4" SUBMERSIBLE

TURBINE PUMPS
Since hitting the market in 1988, FE PETRO® brand submersible
pumps have developed a reputation as the standard in performance,
quality and dependability with innovative features only available from
Franklin Fueling Systems. It is, and always will be about filling cars
faster. With best-in-class flow rates and backed by a long history of
dependability, FE PETRO® pumps are responsible for delivering fuel to
thousands of customers around the globe, day in and day out.

TECHNICAL ADVANTAGES
Variable Speed Advanced Protection
With faster fill times during peak hours and power savings during Stop corrosion in its tracks. Special powder-coated, e-coated,
non-peak hours, variable speed submersible pumping systems and stainless steel components defend your pump in the tank
allow you to maximize profits with consistent flow rates while and in the sump from accelerated corrosion.
mitigating operating expenses.
Turbine Pump Interface
MagShell®
Remote enhanced pump monitoring and control including
The patented stainless steel MagShell® ,available on 2 Hp and pump-in-water automation, clogged intake escalation, tank
4 Hp pumps, is designed to maximize flow rate capabilities, leveling, and tank priority.
potential throughput, and profits. By expanding the pump motor
shell, the MagShell® increases the area for product flow by 45%. Intake Filter Screen
Biofuel Compatibility Avoid system damage, pumping slowdowns, and reduce filter
FE PETRO® Alcohol-Gas (AG) and Advanced Protection (AP) changes by keeping harmful tank debris, sediment, and
pumps are UL listed with both UL79A (up to 85% Ethanol) and corrosion from entering the pumping system with this factory-
UL79B (up to 20% or 100% Biodiesel). installed option.

Variable Length
The patented telescoping pump shaft lets installers adjust the
length of the pump onsite for the perfect fit.

FEATURE SELECTION

Variable Speed

Fixed Speed

MagShell®

Biofuel Compatibility*

Variable Length

Advanced Protection

Turbine Pump Interface**

Intake Filter Screen

*Up to 85% Ethanol and up to 20% or 100% Biodiesel.

*Fixed speed models require a Guardian Series™ Single Phase Smart Controller (SPGC-220) to network with EVO™ Series Automatic Tank Gauges.
SPECIFICATIONS
4" Submersible Pump Components & Key Dimensions
• Manhole
1 GRADE LEVEL
• Leak Detector
2

3• Manifold

4• Containment Sump
1
PUMP HEAD
5• 4" Riser CLEARANCE
6• Tank Adapter
2
7• Tank Manway
BURY
8• Column Pipe DEPTH
3
9• Variable Length Coupler
270mm
• Pump Motor Assembly (PMA)
10 REF
• End bell
11

(B)
RISER 5
LENGTH

(A) 9
MODEL
LENGTH

EFFECTIVE
TANK TANK INSIDE
DIAMETER DIAMETER
(ETD)

10

11

BOTTOM
CLEARANCE
127mm TYPICAL

Notes:
1. Effective tank diameter (ETD) = Inside tank diameter (to top of 4" bung), including tank manway and/or sump adapter.
2. Model length (A) = ETD plus riser length minus bottom clearance minus 25mm thread engagement.
3. Riser length (B) = Bury depth (to top of tank) minus pump head clearance minus tank manway and/or minus sump adapter.
SPECIFICATIONS
4" Submersible Pump Manifold Components & Key Dimensions
1• Line Test Port, ¼" NPT
2• Leak Detector Port, 2" NPT
3• Syphon Port, ¼" NPT
297mm
4• Tank Port, ¼" NPT 265mm
5• Riser Pipe, 4" NPT 1

6• Discharge Outlet, 2" NPT

RISER/COLUMN PIPE
CENTERLINE

DISCHARGE/LEAK DETECTOR
CENTERLINE

147mm

270mm 262mm
3 2

5
4 HP SUBMERSIBLE
TURBINE PUMPS
With faster fill times during peak hours and power savings during
non-peak hours, FE PETRO® 4 Hp variable speed submersible pumps
deliver maximized profits while mitigating operating expenses.

TECHNICAL ADVANTAGES
OPTIONAL FEATURES
Biofuel Compatibility Turbine Pump Interface
FE PETRO® pumps are UL listed with both UL79A (up to 85% Remote enhanced pump monitoring and control including
Ethanol) and UL79B (up to 20% or 100% Biodiesel). pump-in-water automation, clogged intake escalation, tank
leveling, and tank priority.
Advanced Protection
Intake Filter Screen
Stop corrosion in its tracks. Special powder-coated, e-coated,
and stainless steel components defend your pump in the tank Avoid system damage, pumping slowdowns, and reduce filter
and in the sump from accelerated corrosion. changes by keeping harmful tank debris, sediment, and
corrosion from entering the pumping system with this factory-
installed option.
STANDARD FEATURES
Variable Speed Simple Servicing
With faster fill times during peak hours and power savings during If ever required, the pump can be easily removed from the tank
non-peak hours, variable speed submersible pumping systems by unthreading three bolts. There is no need to disconnect the
allow you to maximize profits with consistent flow rates while syphon system or to remove the leak detector from the system
mitigating operating expenses. to service the STP.

MagShell® Manual Pressure Relief

The patented stainless steel MagShell® is designed to maximize As a standard FE PETRO® feature, a vent screw is provided to
flow rate capabilities, potential throughput, and profits. By bleed line pressure to zero when necessary. By turning this
expanding the pump motor shell, the MagShell® increases the screw, product is diverted back to the tank, dropping line
area for product flow by 45%. pressure to zero. This reduces fuel discharged into the sump
manhole or dispenser pan during servicing, further protecting
Variable Length service technicians and the environment.
The patented telescoping pump shaft lets installers adjust the
length of the pump onsite for the perfect fit. Outlast, Outperform with Franklin Electric Inside
FE PETRO® STPs are powered by the legendary Franklin Electric
motor and built for long term performance. Franklin Electric-
Active Air Eliminator
powered submersible pumps provide maximum uptime and a
FE PETRO® STPs come standard with active air elimination, proven track record in the fueling industry that spans more than
which eliminates air through the highest point in the pump head four decades. They feature best-in-class flow rates and a long
at all times when the pump is running, assuring air does not history of dependability.
pass into discharge piping.
Quality Certification
Safety and Ease of Maintenance
Franklin Fueling Systems is an ISO 9001 Certified Manufacturer.
FE PETRO® STPs include a contractor electrical disconnect,
which requires loosening only one bolt, allowing motor wiring to
be disconnected without venting the dangerous tank vapors into
the sump when servicing FE PETRO® submersible products.
 SPECIFICATIONS
General Power Requirements
• Variable speed models are available in variable lengths only. • Variable speed pumps can only be controlled by a MagVFC™ or
EcoVFC™ variable frequency controller.
• Check valve: 70mm diameter fluorocarbon seal constructed
with cast aluminum body and steel backing washer. • VS4 models require three-phase incoming power supply to the
EcoVFC™ for proper operation.
• Pressure relief valve: available in four pressure relief settings,
integral to check valve. Standard model relieves at 2.8 bar • Incoming power supply to the EcoVFC™ must be 360-440 VAC,
and resets above 2.4 bar. 50 Hz.
• Syphon: venturi-type syphon primer supplied with every • EcoVFC™ outputs a three-phase, variable frequency signal,
submersible. Syphon check valve and secondary syphon sold valid for FE PETRO® variable speed pumps only.
separately. • EcoVFC™ max. line draw: 20 Amps.
• Air eliminator: every submersible includes a tank return path • Max motor draw: 15 Amps.
with one-way check valve to provide active air elimination.
• Electrical disconnect: electrical yoke for positive contractor Liquid Compatibility
disconnect during service. • Max. liquid viscosity: 70 SSU at 60 °F (15 °C).

