in collaboration with

FMM Institute Institute of Materials Malaysia

PROGRAMME

8.30 am - 9.00 am Registration of Participants

9.00 am - 9.10 am Welcome Remarks
by General Manager, FMM Institute
9.10 am - 9.20 am Opening Remarks
by President, Institute of Materials Malaysia
9.20 am - 10.30 am The Importance of Vibration Technology from the Efficiency and Productivity’s
Perspective
by YBhg. Dato’ Dr. Ir. Haji Mohd Abdul Karim Abdullah
Deputy Chairman, IMM Vibration Committee
10.30 am - 10.45 am Tea Break & Networking
10.45 am - 1.00 pm An Overview of Principles of Vibration, Displacement and Natural Frequency
by Associate Professor Dr. Rahizar Ramli, Department of Mechanical Engineering,
Faculty of Engineering, University of Malaya
1.00 pm - 2.00 pm Lunch & Networking
2.00 pm - 3.45 pm An Overview of Data Acquisition and Signal Processing
by Dr. Ong Zhi Chao, Senior Lecturer, Department of Mechanical Engineering,
Faculty of Engineering, University of Malaya
3.45 pm - 5.15 pm Case Studies of Common Vibration Problems in Machinery and Its Impact on
Production
by Associate Professor Dr. Rahizar Ramli, Department of Mechanical Engineering,
Faculty of Engineering, University of Malaya
5.15 pm - 5.30 pm Tea Break & End of Seminar

OBJECTIVES WHO SHOULD ATTEND?

 To highlight the impact of vibration management on Managers, Engineers, Safety Officers, Supervisors,
health, safety and environment Technicians and Business Owners who are concerned
 To create an awareness about vibration technology and about economic, productivity, health, safety and
its effects on efficiency and productivity environmental aspects of their manufacturing operations.
 To create a strong interest in vibration management
subject and its significant benefits on economic, health,
safety and environment for those in the manufacturing
sector

PARTICIPATION FEES
FMM Members: RM265 per participant (inclusive of GST) ; Non-Members: RM318 per participant (inclusive of GST)
———— HRDF Claimable ————

ADMINISTRATIVE DETAILS
Date: April 20, 2016 (Wednesday) Contact Persons: Ms Ong Li Choo / Pn Siti Nazihah /
Time: 9.00 am - 5.30 pm Pn Shimah
Venue: Wisma FMM, No 3 Persiaran Dagang Tel: 03-6286 7200
PJU 9, 52200 Bandar Sri Damansara Fax: 03-6277 6712
Kuala Lumpur E-mail: [email protected]
SPEAKERS
YBhg. Dato’ Dr Ir. Haji Mohd Abdul Karim Abdullah is the Deputy Chairman of the Vibration
Committee of the Institute of Materials Malaysia. In his personal capacity, he is the Group President and
Chief Executive Officer of Serba Dinamik Sdn Bhd. He graduated with Bachelor in Mechanical Engineering
from Universiti Teknologi Malaysia and later on obtained his Doctor of Philosophy in Entrepreneurship
from Golden State University. He has more than 27 years of hands-on experience in managing,
supervising, lecturing and carrying out various tasks related to turbomachinery maintenance nationwide
and internationally. He was involved in the field management and supervision for overhauling of steam
turbines, gas turbines, centrifugal compressors and pumps of various brands and was responsible for the
project control function in the planning and scheduling to maintain the planned work and production
schedule. He also analysed schedule impacts resulting from design alternatives, field change and site
condition encountered and revised the project schedule if needed. Currently, he is in charge of planning,
recruiting and managing human resources for various plant shutdown and maintenance works while
representing the group of companies in corporate management, construction and fabrication projects.

Dr. Rahizar Ramli is an Associate Professor at the Department of Mechanical Engineering, Faculty of
Engineering, University of Malaya. He received his Bachelor of Science (Mechanical) from the University
of Hartford, U.S.A. in 1992. Since then, he worked as a Technical Service engineer in the area of vibration,
and condition monitoring. He was awarded with Masters (M.Eng.Sc.) degree from the University of Malaya
in 1999 for his research in Structure-borne Noise in Passenger vehicle. In 2007, he obtained his Ph.D at
the University of Leeds, UK specialising in computational mechanics involving vehicle dynamics,
semi-active control systems, and durability analysis for vehicle suspension systems. He has more than 23
years of experience in the areas of vibration, dynamics and acoustics. This includes implementing
Vibration Condition Monitoring programs for many processing plants, power plants, and oil and gas
industries throughout South East Asia. He has numerous experiences in machinery diagnostics using
vibration analysis and structural dynamics for various industrial applications apart from occasionally
conducting training on vibration analysis for engineers and technicians. He is currently the Lead Trainer for
Vibration Practitioner / Specialist Certification Programmes Based on ISO 18436 (Level 1 to 4).

Dr. Ong Zhi Chao is a Senior Lecturer at Department of Mechanical Engineering, Faculty of Engineering,
University of Malaya. His expertise includes vibration, modal analysis, virtual instrumentation and signal
processing. He is active in research and developed a new vibration testing technique named as
Impact-Synchronous Modal Analysis (ISMA) which has been implemented in teaching, research and real
industrial cases. For the past 8 years, he was involved in numerous industrial projects on machinery
vibration at both on-shore and off-shore petrochemical and oil and gas processing plants in Malaysia. He
also has experiences in conducting machinery vibration training courses for engineers and technicians
from oil and gas industry.
 REGISTRATION FORM

Seminar on Vibration Monitoring and Management

April 20, 2016 (Wednesdsay) Wisma FMM, Bandar Sri Damansara, Kuala Lumpur
The Manager
FMM Institute Please tick () accordingly:
Tel: 03-6286 7200 Fax: 03-6277 6712 PSMB Scheme: SBL Non Contributor
Email: [email protected]
Required vegetarian meal: Yes No
Dear Madam,
Please register the following participant(s) for the above programme:
(To be completed in BLOCK LETTERS)
1. Name Designation E-mail

________________________________________________________________________________________________

Nationality IC No.

________________________________________________________________________________________________

2. Name Designation E-mail

________________________________________________________________________________________________

Nationality IC No.

________________________________________________________________________________________________

3. Name Designation E-mail

________________________________________________________________________________________________

Nationality IC No.

________________________________________________________________________________________________
(if space is insufficient, please attach a separate list)

Enclosed cheque/bank draft No. ________________________________ for RM _________________________________

Being payment for ___________________ participant(s) made in favour of the “FMM Institute”.

Submitted by:
Name: _____________________________________________________________________________________________

Designation: ___________________________________ E-mail: ______________________________________________

Company: _______________________________________________________ FMM Membership No.: ______________

Address: ___________________________________________________________________________________________

__________________________________________________________________________________________________

My Corporate Identity No.: _____________________________ GST Registration No. : ____________________________

Tel No.: ___________________________ Fax No.: ___________________________ Date: ________________________