630 A

1200 A
TPS

Technologies for
confined Spaces

NH Fuse-Switch, 1-pole,
for UPS systems EFEN NH Battery-Fuse-Link TPS disconnector for 80 V DC TPS Fault Terminator Fuse-Link
 MM: Bild angeben

Content
Products for DC Application
up to 550 V and 750 V 386

Products for DC Application

up to 80 V - series TPS 388

Technical data see page 390

Products for DC Application up to 80 V Products for DC Application up to 550 V

Particularly constructed for power distributions up The 1-pole Load-Break-Switches are specifically
to 80 V the EFEN-TPS Fuse-Switches offer clear designed for an operating voltage of 550 V DC.
advantages, for example to protect DC distributions These are used to protect batteries and battery-
in telecommunication power supplies. supplied circuits.
Their special DC Fuse-Links have a very high energy A wide range of accessories are available.
density which results in a compact design. This saves
space and cost when installing power distribution
systems.

NH Fuse-Base with microswitch

Supply bus modul up to 750 V DC
DC
IN THE LINE OF POWER
Products for DC Application up to 550 V

For more information

see page 390

NH Battery-Fuse-Link 550 V DC
- Clear identification to the protection against mix-up

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

NH-BATTERIESICHERUNG 00 E 00 35177-0010 3 netto 0,010 0,004 28,60

NH-BATTERIESICHERUNG 00 G 00 35177-0030 3 netto 0,010 0,004 28,60
NH-BATTERIESICHERUNG 00 H 00 35177-0040 3 netto 0,010 0,004 28,60
NH-BATTERIESICHERUNG 00 A 00 35177-0050 3 netto 0,010 0,004 26,40
NH-BATTERIESICHERUNG 00 B 00 35177-0060 3 netto 0,010 0,004 26,40
35178-0020 NH-BATTERIESICHERUNG 00 C 00 35177-0070 3 netto 0,018 0,004 26,40
NH-BATTERIESICHERUNG 00 D 00 35177-0080 3 netto 0,013 0,004 28,65
NH-BATTERIESICHERUNG 1 A 2C 35178-0010 3 netto 0,019 0,010 57,30
NH-BATTERIESICHERUNG 1 B 2C 35178-0020 3 netto 0,025 0,010 57,30
NH-BATTERIESICHERUNG 1 C 2C 35178-0030 3 netto 0,047 0,010 57,30
NH-BATTERIESICHERUNG 2 A 2 35179-0010 3 netto 0,038 0,019 72,70
NH-BATTERIESICHERUNG 2 B 2 35179-0020 3 netto 0,055 0,019 88,00
NH-BATTERIESICHERUNG 3 A 3 35180-0010 1 netto 0,074 0,026 115,00
NH-BATTERIESICHERUNG 3 B 3 35180-0020 1 netto 0,085 0,026 123,00
NH-BATTERIESICHERUNG 3 C 3 35180-0030 1 netto 0,107 0,026 130,00
NH-BATTERIESICHERUNG 4 C 4a 35183-0020 1 netto 0,020 0,080 236,00
NH-BATTERIESICHERUNG 4 D 4a 35183-0030 1 netto 0,020 0,080 242,00
NH-BATTERIESICHERUNG 4 E 4a 35183-0040 1 netto 0,020 0,080 248,00

NH Fuse-Switch, 1-pole switching for baseplate mounting

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Flat terminal M8 00 160 33107-0010 2 NT 6 0,003 0,005 65,25

Multiple use terminal U3 with 00 125 33108-0010 2 NT 6 0,003 0,005 66,30
pressure plates 2,5 - 25 mm²
Multiple use terminal U4 with 00 160 33109-0010 2 NT 6 0,003 0,005 69,70
pressure plates and prism 25 - 70 mm²
Flat terminal M10 1 250 33095-0010 2 NT 6 0,016 0,077 163,60
Flat terminal M10 2 400 33096-0010 2 NT 6 0,016 0,077 163,60
33107-0010 Flat terminal M12 3 630 33097-0010 2 NT 6 0,016 0,097 171,20
Flat terminal M16 4a 1600 33047-0010 1 NT 6 0,036 0,189 323,00

