DC6006L CNC DC adjustable power supply

Product Manual

July 25, 2020

Shen Zhen FEI NI RUI SI TECHNOLOGYCO.,LTD

深圳市菲尼瑞斯科技有限公司
 Shen Zhen FEI NI RUI SI TECHNOLOGYCO.,LTD

Table of Content
1 Product Description..................................................................................................... 1
2 Parameter Description.................................................................................................1
2.1 Basic Parameters...................................................................................................... 1
2.2 Protection mechanism parameters...................................................................... 1
3 Features..............................................................................................................................2
3.1 Interface diagram.....................................................................................................2
3.2 Parameter setting description...............................................................................3
3.2.1 System settings............................................................................................. 3
3.2.2 Software protection settings..................................................................... 3
3.3 Intelligent temperature control system.............................................................. 4
3.4 PD Interface Description........................................................................................ 4
3.5 Other Functions........................................................................................................5
4 Key Description....................................................................................................................5
5 P C s o f t w a r e i n t r o d u c t i o n ........................................................................................6
5.1 Firmware upgrade.................................................................................................... 7
5.2 Control operation.....................................................................................................7
6 Precautions...........................................................................................................................8

I
 Shen Zhen FEI NI RUI SI TECHNOLOGYCO.,LTD

1 Product Description

DC6006L programmable digital controlled step-down DC adjustable

power supply is small in size, comprehensive in input interface, stable

in performance, high in precision and high in efficiency, and contains

a variety of humanized system settings. Adopting 1.44-inch LCD

high-definition display, one screen displays a variety of data, the page

is simple and rich.

2 Parameter Description

2.1 Basic Parameters

1. Input voltage: Banana head 6-70V input;DC 6-30V input;PD 80W input.

2. The Output voltage: 0-60V (note: ensure that the input voltage is

greater than 1.1 times the output voltage)

3. Output current: 0-6A;

4. Output power: 0-360W;

5. Voltage resolution: 0.01V, precision: ± 0.3%+3;

6. Current resolution: 0.001A, precision: ± 0.5%+5;

7. Output ripple: 100mV peak-to-peak value .

2.2 Protection mechanism parameters

1. T h e i n p u t p r e v e n t s r e v e r s e co n n e c t i o n , t h e o u t p u t p r e v e n t s

short connection to prevent backflow, and can

1
 Shen Zhen FEI NI RUI SI TECHNOLOGYCO.,LTD

charge the battery ( distinguish between positive

and ne g a t i v e )

2. Output overvoltage protection (OVP): 0V-61V custom adjustment,

default 61V;

3. Output overcurrent protection (OCP): 0-6.1A custom adjustment,

default 6.1A;

4. Output over power protection (OPP): 0-360W custom adjustment,

default 360W;

5. Output over temperature protection (OTP): 45-120 ℃ self-defined

adjustment, closed by default;

6. Output overtime protection (OHP): 0-100h custom adjustment, closed

by default;

7. Turn on default (ACQ): Off by default;

3 Features

3.1 Interface diagram

2
 Shen Zhen FEI NI RUI SI TECHNOLOGYCO.,LTD

3.2 Parameter setting description

3.2.1 System settings

1. Default Switch： Set the power-on device to turn on or turn off the

output by default;

2. Sy st em la n g u a g e : swi tc h be t w e e n En g l i s h and Ch i n e s e ;

3. Timing screen off: set the screen to automatically turn off at a

specified time, the maximum support 100h;

4. D i s p l a y d i r e c t i o n : se t the d i r e c t i o n of 360 d e g r e e r o t a t i o n ;

5. Temp erature unit: Set the temperature unit (℃ or ℉ ).

3.2.2 Software protection settings

During the operation of the equipment, once the software protection

mechanism is triggered, the output of the equipment is disconnected and the

buzzer will beep for a long time, and the corresponding mechanism code will be

alarmed. Press the switch key and the knob again to release the alarm and return

3
 Shen Zhen FEI NI RUI SI TECHNOLOGYCO.,LTD

to the normal state.

