User Manual

S-24GE-M-2UG-400W-AI-VLAN
24 Port Gigabit Layer 2 Managed AI PoE Switch
Installation manual introduction

The Product installation manual mainly describes S-24GE-M-2UG-400W-AI-VLAN AI PoE

switch hardware features, installation methods, and precautions during the installation.

This manual includes the following chapters:

Chapter 1: Product Introduction. Briefly describes the basic features of the switch and

the appearance details.

Chapter 2: Product Installation. Guide the switch hardware installation methods and

precautions.

Chapter 3: Hardware Connections. Guide the connection between switches and other
devices and precautions.

Chapter 4: Technical Specifications.

NOTE: To avoid potential device damage and personal injury, read the related
information in this manual before installing the device.

Agreement

The term "switch" mentioned in this manual, unless otherwise specified, refers to 24-
port full Gigabit Managed AI PoE switch, hereinafter referred to as S-24GE-M-2UG-

400W-AI-VLAN.

Some pictures for the schematic, the product itself and pictures may be different.
 The contents of this document may be updated from time to time due to product

version upgrades or other reasons. Unless otherwise agreed, this document is

provided as a guide only, and all statements, information and recommendations in

this document do not constitute any form of warranty.

This icon indicates the items to be cautioned in the operation. If the operation is

wrong, the equipment may be damaged and other adverse consequences.

Chapter 1 Product Introduction

1.1 Product Introduction

S-24GE-M-2UG-400W-AI-VLAN is Layer 2 Managed AI PoE switch designed for

security transmission and WIFI coverage. It can satisfy the POE power supply
requirements of WIFI AP, IP camera, WIFI bridge, IP phone and other types of
equipment. The product adopts a new generation of high-performance
hardware and software platform to provide flexible, cost-effective access and

Gigabit uplink ports, complete security protection mechanism, complete

ACL/QoS policy and rich VLAN functions, easy to manage and maintain, and

satisfy users’ requirements for network equipment easy to manage, high

security and low-cost , it is applicable for network access, aggregation, and

core application scenarios of campus, hotel, and enterprise campus.

PoE (Power over Ethernet) refers to the power over Ethernet technology. It

refers to the transmission of data signals to some IP-based terminals (such as

IP phones, wireless access point APs, network cameras, etc.) and also provide
 DC power supply technology. These devices that accept DC power supply are
called powered devices (PD, Powered Device)

1.2 Packing List

Open the package and check the list below

Commodity Quantity Description

PoE switch 1 pc No
Power cord 1 pc Optional
Bracket 2 pcs Fixed on rack mount
User Manual 1 pc Guide users to install switch

1.3 Appearance

 Front Pannel

Indicators, RJ45 port, shortcut buttons, RST button, SFP port, CONSOLE
port, as shown in Figure as below:
 Indicators
S-24GE-M-2UG-400W-AI-VLAN The indicator working status is shown as
following table:

Work
Indicator Title color Description
status
Solid Power is normal
Power No power, the power switch is
PWR red
indicator off not turned on, power supply is
abnormal
The corresponding RJ45 port is
solid connected to the powered device
and the power supply is normal
POE power
POE yellow The corresponding RJ45 port is
indicator
not connected to the powered
off
device or the power supply is
abnormal
Connection Blinking A valid link is established
LINK/ACT green
indicator off An invalid link is established
Blinking System is functioning properly
System
SYS green System is functioning improperly
indicator off
Software is damaged

 DIP switch function

AI QOS: Improve video data processing capabilities and improve the

monitoring of Caton and Mosaic phenomena in the network.

EXTEND: 1-8 port rate down to 10Mbps, but the transmission distance up to

250 meters.

VLAN: Isolating ports 1-24 from each other, suppress network storms

effectively and improve network performance.

AI Power Supply: Detect PD, power failure and restart dead equipment.
 RJ45 Port
S-24GE-M-2UG-400W-AI-VLAN supports 24 10/100/1000 Mbps ports, all
supporting IEEE802.3af and IEEE802.3at standard POE power supply.