NH Fuse-Switch, 1-pole switching for busbar mounting

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Flat terminal M 8, variable 00 160 33111-0010 2 NT 6 0,004 0,005 65,25

selection of cabel terminal
on either top or bottom
Multiple use terminal U3 with 00 125 33112-0010 2 NT 6 0,004 0,005 66,30
pressure plates 2,5 - 25 mm²,
variable selection of cabel
terminal on either top or bottomn
33100-0010 Multiple use terminal U4 with 00 160 33113-0010 2 NT 6 0,004 0,005 69,70
pressure plates and prism 25 - 70
mm², variable selection of cabel
terminal on either top or bottom
Flat terminal M10, terminal bottom 1 250 33098-0010 2 NT 6 0,016 0,077 166,90
Flat terminal M10, terminal top 1 250 33098-0020 2 NT 6 0,016 0,077 166,90
Flat terminal M10, terminal bottom 2 400 33099-0010 2 NT 6 0,016 0,077 166,90
Flat terminal M10, terminal top 2 400 33099-0020 2 NT 6 0,016 0,077 166,90
Flat terminal M12, terminal bottom 3 630 33100-0010 2 NT 6 0,016 0,097 178,80
Flat terminal M12, terminal top 3 630 33100-0020 2 NT 6 0,016 0,097 175,80
Flat terminal M16, terminal bottom 4a 1250 33048-0010 1 NT 6 0,036 0,205 327,00
Flat terminal M16, terminal top 4a 1250 33048-0020 1 NT 6 0,036 0,205 327,00
Flat terminal M16, terminal bottom 4a 1600 33048-0030 1 NT 6 0,036 0,205 384,00
Flat terminal M16, terminal top 4a 1600 33048-0040 1 NT 6 0,036 0,205 384,00

386 Technical adaptations possible • Recommended retail price plus VAT • Date: 01.02.2011
IN THE LINE OF POWER
Products for DC Application up to 550 V and 750 V

For more information

see page 390

Accessories for NH-Fuse-Switches, 1-pole switching, size 00- 4a

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Striker (Elegard) 36031-0010 12 NZ 2 17,80

Nameplate 45 x 17 mm 00-3 36040-0010 1 NSL 5 2,45

31122-0100
Carrier for identification label 00N 31122-0100 1 NSL 5 1,50
Terminal cover 1-2-3 31157-0100 1 NSL 5 8,90
Twinning set for parallel operation 1-2-3 81251-0100 3 NSL 5 7,80

Lid with fuse-monitoring 1 83359-0100 1 NSL 5 61,90

Verbindungsblende zur gleichzeiti- 00N 31187-0100 1 NSL 5 8,00
gen Betätigung von 2 Einzelgeräten
Lid with fuse-monitoring 2 83360-0100 1 NSL 5 61,90
Lid with fuse-monitoring 3 83361-0100 1 NSL 5 61,90
Micro switch for position indicating 00N 36107-0010 1 NSL 5 5,35

NH Fuse-Bases 1500 V AC / 750 V DC for baseplate mounting

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Inserted screw nut M12, 3L 425 33039-0010 1 NU 1 0,024 0,066 109,40

without micro switch
33039-0010 Inserted screw nut M16, 3L 630 33040-0010 1 NU 1 0,028 0,102 124,90
without micro switch

NH Fuse-Bases 1500 V AC / 750 V DC for baseplate mounting with microswitch

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Inserted screw nut M12, 3L 425 33041-0010 1 NU 1 0,024 0,066 170,00

with micro switch
Inserted screw nut M16, 3L 630 33042-0010 1 NU 1 0,028 0,102 212,00
with micro switch
33041-0010

Accessorie for NH Fuse-Bases size 3L

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Barrier for mounting with screws 3L 30219-0100 1 NU 1 on demand

2 x M4x28 (screws are not included)
DC

Technical adaptations possible • Recommended retail price plus VAT • Date: 01.02.2011 387
IN THE LINE OF POWER
Products for DC Application up to 80 V - series TPS

For more information

see page 390

TPS Fault Terminator Fuse-Links

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

TPS FAULT TERMINATOR 60 A 00 60 35300-0060 3 N 1 0,003 14,35

TPS FAULT TERMINATOR 80 A 00 80 35300-0080 3 N 1 0,003 15,45
TPS FAULT TERMINATOR 100 A 00 100 35300-0100 3 N 1 0,004 19,80
TPS FAULT TERMINATOR 150 A 00 150 35300-0150 3 N 1 0,004 25,40
TPS FAULT TERMINATOR 200 A 00 200 35300-0200 3 N 1 0,005 30,85
TPS FAULT TERMINATOR 250 A 00 250 35300-0250 3 N 1 0,007 35,20
TPS FAULT TERMINATOR 300 A 00 300 35300-0300 3 N 1 0,007 38,50
35300-0600 TPS FAULT TERMINATOR 400 A 00 400 35300-0400 3 N 1 0,013 40,75
TPS FAULT TERMINATOR 500 A 00 500 35300-0500 3 N 1 0,013 45,00
TPS FAULT TERMINATOR 600 A 00 600 35300-0600 3 N 1 0,018 49,50
TPS FAULT TERMINATOR 800 A 2 800 35330-0800 1 N 1 0,044 0,047 119,00
TPS FAULT TERMINATOR 1000 A 2 1000 35330-1000 1 N 1 0,064 0,047 123,00
TPS FAULT TERMINATOR 1200 A 2 1200 35330-1200 1 N 1 0,074 0,047 126,00
TPS FAULT TERMINATOR 1600 A 2 1600 35330-1600 1 N 1 0,084 0,047 142,00

