CX34K3

SERVICE MANUAL
S10V9CX34K3//

COLOUR TELEVISION
Chassis No. UA-1

MODEL CX34K3
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.

FEATURE
Ë NTSC (AV thru) Ë Blue Back Noise Mute
Ë Full Auto Channel Preset and Auto Channel Skip Ë Front AV In and Rear AV In/Out Terminals
Ë 100 CH Program Memory Ë Colour-Comb Filter (NTSC AV In)
Ë CATV (Hyper Band) Ready Ë Hotel Mode
〈Use Frequency Synthesizer Tuner〉 Ë Front Headphone Jack
Ë AVL (Sound Keeper) Function Ë Multi Language OSD (English/Chinese/French/
Ë High Contrast Picture (Black Stretch Circuit) Arabic/Malay/Russian)
Ë ON Timer/Sleep Timer/Reminder Timer

CONTENTS
Page Page
» SPECIFICATIONS ............................................. 2 Ë MAIN UNIT ................................................... 26
» IMPORTANT SERVICE NOTES ........................ 2 Ë CRT UNIT ..................................................... 28
» ADJUSTMENT PRECAUTIONS ........................ 3 Ë HEADPHONE UNIT ..................................... 28
» UA1 HOTEL MODE APPLICATION ................. 15 » PRINTED WIRING BOARD ASSEMBLIES ..... 29
» TROUBLE SHOOTING TABLE ........................ 16 » REPLACEMENT PARTS LIST
» SOLID STATE DEVICE BASE DIAGRAM ....... 18 Ë ELECTRICAL PARTS
» CHASSIS LAYOUT .......................................... 19 MAIN UNIT ................................................... 34
» BLOCK DIAGRAM ........................................... 20 CRT UNIT ..................................................... 38
» WAVEFORMS .................................................. 23 HEADPHONE UNIT ..................................... 38
» DESCRIPTION OF SCHEMATIC DIAGRAM .. 24 Ë SUPPLIED ACCESSORIES ........................ 39
» SCHEMATIC DIAGRAM Ë PACKING PARTS ......................................... 39
Ë REMOTE CONTROL UNIT .......................... 24 Ë CABINET PARTS ......................................... 39
Ë TUNER ......................................................... 25

WARNING
The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug and power
receptacle, when servicing this chassis. To prevent electric shock, do not remove cover. No user – serviceable
parts inside. Refer servicing to qualified service personnel.

SHARP CORPORATION
1
 CX34K3
SPECIFICATIONS
Convergence ................................................................................. Self Converging System
Focus .................................................................................... Quadra-Potential Electrostatic
IMPORTANT SERVICE NOTES
Sweep Deflection ................................................................................................... Magnetic Maintenance and repair of this receiver should be done by
Intermediate Frequencies qualified service personnel only.
Picture IF Carrier ............................................................................................... 38.9 MHz
Sound IF Carrier Frequency SERVICING OF HIGH VOLTAGE SYSTEM AND
5.5 MHz .......................................................................................................... 33.4 MHz
Colour Sub-Carrier Frequency ....................................................................... 34.47 MHz
PICTURE TUBE
When servicing the high voltage system, remove static charge from it by
Power Input .................................................................................... AC220 - 240V, 50/60 Hz connecting a 10k ohm Resistor in series with an insulated wire (such as a
Power Consumption ..................................................................................................... 65 W test probe) between picture tube dag and 2nd anode lead. (AC line cord
should be disconnected from AC outlet.)
Audio Power Output Rating ......................................................................... 3.0 W (at Max.) 1. Picture tube in this receiver employs integral implosion protection.
2. Replace with tube of the same type number for continued safety.
Speaker 3. Do not lift picture tube by the neck.
Size ............................................................................................... 5 × 9 cm Elliptic (1 pc) 4. Handle the picture tube only when wearing shatterproof goggles and after
Voice Coil Impedance ......................................................................... 16 ohms at 400 Hz discharging the high voltage completely

Aerial Input Impedance X-RAY

VHF/UHF ....................................................................................... 75 ohm Unbalanced This receiver is designed so that any X-Ray radiation is kept to an absolute
minimum. Since certain malfunctions or servicing may produce potentially
Receiving Channels (PAL-B/G) hazardous radiation with prolonged exposure at close range, the following
2

» VHF ........................................................................................... AU0 thru AU12 ch precautions should be observed:

NZ1 thru NZ11 ch
1. When repairing the circuit, be sure not to increase the high voltage to more
than 23.5 kV (at beam 0 µA) for the set.
» UHF ........................................................................................ AU28 thru AU69 ch 2. To keep the set in a normal operation, be sure to make it function on 22.0 kV
±1.5 kV (at beam 800 µA) in the case of the set. The set has been factory –
Receiving Frequency Adjusted to the above-mentioned high voltage.
» VHF-Channels .................................................................... 44.25 thru 463.25 MHz If there is a possibility that the high voltage fluctuates as a result of the
» VHF-Channels .................................................................. 471.25 thru 863.25 MHz repairs, never forget to check for such high voltage after the work.
3. Do not substitute a picture tube with unauthorized types and/or brands
Dimensions .............................................................................................. Width: 357.0 mm which may cause excess X-ray radiation.
Height: 361.0 mm
Depth: 369.0 mm BEFORE RETURNING THE RECEIVER
Weight (Approx.): 9.2 kg
Before returning the receiver to the user, perform the following safety checks.
Cabinet Material ................................................................................................. All Plastics
1. Inspect all lead dress to make certain that leads are not pinched or that
hardware is not lodged between the chassis and other metal parts in the
receiver.
2. Inspect all protective devices such as non-metallic control knobs, insulating
Specifications are subject to change without prior notice. fishpapers, cabinet backs, adjustment and compartment covers or shields,
isolation resistor-capacity networks, mechanical insulators and etc.

2-1 2-2
 ADJUSTMENT PRECAUTIONS Ë SERVICE MODE

This model’s setting are adjusted in two different ways: though the I2C bus control and in the (1) In the Service Mode, Key is used to select the mode in the following order.
conventional analog manner. The adjustments via the I2C bus control include preset-only
items and variable data. AGC & WHITE POINT SUB
GEOMETRIC ADJ. ADJ.
MODE MODE MODE

1. Setting the service mode by the microprocessor.

1 Make a short-circuit JA122 and JA124 for a second and release to switch to the service Y-DELAY
ADJ.
mode position and the microprocessor is in input mode. (Adjustment through the I2C bus MODE
control). (Use JWS Key to set as well).
2 Press the CH DOWN / UP key on the remote controller to get ready to select the mode
one by one. MISC. IC OFFSET
3 Press the CH DOWN / UP key on the remote controller to select the modes reversibly OPTION OPTION ADJ.
one by one. MODE MODE MODE
4 Using the VOLUME UP/ DOWN key on the remote controller, the data can be modified.
5 Make a short-circuit JA122 and JA124 for a second and release to switch to the normal FORWARD : CH DOWN KEY
mode (OFF) position and the microprocessor is in out of the service mode. REVERSE : CH UP KEY

2. Factory Presetting. AGC & WHITE POINT SUB

GEOMETRIC ADJ. ADJ.
1 Make a short-circuit JA122 and JA124 for a second and release to switch to the service MODE MODE MODE
mode position and turn on the main power switch. Initial values are automatically preset, ↓ ↓ ↓
only when a new EEPROM is used (Judge with the first 4 bytes). AGC TAKE OVER POINT (AGC) W.P. RED STD. W.T. (DRI-RS) MAX VOLUME (SUB-VOL)
↓ ↓ ↓
2 The initial data are preset as listed in pages 4-6. VERTICAL SLOPE (V-LIN) W.P. GREEN STD. W.T.(DRI-GS) SUB CONTRAST (SUB-CON)
3

3 Make sure the data need modify or not (Initial data). ↓ ↓ ↓

VERTICAL AMP (V-AMP) W.P.BLUE STD. W.P. (DRI-BS) SUB COLOUR (SUB-COL)
↓ ↓ ↓
Note: Once the chassis has been assembly together and ready to be POWER ON for the VERTICAL SHIFT (V-CENT) W.P. RED WARM W.P.(DRI-RW) SUB BRIGHTNESS (SUB-BRI)
FIRST TIME, make sure to make a short-circuit JA122 and JA124 switch to the ↓ ↓ ↓
HORIZONTAL SHIFT (H-CENT) W.P. GREEN WARM W.P.(DRI-GW) SUB TINT (SUB-TINT)
service mode position first and then turn on the main power switch. (See 2-1 above). ↓ ↓ ↓
S-CORRECTION (S-COR) W.P. BLUE WARM W.P.(DRI-BW) SUB SHARPNESS (SUB-SHP)
↓ ↓
Precaution: If haven’t done this initiation, it may possibly generate excessive Beam W.P. RED COOL W.P.(DRI-RC) MAX HOTEL VOLUME (HTL-VOL)
current. ↓ ↓
W.P. GREEN COOL W.P.(DRI-GC) HOTEL PROGRAM NO(HTL-PRG)
↓ ↓
3. For reference please check with memory map W.P. BLUE COOL W.P. (DRI-BC) OSD GRB REFERENCE (RGB)
↓
(UA1 Series type RH-IX3368CE Attachment) BLACK LEVEL OFFSET R(CUT-R)
↓
BLACK LEVEL OFFSET B(CUT-B)
↓
CATHODE DRIVE LEVEL(CDL)

FORWARD : CH DOWN KEY

REVERSE : CH UP KEY
*( ) means OSD display.

CX34K3
3-1 3-2
 CX34K3
Y-DELAY
ADJ.
OFFSET
ADJ.
IC
OPTION
USER DATA IN SERVICE MODE
MODE MODE MODE

↓ ↓ ↓ * While SERVICE mode ON, EEPROM DATA will switch to the service data.
Y-D TIME FOR PAL (TV) (DL-PT) COLOUR OFFSET (PAL) (COL-OP) VERTICAL SCAN DISABLE(VSD) Also, once SERVICE mode OFF, EEPROM will switch back to previous USER DATA.
↓ ↓ ↓ * In the service mode, the user data establish as below,
Y-D TIME FOR SECAM (TV) (DL-ST) COLOUR OFFSET (SECAM) (COL-OS) BLACK STRETCH (BKS)
↓ ↓ ↓
Y-D TIME FOR N358 (TV) (DL-3T) COLOUR OFFSET (NTSC358) (COL-O3) AUTO VOLUME LEVELING(AVL) MODE USER DATA
↓ ↓ ↓
Y-D TIME FOR N443 (TV) (DL-4T) COLOUR OFFSET (NTSC443) (COL-O4) FAST FILTER IF-PLL(FFI) CONTRAST MIN (1/60)
↓ ↓ ↓ COLOUR MIN (1/60)
Y-D TIME FOR B/W (TV) (DL-TV) SHARPNESS OFFSET (PAL) (SHP-OP) ENABLE VERTICAL GUARD (EVG)
↓ ↓ ↓ BRIGHTNESS MIN (1/60)
Y-D TIME FOR PAL (AV) (DL-PA) SHARPNESS OFFSET (SECAM) (SHP-OS) EHT TRACKING MODE (EHT) TINT MIN (1/60)
↓ ↓ ↓
Y-D TIME FOR SECAM (AV) (DL-SA) SHARPNESS OFFSET (NTSC358) (COL-O3) OVERSCAN SWITCH OFF(OSO) SHARPNESS MIN (1/60)
↓ ↓ ↓ WHITE TEMP STANDARD
Y-D TIME FOR N358 (AV) (DL-3A) SHARPNESS OFFSET (NTSC443) (COL-O4) AUTO COLOUR LIMIT(ACL)
↓ ↓ S-VOLUME MIN (1/60)
Y-D TIME FOR N443(AV) (DL-4A) FORCED COLOUR LIMIT(FCO)
↓ BLUE BACK OFF *1 : For each CH, before
Y-D TIME FOR B/W (AV) (DL-AV) C SYSTEM AUTO changing service mode
*(Y-D : Y-DELAY)
S SYSTEM *1 setting.

MISC.
OPTION The flow of Mode lists as following,
MODE A B
↓ ↓ ↓ * Direct Key-in Step1 Mode
SOUND SYSTEM M (S-M) NUMBER OF EXT AV SOURCE (AV) BILINGUAL(BIL)
↓ ↓ ↓ RC COMMAND SERVICE-ITEM
SOUND SYSTEM DK (S-DK) FM WINDOW SEVECTION (FMWS) IF AGC SPEED BIT 0 (AGC0)
↓ FUNCTION AGC
↓ ↓
4

SOUND SYSTEM I (S-I) SOUND MUTE BIT 0 (SM0) IF AGC SPEED BIT 1 (AGC1) CONTRAST DOWN V-LIN
↓ ↓ ↓
SOUND SYSTEM BG (S-BG) SOUND MUTE BIT 1 (SM1) FOA Time Constant-RF (FOA-FE) COLOUR DOWN V-AMP
↓ ↓ ↓ BRIGHTNESS DOWN V-CENT
PLAYBACK SECAM (P-SECAM) THAI LANGUAGE (THA) FOB Time Constant-RF (FOB-FE)
↓ ↓ ↓ TINT DOWN H-CENT
FE (RF) NTSC 3.58 (F-N358) ARABIC LANGUAGE (ARA) FOA Time Constant-AV (FOA-AV) SHARPNESS DOWN EW / /
↓ ↓ ↓
FE (RF) NTSC 4.43 (F-N443) MALAY LANGUAGE (MAL) FOB Time Constant-AV (FOB-AV) SYSTEM HB
↓ ↓ BLUEBACK S-COR
FE (RF) SECAM (F-SECAM) CHINESE LANGUAGE (CHI)
↓ ↓ TIMER SUB-VOL
VIDEO MUTE AT IDENT LOSS (VMI) FRENCH LANGUAGE (FRE)
↓ CONTRAST UP SUB-CON
↓
VIDEO MUTE AT PROGRAM RUSSIAN LANGUAGE (RUS) COLOUR UP SUB-COL
/SOURCE CHANGE (VMC) ↓ BRIGHTNESS UP SUB-BRI
↓ FORCED V-SYNC SLICING LEVEL(FSL)
HOTEL MODE (HTL) ↓ TINT UP TINT SUB TINT
↓ SYNC OF OSD (HP2) SHARPNESS UP SUB-SHP
REDUCED FM DEMODULATION ↓
GAIN FOR BTSC SIGNAL (BTSC) RESERVED FOR LATAM :ODER:BRAZIL
↓ /ARGENTINA (OBA)
↓
A
B