 SFP Port
S-24GE-M-2UG-400W-AI-VLAN provides 2 Gigabit SFP optical module
expansion slots (25, 26) for plugging Gigabit SFP modules

 RST Button

When the switch is powered on, press the button with needle and release the

device to enter the restart state. When the SYS light is turned on again, the

device restarts. When the switch is powered on, press the button for 5

seconds or more to release the button device to enter the reset status, when

SYS lights up again, the device resets successfully.。

 Console Port

The Console port is used for connecting to the serial port of a computer or

other terminal to manage or configure the switch.。

 Back Panel

Includes: power socket, ground

  Power socket

The power supply to the switch S-24GE-M-2UG-400W-AI-VLAN should be 100-

240V~ 50/60Hz AC power.

 Ground terminal

Please use a wire to ground so that preventing lightning strikes, to avoid

product lightning strikes and extend the life of the product.

Chapter 2 Product Installation

2.1 Installation Precautions

Note: To avoid damage to the equipment and personal injury caused by

improper use, please observe the following precautions.

 Installation safety precautions

 The power is kept off during the installation process. Wear an ESD-
preventive wrist strap and ensure that the ESD-preventive wrist
strap is in good touch with the skin to avoid potential safety hazards.
  The switch can work normally under the correct power supply.
Please confirm that the power supply voltage matches the voltage
indicated by the switch.
 Before powering on the switch, please make sure that the power
circuit is not overloaded, so as not to affect the normal operation of
the switch and even cause unnecessary damage.
 To avoid the risk of electric shock, do not open the case while the
switch is working, even if it is not charged, do not open it by yourself.
Before cleaning the switch, pull out the power plug of the switch.

Do not wipe with a moist fabric. Do not use liquid to clean.

 Temperature and humidity

In order to ensure long-term stable operation of the switch and prolong

its service life, please maintain a certain temperature and humidity in

the environment. Excessively high or too low ambient humidity may
cause leakage, deformation or even corrosion of metal parts. If the
temperature is too high, the aging process of the insulation material will

be accelerated, which will seriously affect the service life of the

equipment. Normal operation and storage temperature / humidity of

this series of switches as below:

Environmental Temperature Relative humidity

Description
Working 0℃~40℃ 10%～90% RH Non-condensing
Environment
Storage -40℃～70℃ 5%～90% RH Non-condensing
Environment

 Altitude
 Products with this mark are only suitable for safe use in areas below
2000m.

 Dust-proof
Dust falling on the surface of the switch can cause electrostatic
adsorption and poor contact of the metal contacts. Although the device

itself has made certain measures in anti-static, when the static electricity
exceeds a certain strength, it will still cause fatal damage to the

electronic components on the internal circuit board. To avoid the static

electricity affecting the normal operation of the device, please pay

attention to the following:

Regular dust removal to keep indoor air clean, Confirm that the

equipment is well grounded to ensure the smooth transfer of static

electricity.

 Electromagnetic interference

Electromagnetic interference will affect the internal components such as

capacitance, inductance and other electronic components by capacitive

coupling, inductive coupling, impedance coupling, etc. To reduce the

adverse effects caused by electromagnetic interference, please pay

attention to the following:

The power supply system takes necessary measures against grid
interference.
The switch should be away from high-frequency, high-power, high-
current equipment, such as wireless transmitters.

Take electromagnetic shielding measures when necessary.

  Lightning protection needs
When a lightning strike occurs, a strong current is generated in an

instant, and the air in the discharge path is instantaneously heated to

20,000 degrees Celsius, and an instantaneous large current is enough to

cause fatal damage to the electronic device. For better lightning

protection, please note the following:

Confirm that the rack is in good contact with the ground.

Make sure the power outlet is in good contact with the ground.

Reasonable wiring to avoid internal induction lightning.

Signal lightning protector is recommended for outdoor wiring.

 Installation station requirements

Regardless of whether the switch is installed in a rack or on another
horizontal workbench, be aware of the following:
Make sure the rack or workbench is stable, strong, and can withstand at
least 5.5Kg weight.
Make sure the rack has a good cooling system, or maintain good indoor
ventilation.
Make sure the rack is well grounded, the power outlet and switch are
within 1.5 meters.