TPS Fault Terminator Fuse-Links with striker

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

TPS FAULT TERMINATOR 60 A SM 00 60 35301-0060 3 N 1 0,003 22,05

TPS FAULT TERMINATOR 80 A SM 00 80 35301-0080 3 N 1 0,003 24,30
TPS FAULT TERMINATOR 100 A SM 00 100 35301-0100 3 N 1 0,004 27,60
TPS FAULT TERMINATOR 150 A SM 00 150 35301-0150 3 N 1 0,004 33,10
TPS FAULT TERMINATOR 200 A SM 00 200 35301-0200 3 N 1 0,005 39,70
TPS FAULT TERMINATOR 250 A SM 00 250 35301-0250 3 N 1 0,007 42,95
TPS FAULT TERMINATOR 300 A SM 00 300 35301-0300 3 N 1 0,007 46,25
35301-0100
TPS FAULT TERMINATOR 400 A SM 00 400 35301-0400 3 N 1 0,013 49,60
TPS FAULT TERMINATOR 500 A SM 00 500 35301-0500 3 N 1 0,013 52,90
TPS FAULT TERMINATOR 600 A SM 00 600 35301-0600 3 N 1 0,018 57,30

TPS Fuse-Switches for baseplate mounting

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Thread M8 00 250 33107-0250 2 NT 6 0,003 0,007 69,40

Flat terminal M12 00 600 33107-0600 2 NT 6 0,012 0,042 84,35
Flat terminal M16 2 1200 33460-0000 1 NT 6 0,012 0,067 309,00
Flat terminal 2 x M12 2 1600 33560-0000 1 NT 6 0,019 0,106 374,00

33107-0250

TPS Fuse-Switches for baseplate mounting with fuse monitoring

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Thread M8 00 250 33107-0252 2 NT 6 0,003 0,007 72,65

Flat terminal M12 00 600 33107-0602 2 NT 6 0,012 0,042 113,15
Flat terminal M16 2 1200 33460-0010 1 NT 6 0,012 0,067 375,00
Flat terminal 2 x M12 2 1600 33560-0010 1 NT 6 0,019 0,106 438,00

33107-0602

TPS Fuse-Switches for busbar mounting

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Thread M8 00 250 33111-0250 2 NT 6 0,003 0,008 69,40

Flat terminal M12 00 600 33111-0600 2 NT 6 0,012 0,042 84,35
Flat terminal M16 2 1200 33470-0000 2 NT 6 0,012 0,070 320,00

33111-0250

388 Technical adaptations possible • Recommended retail price plus VAT • Date: 01.02.2011
IN THE LINE OF POWER
Products for DC Application up to 80 V - series TPS

For more information

see page 390

TPS Fuse-Switches for busbar mounting with Fuse monitoring

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Thread M8 00 250 33111-0252 2 NT 6 0,003 0,008 72,65

Flat terminal M12 00 600 33111-0602 2 NT 6 0,012 0,042 142,35
Flat terminal M16 2 1200 33470-0010 1 NT 6 on demand
Flat terminal 2x M12 2 1600 33570-0010 1 NT 6 on demand

33111-0252

NH Fuse-Base
Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Flat terminal M8, baseplate 00 160 33003-0020 10 NU 1 16,50

mounting, for TPS Fault
Terminator Fuse-Links up to 250 A
Flat terminal M8, for busbar 00 160 33120-0020
mounting, for TPS Fault
Terminator Fuse-Links up to 250 A
Flat terminal M8, for supporting 00 160 33120-0070 10 NU 1 0,002 0,006 12,15
rails, for TPS Fault Terminator
33120-0010 Fuse-Links up to 250 A

Accessories TPS
Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Micro switch for position indicating 00 36107-0010 1 NSL 5 5,35