4-1 4-2
 After short JA122 & 124, and turn on the main power switch, read data from E2PROM EEPROM ITEMS OSD DATA LENGTH INITIAL DATA FIX/ADJ REMARK
address 00H ~ 03H, and compare to the list below, if different, initialize the E2PROM. SHARPNESS OFFSET (NTSC358) SHP-O3 0~15 12 FIX
Address : Data Address : Data SHARPNESS OFFSET (NTSC443) SHP-O4 0~15 8 FIX
00H : 55H 02H : 43H VERTICAL SCAN DISABLE VSD 0(DISABLE)/1(ENABLE) 0 FIX
01H : 4FH 03H : A1H BLACK STRETCH BKS 0(DISABLE)/1(ENABLE) 1 FIX
AUTOMATIC VOLUME LEVELING AVL 0(DISABLE)/1(ENABLE) 1 FIX
EEPROM ITEMS OSD DATA LENGTH INITIAL DATA FIX/ADJ REMARK
FAST FILTER IF-PLL FFI 0(DISABLE)/1(ENABLE) 0 FIX
AGC TAKE OVER POINT AGC 0~63 14 ADJ ENABLE VERTICAL GUARD (RGB BLANKING) EVG 0(DISABLE)/1(ENABLE) 1 FIX ONLY BLK
VERTICAL SLOPE V-LIN 0~63 32 ADJ EHT TRACKING MODE (HCO) EHT 0(DISABLE)/1(ENABLE) 1 FIX
VERTICAL AMPLITUDE V-AMP 0~63 32 ADJ OVERSCAN SWITCH OFF OSO 0(DISABLE)/1(ENABLE) 0 FIX
VERTICAL SHIFT V-CENT 0~63 32 ADJ AUTO COLOUR LIMIT ACL 0(DISABLE)/1(ENABLE) 0 FIX
HORIZONTAL SHIFT H-CENT 0~63 32 ADJ FORCED COLOUR LIMIT FCO 0(DISABLE)/1(ENABLE) 0 FIX
S-CORRECTION S-COR 0~63 0 FIX SOUND SYSTEM M S-M 0(DISABLE)/1(ENABLE) 0 FIX
WHITE POINT RED STD WHITE TEMP DRI-RS 0~63 32 FIX SOUND SYSTEM DK S-DK 0(DISABLE)/1(ENABLE) 0 FIX *3
WHITE POINT GREEN STD WHITE TEMP DRI-GS 0~63 32 ADJ SOUND SYSTEM I S-I 0(DISABLE)/1(ENABLE) 0 FIX *3
WHITE POINT BLUE STD WHITE TEMP DRI-BS 0~63 32 ADJ SOUND SYSTEM BG S-BG 0(DISABLE)/1(ENABLE) 1 FIX
WHITE POINT RED WARM WHITE TEMP DRI-RW 0~63 32 FIX PLAYBACK SECAM P-SECAM 0(DISABLE)/1(ENABLE) 1 FIX *3
WHITE POINT GREEN WARM WHITE TEMP DRI-GW 0~63 32 FIX (DRI-GS)-7 DATA FE (RF) NTSC 3.58 F-N358 0(DISABLE)/1(ENABLE) 0 FIX
WHITE POINT BLUE WARM WHITE TEMP DRI-BW 0~63 32 FIX (DRI-BS)-7 DATA FE (RF) NTSC 4.43 F-N443 0(DISABLE)/1(ENABLE) 1 FIX
WHITE POINT RED COOL WHITE TEMP DRI-RC 0~63 25 FIX (DRI-BS)-7 DATA FE (RF) SECAM F-SECAM 0(DISABLE)/1(ENABLE) 1 FIX *3
WHITE POINT GREEN COOL WHITE TEMP DRI-GC 0~63 32 FIX (DRI-GS)-7 DATA VIDEO MUTE AT IDENT LOSS VMI 0(DISABLE)/1(ENABLE) 1 FIX
WHITE POINT BLUE COOL WHITE TEMP DRI-BC 0~63 63 FIX (DRI-BS)SAMEDATA VIDEO MUTE AT PROGRAM/SOURCE CHANGE VMC 0(DISABLE)/1(ENABLE) 1 FIX
MAX VOLUME SUB-VOL 0~63 63 FIX HOTEL MODE HTL 0(DISABLE)/1(ENABLE) 0 FIX
SUB CONTRAST SUB-CON 0~63 63 FIX REDUCED FM DEMODULATOR GAIN FORBTSC SIGNAL BTSC 0(DISABLE)/1(ENABLE) 0 FIX
SUB COLOUR SUB-COL 0~63 32 ADJ NUMBER OF EXTERNAL AV SOURCE AV 0 FOR1 AV/1 FOR 2AV 1 FIX
SUB BRIGHTNESS SUB-BRI 0~63 32 ADJ FM WINDOW SELECTION FMWS 0(DISABLE)/1(ENABLE) 0 FIX
5

SUB TINT SUB-TINT 0~63 32 ADJ SOUND MUTE BIT 0 SM0 0(DISABLE)/1(ENABLE) 1 FIX
SUB SHARPNESS SUB-SHP 0~63 32 (20) ADJ *1 SOUND MUTE BIT 1 SM1 0(DISABLE)/1(ENABLE) 0 FIX
MAX HOTEL VOLUME HTL-VOL 0~63 32 ADJ THAI LANGUAGE THA 0(DISABLE)/1(ENABLE) 0 FIX
HOTEL PROGRAM NUMBER HTL-PRG 0~99 OR>99FOR NONE 255 FIX ARABIC LANGUAGE ARA 0(DISABLE)/1(ENABLE) 1 FIX
OSD GRB REFERENCE RGB 0~15 15 FIX MALAY LANGUAGE MAL 0(DISABLE)/1(ENABLE) 1 FIX
BLACK LEVEL OFF-SET R CUT-R 0~15 8 FIX CHINESE LANGUAGE CHI 0(DISABLE)/1(ENABLE) 1 FIX
BLACK LEVEL OFF-SET B CUT-B 0~15 8 FIX FRENCH LANGUAGE FRE 0(DISABLE)/1(ENABLE) 1 FIX
CATHODE DRIVE LEVEL CDL 0~15 0 (2) FIX *2 RUSSIAN LANGUAGE RUS 0(DISABLE)/1(ENABLE) 1 FIX
Y-DELAY TIME FOR PAL(TV) [YD] DL-PT 0~15 12 FIX FORCED V-SYNC SLICING LEVEL FSL 0(DISABLE)/1(ENABLE) 0 FIX
Y-DELAY TIME FOR SECAM(TV) [YD] DL-ST 0~15 15 FIX SYNC OF OSD HP2 0(DISABLE)/1(ENABLE) 0 FIX
Y-DELAY TIME FOR N358 (TV) [YD] DL-3T 0~15 12 FIX TUNER CPT CRT 0(DISABLE)/1(ENABLE) 0 FIX
Y-DELAY TIME FOR N443 (TV) [YD] DL-4T 0~15 12 FIX BILINGUAL BIL 0(DISABLE)/1(ENABLE) 0 FIX
Y-DELAY TIME FOR B/W (TV) [YD] DL-TV 0~15 12 FIX IF AGC SPEED BIT 0 AGC0 0(DISABLE)/1(ENABLE) 1 FIX
Y-DELAY TIME FOR PAL (AV) [YD] DL-PA 0~15 12 FIX IF AGC SPEED BIT 1 AGC1 0(DISABLE)/1(ENABLE) 0 FIX
Y-DELAY TIME FOR SECAM (AV) [YD] DL-SA 0~15 15 FIX PHI-1 TIME CONSTANT (RF) FOA-FE 0(DISABLE)/1(ENABLE) 0 FIX
Y-DELAY TIME FOR N358 (AV) [YD] DL-3A 0~15 12 FIX PHI-1 TIME CONSTANT (RF) FOB-FE 0(DISABLE)/1(ENABLE) 0 FIX
Y-DELAY TIME FOR N443 (AV) [YD] DL-4A 0~15 12 FIX PHI-1 TIME CONSTANT (OFF AIR) FOA-AV 0(DISABLE)/1(ENABLE) 1 FIX
Y-DELAY TIME FOR B/W (AV) [YD] DL-AV 0~15 12 FIX PHI-1 TIME CONSTANT (OFF AIR) FOB-AV 0(DISABLE)/1(ENABLE) 1 FIX
COLOUR OFFSET (PAL) COL-OP 0~15 8 FIX
COLOUR OFFSET (SECAM) COL-OS 0~15 8 FIX Note :
COLOUR OFFSET (NTSC358) COL-03 0~15 4 FIX Fixed data, please do not change without specific instruction.
COLOUR OFFSET (NTSC443) COL-O4 0~15 4 FIX *1: Manually change to "20".

CX34K3
SHARPNESS OFFSET (PAL) SHP-OP 0~15 8 FIX *2: Manually change to "2".
SHARPNESS OFFSET (SECAM) SHP-OS 0~15 4 FIX *3: Manually change to "0"

5-1 5-2
 CX34K3
INITIAL SETTING SHIPPING SETTING & CHECKING
(1) In service mode, After execute select POS 1, store the following tuning data in E2PROM. (1) The following default data has been factory-set for the E2PROM.
MCL1 MCL2 ITEMS DATA SETTING
CH-No. Fv (MHz) SOUND SYS CH-No. Fv (MHz) SOUND SYS LAST PROGRAM/CHANNEL 1
0 0 590.25 B/G FLASHBACK PROGARM/CH 1
1 48.25 B/G 1 46.25 B/G DIGIT 1
C-SYSTEM AUTO
2 62.25 B/G 2 64.25 B/G
S-SYSTEM *1
3 77.25 D/K 3 86.25 B/G SKIP OFF
4 175.25 B/G 4 95.25 B/G AFC ON
5 182.25 B/G 5 138.25 B/G VOLUME 1
6 183.25 D/K 6 175.25 B/G CONTRAST 60 (MAX)
COLOUR 0 (CENTER)
7 191.25 D/K 7 182.25 B/G
BRIGHTNESS 0 (CENTER)
8 196.25 B/G 8 189.25 B/G TINT 0 (CENTER)
9 199.25 M 9 196.25 B/G SHARPNESS 0 (CENTER)
10 210.25 B/G 10 209.25 B/G WHITE TEMP STANDARD
11 224.25 B/G 11 216.25 B/G REMINDER TIMER In-active, "--:--"
ON TIMER In-active, "--:--"
12 471.25 B/G 12
OFF TIMER In-active, "--:--"
13 487.25 I 13 LAST POWER POWER-ON
14 503.25 B/G 14 LANGUAGE ENGLISH
15 575.25 B/G 15 BLUE BACK MUTE OFF
16 583.25 B/G 16 HOTEL MODE OFF
0 CHANNEL SKIP ON
17 599.25 B/G 17
18 621.25 M 18 527.25 B/G After pressing "MODEL SETTING", 0 Channel will be skipped.
19 639.25 D/K 19 847.25 B/G
20 703.25 B/G 20 48.25 B/G
6

21 735.25 I 21 175.25 B/G

22 767.25 B/G 22 210.25 B/G
23 815.25 B/G 23 224.25 B/G
24 855.25 I 24 575.25 B/G
25 855.25 B/G 25 599.25 B/G
26 55.25 M 26 767.25 B/G
27 83.25 M 27 183.25 M
28 183.25 M 28 193.25 M
29 193.25 M 29 112.25 B/G
30 217.25 M 30 168.25 B/G
31 471.25 M 31
32 477.25 M 32 294.25 B/G
33 693.25 M 33 463.25 B/G
34 34 174.95 B/G
35 112.25 B/G 35 175.55 B/G
36 168.25 B/G 36
37 37 599.25 B/G
38 294.25 B/G 38
39 463.25 B/G 39
40 40
41 647.25 B/G 41
42 663.25 B/G 42
43 679.25 B/G 43
44 174.95 B/G
45 175.55 B/G

6-1 6-2
 PIF ADJUSTMENT PURITY ADJUSTMENT
NO. Adjustment part Adjusting procedure and conditions Waveform and others NO. Adjustment part Adjusting procedure and conditions Waveform and others
1 Tuner IFT 1. Get the tuner ready to receive the E-9 CH 1 PURITY ADJ. 1. Receive the GREEN-ONLY signal. Adjust the
(PRESET) signal, but with no signal input. beam current to about 500 µA.
Adjust the PLL data. 2. Degauss the CRT enough with the degausing
2. Connect the sweep generator's output cable 10k 1n60 1000p
coil. a b
to the tuner antenna. (RF SWEEP) Oscilloscope IF OUT Note: Follow the Job Instruction Sheet to ad-
3. Adjust the sweep generator's to 80dBuV. 100k 75ohm just the magnetic field.
4. Connect the response lead (use LOW IMPED- Vertical Bv : +0.030 mT
ANCE probe with wave detector; see Fig.1) to (0.30 gauss)
the tuner's IF output terminal. (This terminal Fig. 1 Horizontal Bh : +0.020 mT
must have the probe alone connected). (0.20 gauss) Fig. 4-1
E-9 CH
5. Set the RF AGC to 0 - 6 V with no saturation 3. Maintain the purity magnet at the zero
with the waveform. magnetic field and keep the static convergence
P C roughly adjusted.
6. Adjust the tuner IF coil to obtain the waveform
as shown in Fig. 2. -1.5+/-0.8dB 4. Observe the points a, b as shown in Fig. 4-1 A
through the microscope. Adjust the landing to
Note: Be sure to keep the tuner cover in Fig. 2 the rank A requirements.
position during this adjustment. 5. Orient the raster rotation to 0 eastward. B
6. Tighten up the deflection coil screws.
» Tightening torque: 108 ± 20 N (11 ±2 kgf)
A=B
7. Make sure the CRT corners landing meet the
A rank requirements. If not, stick the magnet
sheet to correct it.
Fig. 4-2
Note: This adjustment must be done after Rank "A"
2 RF-AGC 1. Receive "PAL COLOUR BAR" signal. Note: warming up the unit for 30 minutes (on the right of the CRT)
TAKE OVER » Signal Strength: 54 ±1 dBµV (75 ohm open) For the 50 ohm signal strength or longer with a beam current over
POINT gauge, when not using 50/75 500 µA.
ADJUSTMENT 2. Connect the oscilloscope to TP210 (Tuner’s impedance adapter, signal Note: Set the service mode by JA122 &
(I2C BUS AGC Terminal) as shown in Fig. 3. strength is 52 ±1 dBµV(75 ohm JA124 (short) then press factory proc-
7

CONTROL) open), instead of 54 ±1 dBµV ess R/C RGB key to change to RGB A
Oscilloscope (75 ohm open). mono colour mode.
+ TP210 Precaution:
0.1V
– The loss of using impedance * For the following colours press R/C RGB key B
adapter to change.
Bias box TV Set A=B
+
Green-only Blue-only Red-only
– Fig. 4-3
» Bias box: About 4.5 V
Rank "A"
Fig. 3 Signal-colour (on the left of the CRT)
screen cleared
3. Call "AG" mode in service mode. Adjust the
"AG" bus data to obtain the Tuner output pin * Press R/C RGB key for 1 second
drop 0.1 V below maximum voltage. in NORMAL MODE, the colour
4. Change the antenna input signal to will change to RGB mono colour
63~67dBµV, and make sure there is no noise. mode.
5. Turn up the input signal to 90~95 dBµV to be
sure that there is no cross modulation beat. The TEXT Key "R. G. Cy" Key can
be directly use to change to other
colours screen.

