13/08/2019 What is SCADA?

SCADA Systems for Electrical Distribution

Communication Control Electrical Design Power System

SCADA Systems for Electrical

Distribution
Electrical Technology 2  5 minutes read

SCADA Systems for Electrical Distribution

Table of Contents [Hide]

1 What is SCADA?
2 Components of Typical SCADA System
3 Remote Terminal Units (RTUs)
4 Master Terminal Units (MTUs)
5 Communications System
6 Operator Workstations
7 Automation of Electrical Distribution System
8 Substation Control using SCADA
9 Feeder Control using SCADA
10 End User Load Control Automation by SCADA
11 Advantages of Implementing SCADA systems for Electrical
Distribution

Nowadays, computer control is one of the most cost effective solutions

for improving reliability, optimum operation, intelligent control and
https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 1/12
13/08/2019 What is SCADA? SCADA Systems for Electrical Distribution

protection of a power system network. Having advanced data collection

capabilities, SCADA system plays a significant role in power system
operation.

Typically, at distribution side SCADA does more than simply collecting

data by automating entire distribution network and facilitating remote
monitoring, coordinate, control and operating distribution components
just like in Smart Grid System.

Before knowing distribution automation using SCADA, let us look at

what exactly SCADA is and its functioning and what they do in the
distribution system.

What is SCADA?
Supervisory Control and Data Acquisition or simply SCADA is one
of the solutions available for data acquisition, monitor and control
systems covering large geographical areas. It refers to the combination
of data acquisition and telemetry.

https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 2/12
13/08/2019 What is SCADA? SCADA Systems for Electrical Distribution

SCADA systems are mainly used for the implementation of monitoring

and control system of an equipment or a plant in several industries like
power plants, oil and gas refining, water and waste control,
telecommunications, etc.

In this system, measurements are made under field or process level in

a plant by number of remote terminal units and then data are
transferred to the SCADA central host computer so that more complete
process or manufacturing information can be provided remotely.

https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 3/12
13/08/2019 What is SCADA? SCADA Systems for Electrical Distribution

This system displays the received data on number of operator screens

and conveys back the necessary control actions to the remote terminal
units in process plant.

Also Read: Integration of Renewable Energy with Grid System

Components of Typical SCADA System

The major components in SCADA system are

Remote Terminal Units (RTUs)

RTU is the main component in SCADA system that has a direct
connection with various sensors, meters and actuators associated with
a control environment.

These RTUs are nothing but real-time programmable logic

controllers (PLCs) which are responsible for properly converting
remote station information to digital form for modem to transmit the
data and also converts the received signals from master unit in order to
control the process equipment through actuators and switchboxes.

Master Terminal Units (MTUs)

A central host servers or server is called Master Terminal Unit,
sometimes it is also called as SCADA center. It communicates with

https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 4/12
13/08/2019 What is SCADA? SCADA Systems for Electrical Distribution

several RTUs by performing reading and writing operations during

scheduled scanning. In addition, it performs control, alarming,
networking with other nodes, etc.

Communications System
The communication network transfers data among central host
computer servers and the field data interface devices & control units.
The medium of transfer can be cable, radio, telephone, satellite, etc. or
any combination of these.

Operator Workstations
These are the computer terminals consisting of standard HMI (Human
Machine Interface) software and are networked with a central host
computer. These workstations are operator terminals that request and
send the information to host client computer in order to monitor and
control the remote field parameters.

Also read: High Inrush Current in Capacitor Switching and Ways

to Prevent It.

Automation of Electrical Distribution System

Modern SCADA systems replace the manual labor to perform electrical
distribution tasks and manual processes in distribution systems with
automated equipments. SCADA maximizes the efficiency of power
distribution system by providing the features like real-time view into the
operations, data trending and logging, maintaining desired voltages,
currents and power factors, generating alarms, etc.

https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 5/12
13/08/2019 What is SCADA? SCADA Systems for Electrical Distribution

SCADA performs automatic monitoring, protecting and controlling of

various equipments in distribution systems with the use of Intelligent
Electronic Devices (or RTUs). It restores the power service during fault
condition and also maintains the desired operating conditions.

SCADA improves the reliability of supply by reducing duration of

outages and also gives the cost-effective operation of distribution
system. Therefore, distribution SCADA supervises the entire electrical
distribution system. The major functions of SCADA can be categorized
into following types.

Substation Control
Feeder Control
End User Load Control

Also read: Fault Current Limiter and Their Types

Substation Control using SCADA

In substation automation system, SCADA performs the operations like
bus voltage control, bus load balancing, circulating current control,
overload control, transformer fault protection, bus fault protection, etc.

SCADA system continuously monitors the status of various equipments

in substation and accordingly sends control signals to the remote

https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 6/12
13/08/2019 What is SCADA? SCADA Systems for Electrical Distribution

control equipments. Also, it collects the historical data of the substation

and generates the alarms in the event of electrical accidents or faults.

