REISSUED Certificate No : PTD-IOPPA-0025-21
INTERNATIONAL OIL POLLUTION
PREVENTION CERTIFICATE
REPUBLIC OF THE MARSHALL ISLANDS
This certificate shall be supplemented by a Record of Construction and Equipment.
Issued under the provisions of the International Convention for the Prevention of Pollution from Ships, 1973, as
modified by the Protocol of 1978 relating thereto, as amended (hereinafter referred to as "the Convention") under
the authority of the Government of REPUBLIC OF THE MARSHALL ISLANDS by Korean Register.
Particulars of ship
Name of Ship GLOVIS SUNRISE
Distinctive Number or Letters 5503
Port of Registry MAJURO
Gross Tonnage 64,546.00
1
Deadweight (metric tons) -
IMO Number 9702405
Type of Ship
- Oil tanker
- Ship other than an oil tanker with cargo tanks coming under regulation 2.2 of Annex I of the Convention
X Ship other than any of the above
This is to Certify
1. That the ship has been surveyed in accordance with regulation 6 of Annex I of the Convention; and
2. That the survey shows that the structure, equipment, systems, fittings, arrangement and material of
the ship and the condition thereof are in all respects satisfactory and that the ship complies with
the applicable requirements of Annex I of the Convention.
1
For oil tankers.
This certificate is issued in an electronic format in accordance with IMO FAL.5/Circ.39/Rev.2.
Validation and authentication of the certificate can be confirmed from "http://e-cert.krs.co.kr"
by using the tracking No(CN21006458433) and certificate No.(PTD-IOPPA-0025-21).
IOPP A 1/10 (2021.01)
Certificate No : PTD-IOPPA-0025-21
This certificate is valid until 03 April 2024 subject to surveys in accordance with Regulation 6 of Annex l of the
Convention
Completion date of the survey on which this certificate is based: 11 February 2019
Issued at Pyeongtaek-Dangjin on 29 March 2021
KOREAN REGISTER
Surveyor ( CHOI Yosang )
IOPP A 2/10 (2021.01)
Certificate No : PTD-IOPPA-0025-21
Endorsement for annual and intermediate surveys
THIS IS TO CERTIFY that, at a survey required by regulation 6 of Annex I of the Convention,
the ship was found to comply with the relevant provisions of the Convention :
Annual Survey Signed
LEE Yeongkeun
Place GWANGYANG , KOREA
Date 03 April 2020
Annual1 / Intermediate1 Survey Signed
CHOI Yosang
Place PYEONGTAEK , KOREA
Date 29 March 2021
Annual1 / Intermediate1 Survey Signed
Place
Date
Annual Survey Signed
Place
Date
1
Delete as appropriate.
IOPP A 3/10 (2021.01)
Certificate No : PTD-IOPPA-0025-21
Annual / Intermediate survey in accordance with regulation 10.8.3
1 1
THIS IS TO CERTIFY that, at an Annual / Intermediate survey in accordance with regulation 10.8.3 of
Annex I of the Convention, the ship was found to comply with the relevant provisions of the Convention.
Signed
Place
Date
Endorsement to extend the certificate if valid for less than 5 years where regulation 10.3 applies
The ship complies with the relevant provisions of the Convention, and this certificate shall, in accordance with
regulation 10.3 of Annex I of the Convention, be accepted as valid until
Signed
Place
Date
Endorsement where the renewal survey has been completed and regulation 10.4 applies
The ship complies with the relevant provisions of the Convention, and this certificate shall, in accordance with
regulation 10.4 of Annex I of the Convention, be accepted as valid until
Signed
Place
Date
1
Delete as appropriate.