CX34K3
7-1 7-2
 CX34K3
CONVERGENCE ADJUSTMENT CRT CUT-OFF, BACKGROUND AND SUB-CONTRAST ADJUSTMENT
NO. Adjustment part Adjusting procedure and conditions Waveform and others NO. Adjustment part Adjusting procedure and conditions Waveform and others
1 CONVERGENCE 1. Receive the "Crosshatch Pattern" signal. BGR 1 CRT CUTOFF 1. Switch TV to VIDEO mode, BLUE BACK OFF
ADJ. 2. Using the remote controller, call NORMAL ADJUSTMENT with NO VIDEO signal. 3.0Vdc
(To be done mode. B (I2C BUS 2. Press R/C to set Picture Normal condition.
after the purity G CONTROL) 3. Connect the oscilloscope to Red OUT from
adjustment.) Static convergence R IC801.(TP851)
1. Turn the 4-pole magnet to a proper opening
angle in order to superpose the blue and red Fig. 5-1 Range : 1 V/Div (DC)
colours. Sweep : 5 msec/Div 1V
2. Turn the 6-pole magnet to a proper opening RGB
angle in order to superpose the green colour 4. Adjust SCREEN VR, so that the tip of signal 0
over the blue and red colours. R reach 3.0 +0.1 Vdc. Fig. 6
G
Dynamic convergence B 2 SUB- 1. Call "SUB-BRI" in service mode. (Receive
1. Adjust the convergence on the fringes of the BRIGHTNESS Crosshatch pattern with 5 black level windows)
screen in the following steps. Fig. 5-2 ADJUSMENT 2. Adjust the "SUB BRIGHT" bus data in order
a) Fig. 5-1: Drive the wedge at point "a" and (I2C BUS that the line 1, 2 and 3 have the same darkness
RGB 1 2 3 4 5
swing the deflection coil upward. B CONTROL) wherelse line 4 is slightly brighter than line 1,
b) Fig. 5-2: Drive the wedge at points "b" G 2 and 3 and finally line 5 will be the brighter
R than line 4. 1, 2 and 3 are in same black level.
and "c" and swing the deflection coil
downward. Fig. 7
c) Fig. 5-3: Drive the "c" wedge deeper and 3 WHITE 1. Receive the "WHITE" Pattern with BURST
swing the deflection coil rightward. Fig. 5-3 BALANCE signal.
d) Fig. 5-4: Drive the "b" wedge deeper and SERVICE 2. Press R/C to set Picture NORMAL condition.
BGR
swing the deflection coil leftward. R MODE ADJ. 3. Connect the DC miliammeter between the * 12,300°K X : 0.272
2. Fix all the wedges on the CRT and apply glass G
B (I2C BUS TP602 (-) and TP603 (+). Y : 0.275
tape over them. CONTROL) 4. Check Beam current should be around 1,100 µA.
3. Apply lacquer to the deflection yoke lock screw, 5. Set it to service mode and adjust the " WPG" (MINOLTA COLOUR ANALYZER
magnet unit (purity, 4-pole, 6-pole magnets) (White Point-G), "WPB" (White Point-B) data CA-100)
8

and magnet unit lock screw. to have a colour temperature of 12,300°K *Note: Above Data can be UP/
Fig. 5-4
(white). * Note . DOWN by Volume key.
Finally received the Red-only and Blue-only 6. Receive "White" pattern, with BURST Signal, and
signals to make sure there is no other colours Wedge "a"
set Brightness Y by generator, to ** 10 cd/m2
on the screen. (Minolta CA-100) by reducing Luminate Y signal.
About About
100° 100° 7. Adjust "CUT-R" & "CUT-G" to get 12,300°K. Then
go back normal mode (High Bright)** to check
Lacquer colour temperature. If out of range, back to (1).

Note: This adjustment must be done after

Wedge Wedge warming up the unit for 30 minutes
"b" "c" or longer with a beam current over
Fig. 5-5 700µA.

4-pole magnet * Adjust DRI-GC/GW, DR-BC/BW as following

6-pole magnet data, after finishing DRI-GS and DRI-BS:
CRT neck DRI-GC=DRI-GW="DRI-GS"-7: DRI-BW="DRI-BS"-7:
DRI-RC=25: DRI-BC=DRI-BS: DRI-RW=32
** Low=10cd/m2: High=120cd/m2

4 Maximum 1. Receive the "Monoscope Pattern" signal.

beam check 2. Press R/C to set Picture NORMAL condition.
Lacquer 3. Connect the DC miliammeter between TP603
Purity magnet 40mm
(+) and TP602 (–).
Fig. 5-6 (Full Scale: 3 mA Range)
4. Beam current must be within 800 ±100 µA.

8-1 8-2
 HORIZONTAL AND VERTICAL DEFLECTION LOOP ADJUSTMENT NTSC CHROMA ADJUSTMENT
NO. Adjustment part Adjusting procedure and conditions Waveform and others NO. Adjustment part Adjusting procedure and conditions Waveform and others
1 V-LINEARITY 1. Receive Monoscope Pattern Signal. 1 SUB-TINT 1. Receive the "NTSC3.58 Colour Bar" signal
(I2C BUS 2. Call the "V-LIN" mode. (I2C BUS through AV in.
SAME LEVEL
CONTROL) 3. Increase or decrease "V-LIN" by Volume key till CONTROL) 2. Connect the oscilloscope to TP853 (Pin (5) of
the horizontal line in the center of monoscope is P882) BLUE-OUT.
just at the position where the blanking starts. » Range : 100mV/div. (AC)(Use Probe 10:1)
» Sweep time : 10 µsec/div.
2 V-CENTER 1. Call the "V-CENT" mode.
(I2C BUS 2. Increase or decrease "V-CENT" by Volume key 3. Call the "SUB-TINT" mode in service mode.
CONTROL) till the picture is centered. Adjust the "SUB-TINT" bus data to obtain the W Y Cy G Mg R B
same level of waveform shown as Fig. 9.
3 V - AMP 1. Call the "V-AMP" mode. 4. Clear the SERVICE mode. Fig. 9
(I2C BUS 2. Increase or decrease "V- AMP" by Volume key
CONTROL) to set overscan of 9.5% typical.
Adjustment Spec 9.5% range +1% -0%.

4 S-CORREC- FIXED DATA, NO NEED TO ADJUST. PROTECTOR OPERATION CHECKING

TION (I2C NO. Adjustment part Adjusting procedure and conditions Waveform and others
BUS CON-
TROL) 1 BEAM 1. Receive "Monoscope Pattern" signal. * Select one of Q883/5/7 to do
PROTECTOR 2. Set CONTRAST MAX. each short test.
5 H - CENTER 1. Call the "H-CENT" mode. 3. Set BRIGHT MAX.
2. Increase or decrease "H-CENT" by Volume key 4. During the Collector & Emitter of Q883/5/7
to center the picture horizontal. short, make sure the protector ON and switch
to standby mode.
6 SUB- 1. Call the "SUB-SHP" mode.
SHARPNESS 2. Set "SUB-SHP" to 20 by pressing Volume down 2 H, V 1. Receive "Monoscope Pattern" signal.
key. PROTECTOR 2. Connect output of Bias Box to D607 cathode
(R606 side).
9

7 Focus 1. Receive the "Monoscope Pattern" signal. 3. Set voltage of Bias Box to 18V and make sure
adjustment 2. Press R/C to set Picture NORMAL condition. the protector is not work.
3. Adjust the focus control to get the best focus. 4. Set voltage of Bias Box to 27V, and make sure
the protector is work.

3 Other 1. Once finish rectified Electrolytic Capacitor short

protectors testing in +B line, check all possible damaged
components on +B line.
PAL CHROMA ADJUSTMENT (Use random selected set for inspection)
NO. Adjustment part Adjusting procedure and conditions Waveform and others
1 SUB COLOUR 1. Receive the "PAL Colour Bar" signal.
(I2C BUS 2. Press R/C to set Picture Normal condition. A/V INPUT AND OUTPUT CHECKING
CONTROL) 3. Connect the oscilloscope to Red cathode
Cy G B NO. Adjustment part Adjusting procedure and conditions Waveform and others
(TP854).
» Range : 20 V/div. (AC) (Use 10:1 probe) 1 VIDEO AND 1. Receive the "PAL Colour Bar" signal (100%
» Sweep time : 10 µsec/div. AUDIO OUT- White Color Bar, Sound 400 Hz 100% Mod.)
PUT CHECK 2. Terminate the Video output with a 75 ohm im-
4. Using the R/C call "SUB COL" in SERVICE pedance. Make sure the output is as specified
mode. Adjust SUB COLOUR bus data, so that (1.0 Vp-p ±3 dB).
the 75% White & Red portions of PAL Colour W Y 100%W Mg R 3. Terminate the Audio output with a 10k ohm im-
Bar be at the same level shown as Fig. 8. 75% pedance. Make sure the output is as specified
5. Clear the SERVICE mode. Fig. 8 (1.76 Vp-p ±3 dB).

2 VIDEO AND 1. Using the TV/AV key on the remote controller,

AUDIO INPUT make sure that the modes change in order of
CHECK TV, AV1, AV2 & TV again and the video & audio
output are according to the input terminal for

CX34K3
each mode.

9-1 9-2
 CX34K3
FUNCTION OPERATION CHECKING (VIDEO AND AUDIO) FUNCTION OPERATION CHECKING (VIDEO AND AUDIO)
NO. Adjustment part Adjusting procedure and conditions Waveform and others (Continued)
1 CONTRAST 1. Receive "Monoscope Pattern" signal. NO. Adjustment part Adjusting procedure and conditions Waveform and others
key 2. Set P-Mode to select CONTRAST.
3. Press Volume Up/Down key to check whether 9 Colour 1. Receive the "PAL COLOUR BAR" signal, press
the CONTRAST effect is OK or not. system the COLOUR SYSTEM key to select modes
except PAL, check the COLOUR is not working
properly. Then, select the "PAL" mode. Check
2 COLOUR key 1. Receive "Colour Bar" signal. again its colour so that it is working properly.
2. Set P-Mode to select COLOUR. 2. Receive "NTSC 4.43" signal, press COLOUR
3. Press Volume Up/Down key to check whether SYSTEM key to select modes except NTSC
the COLOUR effect is OK or not. 4.43, check the COLOUR is not working
properly. Then, select the "NTSC 4.43" mode.
Check again its colour so that it is working
3 BRIGHTNESS 1. Receive "Monoscope Pattern" signal. properly.
key 2. Set P-Mode to select BRIGHTNESS. 3. Receive "NTSC 4.43/3.58 COLOUR BAR" sig-
3. Press Volume Up/Down key to check whether nal thru AV, press COLOUR SYSTEM key to
the BRIGHTNESS effect is OK or not select modes except N4.43/3.58, check the
COLOUR is not working properly. Then, select
the "NTSC 4.43/3.58" mode. Check again its
4 TINT key 1. Receive the "NTSC Colour Bar" signal thru AV
colour so that it is working properly.
in.
2. Set P-Mode to select TINT.
3. Press Volume Up/Down key to check TINT, UP
for GREEN direction and DOWN for PURPLE
direction whether is OK or not.

5 SHARPNESS 1. Receive "Monoscope Pattern" signal.

Key 2. Set P-mode to select SHARPNESS.
3. Press Volume Up/Down key to check whether
the SHARPNESS effect is OK or not.
10

10 NOISE MUTE 1. Receive "PAL COLOUR BAR" signal.

CHECKING 2. Turn up the volume control to maximum, make
sure the sound is heard from the speakers.
6 CH DISPLAY 1. All Ch (1~99) will have an OSD display of the Then put the unit in no signal state.
COLOUR channel number in green colour under AFT ON 3. Check the sound mute is effective.
condition. 4. Finally turn sound level of CTV to minimum.

7 NORMAL Key 1. Once in PICTURE Mode, and the NORMAL Note: If nothing is display mean
key is pressed, all the settings will be present contrast, colour, bright, tint
to normal setting. or sharpness are all in nor-
(Normal setting value for every mode). mal setting.

» CONTRAST : MAX
11 OSD Check OSD LANGUAGE quantity and type as
» COLOUR : CENTER
LANGUAGE English, Russian, Chinese, French, Arabic and
» BRIGHTNESS : CENTER
QUANTITY Malay.
» TINT : CENTER
CHECK
» SHARPNESS : CENTER

8 White Temp 1. Receive "Monoscope Pattern" signal.

2. Set FUNCTION to select WHITE TEMP.
3. Press Volume Up/Down key to check WHITE
TEMP Option, STANDARD:
NORMAL SETTING, WARM for more
REDDISH direction changing, COOL for more
BLUISH direction changing.

10-1 10-2
 HEADPHONE JACK CHECKING MEMORY MAP
NO. Adjustment part Adjusting procedure and conditions Waveform and others
ADDRESS DATA MICO EEPROM EEPROM CHASSIS CTV FINAL LAST INITIAL
1 HEADPHONE 1. Receive PAL COLOUR PAR with SOUND (HEX) D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT RANGE WRITE(CPU) CHECK DATA CHECK TYPE CHECK DATA CHECK TYPE SETTING DATA REMARK
OUTPUT 400Hz, 100% MODULATION (±50kHz Dev). 00 PASS WORD 55 00-FF

CHECKING 2. Maximum volume, and check the headphone 01 PASS WORD 4F 00-FF
02 PASS WORD 43 00-FF
output with 400Hz sound and no sound out 03 PASS WORD A1 00-FF
from speaker. 04
05
06 AGC TAKE-OVER 0E 00-3F
07 V-SLOPE 20 00-3F
08 V-AMPLITUDE 20 00-3F
09 V-CENTER 20 00-3F
0A H-CENTER 20 00-3F
0B H-SIZE 20 00-3F
0C EW-PARALLELOGRAM 20 00-3F
0D EW-PARABOLA/WIDTH 20 00-3F
0E EW-UPPER CORNER 20 00-3F
0F EW-LOWER CORNER 20 00-3F
10 EW-TRAPEZIUM 20 00-3F
11 HORIZONTAL-BOW 20 00-3F
12 S-CORRECTION 00 00-3F
13
14
15
16 DRIVE-R (STANDARD) 20 00-3F
17 DRIVE-G (STANDARD) 20 00-3F
18 DRIVE-B (STANDARD) 20 00-3F
19 DRIVE-R (WARM) 20 00-3F
1A DRIVE-G (WARM) 20 00-3F
1B DRIVE-B (WARM) 20 00-3F
1C DRIVE-R (COOL) 19 00-3F
1D DRIVE-G (COOL) 20 00-3F
1E DRIVE-B (COOL) 20 00-3F
1F
20
21
22 SUB-VOLUME 3F 00-3F
23 3F 00-3F
11

SUB-CONTRAST

24 SUB-COLOUR 20 00-3F
25 SUB-BRIGHTNESS 20 00-3F
26 SUB-TINT 20 00-3F
27 SUB-SHARPNESS 20 00-3F
28 HTL-VOLUME 20 00-3F
29 HTL-POSITION FF 00-FF
2A
2B
2C
2D OSD-REFERENCE 0F 00-0F
2E CUTOFF LEVEL -OFFSET R 08 00-0F
2F CUTOFF LEVEL -OFFSET B 08 00-0F
30 CATHODE DRIVE LEVEL 00 00-0F
31 Y-DELAY (TV PAL) 0C 00-0F
32 Y-DELAY (TV SECAM) 0F 00-0F
33 Y-DELAY (TV N358) 0C 00-0F
34 Y-DELAY (TV N443) 0C 00-0F
35 Y-DELAY (TV BW) 0C 00-0F
36 Y-DELAY (AV PAL) 0C 00-0F
37 Y-DELAY (AV SECAM) 0F 00-0F
38 Y-DELAY (AV N443) 0C 00-0F
39 Y-DELAY (AV N358) 0C 00-0F
3A Y-DELAY (AV BW) 0C 00-0F
3B COLOUR-OFFSET (PAL) 08 00-0F
3C COLOUR-OFFSET (SECAM) 08 00-0F
3D COLOUR-OFFSET (N443) 04 00-0F
3E COLOUR-OFFSET (N358) 04 00-0F
3F SHARPNESS-OFFSET (PAL) 08 00-0F
MODEL MODEL

LETTER NO. LETTER NO.