Pump Motor • STP variable speed models are UL listed for fuel mixtures
containing up to 10% ethanol, and 20% MTBE, 20% ETBE or
• 4 Hp, variable speed, two-stage centrifugal type pump motor
17% TAME with gasoline.
with integral, automatic, thermal overload protection.
• IST/ISTAP variable speed models are UL and cUL listed for
• Max. pressure: selectable operating pressure on EcoVFC™
fuel mixtures containing diesel fuel with up to 20% Biodiesel,
between 1.65 bar and 2.90 bar deadhead.
100% Biodiesel, up to 85% ethanol with gasoline, and 20%
• Available with MagShell® which results in 45% increased flow MTBE, 20% ETBE or 17% TAME with gasoline.
area around motor.
• All variable speed models can also be used with diesel fuels,
fuel oils, kerosene, Avgas and jet fuels in a non-gelled
Approvals
pourable state.
• cULus listed.
• All wetted elastomers are made of a high grade, fluorocarbon
• Consult factory for applicable approvals. compound.

4 Hp Variable Speed Pump Performance Chart

50

45

40

35
Total Head in Meters

30

25

20

15

10

0
0 50 100 150 200 250 300 350 400 450 500

Flow in Liters per Minute (LPM)

Note: Performance based on pumping gasoline (0.76 specific gravity). Pressure is taken at the manifold discharge
outlet. ISTMVS4 and STPMVS4 turbines can only be powered by a MagVFC with three phase incoming power
ORDERING INFORMATION
4 Hp Submersible Pump Ordering Guide
A typical turbine model designation has up to five components to define the pump being supplied as follows:

XXX YYYYY Z - A - B
XXX = Basic Model Designation
STP = These standard variable speed and variable length models
are capable of up to 10% ethanol with gasoline
IST = These variable speed and variable length models include
alcohol-gasoline compatibility (up to 85% ethanol, up to 20%
Biodiesel, or 100% Biodiesel).
ISTAP = These variable speed and variable length models include
alcohol-gasoline compatibility (up to 85% ethanol, up to 20%
Biodiesel, or 100% Biodiesel) and Advanced Protection with (B)
RISER
powder-coated, e-coated, and stainless steel components. LENGTH

YYYYY = Factory Installed Options

Model designations may include one or more of the following
characters in alphabetical order:
F = Floating suction adapter (1½" NPT female adapter)
K = Intake filter screen (IFS, factory installed to PMA)
M = MagShell® (flow enhancing, expanded PMA shell) (A)
MODEL
LENGTH
R* = Model R check valve (1.7 bar relief / 1.5 bar reset for PLLD)
W* = Model W check valve (1.1 bar relief / 0.9 bar reset for PPM4000)
Z = Pump Motor Horsepower Rating
VS4 = 4 Hp variable speed
A = Model Length (see table)
VL1 = STP variable length range #1
VL2 = STP variable length range #2
VL3 = STP variable length range #3
B = Riser Pipe Length (see diagram)
Riser pipe length is expressed as two numeric characters that
indicate the total length of the riser in inches. Riser pipes are
available from 178mm to 1524mm in 25mm increments Model Length (A)
(additional charge for risers 787mm or longer).
STP Horsepower Model Length Range Model Length Designation
Notes: 1613mm – 2355mm VL1
*If not otherwise specified, all models are supplied with standard model check
valve (2.8 bar relief / 2.4 bar reset for MLD, TS-LS300, and TS-LS500). 4 Hp 2401mm – 3962mm VL2
3214mm – 5556mm VL3
ORDERING INFORMATION
4 Hp Variable Speed Submersible Turbine Pumps
Variable speed, variable length.

Model Length Range

Model Description Model Length Range*
Number
STPMVS4-VL1 4 Hp variable speed with MagShell® VL1 1613mm – 2355mm
STPMVS4-VL2 4 Hp variable speed with MagShell® VL2 2401mm – 3962mm
STPMVS4-VL3 4 Hp variable speed with MagShell® VL3 3214mm – 5556mm

4 Hp Variable Speed Intelligent Submersible Turbine Pumps

Variable speed, variable length, and AG compatible.

Model Length Range

Model Description Model Length Range*
Number
ISTMVS4-VL1 4 Hp AG variable speed with MagShell® VL1 1613mm – 2355mm
ISTMVS4-VL2 4 Hp AG variable speed with MagShell® VL2 2401mm – 3962mm
ISTMVS4-VL3 4 Hp AG variable speed with MagShell® VL3 3214mm – 5556mm
ISTAPMVS4-VL1 4 Hp AG variable speed with Advanced Protection, and MagShell® VL1 1613mm – 2355mm
ISTAPMVS4-VL2 4 Hp AG variable speed with Advanced Protection, and MagShell® VL2 2401mm – 3962mm
ISTAPMVS4-VL3 4 Hp AG variable speed with Advanced Protection, and MagShell® VL3 3214mm – 5556mm

Notes:
1. Remove “M” from model number for non-MagShell® pump motor assembly.
2. All STP models are UL and cUL listed for compatibility with fuel mixtures containing up to 10% ethanol with gasoline, up to 5% Biodiesel with diesel fuels, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
3. All IST/ISTAP models are compatible with fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
4. All models are supplied with a standard check valve unless factory option “R” or “W” is specified.
5. All above models can only be powered by a MagVFC™. 4 hp models require three-phase incoming power supply, 2 hp models can be supplied with single- or three-phase incoming power.
6. 4" riser pipe, if supplied locally, must be 4½" OD by 3/16" WT tubing.
7. For riser pipe length 787mm to 1524mm, additional charge applies (call Customer Service for lead times).
*Model length (A) defined as the dimension from turbine manifold bottom to pump motor inlet.

Factory Installed Approvals

Specified in model number at time of STP order.
Model Description
(ATXF) Submersible Turbine Pumps with ATEX Flameproof approval for EN markets
(RT) Submersible Turbine Pumps with ROSTEST approval for Eastern European markets
Note: If not otherwise specified, all models are supplied to UL approval as standard. Consult factory for local approvals.

Factory Installed Options

Specified in model number at time of STP order.
Model Description
F Floating suction adapter, 1½" NPT female, must be factory installed
K IFS (intake filter screen) factory assembled to pump motor assembly
R Model R check valve, factory installed, for Veeder-Root ® PLLD Line Leak
W Model W check valve, factory installed, for Red Jacket PPM4000 Line Leak

Field Installed Options

Intelligent submersible turbine pump specific accessories.
Model Description
5874202900 EcoVFC™, 4 Hp variable frequency controller, one required per STP or IST
400137937 Syphon check valve, alcohol-gasoline compatible
402459931 Model 65 psi (4.5 bar) check valve AG compatible, (for slave of manifolded STP or IST with Veeder-Root ® PLLD)
402507930 Secondary syphon kit (when two syphon primes are required for one STPM or VS4)
5800300200 STP-DHIB dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each
2 HP SUBMERSIBLE
TURBINE PUMPS
With faster fill times during peak hours and power savings during
non-peak hours, FE PETRO® 2 Hp variable speed submersible pumps
deliver maximized profits while mitigating operating expenses. 2 Hp
submersible pumps are also available in fixed speed models.

TECHNICAL ADVANTAGES
OPTIONAL FEATURES
Variable Speed Turbine Pump Interface
With faster fill times during peak hours and power savings during Remote enhanced pump monitoring and control including
non-peak hours, variable speed submersible pumping systems pump-in-water automation, clogged intake escalation, tank
allow you to maximize profits with consistent flow rates while leveling, and tank priority.
mitigating operating expenses.
Intake Filter Screen
Biofuel Compatibility Avoid system damage, pumping slowdowns, and reduce filter
FE PETRO® pumps are UL listed with both UL79A (up to 85% changes by keeping harmful tank debris, sediment, and
Ethanol) and UL79B (up to 20% or 100% Biodiesel). corrosion from entering the pumping system with this factory-
installed option.
Advanced Protection
Stop corrosion in its tracks. Special powder-coated, e-coated,
and stainless steel components defend your pump in the tank
and in the sump from accelerated corrosion.

STANDARD FEATURES
MagShell® Simple Servicing
The patented stainless steel MagShell is designed to maximize
®
If ever required, the pump can be easily removed from the tank
flow rate capabilities, potential throughput, and profits. By by unthreading three bolts. There is no need to disconnect the
expanding the pump motor shell, the MagShell® increases the syphon system or to remove the leak detector from the system
area for product flow by 45%. to service the STP.

