14Φ SERIES

Metal Oxide Varistor (MOV) Data Sheet

Features

■ Wide operating voltage (V1mA) range from 18V to 1800V

■ Fast responding to transient over-voltage
■ Large absorbing transient energy capability
■ Low clamping ratio and no follow-on current
■ Meets MSL level 1, per J-STD-020
■ Operating Temperature：-40℃ ~ +85℃
■ Storage Temperature：-40℃ ~ +125℃
■ Safety certification: UL: E327997
CSA: 246579
VDE: 40027827

Applications

■ Transistor, diode, IC, thyristor or triac semiconductor protection

■ Surge protection in consumer electronics
■ Surge protection in industrial electronics
■ Surge protection in electronic home appliances, gas and petroleum appliances
■ Relay and electromagnetic valve surge absorption

Part Number Code

Revision：30-Jun-16 1 / 12 www.brightking.com
 14Φ SERIES
Dimensions

Table 1 Table 2

Unit: mm Unit: mm

Symbol Dimension Model T e Model T e

H 14.5~20.0 180K 2.0~3.9 1.5 361K 2.9~5.2 2.7

H1 17.0~21.0 220K 2.1~4.0 1.6 391K 3.0~5.4 2.8
L(min.) 20.0 270K 2.1~4.1 1.8 431K 3.2~5.6 3.0
L1(min.) 15.0 330K 2.2~4.3 1.7 471K 3.3~5.8 3.2
D 14.0~16.5 390K 2.1~4.1 1.8 511K 3.4~6.1 3.4
F(±0.8) 7.5 470K 2.2~4.3 1.9 561K 3.6~6.4 3.6
T Table 2 560K 2.3~4.6 2.1 621K 3.8~6.8 3.9
e(±0.8) Table 2 680K 2.4~4.8 2.4 681K 4.0~7.1 4.2
d(±0.05) 0.8 820K 2.1~4.1 1.8 751K 4.3~7.2 4.3
d1(±0.4) 1.4 101K 2.4~4.2 2.0 781K 4.4~7.3 4.4
121K 2.4~4.4 2.2 821K 4.6~7.5 4.6
151K 2.2~4.1 1.8 911K 4.8~7.5 5.0
181K 2.3~4.2 1.9 102K 5.4~8.0 5.0
201K 2.4~4.3 2.0 112K 5.8~8.5 5.4
221K 2.5~4.4 2.1 122K 5.9~9.0 5.8
241K 2.6~4.5 2.2 142K 6.9~10.5 6.6
271K 2.6~4.6 2.4 162K 7.4~11.0 7.4
301K 2.7~4.6 2.5 182K 7.6~12.0 8.2
331K 2.7~5.0 2.5

Revision：30-Jun-16 2 / 12 www.brightking.com
 14Φ SERIES
Electrical Characteristics

Maximum Maximum Withstanding Maximum Typical

Part Varistor Rated
Allowable Clamping Surge Energy Capacitance
Number Voltage Power
Voltage Voltage Current (10/1000μs) (Reference)

I (A) (J)
High I (A) (J)
Standard VAC(V) VDC(V) V1mA(V) IP(A) VC(V) High High (W) @1KHz (pf)
Surge Standard Standard
Surge Surge

