hino.com.

au

FD 1124 Manual
FD 1124 Automatic
FD 1124 Automated Manual

*Image may contain items not standard to the model 4 x 2 Cab Chassis

KEY FEATURES KEY SPECIFICATIONS

Vehicle Stability Control (VSC) – Including ABS & TC GVM . . . . . . . . . . . . . . . . . . . . . . . . . 11,000kg
Pre-Collision System (PCS) – Including SE, AEB & PD . . . . . . . . . . . . . . . . . . . . . . . . . .8,000kg Option
Lane Departure Warning System (LDWS) GCM . . . . . . . . . . . . . . . . . MT and AT . . 20,000kg
Adaptive Cruise Control (ACC) . . . . . . . . . . . . . . . . . . . . AMT . . . . . 16,000kg
Engine Retarder Brake (Jake brake) Power . . . . . . . . . . . . . . . . . . . . . . 240hp/177kW
Reverse Camera Torque . . . . . . . . . . . . . . . . . . . . . . . . . .794Nm
LED headlamps with integrated LED daytime running lamps Transmissions . . . . . . . . . . . . . . . . 6 speed Manual
Drivers SRS Airbag . . . . . . . . . . . . . . . . . . . . . . . . 6 speed Automatic
ISRI 6860 NTS2 Drivers seat with integrated safety belt . . . . . . . . . . . . . . . . . . . . 6 speed Automated Manual
ECE-R29 Cab Strength Certified Wheelbases . . . . . . . . . . . . . . 4.3m, 4.9m, 5.2m, 5.5m
post Post New Long Term (pPNLT) Max Nominal
(Euro 6 equivalent emissions) Body Length . . . . . . . . . . . . . 5.8m, 6.8m, 7.2m, 7.8m

A Toyota Group Company

ENGINE POWER & TORQUE CHART (ISO Net) A05C-TE
Model Hino A05C-TE A05C-TE
Max. output (ISO NET) 240hp/177kW @ 2,300RPM
Max. torque (ISO NET) 794Nm @ 1,400RPM OUTPUT (kW) TORQUE (N-m)
Max. engine RPM 2550RPM 200
177kW/2300RPM
Engine compliance ADR 80/03 using Japan pPNLT (hp) (240hp/2300RPM)
240
180 1000
Diesel, turbocharged & intercooled 4 cylinder
Type
with overhead camshaft 220 160 800
Combustion system Direct injection with EGR
200 794N-m/1400RPM
Bore & stroke 112 x 130mm 140 600
Piston displacement 5.123L
180
Compression ratio 17.5:1 160 120 400
Fuel injection Electronic control common rail 140 100
Air compressor / bore & stroke Single cylinder / 70 x 40mm 120
Air cleaner Dual paper elements 80
Exhaust Horizontal outlet RHS
Emission Control System DPR & SCR (AdBlue®)
2300
Hino Stop Start System (HSSS) AMT & MT models only
1000 1400 1800 2200 2600
Engine Immobiliser Equipped
ENGINE SPEED (RPM)
CLUTCH (Manual models only)
SAFETY FEATURES
Model CSP-350 (DSP 350 AMT)
Active Safety Features
Type Dry single plate
Clutch plate 350mm Organic Vehicle Stability Control VSC Equipped
Control Hydraulic with air booster Anti-lock Brake System ABS Equipped
Pre-Collision System PCS Equipped
TRANSMISSION & GEAR RATIOS Safety Eye SE
PCS is inclusive of Autonomous Emergency Braking AEB
Manual & AMT Automatic
Pedestrian Detection PD
Hino LX06S, 6 speed
Allison 2500, 6 speed Traction Control TC Equipped
Make and description synchromesh with cable
with Hino T-bar cable shift
shift & air assist Lane Departure Warning System LDWS Equipped
and MID gear display
(AMT is electronic control) Staggering Warning SW Equipped
Type Overdrive Double overdrive Adaptive Cruise Control ACC Equipped
1 6.098 1 3.512
Reverse Camera RC Equipped
2 3.858 2 1.896
Easy Start hill assist ES Equipped (AMT & MT models only)
3 2.340 3 1.439
Passive Safety Features
Gear Ratios 4 1.422 4 1.000
SRS airbag for driver Equipped
5 1.000 5 0.737
6 0.744 6 0.643 SRS Seat belt pretensioner for driver Equipped
Reverse 5.672 Reverse 5.086 Front Underrun Protection device
Equipped
(FUPD)
Torque convertor & ratio TC222 1.58
Rear axle ratio 4.625 4.333 ECE-R29 Cab Strength Certified Equipped
PTO option/Torque capacity Single/245Nm Dual/339Nm
SUSPENSION & LOAD LIMITS
PERFORMANCE Front axle model LF 456
Calculations based on 11t GVM with 235/75R17.5 tyres Front axle type I-Beam, reverse elliot
Engine RPM @ 100km/h 2,374 1,922 Suspension Taper leaf springs with shock absorbers and stabiliser
Max theoretical speed (km/h) 108 134 Spring Dimensions 1300 x 70mm
FRONT