Variable Length Manual Pressure Relief

The patented telescoping pump shaft lets installers adjust the As a standard FE PETRO® feature, a vent screw is provided to
length of the pump onsite for the perfect fit. bleed line pressure to zero when necessary. By turning this
screw, product is diverted back to the tank, dropping line
Active Air Eliminator pressure to zero. This reduces fuel discharged into the sump
manhole or dispenser pan during servicing, further protecting
FE PETRO® STPs come standard with active air elimination,
service technicians and the environment.
which eliminates air through the highest point in the pump head
at all times when the pump is running, assuring air does not Outlast, Outperform with Franklin Electric Inside
pass into discharge piping.
FE PETRO® STPs are powered by the legendary Franklin Electric
motor and built for long term performance. Franklin Electric-
Safety and Ease of Maintenance powered submersible pumps provide maximum uptime and a
FE PETRO® STPs include a contractor electrical disconnect, proven track record in the fueling industry that spans more than
which requires loosening only one bolt, allowing motor wiring to four decades. They feature best-in-class flow rates and a long
be disconnected without venting the dangerous tank vapors into history of dependability.
the sump when servicing FE PETRO® submersible products.
Quality Certification
Franklin Fueling Systems is an ISO 9001 Certified Manufacturer.
SPECIFICATIONS
General Liquid Compatibility
• Variable speed models are available in variable lengths only.
• Max. liquid viscosity: 70 SSU at 60 °F (15 °C).
• Fixed speed models are available in variable length and fixed
• STP variable speed models are UL and cUL listed for fuel
length options.
mixtures containing up to 10% ethanol, and 20% MTBE, 20%
• Check valve: 70mm diameter fluorocarbon seal constructed ETBE or 17% TAME with gasoline.
with cast aluminum body and steel backing washer.
• STPAG (AG compatible) models are UL listed for fuel mixtures
• Pressure relief valve: available in four pressure relief settings, containing diesel fuel with up to 20% Biodiesel, 100%
integral to check valve. Standard model relieves at 2.8 bar Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE,
and resets above 2.4 bar. 20% ETBE or 17% TAME with gasoline.
• Syphon: venturi-type syphon primer supplied with every • All variable speed (non-AG) models can also be used with
submersible. Syphon check valve and secondary syphon sold diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a
separately. non-gelled pourable state.
• Air eliminator: every submersible includes a tank return path • 2 Hp fixed speed models can also be used with diesel fuels,
with one-way check valve to provide active air elimination. fuel oils, kerosene, Avgas and jet fuels in a non-gelled
• Electrical disconnect: electrical yoke for positive contractor pourable state.
disconnect during service. • All wetted elastomers are made of a high grade, fluorocarbon
compound.
Variable Speed Pump Motor
• 2 Hp, variable speed, two-stage centrifugal type pump motor Variable Speed Power Requirements
with integral, automatic, thermal overload protection.
• Variable speed pumps can only be controlled by a MagVFC™
• Max. pressure: selectable operating pressure on MagVFC™ or EcoVFC™ variable frequency controller.
between 1.65 bar and 2.90 bar deadhead.
• VS2 models can operate with single-phase incoming power
• Available with MagShell® which results in 45% increased flow supply to the MagVFC™ or three-phase to EcoVFC™.
area around motor.
• Incoming power supply to the MagVFC™ is 200-250 VAC,
Fixed Speed Pump Motor 50 Hz and 360-440 VAC, 50 Hz to the EcoVFC™.
• 2 Hp fixed speed, 2875 rpm, multi-stage centrifugal • MagVFC™ or EcoVFC™ outputs a three-phase, variable
type pump motor with integral, automatic, thermal frequency signal, valid for FE PETRO® variable speed pumps
overload protection. only.
• Standard pressure (three-stage) model, max. pressure • MagVFC™ or EcoVFC™ max. line draw: 20 Amps.
= 2.55 bar. • Max motor draw: VS2 7 Amps.
• High pressure (four-stage) model, max. pressure =
3.03 bar. Fixed Speed Power Requirements

• Available with MagShell™ for 45% increased flow area • 200B models require single-phase, 200-250 VAC, 50 Hz
around motor. incoming power and 200C models require three-phase
380-415 VAC 50 Hz incoming power.
Approvals • 200B models incorporate a starting and running capacitor,
• cULus listed. with internal bleed resistor, rated 440 Volt, 40 microfarad.

• Consult factory for applicable approvals. • SPGC-220 single-phase Guardian™ Series controllers and
STP-CBBS single-phase control boxes are available for 200B
pump control.
• STP-SCIIIC three phase smart controller and STP-CBB3C
three-phase magnetic starter are available for 200C contol.
• Max. motor draw: 200B 10 Amps, 200C 5 Amps.
SPECIFICATIONS
2 Hp Variable Speed Pump Performance Charts (STPMVS2)
50

45

40

35
Total Head in Meters

30

25

20

15

10

0
0 50 100 150 200 250 300 350 400 450 500
Flow in Liters per Minute (LPM)

Performance based on pumping gasoline (0.76 specific gravity). Pressure is taken at the manifold discharge outlet.
MagShell® Variable Speed 2 hp was powered by MagVFC™ with Single-Phase, 50 Hz, 220 Volt incoming supply or Eco
VFC™ with Three-Phase, 50 Hz, 410 Volt incoming power supply.

2 Hp Single-Phase Fixed Speed Pump Performance Chart (STP200B)

50

45

40

35

30
Total Head in Meters

25

20

15

10

0
0 50 100 150 200 250 300 350 400 450 500
Flow in Liters per Minute (LPM)

Performance based on pumping solvent (0.78 specific gravity). Pressure is taken at the manifold discharge outlet. Fixed
Speed 2.00 HP was powered by Single-Phase, 50 Hz, 250 Volt incoming supply.

2 Hp Three-Phase Fixed Speed Pump Performance Chart (STP200C)

50

45

40

35
Total Head in Meters

30

25

20

15

10

0
0 50 100 150 200 250 300 350 400 450 500
Flow in Liters per Minute (LPM)

Performance based on pumping solvent (0.78 specific gravity). Pressure is taken at the manifold discharge outlet. Fixed
Speed 2.00 HP was powered by Three-Phase, 50 Hz, 415 Volt incoming supply.
ORDERING INFORMATION
2 Hp Variable Speed Submersible Pump Ordering Guide
A typical model designation has up to five components to define
the pump being supplied as follows:
XXX YYYYY Z - A - B
XXX = Basic Model Designation
STP = These standard variable speed and variable length models are capable of up to
10% ethanol with gasoline
IST** = These variable speed and variable length models include alcohol-gasoline
compatibility (up to 85% ethanol, up to 20% Biodiesel, or 100% Biodiesel).
ISTAP** = These variable speed and variable length models include alcohol-gasoline
compatibility (up to 85% ethanol, up to 20% Biodiesel, or 100% Biodiesel) and
Advanced Protection with powder-coated, e-coated, and stainless steel components. (B)
RISER
YYYYY = Factory Installed Options LENGTH
Model designations may include one or more of the following characters in alphabetical
order:
F = Floating suction adapter (1½" NPT female adapter)
K = Intake filter screen (IFS, factory installed to PMA)
M = MagShell® (flow enhancing, expanded PMA shell)
R* = Model R check valve (1.7 bar relief / 1.5 bar reset for PLLD)
W* = Model W check valve (1.1 bar relief / 0.9 bar reset for PPM4000)
(A)
Z = Pump Motor Horsepower Rating MODEL
VS2 = 2 Hp variable speed LENGTH

A = Model Length (see table)

VL1 = STP variable length range #1
VL2 = STP variable length range #2
VL3 = STP variable length range #3
B = Riser Pipe Length (see diagram)
Riser pipe length is expressed as two numeric characters that indicate the total length
of the riser in inches. Riser pipes are available from 7" to 60" in 1" increments
(additional charge for risers 31" or longer).
Notes:
*If not otherwise specified, all models are supplied with standard model check
valve (2.8 bar relief / 2.4 bar reset for MLD, TS-LS300, and TS-LS500).
**If not otherwise specified, 2 Hp variable speed pump motor horsepower
rating is implied for IST models.