Contact for electronic fuse 00 36325-0010 10 netto 4,50
monitoring: Tabs for
flat connectors 6,3 mm
Contact hooks for busbar 00 36571-0010 1 NU 1 1,60
mounting without drilling,
TPS up to 250 A
Contact cover with micro switch 00 36889-0010 1 NU 1 12,70
36571-0010
for fuse monitoring on 33120...
Contact hook for busbar 00 36890-0010 1 NU 1 15,00
without drilling
Incoming terminal shroud 00 36896-0010 1 netto 55,00
Solid link for TPS up to 600 A 00 36917-0010 1 netto on demand
Twinning set for parallel 00N 31187-0100 1 NSL 5 8,00
operation of TPS Insulators
Terminal cover 140 mm 1-2-3 31319-0200 1 NSL 5 9,60
Micro switch for position indicating 2 36887-0010 1 netto 5,00
Solid link for TPS up to 1600 A 2 36918-0010 1 netto on demand
Twinning set for parallel operation 2 45071-0100 1 netto 13,45

Supply Bus modules

Description Size Amps Order-No. PU PG Sur. Ag Sur. Cu Price €/pc.

Terminals left 4 66200-0030 1 on demand

Terminals right 4 66201-0030 1 on demand
DC

Terminals left 8 66202-0030 1 on demand

Terminals right 8 66203-0030 1 on demand
Terminals left 12 66204-0030 1 on demand
Terminals right 12 66205-0030 1 on demand
Terminals left 16 66206-0030 1 on demand
66200-0030
Terminals right 16 66207-0030 1 on demand

Technical adaptations possible • Recommended retail price plus VAT • Date: 01.02.2011 389
IN THE LINE OF POWER
Products for DC Applications Technical data
up to 550 V
Questionnaire EFEN-Battery-Switches and -Battery-Fuse- 1. Application
Links for UPS applications • Defined point of intersection between battery and UPS.
• Isolation of the battery during service and maintenance work.
Company: • Protection of the battery and connecting cables against over-
heating and mechanical damage in case of high faults.
Contact person:
2. Specific requirements for EFEN-Battery-Switches and
Phone no. for technical information: Battery-Fuses
• EFEN-single-pole Fuse-Switches DIN-sizes 00 up to 4a are
1. UPS-system specifically suited to disconnect and safeguard backup batteries
in UPS applications. These batteries can in most cases not be
1.1 Manufacturer: protected by general purpose fuselinks but require fast acting
characteristics. The extra heat coming from these Fuse-Links
1.2 Type: has to be regarded when selecting suitable Fuse-Switch-discon-
nectors. EFEN has chosen high temperature and mechanically
1.3 Output power: stable materials that allow for a very compact and durable
design and reliable operating.
1.4 Power factor: • Specific care must be taken when selecting appropriate Fuse-
Links to protect the back-up battery. The fuse elements have to
1.5 Efficiency: be resistant to aging in order to prevent premature operation
under rated service conditions.
1.6 DC circuit voltage: • The fuse-link characteristics has to be carefully selected
according to the UPS and the battery rating in order to provide
1.7 Temporary overload: reliable full range protection of the battery. Experienced applica-
tion engineers in EFEN’s electrical laboratory are prepared to
2. Battery work out proposals for individual applications and to assist the
UPS-designer in this special subject.
2.1 Manufacturer:
Please fill-in and return questionnaire (see left).
2.2 Type:
3. Features and advantages of EFEN Battery Fuse-Switches
2.3 Nominal voltage: and Fuse-Links for UPS
• EFEN Battery-Fuse-Links provide superior short-circuit protecti-
2.4 Nominal capacity: on.
• Silver fuse elements resistant to ageing prevent premature ope-
2.5 Back-up time: ration.
• Low power dissipation prevents overheating of insulating
2.6 Final discharge voltage components.
(after back-up time): • Parallel switching including two arc quenching chambers gives
excellent DC breaking capacity.
2.7 Acceptable overload: • High power acceptance of Fuse-Switches prevent overheating
even under severe load conditions.
Place, date: • Complete choise of Fuse-Switches and Fuse-Links available for
tailor-made protection of major UPS up to 550 V battery voltage
Completed by: in the market.

