Multiflo® Mudflo™ 150

Hydraulic Submersible Slurry Pump

Technical Specifications Minerals

Pump Features
• Ultrachrome® A05 chrome alloy casting for
high wear resistance

• Hydraulic motor sizing available to handle

a range of high density liquids

• High solids handling capability

• Bespoke suction strainer to prevent

clogging in applications where very large
solids are present

• Capable of pumping between 150m3/h and

680m3/h, up to 72m head

• Quick-hitch plate attachment available

for ease of removal and installation on
hydraulic excavators

Left: Multiflo® Mudflo™hydraulic

submersible dredge pump

Heavy duty hydraulic submersible slurry Cutter Features

• Twin hydraulic cutters with ESCO®
pump engineered for abrasive applications Ground Engagement Technology (GET)
for industry-leading wear life and impact
resistance
The Multiflo® Mudflo™submersible dredge pump features a hydraulically driven
wet-end especially engineered to provide efficient pumping of highly charged • Each cutter features six ESCO® standard
and abrasive slurries. A combination of Weir Minerals' Ultrachrome® A05 point teeth with Ultralok® tooth system
chrome alloy casting for high wear resistance, and a suction strainer to prevent
• Integrated lock means no pins to order,
excessively large particles clogging the pump, ensures high levels of uptime.
lose or mismatch
The Mudflo™ 150 pump is capable of pumping between 150 and 680m3/h, up to
72m head. • Points are easily installed and safely
removed with a standard site fitter pry
The two included Multiflo® CB32 cutters are fitted with ESCO® teeth that tools
utilise the two-piece Ultralok® tooth system to prevent premature breakage,
avoid tooth loss and protect the integral locking system to ensure continuous • Variable speed cutters for optimal
operation
operation of the pump.
The Multiflo® MudfloTM pump is suitable for multiple dredging applications
Multiflo® CB32 cutter hydraulic motor data
including;
Motor displacement (cc) 714
• Tailings storage facility management Max. oil flow rate (l/min) 36
• Harbour and marine maintenance
Max. oil pressure (bar) 250
• Sand and gravel mining
• Maintenance of water storage capacity in retention ponds Max. power (kW/HP) 15/20
• Slimes removal from sludge ponds Max. speed (rpm) 50
• Land reclamation
 Multiflo® Mudflo™ hydraulic submersible slurry pump specifications
MULTIFLO® MUDFLO™ 150 PUMP
Capacity (m³/h) 680
Head (m) 72
Impeller diameter (mm/Type) 378 / 3 Vane Closed
Suction DN200, Warman® Pattern
Discharge DN150, Warman® Pattern
Max solid concentration (%wt) up to 65
Max particle size (mm) 80
Max liquid temperature 35°C
Casing material A25 steel alloy
Impeller material Ultrachrome® A05
Motor housing material EN-GJL-250 (EN 1561)
Shaft material E05 – K1045 Carbon Steel
Bearing housing material D21 – Ductile Cast Iron
Weights and Dimensions (pump and cutters)
Dimension H (mm) 1936
Dimension W (mm) 1800
Dimension A (mm) 352
Dimension B (mm) 415
Dimension D (mm) 850
Weight (kg) 2500
Pump Hydraulic Motor Data Low Power Option High Power Option
Motor displacement (cc) 160 250
Max. oil flow rate (l/min) 233 450
Max. oil pressure (bar) 350 350
Max. power (kW/HP) 169/227 263/352
Max. speed (rpm) 1800 1800

Multiflo® Mudflo™ 150 Pump Performance Curves

Q (US gpm)
1000 2000 3000 4000

1800rpm
Awaiting
80 new tombstone curve
250

70 1600rpm

200
60

1400rpm
50 Recommended
H (m)

operating range
H (ft)

150

40 1200rpm

30 100
1000rpm
Top: Multiflo® Mudflo™hydraulic
submersible pump rear perspective 20 800rpm
50
®
Middle: Multiflo Mudflo™hydraulic
10
submersible pump dimensions

Bottom: ESCO® standard point with 0 0

150 300 450 600 750 900
bolt-in lock
Q (m3/h)

Weir Minerals

[email protected] Copyright © 2021 Weir Minerals Australia Ltd. All rights reserved. The trademarks mentioned in this document are trademarks and/or
www.global.weir registered trademarks in the name of The Weir Group PLC and/or its subsidiaries. WMD1199/052021