2 Hp Fixed Speed Submersible Pump Ordering Guide

A typical model designation has up to five components to define Model Length (A)
the pump being supplied as follows:
STP XXXXX Y - A - B STP
Model Length Range Model Length Designation
Horsepower
STP = Basic Model Designation
1486mm – 2228mm VL1
XXXXX = Factory Installed Options (Model designations may include one or more 2 Hp Variable
2274mm – 3835mm VL2
of the following characters in alphabetical order.) Speed
3087mm – 5429mm VL3
AP = Advanced Protection with powder-coated, e-coated, and stainless steel
1632mm – 2374mm VL1
components, alcohol-gasoline compatible (up to E85, up to B20, and B100) 200B 2 Hp
(Note standard models up to 10% ethanol capable) 2420mm – 3981mm VL2
Fixed Speed
AG = Alcohol-gasoline compatible (up to E85, up to B20, and B100) 3233mm – 5575mm VL3
(Note standard models up to 10% ethanol capable) 1575mm – 2317mm VL1
200C 2 Hp
F = Floating suction adapter (1½" NPT female adapter) 2363mm – 3924mm VL2
Fixed Speed
K = Intake filter screen (IFS, factory installed to PMA) 3175mm – 5518mm VL3
M = MagShell® (flow enhancing, expanded PMA shell) Note: High pressure option adds about 15mm to PMA and model length.
*R = Model R check valve (1.7 bar relief / 1.5 bar reset for PLLD)
*W = Model W check valve (1.1 bar relief / 0.9 bar reset for PPM4000)
Y = Pump Motor Horsepower Rating
200B = 2 Hp fixed speed, 50 Hz, single-phase
200C = 2 Hp fixed speed, 50 Hz, three-phase

A = Model Length (see table)

VL1 = Variable length range #1
VL2 = Variable length range #2
VL3 = Variable length range #3
(Note VL2 models fit 94% of all known installations)

B = Riser Pipe Length (see diagram)

Riser pipe length is expressed as two numeric characters that indicate the total
Notes: *If not otherwise specified, all STP models are supplied with standard model
length of the riser in inches. Riser pipes are available from 178mm to 1524mm
check valve (2.8 bar relief / 2.4 bar reset for MLD, TS-LS300, and TS-LS500).
in 25mm increments (additional charge for risers 787mm or longer).
ORDERING INFORMATION
2 Hp Variable Speed Submersible Turbine Pumps
Variable speed, variable length.

Model Length Range

Model Description Model Length Range*
Number
STPMVS2-VL1 2 Hp variable speed with MagShell ®
VL1 1486mm – 2228mm
STPMVS2-VL2 2 Hp variable speed with MagShell® VL2 2274mm – 3835mm
STPMVS2-VL3 2 Hp variable speed with MagShell® VL3 3087mm – 5429mm

2 Hp Variable Speed Intelligent Submersible Turbine Pumps

Variable speed, variable length, and AG compatible.
Model Length Range
Model Description Model Length Range*
Number
ISTM-1 2 Hp AG variable speed with MagShell® VL1 1486mm – 2228mm
ISTM-2 2 Hp AG variable speed with MagShell® VL2 2274mm – 3835mm
ISTM-3 2 Hp AG variable speed with MagShell® VL3 3087mm – 5429mm
ISTAPM-1 2 Hp AG variable speed with Advanced Protection, and MagShell® VL1 1486mm – 2228mm
ISTAPM-2 2 Hp AG variable speed with Advanced Protection, and MagShell® VL2 2274mm – 3835mm
ISTAPM-3 2 Hp AG variable speed with Advanced Protection, and MagShell® VL3 3087mm – 5429mm

Single-Phase 2 Hp Fixed Speed Submersible Turbine Pumps

Model Length Range
Model Description Model Length Range*
Number
STPM200B-VL1 2 Hp fixed speed with MagShell® VL1 1632mm – 2374mm
STPM200B-VL2 2 Hp fixed speed with MagShell® VL2 2420mm – 3981mm
STPM200B-VL3 2 Hp fixed speed with MagShell® VL3 3233mm – 5575mm
STPHM200B-VL1 2 Hp high pressure fixed speed with MagShell® VL1 1647mm – 2389mm
STPHM200B-VL2 2 Hp high pressure fixed speed with MagShell® VL2 2435mm – 3996mm
STPHM200B-VL3 2 Hp high pressure fixed speed with MagShell® VL3 3248mm – 5590mm

Three-Phase 2 Hp Fixed Speed Submersible Turbine Pumps

Model Length Range
Model Description Model Length Range*
Number
STPM200C-VL1 2 Hp fixed speed with MagShell ®
VL1 1575mm – 2317mm
STPM200C-VL2 2 Hp fixed speed with MagShell® VL2 2363mm – 3924mm
STPM200C-VL3 2 Hp fixed speed with MagShell® VL3 3175mm – 5518mm
STPHM200C-VL1 2 Hp high pressure fixed speed with MagShell® VL1 1590mm – 2332mm
STPHM200C-VL2 2 Hp high pressure fixed speed with MagShell® VL2 2378mm – 3939mm
STPHM200C-VL3 2 Hp high pressure fixed speed with MagShell® VL3 3190mm – 5533mm

