945E
Excavator
Engine Cummins
Gross Power 280 kW (375 hp) @ 2,000 rpm
Net Power 275 kW (368 hp) @ 1,800 rpm
Maximum Digging Depth 7,860 mm
Standard Bucket Capacity 2.2 m3
Operating Weight 45,500 kg
www.liugong.com
945E
Excavator
ENGINE REFERENCE ARM
Emission Regulation Tier2 / Stage II Arm Length 3,380 mm
Make Cummins Arm Breakout Force, normal, ISO 209 kN
Gross Power 280 kW (375 hp) @ 2,000 rpm Arm Breakout Force, boost, ISO 225 kN
Net Power 275 kW (368 hp) @ 1,800 rpm
Peak Torque 1898 N·m @ 1,400 rpm WORKING RANGES
Number of Cylinders 6 Maximum Dig Depth 7,860 mm
Displacement 10.8 L Reach at Ground Level 11,810 mm
Depth of 8’ Level Bottom 7,720 mm
TRACK DRIVE Maximum Dig Height 10,790 mm
Maximum Travel Speed 5.5 km/h Dump Height 7,520 mm
Gradeability 70 % Maximum Dig Depth of Vertical Wall 6,440 mm
Drawbar Pull 386 kN
BUCKET PERFORMANCE
UNDERCARRIAGE Standard Bucket Heaped Capacity (Referenced) 2.2 m3
Shoe Width 600 mm Minimum Heaped Capacity of Bucket Options 1.9 m3
Number of Shoes per Side 49 Maximum Heaped Capacity of Bucket Options 2.6 m3
Number of Bottom Rollers per Side 8 Bucket Breakout Force, normal, ISO 268 kN
Number of Upper Rollers per Side 2 Bucket Breakout Force, boost, ISO 288 kN
HYDRAULIC SYSTEM SERVICE CAPACITIES
Main Pumps Total Flow 2×380 L/min Fuel Tank 650 L
Relief Pressure, main 32.3 MPa Engine Oil 31 L
Relief Pressure, boost 35.3 MPa Cooling System 50 L
Pilot Pump Flow 28.5 L/min Hydraulic Reservoir 290 L
Hydraulic System Total 540 L
SWINGSYSTEM
Swing Speed 9 rpm
Bucket: SAE2.2 m3, 2250 kg Boom: 7,060 mm Arm: 3,380 mm Shoes: 600 mm Counterweight: 9,000 kg
Rating over-front Rating over-side Unit: 1000 kg
Lift
Point
Height
3m 4m 5m 6m 7m 8m 9m 10m
7m ※10.5 7.4 ※10.1 5.7
6m ※10.9 7.2 ※10.3 5.6
4m ※24.6 21.2 ※19.1 15.0 ※15.8 11.1 ※13.6 8.5 ※12.2 6.7 8.5 5.3 7.0 4.2
2m ※31.4 18.1 ※23.4 12.9 16.0 9.7 12.4 7.6 9.9 6.1 8.1 4.9 6.7 4.0
0m ※39.9 30.3 ※32.0 17.2 20.3 11.9 15.1 8.9 11.7 7.0 9.4 5.6 7.8 4.6 6.5 3.8
-2m ※36.3 30.7 ※29.4 17.3 20.5 11.7 14.8 8.7 11.5 6.8 9.3 5.5 7.7 4.5
-4 m ※29.3 29.3 ※24.3 18.0 ※20.3 12.1 ※17.0 8.9 11.7 7.0 9.4 5.6
-6m ※15.3 ※15.3 ※13.0 ※13.0 ※10.5 ※10.5
1. ※ Indicates the load is limited by hydraulic capacity rather than tipping capacity.
2. The above rated loads are in compliance with ISO 10567 hydraulic excavator lift capacity rating standard. They do not exceed 87% of hydraulic lifting capacity or
75% tipping load.
3. Ratings at bucket lift hook.
Guangxi Liugong Machinery Co., Ltd. 09/2012 Designed by LiuGong
No. 1 Liutai Road, Liuzhou, Guangxi 545007, PR China
T: +86 772 388 6124 E:
[email protected]www.liugong.com
Specifications and designs are subject to change without notice. Machines shown may include optional equipment.
