Dear Customer, PIN code card Arm/Disarm the alarm system

Congratulations for your purchase of this alarm system. Your alarm PIN code can be found on the PIN code card (credit card To prevent false alarms, check that there is no one in the
size) provided by your authorized retailer. car, and that all windows, and sliding roof are closed
Please take the time to read this manual to learn its functions and before locking the car.
to get the full usage of it. This code consists of four digits and
Action Blinkers indication Alarm status light (LED)
We suggest that you keep this manual in the car. It will be easier for allows you to activate / deactivate the Press the lock The blinkers will confirm The LED will be on and
you to find the information in the event of emergency. Your alarm system manually (emergency button once. that the car is locked by after 30 seconds will
authorized retailer will be pleased to clarify any queries you may override). Please refer to the “emergency flashing once. start blinking to indicate
override” section for the procedure to the system is armed.
have with the system or its operation if you cannot find the Press the The blinkers will confirm The LED will be off.
information you need in this manual. use this code.
unlock button that the car is unlocked
once. by flashing twice.
Your new alarm system protects your vehicle against intrusions by You should keep this card always with you. Do not leave it in
monitoring the bonnet, doors and boot, and is capable of detecting your car.
movements in the vehicle thanks to its intrusion sensor. It also If you have lost your PIN code, please contact your authorized Arm without intrusion sensor and /or
detects if your car is lifted to protect it against towing or wheel retailer.
theft*. The alarm is also self-protected against wiring attacks or inclination sensor
battery disconnection.
If you have to lock the car with somebody inside (passenger,
In case of intrusion, the alarm will generate a powerful sound,
Operation children, pet…), or if you want to leave the window open, the
activate the vehicle horn, the blinkers and dome lamp to deter the intrusion sensor needs to be disabled to avoid false alarms.
This alarm system is operated by the original remote control
intruder. Similarly, if your vehicle may move when locked (on a ferry for
described in the vehicle owner’s manual. To program extra remote
instance), level monitor should be disabled to avoid false alarms.
Additionally, the alarm features a LED and stickers to put off any controls, please consult your Toyota authorized retailer.
attack before it would even begin. The LED also provides the alarm To disable the intrusion sensor and / or the inclination sensor, press
status and will indicate you if alarm was triggered during your the push-button under the LED within 5s after the vehicle is
absence, and what triggered it. switched off. Keep it pressed until the LED blinks back:

LED feedback Sensor disabled

1 flash Intrusion sensor
* This functionality is only available if your alarm includes inclination 2 flash Inclination sensor
sensor. Please contact your authorized retailer in case you would The alarm system is set when the car is locked and unset when the 3 flash Intrusion sensor + Inclination
like to upgrade your alarm. car is unlocked using the remote key or smart key system. sensor

Opening the vehicle with the mechanical key would result

Note concerning the intrusion sensor in triggering of the alarm. In such a case, please refer to The sensors are only disabled for the next vehicle lock (alarm set).
section "Emergency Override". At the next time the car is locked, all sensors will activate again.
The intrusion sensor protects the vehicle by detecting movement in
the vehicle.
Alarm is incompatible with “Double locking function”. If
Automatic re-arming (only for models with
False detection may be caused by:
• Dangling accessories “Double locking function” is enabled, alarm will be smart key)
• Automatic or high pressure car washes triggered when vehicle is unlocked.
If the car is unlocked by smart key or door handle and within 30
• The impact of hail, lightning strikes, or other kinds of
seconds no door or trunk lid is opened, the door lock system will re-
impact or continuous vibrations
lock the car automatically and the alarm system will arm.
• Open windows or open sliding roof
• Remote Cabin heater (if not installed as recommended)
LED status Emergency Override Vehicle Security System
The Alarm LED indicates the Alarm status: This procedure allows you to manually arm or disarm the alarm. VSS4
Condition Alarm status light (LED) To disarm the system:
Disarm state LED off 1. Press the button under the LED the number of times that Owner Manual – English
Pre-arming state LED on corresponds to the first digit of the PIN Code, with a
Armed state LED blinking (slow) maximum 1.5s delay between one press and the next.
Alarm state LED blinking (fast)
2. Wait for the LED to flash, then enter next digit.
3. Repeat the process for all four digits.
If the alarm was triggered during your absence, the blinkers will
4. When the correct code is entered, the alarm will disarm.
blink 4 times and the buzzer 4 times when the doors are unlocked.
The alarm system memory will display via the LED what triggered
To arm the system:
the alarm. The LED will display this until the vehicle is switched on.
Use same procedure as above to arm the system. Alarm will arm
Trigger Alarm status light (LED) after second digit.
Driver door 1 blink
Intrusion sensor 2 blinks
Bonnet 3 blinks Troubleshooting
Trunk 5 blinks
Issue Cause
Other door 6 blinks
Buzzer bips 3x when vehicle is Bonnet is opened
Vehicle security system 7 blinks
locked
Wiring attack 8 blinks
Buzzer bips 4x when vehicle is Intrusion was detected in your absence,
Unauthorized unlock 9 blinks
unlocked please refer to chapter “LED status”
Level Monitor 10 blinks
Long buzz when vehicle is One of the doors is opened
locked
Blinkers blink every 12s Starting Garage mode failed, close bonnet
and restart garage mode procedure.
Blinkers blink 5 times when Garage mode has just been cancelled. See
AOM 001 675-1
Garage mode engine starts chapter “garage mode”

The alarm system can be deactivated for a limited period of time.

During garage mode, all the alarm system functions are disabled. Warranty information
To activate garage mode: - In case of loss caused by fire, action of a third party, or
1. Make sure that the alarm is disarmed and the bonnet is other accidents, or the user’s deliberate or accidental
closed. misuse, incorrect use, or use under abnormal conditions,
2. Switch on the vehicle (Ignition On). repair of the product will be charged to the user.
3. Open the driver door. - Toyota Motor Europe NV/SA is not liable for any incidental
4. Insert PIN Code loss caused by the use or non-use of this product.
- Toyota Motor Europe NV/SA is not liable for any damages
The hazards lights will give 5 flashes for confirmation.
or incidents consequent to intentional misuse, accidental
After 10 cycles of Ignition on/off, the garage mode will be cancelled. misuse, or third party use of the device.
The hazards will flash 5 times. Garage mode can also be cancelled - The alarm system will not prevent the car from being
by repeating the activation procedure. stolen.
-