Single-Phase Alcohol-Gas (AG) 2 Hp Fixed Speed Submersible Turbine Pumps

Model Length Range
Model Description Model Length Range*
Number
STPAGM200B-VL1 2 Hp AG fixed speed with MagShell ®
VL1 1632mm – 2374mm
STPAGM200B-VL2 2 Hp AG fixed speed with MagShell® VL2 2420mm – 3981 mm
STPAGM200B-VL3 2 Hp AG fixed speed with MagShell® VL3 3233mm – 5575mm
STPAGHM200B-VL1 2 Hp AG high pressure fixed speed with MagShell® VL1 1647mm – 2389mm
STPAGHM200B-VL2 2 Hp AG high pressure fixed speed with MagShell® VL2 2435mm – 3996mm
STPAGHM200B-VL3 2 Hp AG high pressure fixed speed with MagShell® VL3 3248mm – 5590mm
STPAPM200B-VL1 2 Hp fixed speed with Advanced Protection, and MagShell® VL1 1632mm – 2374mm
STPAPM200B-VL2 2 Hp fixed speed with Advanced Protection, and MagShell® VL2 2420mm – 3981mm
STPAPM200B-VL3 2 Hp fixed speed with Advanced Protection, and MagShell® VL3 3233mm – 5575mm
STPAPHM200B-VL1 2 Hp high pressure fixed speed with Advanced Protection, and MagShell® VL1 1647mm – 2389mm
STPAPHM200B-VL2 2 Hp high pressure fixed speed with Advanced Protection, and MagShell® VL2 2435mm – 3996mm
STPAPHM200B-VL3 2 Hp high pressure fixed speed with Advanced Protection, and MagShell® VL3 3248mm – 5590mm
Notes:
1. Remove “M” from model number for non-MagShell® pump motor assembly.
2. STP models are compatible with fuel mixtures containing up to 10% ethanol with gasoline, up to 5% Biodiesel with diesel fuels, and 20% MTBE, 20% ETBE or 17% TAME with gasoline. STPAG/ STPAP models
are compatible with fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
3. All models are supplied with a standard check valve unless factory option “R” or “W” is specified.
4. All above 200B models require single-phase, 200-250 VAC, 50 Hz incoming power. All above 200C models require three-phase, 380-415 VAC, 50 Hz incoming power.
5. 4" riser pipe, if supplied locally, must be 4½" OD by 3/16" WT tubing.
6. For riser pipe lengths 787mm to 1524mm, additional charges apply (call Customer Service for lead times).
*Model length (A) defined as the dimension from turbine manifold bottom to pump motor inlet.
ORDERING INFORMATION
Three-Phase Alcohol-Gas (AG) 2 Hp Fixed Speed Submersible Turbine Pumps
Model Length Range
Model Description Model Length Range*
Number
STPAGM200C-VL1 2 Hp AG fixed speed with MagShell ®
VL1 1575mm – 2317mm
STPAGM200C-VL2 2 Hp AG fixed speed with MagShell® VL2 2363mm – 3924mm
STPAGM200C-VL3 2 Hp AG fixed speed with MagShell® VL3 3175mm – 5518mm
STPAGHM200C-VL1 2 Hp AG high pressure fixed speed with MagShell® VL1 1590mm – 2332mm
STPAGHM200C-VL2 2 Hp AG high pressure fixed speed with MagShell® VL2 2378mm – 3939mm
STPAGHM200C-VL3 2 Hp AG high pressure fixed speed with MagShell® VL3 3190mm – 5533 mm
STPAPM200C-VL1 2 Hp fixed speed with Advanced Protection, and MagShell® VL1 1575mm – 2317mm
STPAPM200C-VL2 2 Hp fixed speed with Advanced Protection, and MagShell® VL2 2363mm – 3924mm
STPAPM200C-VL3 2 Hp fixed speed with Advanced Protection, and MagShell® VL3 3175mm – 5518mm
STPAPHM200C-VL1 2 Hp high pressure fixed speed with Advanced Protection, and MagShell® VL1 1590mm – 2332mm
STPAPHM200C-VL2 2 Hp high pressure fixed speed with Advanced Protection, and MagShell® VL2 2378mm – 3939mm
STPAPHM200C-VL3 2 Hp high pressure fixed speed with Advanced Protection, and MagShell® VL3 3190mm – 5533mm
Notes:
1. Remove “M” from model number for non-MagShell® pump motor assembly.
2. STP models are compatible with fuel mixtures containing up to 10% ethanol with gasoline, up to 5% Biodiesel with diesel fuels, and 20% MTBE, 20% ETBE or 17% TAME with gasoline. STPAG/ STPAP models
are compatible with fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
3. All models are supplied with a standard check valve unless factory option “R” or “W” is specified.
4. All above 200B models require single-phase, 200-250 VAC, 50 Hz incoming power. All above 200C models require three-phase, 380-415 VAC, 50 Hz incoming power.
5. 4" riser pipe, if supplied locally, must be 4½" OD by 3/16" WT tubing.
6. For riser pipe lengths 787mm to 1524mm, additional charges apply (call Customer Service for lead times).
*Model length (A) defined as the dimension from turbine manifold bottom to pump motor inlet.

Factory Installed Approvals

Specified in model number at time of STP order.
Model Description
(ATXF) Submersible Turbine Pumps with ATEX Flameproof approval for EN markets
(RT) Submersible Turbine Pumps with ROSTEST approval for Eastern European markets
Note: If not otherwise specified, all models are supplied to UL approval as standard. Consult factory for local approvals.

Factory Installed Options

Specified in model number at time of STP order.
Model Description
F Floating suction adapter, 1½" NPT female, must be factory installed
K IFS (intake filter screen) factory assembled to pump motor assembly
R Model R check valve, factory installed, for Veeder-Root ® PLLD Line Leak
W Model W check valve, factory installed, for Red Jacket PPM4000 Line Leak

Field Installed Options

2 Hp submersible pump specific accessories.
Model Description
400137937 Syphon check valve, alcohol-gasoline compatible
5874202800 MagVFC™, 2 hp or 4 hp variable frequency controller, one required per VS2 or IST
5874202900 EcoVFC™, 2 hp variable frequency controller, one required per VS2 or IST
400818922 STP-CBBS, single-phase control box with lockout switch, 240 Volt coil
402312932 STP-DHIB + SPGC-220 Guardian Series™ Single Phase Smart Controller bundle
402313922 STP-DHIB-CBBS, combo DHI with factory-wired STP-CBBS single-phase control box
402459931 Model 65 psi (4.5 bar) check valve AG compatible, (for slave of manifolded STPs with Veeder-Root ® PLLD)
402507930 Secondary syphon kit (when two syphon primes are required for one STP)
5800100220 SPGC-220 Guardian Series™ Single Phase Smart Controller
401220965 STP-CBB3C three-phase, 380-415 VAC magnetic starter
5800103300 STP-SCIIIC three-phase, 380-415 VAC smart controller
5800300200 STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each
1½ HP SUBMERSIBLE
TURBINE PUMPS
FE PETRO® 1½ Hp fixed speed submersible pumps deliver
consistent flow rates for medium throughput fuels.

TECHNICAL ADVANTAGES
OPTIONAL FEATURES
Biofuel Compatibility Turbine Pump Interface
FE PETRO® pumps are UL listed with both UL79A (up to 85% Remote enhanced pump monitoring and control including
Ethanol) and UL79B (up to 20% or 100% Biodiesel). pump-in-water automation, clogged intake escalation, tank
leveling, and tank priority.
Variable Length
The patented telescoping pump shaft lets installers adjust the Intake Filter Screen
length of the pump onsite for the perfect fit. Avoid system damage, pumping slowdowns, and reduce filter
changes by keeping harmful tank debris, sediment, and
Advanced Protection corrosion from entering the pumping system with this factory-
Stop corrosion in its tracks. Special powder-coated, e-coated, installed option.
and stainless steel components defend your pump in the tank
and in the sump from accelerated corrosion.

STANDARD FEATURES
Active Air Eliminator Manual Pressure Relief
FE PETRO® STPs come standard with active air elimination, As a standard FE PETRO® feature, a vent screw is provided to
which eliminates air through the highest point in the pump head bleed line pressure to zero when necessary. By turning this
at all times when the pump is running, assuring air does not screw, product is diverted back to the tank, dropping line
pass into discharge piping. pressure to zero. This reduces fuel discharged into the sump
manhole or dispenser pan during servicing, further protecting
Safety and Ease of Maintenance service technicians and the environment.
FE PETRO® STPs include a contractor electrical disconnect,
which requires loosening only one bolt, allowing motor wiring to Outlast, Outperform with Franklin Electric Inside
be disconnected without venting the dangerous tank vapors into FE PETRO® STPs are powered by the legendary Franklin Electric
the sump when servicing FE PETRO® submersible products. motor and built for long term performance. Franklin Electric-
powered submersible pumps provide maximum uptime and a
Simple Servicing proven track record in the fueling industry that spans more than
four decades. They feature best-in-class flow rates and a long
If ever required, the pump can be easily removed from the tank
history of dependability.
by unthreading three bolts. There is no need to disconnect the
syphon system or to remove the leak detector from the system
to service the STP. Quality Certification
Franklin Fueling Systems is an ISO 9001 Certified Manufacturer.
SPECIFICATIONS
General Power Requirements
• 1½ Hp fixed speed models are available in variable length • 150B fixed speed models require single-phase, 200-250 VAC,
and fixed length options. 50 Hz incoming power. 150C fixed speed models require
three-phase 380-415 VAV, 50 Hz incoming power.
• Check valve: 70mm diameter fluorocarbon seal constructed
with cast aluminum body and steel backing washer. • 150B fixed speed models incorporate a starting and running
capacitor, with internal bleed resistor, rated 440 Volt, 15
• Pressure relief valve: available in four pressure relief settings,
microfarad.
integral to check valve. Standard model relieves at 2.8 bar
and resets above 2.4 bar. • SPGC single-phase Guardian™ Series Controllers and
STP-CBBS single-phase control boxes are available for 150B
• Syphon: venturi-type syphon primer supplied with every
pump control.
submersible. Syphon check valve and secondary syphon sold
separately. • STP-SCIIC three phase controllers and STP-CBB3C three-
phase magnetic starters are available for 150C control.
• Air eliminator: every submersible includes a tank return path
with one-way check valve to provide active air elimination. • Max. motor draw: 150B 9 Amps, 150C 3 Amps.
• Electrical disconnect: electrical yoke for positive contractor Liquid Compatibility
disconnect during service.
• Max. liquid viscosity: 70 SSU at 60 °F (15 °C).
Pump Motor • Standard STP models are UL and cUL listed for fuel
• 1½ Hp fixed speed, 2875 rpm, multi-stage centrifugal type mixtures containing up to 10% ethanol with gasoline, and
pump motor with integral, automatic, thermal overload 20% MTBE, 20% ETBE or 17% TAME with gasoline.
protection.
• STPAP/STPAG (AG compatible) models are UL listed for fuel
• Standard pressure (three-stage) model, max. pressure = mixtures containing diesel fuel with up to 20% Biodiesel,
2.62 bar. 100% Biodiesel, up to 85% ethanol with gasoline, and 20%
• High pressure (four-stage) model, max. pressure = 3.31 bar. MTBE, 20% ETBE or 17% TAME
with gasoline.
• 1½ Hp fixed speed models can also be used with diesel
Approvals fuels, fuel oils, kerosene, Avgas, and jet fuels in a non-gelled
• cULus listed. pourable state.
• Consult factory for applicable approvals. • All wetted elastomers are made of a high grade,
fluorocarbon compound.