(Signature)

390 Technical adaptations possible

IN THE LINE OF POWER
Products for DC Applications Technical data
up to 550 V
HRC Battery-Fuse-Links DC 550 V for uninterrupted power supply (UPS)

Description Size Type Order no. Description Pack Weight in kg

HRC Battery-Fuse-Links 00 00 E 35177-0010 NH-BATTERIESICHERUNG 00 E 3 0,148
HRC Battery-Fuse-Links 00 00 G 35177-0030 NH-BATTERIESICHERUNG 00 G 3 0,148
HRC Battery-Fuse-Links 00 00 H 35177-0040 NH-BATTERIESICHERUNG 00 H 3 0,148
HRC Battery-Fuse-Links 00 00 A 35177-0050 NH-BATTERIESICHERUNG 00 A 3 0,148
HRC Battery-Fuse-Links 00 00 B 35177-0060 NH-BATTERIESICHERUNG 00 B 3 0,148
HRC Battery-Fuse-Links 00 00 C 35177-0070 NH-BATTERIESICHERUNG 00 C 3 0,148
HRC Battery-Fuse-Links 00 00 D 35177-0080 NH-BATTERIESICHERUNG 00 D 3 0,148
HRC Battery-Fuse-Links 2C 1A 35178-0010 NH-BATTERIESICHERUNG 1 A 3 0,398
HRC Battery-Fuse-Links 2C 1B 35178-0020 NH-BATTERIESICHERUNG 1 B 3 0,398
HRC Battery-Fuse-Links 2C 1C 35178-0030 NH-BATTERIESICHERUNG 1 C 3 0,398
HRC Battery-Fuse-Links 2 2A 35179-0010 NH-BATTERIESICHERUNG 2 A 3 0,636
HRC Battery-Fuse-Links 2 2B 35179-0020 NH-BATTERIESICHERUNG 2 B 3 0,636
HRC Battery-Fuse-Links 3 3A 35180-0010 NH-BATTERIESICHERUNG 3 A 1 0,915
HRC Battery-Fuse-Links 3 3B 35180-0020 NH-BATTERIESICHERUNG 3 B 1 0,915
HRC Battery-Fuse-Links 3 3C 35180-0030 NH-BATTERIESICHERUNG 3 C 1 0,915
HRC Battery-Fuse-Links 4a 4C 35183-0020 NH-BATTERIESICHERUNG 4 C 1 2,589
HRC Battery-Fuse-Links 4a 4D 35183-0030 NH-BATTERIESICHERUNG 4 D 1 2,589
HRC Battery-Fuse-Links 4a 4E 35183-0040 NH-BATTERIESICHERUNG 4 E 1 2,589

NH Fuse-Switches, 1-pole switching for baseplate mounting

Description Size Order no. Description Pack Weight in kg

Flat terminal M8 00 33107-0010 NH-LATR 00 1P SC G4G4 2 0,359
Multiple use terminal U3 with Pressure plate for 2,5 - 25 mm² 00 33108-0010 NH-LATR 00 1P SC U3U3 2 0,35
Multiple use terminal U4 with Pressure plate 00 33109-0010 NH-LATR 00 1P SC U4U4 2 0,384
and contact prism for 25 - 70 mm²
Flat terminal M10 1 33095-0010 NH-LATR 1 1P SC L5L5 2 2,028
Flat terminal M10 2 33096-0010 NH-LATR 2 1P SC L5L5 2 2,028
Flat terminal M12 3 33097-0010 NH-LATR 3 1P SC L6L6 2 2,221
Flat terminal M16 4a 33047-0010 NH-LATR/UNT 4A 1P L8L8 1 4,136

NH Fuse-Switches, 1-pole switching for busbar mounting

Description Size Order no. Description Pack Weight in kg

Flat terminal M8, branch top/bottom 00 33111-0010 NH-LATR 00 1P SB SC G4 2 0,375
free selection
Multiple use terminal U3 with Pressure plate for 2,5 - 25 mm², 00 33112-0010 NH-LATR 00 1P SB SC U3 2 0,37
branch top/bottom free selection
Multiple use terminal U4 with Pressure plate and 00 33113-0010 NH-LATR 00 1P SB SC U4 2 0,382
contact prism for 25 - 70 mm²,
branch top/bottom free selection
Flat terminal M10, branch top 1 33098-0020 NH-LATR 1 1PO SB SC L5 2 1,676
Flat terminal M10, branch bottom 1 33098-0010 NH-LATR 1 1PU SB SC L5 2 1,681
Flat terminal M10, branch top 2 33099-0020 NH-LATR 2 1PO SB SC L5 2 1,687
DC

Flat terminal M10, branch bottom 2 33099-0010 NH-LATR 2 1PU SB SC L5 2 1,7

Flat terminal M12, branch top 3 33100-0020 NH-LATR 3 1PO SB SC L6 2 1,794
Flat terminal M12, branch bottom 3 33100-0010 NH-LATR 3 1PU SB SC L6 2 1,803
Flat terminal M16, branch top 4a 33048-0020 NH-LATR/UNT 4A 1PO SB L8 1 4,098
Flat terminal M16, branch bottom 4a 33048-0010 NH-LATR/UNT 4A 1PU SB L8 1 4,098