Gradeability tan (%) @ GVM 55.8 45.5 Number 3

Spring rate (kgf/mm )
2
23.0
BRAKES
Axle limit (including suspension) 4,100kg
Type Drum brakes front and rear Tyre limit 4,000kg
Control Air Over Hydraulic (AOH), Dual circuit Rear axle model SH13
Front 320 x 110mm Rear axle type Fully floating, single reduction by hypoid gears
Drum diameter x lining width
Rear 320 x 120mm Rear suspension types Leaf Air
Air Dryer Equipped
Suspension description Multi leaf with auxiliary
Vehicle Stability Control (VSC) Equipped Hendrickson HAS 200
Spring dimensions Main Auxiliary
REAR

Pre-Collision System (PCS) Equipped with shock absorbers and

Length and width (mm) 1,300 x 70 900 x 70
Anti-lock Brake System (ABS) Equipped mechanical ride height
Traction Control (TC) Equipped Number 8 9 valve
Park brake Spring brake acting on rear wheels Spring rate (kgf/mm )
2
25 74
Easy Start (ES) Equipped on AMT & MT models Axle limit (including suspension) 7,000kg
Exhaust & engine brake (Jake Brake) Equipped Tyre limit 7,600kg
CHASSIS FRAME CAB DETAILS
FD2AL, FD2AM Forward control, rest cab, all steel construction with
Chassis frame wheelbase variants FD2AJ Type
and FC2AP torsion bar tilt mechanism
Main section in mm Grille colour Chrome plate
228.4 x 73 x 5.2 231.6 x 73 x 6.8
(depth x flange x thickness)
ADR 42 sleeper berth Compliant
Chassis width (at rear) 820mm
Seating capacity 3
Tensile strength 540 N/mm2 (55 kgf/mm2)
ISRI 6860 NTS2 air suspension, 10 way adjustable
Front Underrun Protection Device Drivers seat
Equipped with integrated safety belt and rear pocket
(FUPD)
Side passenger seat High back and reclining seat
Tow hook capacity (front and rear) 2,000 kgf (max angle of 15°)
Centre seat Foldaway type with integrated tray
Type Ladder-shaped channel section side rails
3 point lap sash for driver and side passenger
Seat belts
2 point lap for centre position
WHEELS & TYRES
Sunvisor and overhead console For driver and passenger sides
Wheel type 6 stud disc wheel (JIS type) PCD 222.25 Windscreen wipers 2 arm wiper and washers, 2 speed with intermittent
Rim size 6.75 x 17.5 with 135 mm offset Cab heater and air conditioner Equipped with 4 speed fan
Tyre size 235/75R17.5 132/130 External : Electric & heated, 2 flat type
Rear view mirrors
Number of tyres 7 including the spare 2 convex spotters & kerb view
Spare tyre carrier Equipped Auxiliary power supply 12 volt 120W socket and USB 2.1 amp
Floor covering Vinyl type
FUEL TANK Central locking and keyless entry Equipped with immobiliser
Material Steel Cab storage pockets Equipped in both side doors
Fuel capacity 200L Power windows Equipped
Lockable fuel cap Equipped Foot rest Equipped
Prefilter & sedimenter Equipped Cup holders 3 centre and 2 door beverage holders
Adblue® capacity 19L 6.5” LCD, HD touch screen display with DAB+ AM/
Multimedia System FM radio, AUX input, Bluetooth®4.1, Android 6.0,
CANBUS connected and Wi-Fi enabled
ELECTRICAL
Type 24 volt negative earth
INSTRUMENTATION
12 volt x 2 (65D23L) AT Models
Batteries
12 volt x 2 (80D26L) MT & AMT models Meters Steering wheel controls
Alternator capacity 24 volt x 90 amp Speedometer Cruise control
Starter type 24 volt x 4.5kW Tachometer MID controls
Headlamps LED main beam with LED daytime running lamps Air Gauges Additional switches and controls
LED cornering/Fog lamps Equipped LCD display External flat mirror control
LED Interior and reading lamp Equipped Time VSC off
Electric air horn Equipped Temperature Gauge PCS off
Equipped J1939 protocol Adblue® Gauge LDWS off
CANBUS connected
(see BMM for details)
Fuel Gauge Idle up
Odometer Quick warm up
STEERING
Hour Meter ES start control (AMT & MT models only)
Telescopic and tilt steering column with locking Date & Day Mirror heater
Type device. Recirculating ball with integral power
Multi Information Display (MID) Engine brake
steering.
General information Power and economy (AMT & AT models only)
Gear ratio 19.0:1
Cruise Control setting DPR regeneration
Steering angles Inside 53° Outside 38°
Eco Tree Hino Stop Start (AMT & MT models only)