IOPP A 4/10 (2021.01)
Certificate No : PTD-IOPPA-0025-21
Endorsement to extend the validity of the certificate until reaching the port of survey or for a period of grace
where regulation 10.5 or 10.6 applies
1 1
The certificate shall, in accordance with 10.5 / 10.6 of Annex I of the Convention, be accepted as
valid until
Signed
Place
Date
Endorsement for advancement of anniversary date where regulation 10.8 applies
In accordance with regulation 10.8 of Annex I of the Convention, the new anniversary date is
Signed
Place
Date
In accordance with regulation 10.8 of Annex I of the Convention, the new anniversary date is
Signed
Place
Date
1
Delete as appropriate.
IOPP A 5/10 (2021.01)
Certificate No : PTD-IOPPA-0025-21
Form A
SUPPLEMENT TO THE INTERNATIONAL OIL POLLUTION PREVENTION
CERTIFICATE (IOPP CERTIFICATE)
RECORD OF CONSTRUCTION AND EQUIPMENT FOR SHIPS
OTHER THAN OIL TANKERS
In respect of the provisions of Annex I of the International Convention for the Prevention of Pollution from Ships,
1973, as modified by the Protocol of 1978 relating thereto (hereinafter referred to as "the Convention").
1. Particulars of ship
1.1 Name of ship : GLOVIS SUNRISE
1.2 Distinctive number or letters : 5503
1.3 Port of registry : MAJURO
1.4 Gross tonnage : 64,546
1.5 Date of build :
1.5.1 Date of building contract 23 May 2013
1.5.2 Date on which keel was laid or ship was at a similar
stage of construction 04 November 2013
1.5.3 Date of delivery 04 April 2014
1.6 Major conversion(if applicable) :
1.6.1 Date of conversion contract -
1.6.2 Date on which conversion was commenced -
1.6.3 Date of completion of conversion -
1.7 The ship has been accepted by the Administration as a "ship delivered on or before 31 December 1979"
under regulation 1.28.1 due to unforeseen delay in delivery .................................................................. -
2. Equipment for the control of oil discharge from machinery space bilges and oil fuel tanks
(regulations 16 and 14)
2.1 Carriage of ballast water in oil fuel tanks :
2.1.1 The ship may under normal conditions carry ballast water in oil fuel tanks .......................................... -
2.2 Type of oil filtering equipment fitted :
2.2.1 Oil filtering (15 ppm) equipment (regulation 14.6) ............................................................................ -
IOPP A 6/10 (2021.01)
Certificate No : PTD-IOPPA-0025-21
2.2.2 Oil filtering (15 ppm) equipment with alarm and automatic stopping device (Regulation 14.7) ............ X
In Addition to the equipment, the ship is fitted with preprocessing unit
2.3 Approval standards:
2.3.1 The separating/filtering equipment :
.1 has been approved in accordance with resolution A.393(X) ......................................................... -
.2 has been approved in accordance with resolution MEPC.60(33) ................................................. -
.3 has been approved in accordance with resolution MEPC.107(49) ............................................... X
.4 has been approved in accordance with resolution A.233(VII) ........................................................ -
.5 has been approved in accordance with national standards not based upon resolution A.393(X)
or A.233(VII) .............................................................................................................................. -
.6 has not been approved. ................................................................................................................. -
2.3.2 The process unit has been approved in accordance with resolution A.444(XI) ................................... -
2.3.3 The oil content meter :
.1 has been approved in accordance with resolution A.393(X) ....................................................... -
.2 has been approved in accordance with resolution MEPC.60(33) ................................................. -
.3 has been approved in accordance with resolution MEPC.107(49) ............................................... X
3
2.4 Maximum throughput of the system is 5.00 m /h
GRS-50EB, GEORIM ENGINEERING CO., LTD
2.5 Waiver of regulation 14:
2.5.1 The requirements of regulation 14.1 or 14.2 are waived in respect of the ship in accordance with
regulation 14.5.