Technical adaptations possible 391

IN THE LINE OF POWER
Products for DC Applications Technical data
up to 550 V
* Size 2 (compact version 2/1) Fuse-Switches and Fuse-Links
VDE 0660 T107
Size a1 a2 b c e1 e2 f g
00 78,5 53 15 35 40 28 12,5 47 System
2C 150 71 20,2 48 50 50 10 65 For uninterruptible power supplies, EFEN offers a complete range
of single-pole compact load-break switches which are specifically
2 150 71 26,2 48 58 58 14,5 65
designed for 550 Volt DC operating voltage. The Load Break Swit-
3 150 72 40 60 70 70 15 65 ches are used to protect batteries and battery-supplied circuits,
4a 200 98 50 85 110 102 28 87 they define the interface and disconnect the system e.g. for service
purposes. Fuse-monitoring devices, signaling devices and a multitude
of accessories are available.

Support
The short-circuit disconnection of a battery system must be precisely
tuned to its capacity and service concept. Battery-Fuses selected in
coordination with EFEN ensure reliable protection.

Indicator

Dimensions
DIN 43620/1

392 Technical adaptations possible

IN THE LINE OF POWER
Products for DC Applications Technical data
up to 550 V
Technical data for single-pole NH Fuse-Switch acc. to VDE 0660 T107/IEC/EN 60 947/3

For LV Fuse-Links acc. to DIN 43620/11 Size 00 1 2 3 4a

Rated operational current Ie A 160 250 400 630 1250
1600 2)

Conventional free air thermal current Ith A 160 250 400 630 1250
1600 2)

Rated operational voltage Ue V 690 690 690 690 690

Rated insulation voltage Ui V 800 800 800 800 800
Rated impuls withstand voltage Uimp kV 8 8 8 8 8
Rated conditional short circuit current kA 50 50 50 50 50
(when protected by Fuse-Links)
Weight without Fuse-Links kg 0,38 2,4 2,4 2,5 4,2
Utilization category IEC/EN 60 947/3 Ue=400 V AC-22 B AC-22 B AC-22 B AC-22 B AC-22 B
Ue=400 V AC-21 B AC-21 B AC-21 B AC-21 B AC-21 B
Ue=400 V) DC-21 B DC-21 B DC-21 B DC-21 B DC-21 B
Permissible ambient air temperature °C -40 to +55

Tightening torques for terminal and busbar mounting

Type of terminal 00 1 2 3 4a
Flat terminal 14 Nm 32 Nm 32 Nm 32 Nm 56 Nm
Multiple use terminal U3 with Pressure Plate 4
Multiple use terminal U4 with Pressure Plate and contact prism 4

DC

Technical adaptations possible 393

IN THE LINE OF POWER
Products for DC Applications Technical data
up to 550 V
NH Fuse-Switches, 1-pole switching for baseplate mounting

Description Size Amps In Order no. Description Pack Weight

in kg
Flat terminal M8 00 160 33107-0010 NH-Latr. 00 1P SC G4G4 2 0,36
Multiple use terminal U3 with Pressure plate 2
00 125 33108-0010 NH-Latr. 00 1P SC U3U3 0,35
for 2,5 - 25 mm²
Multiple use terminal U4 with Pressure plate and 00 160 33109-0010 NH-Latr. 00 1P SC U4U4 2 0,38
contact prism for 25 - 70 mm²
Flat terminal M10 1 250 33095-0010 NH-Latr. 1 1P SC L5L5 2 2,03
Flat terminal M10 2 400 33096-0010 NH-Latr. 2 1P SC L5L5 2 2,03
Flat terminal M12 3 630 33097-0010 NH-Latr. 3 1P SC L6L6 2 2,22
Flat terminal M16 4a 1250 33047-0010 NH-Latr./Unt. 4a 1P L8L8 1 4,14
1600
Flat terminal M12 4a 1600 33047-0070 NH-Latr./Unt. 4a 1P 1600A L6L6 1 4,45

