Applicant company name: Beijing HollySys Intelligent Technology Co., Ltd.
Applicant address: No.2, Disheng M iddle Road, Economic-Technological Development Area,
Beijing, 100176 P.R.China
Description of the apparatus: LE5109L 24 DI / 16 DO CPU M odule
Trade name/brand name: HollySys
Model/type indication: LE5109L
Intended environment for use: Industrial
Fixed installation: Yes
Hardware version: N/A
Manufacturer company name: Beijing HollySys Intelligent Technology Co., Ltd.
Manufacturer address: No.2, Disheng M iddle Road, Economic-Technological Development Area,
Beijing, 100176 P.R.China
TD reference: LE5109L
WLL project number: WTIL511
Certificate number: E000511
Washington Laboratories is designated as a Notified Body under the
U.S.-EU Mutual Recognition Agreement for EMC Directive 2014/30/EU
Washington Laboratories, Ltd
Notified Body Number 1317
7560 Lindbergh Drive
Gaithersburg, Maryland 20879, United States
In the opinion of WLL, the examination of the Technical documentation (TD) as drawn up by the manufacturer
demonstrates that the requirements, including the essential requirements of Article 6 (Annex I), of EMC Directive
2014/30/EU have been met. The conformity assessment on the apparatus listed above has been carried out in accordance
with Annex III, Part A, Module B, of EMC Directive 2014/30/EU. This EU-type examination certificate relates only to the
documents as provided to WLL. A list of documentation forming the basis for the EU-type examination is provided in
Annex 1 to this EU-type examination certificate.
Notified Body: Issue 1 Date Expiration Date
Michael F. Violette, P.E. 26 September 2019 25 September 2024
Page 1 of 3 EUTYPE004__.RV0
Annex 1 to EU-type examination certificate for EMC Directive 2014/30/EU
TD reference: LE5109L WLL certificate number: E000511
1 Test report: Report number: Dated:
EMC 19WB0827511E Rev. 0 August 27, 2019
2 Technical documentation provided:
Label drawing User manual Circuit diagram/schematics
External photographs Internal photographs Test setup photographs
Test reports
EU declaration of conformity
TD: LE5109L
3 Standards used to demonstrate conformity with the essential requirements of EMC Directive 2014/30/EU:
EMC (Article 6): EN 61326-1:2013, EN 61131-2:2007, EN 61000-6-4:2011, EN 61000-6-2:2005
Page 2 of 3 EUTYPE004__.RV0
Annex 2 to EU-type examination certificate for EMC Directive 2014/30/EU
TD reference: LE5109L WLL certificate number: E000511
4 Additional information:
EMC Directive 2014/30/EU, Article 7.3: Manufacturers shall keep the technical documentation and the EU
declaration of conformity for 10 years after the apparatus has been placed on the market.
EMC Directive 2014/30/EU, Article 7.4: Manufacturers shall ensure that procedures are in place for series
production to remain in conformity with EMC Directive 2014/30/EU. Changes in apparatus design or characteristics
and changes in the harmonized standards or in other technical specifications by reference to which conformity of
apparatus is declared shall be adequately taken into account.
EMC Directive 2014/30/EU, Article 10.5: Manufacturers shall ensure that apparatus which they have placed on the
market bear a type, batch or serial number or other element allowing their identification, or, where the size or nature
of the apparatus does not allow it, that the required information is provided on the packaging or in a document
accompanying the apparatus.
EMC Directive 2014/30/EU, Article 10.6: Manufacturers shall indicate, on the apparatus, their name, registered
trade name or registered trade mark and the postal address at which they can be contacted or, where that is not
possible, on its packaging or in a document accompanying the apparatus. The address shall indicate a single point at
which the manufacturer can be contacted. The contact details shall be in a language easily understood by end-users
and market surveillance authorities.
EMC Directive 2014/30/EU, Article 10.7: Manufacturers shall ensure that the apparatus is accompanied by
instructions and the information referred to in Article 18 of EMC Directive 2014/30/EU in a language which can be
easily understood by consumers and other end-users, as determined by the Member State of the European Union
concerned. Such instructions and information, as well as any labelling, shall be clear, understandable and intelligible .
EMC Directive 2014/30/EU, Article 10.8: Manufacturers who consider or have reason to believe that the apparatus
which they have placed on the market is not in conformity with EMC Directive 2014/30/EU shall immediately take
the corrective measures necessary to bring the apparatus into conformity, to withdraw it or recall it, if appropriate.