2.5.1.1 The ship is engaged exclusively on voyages within special area(s): ............................................. -
2.5.1.2 The ship is certified under the International Code of Safety for High-Speed Craft and engaged
on a scheduled service with a turn-around time not exceeding 24 hours .......................................... -
IOPP A 7/10 (2021.01)
Certificate No : PTD-IOPPA-0025-21
2.5.2 The ship is fitted with holding tank(s) for the total retention on board of all oily bilge water as
follows: ........................................................................................................................................ -
Tank Location
Tank Volume
3
Identification Frames (m )
Lateral Position
from ～ to
Total Volume
3
m
2A.1 The ship is required to be constructed according to regulation 12A and complies with the
requirements of :
Paragraphs 6 and either 7 or 8 (double hull construction) ......................................................... X
Paragraphs 11 (accidental oil fuel outflow performance) .................................................................. -
2A.2 The ship is not required to comply with the requirements of regulation 12A ................................... -
1
3. Means for retention and disposal of oil residues (sludge) (regulation 12) and oily bilge water holding tank(s)
3.1 The ship is provided with oil residue(sludge) tanks for retention of oil residues(sludge) on board as follows:
Tank Location
Tank Volume
3
Identification Frames (m )
Lateral Position
from ～ to
OILY BILGE TANK No. 28-40 Port(D/B) 19.10
L.O SLUDGE TANK No. 14-17 St'bd(E/R 2nd deck) 9.60
F.O SLUDGE TANK No. 12-17 Port(E/R 2nd deck) 21.20
WASTE OIL SETT. TANK No. 20-23 Port(A deck) 2.81
WASTE OIL SERVICE TANK No. 20-22 Port(A deck) 2.50
M/E SCAV. AIR BOX DRAIN TANK No. 30-32 Port(Floor deck) 0.76
Total Volume
3
55.97 m
3.2 Means for the disposal of oil residues(sludge) retained in oil residue(sludge) tanks :
3.2.1 Incinerator for oil residues(sludge) ................................................................................................ X
3.2.2 Auxiliary boiler suitable for burning oil residues(sludge) ...................................... -
1
Oily bilge water holding tank(s) are not required by the Convention, if such tank(s) are provided they shall be listed in Table 3.3.
IOPP A 8/10 (2021.01)
Certificate No : PTD-IOPPA-0025-21
3.2.3 Other acceptable means, state which; .............................................................................................. -
3.3 The ship is provided with holding tank(s) for the retention on board of oily bilge water as follows:
Tank Location
Tank Volume
3
Identification Frames (m )
Lateral Position
from ～ to
BILGE HOLDING TANK No. 12-28 Center(D/B) 90.40
Total Volume
90.40 m3
4. Standard discharge connection (Regulation 13)
4.1 The ship is provided with a pipeline for the discharge of residues from machinery bilges and sludges to
reception facilities, fitted with a standard discharge connection in accordance with Regulation 13 .... X
5. Shipboard oil/marine pollution emergency plan (regulation 37)
5.1 The ship is provided with a shipboard oil pollution emergency plan in compliance with
regulation 37 .................................................................................................................................. X
5.2 The ship is provided with a shipboard marine pollution emergency plan in compliance with
regulation 37.3 .................................................................................................................................. -
6. Exemption
6.1 Exemptions have been granted by the Administration from the requirements of
chapter 3 of Annex I of the Convention in accordance with regulation 3.1 on those
items listed under paragraph(s) of this Record ......................... -
IOPP A 9/10 (2021.01)
Certificate No : PTD-IOPPA-0025-21
7. Equivalents (regulation 5)
7.1 Equivalents have been approved by the Administration for certain requirements of
Annex I on those items listed under paragraph(s) of this Record ...... -
8. Compliance with part II-A – chapter 1 of the Polar Code
8.1 The ship is in compliance with additional requirements in the environment-related provisions of the
Introduction and section 1.2 of chapter 1 of part II-A of the Polar Code .......................................... -
This is to certify that this Record is correct in all respects.
Issued at Pyeongtaek-Dangjin on 29 March 2021
KOREAN REGISTER
Surveyor ( CHOI Yosang )
IOPP A 10/10 (2021.01)