NH Fuse-Switches, 1-pole switching for busbar contacting

Branch Description Size Amps In Order no. Description Pack Weight

cable in kg
Flat terminal M8 00 160 33111-0010 NH-Latr. 00 1P SB SC G4 2 0,38
top/
bottom Multiple use terminal U3 with Pressure 00 125 33112-0010 NH-Latr. 00 1P SB SC U3 2 0,37
choice plate for 2,5 - 25 mm²
when Multiple use terminal U4 with Pressure 00 160 33113-0010 NH-Latr. 00 1P SB SC U4 2 0,38
mounting
plate and contact prism for 25 - 70 mm²
Flat terminal M10 1 250 33098-0020 NH-Latr. 1 1PO SB SC L5 2 1,68
top Flat terminal M10 2 400 33099-0020 NH-Latr. 2 1PO SB SC L5 2 1,69
Flat terminal M12 3 630 33100-0020 NH-Latr. 3 1PO SB SC L6 2 1,79
Flat terminal M16 4a 1250 33048-0020 NH-Latr./Unt. 4a 1POSB L8 1 4,10
Flat terminal M12 4a 1600 33048-0030 NH-LATR/UNT 4A 1PU SB 1600A L6 1 4,35
Flat terminal M10 1 250 33098-0010 NH-Latr. 1 1PU SB SC L5 2 1,68
bottom Flat terminal M10 2 400 33099-0010 NH-Latr. 2 1PU SB SC L5 2 1,70
Flat terminal M12 3 630 33100-0010 NH-Latr. 3 1PU SB SC L6 2 1,80
Flat terminal M16 4a 1250 33048-0010 NH-Latr./Unt. 4a 1PU SB L8 1 4,09
Flat terminal M12 4a 1600 33048-0040 NH-LATR/UNT 4A 1PO SB 1600A L6 1 4,35

394 Technical adaptations possible

IN THE LINE OF POWER
Products for DC Applications Technical data
up to 550 V
NH Fuse-Switches size 00: 125/160 A

Terminals

Flat terminal Multiple use terminal

M8 U3 U4

busbar baseplate
contacting mounting suitable for mounting
(Sb) (Gb) with contact hooks
busbar width mib. 30 mm
* measuremet 60.5 is for flat terminal M8

NH Fuse-Switches size 1 – 3: 250 A, 400 A, 630 A

Terminal top
baseplate
mounting
(Gb) Order no.
of replacement
striker
36031-0010
busbar
contacting
(Sb)
Flat terminal
A 6,3x0,8
DIN 46 244
Size A a b Through-hole Terminal
for b bottom fuse carrier including blown
1 250 100 M10 fuse indicator (see accessories)

2 400 100 M10 Terminal box cover

3 630 115 M12

NH Fuse-Switches size 4a: 1250 A, 1600 A

1250 A 1600 A
Terminal top Ø 18
dimension x = 181.5

DC

Terminal bottom Ø 18
dimension x = 186,5

425 mm required
to remove fuse-carrier

Technical adaptations possible 395

IN THE LINE OF POWER
Products for DC Applications Technical data
up to 750 V
NH Fuse-Bases for base plate mounting, size 3L, for 1500 V AC / 750 V DC

Description Size Amps In Order no. Description Pack Weight in kg

Insert nut M12 3L 425 33039-0010 NH-UNT 3L 1500 V G6 G6 1 1,24
Insert nut M16 3L 630 33040-0010 NH-UNT 3L 1500 V G8 G8 1 1,24

NH Fuse-Bases for base plate mounting, size 3L, for 1500 V AC / 750 V DC, with striker

Description Size Amps In Order no. Description Pack Weight in kg

Insert nut M12 3L 425 33041-0010 NH-UNT 3L 1500 V Ms G6 G6 1 1,24
Insert nut M16 3L 630 33042-0010 NH-UNT 3L 1500 V Ms G8 G8 1 1,24

Accessorie for NH Fuse-Bases size 3L

Description Size Amps In Order no. Description Pack Weight

in kg
Barrier for mounting with screws 3L 30219-0100 Seitentrennwand 1 0,200
2 x M4x28 (screws are not included)

396 Technical adaptations possible

IN THE LINE OF POWER
Products for DC Applications Dimensios drawings
up to 750 V
Insert nut M12, 425 A Insert nut M16, 630 A

DC

Technical adaptations possible 397

IN THE LINE OF POWER
Products for DC Applications Technical data
up to 80 V, TPS-Series
TPS 00/250 Fuse-Bases
TPS Fault Terminator Fuse-Links
are useful in Fuse-Bases alter- DC 80 V 250 A
natve to TPS Fuse-Islators. This
is possible, if no condition of
disconnection is needed and
comfortable handling of the TPS
Fuse-Isolators is not necessary-

Types:
• Baseplate mounting (33120-0010) • Busbar mounting (33003-0020) • Fuse monitoring
see product photo (top) – Contact hook (accessory 36889-0010)

• Supporting rails mounting (33120-0070)

398 Technical adaptations possible

IN THE LINE OF POWER
Products for DC Applications Technical data
up to 80 V, TPS-Series
Technical data
Rated operational voltage: DC 80 V
Permissible ambient air temperature: –40 up to +55 °C