1. Over Voltage ： Set the threshold voltage, and alarm OVP when the output

voltage exceeds the set voltage;

2. Over Current ： Set the threshold current, and alarm OCP when the output

current exceeds the set current;

3. Over Power：Set the threshold power, and alarm OPP when the output power

exceeds the set power;

4. Over Temp ： Set the threshold temperature, and alarm OTP when the device

temperature exceeds the set temperature

5. Timeout：Set the threshold time, when the output time exceeds the set time,

it will alarm OHP;

3.3 Intelligent temperature control system

When the product temperature is greater than 40° C or the output current is

greater than 2A, the fan automatically starts, and the fan automatically shuts off

when the conditions are not met.

3.4 PD Interface Description

The PD interface compatibility of this device is not very comprehensive,It is not

guaranteed to be compatible with all PD chargers,Fix the PD gear of 20V voltage.

If the charger does not support the 20V gear,Will outputthe voltage of the first

gear,Maximum load is 80W (due to the influence of PD charger and CC line, it may

be lower than 80W,Most CC lines on the market support up to 3A,Need to support

the CC line of the Emarker chip to be larger than 3A)

4
 Shen Zhen FEI NI RUI SI TECHNOLOGYCO.,LTD

3.5 Other Functions

Long press the switch button to realize one- key turn- off and one- key bright

screen operation,When the screen is off, the keys are locked to prevent accidental

touch;Supports quick recall of CNC setting parameters;Support PD charger and DC

DC power adapter for direct power supply;It also supports a series of functions

such as PC software upgrade and control.

4 Key Description

Knob operation is used to switch pages and adjust values. Other key

operations are as follows.

Knob ON/OFF V/A ＜ ＞

Cutover Set up
Confirm Switch Previou Next
Short press Voltage and
or clear output s page page
current

Screen Switch Switch

5
 Shen Zhen FEI NI RUI SI TECHNOLOGYCO.,LTD

5 PC software introduction

After the DC6006L is powered on, connect to the computer through the

MICRO USB interface, select the corresponding serial port number (if the serial

port number is not found, please check whether the computer is installed with

the CH340 driver), and then open the serial port, click to connect the device, the

message window will prompt whether the connection is successful, connect After

success, the corresponding product model will be updated in the lower left corner

of the page.

6
 Shen Zhen FEI NI RUI SI TECHNOLOGYCO.,LTD

5.1 Firmware upgrade

Warning: Please disconnect any load when connecting to PC for software

upgrade!After opening the PC software to connect the device,After selecting the

correct latest device firmware file and data packet length ( Free Choice),Just

proceed with the firmware upgrade operation. Do not power off the device during

the upgrade process.It will cause the upgrade to fail and cause the device to

crash.

If the upgrade fails accidentally, please disconnect the power and press and hold

the ">" button to power on the device.

Try to re- enter the upgrade mode and turn on the upper computer again to

upgrade the firmware.After the firmware upgrade is successful, the device will

automatically run the latest firmware and the PC software will restart.

5.2 Control operation

First, you must open the correct serial port number before the connect device

button will take effect.When operating the host computer, all control input boxes

cannot be empty,And only numbers and decimal points can be entered ( the

decimal point can only be entered in a specific position to take effect,For example,

voltage 10 . 00 , current 3 . 000 , power 360 . 0 ),The setting will not take effect

until the cursor leaves the input box.

The waveform can be observed by the waveform status light,to determine

whether the waveform status is acquired in real time( Green represents acquiring

data waveform, red represents pause to acquire data waveform), The “ start/

pause” next to the waveform can control the waveform status light,The waveform

can also be zoomed in by selecting the designated area with the left mouse

7
 Shen Zhen FEI NI RUI SI TECHNOLOGYCO.,LTD

button, You can watch the waveform more intuitively, If you want to analyze the

data for a period of time, click the save button next to the waveform, The DC-

Date. xlsx file will be automatically generated on the desktop

, just open the file for data analysis.

6 Precautions

1. This product is a step- down digitally controlled adjustable power supply, and

the output power of the input DC source equipment must be higher than 1 . 1 times

the operating power of the load equipment;

2. Before charging the lithium battery with constant current, please check the

battery parameters, and after setting the voltage and current, distinguish the

positive and negative poles connected to the battery to start charging;

3. VIN- and OUT- are forbidden to be shorted or wrongly connected, otherwise

the CC mode will fail;

4. When using PC software to upgrade, please disconnect the load, and then

connect the PC software.

5. Multiple input interfaces cannot be connected at the same time, only one

input interface can be connected ;

6. Please read the product parameters carefully before using .