Furthermore, where the apparatus presents a risk, manufacturers shall immediately inform the competent national
authorities of the Member States of the European Union in which they made the apparatus available on the market to
that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.
EMC Directive 2014/30/EU, Article 10.9: Manufacturers shall, further to a reasoned request from a competent
national authority, provide it with all the information and documentation in paper or electronic form necessary to
demonstrate the conformity of the apparatus with the EMC Directive 2014/30/EU, in a language which can be easily
understood by that authority. They shall cooperate with that authority, at its request, on any action taken to eliminate
the risks posed by apparatus which they have placed on the market.
EMC Directive 2014/30/EU, Article 17.1: The CE marking shall be affixed visibly, legibly and indelibly to the
apparatus or to its data plate. Where that is not possible or not warranted on account of the nature of the apparatus, it
shall be affixed to the packaging and to the accompanying documents.
EMC Directive 2014/30/EU, Article 17.2: The CE marking shall be affixed before the apparatus is placed on the
market.
5 Contact information:
For contact with WLL or questions regarding this EU-type examination certificate:
Web: www.wll.com e-mail: [email protected] Tel.: (+1) 301 216 1500
Page 3 of 3 EUTYPE004__.RV0
Manufacturer company name: Beijing Hollysys Intelligent Technology Co., Ltd.
Manufacturer address: No.2, Disheng Middle Road, Economic-Technological Development
Area, Beijing, 100176 P.R.China
Description of the apparatus: LE Series Products
Trade name/brand name: HollySys
Model/type indication: LE5106 LE5108 LE5211 LE5223 LE5224 LE5310 LE5330 LE5321
LE5341 LE5403
Intended environment for use: Industrial
Fixed installation: Yes
Hardware version: N/A
TCF reference: 16WB0627193E
ACB project number: ATCB020013
Certificate number: ATCB020013
ACB, Inc. is designated as a Notified Body under the
U.S.-EU Mutual Recognition Agreement for EMC Directive 2014/30/EU
ACB, Inc.
Notified Body Number 1588
6731 Whittier Avenue, Suite C110
McLean, VA 22101, USA
In the opinion of ACB, Inc., the examination of the technical construction file (TCF) as drawn up by the manufacturer
demonstrates that the requirements, including the essential requirements of Article 6 (Annex I), of EMC Directive
2014/30/EU have been met. The conformity assessment on the apparatus listed above has been carried out in accordance
with Annex III, Part A, Module B, of EMC Directive 2014/30/EU. This EU-type examination certificate relates only to the
documents as provided to ACB, Inc. A list of documentation forming the basis for the EU-type examination is provided in
Annex 1 to this EU-type examination certificate.
27 September 2016, Issue 1 26 September 2021
Notified Body: Michael Violette Date Expiration date
Page 1 of 4 EUTYPE201430-160429V2
Annex 1 to EU-Type Examination Certificate for EMC Directive 2014/30/EU
Date of issue: 27 September 2016, Issue 1 Expiration date: 26 September 2021
TCF reference: 16WB0627193E ACB project number/certificate number: ATCB020013
1 Test report: Report number: Dated:
EMC 16WB0627193E Rev. 1 June 27, 2016
2 Technical documentation provided:
Schematics External photographs Internal photographs
Label drawing/location Test reports Test setup photographs
User manual EU declaration of conformity
3 Standards used to demonstrate conformity with the essential requirements of EMC Directive 2014/30/EU:
EMC (Article 6): EN 61000-6-4:2007+A1:2011, EN 61000-6-2:2005+AC:2005,
EN 61326-1:2013, EN 61131-2:2007
Page 2 of 4 EUTYPE201430-160429V2
Annex 2 to EU-type examination certificate for EMC Directive 2014/30/EU
Date of issue: 27 September 2016, Issue 1 Expiration date: 26 September 2021
TCF reference: 16WB0627193E ACB project number/certificate number: ATCB020013
4 Additional information:
EMC Directive 2014/30/EU, Article 7.3: Manufacturers shall keep the technical documentation and the EU
declaration of conformity for 10 years after the apparatus has been placed on the market.
EMC Directive 2014/30/EU, Article 7.4: Manufacturers shall ensure that procedures are in place for series
production to remain in conformity with EMC Directive 2014/30/EU. Changes in apparatus design or characteristics
and changes in the harmonized standards or in other technical specifications by reference to which conformity of
apparatus is declared shall be adequately taken into account.
