DATASHEET
8” KPAK® Plus Modules
High Productivity Zero Bypass Ultrafiltration Modules for Electrocoat Paint
PRODUCT DESCRIPTION
Membrane Chemistry: PVDF
Membrane Type: HFM -183 (Positive Charge)
Construction: Spiral wound element with integrated PVC housing
Seal: EPDM
NOMINAL SPECIFICATIONS
Feed Spacer Membrane Area
Part Number Model
mil (mm) ft2 (m2)
0750775 KPAK PLUS 8638-M183-LPP 30 (0.8) 329 (30.6)
0750788 KPAK PLUS 8638-M183-VPP 46 (1.2) 255 (23.7)
OPERATING AND DESIGN INFORMATION*
Maximum Inlet Pressure at Temperature: 80.0 psi @ 110 °F (5.5 bar @ 43 °C)
Maximum Inlet Pressure at Temperature: 64.0 psi @ 120 °F (4.4 bar @ 49 °C)
Minimum Outlet Pressure: 10.0 psi (0.70 bar)
Maximum Operating Temperature at Pressure: 125 °F @ 56 psi (51.6 °C @ 3.9 bar)
Maximum Permeate Side Back Pressure: 5.0 psi (0.34 bar)
Maximum Feed Side Pressure Drop: 35.0 psi @ 125º F (2.4 bar @ 51.6 º C)
Allowable pH – Continuous Exposure: 2.0 - 10.0 pH @ 125 °F (51.6 °C)
Allowable pH – Short Term Exposure: 1.5 - 10.5 pH @ 125 °F (51.6 °C)
*Koch Separation Solutions, Inc. must review operating and cleaning conditions for all new plants and any changes to existing plants
FEED FLOW VS.PRESSURE DROP (TYPICAL)*
Pressure Drop Circulation Flow (30 mil) Circulation Flow (46 mil)
psi bar gpm m3/hr gpm m3/hr
25 1.7 62 14.1 97 21.6
30 2.1 70 15.9 109 24.3
35 2.4 75 17.0 117 26.1
*Data are based on water @ 77 º F and a specific gravity of 1.0. Circulation rates exhibit variances of + 15%
NOMINAL DIMENSIONS
Element Length: 39.25 in (997.0 mm)
Element O.D.: 8.63 in (219.2 mm)
Permeate Tube I.D.: 1.3 in (33.0 mm)
Element Shipping Weight: 70 lbs (32 kg)
Element Working Weight: 90 lbs (40.82 kg)
8” KPAK® Plus Modules | page 2
8” KPAK® PLUS SPIRAL MODULE ASSEMBLY
Permeate
J
C
Paint
Return
G
8” KPAK® PLUS Element
A
B
D
Replacement 8’’ Seal Kit (EPDM)
Metric 0235043
Imperial 2” Port 0235043
1
Imperial 1 /2” Port 0235045
E
Paint
Feed Cartridge Support Kit
Metric N/A
K Imperial 0235042 (Hardware included)
MODEL A B C D E F G J K
Metric (mm) 1,165 1,086 190.5 219 28 264 28 1” MBSPT G 1/2” FBSP
Imperial (inch) 45 7/8 42 3/4 7 1/2 8 5/8 N/A 10 3/8 1¼ 1” MNPT N/A
8” Imperial 8” Imperial
8” Metric 8” Imperial 2” Port 1½” Port
Kit Systems Kit Retrofit Kit Retrofit Kit
50502022 0211860 0211851 0211858
1022033 1005176 1005176 1005176
1006103 1006103 1006103 1006103
1005183 1005183 1005183 1005183
1001123 1001123 1001123 1001123
0151258 0151258 0151258 1004333
1022034 WITH 1005175 1005175
DRAIN PORT
1005175
4000129
0235042 0235042
The information contained in this publication is believed to be accurate and reliable, but is not to be construed as implying any warranty or guarantee of
performance. We assume no responsibility, obligation or liability for results obtained or damages incurred through the application of the information contained
herein. Refer to Standard Terms and Conditions of Sale and Performance Warranty documentation for additional information
Koch Separation Solutions, Inc. 850 Main Street, Wilmington, MA 01887
Main: +1-978-694-7000 • Fax: +1-978-657-5208 • Toll Free: +1-888-677-5624
For complete contact information and listing of our global locations, visit www.kochseparation.com
©2020 Koch Separation Solutions, Inc. All rights reserved worldwide. For related trademark information, visit www.kochseparation.com/legal.
07/19 Rev 19-1