CX34K3
11-1 11-2
 CX34K3
ADDRESS DATA MICO EEPROM EEPROM CHASSIS CTV FINAL LAST INITIAL ADDRESS DATA MICO EEPROM EEPROM CHASSIS CTV FINAL LAST INITIAL
(HEX) D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT RANGE WRITE(CPU) CHECK DATA CHECK TYPE CHECK DATA CHECK TYPE SETTING DATA REMARK (HEX) D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT RANGE WRITE(CPU) CHECK DATA CHECK TYPE CHECK DATA CHECK TYPE SETTING DATA REMARK
80 TUNING FREQUANCY (HIGHER PART) POS 4
40 SHARPNESS-OFFSET (SECAM) 04 00-0F
81 TUNING FREQUANCY (LOWER PART)
41 SHARPNESS-OFFSET (N443) 0C 00-0F
82 S-SYS AFT (auto) C-SYS
42 SHARPNESS-OFFSET (N358) 08 00-0F
83 TUNING FREQUANCY (HIGHER PART) POS 5
43 84 TUNING FREQUANCY (LOWER PART)
44 FCO ACL OSO EHT EVG FFI AVL BKS 00-FF 85 S-SYS AFT (auto) C-SYS
45 SCM N443 N358 PB-SEC BG I DK M 00-FF 86 TUNING FREQUANCY (HIGHER PART) POS 6

46 SM FMWS AV BTSC HTL VMC VMI 00-FF 87 TUNING FREQUANCY (LOWER PART)

47 HP2 FSL RUS FRA CHN MLY ARB THA 00-FF 88 S-SYS AFT (auto) C-SYS

48 AGC BIL OBA 00-FF 89 TUNING FREQUANCY (HIGHER PART) POS 7

49 8A TUNING FREQUANCY (LOWER PART)

8B S-SYS AFT (auto) C-SYS

4A
8C TUNING FREQUANCY (HIGHER PART) POS 8
4B
8D TUNING FREQUANCY (LOWER PART)
4C VOLUME 01 00-3C
8E S-SYS AFT (auto) C-SYS
4D CONTRAST 3C 00-3C 8F TUNING FREQUANCY (HIGHER PART) POS 9
4E COLOUR 1E 00-3C 90 TUNING FREQUANCY (LOWER PART)
4F BRIGHTNESS 1E 00-3C 91 S-SYS AFT (auto) C-SYS

50 TINT 1E 00-3C 92 TUNING FREQUANCY (HIGHER PART) POS 10

51 SHARPNESS 1E 00-3C 93 TUNING FREQUANCY (LOWER PART)

52 94 S-SYS AFT (auto) C-SYS

53 95 TUNING FREQUANCY (HIGHER PART) POS 11

96 TUNING FREQUANCY (LOWER PART)

54
97 S-SYS AFT (auto) C-SYS
55 POSITION/AV1/AV2 01 00-FF
98 TUNING FREQUANCY (HIGHER PART) POS 12
56 FAV-POS A 0A 00-FF
99 TUNING FREQUANCY (LOWER PART)
57 FAV-POS B 14 00-FF 9A S-SYS AFT (auto) C-SYS
58 FAV-POS C 1E 00-FF 9B TUNING FREQUANCY (HIGHER PART) POS 13
59 FAV-POS D 28 00-FF 9C TUNING FREQUANCY (LOWER PART)

5A 9D S-SYS AFT (auto) C-SYS

5B 9E TUNING FREQUANCY (HIGHER PART) POS 14

5C POWER 00 00-01 9F TUNING FREQUANCY (LOWER PART)

5D WHITE-TEMP 00 00-02 A0 S-SYS AFT (auto) C-SYS

A1 TUNING FREQUANCY (HIGHER PART) POS 15

5E BLUE BACK 00 00-01
A2 TUNING FREQUANCY (LOWER PART)
5F LANGUAGE 00 00-07
A3 S-SYS AFT (auto) C-SYS
60 DIGIT 00 00-01
A4 TUNING FREQUANCY (HIGHER PART) POS 16
61 A5 TUNING FREQUANCY (LOWER PART)
62 SKIP 0 SKIP 1 SKIP 2 SKIP 3 SKIP 4 SKIP 5 SKIP 6 SKIP 7 80 00-FF A6 S-SYS AFT (auto) C-SYS
63 00 00-FF
12

SKIP 8 SKIP 9 SKIP 10 SKIP 11 SKIP 12 SKIP 13 SKIP 14 SKIP 15 A7 TUNING FREQUANCY (HIGHER PART) POS 17

64 SKIP 16 SKIP 17 SKIP 18 SKIP 19 SKIP 20 SKIP 21 SKIP 22 SKIP 23 00 00-FF A8 TUNING FREQUANCY (LOWER PART)

65 SKIP 24 SKIP 25 SKIP 26 SKIP 27 SKIP 28 SKIP 29 SKIP 30 SKIP 31 00 00-FF A9 S-SYS AFT (auto) C-SYS

66 SKIP 32 SKIP 33 SKIP 34 SKIP 35 SKIP 36 SKIP 37 SKIP 38 SKIP 39 00 00-FF AA TUNING FREQUANCY (HIGHER PART) POS 18

67 SKIP 40 SKIP 41 SKIP 42 SKIP 43 SKIP 44 SKIP 45 SKIP 46 SKIP 47 00 00-FF AB TUNING FREQUANCY (LOWER PART)

AC S-SYS AFT (auto) C-SYS

68 SKIP 48 SKIP 49 SKIP 50 SKIP 51 SKIP 52 SKIP 53 SKIP 54 SKIP 55 00 00-FF
AD TUNING FREQUANCY (HIGHER PART) POS 19
69 SKIP 56 SKIP 57 SKIP 58 SKIP 59 SKIP 60 SKIP 61 SKIP 62 SKIP 63 00 00-FF
AE TUNING FREQUANCY (LOWER PART)
6A SKIP 64 SKIP 65 SKIP 66 SKIP 67 SKIP 68 SKIP 69 SKIP 70 SKIP 71 00 00-FF
AF S-SYS AFT (auto) C-SYS
6B SKIP 72 SKIP 73 SKIP 74 SKIP 75 SKIP 76 SKIP 77 SKIP 78 SKIP 79 00 00-FF B0 TUNING FREQUANCY (HIGHER PART) POS 20
6C SKIP 80 SKIP 81 SKIP 82 SKIP 83 SKIP 84 SKIP 85 SKIP 86 SKIP 87 00 00-FF B1 TUNING FREQUANCY (LOWER PART)
6D SKIP 88 SKIP 89 SKIP 90 SKIP 91 SKIP 92 SKIP 93 SKIP 94 SKIP 95 00 00-FF B2 S-SYS AFT (auto) C-SYS

6E SKIP 96 SKIP 97 SKIP 98 SKIP 99 00 00-FF B3 TUNING FREQUANCY (HIGHER PART) POS 21

6F B4 TUNING FREQUANCY (LOWER PART)

70 B5 S-SYS AFT (auto) C-SYS

71 B6 TUNING FREQUANCY (HIGHER PART) POS 22

B7 TUNING FREQUANCY (LOWER PART)

72
B8 S-SYS AFT (auto) C-SYS
73
B9 TUNING FREQUANCY (HIGHER PART) POS 23
74 TUNING FREQUANCY (HIGHER PART) S-SYS POS 0
BA TUNING FREQUANCY (LOWER PART)
75 TUNING FREQUANCY (LOWER PART) 000:BG BB S-SYS AFT (auto) C-SYS
76 S-SYS AFT (auto) C-SYS 001:I BC TUNING FREQUANCY (HIGHER PART) POS 24
77 TUNING FREQUANCY (HIGHER PART) O1O:DK POS 1 BD TUNING FREQUANCY (LOWER PART)

78 TUNING FREQUANCY (LOWER PART) 011:M BE S-SYS AFT (auto) C-SYS

79 S-SYS AFT (auto) C-SYS BF TUNING FREQUANCY (HIGHER PART) POS 25

7A TUNING FREQUANCY (HIGHER PART) AFT POS 2 MODEL MODEL

7B TUNING FREQUANCY (LOWER PART) 0:OFF
7C S-SYS AFT (auto) C-SYS 1:ON
7D TUNING FREQUANCY (HIGHER PART) POS 3

7E TUNING FREQUANCY (LOWER PART)

7F S-SYS AFT (auto) C-SYS

LETTER NO. LETTER NO.
MODEL MODEL

LETTER NO. LETTER NO.

12-1 12-2
 ADDRESS DATA MICO EEPROM EEPROM CHASSIS CTV FINAL LAST INITIAL ADDRESS DATA MICO EEPROM EEPROM CHASSIS CTV FINAL LAST INITIAL
(HEX) D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT RANGE WRITE(CPU) CHECK DATA CHECK TYPE CHECK DATA CHECK TYPE SETTING DATA REMARK (HEX) D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT RANGE WRITE(CPU) CHECK DATA CHECK TYPE CHECK DATA CHECK TYPE SETTING DATA REMARK
C0 TUNING FREQUANCY (LOWER PART) POS 25 100 POS 46

C1 S-SYS AFT (auto) C-SYS 101 TUNING FREQUANCY (HIGHER PART) POS 47

C2 TUNING FREQUANCY (HIGHER PART) POS 26 102 TUNING FREQUANCY (LOWER PART)

C3 TUNING FREQUANCY (LOWER PART) 103 S-SYS AFT (auto) C-SYS

C4 S-SYS AFT (auto) C-SYS 104 TUNING FREQUANCY (HIGHER PART) POS 48

C5 TUNING FREQUANCY (HIGHER PART) POS 27 105 TUNING FREQUANCY (LOWER PART)

C6 TUNING FREQUANCY (LOWER PART) 106 S-SYS AFT (auto) C-SYS

C7 S-SYS AFT (auto) C-SYS 107 TUNING FREQUANCY (HIGHER PART) POS 49

C8 TUNING FREQUANCY (HIGHER PART) POS 28 108 TUNING FREQUANCY (LOWER PART)

C9 TUNING FREQUANCY (LOWER PART) 109 S-SYS AFT (auto) C-SYS

CA S-SYS AFT (auto) C-SYS 10A TUNING FREQUANCY (HIGHER PART) POS 50

CB TUNING FREQUANCY (HIGHER PART) POS 29 10B TUNING FREQUANCY (LOWER PART)

CC TUNING FREQUANCY (LOWER PART) 10C S-SYS AFT (auto) C-SYS

CD S-SYS AFT (auto) C-SYS 10D TUNING FREQUANCY (HIGHER PART) POS 51

CE TUNING FREQUANCY (HIGHER PART) POS 30 10E TUNING FREQUANCY (LOWER PART)

CF TUNING FREQUANCY (LOWER PART) 10F S-SYS AFT (auto) C-SYS

D0 S-SYS AFT (auto) C-SYS 110 TUNING FREQUANCY (HIGHER PART) POS 52

D1 TUNING FREQUANCY (HIGHER PART) POS 31 111 TUNING FREQUANCY (LOWER PART)

D2 TUNING FREQUANCY (LOWER PART) 112 S-SYS AFT (auto) C-SYS

D3 S-SYS AFT (auto) C-SYS 113 TUNING FREQUANCY (HIGHER PART) POS 53

D4 TUNING FREQUANCY (HIGHER PART) POS 32 114 TUNING FREQUANCY (LOWER PART)

D5 TUNING FREQUANCY (LOWER PART) 115 S-SYS AFT (auto) C-SYS

D6 S-SYS AFT (auto) C-SYS 116 TUNING FREQUANCY (HIGHER PART) POS 54

D7 TUNING FREQUANCY (HIGHER PART) POS 33 117 TUNING FREQUANCY (LOWER PART)

D8 TUNING FREQUANCY (LOWER PART) 118 S-SYS AFT (auto) C-SYS

D9 S-SYS AFT (auto) C-SYS 119 TUNING FREQUANCY (HIGHER PART) POS 55

DA TUNING FREQUANCY (HIGHER PART) POS 34 11A TUNING FREQUANCY (LOWER PART)

DB TUNING FREQUANCY (LOWER PART) 11B S-SYS AFT (auto) C-SYS

DC S-SYS AFT (auto) C-SYS 11C TUNING FREQUANCY (HIGHER PART) POS 56

DD TUNING FREQUANCY (HIGHER PART) POS 35 11D TUNING FREQUANCY (LOWER PART)

DE TUNING FREQUANCY (LOWER PART) 11E S-SYS AFT (auto) C-SYS

DF S-SYS AFT (auto) C-SYS 11F TUNING FREQUANCY (HIGHER PART) POS 57

E0 TUNING FREQUANCY (HIGHER PART) POS 36 120 TUNING FREQUANCY (LOWER PART)

E1 TUNING FREQUANCY (LOWER PART) 121 S-SYS AFT (auto) C-SYS

E2 S-SYS AFT (auto) C-SYS 122 TUNING FREQUANCY (HIGHER PART) POS 58

E3 TUNING FREQUANCY (HIGHER PART) POS 37 123 TUNING FREQUANCY (LOWER PART)

E4 TUNING FREQUANCY (LOWER PART) 124 S-SYS AFT (auto) C-SYS

E5 S-SYS AFT (auto) C-SYS 125 TUNING FREQUANCY (HIGHER PART) POS 59

E6 TUNING FREQUANCY (HIGHER PART) POS 38 126 TUNING FREQUANCY (LOWER PART)
13

E7 TUNING FREQUANCY (LOWER PART) 127 S-SYS AFT (auto) C-SYS

E8 S-SYS AFT (auto) C-SYS 128 TUNING FREQUANCY (HIGHER PART) POS 60

E9 TUNING FREQUANCY (HIGHER PART) POS 39 129 TUNING FREQUANCY (LOWER PART)

EA TUNING FREQUANCY (LOWER PART) 12A S-SYS AFT (auto) C-SYS

EB S-SYS AFT (auto) C-SYS 12B TUNING FREQUANCY (HIGHER PART) POS 61

EC TUNING FREQUANCY (HIGHER PART) POS 40 12C TUNING FREQUANCY (LOWER PART)

ED TUNING FREQUANCY (LOWER PART) 12D S-SYS AFT (auto) C-SYS

EE S-SYS AFT (auto) C-SYS 12E TUNING FREQUANCY (HIGHER PART) POS 62

EF TUNING FREQUANCY (HIGHER PART) POS 41 12F TUNING FREQUANCY (LOWER PART)

F0 TUNING FREQUANCY (LOWER PART) 130 S-SYS AFT (auto) C-SYS

F1 S-SYS AFT (auto) C-SYS 131 TUNING FREQUANCY (HIGHER PART) POS 63

F2 TUNING FREQUANCY (HIGHER PART) POS 42 132 TUNING FREQUANCY (LOWER PART)

F3 TUNING FREQUANCY (LOWER PART) 133 S-SYS AFT (auto) C-SYS

F4 S-SYS AFT (auto) C-SYS 134 TUNING FREQUANCY (HIGHER PART) POS 64

F5 TUNING FREQUANCY (HIGHER PART) POS 43 135 TUNING FREQUANCY (LOWER PART)

F6 TUNING FREQUANCY (LOWER PART) 136 S-SYS AFT (auto) C-SYS

F7 S-SYS AFT (auto) C-SYS 137 TUNING FREQUANCY (HIGHER PART) POS 65

F8 TUNING FREQUANCY (HIGHER PART) POS 44 138 TUNING FREQUANCY (LOWER PART)

F9 TUNING FREQUANCY (LOWER PART) 139 S-SYS AFT (auto) C-SYS

FA S-SYS AFT (auto) C-SYS 13A TUNING FREQUANCY (HIGHER PART) POS 66

FB TUNING FREQUANCY (HIGHER PART) POS 45 13B TUNING FREQUANCY (LOWER PART)

FC TUNING FREQUANCY (LOWER PART) 13C S-SYS AFT (auto) C-SYS

FD S-SYS AFT (auto) C-SYS 13D TUNING FREQUANCY (HIGHER PART) POS 67

FE POS 46 13E TUNING FREQUANCY (LOWER PART)

FF 13F S-SYS AFT (auto) C-SYS

MODEL MODEL MODEL MODEL

LETTER NO. LETTER NO. LETTER NO. LETTER NO.