The above figure shows the typical SCADA based substation control
system. Various input/output (I/O) modules connected to the substation
equipment gathers the field parameters data, including status of
switches, circuit breakers, transformers, capacitors and batteries,
voltage and current magnitudes, etc. RTUs collect I/O data and
transfers to remote master unit via network interface modules.

The central control or master unit receives and logs the information,
displays on HMI and generate the control actions based on received

https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 7/12
13/08/2019 What is SCADA? SCADA Systems for Electrical Distribution

data. This central controller also responsible for generating trend

analysis, centralized alarming, and reporting.

The data historian, workstations, master terminal unit and

communications servers are connected by LAN at the control center. A
Wide Area Network (WAN) connection with standard protocol
communication is used to transfer the information between field sites
and central controller.

Thus, by implementing SCADA for substation control eventually

improves the reliability of the network and minimizes the downtime with
high speed transfer of measurements and control commands.

Also read: Why Nuclear Power is It The Last Option in Most Countries?

Feeder Control using SCADA

This automation includes feeder voltage or VAR control and feeder
automatic switching. Feeder voltage control performs voltage
regulation and capacitor placement operations while feeder switching
deals with remote switching of various feeders, detection of faults,
identifying fault location, isolating operation and restoration of service.

In this system, SCADA architecture continuously checks the faults

and their location by using wireless fault detector units deployed at
various feeding stations. In addition, it facilitates the remote circuit
switching and historical data collection of feeder parameters and their
status. The figure below illustrates feeder automation using SCADA.

https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 8/12
13/08/2019 What is SCADA? SCADA Systems for Electrical Distribution

In the above typical SCADA network, different feeders (underground

as well as overhead networks) are automated with modular and
integrated devices in order to decrease the number and duration of
outages. Underground and overhead fault detection devices provide
accurate information about transient and permanent faults so that at
the remote side preventive and corrective measures can be performed
in order to reduce the fault repeatability.

Ring main units and Remote Control Units (RTUs) of underground and
overhead network responsible for maintenance and operational duties
such as remote load switching, capacitor bank insertion and voltage
regulation. The entire network is connected with a communication
medium in order to facilitate remote energy management at the central
monitoring station.

Also read: Primary and Secondary or Backup protection in a Power

System

End User Load Control Automation by SCADA

This type of automation at user end side implements functions like
remote load control, automatic meter reading and billing generation,
etc. It provides the energy consumption by the large consumers and
appropriate pricing on demand or time slots wise. Also detects energy
meter tampering and theft and accordingly disconnects the remote
service. Once the problem is resolved, it reconnects the service.

https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 9/12
13/08/2019 What is SCADA? SCADA Systems for Electrical Distribution

The above figure shows a centralized meter data-management system

using SCADA. It is an easy and cost-effective solution for automating
the energy meter data for billing purpose.

In this, smart meters with a communication unit extract the energy

consumption information and made it available to a central control
room as well as local data storage unit. At the central control room,
AMR control unit automatically retrieves, stores and converts all
meter data.

Modems or communication devices at each meter provide secure two-

way communication between central control and monitoring room and
remote sites.

Also read: Comparison between AC and DC Transmission System

Advantages of Implementing SCADA systems for

Electrical Distribution
Due to timely recognition of faults, equipment damage can be
avoided
Continuous monitoring and control of distribution network is
performed from remote locations
Saves labor cost by eliminating manual operation of distribution
equipment
Reduce the outage time by a system-wide monitoring and
generating alarms so as to address problems quickly
Improves the continuity of service by restoring service after the
occurrence of faults (temporary)
Automatically improves the voltage profile by power factor
correction and VAR control
Facilitates the view of historian data in various ways
Reduces the labor cost by reducing the staff required for meter
reading

You may also read:

https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 10/12
13/08/2019 What is SCADA? SCADA Systems for Electrical Distribution

Why Power Transmission Cables & Lines are Loose on Electric

Poles & Transmission Towers?
Why Power Plant Capacity Rated in MW and not in MVA?

Enter your Email for Latest Updates like the above one!
Enter Your Email Address:

Subscribe

 Tags Automation Distribution System SCADA

2 Comments

https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 11/12
13/08/2019 What is SCADA? SCADA Systems for Electrical Distribution

Jai Kamal Bhatt

Sir I want to make project on bottle filling in industry using plc & scada. It consist of
various components as smps, plc, motors,etc… so I need a circuit diagram of their
connection, so that it will work without error.

Reply

abduljabbar
Dear sir,
I am very pleasure of your site and use it continue,it is very best for me and have
knowledgeable.
so kindly request you provide me power management software if possible,

Reply

https://www.electricaltechnology.org/2015/09/scada-systems-for-electrical-distribution.html 12/12