Scribd
Upload
527 views2 pages

K41L XRZ: Truck-Mounted Concrete Boom Pump

This document summarizes the specifications of a truck-mounted concrete boom pump. It has a 5-section placing boom over 40 meters in reach and a pumping unit that can pump up to 179 cubic meters of concrete per hour at pressures up to 130 bars. It mounts on a standard 4-axle truck chassis and has features like front and rear hydraulic outriggers for stabilization and radio remote controls. Dimensions and specifications can vary depending on the truck assembly.

Uploaded by

Ataa Assaad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
527 views2 pages

K41L XRZ: Truck-Mounted Concrete Boom Pump

This document summarizes the specifications of a truck-mounted concrete boom pump. It has a 5-section placing boom over 40 meters in reach and a pumping unit that can pump up to 179 cubic meters of concrete per hour at pressures up to 130 bars. It mounts on a standard 4-axle truck chassis and has features like front and rear hydraulic outriggers for stabilization and radio remote controls. Dimensions and specifications can vary depending on the truck assembly.

Uploaded by

Ataa Assaad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

K41L XRZ TRUCK-MOUNTED CONCRETE

Placing boom
BOOM PUMP
B5RZ 41/36
Pumping unit HPG 1808/1113 IF9
HPG 1408 IF9 PA 1506/909 F8
Driven by PTO
Chassis 4 assi

Dimensions

Dimensions varying according to truck assembly


K41L XRZ TRUCK-MOUNTED CONCRETE

Placing boom
BOOM PUMP
B5RZ 41/36
Pumping unit HPG 1808/1113 IF9
HPG 1408 IF9 PA 1506/909 F8
Main features Driven by PTO
• Advantageous assembling on standard 4 axles chassis Chassis 4 assi
• Self-supporting frame, torsion free, FEM designed
• Placing boom B5RZ 41/36, 5 sections, pipeline diameter
125 mm, “RZ” folding system
• Fully hydraulic outrigger controls on both sides of the truck Pumping unit technical data
• Front “X” style diagonal outriggers with double telescopic opening HPG HPG PA
and swing-out rear outriggers for a quick and easy set-up also in Model 1808/1113 1408 1506/909
narrow areas IF9 IF9 F8
• “Load Sensing” proportional boom control
• “BFC” Best-Flex Cifa supporting system allowing just one Max. theorical output m3/h 179/105 140 150/90
man to change delivery pipeline easily, quickly and safe
Max. pressure
• Concrete flow rate regulator on concrete bar 76/130 80 53/95
• Safety device on opening inspection hatch
• HPG-IF pumping unit with closed circuit and reversal flow: Max. numbers nr. 36/21 28 30/17
superb performances, high pressures and output, high reliability and of cycles per min.
easy and reduced maintenance; 9 inches S valve Conc. cylinders mm 230x2000 230x2000 230x2000
alternatively: (diam. x stroke)
F8 pumping system with open circuit: smooth, continuous and easy
pumping, combined with high reliability Concrete hopper capacity l 650 600 550

Hydraulic circuit closed closed open


Standard equipment
• 2 Proportional radio control with two boom movement speed,
synthesizer for automatic frequency search, 8 position joy stick and Placing boom technical data
concrete flow rate regulator. 20 mt cable
• Emergency control pad for pumping unit HPG 1808/1113 IF Model B5RZ 41/36
• Remote controlled electric vibrator placed on the concrete hopper grid
• Centralized lubrification system for pumping unit Pipeline diameter mm 125
• Automatic oil lubrification system for pumping pistons on HPG
1808/1113IF
Max. vertical reach m 40,1
• Additional manual lubrification system for pumping unit
• Hard plastic outrigger support plates with relative housing Max. horizontal distance
• Rear light on hopper (from center of slewing axis) m 35,8
• Level readers for stabilization control
• Accessories for cleaning and pipes washing Min. unfolding height m 7,8
• Double thickness concrete pipes, in high resistant steel - CIFA Long
Life Pipes Section numbers 5
• Aluminium hopper covering
1st section opening angle 90°
Optional
2nd section opening angle 180°
• High pressure water pump
• Air compressor for pipeline cleaning 3rd section opening angle 180°
• Centralized lubrification system for placing boom
• Air pipeline for placing boom 4th section opening angle 237°
• Separated emergency engine kit for independent control of the
hopper mixer, concrete pumping unit, boom and water pump
5th section opening angle 244°
• Pumping unit Electronic version: HPG 1408 IF9 EPC
Rotating angle 370°

End hose lenght m 4

Technical data and characteristics subject to modifications without notice


K41L_ENG_0210

CIFA S.p.A.
via Stati Uniti d’America, 26
20030 Senago (Milano) - Italia
tel.: +39.02.990131 - fax: +39.02.9981157
www.cifa.com

You might also like