CX34K3
13-1 13-2
 CX34K3
ADDRESS DATA MICO EEPROM EEPROM CHASSIS CTV FINAL LAST INITIAL ADDRESS DATA MICO EEPROM EEPROM CHASSIS CTV FINAL LAST INITIAL
(HEX) D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT RANGE WRITE(CPU) CHECK DATA CHECK TYPE CHECK DATA CHECK TYPE SETTING DATA REMARK (HEX) D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT RANGE WRITE(CPU) CHECK DATA CHECK TYPE CHECK DATA CHECK TYPE SETTING DATA REMARK
140 TUNING FREQUANCY (HIGHER PART) POS 68 180 POS 89

141 TUNING FREQUANCY (LOWER PART) 181

142 S-SYS AFT (auto) C-SYS 182 TUNING FREQUANCY (HIGHER PART) POS 90

143 TUNING FREQUANCY (HIGHER PART) POS 69 183 TUNING FREQUANCY (LOWER PART)

144 TUNING FREQUANCY (LOWER PART) 184 S-SYS AFT (auto) C-SYS

145 S-SYS AFT (auto) C-SYS 185 TUNING FREQUANCY (HIGHER PART) POS 91

146 TUNING FREQUANCY (HIGHER PART) POS 70 186 TUNING FREQUANCY (LOWER PART)

147 TUNING FREQUANCY (LOWER PART) 187 S-SYS AFT (auto) C-SYS

148 S-SYS AFT (auto) C-SYS 188 TUNING FREQUANCY (HIGHER PART) POS 92

149 TUNING FREQUANCY (HIGHER PART) POS 71 189 TUNING FREQUANCY (LOWER PART)

14A TUNING FREQUANCY (LOWER PART) 18A S-SYS AFT (auto) C-SYS

14B S-SYS AFT (auto) C-SYS 18B TUNING FREQUANCY (HIGHER PART) POS 93

14C TUNING FREQUANCY (HIGHER PART) POS 72 18C TUNING FREQUANCY (LOWER PART)

14D TUNING FREQUANCY (LOWER PART) 18D S-SYS AFT (auto) C-SYS

14E S-SYS AFT (auto) C-SYS 18E TUNING FREQUANCY (HIGHER PART) POS 94

14F TUNING FREQUANCY (HIGHER PART) POS 73 18F TUNING FREQUANCY (LOWER PART)

150 TUNING FREQUANCY (LOWER PART) 190 S-SYS AFT (auto) C-SYS

151 S-SYS AFT (auto) C-SYS 191 TUNING FREQUANCY (HIGHER PART) POS 95

152 TUNING FREQUANCY (HIGHER PART) POS 74 192 TUNING FREQUANCY (LOWER PART)

153 TUNING FREQUANCY (LOWER PART) 193 S-SYS AFT (auto) C-SYS

154 S-SYS AFT (auto) C-SYS 194 TUNING FREQUANCY (HIGHER PART) POS 96

155 TUNING FREQUANCY (HIGHER PART) POS 75 195 TUNING FREQUANCY (LOWER PART)

156 TUNING FREQUANCY (LOWER PART) 196 S-SYS AFT (auto) C-SYS

157 S-SYS AFT (auto) C-SYS 197 TUNING FREQUANCY (HIGHER PART) POS 97

158 TUNING FREQUANCY (HIGHER PART) POS 76 198 TUNING FREQUANCY (LOWER PART)

159 TUNING FREQUANCY (LOWER PART) 199 S-SYS AFT (auto) C-SYS

15A S-SYS AFT (auto) C-SYS 19A TUNING FREQUANCY (HIGHER PART) POS 98

15B TUNING FREQUANCY (HIGHER PART) POS 77 19B TUNING FREQUANCY (LOWER PART)

15C TUNING FREQUANCY (LOWER PART) 19C S-SYS AFT (auto) C-SYS

15D S-SYS AFT (auto) C-SYS 19D TUNING FREQUANCY (HIGHER PART) POS 99

15E TUNING FREQUANCY (HIGHER PART) POS 78 19E TUNING FREQUANCY (LOWER PART)

15F TUNING FREQUANCY (LOWER PART) 19F S-SYS AFT (auto) C-SYS

160 S-SYS AFT (auto) C-SYS 1A0 AV1

161 TUNING FREQUANCY (HIGHER PART) POS 79 1A1

162 TUNING FREQUANCY (LOWER PART) 1A2 (auto) C-SYS

163 S-SYS AFT (auto) C-SYS 1A3 AV2

164 TUNING FREQUANCY (HIGHER PART) POS 80 1A4

165 TUNING FREQUANCY (LOWER PART) 1A5 (auto) C-SYS

166 S-SYS AFT (auto) C-SYS 1A6

14

167 TUNING FREQUANCY (HIGHER PART) POS 81 1A7

168 TUNING FREQUANCY (LOWER PART) 1A8
169 S-SYS AFT (auto) C-SYS 1A9
16A TUNING FREQUANCY (HIGHER PART) POS 82 1AA
16B TUNING FREQUANCY (LOWER PART) 1AB
16C S-SYS AFT (auto) C-SYS 1AC
16D TUNING FREQUANCY (HIGHER PART) POS 83 1AD
16E TUNING FREQUANCY (LOWER PART) 1AE
16F S-SYS AFT (auto) C-SYS 1AF
170 TUNING FREQUANCY (HIGHER PART) POS 84 1B0
171 TUNING FREQUANCY (LOWER PART) 1B1
172 S-SYS AFT (auto) C-SYS 1B2
173 TUNING FREQUANCY (HIGHER PART) POS 85 1B3
174 TUNING FREQUANCY (LOWER PART) 1B4
175 S-SYS AFT (auto) C-SYS 1B5
176 TUNING FREQUANCY (HIGHER PART) POS 86 1B6
177 TUNING FREQUANCY (LOWER PART) 1B7
178 S-SYS AFT (auto) C-SYS 1B8
179 TUNING FREQUANCY (HIGHER PART) POS 87 1B9
17A TUNING FREQUANCY (LOWER PART) 1BA
17B S-SYS AFT (auto) C-SYS 1BB
17C TUNING FREQUANCY (HIGHER PART) POS 88 1BC
17D TUNING FREQUANCY (LOWER PART) 1BD
17E S-SYS AFT (auto) C-SYS 1BE
17F POS 89 1BF
MODEL MODEL MODEL MODEL

LETTER NO. LETTER NO. LETTER NO. LETTER NO.

14-1 14-2
 ADDRESS
(HEX) D7 D6 D5 D4
DATA
D3 D2 D1 D0
MICO
DEFAULT
EEPROM
RANGE
EEPROM CHASSIS CTV FINAL LAST INITIAL
WRITE(CPU) CHECK DATA CHECK TYPE CHECK DATA CHECK TYPE SETTING DATA REMARK
UA1 HOTEL MODE APPLICATION
1C0
1C1
1C2 How to enable/disable the "Hotel Mode" ?
1C3
1C4 Ans: a) Press the R/C (FUNCTION) {1} key until language selection appear, within five second
1C5
1C6
press the (one/two digit) {2} key and keep pressing it for five second, then you can
1C7 see the hotel mode with four digits password.
1C8
1C9
1CA b) Key in the four digits password starting with number "1", "3", "7", "9", then the hotel
1CB
1CC mode will be enable, you can switch on/off the hotel mode by using R/C (volume up/
1CD
1CE
down) {3} key.
1CF
1D0
1D1
1D2
1D3 HOTEL ON Set vol up/down by R/C key.
1D4 PASSWORD ****
1D5
1D6 Input 1, 3, 7 and 9 by R/C key.
1D7
1D8
1D9
1DA
1DB
1DC
#1 Ch 1 is your selected
1DD
* We recommend channel for hotel mode.
1DE
1DF Before set the hotel mode, it is better to choose ch 1 & set s-vol level Up to 75% full scale.
1E0
1E1 After set hotel mode, starting channel will be always ch 1 & maximum sound level out will
1E2
be set the half of full scale.
1E3
1E4 * If you set hotel mode in AV, starting channel will be the last ch which you received before
1E5
1E6
power off (same as normal operation)
15

1E7
1E8
1E9
1EA
1EB CONDITION:
1EC
1ED
1EE
When using hotel mode, user can control "contrast", "brightness", "sharpness" and "tint"
1EF
1F0 function.
1F1
1F2
But after power off, it will return to the initial setting.
1F3 You can't use:--
1F4
1F5 Preset mode
1F6
Fine tuning
1F7
1F8 Skip mode
1F9
1FA
System selection
1FB The others function is allowed to be used.
1FC
1FD
1FE
1FF
MODEL MODEL

LETTER NO. LETTER NO.

CX34K3
15-1 15-2
 CX34K3
TROUBLE SHOOTING TABLE TROUBLE SHOOTING TABLE (Continued)
CIRCUITS TO BE CHECKED:
NO RASTER » Tuner. NO PICTURE, NO SOUND
» PIF.
» Automatic Gain Control.
Check F701. Blown out. » (5V), (32V) Power Source. Does the noise level increase at max.
Contrast, Brightness and Sound controls ?

Normal Replace the fuse.

Noise increases but no signal is
No snow noise.
received.
Abnormal Check pin (7) of T701 voltage.
The fuse is again blown out.
(Approx. 310V at 220V AC)
Does noise or signal appear at pin (40)
Check the tuner supply voltage LB must of IC801 ?
Check R701, R707 and be approx. 5V, BT must be approx. 32V.
Normal Check IC701, D701, C707 and CH preset data check. NO YES
D709. and D710.
Does noise or Check IC801 and
Check Secondary Main+B Normal signal appear at its related circuit.
(Approx. 115V) pin (38) of IC801 ?
Abnormal Normal
Check the tuner AGC at NO YES
TP201.
Check IC702, IC753, D758 Check CRT connector D1001 (Power LED Green)
Normal Abnormal Check pin (1) of
and D762. K1-K5 bias. YES turns on. Check Q205 and
SF201, Tuner and
related circuit.
NO related circuit.
Normal Normal Abnormal Check pin (27) of Check pin (37) of
Check pin (38) of
D1001 (Power LED Red) IC801, Tuner and IC801 and related
IC801.
turns on or turns ON/OFF. related circuit. circuit.
16

Check R615 and R618. Check Check ON/OFF ON

C878. IC801.
Checking the
protector circuit.

Does horizontal circuit

oscillate ? CIRCUITS TO BE CHECKED:
NO » Sound system pins (28) NO SOUND
and (44) of IC801.
» Sound Detector Circuit.
Check IC751 and IC801. » Sound Switch and Att. NO
Does noise signal appear at Does signal appear at pins (28)
Control. pin (44) of IC801 ? of IC801?
» Audio Output Circuit.
YES YES NO
(Signal)

Check C356
Does signal appear at pins NO and peripheral Check IC801.
(6) and (8) of IC301 ? circuit.
YES

Check P301, P302, IC301 Check Q301, pins (4) and (6)
and peripheral circuit. of IC801 and peripheral
circuit.

16-1 16-2
 TROUBLE SHOOTING TABLE (Continued) TROUBLE SHOOTING TABLE (Continued)

NEITHER VERTICAL NOR NO SPECIFIC COLOUR

HORIZONTAL SYNCHRONIZATION
NO Is some colour produced in YES
CIRCUIT TO BE CHECKED: B/W broadcast reception ?
» Sync. Separator Circuit.
Check pins (16), (17) and
(34) of IC801. YES
Check IC801, R801, R802, Is the white balance properly
R803, D804, 805, D806 and adjusted ?
Q801.
NO

Readjust the white balance.

DEFECTIVE VERTICAL AMP.
AND VERTICAL LINEARITY

The picture colour is cyan. The picture colour is magenta. The picture colour is yellow.
Readjust vertical size.
(Bas Data)

Check Q871, Q883 and its Check Q870, Q885 and its Check Q872, Q887 and its
Vertical linearity and size adjacent circuits. adjacent circuits. adjacent circuits.
17

abnormal.

Check R504, R503, R506,

R513, C517 and D501.

NO SPECIFIC COLOUR
“PAL”
(NO COLOUR SYNCHRONIZATION)
NO VERTICAL SCAN

Check IC801 and bias

Check IC501 bias. control circuit.

Normal Abnormal Normal

Check C503 and C507. Check IC501. Check X1001(12 MHz).

CX34K3
17-1 17-2
CX34K3

SOLID STATE DEVICE BASE DIAGRAM

TOP VIEW
COLLECTOR
8 5 4 3 COLLECTOR

2R :BR:

BASE EMITTER
1 4 1 2 BASE EMITTER

M24C04W FX0008GE D601A B709A

COLLECTOR
64 33

JC

BASE EMITTER
1 32

IX3368CE 2SC2735

SIDE VIEW

+ ~ ~ -

BASE
COLLECTOR 1 2 3
BASE
EMITTER COLLECTOR
EMITTER SE115N
2SA1015 PST573J DX0386CE
2SC1815 2SC2482

ANODE
(RED)
CATHODE
(COMMON)
ANODE
(GREEN)

1 12
1 2 3 B C E
TDA7056A
KA7808 2SC4517
B C E PX0423CE KA7805
2SD2586

B C E
1 3 2 4
1 8 1 3 5 9
TF321S
TA48M033
LA7016 STRF6654 TDA8357

18
 CX34K3

CHASSIS LAYOUT
H

1 2 3 4 5 6

19
 CX34K3

BLOCK DIAGRAM
H

1 2 3 4 5 6 7 8 9 10 11 12

20 21
CX34K3

1 2 3 4 5 6

22
 CX34K3

WAVEFORMS
H

1 1.0 Vp-p 2 2.5 Vp-p (H) 3 2.55 Vp-p (H) 4 3.35 Vp-p (H) 5 68.0 Vp-p (H)

E 6 66.0 Vp-p (H) 7 72.0 Vp-p (H) 8 3.0 Vp-p (H) 9 1.85 Vp-p (H) 0 150.0 Vp-p (H)

q 8.4 Vp-p (H) w 1.3 Vp-p (H) e 0.98 Vp-p (H) r 43.0 Vp-p (H) t 190.0 Vp-p (H)

y 1,050 Vp-p (H) u 2.4 Vp-p (H) i 500 Vp-p (H)

1 2 3 4 5 6

23
CX34K3

DESCRIPTION OF SCHEMATIC DIAGRAM

SAFETY NOTES: NOTES:
H1. DISCONNECT THE AC PLUG FROM THE AC OUTLET BEFORE 1. The unit of resistance “ohm” is omitted.
REPLACING PARTS. (K = 1000 ohms, M = Meg ohm).
2. SEMICONDUCTOR HEAT SINKS SHOULD BE REGARDED AS 2. All resistors are 1/16 watt, unless otherwise noted.
POTENTIAL SHOCK HAZARDS WHEN THE CHASSIS IS OP- 3. All capacitors are µF, unless therwise noted. (P = µµF).
ERATING.
VOLTAGE MEASUREMENT CONDITIONS:
IMPORTANT SAFETY NOTICE: 1. Voltage in parenthesis measured with no Signal.
PARTS MARKED WITH “å ” ( ) ARE IMPORTANT FOR 2. Voltages without parenthesis measured with PAL Colour-Signal.
GMAINTAINING THE SAFETY OF THE SET. BE SURE TO RE- 3. All the voltages in each point are measured with high impedence
PLACE THESE PARTS WITH SPECIFIED ONES FOR MAINTAIN- volt-meter.
ING THE SAFETY AND PERFORMANCE OF THE SET.
WAVEFORM MEASUREMENT CONDITIONS:
SERVICE PRECAUTION: 1. Colour bar generator signal of 1.8V peak to peak applied at Base
THE AREA ENCLOSED BY THIS LINE ( ) IS DIRECTLY of Video Buffer Amp. Q200.
CONNECTED WITH AC MAINS VOLTAGE. 2. Approximately 4.0 V AGC bias.
WHEN SERVICING THE AREA, CONNECT AN ISOLATING TRANS-
FORMER BETWEEN TV RECEIVER AND AC LINE TO ELIMINATE
FHAZARD OF ELECTRIC SHOCK.

Ë Infrared Remote Control Unit RRMCG1342PESA

NOTE : The parts here shown are supplied as an assembly but not independently.

1 2 3 4 5 6

24
 CX34K3

Ë Tuner å VTUVTST5HD84/
NOTE : The parts here shown are supplied as an assembly but not independently.

