Scribd
Upload
110 views1 page

Features: Class A Network Stack Class C Network Stack

The document describes the Melange Systems TarangMiniTM SM20LRxx series Sub-GHz wireless modules. The modules use Semtech's LoRa platform and an integrated ARM processor, and support various wireless networking topologies. They are designed for low power and small form factor to provide wireless capabilities for IoT applications like smart metering and industrial automation.

Uploaded by

Prasad Chabbi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
110 views1 page

Features: Class A Network Stack Class C Network Stack

The document describes the Melange Systems TarangMiniTM SM20LRxx series Sub-GHz wireless modules. The modules use Semtech's LoRa platform and an integrated ARM processor, and support various wireless networking topologies. They are designed for low power and small form factor to provide wireless capabilities for IoT applications like smart metering and industrial automation.

Uploaded by

Prasad Chabbi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TM

Melange Systems TarangMiniTM SM20LRxx series Sub-GHz wireless


modules are specialized to fulfill the last mile connectivity requirements
in the IoT applications. SM20LRxx series module uses Semtech’s popu-
lar LoRa® platform and has an integrated ARM® Cortex® processor.
With Melange Systems Tarang software eco system in place, users get
the flexibility to choose between multiple software stacks appropriate
for their application. These cost effective, low power modules are built
in a small form-factor and has very simple interfacing options to pro-
vide wireless capabilities to any existing embedded products.
SM20LRxx module has provision to mount different antenna types and
allow SMD or through-hole mounting provisions

Features

• Supports Melange Systems proprietary Tarang- • Features standard UART port to interface with a
Net (for point to point, point to multi-point)
TM host controller and supports configurations via
and PrettyMeshTM (for mesh network) topologies simple AT commands and APIs

• Supports LoRaWANTM Class A network stack • Field configurable baud-rate, RF output power
and operating channel
• Supports LoRaWANTM Class C network stack
• Options to mount spring antenna/external an-
• Supports 6LoWPAN networking topologies *
tenna with pigtail connector/MMCX connector
• Ultra low power sleep capabilities for the battery
• Supports over the air configuration and over the
operated applications
air programming **
• Best suited for smart water metering, industrial
• SMD or Through-hole mounting provisions
automation and street lighting applications
* Under development ** For selected software stacks
Specifications

Supply Voltage : 3 to 3.6 V Operating Frequency : 865 to 867 MHz

Transmit Current : Less than 130 mA at 19 dBm Transmit Power : Configurable up to 20 dBm

Idle / Receive Current : Less than 25 mA Receiver Sensitivity : -127dBm (at 1kbps)

Deep-sleep Current : Less than 3 uA Operating Temperature : -10 to 70 degree C

PCB Interface : 2 mm pitch Pads / Pins (18 ) PCB Dimensions : 25(L) x 22.5(W) x 2.5(H) mm

#4/1, 7th Cross, Kumara Park (West)


Bangalore, Karnataka, India - 560020
Melange Systems Pvt Ltd
Wireless controls in action Phone: +91-80-23561023
Fax: +91-80-23462175
E-mail: [email protected]

Note: Melange Systems reserves the right to change any of these specification without notice as a part of continuous product improvement
© 2016 Melange Systems Pvt Ltd

w w w . m e l a n g e s y s t e m s . co m

You might also like