180KD14 180KD14J 11 14 18(15~21.6) 10 36 1000 2000 4.0 7.0 0.1 11100

220KD14 220KD14J 14 18 22(19.5~26) 10 43 1000 2000 5.0 8.0 0.1 9100

270KD14 270KD14J 17 22 27(24~31) 10 53 1000 2000 6.0 10.0 0.1 7400

330KD14 330KD14J 20 26 33(29.5~36.5) 10 65 1000 2000 7.5 12.0 0.1 6100

390KD14 390KD14J 25 31 39(35~43) 10 77 1000 2000 8.6 13.0 0.1 5100

470KD14 470KD14J 30 38 47(42~52) 10 93 1000 2000 10.0 17.0 0.1 4300

560KD14 560KD14J 35 45 56(50~62) 10 110 1000 2000 11.0 20.0 0.1 3600

680KD14 680KD14J 40 56 68(61~75) 10 135 1000 2000 14.0 24.0 0.1 2900

820KD14 820KD14J 50 65 82(74~90) 50 135 4500 6000 22.0 27.0 0.6 2400

101KD14 101KD14J 60 85 100(90~110) 50 165 4500 6000 28.0 33.0 0.6 2000

121KD14 121KD14J 75 100 120(108~132) 50 200 4500 6000 32.0 40.0 0.6 1700

151KD14 151KD14J 95 125 150(135~165) 50 250 4500 6000 40.0 53.0 0.6 1300

181KD14 181KD14J 115 150 180(162~198) 50 300 4500 6000 50.0 60.0 0.6 1100

201KD14 201KD14J 130 170 200(180~220) 50 340 4500 6000 57.0 70.0 0.6 1000

221KD14 221KD14J 140 180 220(198~242) 50 360 4500 6000 60.0 78.0 0.6 900

241KD14 241KD14J 150 200 240(216~264) 50 395 4500 6000 63.0 84.0 0.6 830

271KD14 271KD14J 175 225 270(243~297) 50 455 4500 6000 70.0 99.0 0.6 740

301KD14 301KD14J 190 250 300(270~330) 50 500 4500 6000 77.0 108 0.6 670

331KD14 331KD14J 210 275 330(297~363) 50 550 4500 6000 85.0 115 0.6 610

361KD14 361KD14J 230 300 360(324~396) 50 595 4500 6000 93.0 130 0.6 560

391KD14 391KD14J 250 320 390(351~429) 50 650 4500 6000 100 140 0.6 510

431KD14 431KD14J 275 350 430(387~473) 50 710 4500 6000 115 155 0.6 460

471KD14 471KD14J 300 385 470(423~517) 50 775 4500 6000 125 175 0.6 430

511KD14 511KD14J 320 415 510(459~561) 50 845 4500 6000 125 180 0.6 390

561KD14 561KD14J 350 460 560(504~616) 50 925 4500 6000 125 185 0.6 360

621KD14 621KD14J 385 505 620(558~682) 50 1025 4500 6000 125 190 0.6 320

681KD14 681KD14J 420 560 680(612~748) 50 1120 4500 6000 130 200 0.6 290

751KD14 751KD14J 460 615 750(675~825) 50 1240 4500 6000 143 210 0.6 270

781KD14 781KD14J 485 640 780(702~858) 50 1290 4500 6000 148 220 0.6 260

821KD14 821KD14J 510 670 820(738~902) 50 1355 4500 6000 157 235 0.6 240

911KD14 911KD14J 550 745 910(819~1001) 50 1500 4500 6000 175 255 0.6 220

102KD14 102KD14J 625 825 1000(900~1100) 50 1650 4500 6000 190 280 0.6 200

112KD14 112KD14J 680 895 1100(990~1210) 50 1815 4500 6000 213 310 0.6 180

122KD14 122KD14J 750 990 1200(1080~1320) 50 1980 4500 6000 232 324 0.6 160

142KD14 142KD14J 880 1140 1400(1260~1540) 50 2310 4500 6000 238 327 0.6 150

162KD14 162KD14J 1000 1280 1600(1440~1760) 50 2640 4500 6000 243 331 0.6 140

182KD14 182KD14J 1100 1465 1800(1620~1980) 50 2970 4500 5000 250 335 0.6 130
Notes: 1. The tolerance of varistor voltage between 18V and 27V is more than 10%.
2. Varistor voltage≥1200V, structure diagram is F type.
3. Leakage Current (@83% of V1mA)：IR≤50μA (180K~680K) ; IR≤25μA (820K~182K)

Revision：30-Jun-16 3 / 12 www.brightking.com
 14Φ SERIES
Electrical Ratings

Items Test Condition/Description Requirement

The voltage between two terminals with the specified measuring

Varistor Voltage
current 1mA.DC applied is called Vb.

Maximum Allowable The recommended maximum sine wave voltage (RMS) or the
Voltage Maximum DC voltage can be applied continuously.

The maximum voltage between two terminals with the specification

standard impulse current.
Applied waveform: 8/20μs

Maximum Clamping
Voltage
To meet the
Specified value

The maximum average power that can be applied within the

Rated Wattage
specified ambient temperature.

The maximum energy within the varistor voltage change of ±10%

Energy
when one impulse of 10/1000μs or 2ms is applied.

Withstanding Surge The maximum current within the varistor voltage change of ±10%
Current with the standard impulse current (8/20μs) applied one time.

