Mullen Woodworks - Free Build Plans
Pergola
Hammock
Difficulty Level: Beginner
Materials Required Quantity
4x4x8 4
2x4x12 7
2x6x12 8
2.5” Screws (50 pack) 1
O Brackets 2
Washer 2
Nut 2
Mullen Woodworks - Free Build Plans
Cut List
Quantity Size (inches) Tools Required
A. 4x4 4 96
Circular saw (recommended Miter
B. 2x6 4 72 Saw)
C. 2x4 2 24.5 Drill/Driver
D. 2x6 2 144
E. 2x4 22 44
Angle cuts for boards B and E are
F. 2x6 2 100
50 degrees. Angle cuts for Miter
G. 2x6 2 24.5 supports are 45 degree cuts.
H. 2x6 12 24
Mullen Woodworks - Free Build Plans
Cut List
D. F.
A.
B. E.
G. H.
C.
24.5” 24”
24.5” 44”
72”
96”
100”
144”
Mullen Woodworks - Free Build Plans
Disclaimer
Use proper safety measures at all
times. Safety glasses and gloves
are recommended.
Solo Stove and Mullen
Woodworks are not liable
for any injuries during the
building process or during
use of the product.
Mullen Woodworks - Free Build Plans
Building
Process
Step 1: Starting the base
- Take four B boards and cut 50 degree
angles on the ends.
- Attach A boards to B boards using three
2.5 screws on each joint.
23.75”
23.75”
Mullen Woodworks - Free Build Plans
Step 2: Building the Base
- Attach F boards to B boards with
two 2.5” screws in each joint.
- F boards should be aligned just
outside the A boards.
Mullen Woodworks - Free Build Plans
Step 3: Building the base
- Attach the next two B boards to the A
boards using three 2.5” screws at each
joint.
Mullen Woodworks - Free Build Plans
Step 4 - Attach top support
- Attach C boards to the top of the A boards.
- Use two 2.5” screws into each joint.
Mullen Woodworks - Free Build Plans
Step 6 - Attach Cross Beams
- Attach D boards to the frame. Make D
boards flush with top of frame.
- Use three 2.5” screws to attach each joint
of the D boards.
- Each D board should hang past the base
By 18”.
Mullen Woodworks - Free Build Plans
Step 7 - Attach top trellis
boards
— Attach E boards to the top of the D
boards. Use two 2.5” screws into each
board.
— Use a 2x4 scrap to gap all the D boards
apart.
Mullen Woodworks - Free Build Plans
Step 8 - Attach miter
supports
- Attach all 12 H boards to the structure.
- Use two 2.5” screws per joint (four
screws per H board.
- See Youtube video on the Solo Stove
Channel for more detail!
Mullen Woodworks - Free Build Plans
Step 8 - Attach Hammock
Support
- Attach both G boards to the structure.
- Use two 2.5” screws per joint (four
screws per G board.
- Hang 48” off the ground or test height of
hammock before attaching support.
- Attach O Rings by drilling hole in G
boards. Use washers and nuts to secure.
- See Youtube video on the Solo Stove
Channel for more detail!
Mullen Woodworks - Free Build Plans
Disclaimer
Use proper safety measures at all
times. Safety glasses and gloves
are recommended.
Solo Stove and Mullen
Woodworks are not liable
for any injuries during the
building process or during
use of the product.
Mullen Woodworks - Free Build Plans
Pergola
Hammock
Visit our YouTube for in-
depth video and tutorial!
Make sure you send us your
pictures and tag us in your
social media posts!