1½ Hp Single-Phase Fixed Speed Pump 1½ Hp Three-Phase Fixed Speed Pump

Performance Chart (STP150B) Performance Chart (STP150C)
50 50

45 45

40 40

35 35
Total Head in Meters

Total Head in Meters

30 30

25 25

20 20

15 15

10 10

5 5

0 0
0 50 100 150 200 250 300 350 400 450 0 500 50 100 150 200 250 300 350 400 450 50

Flow in Liters per Minute (LPM) Flow in Liters per Minute (LPM)

Note: Performance based on pumping gasoline (0.78 specific gravity). Pressure is taken at the manifold discharge outlet. Note: Performance based on pumping gasoline (0.78 specific gravity). Pressure is taken at the manifold discharge outlet.
150B models are powered by a 250 Volt power supply. 150C models are powered by a 415 Volt power supply.
ORDERING INFORMATION
1½ Hp Fixed Speed Submersible Pump Ordering Guide
A typical turbine model designation has up to five components
to define the pump being supplied as follows:

STP XXXXX Y - A - B
STP = Basic Model Designation
XXXXX = Factory Installed Options (Model designations may
include one or more of the following characters in
alphabetical order.)
(B)
AP = Advanced Protection with powder-coated, e-coated, and RISER
LENGTH
stainless steel components, alcohol-gasoline compatible (up to
E85, up to B20, and B100) (Note standard models up to 10%
ethanol capable)
AG = Alcohol-gasoline compatible (up to E85, up to B20, and
B100) (Note standard models up to 10% ethanol capable)
F = Floating suction adapter (1½" NPT female adapter)
K = Intake filter screen (IFS, factory installed to PMA) (A)
MODEL
*R = Model R check valve (1.7 bar relief / 1.5 bar reset for PLLD) LENGTH

*W = Model W check valve (1.1 bar relief / 0.9 bar reset for
PPM4000)
Y = Pump Motor Horsepower Rating
150B = 1½ hp fixed speed, 50 Hz, single-phase
150C = 1½ hp fixed speed, 50 Hz, three-phase
A = Model Length (see table)
VL1 = Variable length range #1.
VL2 = Variable length range #2.
VL3 = Variable length range #3.
(Note VL2 models fit 94% of all known installations)
B = Riser Pipe Length (see diagram)
Riser pipe length is expressed as two numeric characters that
Model Length (A)
indicate the total length of the riser in inches. Riser pipes are
available from 178mm to 1524mm in 25mm increments STP
Model Length Range Model Length Designation
(additional charge for risers 787mm or longer). Horsepower
1556mm – 2298mm VL1
150B 1½ Hp
Notes: *If not otherwise specified, all STP models are supplied with standard model 2344mm – 3905mm VL2
Fixed Speed
check valve (2.8 bar relief / 2.4 bar reset for MLD, TS-LS300, and TS-LS500). 3156mm – 5499mm VL3
1531mm – 2273mm VL1
150C 1½ Hp
2318mm – 3879mm VL2
Fixed Speed
3131mm – 5473mm VL3

Note: High pressure option adds about 13mm to PMA and model length.
ORDERING INFORMATION
Single-Phase 1½ Hp Fixed Speed Submersible Turbine Pumps
Model Length Range
Model Description Model Length Range*
Number
STP150B-VL1 1½ Hp fixed speed VL1 1556mm – 2298mm
STP150B-VL2 1½ Hp fixed speed VL2 2344mm – 3905mm
STP150B-VL3 1½ Hp fixed speed VL3 3156mm – 5499mm
STPH150B-VL1 1½ Hp high pressure fixed speed VL1 1569mm – 2311mm
STPH150B-VL2 1½ Hp high pressure fixed speed VL2 2357mm – 3918mm
STPH150B-VL3 1½ Hp high pressure fixed speed VL3 3169mm – 5512mm

Three-Phase 1½ Hp Fixed Speed Submersible Turbine Pumps

Model Length Range
Model Description Model Length Range*
Number
STP150C-VL1 1½ Hp fixed speed VL1 1531mm – 2273mm
STP150C-VL2 1½ Hp fixed speed VL2 2318mm – 3879mm
STP150C-VL3 1½ Hp fixed speed VL3 3131mm – 5473mm
STPH150C-VL1 1½ Hp high pressure fixed speed VL1 1544mm – 2286mm
STPH150C-VL2 1½ Hp high pressure fixed speed VL2 2331mm – 3892mm
STPH150C-VL3 1½ Hp high pressure fixed speed VL3 3144mm – 5486mm

Single-Phase Alcohol-Gas (AG) 1½ Hp Fixed Speed Submersible Turbine Pumps

Model Length Range
Model Description Model Length Range*
Number
STPAG150B-VL1 1½ Hp AG fixed speed VL1 1556mm – 2298mm
STPAG150B-VL2 1½ Hp AG fixed speed VL2 2344mm – 3905mm
STPAG150B-VL3 1½ Hp AG fixed speed VL3 3156mm – 5499mm
STPAGH150B-VL1 1½ Hp AG high pressure fixed speed VL1 1569mm – 2311mm
STPAGH150B-VL2 1½ Hp AG high pressure fixed speed VL2 2357mm – 3918mm
STPAGH150B-VL3 1½ Hp AG high pressure fixed speed VL3 3169mm – 5512mm
STPAP150B-VL1 1½ Hp fixed speed with Advanced Protection VL1 1556mm – 2298mm
STPAP150B-VL2 1½ Hp fixed speed with Advanced Protection VL2 2344mm – 3905mm
STPAP150B-VL3 1½ Hp fixed speed with Advanced Protection VL3 3156mm – 5499mm
STPAPH150B-VL1 1½ Hp high pressure fixed speed with Advanced Protection VL1 1569mm – 2311mm
STPAPH150B-VL2 1½ Hp high pressure fixed speed with Advanced Protection VL2 2357mm – 3918mm
STPAPH150B-VL3 1½ Hp high pressure fixed speed with Advanced Protection VL3 3169mm – 5512mm

