100%(3)100% found this document useful (3 votes) 14K views1 pageUser Manual Digital Time Switch TM-630A & TM-616
SINOTIMER MANUAL PROGRAMMING
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content,
claim it here.
Available Formats
Download as PDF or read online on Scribd
GENERAL INFORMATION
TM-630A
This 24-Hour/7-Day Time Switch series are withhigh load
output current 30A. Thetime switch can be operated in4
separate power supplies ranges from 240Vacto 12Vde,
such as lighting control, HVACR, pumps,motors, fan
controls,access controls, OEM applications,agricultural °
facilities,and general purpose electrical circuits, fi
TM-616
This Digital Timeris accurate to the minute,designed
with17 ON/OFF (event) per day. Rechargeable battery
is for retaining the current time and the program setting |
during Timer's operating power disconnected. i
Also, it provides 15-combination of Daily-Programs which can
leads great convenience to users upon choosing desired L
DAYS of WEEK L
TECHNICAL DATA i
Power supply: AC 220V/240V11 10V,50/60Hz
De t2vizaviaav
Hysteresis: 2 sec/day (250)
ON/OFF operation: 17 ON/OFF
Power consuption: 2VA(MAX)
Output control: 30A 250VAC
Service life: Mechancal 10” Electrical 10”
Minimum interval: 1 minute
Power reserve: 3 years (Lithium battery)
Ambient temperature: -25~+60
Ambient humidity: 35~85%RH
Dimensions: 98755°40mm TM-620A
120°74°52mm TM-616
WIRING DIAGRAM
Digital Tmer
THE3OA, i
L
Load
N
[power [Lose] —_fpowo lLoae]
nfe[nfe
PROGRAMMING THE TIMER
A.Functional description to buttons on panel
1.®:Programs review &setting programs,
2.MANUAL: To select “ON, AUTO or OFF”
3..© :To adjust current DAY and TIME
4,D+ :To adjust day of week
5.H+ :To adjust Hour
6.M+ :To adjust minute
7.RESET : Reset Timer's setting
8.LED: To indicate ON/OFF status
Press RESET button to reset Timer berfore programming
B.Adjusting CLOCK
Press and hold © and then press D+ key, H+ key Mt key
respectively to adjust clock of Timer to accurate DATE,
HOUR, MINUTE. LCD screen shall indicate 0:00~23:59
€.Start to programming the TIMER
1, Press ® key. LCD screen shall show [,7
2. Press D+ key to select any of 15-combination
of Daily-Programs to your application demand.
Continuing to press D+ key, LCD shail alternating
indicate among 1§-combinations.
3.PressH+, M+ respectively to set
desired Hour and Minute for 4
4. After finished setting of 1, Press® key again,
|shall appear on LCD screen
5.Press D+ key to select any of 15-combination
of Dally-Programs to your application demand
Continuing to press D+ key, LCD shall alternating
indicate among 15-combinations.
PERT M Tee Oke
program-period must be consistent
6 Repeat Programming procedure *3" to set desired
Hour & Minute for ty,
7.When finished setting ji & 4,, .Pres ®
2== ===] shall appear on LCD screen.
8 Repeat programming procedure above to complete
rest of ONOFF program-period(event)
J > Ege e00e ef
or just to the desred number of ON/OFF (event)
Setting for cemand of practicable application
=o esses Ge
9.When finished program-setting(event),
press © ,Timer shall start to execute programs.
D.To review progams
Keep to press® display on LCD screen shall
alternating display among each of 7 ON/OFF
CAUTION
Remark:
1. The connection and installation of electrical devices
may only be carried out by a qualified electrician.
2. For voltage and electrical RATING information,
please refer to the markings on the back of timer.
3. See the back of timer for proper wire connections.
4, Timer may need to be connected to power source
In order to set the program.
5.Press RESET key before first use to clear memory.
6.Do not immerse timer in water or any other liquid.