Varistor Voltage
≤0.05%/℃
Temp. Coefficient

The change of Vb shall be measured after the impulse listed below

which is applied 10,000 times continuously with the interval of ten
seconds at room temperature.
∆Vb
Surge Life 180K to 680K 75A (8/20μs) ≤ ±10%
Vb
14Φ series
820K to 182K 150A (8/20μs)

Revision：30-Jun-16 4 / 12 www.brightking.com
 14Φ SERIES
Soldering Recommendation

Wave Lead Free Soldering Recommendation

300
Soldering
Preheating Maximum Wave 265℃
Cooling
250

200

150

100

50

0
0 0.5 1 1.5 2 2.5 3 3.5 4

Time (minutes)

Item Conditions
Peak Temperature 265℃
Dipping Time 10 seconds (max.)
Soldering 1 time

Recommendation Reworking Conditions with Soldering Iron

Item Conditions
Temperature of Soldering Iron-tip 360℃ (max.)
Soldering Time 3 seconds (max.)
Distance from Varistor 2mm (min.)

Revision：30-Jun-16 5 / 12 www.brightking.com
 14Φ SERIES
Mechanical Characteristics

Items Test conditions / Methods Specifications

Gradually applying the force specified and keeping the unit
fixed for 10±1 sec.
Tensile Strength No visible damage
of Terminals |∆V1mA/V1mA |≤5%

Hold specimen and apply the force specified below to each

lead. Bend the specimen to 90°, then return to the original
position. Repeat the procedure in the opposite direction.
Bending Strength No visible damage
of Terminals |∆V1mA/V1mA |≤5%

Frequency range: 10~55 Hz

No visible damage
Vibration Amplitude: 0.75mm or 98m/s2
|∆V1mA/V1mA |≤5%
Direction: 3 mutually perpendicular directions, 2hrs each.
At least 95% of terminal
Solder Temp: 245±5℃
Solder ability electrode is covered by
Dipping Time: 2±0.5 sec
new solder
Resistance to Solder Temp: 260±5℃ No visible damage
Soldering Heat Dipping Time: 10±1 sec |∆V1mA/V1mA |≤10%

Reliability

Items Test conditions / Methods Specifications

High Temperature Ambient Temp: 125±2℃
|∆V1mA/V1mA |≤5%
Storage Duration: 1000hrs
Low Temperature Ambient Temp: -40±2℃
|∆V1mA/V1mA |≤5%
Storage Duration: 1000hrs
Ambient Temp: 40±2℃, 90~95% R.H.
Humidity |∆V1mA/V1mA |≤5%
Duration: 1000hrs

The conditions shown below shall be repeated 5 cycles

Step Temperature (℃) Period (minutes)
1 -40±3 30±3 No visible damage
Temperature Cycle 2 Room temperature 15±3 |∆V1mA/V1mA |≤5%
3 125±3 30±3
4 Room temperature 15±3

High Temperature Ambient Temp: 85±2℃ Duration: 1000hrs

|∆V1mA/V1mA|≤10%
Load Load: Max. Allowable Voltage In AC eara.
Ambient Temp: 40±2℃, 90~95% R.H. No visible damage
Damp Heat Load
Duration: 1000hrs Load: Max. Allowable Voltage |∆V1mA/V1mA |≤10%

Voltage Proof Metal balls method, 2500Vac 1 min. No visible damage

Revision：30-Jun-16 6 / 12 www.brightking.com
 14Φ SERIES
Maximum Surge Current Derating Curve

180KD14 to 680KD14 820KD14 to 751KD14

10000 10000
1
2

1000 1 1000 10
2 102
10 103
1023 104
100 104 100 105
10
105 106
106
10 10

1 1

0.1 0.1
10 100 1000 10000 10 100 1000 10000
Td (μs) Td (μs)

Revision：30-Jun-16 7 / 12 www.brightking.com
 14Φ SERIES
Maximum Leakage Current and Maximum Clamping Voltage Curve

180KD14 to 680KD14
1000

Maximum Clamping Voltage

680KD14
Maximum Leakage Current 560KD14
470KD14
390KD14
330KD14
100 270KD14
220KD14
Voltage (V)

180KD14

10

1
10-6 10
-5
10
-4
10
-3
10
-2
10
-1
1 10
2
10 10
3 4
10
Current (A)

