DRAFT-EI-M4-002, Date: 2012/04/06
ORBIT MOTORS
YMP SERIES HYDRAULIC MOTOR
YMP series motors are small volume, economical type, which is designed with shaft distribution
flow, which adapt the Gerotor gear set design and provide compact volume, high power and low
weight.
Characteristic Features:
• Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high
efficiency and long life.
• Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
• Advanced construction design, high power and low weight.
Graphical Symbol
SPECIFICATIONS:
YMP YMP YMP YMP YMP YMP YMP YMP YMP YMP
Type
36 50 80 100 125 160 200 250 315 400
Geometric Displacement
36 51.7 77.7 96.2 120.2 157.2 194.5 240.3 314.5 389.5
(cm³/rev.)
Cont. 1500 1150 770 615 490 383 310 250 192 155
Max. Speed
(rpm) Int. 1650 1450 960 770 615 475 385 310 240 190
Cont. 55 100 146 182 236 302 360 380 375 360
Max. Torque
Int. 76 128 186 227 290 370 440 460 555 525
(Nm)
Peak 96 148 218 264 360 434 540 550 650 680
Max. Output Cont. 8.0 10.0 10.0 11.0 10.0 10.0 10.0 8.5 7.0 6.0
(kW) Int. 11.5 12.0 12.0 13.0 12.0 12.0 12.0 10.5 8.5 7.0
Cont. 12.5 14.0 14.0 14.0 14.0 14.0 14.0 11.0 9.0 7.0
Max. Pressure
Int. 16.5 17.5 17.5 17.5 17.5 17.5 17.5 14.0 14.0 10.5
Drop (MPa)
Peak 22.5 22.5 22.5 22.5 22.5 22.5 22.5 18.0 16.0 14.0
Max. Flow Cont. 55.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0
(L/min.) Int. 60.0 75.0 75.0 75.0 75.0 75.0 75.0 75.0 75.0 75.0
Weight (kg) 5.6 5.6 5.7 5.9 6.0 6.2 6.4 7.0 6.9 7.4 O
* Continuous pressure : Max. value of operating motor continuously.
* Intermittent pressure : Max. value of operating motor in 6 seconds per minute.
Orbit Motors
1/2
DRAFT-EI-M4-002, Date: 2012/04/06
ORBIT MOTORS
* Peak pressure : Max. value of operating motor in 0.6 second per minute.
MODEL NUMBER DESIGNATION:
YMP -36 -SA1 -K1 -A -R -00 -00 -10
Rotation
Port Sizes
Type of Direction
Model Type of Special Design*
Displacement Flange Main Paint
Number Shaft Drain As viewed Features Number
Mounting Ports
Port from shaft end
(A&B)
R:
36 Clockwise
50 SA1: when port
80 2 Bolt- “A” is
100 Ø13.5x106.4 K1:
Shaft Ø25, End Port pressurized 00: 00:
YMP 125 –Oval flange, G1/4 10
parallel key G1/2 No paint Standard
160 spigot L:
200 Ø82.5x8 8x7x32
Counter-
250 clockwise
315 when port “B”
400 is pressurized
* Design numbers subject to change but installation dimensions remain as shown.
Orbit Motors
2/2
DRAFT-EI-M4-002, Date: 2012/04/06
ORBIT MOTORS
MOUNTING DETAILS:
Orbit Motors
3/2
DRAFT-EI-M4-002, Date: 2012/04/06
ORBIT MOTORS
PERFORMANCE DATA:
YMP 36 (36 cm³/rev.) YMP 50 (51.7 cm³/rev.)
Orbit Motors
4/2
DRAFT-EI-M4-002, Date: 2012/04/06
ORBIT MOTORS
YMP 80 (77.7 cm³/rev.) YMP 100 (96.2 cm³/rev.)
YMP 125(120.2 cm³/rev.)
YMP 160(157.2 cm³/rev.)
O
YMP 200(194.5 cm³/rev.) YMP 250(240.3 cm³/rev.)
Orbit Motors
5/2
DRAFT-EI-M4-002, Date: 2012/04/06
ORBIT MOTORS
YMP315 (314.5 cm³/rev.)
O
YMP 400 (389.5 cm³/rev.)
Orbit Motors
6/2
DRAFT-EI-M4-002, Date: 2012/04/06
ORBIT MOTORS
Orbit Motors
7/2