EMC Directive 2014/30/EU, Article 10.5: Manufacturers shall ensure that apparatus which they have placed on the
market bear a type, batch or serial number or other element allowing their identification, or, where the size or nature
of the apparatus does not allow it, that the required information is provided on the packaging or in a document
accompanying the apparatus.
EMC Directive 2014/30/EU, Article 10.6: Manufacturers shall indicate, on the apparatus, their name, registered
trade name or registered trade mark and the postal address at which they can be contacted or, where that is not
possible, on its packaging or in a document accompanying the apparatus. The address shall indicate a single point at
which the manufacturer can be contacted. The contact details shall be in a language easily understood by end-users
and market surveillance authorities.
EMC Directive 2014/30/EU, Article 10.7: Manufacturers shall ensure that the apparatus is accompanied by
instructions and the information referred to in Article 18 of EMC Directive 2014/30/EU (user manual) in a language
which can be easily understood by consumers and other end-users, as determined by the Member State of the
European Union concerned. Such instructions and information, as well as any labelling, shall be clear,
understandable and intelligible.
EMC Directive 2014/30/EU, Article 10.8: Manufacturers who consider or have reason to believe that the apparatus
which they have placed on the market is not in conformity with EMC Directive 2014/30/EU shall immediately take
the corrective measures necessary to bring the apparatus into conformity, to withdraw it or recall it, if appropriate.
Furthermore, where the apparatus presents a risk, manufacturers shall immediately inform the competent national
authorities of the Member States of the European Union in which they made the apparatus available on the market to
that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.
EMC Directive 2014/30/EU, Article 10.9: Manufacturers shall, further to a reasoned request from a competent
national authority, provide it with all the information and documentation in paper or electronic form necessary to
demonstrate the conformity of the apparatus with the EMC Directive 2014/30/EU, in a language which can be easily
understood by that authority. They shall cooperate with that authority, at its request, on any action taken to eliminate
the risks posed by apparatus which they have placed on the market.
EMC Directive 2014/30/EU, Article 17.1: The CE marking shall be affixed visibly, legibly and indelibly to the
apparatus or to its data plate. Where that is not possible or not warranted on account of the nature of the apparatus, it
shall be affixed to the packaging and to the accompanying documents.
EMC Directive 2014/30/EU, Article 17.2: The CE marking shall be affixed before the apparatus is placed on the
market.
Page 3 of 4 EUTYPE201430-160429V2
Annex 2 to EU-type examination certificate for EMC Directive 2014/30/EU
Date of issue: 27 September 2016, Issue 1 Expiration date: 26 September 2021
TCF reference: 16WB0627193E ACB project number/certificate number: ATCB020013
5 Contact information:
For contact with ACB or questions regarding this EU-type examination certificate:
Web: www.acbcert.com e-mail: [email protected] Tel.: (+1) 703 847 4700
Page 4 of 4 EUTYPE201430-160429V2
Applicant company name: Beijing Hollysys Intelligent Technology Co.,Ltd.
Applicant address: No.2, Disheng Middle Road, Economic-Technological Development Area,
Beijing, 100176 P.R.China
Description of the apparatus: LE Control System
Trade name/brand name: HollySys
Model/type indication: LE5405, MC1901, LE5220, LE5212
Intended environment for use: Industrial
Fixed installation: Yes
Hardware version: N/A
Manufacturer company name: Beijing Hollysys Intelligent Technology Co.,Ltd.
Manufacturer address: No.2, Disheng Middle Road, Economic-Technological Development Area,
Beijing, 100176 P.R.China
TD reference: LE5405, MC1901, LE5220, LE5212
WLL project number: WTIL500
Certificate number: E000500
Washington Laboratories is designated as a Notified Body under the
U.S.-EU Mutual Recognition Agreement for EMC Directive 2014/30/EU
Washington Laboratories, Ltd
Notified Body Number 1317
7560 Lindbergh Drive
Gaithersburg, Maryland 20879, United States
In the opinion of WLL, the examination of the Technical documentation (TD) as drawn up by the manufacturer
demonstrates that the requirements, including the essential requirements of Article 6 (Annex I), of EMC Directive
2014/30/EU have been met. The conformity assessment on the apparatus listed above has been carried out in accordance
with Annex III, Part A, Module B, of EMC Directive 2014/30/EU. This EU-type examination certificate relates only to the
documents as provided to WLL. A list of documentation forming the basis for the EU-type examination is provided in
Annex 1 to this EU-type examination certificate.