820KD14 to 471KD14
10000

Maximum Clamping Voltage

Maximum Leakage Current 471KD14

431KD14
391KD14
361KD14
1000 331KD14
301KD14
Voltage (V)

271KD14
241KD14
221KD14
201KD14
181KD14
151KD14
121KD14
100 101KD14
820KD14

10
10-6 10
-5 -4
10
-3
10
-2
10 10
-1
1 10
2
10
3
10 10
4
10
5

Current (A)

Revision：30-Jun-16 8 / 12 www.brightking.com
 14Φ SERIES
Maximum Leakage Current and Maximum Clamping Voltage Curve

 
511KD14 to 182KD14
10000
Maximum Clamping Voltage 182KD14
162KD14
142KD14
Maximum Leakage Current 122KD14
112KD14
102KD14
911KD14
821KD14
781KD14
Voltage (V)

751KD14
681KD14
621KD14
1000 561KD14
511KD14

100
10-6 10
-5 -4
10
-3
10
-2
10 10
-1
1 10
2
10 10
3
10
4
10
5

Current (A)

180KD14J to 680KD14J
1000

Maximum Clamping Voltage

680KD14J
Maximum Leakage Current 560KD14J
470KD14J
390KD14J
330KD14J
100 270KD14J
220KD14J
Voltage (V)

180KD14J

10

1
10-6 10
-5
10
-4 -3
10
-2
10 10
-1
1 10
2
10 10
3
10
4

Current (A)

Revision：30-Jun-16 9 / 12 www.brightking.com
 14Φ SERIES
Maximum Leakage Current and Maximum Clamping Voltage Curve

820KD14J to 751KD14J
10000

751KD14J
Maximum Clamping Voltage
681KD14J
621KD14J
561KD14J
Maximum Leakage Current 511KD14J
471KD14J
431KD14J
1000 391KD14J
361KD14J
331KD14J
Voltage (V)

301KD14J
271KD14J
241KD14J
221KD14J
201KD14J
181KD14J
151KD14J
100 121KD14J
101KD14J
820KD14J

10
10-6 10-5 10-4 10-3 10-2 10-1 1 10 102 103 104 105
Current (A)

781KD14J to 182KD14J
10000

Maximum Clamping Voltage 182KD14J

162KD14J
142KD14J
Maximum Leakage Current 122KD14J
112KD14J
102KD14J
911KD14J
821KD14J
Voltage (V)

781KD14J

1000

100
10-6 10
-5
10
-4
10
-3
10
-2
10
-1
1 10
2
10
3
10 10
4 5
10
Current (A)

Revision：30-Jun-16 10 / 12 www.brightking.com
 14Φ SERIES
Marking Code

① Brightking Logo
② Varistor Voltage
③ UL Accreditation Logo
① ④ CSA Accreditation Logo
XXXKDXXX
② ⑥ ⑤ VDE Accreditation Logo
⑦
③ XXX H
⑧ ⑥“J”is High Surge Code, no“J”is Standard Surge
④
⑤ ⑨ ⑦ Disk Size
Y VDE X
⑩ ⑧“H”is Halogen Free Code, no“H”is Halogen
⑨ Date Code
⑩ Product Line Code (“Y”may be A thru Z or blank)

Taping Dimensions

Symbol Dimensions (mm)

P 25.4±1.0

P0 12.7±1.0

P1 8.95±0.7

P2 12.7±1.3

F 7.5±0.8

h 0±4

W 18.0±1.0

W0 12.0±1.0
W0
W

W1 9.0±0.5

W2 3.0max

H 20.0±2.0

I 1.0max

D0 4.0±0.2

t 0.6±0.3

B 40max

Revision：30-Jun-16 11 / 12 www.brightking.com
 14Φ SERIES
Quantity

Packaging Dimensions (Unit: mm) Quantity

Bulk 400pcs/bag
2bags/box
(180K~331K)
300pcs/bag
2bags/box
(361K~621K)
250pcs/bag
2bags/box
(681K~112K)
150pcs/bag
2bags/box
(122K~182K)
Tape & Box
750pcs/box
(180K~331K)

500pcs/box
(361K~621K)

400pcs/box
(681K~751K)

Tape & Reel

1000pcs/reel
(180K~331K)

750pcs/reel
(361K~621K)

500pcs/reel
(681K~751K)

Revision：30-Jun-16 12 / 12 www.brightking.com