 Prepare tools for installation

You may need to use a screwdriver during installation, electrostatic

wrist strap, fiber optic cable and other tools to prepare yourself

2.2 Product installation

 19-inch standard rack installation

S-24GE-M-2UG-400W-AI-VLAN is designed according to the standard 19-inch

rack size, you can easily install to the rack, the specific installation steps as

follows:

1) Check rack grounding and stability.

2) Install the two L-brackets in the accessory on each side of the switch

panel and secure with the screws provided in the accessory.

3) place the switch in an appropriate place in the rack and be supported by

the bracket. Screw the L-shaped bracket to the guide groove fixed on

both ends of the rack to ensure that the switch is stable and horizontally

installed on the rack.

Note:
Good grounding rack is anti-static equipment, anti-leakage, lightning
protection, anti-jamming important guarantee, so to ensure that the

rack ground wire properly installed;

Installation equipment within the rack from the bottom up, to avoid

overload installation;
Avoid placing other heavy objects on switch to avoid accidents;

Ensure heat dissipation and air circulation.

Chapter 3 Hardware Connection

3.1 RJ45 port connection

Connect the RJ45 port of the switch and the corresponding network
device via cables, the POE power supply function of the switch is default

enabled on the downlink port of the switch, which can be used for
IEEE802.3af or IEEE802.3at standards powered devices such as APs,

bridges, and network cameras.

Note:

When the switch connected workstations, servers, routers or other

Ethernet devices the cable length should be within 100 meters,
 The Auto-MDI / MDIX Ethernet interface is enabled by default.
Category 5 the standard network cable or crossover cable can be used for

Ethernet connection.
Do not connect the RJ45 port to the phone line.

3.2 SFP Port connection

S-24GE-M-2UG-400W-AI-VLAN SFP port only support Gigabit fiber module.

Recommended use of standard SFP module products

The process of installing a fiber module on a switch is as follows:

First, grasp the optic fiber module from the side, insert it smoothly along
the SFP port slot until the optic fiber module and switch are in close

contact.

Second, confirm the Rx and Tx ports of the fiber module when connecting,

insert one end of the fiber into the Rx and Tx ports correspondingly,
ensure that the Tx and Rx ends of the interface are connected correctly

and the other end of the fiber is connected to another device.

Third, please check the corresponding indicator light status after power on.
If the light blinking that the link is properly connected, if the light is off ,

the link is failure, please check the line to confirm that the corresponding
equipment is enabled.

Note:

Does not allow excessive bending fiber, the radius of curvature should not
 be less than 10cm.
Ensure the cleanliness of the fiber surface.
Please do not look directly into the optical fiber connector with your eyes
as this may cause eye injury.

3.3 Check before power on

Check whether the outlet power supply meets the switch specifications.

Check the power, switches, racks and other equipment have been properly

grounded.

Check whether the switch and other network devices are connected

properly.

3.4 Device initialization

The switch automatically initializes when the power switch is turned on.

Indicator will appear the following situation:

After the power is turned on, the power indicator remains on, the other

indicator is off at this time.

After about 1 second, all lights except for the power light turn on for about

35 seconds and then turn off. when the SYS light goes flashing, the system

runs normally.

Port LEDs indicates the connection status of each port, indicating that the

switch has started to work normally.

3.5 Web Login

Step1、In the normal operation of the device, connect the computer to the
switch's RJ45 port by network cables

Step 2、 Manually changed the computer IP address to 192.168.254.X (X is 2 ~

254), subnet mask is 255.255.255.0

Step3、Open computer's browser, type 192.168.254.1 in the address box, hit

 the Enter key.

Step4、Enter the default username and password “admin” and then click
Login.