Three-Phase Alcohol-Gas (AG) 1½ Hp Fixed Speed Submersible Turbine Pumps

Model Length Range
Model Description Model Length Range*
Number
STPAG150C-VL1 1½ Hp AG fixed speed VL1 1531mm – 2273mm
STPAG150C-VL2 1½ Hp AG fixed speed VL2 2318mm – 3879mm
STPAG150C-VL3 1½ Hp AG fixed speed VL3 3131mm – 5473mm
STPAGH150C-VL1 1½ Hp AG high pressure fixed speed VL1 1544mm – 2286mm
STPAGH150C-VL2 1½ Hp AG high pressure fixed speed VL2 2331mm – 3892mm
STPAGH150C-VL3 1½ Hp AG high pressure fixed speed VL3 3144mm – 5486mm
STPAP150C-VL1 1½ Hp fixed speed with Advanced Protection VL1 1531mm – 2273mm
STPAP150C-VL2 1½ Hp fixed speed with Advanced Protection VL2 2318mm – 3879mm
STPAP150C-VL3 1½ Hp fixed speed with Advanced Protection VL3 3131mm – 5473mm
STPAPH150C-VL1 1½ Hp high pressure fixed speed with Advanced Protection VL1 1544mm – 2286mm
STPAPH150C-VL2 1½ Hp high pressure fixed speed with Advanced Protection VL2 2331mm – 3892mm
STPAPH150C-VL3 1½ Hp high pressure fixed speed with Advanced Protection VL3 3144mm – 5486mm
Notes:
1. STP models are compatible with fuel mixtures containing up to 10% ethanol with gasoline, up to 5% Biodiesel with diesel fuels, and 20% MTBE, 20% ETBE or 17% TAME with
gasoline. STPAG/STPAP models are compatible with fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20%
MTBE, 20% ETBE or 17% TAME with gasoline.
2. All models are supplied with a standard check valve unless factory option “R” or “W” is specified.
3. All above 150B models require single-phase, 200-250 VAC, 50 Hz incoming power. All above 150C models require single-phase, 380-450 VAC, 50 Hz incoming power.
4. 4" riser pipe, if supplied locally, must be 4½" OD by 3/16" WT tubing.
5. For riser pipe lengths 787mm to 1524mm, additional charges apply (call Customer Service for lead times).
*Model length (A) defined as the dimension from turbine manifold bottom to pump motor inlet.
Factory Installed Approvals
Specified in model number at time of STP order.
Model Description
(ATXF) Submersible Turbine Pumps with ATEX Flameproof approval for EN markets
(RT) Submersible Turbine Pumps with ROSTEST approval for Eastern European markets
Note: If not otherwise specified, all models are supplied to UL approval as standard. Consult factory for local approvals.

Factory Installed Options

Specified in model number at time of STP order.
Model Description
F Floating suction adapter, 1½" NPT female, must be factory installed
K IFS (intake filter screen) factory assembled to pump motor assembly
R Model R check valve, factory installed, for Veeder-Root ® PLLD Line Leak
W Model W check valve, factory installed, for Red Jacket PPM4000 Line Leak

Field Installed Options

1½ Hp fixed speed specific accessories.
Model Description
400137937 Syphon check valve, alcohol-gasoline compatible
400818922 STP-CBBS, single-phase control box with lockout switch, 240 Volt coil
402312932 STP-DHIB + SPGC-220 Guardian Series™ Single Phase Smart Controller bundle
402313922 STP-DHIB-CBBS, combo DHIB with factory-wired STP-CBBS single-phase control box
402459931 Model 65 psi (4.5 bar) check valve AG compatible, (for slave of manifolded STPs with Veeder-Root ® PLLD)
402507930 Secondary syphon kit (when two syphon primes are required for one STP)
5800100220 SPGC-220 Guardian Series™ Single Phase Smart Controller
401220965 STP-CBB3C three-phase, 380-415 VAC magnetic starter
5800103300 STP-SCIIIC three-phase, 380-415 VAC smart controller
5800300200 STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each
¾ HP SUBMERSIBLE
TURBINE PUMPS
FE PETRO® 1½ Hp fixed speed submersible pumps deliver consistent
flow rates for low throughput fuels.

TECHNICAL ADVANTAGES
OPTIONAL FEATURES
Biofuel Compatibility Turbine Pump Interface
FE PETRO® pumps are UL listed with both UL79A (up to 85% Remote enhanced pump monitoring and control including
Ethanol) and UL79B (up to 20% or 100% Biodiesel). pump-in-water automation, clogged intake escalation, tank
leveling, and tank priority.
Variable Length
The patented telescoping pump shaft lets installers adjust the Intake Filter Screen
length of the pump onsite for the perfect fit. Avoid system damage, pumping slowdowns, and reduce filter
changes by keeping harmful tank debris, sediment, and
Advanced Protection corrosion from entering the pumping system with this factory-
Stop corrosion in its tracks. Special powder-coated, e-coated, installed option.
and stainless steel components defend your pump in the tank
and in the sump from accelerated corrosion.

STANDARD FEATURES
Active Air Eliminator Manual Pressure Relief
FE PETRO® STPs come standard with active air elimination, As a standard FE PETRO® feature, a vent screw is provided to
which eliminates air through the highest point in the pump head bleed line pressure to zero when necessary. By turning this
at all times when the pump is running, assuring air does not screw, product is diverted back to the tank, dropping line
pass into discharge piping. pressure to zero. This reduces fuel discharged into the sump
manhole or dispenser pan during servicing, further protecting
Safety and Ease of Maintenance service technicians and the environment.
FE PETRO® STPs include a contractor electrical disconnect,
which requires loosening only one bolt, allowing motor wiring to Outlast, Outperform with Franklin Electric Inside
be disconnected without venting the dangerous tank vapors into FE PETRO® STPs are powered by the legendary Franklin Electric
the sump when servicing FE PETRO® submersible products. motor and built for long term performance. Franklin Electric-
powered submersible pumps provide maximum uptime and a
Simple Servicing proven track record in the fueling industry that spans more than
four decades. They feature best-in-class flow rates and a long
If ever required, the pump can be easily removed from the tank
history of dependability.
by unthreading three bolts. There is no need to disconnect the
syphon system or to remove the leak detector from the system
to service the STP. Quality Certification
Franklin Fueling Systems is an ISO 9001 Certified Manufacturer.
SPECIFICATIONS
General Power Requirements
• ¾ Hp fixed speed models are available in variable length and • 75B fixed speed models require single-phase, 200-250 VAC,
fixed length options. 50 Hz incoming power. 75C fixed speed models require
three-phase, 380-415 VAC, 50 Hz incoming power
• Check valve: 70mm diameter fluorocarbon seal constructed
with cast aluminum body and steel backing washer. • 75B fixed speed models incorporate a starting and running
capacitor, with internal bleed resistor, rated 440 Volt,
• Pressure relief valve: available in four pressure relief settings,
15 microfarad.
integral to check valve. Standard model relieves at 2.8 bar
and resets above 2.4 bar. • SPGC-220 single-phase Guardian™ Series Controllers and
STP-CBBS single-phase control boxes are available for 75B
• Syphon: venturi-type syphon primer supplied with every
pump control.
submersible. Syphon check valve and secondary syphon sold
separately. • STP-SCIIIC three-phase smart controller and STP-CBB3C
three-phase magnetic starter are available for 75C control
• Air eliminator: every submersible includes a tank return path
with one-way check valve to provide active air elimination. • ¾ Hp max. motor draw: 75B 6 Amps, 75C 3 Amps.
• Electrical disconnect: electrical yoke for positive contractor Liquid Compatibility
disconnect during service. • Max. liquid viscosity: 70 SSU at 60 °F (15 °C).
Pump Motor • Standard STP models are UL and cUL listed for fuel
• ¾ Hp fixed speed, 2875 rpm, two-stage centrifugal type mixtures containing up to 10% ethanol with gasoline, and
pump motor with integral, automatic thermal overload 20% MTBE, 20% ETBE or 17% TAME with gasoline.
protection. • STPAG/STPAP (AG compatible) models are UL listed for fuel
• ¾ Hp models have a max. pressure of 2.55 bar. mixtures containing diesel fuel with up to 20% Biodiesel,
100% Biodiesel, up to 85% ethanol with gasoline, and 20%
MTBE, 20% ETBE or 17% TAME with gasoline.
Approvals • ¾ Hp fixed speed models can also be used with diesel fuels,
• cULus listed. fuel oils, kerosene, Avgas, and jet fuels in a non-gelled
pourable state.
• Consult factory for applicable approvals.
• All wetted elastomers are made of a high grade,
fluorocarbon compound.

