Technical data sheet NR24A-SR
Modulating rotary actuator for ball valves
• Torque motor 10 Nm
• Nominal voltage AC/DC 24 V
• Control modulating 2...10 V
• Position feedback 2...10 V
Technical data
Electrical data Nominal voltage AC/DC 24 V
Nominal voltage frequency 50/60 Hz
Nominal voltage range AC 19.2...28.8 V / DC 19.2...28.8 V
Power consumption in operation 2.5 W
Power consumption in rest position 0.4 W
Power consumption for wire sizing 5 VA
Connection supply / control Cable 1 m, 4 x 0.75 mm²
Parallel operation Yes (note the performance data)
Functional data Torque motor 10 Nm
Operating range Y 2...10 V
Input Impedance 100 kΩ
Position feedback U 2...10 V
Position feedback U note Max. 1 mA
Position accuracy ±5%
Manual override with push-button, can be locked
Running time motor 90 s / 90°
Sound power level, motor 35 dB(A)
Position indication Mechanically, pluggable
Safety data Protection class IEC/EN III, Safety Extra-Low Voltage (SELV)
Power source UL Class 2 Supply
Degree of protection IEC/EN IP54
Degree of protection NEMA/UL NEMA 2
Enclosure UL Enclosure Type 2
EMC CE according to 2014/30/EU
Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
Certification UL cULus according to UL60730-1A, UL60730-2-14
and CAN/CSA E60730-1
The UL marking on the actuator depends on
the production site, the device is UL-compliant
in any case
Mode of operation Type 1
Rated impulse voltage supply / control 0.8 kV
Pollution degree 3
Ambient temperature -30...50°C
Storage temperature -40...80°C
Ambient humidity Max. 95% RH, non-condensing
Servicing maintenance-free
Weight Weight 0.75 kg
www.belimo.com NR24A-SR • en-gb • 2021-04-23 • Subject to change 1/3
Technical data sheet NR24A-SR
Safety notes
• This device has been designed for use in stationary heating, ventilation and air-conditioning
systems and must not be used outside the specified field of application, especially in aircraft or
in any other airborne means of transport.
• Outdoor application: only possible in case that no (sea) water, snow, ice, insolation or
aggressive gases interfere directly with the device and that it is ensured that the ambient
conditions remain within the thresholds according to the data sheet at any time.
• Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied during installation.
• The switch for changing the direction of rotation may only be operated by authorised
specialists. The direction of rotation must not in particular be reversed in a frost protection
circuit.
• The device may only be opened at the manufacturer's site. It does not contain any parts that
can be replaced or repaired by the user.
• Cables must not be removed from the device.
• The device contains electrical and electronic components and must not be disposed of as
household refuse. All locally valid regulations and requirements must be observed.
Product features
Mode of operation The actuator is connected with a standard modulating signal of 0...10 V and drives to the
position defined by the positioning signal. Measuring voltage U serves for the electrical display
of the valve position 0.5...100% and as slave control signal for other actuators.
Simple direct mounting Straightforward direct mounting on the ball valve with only one central screw. The assembly
tool is integrated in the plug-in position indication. The mounting orientation in relation to the
ball valve can be selected in 90° steps.
Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is
pressed or remains locked).
Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.
High functional reliability The actuator is overload protected, requires no limit switches and automatically stops when the
end stop is reached.
Accessories
Electrical accessories Description Type
Feedback potentiometer 10 kΩ add-on P10000A
Feedback potentiometer 1 kΩ add-on P1000A
Feedback potentiometer 140 Ω add-on P140A
Feedback potentiometer 200 Ω add-on P200A
Feedback potentiometer 2.8 kΩ add-on P2800A
Feedback potentiometer 5 kΩ add-on P5000A
Feedback potentiometer 500 Ω add-on P500A
Auxiliary switch 1 x SPDT add-on S1A
Auxiliary switch 2 x SPDT add-on S2A
Electrical installation
Supply from isolating transformer.
Parallel connection of other actuators possible. Observe the performance data.
Direction of rotation switch is covered. Factory setting: Direction of rotation Y2.
www.belimo.com NR24A-SR • en-gb • 2021-04-23 • Subject to change 2/3
Technical data sheet NR24A-SR
Wiring diagrams
AC/DC 24 V, modulating Override control (frost protection circuit)
Cable colours:
1 = black
2 = red
3 = white
5 = orange
Dimensions
Dimensional drawings
Further documentation
• The complete product range for water applications
• Data sheets for ball valves
• Installation instructions for actuators and/or ball valves
• General notes for project planning
www.belimo.com NR24A-SR • en-gb • 2021-04-23 • Subject to change 3/3