Step5、Entered the switch web management interface successfully when you

see picture as below, then you can start to configure the switch.
Chapter 4 Technical Specifications

4.1Hardware Specifications

Network IEEE 802.3i IEEE 802.3u IEEE 802.3x

standard IEEE 802.3ab IEEE 802.3af IEEE 802.3at
24 10/100/1000Mbps RJ45 port

Port 2 gigabit SFP

1 Console

24 10/100/1000Mbps RJ45 port support PoE+

PoE
Max 250W
 Single port max 46W

26 Link/Act LEDS
24 POE LEDs
LEDs
1 SYS LED
1 Power LED
Forwarding mode: store and forward
Bandwidth：52Gbps
Performance Packet forwarding rate：38.688Mpps
8K MAC address table

Lightning 6KV
protection
Input 100-240V/50-60Hz

Dimension 440mm×180mm×44mm
（L×W×H）

4.2 Software Specifications

IEEE 802.3:Ethernet Media Access Control (MAC) Protocol
IEEE 802.3i:10BASE-T Ethernet
IEEE 802.3u:100BASE-TX Fast Ethernet
IEEE 802.3ab:1000BASE-T Gigabit Ethernet
IEEE 802.3z:1000BASE-X Gigabit Ethernet (fiber)
IEEE 802.3ad:Standard method for performing link
Protocol aggregation
Standard IEEE 802.3x:flow control
IEEE 802.1p:LAN Layer 2 Qos/Cos protocol for traffic
priority (multicast filtering)
IEEE 802.1q:VLAN
IEEE 802.1d:STP Spanning tree
IEEE 802.1s:MSTP Spanning tree
IEEE 802.1w:RSTP Spanning tree
IEEE 802.3af
IEEE 802.3at
One key VLAN
One key CCTV(1-8 port 250meters PoE distance)
 Shortcut One key AI power supply
Function One key Q0S (Video priority)
DHCP Support DHCP Snooping
Support 4K VLAN

VLAN Support 802.1Q VLAN, MAC VLAN , IP VLAN

Voice VLAN
Comply the IEEE 802.1d standard
Support MAC address learning and aging automatically
MAC address
table Support static, dynamic, filter address table

Password protection

Support based on the port number, IP address, MAC

address restrictions on user access
Safety
Support HTTPS, SSL V3, TLS V1, SSH V1/V2

Support IP-MAC-PORT ternary binding

Support ARP protection, IP source protection, DoS

protection
Support DHCP Snooping, DHCP attack protection

Support 802.1X certificated, AAA

Support port security, port isolation
Support CPU protection

Support POE power limit

POE
Support POE chip status view
management
Support setting PoE port priority

Support setting PoE power supply time period

Access control Support L2 (Layer 2) ~ L4 (Layer 4) packet filtering

 (ACL) Support port mirroring, port redirection, flow rate limiting,
QoS re-marking
Quality of Support 8 port queue
Service (QoS) Support port priority, 802.1p priority, DSCP priority

Support SP, RR, WR, WFQ Priority scheduling algorithm

Support STP(IEEE 802.1d)，RSTP(IEEE 802.1w) and

Spanning Tree
MSTP(IEEE 802.1s) protocol

Support loop protection, root bridge protection, TC

protection, BPDU protection, BPDU filtering

Support IGMP v1/v2 Snooping

Multicast
Support fast leave mechanism

Support multicast VLAN

Supports multicast filtering, packet statistics, and unknown

multicast discards.
Support multicast suppression
Storm
suppression Support broadcast suppression

Support unknown unicast suppression

Support static aggregation

Link Support dynamic aggregation

aggregation
Support IP, MAC, and hybrid load balancing modes

Supports up to 32 aggregation groups

Support IPv6 Ping, IPv6 Tracert, IPv6 Telnet

IPv6
Support IPv6 SSH , IPv6 SSL

Support WEB network management (HTTP, HTTPS, SSL V3)

 Support CLI (Telnet, SSH V1/V2, local serial port)

Support SNMP V1/V2/V3

Management Support LLDP, RMON
and
maintenance Support ARP protection, IP source protection, DoS
protection
Support CPU monitoring, memory monitoring
Support system log, grading warning

Support Ping, Tracert detection, cable detection