¾ Hp Single-Phase Fixed Speed Pump ¾ Hp Three-Phase Fixed Speed Pump

Performance Chart (STP75B) Performance Chart (STP75C)
50 50

45 45

40 40

35 35
Total Head in Meters
Total Head in Meters

30 30

25 25

20 20

15 15

10 10

5 5

0 0
0 50 100 150 200 250 300 350 400 450 0 500 50 100 150 200 250 300 350 400 450 50

Flow in Liters per Minute (LPM) Flow in Liters per Minute (LPM)

Note: Performance based on pumping gasoline (0.78 specific gravity). Pressure is taken at the manifold discharge outlet. Note: Performance based on pumping gasoline (0.78 specific gravity). Pressure is taken at the manifold discharge outlet.
75B models are powered by a single-phase, 250 Volt power supply. 75C models are powered by a single-phase, 415 Volt power supply.
ORDERING INFORMATION
¾ Hp Fixed Speed Submersible Pump Ordering Guide
A typical turbine model designation has up to five components to
define the pump being supplied as follows:

STP XXXXX Y - A - B
STP = Basic Model Designation
XXXXX = Factory Installed Options (Model designations may
include one or more of the following characters in
alphabetical order.)
AP = Advanced Protection with powder-coated, e-coated, and (B)
stainless steel components, alcohol-gasoline compatible (up to RISER
LENGTH
E85, up to B20, and B100) (Note standard models up to 10%
ethanol capable)
AG = Alcohol-gasoline compatible (up to E85, up to B20, and
B100) (Note standard models up to 10% ethanol capable)
F = Floating suction adapter (1½" NPT female adapter)
K = Intake filter screen (IFS, factory installed to PMA)
(A)
*R = Model R check valve (1.7 bar relief / 1.5 bar reset for PLLD) MODEL
LENGTH
*W = Model W check valve (1.1 bar relief / 0.9 bar reset for
PPM4000)
Y = Pump Motor Horsepower Rating
75B = ¾ Hp fixed speed, 50 Hz, single-phase
75C = ¾ Hp fixed speed, 50 Hz, three-phase
A = Model Length (see table)
VL1 = Variable length range #1.
VL2 = Variable length range #2.
VL3 = Variable length range #3.
(Note VL2 models fit 94% of all known installations)
B = Riser Pipe Length (see diagram)
Riser pipe length is expressed as two numeric characters that Model Length (A)
indicate the total length of the riser in inches. Riser pipes are
available from 178mm to 1524mm in 25mm increments STP
Model Length Range Model Length Designation
Horsepower
(additional charge for risers 787mm or longer).
1499mm – 2241mm VL1
Notes: *If not otherwise specified, all STP models are supplied with standard model 75B ¾ Hp
2286mm – 3848mm VL2
check valve (2.8 bar relief / 2,4 bar reset for MLD, TS-LS300, and TS-LS500). Fixed Speed
3099mm – 5441mm VL3
1480mm – 2222mm VL1
75C ¾ Hp
2267mm – 3829mm VL2
Fixed Speed
3080mm – 5422mm VL3
ORDERING INFORMATION
Single-Phase ¾ Hp Fixed Speed Submersible Turbine Pumps
Model Length Range
Model Description Model Length Range*
Number
STP75B-VL1 ¾ Hp fixed speed VL1 1499mm – 2241mm
STP75B-VL2 ¾ Hp fixed speed VL2 2286mm – 3848mm
STP75B-VL3 ¾ Hp fixed speed VL3 3099mm – 5441mm

Three-Phase ¾ Hp Fixed Speed Submersible Turbine Pumps

Model Length Range
Model Description Model Length Range*
Number
STP75C-VL1 ¾ Hp fixed speed VL1 1480mm – 2222mm
STP75C-VL2 ¾ Hp fixed speed VL2 2267mm – 3829mm
STP75C-VL3 ¾ Hp fixed speed VL3 3080mm – 5422mm

Single-Phase Alcohol-Gas (AG) ⅓ and ¾ Hp Fixed Speed Submersible Turbine Pumps

Model Length Range
Model Description Model Length Range*
Number
STPAG75B-VL1 ¾ Hp AG fixed speed VL1 1499mm – 2241mm
STPAG75B-VL2 ¾ Hp AG fixed speed VL2 2286mm – 3848mm
STPAG75B-VL3 ¾ Hp AG fixed speed VL3 3099mm – 5441mm
STPAP75B-VL1 ¾ Hp fixed speed with Advanced Protection VL1 1499mm – 2241mm
STPAP75B-VL2 ¾ Hp fixed speed with Advanced Protection VL2 2286mm – 3848mm
STPAP75B-VL3 ¾ Hp fixed speed with Advanced Protection VL3 3099mm – 5441mm

Three-Phase Alcohol-Gas (AG) ⅓ and ¾ Hp Fixed Speed Submersible Turbine Pumps

Model Length Range
Model Description Model Length Range*
Number
STPAG75C-VL1 ¾ Hp AG fixed speed VL1 1480mm – 2222mm
STPAG75C-VL2 ¾ Hp AG fixed speed VL2 2267mm – 3829mm
STPAG75C-VL3 ¾ Hp AG fixed speed VL3 3080mm – 5422mm
STPAP75C-VL1 ¾ Hp fixed speed with Advanced Protection VL1 1480mm – 2222mm
STPAP75C-VL2 ¾ Hp fixed speed with Advanced Protection VL2 2267mm – 3829mm
STPAP75C-VL3 ¾ Hp fixed speed with Advanced Protection VL3 3080mm – 5422mm

Notes:
1. STP models are compatible with fuel mixtures containing up to 10% ethanol with gasoline, up to 5% Biodiesel with diesel fuels, and 20% MTBE, 20% ETBE or 17% TAME
with gasoline. STPAG/STPAP models are compatible with fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and
20% MTBE, 20% ETBE or 17% TAME with gasoline.
2. All models are supplied with a standard check valve unless factory option “R” or “W” is specified.
3. All above 75B models require single-phase, 200-250 VAC, 50 Hz incoming power. All above 75C models require three-phase, 380-415 VAC, 50 Hz incoming power.
4. 4" riser pipe, if supplied locally, must be 4½" OD by 3/16" WT tubing.
5. For riser pipe lengths 787mm to 1524mm, additional charges apply. (Call Customer Service for lead times.)
*Model length (A) defined as the dimension from turbine manifold bottom to pump motor inlet.
Factory Installed Approvals
Specified in model number at time of STP order.
Model Description
(ATXF) Submersible Turbine Pumps with ATEX Flameproof approval for EN markets
(RT) Submersible Turbine Pumps with ROSTEST approval for Eastern European markets
Note: If not otherwise specified, all models are supplied to UL approval as standard. Consult factory for local approvals.

Factory Installed Options

Specified in model number at time of STP order.
Model Description
F Floating suction adapter, 1½" NPT female, must be factory installed
K IFS (intake filter screen) factory assembled to pump motor assembly
R Model R check valve, factory installed, for Veeder-Root ® PLLD Line Leak
W Model W check valve, factory installed, for Red Jacket PPM4000 Line Leak

Field Installed Options

¾ Hp fixed speed specific accessories.
Model Description
400137937 Syphon check valve, alcohol-gasoline compatible
400818922 STP-CBBS, single-phase control box with lockout switch, 240 Volt coil
402312932 STP-DHIB + SPGC-220 Guardian Series™ Single Phase Smart Controller bundle
402313922 STP-DHIB-CBBS, combo DHIB with factory-wired STP-CBBS single-phase control box
402459931 Model 65 psi (4.5 bar) check valve AG compatible, (for slave of manifolded STPs with Veeder-Root ® PLLD)
402507930 Secondary syphon kit (when two syphon primes are required for one STP)
5800100220 SPGC-220 Guardian Series™ Single Phase Smart Controller
401220965 STP-CBB3C three-phase, 380-415 VAC magnetic starter
5800103300 STP-SCIIIC three-phase, 380-415 VAC smart controller
5800300200 STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each

franklinfueling.com
3760 Marsh Rd. • Madison, WI 53718, USA
Tel: USA & Canada +1 800 225 9787 • Fax: +1 608 838 6433
© 2020 Franklin Fueling Systems. All Rights Reserved.
Tel: UK +44 (0) 1473 243300 • Tel: Mex 001 800 738 7610
Tel: DE +49 6571 105 380 • Tel: CH +86 10 8565 4566 FFS-0801 02-21