" dimension for optional 01615 adapter is 3−11/32" (85 mm)
Dimensions will vary according to motor output and manufacturer

How to Order Your M−4505 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Reservoir Mounting Po- Valves Accessories

(Length) sition

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page19 Ref. Page 21

500−P−000002−E−00/05.2010 45/58
3.21 Model M−4328 (Formerly M−428)

Description Schematic
S Pump/Motor/Reservoir/Valve Unit
S Externally Adjustable Relief Valve
S Two 4−Way/3−Position Solenoid Operated Tandem
Center DO3 Valves in One Two Station Manifold for
Series Operation
M
S Maximum Relief Valve Setting 1400 PSI
S ..375 Inch NPT Outlets
S Vertical Mounting

Popular Features
S Unit Less D03 Valves

How to Order Your M−4328 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Close−Coupled Reservoir Mounting Po- Valves Accessories

(Length) sition

Ref. Page 9 Ref. Page 10 Ref. Page 13 Ref. Page 13 Ref. Page19 Ref. Page 21

46/58 500−P−000002−E−00/05.2010
3.22 Model M−4328−P (Formerly M−428−P)

Description Schematic
S Pump/Motor/Reservoir/Valve Unit
S Externally Adjustable Relief Valve
S Two 4−Way/3−Position Solenoid Operated Tandem
Center DO3 Valves in One Two Station Manifold for Paral-
lel Operation
M
S ..375 Inch NPT Outlets
S Vertical Mounting

Popular Features
S Unit Built with unloading valve
S Unit Less D03 Valves

How to Order Your M−4328−P Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Close−Coupled Reservoir Mounting Po- Valves Accessories

(Length) sition

Ref. Page 9 Ref. Page 10 Ref. Page 13 Ref. Page 13 Ref. Page19 Ref. Page 21

500−P−000002−E−00/05.2010 47/58
3.23 Model M−4528

Description Schematic
S Pump/Motor/Reservoir/Valve Unit
S Check Valve in "P" Port
S Externally Adjustable Relief Valve
S (2) D03 Double Solenoid Valves
S #6 SAE Outlets
S 250 Inch NPT Outlets M

Popular Features
S Vertical Mounting, Motor Up
S Large Selection of D03/CETOP Valves and Accessories
S Parallel Circuit Available

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

"A" dimension for standard 01605 adapter is 2−5/32" (55 mm)
"A" dimension for optional 01615 adapter is 3−11/32" (85 mm)
Dimensions will vary according to motor output and manufacturer

How to Order Your M−4528 Power System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Close−Coupled Reservoir Mounting Po- Accessories

(Length) sition

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 13 Ref. Page 21

48/58 500−P−000002−E−00/05.2010
3.24 Model M−4266 (Formerly M−466)
Description
Schematic
S Pump/Motor/Reservoir/Valve Unit
S Cartridge Valve Block Manifolded Directly to Power Unit
S Controls 2 Single Acting Cylinders Independently
S .125 Inch NPT Outlets
S Horizontal Mounting Standard
S Vertical Mounting/Motor Up

NOTE: Consult factory regarding return flow limitations.

How to Order Your M−4266 Mini System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Capacitor Reservoir Mounting Posi- Accessories

tion

Ref. Page 9 Ref. Page 10 Ref. Page 13 Ref. Page17 Ref. Page 21

500−P−000002−E−00/05.2010 49/58
3.25 Model M−4257 (Formerly M−457)
Description
Schematic
S Pump/Motor/Reservoir/Valve Unit
S Independent Operation of Two Single Acting Master/
Slave Cylinder Circuits
MASTER SLAVE
S Cartridge Valve Block Manifolded Directly to Power Unit
S .125 Inch NPT Outlets
MASTER SLAVE
S Horizontal Mounting Standard
S Vertical Mounting/Motor Up

NOTE: Consult factory regarding return flow limitations.