Baseplate mounting

Terminals IN IE Type Order no. Order no. Torque Torque Pack

Standard with fuse monitoring Housing Terminals
M8 250 A 250 A TPS 00/250 33107-0250 33107-0252 5 Nm 14 Nm 2
M12 600 A 400 A TPS 00/600 33107-0600 33107-0602 5 Nm 40 Nm 2
M16 1200 A 1200 A TPS 00/1200 33460-0000 33460-0010 14 Nm 56 Nm 1
2 x M12 1600 A 1200 A TPS 00/1600 33560-0000 33560-0010 14 Nm 40 Nm 1

Busbar mounting

Terminals IN IE Type Order no. Order no. Torque Torque Pack

Standard with fuse monitoring Housing Terminals
M8 250 A 250 A TPS 00/250 33111-0250 33111-0252 14 Nm/6 Nm* 14 Nm 2
M12 600 A 400 A TPS 00/600 33111-0600 33111-0602 40 Nm/15 Nm* 40 Nm 2
M16 1200 A 1200 A TPS 2/1200 33470-0000 33470-0010 14 Nm 56 Nm 1
* when using contact hooks

Accessories

Description Type Order no. Pack

Contact hook for busbar without drilling TPS 00/250 36571-0010 1
TPS 00/600 36890-0010 1
Twinning set for parallel operation of 2 TPS Isolators TPS 00/250 31187-0100 1
TPS 00/600 31187-0100 1
TPS 2/1200 45071-0100 3
TPS 2/1600 45071-0100 3
Terminal cover TPS 2/1200 31319-0200 1
TPS 2/1600 31319-0200 1
Micro switch for position indication TPS 00/250 36107-0010 1
TPS 00/600 36107-0010 1
TPS 2/1200 36887-0010 1
TPS 2/1600 36887-0010 1
Contact for electronic fuse monitoring: Tabs for flat connectors 6,3 mm TPS 00/250 36325-0010 10
Solid-links TPS 00/600 36917-0010 1
TPS 2/1600 36918-0010 1
legard Replacement for fuse-monitoring TPS 2 TPS 2/1200 36031-0010 12
TPS 2/1600 36031-0010 12
DC

Technical adaptations possible 399

IN THE LINE OF POWER
Products for DC Applications Technical data
up to 80 V, TPS-Series
Lid for load circuit of TPS Isolator size 00 (250 & 600 A) Application:

By protection of battery in telecom power supply with TPS Isolator For the capacity test the battery cover is taken out of the inserted
size 00 direct connection of battery is possible with EFEN lid for TPS Isolator with the Fuse-Link. By using the lid for load circuit
load circuit. Telecom power supply is disconnected of the battery. directly a load can be contact the battery to test capacity. After its
Due to test of capacity of the battery with defined loads is possible. completion the lid for load circuit with Fuse-Link can be replaced
and the battery is recharged by system.

Hereby a capacity test is possible without changing the construction

design of the system.

Description Size Amps Order no. Description Pack Weight in kg

Lid for load circuit of TPS Isolator, 00 600 36896-0010 DECKEL GR.00 TPS/600 EXT. 1 1,0
Terminal M12 EINSPEISUNG

400 Technical adaptations possible

IN THE LINE OF POWER
Products for DC Applications Dimensions drawings
up to 80 V, TPS-Series
TPS Fault Terminator

TPS 00/60-600 A TPS 00/60-600 A with striker

TPS 2/800-1600 A

TPS Fuse-Isolator

TPS 00/250

Baseplate mounting Busbar mounting

DC

Technical adaptations possible 401

IN THE LINE OF POWER
Products for DC Applications Dimensions drawings
up to 80 V, TPS-Series
TPS 00/600

Baseplate mounting Busbar mounting

TPS 2/1200
aufgeschaltet

Baseplate mounting

TPS 2/1600
switched off

Baseplate mounting

cable penetration for fuse monitoring

version 33560-0010

402 Technical adaptations possible

IN THE LINE OF POWER
Products for DC Applications Dimensions drawings
up to 80 V, TPS-Series
Fuse-Bases

Baseplate mounting Busbar mounting

Supply bus moduls

Hole for screw M4

Length
4 pol. 80 mm
8 pol. 160 mm
12 pol. 240 mm
16 pol. 386 mm
18 pol. 400 mm
20 pol. 480 mm

min. max.

max.
max.
max.

max.
DC

1 Faston-Knife 6,3 acc. to IEC 61210

2 Faston-Knife 2,8/0,5 acc. to IEC 61210

Technical adaptations possible 403