Notified Body: Issue 1 Date Expiration Date
8 July 2019 7 July 2024
Michael F. Violette, P.E.
Page 1 of 3 EUTYPE004__.RV0
Annex 1 to EU-type examination certificate for EMC Directive 2014/30/EU
TD reference: LE5405, MC1901, LE5220, LE5212 WLL certificate number: E000500
1 Test report: Report number: Dated:
EMC 19WB0620500E Rev. 0 June 20, 2019
2 Technical documentation provided:
Label drawing User manual Circuit diagram/schematics
External photographs Internal photographs Test setup photographs
Test reports
EU declaration of conformity
TD: LE5405, MC1901, LE5220, LE5212
3 Standards used to demonstrate conformity with the essential requirements of EMC Directive 2014/30/EU:
EMC (Article 6): EN 61326-1:2013, EN 61131-2:2007, EN 61000-6-2:2005/AC:2005, EN 61000-6-4:2007/A1:2011
Page 2 of 3 EUTYPE004__.RV0
Annex 2 to EU-type examination certificate for EMC Directive 2014/30/EU
TD reference: LE5405, MC1901, LE5220, LE5212 WLL certificate number: E000500
4 Additional information:
EMC Directive 2014/30/EU, Article 7.3: Manufacturers shall keep the technical documentation and the EU
declaration of conformity for 10 years after the apparatus has been placed on the market.
EMC Directive 2014/30/EU, Article 7.4: Manufacturers shall ensure that procedures are in place for series
production to remain in conformity with EMC Directive 2014/30/EU. Changes in apparatus design or characteristics
and changes in the harmonized standards or in other technical specifications by reference to which conformity of
apparatus is declared shall be adequately taken into account.
EMC Directive 2014/30/EU, Article 10.5: Manufacturers shall ensure that apparatus which they have placed on the
market bear a type, batch or serial number or other element allowing their identification, or, where the size or nature
of the apparatus does not allow it, that the required information is provided on the packaging or in a document
accompanying the apparatus.
EMC Directive 2014/30/EU, Article 10.6: Manufacturers shall indicate, on the apparatus, their name, registered
trade name or registered trade mark and the postal address at which they can be contacted or, where that is not
possible, on its packaging or in a document accompanying the apparatus. The address shall indicate a single point at
which the manufacturer can be contacted. The contact details shall be in a language easily understood by end-users
and market surveillance authorities.
EMC Directive 2014/30/EU, Article 10.7: Manufacturers shall ensure that the apparatus is accompanied by
instructions and the information referred to in Article 18 of EMC Directive 2014/30/EU in a language which can be
easily understood by consumers and other end-users, as determined by the Member State of the European Union
concerned. Such instructions and information, as well as any labelling, shall be clear, understandable and intelligible.
EMC Directive 2014/30/EU, Article 10.8: Manufacturers who consider or have reason to believe that the apparatus
which they have placed on the market is not in conformity with EMC Directive 2014/30/EU shall immediately take
the corrective measures necessary to bring the apparatus into conformity, to withdraw it or recall it, if appropriate.
Furthermore, where the apparatus presents a risk, manufacturers shall immediately inform the competent national
authorities of the Member States of the European Union in which they made the apparatus available on the market to
that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.
EMC Directive 2014/30/EU, Article 10.9: Manufacturers shall, further to a reasoned request from a competent
national authority, provide it with all the information and documentation in paper or electronic form necessary to
demonstrate the conformity of the apparatus with the EMC Directive 2014/30/EU, in a language which can be easily
understood by that authority. They shall cooperate with that authority, at its request, on any action taken to eliminate
the risks posed by apparatus which they have placed on the market.
EMC Directive 2014/30/EU, Article 17.1: The CE marking shall be affixed visibly, legibly and indelibly to the
apparatus or to its data plate. Where that is not possible or not warranted on account of the nature of the apparatus, it
shall be affixed to the packaging and to the accompanying documents.
EMC Directive 2014/30/EU, Article 17.2: The CE marking shall be affixed before the apparatus is placed on the
market.
5 Contact information:
For contact with WLL or questions regarding this EU-type examination certificate:
Web: www.wll.com e-mail: [email protected] Tel.: (+1) 301 216 1500
Page 3 of 3 EUTYPE004__.RV0