1 2 3 4 5 6

25
 CX34K3

SCHEMATIC DIAGRAM: MAIN Unit

H

1 2 3 4 5 6 7 8 9 10 11 12

26 27
CX34K3

SCHEMATIC DIAGRAM: CRT and HEADPHONE Unit

H

1 2 3 4 5 6

28
 CX34K3

PRINTED WIRING BOARD ASSEMBLIES

H

PWB-B: CRT Unit (Wiring Side)

E

(Component Side) (Chip Parts Side)

PWB-C: HEADPHONE Unit

B

10 111 12 2 13 143 15 4 16 17 5 18 6 19

29
 CX34K3

PWB-A: MAIN Unit (Component Side)

1 2 3 4 5 6 7 8 9 10 11 12

30 31
 CX34K3

PWB-A: MAIN Unit (Chip Parts Side)

1 2 3 4 5 6 7 8 9 10 11 12

32 33
CX34K3

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code

PARTS LIST IC753

IC801
VHiSE115N//-1
RH-iX3368CEN0
R
R
SE115N
I.C.
AF
BE
IC1002 VHiPST573J/-1 R I.C. AE
PARTS REPLACEMENT IC1003 VHiM24C04W/-1 R I.C. AG
Replacement parts which have these special safety characteristics IC1005 VHiKA7805Pi-1 J KA7805PI AE
identified in this manual: electrical components having such features
are identified by "å" in the Replacement Parts Lists. TRANSISTORS
The use of a substitute replacement part which does not have the Q201 VS2SC2735//1E R 2SC2735 AC
same safety characteristics as the factory recommended replace- Q203 VS2SD601A//-1 R 2SD601A AC
ment parts shown in this service manual may create shock, fire or Q205 VS2SC1815GW-1 R 2SC1815GW AB
other hazards. Q301 VS2SD601A//-1 R 2SD601A AC
Q302 VS2SD601A//-1 R 2SD601A AC
"HOW TO ORDER REPLACEMENT PARTS" Q305 VS2SD601A//-1 R 2SD601A AC
Q601 VS2SC2482//-1 R 2SC2482 AD
To have your order filled promptly and correctly, please furnish the Q602 VS2SD1877//1E R 2SD1877 AL
following informations. Q603 VS2SD601A//-1 R 2SD601A AC
Q710 VS2SC4517//-1 R 2SC4517 AG
1. MODEL NUMBER 2. REF. NO. Q711 VS2SD601A//-1 R 2SD601A AC
3. PART NO. 4. DESCRIPTION Q723 VS2SD601A//-1 R 2SD601A AC
Q751 VS2SA1015G/1E R 2SA1015G AC
5. CODE 6. QUANTITY Q752 VS2SC1815GW-1 R 2SC1815GW AB
Q753 VS2SC1815GW-1 R 2SC1815GW AB
MARK ★: SPARE PARTS-DELIVERY SECTION Q801 VS2SB709A//-1 R 2SB709A AA
Q802 VS2SB709A//-1 R 2SB709A AA
Q1003 VS2SD601A//-1 R 2SD601A AC
Q1010 VS2SD601A//-1 R 2SD601A AC
Ref. No. Part No. ★ Description Code
DIODES
D201 RH-EX0676GEZZ R Zener Diode AA
PICTURE TUBE D301 RH-DX0475CEZZ R Diode AB
D305 RH-EX0631GEZZ R Zener Diode AA
å V1 VB370BVBK1S-S R Picture Tube BZ D308 RH-EX0631GEZZ R Zener Diode AA
or (DY: H0160PE) D310 RH-DX0302CEZZ R Diode AC
VB37GDA86X/1E Picture Tube CB D401 RH-EX0631GEZZ R Zener Diode AA
(DY: H0149PEZZ) D402 RH-EX0631GEZZ R Zener Diode AA
LHLDW0003PEKZ J ADG Coil Holder, x3 AB D501 RH-EX0640GEZZ R Zener Diode AA
MSPRT0001PEFJ J Spring AC D502 RH-DX0475CEZZ R Diode AB
PMAGF3006CEZZ R Purity Magnet AK D503 RH-DX0475CEZZ R Diode AB
PSPAG0004PEZZ J Wedge (Gum), x3 AB D504 RH-DX0475CEZZ R Diode AB
QEARC1422PEZZ J Grounding Strap AD D505 RH-DX0127CEZZ R Diode AC
RCiLG0068PEZZ J Degaussing Coil AH D507 RH-DX0475CEZZ R Diode AB
RCiLH0160PEZZ J Deflection Yoke BC D508 RH-EX0647GEZZ R Zener Diode AA
or (CRT: B370BVBK1S) D509 RH-EX0647GEZZ R Zener Diode AA
RCiLH0149PEZZ Deflection Yoke BA D510 RH-EX0867CEZZ R Zener Diode AC
(CRT: B37GDA86X) D511 RH-EX0867CEZZ R Zener Diode AC
D512 RH-DX0475CEZZ R Diode AB
D513 RH-DX0475CEZZ R Diode AB
D514 RH-EX0903CEZZ R Zener Diode AC
PRINTED WIRING BOARD ASSEMBLIES D515
D602
RH-EX0903CEZZ
RH-DX0475CEZZ
R
R
Zener Diode
Diode
AC
AB
(NOT REPLACEMENT ITEM) D603 RH-DX0062CEZZ R Diode AD
D604 RH-DX0475CEZZ R Diode AB
PWB-A DUNTK9988WEY2 – MAIN Unit — D605 RH-EX0840CEZZ R Zener Diode AC
PWB-B DUNTK9990WEV0 – CRT Unit — D606 RH-DX0475CEZZ R Diode AB
PWB-C DUNTK9989WEV0 – HEADPHONE Unit — D607 RH-EX0662GEZZ R Zener Diode AB
D608 RH-EX0604GEZZ R Zener Diode AB
D609 RH-DX0475CEZZ R Diode AB
D610 RH-EX0662GEZZ R Zener Diode AB
PWB-A DUNTK9988WEY2 D611 RH-DX0302CEZZ R Diode AC
MAIN UNIT D612 RH-EX0627GEZZ R Zener Diode AA
D613 RH-DX0475CEZZ R Diode AB
TUNER D614 RH-DX0475CEZZ R Diode AB
NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN D701 RH-DX0386CEZZ R Diode AG
ASSEMBLY BUT NOT INDEPENDENTLY. D702 VHD1SS82///1A R Diode AC
å TU201 VTUVTST5HD84/ R VHF Tuner BB D705 RH-DX0492CEZZ R Diode AE
D706 VHD1SS82///1A R Diode AC
INTEGRATED CIRCUITS D707 VHD1SS82///1A R Diode AC
IC301 VHiTDA7056A-1 R TDA7056A AP D708 RH-DX0400CEZZ R Diode AC
IC304 VHiLA7016//-1 R LA7016 AH D709 RH-DX0164CEZZ R Diode AC
IC402 VHiLA7016//-1 R LA7016 AH D710 RH-EX0601GEZZ R Zener Diode AA
IC501 VHiTDA8357/-1 R I.C. AN D711 VHD1SS82///1A R Diode AC
IC605 VHiKA7808Pi-1 J KA7808PI AF D712 VHD1SS82///1A R Diode AC
IC701 VHiSTRF6653-1 R I.C. AS D713 RH-EX0621GEZZ R Zener Diode AB
å IC702 RH-FX0008GEZZ R PC123FY8 AE D714 RH-DX0055TAZZ R Diode AD
IC751 VHiTA48M033-1 R TA48M033F AH D715 RH-DX0055TAZZ R Diode AD

34
 CX34K3

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code

D716 RH-EX0615GEZZ R Zener Diode AA C303 VCEA0A1CW106M R 10 16V Electrolytic AB

D718 RH-EX0649GEZZ R Zener Diode AB C304 VCQYTA1HM473J R 0.047 50V Mylar AA
D719 RH-EX0649GEZZ R Zener Diode AB C305 VCQYTA1HM473J R 0.047 50V Mylar AA
D751 RH-DX0471CEZZ R Diode AE C312 VCQYTA1HM123J R 0.012 50V Mylar AA
D752 RH-DX0475CEZZ R Diode AB C314 VCEA0A1EW477M R 470 25V Electrolytic AD
D753 RH-DX0471CEZZ R Diode AE C315 VCKYPA1HF103Z R 0.01 50V Ceramic AA
D756 RH-DX0471CEZZ R Diode AE C317 VCEA0A1HW224M R 0.22 50V Electrolytic AB
D757 RH-DX0471CEZZ R Diode AE C318 VCKYCY1HB102K R 1000p 50V Ceramic AA
D758 RH-DX0461CEZZ R Diode AG C331 VCEA0A1HW105M R 1.0 50V Electrolytic AB
D759 RH-EX0716GEZZ R Zener Diode AB C332 VCEA0A1EW477M R 470 25V Electrolytic AD
D760 RH-DX0475CEZZ R Diode AB C333 VCKYPA2HB102K R 1000p 500V Ceramic AA
D761 RH-DX0475CEZZ R Diode AB C356 VCKYCY1HB682K R 6800p 50V Ceramic AA
D762 VHDTF321S//-1 R Diode AH C359 VCEA9M1CW106M R 10 16V Electrolytic AB
D801 RH-DX0475CEZZ R Diode AB C360 VCEA9M1HW225M R 2.2 50V Electrolytic AB
D802 RH-DX0475CEZZ R Diode AB C364 VCEA0A1CW106M R 10 16V Electrolytic AB
D803 RH-DX0475CEZZ R Diode AB C371 VCEA0A1CW476M R 47 16V Electrolytic AB
D804 RH-DX0475CEZZ R Diode AB C373 VCEA0A1CW107M R 100 16V Electrolytic AC
D805 RH-DX0475CEZZ R Diode AB C374 VCEA0A1HW225M R 2.2 50V Electrolytic AB
D806 RH-DX0475CEZZ R Diode AB C375 VCEAEA1HW225M R 2.2 50V Electrolytic AB
D1001 RH-PX0423CEZZ R LED, Power (Red/Green) AD C377 VCEA0A1HW225M R 2.2 50V Electrolytic AB
D1004 RH-DX0475CEZZ R Diode AB C379 VCEA0A1HW335M R 3.3 50V Electrolytic AB
D1007 RH-EX0867CEZZ R Zener Diode AC C390 VCEA0A1HW105M R 1.0 50V Electrolytic AB
D1008 RH-EX0867CEZZ R Zener Diode AC C405 VCEA0A1CW107M R 100 16V Electrolytic AC
D1009 RH-EX0867CEZZ R Zener Diode AC C406 VCEA0A1CW477M R 470 16V Electrolytic AC
D1010 RH-EX0867CEZZ R Zener Diode AC C407 VCEA0A1CW106M R 10 16V Electrolytic AB
å VA700 RH-VX0047CEZZ R Varistor AF C408 VCEA0A1CW106M R 10 16V Electrolytic AB
C409 VCKYCY1EF104Z R 0.1 25V Ceramic AA
PACKAGED CIRCUITS C410 VCKYCY1EF104Z R 0.1 25V Ceramic AA
PR702 RMPTP0028CEZZ R Packaged Circuit AG C411 VCKYCY1HB102K R 1000p 50V Ceramic AA
X1001 RCRSB0281CEZZ R Crystal AG C469 VCEA0A1HW105M R 1.0 50V Electrolytic AB
C501 VCKYCY1HF103Z R 0.01 50V Ceramic AA
FILTERS AND COILS C502 VCKYCY1HF103Z R 0.01 50V Ceramic AA
CF202 RFiLC0318CEZZ R Ceramic Filter AG C503 VCEA0A1EW108M R 1000 25V Electrolytic AD
L202 VP-DF270K0000 R Peaking 27µH AB C504 VCKYCY1HF223Z R 0.022 50V Ceramic AB
L203 VP-DF270K0000 R Peaking 27µH AB C506 VCQYTA1HM104J R 0.1 50V Mylar AA
L204 VP-XF1R2K0000 R Peaking 1.2µH AB C507 VCEA0A1JW107M R 100 63V Electrolytic AC
L205 VP-DF1R0K0000 R Peaking 1µH AB C508 VCQYTA1HM103J R 0.01 50V Mylar AA
L207 VP-DF1R0K0000 R Peaking 1µH AB C512 VCKYCY1HB102K R 1000p 50V Ceramic AA
L209 VP-XF6R8K0000 R Peaking 6.8µH AB C513 VCKYCY1HB102K R 1000p 50V Ceramic AA
L301 VP-DF1R0K0000 R Peaking 1µH AB C514 VCKYPA1HF103Z R 0.01 50V Ceramic AA
L401 VP-DF1R0K0000 R Peaking 1µH AB C515 VCKYPA2HB102K R 1000p 500V Ceramic AA
L601 VP-CF1R0M0000 R Peaking 1µH AB C516 VCEA0A1JW477M R 470 63V Electrolytic AE
L603 RCiLP0225CEZZ R Coil AF C517 VCFYFA1HA104J R 0.1 50V Mylar AA
å L701 RCiLF0021PEZZ J Coil AK C601 VCEAGA2EW106M R 10 250V Electrolytic AC
å L702 RCiLF0036PEZZ J Coil AN C602 VCQYTA1HM104J R 0.1 50V Mylar AA
L802 VP-DF100K0000 R Peaking 10µH AB C603 VCEA0A1HW105M R 1.0 50V Electrolytic AB
L803 VP-DF100K0000 R Peaking 10µH AB C604 VCEA0A1HW105M R 1.0 50V Electrolytic AB
L1030 VP-DF100K0000 R Peaking 10µH AB C605 VCKYPA1HF103Z R 0.01 50V Ceramic AA
L1050 VP-DF100K0000 R Peaking 10µH AB C606 VCKYCY1HF103Z R 0.01 50V Ceramic AA
L1051 VP-DF100K0000 R Peaking 10µH AB C607 VCEA0A1CW477M R 470 16V Electrolytic AC
SF201 RFiLC0442CEZZ R SAW Filter AL C608 VCEA0A1EW476M R 47 25V Electrolytic AB
C609 VCEA0A1EW108M R 1000 25V Electrolytic AD
TRANSFORMERS C610 VCFYSB2EB823J R 0.082 250V Mylar AD
å T602 RTRNF0193PEZZ J H-Volt Transformer AZ C611 VCKYPA2HB102K R 1000p 500V Ceramic AA
å T603 RTRNZ0179CEZZ R Transformer AE C612 RC-EZ0724CEZZ R 100 160V Electrolytic AG
å T701 RTRNZ0140PEZZ J Transformer AQ C613 VCFPPB2EB394J R 0.39 250V Polypro Film AF
C614 RC-KZ0035CEZZ R Capacitor AB
CAPACITORS C615 VCFPVC2DB224J R 0.22 200V Polypro Film AE
C200 VCEA0A1CW476M R 47 16V Electrolytic AB C616 VCFPPD3CA622H R 6200p 1.6kV Polypro Film AE
C203 VCKYCY1HF103Z R 0.01 50V Ceramic AA C617 VCKYPA2HB102K R 1000p 500V Ceramic AA
C204 VCEA0A1CW107M R 100 16V Electrolytic AC C620 VCKYCY1EF104Z R 0.1 25V Ceramic AA
C205 VCKYCY1HF103Z R 0.01 50V Ceramic AA C623 VCQYTA1HM222J R 2200p 50V Mylar AA
C206 VCEA0A1HW106M R 10 50V Electrolytic AB C624 VCQYTA1HM472J R 4700p 50V Mylar AB
C207 VCKYCY1HF103Z R 0.01 50V Ceramic AA C625 VCEA0A1HW105M R 1.0 50V Electrolytic AB
C208 VCKYCY1HF103Z R 0.01 50V Ceramic AA C626 VCKYCY1HF223Z R 0.022 50V Ceramic AB
C209 VCKYCY1HF103Z R 0.01 50V Ceramic AA C627 VCEA0A1HW106M R 10 50V Electrolytic AB
C210 VCKYCY1HF103Z R 0.01 50V Ceramic AA C628 VCEA0A1HW474M R 0.47 50V Electrolytic AB
C211 VCKYCY1EF104Z R 0.1 25V Ceramic AA C650 VCKYCY1EF104Z R 0.1 25V Ceramic AA
C212 VCEA0A1CW106M R 10 16V Electrolytic AB C654 VCEA0A1CW476M R 47 16V Electrolytic AB
C213 VCKYCY1HF223Z R 0.022 50V Ceramic AB C700 VCQYTA1HM103J R 0.01 50V Mylar AA
C215 VCEA0A1CW476M R 47 16V Electrolytic AB å C701 RC-FZ033SCEZZ R 0.1 AC250V Film AF
C216 VCKYCY1HB821K R 820p 50V Ceramic AA C702 RC-KZ0160GEZZ R 0.01 250V Ceramic AC
C217 VCKYCY1HB472K R 4700p 50V Ceramic AA C703 RC-KZ0160GEZZ R 0.01 250V Ceramic AC
C301 VCEA0A1CW107M R 100 16V Electrolytic AC C704 VCKYPA2HB102K R 1000p 500V Ceramic AA
C302 VCEA0A1HW225M R 2.2 50V Electrolytic AB C705 VCKYPA2HB102K R 1000p 500V Ceramic AA

