Nuclias Connect AX3600
Access Point
The Wi-Fi 6-ready DAP-X2850 is on hand to provide unbeatable speeds, greatly
increased capacity and interference-free coverage, paired with easy management by
Nuclias Connect.
DAP-X2850
• Easy to manage with D-Link’s free centralized management software-
based solution, Nuclias Connect
• Wi-Fi 6 delivers greater network efficiency and lower latency, with
nearly four times the capacity of previous Wi-Fi standards
• MU-MIMO slices through congestion, reducing wait time for all users
• Superior throughput with dual-band Wi-Fi offers high transfer speeds
• Coverage is shared more efficiently over more users with Airtime
Fairness
• Band Steering intelligently manages users, pushing them onto the
higher radio frequency when possible
• Two LAN ports (2.5G and 1G) offer expansive backhaul to your wired
network, eliminating bottlenecks at the AP
• Support for Power of Ethernet 802.3at means less wires, for cleaner and
easier deployment
• Stay secure with the latest WPA3™ Personal & Enterprise wireless
encryption
• Supports multiple AP modes to ensure performance optimization based
on your network’s needs
• MAC Address Filtering and WLAN Partitioning ensure ultimate control of
your network’s access
• Captive Portal with industry-standard authentication for enhanced
access management
• Works as a standalone AP or as part of a centralized, scalable multi-
device deployment
Free-to-Download Inexpensive Hardware Searchable Event Log
Management Software Controller and Change Log
Authentication via Customizable
License-Free Access Traffic Reporting &
Captive Portal, 802.1x and RADIUS
Points Analytics
Server, POP3, LDAP, AD
Backwards- Remote Config. & Multilingual
Compatibility Batch Config. Support
Payment Gateway (Paypal)
Intuitive Multi-Tenant & Role-Based
Integration and Front-Desk
Interface Administration
Ticket Management
Technical Specifications / DAP-X2850
General
Device Interfaces 1 x RJ45 console port, 1 x 2.5 Gbps Ethernet
LAN (PoE), 1 x 10/100/1000 Mbps Ethernet
LAN, factory reset, power input
LEDs Power/Status
Antennas 4 x internal
Antenna Gain 3.5 dBi (2.4 GHz), 5.5 dBi (5 GHz)
Maximum Output Power 28 dBm (2.4 GHz), 25.5 dBm (5 GHz)
Data Signal Rate Up to 3600 Mbps
Functionality
Standards IEEE 802.11a/b/g/n/ac/ax, IEEE 802.3u/ab, IEEE 802.3az
Energy-Efficient Ethernet (EEE), IEEE 802.3at PoE
Operating Frequency 2.4 - 2.483 GHz, 5.15 - 5.35 GHz, 5.47 - 5.85 GHz
Security Protocol WPA/WPA2/WPA3™ Personal/Enterprise, WEP
64/128-bit, SSID broadcast disable, MAC
address access control, internal RADIUS server
Power/Status
Software
Network Management Telnet, SSH, Web (HTTP), Secure Socket Layer
(SSL), Traffic control, D-Link Nuclias Connect Reset
Button Console
Physical
Power Supply 12 V / 2.5 A (optional power adapter), IEEE 802.3at PoE
Max. Power Consumption 19.44 W
MTBF > 30,000 hours
Operating Temperature 0 ˚C to 40 ˚C (32 ˚F to 104 ˚F)
Storage Temperature -20˚C to 65 ˚C (-4 ˚F to 149˚F)
Operating Humidity 10% to 90%
LAN LAN Power
Storage Humidity 5% to 95%
(PoE) Connector
Weight 763.8 g (1.7 lb)
Dimensions 212.4 x 212.4 x 46.7 mm (8.36 x 8.36 x 1.8 in)
Certifications CE, FCC
Antenna Pattern / DAP-X2850
Orientation H-Plane E-Plane
2.4 GHz Wall Mounted
X
Wall (E-Plane)
Z
Floor (H-Plane)
5 GHz Wall Mounted
X
Wall (E-Plane)
Z
Floor (H-Plane)
Orientation H-Plane E-Plane
2.4 GHz Ceiling Mounted
X Ceiling (E-Plane)
Z
Floor (H-Plane)
5 GHz Ceiling Mounted
X Ceiling (E-Plane)
Z
Floor (H-Plane)
/ DAP-X2850
Order Information
DAP-X2850 Nuclias Connect AX3600 Access Point
HQ | No. 289, Xinhu 3rd Road, Neihu District, Taipei 11494
Specifications are subject to change without notice. © 2020 D-Link. All Rights Reserved. D-Link and the D-Link logo are trademarks
or registered trademarks of D-Link. All other third-party marks mentioned herein may be trademarks of their respective owners.