How to Order Your M−4257 Mini System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Capacitor Reservoir Mounting Posi- Accessories

tion

Ref. Page 9 Ref. Page 10 Ref. Page 13 Ref. Page17 Ref. Page 21

50/58 500−P−000002−E−00/05.2010
3.26 Model M−4593−C
Description
Schematic
S Pump/Motor/Reservoir/Valve Unit
C3 C2 C1
S Externally Adjustable Relief Valve
3000 P SI
S Solenoid Cartridge Valves, Pilot Operated
S Check Valves, and Adustable Cross−Over Relief System 3000 PSI
B
Mounted in a Compact Manifold
S Horizontal Mounting Standard
C A D

Popular Features
S Vertical Mounting, Motor Up

M 2500 PSI

"L" dimension shown for 08751 motor is 10−11/16" (271 mm)

Dimensions will vary according to motor output and manufacturer

How to Order Your M−4593−C Mini System

Comprehensive information may be found on the page referenced below each selection category.

Pump Motor Adapter Reservoir Mounting Posi- Accessories

(Length) tion

Ref. Page 9 Ref. Page 10 Ref. Page 11 Ref. Page 13 Ref. Page 21

500−P−000002−E−00/05.2010 51/58
4 MT & T Series Industrial Power Units

52/58 500−P−000002−E−00/05.2010
4.1 Standard System Side View w/cutaway

Options:
S Water/Oil Heat Exchangers S Custom Systems
S Air/Oil Heat Exchangers S Synthetic Fluids − Consult Factory
S Wide Range of Pressure Gauges S Subplate Mounted D03 and D05 Stack Valves
S Heaters S Cross Port Relief
S Viton Seals S Pressure Reducing
S NPT Ports S Single and Double Flow Control
S Return Filter, 10 Micron Nominal S Directional and Pilot Operated Check
S A Wide Selection of D03 and D05 Directional S Sequence
S Control Valves S Counter Balance Relief
S Pressure Switches
S Float Switches

Recommended Operating Conditions for T Power Units

Oil Temperature Range: 10°F − 170°F
Recommended Operating Temperature: 50°F − 130°F
Oil Viscosity: Optimum: 100 − 350 SUS
Minimum: 100 SUS
Maximum Start Up: 3500 SUS
Recommend Filtration: 25 Micron nominal or less

500−P−000002−E−00/05.2010 53/58
4.2 MT & T Series Pump Performance Data
4.2.1 MT Series

Pump Code IN3/REV RPM GPM 500 HP 1000 HP 1500 HP 2000 HP 2500 HP 3000 HP

12637−150 (72) 0.032 1800 0.25 0.20 0.30 0.35 0.50 0.55 0.75
3600 0.50 0.40 0.60 0.70 1.00 1.10 1.50

12637−270 (62) 0.57 1800 0.45 0.20 0.35 0.56 0.60 0.70 0.90
3600 0.90 0.40 0.70 0.90 1.20 1.40 1.80

12172−150 (42) 0.77 1800 0.60 0.25 0.45 0.60 0.80 1.00 1.15
3600 1.20 0.50 0.90 1.20 1.60 2.00 2.30

12172−200 (43) 0.099 1800 0.80 0.35 0.55 0.80 1.05 1.30 1.50
3600 1.60 0.70 1.10 1.60 2.10 2.60 3.00

12172−250 (03) 0.125 1800 1.00 0.45 0.75 1.10 1.40 1.70 2.15
3600 2.00 0.90 1.50 2.20 2.80

12172−270 (51) 0.137 1800 1.10 0.50 0.80 1.15 1.50 2.00 2.25
3600 2.20 1.00 1.60 2.30 3.00

12172−380 (05) 0.193 1800 1.50 0.60 1.10 1.50 2.00 2.50 3.00
3600 3.00 1.20 2.20 3.00

4.2.2 T Series

Pump Code IN3/REV RPM GPM 500 HP 1000 HP 1500 HP 2000 HP 2500 HP 3000 HP

02913 0.27 1800 2.10 0.85 2.00 2.30 3.00 3.90 4.80

02908 0.37 1800 2.90 1.10 2.10 3.10 4.15 5.15 6.25

02902 0.50 1800 3.90 1.50 2.80 4.00 5.30 6.60 8.10

02909 0.68 1800 5.30 1.90 3.71 5.56 7.42 9.28 11.13

02904 0.84 1800 6.55 2.40 4.60 6.65 8.65 10.65 12.85

02910 0.97 1800 7.60 2.70 5.32 7.90 10.50 13.20 16.00

02911 1.15 1800 9.00 3.15 6.30 9.45 12.62 15.80 18.90

02912 1.37 1800 10.7 3.80 7.50 11.20 14.90 18.70

02907 1.58 1800 12.3 4.30 8.60 12.90 17.20

2948/2949* 0.960 1800 3.5 to 7.5 GPM. See Below.