35
CX34K3

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code

C707 RC-EZ1044CEZZ R 150 400V Electrolytic AM RJ30 VRN-MD2AL000J R 0 1/10W Metal Film AA
C708 RC-KZ0160GEZZ R 0.01 250V Ceramic AC RJ31 VRN-MD2AL000J R 0 1/10W Metal Film AA
C709 RC-QZA471TAYJ R 470p 50V Mylar AB RJ32 VRN-MD2AL000J R 0 1/10W Metal Film AA
C711 RC-KZ0339CEZZ R 560p 2kV Ceramic AD RJ33 VRN-MD2AL000J R 0 1/10W Metal Film AA
C712 VCQYTA1HM102J R 1000p 50V Mylar AA RJ34 VRN-MD2AL000J R 0 1/10W Metal Film AA
C713 RC-KZ007JCEZZ R 0.01 250V Ceramic AC RJ40 VRN-MD2AL000J R 0 1/10W Metal Film AA
C714 RC-KZ0338CEZZ R 560p 2kV Ceramic AD RJ41 VRN-MD2AL000J R 0 1/10W Metal Film AA
C715 VCKYPA2HB102K R 1000p 500V Ceramic AA RJ51 VRN-MD2AL000J R 0 1/10W Metal Film AA
C717 VCQYTA1HM182J R 1800p 50V Mylar AA RJ53 VRN-MD2AL000J R 0 1/10W Metal Film AA
C718 VCEA0A1EW475M R 4.7 25V Electrolytic AB RJ55 VRN-MD2AL000J R 0 1/10W Metal Film AA
C719 VCEA9M1HW226M R 22 50V Electrolytic AB RJ64 VRN-MD2AL000J R 0 1/10W Metal Film AA
å C721 RC-KZ0156CEZZ R 680p 250V Ceramic AG RJ66 VRN-MD2AL000J R 0 1/10W Metal Film AA
C751 VCEA0A1CW476M R 47 16V Electrolytic AB RJ68 VRN-MD2AL000J R 0 1/10W Metal Film AA
C752 VCEA0A0JW107M R 100 6.3V Electrolytic AB RJ69 VRN-MD2AL000J R 0 1/10W Metal Film AA
C753 VCKYPA2HB102K R 1000p 500V Ceramic AA RJ71 VRN-MD2AL000J R 0 1/10W Metal Film AA
C755 VCEA0A1CW108M R 1000 16V Electrolytic AD RJ74 VRN-MD2AL000J R 0 1/10W Metal Film AA
C756 VCEA0A1CW338M R 3300 16V Electrolytic AE RJ75 VRN-MD2AL000J R 0 1/10W Metal Film AA
C758 VCKYPA1HB221K R 220p 50V Ceramic AA RJ76 VRN-MD2AL000J R 0 1/10W Metal Film AA
å C759 VCKYPA1HB102K R 1000p 50V Ceramic AA RJ78 VRN-MD2AL000J R 0 1/10W Metal Film AA
C760 RC-KZ0339CEZZ R 680p 2kV Ceramic AD RJ79 VRN-MD2AL000J R 0 1/10W Metal Film AA
C761 VCEA4W2CN227M R 220 160V Electrolytic AG RJ80 VRN-MD2AL000J R 0 1/10W Metal Film AA
C762 VCQYTA1HM473J R 0.047 50V Mylar AA RJ84 VRN-MD2AL000J R 0 1/10W Metal Film AA
C801 VCEA0A1HW105M R 1.0 50V Electrolytic AB RJ85 VRN-MD2AL000J R 0 1/10W Metal Film AA
C802 VCEA0A1CW337M R 330 16V Electrolytic AC RJ87 VRN-MD2AL000J R 0 1/10W Metal Film AA
C803 VCEA9M1CW107M R 100 16V Electrolytic AB RJ88 VRN-MD2AL000J R 0 1/10W Metal Film AA
C804 VCKYCY1HB222K R 2200p 50V Ceramic AA RJ89 VRN-MD2AL000J R 0 1/10W Metal Film AA
C805 VCKYCY1HB102K R 1000p 50V Ceramic AA RJ92 VRN-MD2AL000J R 0 1/10W Metal Film AA
C806 VCKYCY1HB102K R 1000p 50V Ceramic AA RJ94 VRN-MD2AL000J R 0 1/10W Metal Film AA
C807 VCKYCY1HB102K R 1000p 50V Ceramic AA RJ95 VRN-MD2AL000J R 0 1/10W Metal Film AA
C808 VCEA0A1CW107M R 100 16V Electrolytic AC RJ96 VRN-MD2AL000J R 0 1/10W Metal Film AA
C809 VCKYCY1HF223Z R 0.022 50V Ceramic AB RJ97 VRN-MD2AL000J R 0 1/10W Metal Film AA
C810 VCKYCY1EF104Z R 0.1 25V Ceramic AA RJ103 VRN-MD2AL000J R 0 1/10W Metal Film AA
C811 VCEA0A1CW107M R 100 16V Electrolytic AC RJ105 VRN-MD2AL000J R 0 1/10W Metal Film AA
C812 VCFYFA1HA224J R 0.22 50V Mylar AB RJ201 VRN-MD2AL000J R 0 1/10W Metal Film AA
C813 VCFYFA1HA224J R 0.22 50V Mylar AB RJ202 VRN-MD2AL000J R 0 1/10W Metal Film AA
C814 VCKYCY1HB471K R 470p 50V Ceramic AA RJ204 VRN-MD2AL000J R 0 1/10W Metal Film AA
C1001 VCEA0A0JW107M R 100 6.3V Electrolytic AB RJ205 VRN-MD2AL000J R 0 1/10W Metal Film AA
C1002 VCKYCY1HB561K R 560p 50V Ceramic AA RJ206 VRN-MD2AL000J R 0 1/10W Metal Film AA
C1003 VCEA0A1CW106M R 10 16V Electrolytic AB R201 VRN-MD2AL101J R 100 1/10W Metal Film AA
C1004 VCKYCY1HF103Z R 0.01 50V Ceramic AA R202 VRN-MD2AL101J R 100 1/10W Metal Film AA
C1005 VCKYCY1HF223Z R 0.022 50V Ceramic AB R203 VRD-RM2HD102J R 1.0k 1/2W Carbon AA
C1006 VCEA0A1CW106M R 10 16V Electrolytic AB R204 VRD-RM2HD102J R 1.0k 1/2W Carbon AA
C1007 VCEA0A1CW106M R 10 16V Electrolytic AB R205 VRD-RA2BE680J R 68 1/8W Carbon AA
C1008 VCCCCY1HH330J R 33p 50V Ceramic AA R206 VRN-MD2AL122J R 1.2k 1/10W Metal Film AA
C1009 VCCCCY1HH330J R 33p 50V Ceramic AA R207 VRN-MD2AL221J R 220 1/10W Metal Film AA
C1010 VCEA0A0JW107M R 100 6.3V Electrolytic AB R208 VRN-MD2AL122J R 1.2k 1/10W Metal Film AA
C1011 VCKYCY1HF223Z R 0.022 50V Ceramic AB R209 VRN-MD2AL392J R 3.9k 1/10W Metal Film AA
C1012 VCKYCY1HF223Z R 0.022 50V Ceramic AB R216 VRN-MD2AL681J R 680 1/10W Metal Film AA
C1013 VCEA0A0JW107M R 100 6.3V Electrolytic AB R217 VRD-RA2BE392J R 3.9k 1/8W Carbon AA
C1014 VCEA0A1CW106M R 10 16V Electrolytic AB R218 VRN-MD2AL102J R 1.0k 1/10W Metal Film AA
C1015 VCFYFA1HA474J R 0.47 50V Mylar AC R219 VRN-MD2AL391J R 390 1/10W Metal Film AA
C1016 VCQYTA1HM104J R 0.1 50V Mylar AA R220 VRN-MD2AL101J R 100 1/10W Metal Film AA
C1017 VCKYCY1HB222K R 2200p 50V Ceramic AA R221 VRN-MD2AL102J R 1.0k 1/10W Metal Film AA
C1018 VCKYCY1HB221K R 220p 50V Ceramic AA R222 VRN-MD2AL681J R 680 1/10W Metal Film AA
C1019 VCEA9M1HW225M R 2.2 50V Electrolytic AB R226 VRN-MD2AL750J R 75 1/10W Metal Film AA
R227 VRD-RM2HD330J R 33 1/2W Carbon AA
RESISTORS R228 VRD-RM2HD330J R 33 1/2W Carbon AA
RJ2 VRN-MD2AL000J R 0 1/10W Metal Film AA R230 VRN-MD2AL101J R 100 1/10W Metal Film AA
RJ5 VRN-MD2AL000J R 0 1/10W Metal Film AA R231 VRN-MD2AL153J R 15k 1/10W Metal Film AA
RJ7 VRN-MD2AL000J R 0 1/10W Metal Film AA R233 VRN-MD2AL181J R 180 1/10W Metal Film AA
RJ8 VRN-MD2AL000J R 0 1/10W Metal Film AA R237 VRN-MD2AL272J R 2.7k 1/10W Metal Film AA
RJ9 VRN-MD2AL000J R 0 1/10W Metal Film AA R238 VRN-MD2AL821J R 820 1/10W Metal Film AA
RJ10 VRN-MD2AL000J R 0 1/10W Metal Film AA R239 VRN-MD2AL221J R 220 1/10W Metal Film AA
RJ11 VRN-MD2AL000J R 0 1/10W Metal Film AA R301 VRN-MD2AL680J R 68 1/10W Metal Film AA
RJ12 VRN-MD2AL000J R 0 1/10W Metal Film AA R302 VRN-MD2AL473J R 47k 1/10W Metal Film AA
RJ13 VRN-MD2AL000J R 0 1/10W Metal Film AA R303 VRN-MD2AL473J R 47k 1/10W Metal Film AA
RJ14 VRN-MD2AL000J R 0 1/10W Metal Film AA R304 VRN-MD2AL392J R 3.9k 1/10W Metal Film AA
RJ15 VRN-MD2AL000J R 0 1/10W Metal Film AA R305 VRN-MD2AL100J R 10 1/10W Metal Film AA
RJ16 VRN-MD2AL000J R 0 1/10W Metal Film AA R307 VRD-RA2BE182J R 1.8k 1/8W Carbon AA
RJ21 VRN-MD2AL000J R 0 1/10W Metal Film AA R308 VRD-RA2BE472J R 4.7k 1/8W Carbon AA
RJ25 VRN-MD2AL000J R 0 1/10W Metal Film AA R320 VRN-MD2AL101J R 100 1/10W Metal Film AA
RJ26 VRN-MD2AL000J R 0 1/10W Metal Film AA R321 VRN-MD2AL561J R 560 1/10W Metal Film AA
RJ27 VRN-MD2AL000J R 0 1/10W Metal Film AA R328 VRN-MD2AL564J R 560k 1/10W Metal Film AA
RJ28 VRN-MD2AL000J R 0 1/10W Metal Film AA R329 VRN-MD2AL332J R 3.3k 1/10W Metal Film AA
RJ29 VRN-MD2AL000J R 0 1/10W Metal Film AA R330 VRN-MD2AL101J R 100 1/10W Metal Film AA

