Scribd
Upload
51 views7 pages

Pre-Test 1 BFC10403 Mekanik Bendalir

This 3-page document contains a pre-test for a Fluid Mechanics course taken at Universiti Tun Hussein Onn Malaysia. The pre-test has two questions worth 25 marks each, for a total of 50 marks. Question 1 has three parts asking students to (a) derive dimensional representations of fluid properties, (b) determine density, weight density, and specific gravity of oil, and (c) calculate pressure at a point in a water flow system. Question 2 has three parts asking students to (a) define different types of pressure, (b) calculate absolute pressure at a given depth in a freshwater lake, and (c) determine the mass of a floating circular pontoon. Diagrams are provided

Uploaded by

amar aiman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views7 pages

Pre-Test 1 BFC10403 Mekanik Bendalir

This 3-page document contains a pre-test for a Fluid Mechanics course taken at Universiti Tun Hussein Onn Malaysia. The pre-test has two questions worth 25 marks each, for a total of 50 marks. Question 1 has three parts asking students to (a) derive dimensional representations of fluid properties, (b) determine density, weight density, and specific gravity of oil, and (c) calculate pressure at a point in a water flow system. Question 2 has three parts asking students to (a) define different types of pressure, (b) calculate absolute pressure at a given depth in a freshwater lake, and (c) determine the mass of a floating circular pontoon. Diagrams are provided

Uploaded by

amar aiman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Name :………………………………………. Matrix :………………...

Lecturer Name :…………………………… Section :………………...

UNIVERSITI TUN HUSSEIN ONN MALAYSIA

Pre-Test
SEMESTER 2
SESSION 2017/2018

COURSE NAME : FLUID MECHANICS

COURSE CODE : BFC 10403

PROGRAMME CODE : BFF

EXAMINATION DATE : APRIL

DURATION : 1 HOUR 30 MINUTES

INSTRUCTIONS : ANSWER ALL QUESTIONS

QUESTIONS MARKS
Q1 / 25
Q2 / 25
TOTAL

THIS PAPER CONSISTS OF THREE (3) PAGES

CONFIDENTIAL
BFC 10403

Q1 (a) Derive the dimensional representation for the following fluid properties:
(i) mass density
(ii) dynamic viscosity
(iii) pressure
(iv) kinematic viscosity
(8 marks)

(b) Determine the weight density, mass density, and specific gravity if 5 liter of oil
weights 38 N.
(6 marks)

(c) Pressure gauge Y is to measure the pressure at point X in water flow as shown
in FIGURE Q1(c). If the pressure at Y is 85 kPa, determine the pressure at X,
in kPa and mmHg. Assume all fluids are at 20 oC ( mercury = 133 kN/m3; oil =
8900 N/m3)
(11 marks)

(c)
Q2 (a) Define the atmosphere pressure, gauge pressure and absolute pressure. Explain
your answers with the aid of diagrams.
(6 marks)

(b) Tasik Merdeka, a freshwater lake near Bukit Pasir, Batu Pahat, has maximum
depth of 20 m, and the mean atmospheric pressure is 90 kPa. Determine the
absolute pressure in kN/m2 at this maximum depth.
(9 marks)

(c)
The circular pontoon with 2 m of diameter and 80 cm of thickness floats in
position as shown in Figure Q2(c). Determine the mass of pontoon in metric tons
unit. (Neglect the air above). (10 marks)

2
BFC 10403

PRE-TEST
SEMESTER / SESSION : SEM II / 2017/2018 PROGRAMME : 1 BFF
COURSE NAME : FLUID MECHANICS COURSE CODE : BFC 10403

(1 atm = 760 mmHg = 101325 Pa)

Figure Q1(c)

Figure Q2(c)

You might also like