* Pump supplied standard with adjustable maximum displacement stop which can be set between 3.0 GPM and 7.5 GPM.
Maximum speed pump 2000 RPM.
* When selecting motor, choose the HP required or the next HP available.
* Contact the factory for operating T Series pumps at speeds above 1800 RPM.

54/58 500−P−000002−E−00/05.2010
4.3 Standard D03 and D05 Directional Control Valves
Manifolds are available from stock in Parallel and Series
Schematic Pump Code configurations. These manifolds may be combined in mul-
tiples of 2 and 3 to form multi−station valve banks.
A B 4−Way/3−Position.
Solenoid Operated.
b a Tandem Center. Example:
P T

A B 4−Way/3−Position.
Solenoid Operated.
b P T a Open Center.

A B 4−Way/3−Position.
Solenoid Operated.
b P T a Closed Center.

A B 4−Way/3−Position, P
Blocked. A and B to T.
b P T a "Motor Spool".
PARALLEL 2 STATION SERIES 3* STATION
4−Way/2−Position.
P to A. * Back pressure in tank line must not exceed 1000 PSI in
b P T Spring Offset Series configuration with D05 valves or 1500 PSI with D03
valves.

DIM. in Reservoir Capacity DIM. in Reservoir Capacity

Inches Total/Usable in Gallons Inches Total/Usable in Gallons

20/12 30/21.8 40/29 8.5/4.4 10.1/5.2 15.2/9.8

H 163/4 221/4 34 H 123/4 141/4 19

H1 16 211/2 331/4 H1 12 131/2 181/4

500−P−000002−E−00/05.2010 55/58
 Series Pump Reservoir Heat Motor Valve Manifold
Exchanger

56/58 500−P−000002−E−00/05.2010
 Relief Valve Directional Control Valves Coil Voltage and Filter Economy Options
Electrical Connec-
tion

500−P−000002−E−00/05.2010 57/58
4.4 Limited 1 Year Warranty

Bucher Hydraulics, Inc. (ˆBucher˜) makes the following warranty to any party who purchases this Bucher Hydraulics, Inc. prod-
uct directly from Bucher Hydraulics, Inc. with the intention of either reselling this Bucher Hydraulics, Inc. product or
incorporating it into or attaching it to some other product (ˆthe purchaser˜).
Bucher Hydraulics, Inc. warrants to the purchaser that this product is free from any substantial defects in materials and work-
manship. If this product proves to be defective in materials or workmanship during the period of this warranty, Bucher Hy-
draulics, Inc. will repair or replace, at it´s option, the defective product free of charge (except for transportation charges as
provided below). The period of this warranty is the (1) year period beginning from the date of shipment of this Bucher Hy-
draulics, Inc. product by Bucher Hydraulics, Inc. to the purchaser.
To obtain warranty service, the purchaser must call Bucher Hydraulics, Inc. to have a return goods authorization number as-
signed to them. The purchaser should then send the product claimed to be defective within the warranty period, transportation
prepaid, to: Bucher Hydraulics, Inc., 1363 Michigan Street N.E., Grand Rapids, MI. 49503, USA. Bucher Hydraulics, Inc. will
then repair or replace, at it´s option, items which it finds to have been defective. Bucher Hydraulics, Inc. will return such repaired
or replacement items to the sender free of charge. Items claimed by the purchaser, but not found by Bucher Hydraulics, Inc.,
to be defective will be returned to the purchaser by a reasonably expeditious means at the purchaser´s expense. This expense
may include labor charges incurred from inspecting the unit.
This warranty does not extend to any failure of this Bucher Hydraulics, Inc. product to perform as warranted hereinabove
which is caused by misuse, abuse or material alteration of this product, or any negligence in connection with the installation,
service, or use of this product by any person other than Bucher Hydraulics, Inc.
Bucher Hydraulics, Inc. hereby expressly disclaims any liability for consequential damages to property other than this Bucher
Hydraulics, Inc. product to perform as warranted hereinabove.

Note: Supersedes all former warranties written or implied.

[email protected] www.bucherhydraulics.com
E 2010 by Bucher Hydraulics Inc. 1363 Michigan Street NE
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
Classification: 450

58/58 500−P−000002−E−00/05.2010