36
 CX34K3

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code

R331 VRN-MD2AL102J R 1.0k 1/10W Metal Film AA R723 VRD-RA2BE684J R 680k 1/8W Carbon AA
R332 VRN-MD2AL561J R 560 1/10W Metal Film AA R724 VRD-RA2BE102J R 1.0k 1/8W Carbon AA
R333 VRN-MD2AL103J R 10k 1/10W Metal Film AA R725 VRD-RA2BE564J R 560k 1/8W Carbon AA
R334 VRN-MD2AL102J R 1.0k 1/10W Metal Film AA å R726 VRC-UA2HG825K R 8.2M 1/2W Solid AA
R341 VRN-MD2AL332J R 3.3k 1/10W Metal Film AA R728 VRN-MD2AL272J R 2.7k 1/10W Metal Film AA
R342 VRN-MD2AL564J R 560k 1/10W Metal Film AA R750 VRD-RM2HD4R7J R 4.7 1/2W Carbon AA
R343 VRN-MD2AL104J R 100k 1/10W Metal Film AA R752 VRD-RA2BE682J R 6.8k 1/8W Carbon AA
R344 VRN-MD2AL101J R 100 1/10W Metal Film AA R753 VRS-VV3LB472J R 4.7k 3W Metal Oxide AB
R357 VRN-MD2AL100J R 10 1/10W Metal Film AA R755 VRD-RA2BE222J R 2.2k 1/8W Carbon AA
R378 VRN-VV3DBR68J R 0.68 2W Metal Film AA R756 VRN-MD2AL152J R 1.5k 1/10W Metal Film AA
R403 VRN-MD2AL101J R 100 1/10W Metal Film AA R757 VRD-RA2BE182J R 1.8k 1/8W Carbon AA
R404 VRD-RA2BE820J R 82 1/8W Carbon AA R758 VRD-RA2BE102J R 1.0k 1/8W Carbon AA
R406 VRN-MD2AL103J R 10k 1/10W Metal Film AA R759 VRN-MD2AL102J R 1.0k 1/10W Metal Film AA
R407 VRN-MD2AL101J R 100 1/10W Metal Film AA R760 VRD-RA2BE471J R 470 1/8W Carbon AA
R411 VRD-RA2BE820J R 82 1/8W Carbon AA R761 VRD-RA2BE221J R 220 1/8W Carbon AA
R412 VRN-MD2AL101J R 100 1/10W Metal Film AA R763 VRN-MD2AL472J R 4.7k 1/10W Metal Film AA
R501 VRN-MD2AL182J R 1.8k 1/10W Metal Film AA R764 VRN-MD2AL272J R 2.7k 1/10W Metal Film AA
R502 VRN-MD2AL182J R 1.8k 1/10W Metal Film AA R801 VRN-MD2AL101J R 100 1/10W Metal Film AA
R504 VRD-RM2HD150J R 15 1/2W Carbon AA R802 VRN-MD2AL101J R 100 1/10W Metal Film AA
R505 VRD-RM2HD330J R 33 1/2W Carbon AA R803 VRN-MD2AL101J R 100 1/10W Metal Film AA
R506 VRD-RA2BE124J R 120k 1/8W Carbon AA R804 VRN-MD2AL101J R 100 1/10W Metal Film AA
R508 VRD-RM2HD221J R 220 1/2W Carbon AA R805 VRN-MD2AL822J R 8.2k 1/10W Metal Film AA
R509 VRD-RM2HD1R0J R 1.0 1/2W Carbon AA R806 VRD-RA2BE123J R 12k 1/8W Carbon AA
R510 VRN-MD2AL101J R 100 1/10W Metal Film AA R807 VRN-MD2AL103J R 10k 1/10W Metal Film AA
R511 VRN-MD2AL101J R 100 1/10W Metal Film AA R808 VRN-MD2AL221J R 220 1/10W Metal Film AA
R513 VRD-RA2BE393J R 39k 1/8W Carbon AA R809 VRD-RA2BE224J R 220k 1/8W Carbon AA
R514 VRN-MD2AL101J R 100 1/10W Metal Film AA R812 VRN-MD2AL101J R 100 1/10W Metal Film AA
R515 VRN-MD2AL272J R 2.7k 1/10W Metal Film AA R813 VRN-MD2AL221J R 220 1/10W Metal Film AA
R602 VRN-VV3AB1R5J R 1.5 1W Metal Film AA R1001 VRD-RA2BE221J R 220 1/8W Carbon AA
R603 VRD-RM2HD102J R 1.0k 1/2W Carbon AA R1002 VRN-MD2AL331J R 330 1/10W Metal Film AA
R604 VRD-RA2BE393J R 39k 1/8W Carbon AA R1003 VRN-MD2AL471J R 470 1/10W Metal Film AA
R605 VRD-RM2HD101J R 100 1/2W Carbon AA R1004 VRN-MD2AL821J R 820 1/10W Metal Film AA
R607 VRN-MD2AL102J R 1.0k 1/10W Metal Film AA R1005 VRD-RA2BE181J R 180 1/8W Carbon AA
R608 VRN-MD2AL123J R 12k 1/10W Metal Film AA R1011 VRN-MD2AL820J R 82 1/10W Metal Film AA
R609 VRD-RA2BE273G R 27k 1/8W Carbon AA R1012 VRN-MD2AL391J R 390 1/10W Metal Film AA
R610 VRD-RA2BE153J R 15k 1/8W Carbon AA R1013 VRN-MD2AL101J R 100 1/10W Metal Film AA
R611 VRD-RA2EE823G R 82k 1/4W Carbon AA R1014 VRD-RA2BE101J R 100 1/8W Carbon AB
R612 VRD-RA2BE103J R 10k 1/8W Carbon AA R1015 VRN-MD2AL332J R 3.3k 1/10W Metal Film AA
R613 VRD-RA2BE103J R 10k 1/8W Carbon AA R1016 VRD-RA2BE101J R 100 1/8W Carbon AB
R614 VRN-MD2AL103J R 10k 1/10W Metal Film AA R1017 VRN-MD2AL332J R 3.3k 1/10W Metal Film AA
R615 VRS-KT3LB332J R 3.3k 3W Metal Oxide AC R1019 VRN-MD2AL472J R 4.7k 1/10W Metal Film AA
R616 VRN-MD2AL102J R 1.0k 1/10W Metal Film AA R1020 VRD-RA2BE101J R 100 1/8W Carbon AB
R617 VRD-RM2HD472J R 4.7k 1/2W Carbon AA R1021 VRN-MD2AL153J R 15k 1/10W Metal Film AA
R618 VRS-KA3HG4R7K R 4.7 5W Metal Oxide AD R1022 VRD-RA2BE101J R 100 1/8W Carbon AB
R619 VRD-RM2HD682J R 6.8k 1/2W Carbon AA R1023 VRN-MD2AL101J R 100 1/10W Metal Film AA
R625 VRN-MD2AL184J R 180k 1/10W Metal Film AA R1024 VRN-MD2AL122J R 1.2k 1/10W Metal Film AA
R626 VRN-MD2AL472J R 4.7k 1/10W Metal Film AA R1025 VRN-MD2AL101J R 100 1/10W Metal Film AA
R627 VRD-RM2HD4R7J R 4.7 1/2W Carbon AA R1026 VRN-MD2AL224J R 220k 1/10W Metal Film AA
R628 VRD-RM2HD470J R 47 1/2W Carbon AA R1027 VRD-RA2BE101J R 100 1/8W Carbon AB
R630 VRN-MD2AL100J R 10 1/10W Metal Film AA R1028 VRD-RA2BE101J R 100 1/8W Carbon AB
R631 VRN-MD2AL391J R 390 1/10W Metal Film AA R1030 VRN-MD2AL102J R 1.0k 1/10W Metal Film AA
R632 VRN-MD2AL273J R 27k 1/10W Metal Film AA R1031 VRD-RA2BE562J R 5.6k 1/8W Carbon AA
R633 VRN-MD2AL102J R 1.0k 1/10W Metal Film AA R1032 VRN-MD2AL332J R 3.3k 1/10W Metal Film AA
R635 VRN-MD2AL822J R 8.2k 1/10W Metal Film AA R1033 VRD-RA2BE102J R 1.0k 1/8W Carbon AA
R636 VRN-MD2AL223J R 22k 1/10W Metal Film AA R1034 VRD-RA2BE101J R 100 1/8W Carbon AB
R637 VRD-RM2HD391J R 390 1/2W Carbon AA R1035 VRN-MD2AL332J R 3.3k 1/10W Metal Film AA
R638 VRN-MD2AL333J R 33k 1/10W Metal Film AA R1036 VRN-MD2AL332J R 3.3k 1/10W Metal Film AA
R701 VRW-KQ3NC3R9K R 3.9 7W Cement AE R1037 VRD-RA2BE101J R 100 1/8W Carbon AB
å R704 VRG-PD2HD150J R 15 1/2W Fuse Resistor AC R1038 VRD-RA2BE101J R 100 1/8W Carbon AB
R705 VRD-RA2BE122J R 1.2k 1/8W Carbon AA R1039 VRN-MD2AL223J R 22k 1/10W Metal Film AA
R706 VRD-RM2HD152J R 1.5k 1/2W Carbon AA R1040 VRN-MD2AL101J R 100 1/10W Metal Film AA
R707 VRS-KT3LB473J R 47k 3W Metal Oxide AE R1041 VRN-MD2AL101J R 100 1/10W Metal Film AA
R708 VRD-RM2HD272J R 2.7k 1/2W Carbon AA R1043 VRN-MD2AL153J R 15k 1/10W Metal Film AA
R709 VRD-RA2BE681J R 680 1/8W Carbon AA R1044 VRN-MD2AL153J R 15k 1/10W Metal Film AA
R710 VRN-VV3ABR39J R 0.39 1W Metal Film AA R1045 VRD-RA2BE271J R 270 1/8W Carbon AA
R711 VRN-VV3ABR33J R 0.33 1W Metal Film AA R1046 VRD-RA2BE101J R 100 1/8W Carbon AB
å R712 VRG-PD2HD4R7J R 4.7 1/2W Fuse Resistor AC R1065 VRN-MD2AL101J R 100 1/10W Metal Film AA
R713 VRN-MD2AL103J R 10k 1/10W Metal Film AA
R714 VRN-MD2AL102J R 1.0k 1/10W Metal Film AA SWITCHES
R715 VRD-RA2BE331J R 330 1/8W Carbon AA å S701 QSW-P0591CEZZ R Power AQ
R717 VRD-RM2HD124J R 120k 1/2W Carbon AA or
R718 VRD-RM2HD124J R 120k 1/2W Carbon AA QSW-K0079GEZZ
å R719 VRC-UA2HG825K R 8.2M 1/2W Solid AA S1001 QSW-K0077GEZZ R CH-Up AB
R721 VRD-RA2BE393J R 39k 1/8W Carbon AA or
R722 VRD-RM2HD124J R 120k 1/2W Carbon AA QSW-K0079GEZZ

37
CX34K3

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code

S1002 QSW-K0077GEZZ R CH-Down AB D888 VHD1SS82///1A R Diode AC

or D890 RH-DX0627GEZZ R Zender Diode
QSW-K0079GEZZ
S1003 QSW-K0077GEZZ R VOL-Up AB CAPACITORS
or C871 VCKYPA1HB471K R 470p 50V Ceramic AA
QSW-K0079GEZZ C872 VCKYPA1HB471K R 470p 50V Ceramic AA
S1004 QSW-K0077GEZZ R VOL-Down AB C873 VCKYPA1HB471K R 470p 50V Ceramic AA
or C875 VCKYPA2HB102K R 1000p 500V Ceramic AA
QSW-K0079GEZZ C876 RC-KZ0150CEZZ R 1000p 3kV Ceramic AB
S1005 QSW-K0077GEZZ R Picture/Preset AB C878 VCEAGA2EW106M R 10 250V Electrolytic AC
or C880 VCKYPA1HB471K R 470p 50V Ceramic AA
QSW-K0079GEZZ C881 VCKYPA1HB471K R 470p 50V Ceramic AA
C882 VCKYPA1HB471K R 470p 50V Ceramic AA
MISCELLANEOUS PARTS
å F701 QFS-C3229CEZZ R Fuse T3.15A 250V AD RESISTORS
FB306 RBLN-0037CEZZ R Ferrite Bead AB R879 VRD-RA2BE471J R 470 1/8W Carbon AA
FB501 RBLN-0037CEZZ R Ferrite Bead AB R880 VRD-RA2BE471J R 470 1/8W Carbon AA
FB502 RBLN-0037CEZZ R Ferrite Bead AB R881 VRD-RA2BE471J R 470 1/8W Carbon AA
FB602 RBLN-0037CEZZ R Ferrite Bead AB R882 VRS-VV3DB153J R 15k 2W Metal Oxide AA
FB701 RBLN-0037CEZZ R Ferrite Bead AB R883 VRD-RM2HD272J R 2.7k 1/2W Carbon AA
FB702 RBLN-0037CEZZ R Ferrite Bead AB R884 VRS-VV3DB153J R 15k 2W Metal Oxide AA
FB751 RBLN-0037CEZZ R Ferrite Bead AB R885 VRD-RM2HD272J R 2.7k 1/2W Carbon AA
FB752 RBLN-0037CEZZ R Ferrite Bead AB R886 VRS-VV3DB153J R 15k 2W Metal Oxide AA
FH701 QFSHD1014CEZZ R Fuse Holder AC R887 VRD-RM2HD272J R 2.7k 1/2W Carbon AA
FH702 QFSHD1013CEZZ R Fuse Holder AC R888 VRD-RA2BE471J R 470 1/8W Carbon AA
J402 QJAKE0158CEZZ R Rear Jack, Video AF R892 VRD-RA2BE102J R 1.0k 1/8W Carbon AA
J403 QJAKE0159CEZZ R Rear Jack, Audio (L) AF R893 VRD-RA2BE102J R 1.0k 1/8W Carbon AA
J405 QJAKH0011AJZZ R Front AV Jack AK R894 VRD-RA2BE102J R 1.0k 1/8W Carbon AA
P302 QPLGN0241CEZZ R Plug, 2-pin (S) AA R898 VRD-RA2BE471J R 470 1/8W Carbon AA
P303 QPLGN0741CEZZ R Plug, 7-pin (HP) AB R899 VRD-RA2BE471J R 470 1/8W Carbon AA
P502 QPLGN0660CEZZ R Plug, 6-pin (F) AC
P602 QPLGN0641CEZZ R Plug, 6-pin (H) AB MISCELLANEOUS PARTS
P701 QPLGN0260CEZZ R Plug, 2-pin (G) AC P851 QPLGN0641CEZZ R Plug, 6-pin (H) AB
P712 QPLGN0269GEZZ R Plug, 2-pin (A) AB P882 QPLGN0541CEZZ R Plug, 5-pin (K) AB
P1001 QPLGN0541CEZZ R Plug, 5-pin (K) AB å SC881 QSOCV0842CEZZ R CRT Socket AH
P1002 QPLGN0541CEZZ R Plug, 5-pin (BC) AB
RMC1001 RRMCU0235CEZZ R R/C Receiver AK
JA160 VRD-RA2BE101J R 100 1/8W Carbon AB
TP201 QLUGP0102PEZZ J Lug, Test Point AA PWB-C DUNTK9989WEV0
RDA300 PRDAR0142PEFW J Heat Sink, for IC301 AD HEADPHONE UNIT
RDA601 PRDAR0224PEFW J Heat Sink, for Q602 AF
RDA700 PRDAR0260PEFW J Heat Sink, for IC701 AH RESISTORS
RDA501 PRDAR0298PEFW J Heat Sink, for IC501 AF RJ1 VRN-MD2AL000J R 0 1/10W Metal Film AA
LHLDP1066PE00 J Holder AC RJ7 VRN-MD2AL000J R 0 1/10W Metal Film AA
LX-BZ0007PEFD J Screw AA RJ8 VRN-MD2AL000J R 0 1/10W Metal Film AA
LX-BZ0086TAFD R Screw AA R354 VRN-MD2AL471J R 470 1/10W Metal Film AA
LX-BZ3049GEFD R Screw AA R355 VRN-MD2AL471J R 470 1/10W Metal Film AA
LX-BZ3100CEFD R Screw AA
LX-TZ3004CEFD R Screw AA MISCELLANEOUS PARTS
J351 QJAKJ0047CEZZ R Headphone Jack AD
P352 QPLGN0441CEZZ R Plug, 4-pin AB
PWB-B DUNTK9990WEV0
CRT UNIT
TRANSISTORS
Q870 VSBF422////-1 R BF422 AC
Q871 VSBF422////-1 R BF422 AC
Q872 VSBF422////-1 R BF422 AC
Q883 VSBF421////-1 R BF421 AC
Q885 VSBF421////-1 R BF421 AC
Q887 VSBF421////-1 R BF421 AC

DIODES
D811 RH-DX0475CEZZ R Diode AB
D812 RH-DX0475CEZZ R Diode AB
D880 RH-DX0475CEZZ R Diode AB
D881 RH-DX0475CEZZ R Diode AB
D882 RH-DX0475CEZZ R Diode AB
D883 VHD1SS82///1A R Diode AC
D884 VHD1SS82///1A R Diode AC
D885 VHD1SS82///1A R Diode AC
D886 VHD1SS82///1A R Diode AC
D887 VHD1SS82///1A R Diode AC

38
 CX34K3

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code

MISCELLANEOUS PARTS CABINET PARTS

å ACC701 QACCL3025CESA R AC Cord AR 1 CCABA2555WEV0 J Front Cabinet Ass’y BB
SP301 VSP9050PB25WA R Speaker, 16 ohm AM 1-1 Not Available – Front Cabinet —
LHLDF0044PEZZ J Holder AC 1-2 GCOVA0105PESA J Cover, LED, R/C Receiver AC
LHLDW1033PEZZ J Holder AA 1-3 HBDGB0018PESB J Badge, “SHARP” AD
LHLDW1033PEZZ J Holder AA 1-4 JBTN-0313PESA J Button, Control AC
LHLDW1060PEZZ J Holder AA 1-5 JBTN-0314PESA J Button, Power AD
QCNW-2377PEZZ J Connecting Cord AE 1-6 MSPRC0068CEFW R Spring, Power Button AA
QCNW-2378PEZZ J Connecting Cord AE
QCNW-2379PEZZ J Connecting Cord AE 2 GCABB2411PEKA J Rear Cabinet Ass’y AW
QCNW-2423PEZZ J Connecting Cord AE
TLABK0002PEZZ J Label AB
TLABM1652PEZZ J Label AB
TLABN0001PEZZ J Label AD
TLABV0268PEZZ J Label AB CABINET PARTS LOCATION

SUPPLIED ACCESSORIES
2
1
QANTR0018PEZZ J Rod Antenna AQ
RRMCG1342PESA J Infrared R/C Unit AU
QPLGJ0113CEZZ R Plug AG
TCAUA0002PEZZ J Caution Card AB
TiNS-6830PEZZ J Operation Manual AE

SUPPLIED ACCESSORIES (NOT REPLACEMENT ITEM)

TGAN-0068PEZZ – Guarantee Card —

1-3

PACKING PARTS
(NOT REPLACEMENT ITEM)
SPAKC6626PEZZ – Packing Case —
SPAKP0056PEZZ – Wrapping Paper — 1-5 1-6 1-2 1-4
SPAKX2713PEZZ – Buffer Material —
SSAKA0031PEZZ – Polyethylene Bag —
SSAKH0009PEZZ – Polyethylene Bag —

39
CX34K3

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code

COPYRIGHT © 2000 BY SHARP CORPORATION

ALL RIGHTS RESERVED.

No part of this publication may be reproduced,

stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without
prior written permission of the publisher.

SHARP CORPORATION
TQ0829-S AV Systems Group
Feb. 2000 Printed in Japan Quality & Reliability Control Center
NA. KG Yaita, Tochigi 329-2193, Japan
40