GENUINE ACCESSORY OPTIONS Display setting Electric window lock out

Safe driving settings Head light leveller
Bull bar options (see dealer for variants) Phone charge mat
System Check ECO Run (AMT & MT models only)
Dash mat Lane change assist cameras
Gear position (AT models only) Suspension Dump (Air suspension models
Sunvisor Truck specific GPS nav with live traffic only)
Chrome wheel simulators DVR Camera system (Dash Cam)
Seat covers Hino Traq telematics
Floor mats Tyre Pressure Monitoring System (TPMS)
Engine live drive PTO (343Nm @ 1:1) Additional cameras (up to 3)
FD 1124 Manual
FD 1124 Automatic
FD 1124 Automated Manual
DIMENSIONS – mm/WEIGHTS – kg
Model FD 1124
Transmission Manual Automatic AMT
Suspension Leaf Air Leaf Air Leaf
Wheel base (WB) 4,290 4,890 5,190 5,540 4,890 5,190 5,540 4,290 4,890 5,190 5,540 4,890 5,190 5,540 4,890
Product FD2AJ1A FD2AL1A FD2AM1A FD2AP1A FD2AL1G FD2AM1G FD2AP1G FD2AJ1A FD2AL1A FD2AM1A FD2AP1A FD2AL1G FD2AM1G FD2AP1G FD2AL1A
Code -DBCAE -DBCAE -DBCAE -DBCAE -DBCAE -DBCAE -DBCAE -DXCAE -DXCAE -DXCAE -DXCAE -DXCAE -DXCAE -DXCAE -DMCAE
OL 7,285 8,135 8,635 9,145 8,135 8,635 9,145 7,285 8,135 8,635 9,145 8,135 8,635 9,145 8,135
OW 2,190
OH 2,450 2,440 2,450 2,440 2,450
CA 3,365 3,965 4,265 4,615 3,965 4,265 4,615 3,365 3,965 4,265 4,615 3,965 4,265 4,615 3,965
FOH 1,145
ROH 1,810 2,060 2,260 2,420 2,060 2,260 2,420 1,810 2,060 2,260 2,420 2,060 2,260 2,420 2,060
RCH (at axle) 860 780 860 780 860
FT 1,780
RT 1,660
Kerb to Kerb 13,600 15,400 16,200 17,200 15,400 16,200 17,200 13,600 15,400 16,200 17,200 15,400 16,200 17,200 15,400
Wall to Wall 15,000 16,800 17,600 18,600 16,800 17,600 18,600 15,000 16,800 17,600 18,600 16,800 17,600 18,600 16,800
Indicative Chassis Mass – kg (10 litres of fuel, no tools or spare tyre & subject to a ±3% tolerance
Total 3,425 3,520 3,565 3,585 3,520 3,560 3,585 3,445 3,560 3,585 3,605 3,560 3,580 3,605 3,550
Front 2,335 2,390 2,415 2,425 2,405 2,425 2,440 2,355 2,420 2,435 2,450 2,435 2,445 2,460 2,410
Rear 1,090 1,130 1,150 1,160 1,115 1,135 1,145 1,090 1,140 1,150 1,155 1,125 1,135 1,145 1,140
GVM 11,000 (optional 8,000 available on application
GCM 20,000 16,000

CA

RCH
OH
OW FT 820 RT

FOH WB ROH
OL
Drawings are for reference only to the table. For specific chassis layouts and dimensions please refer to Body Mounting Manual drawings.

WARRANTY
New vehicle warranty period

Standard warranty
Medium Duty Model Axle configuration Cab corrosion perforation
(whichever comes first)

500 FD 1124 4x2 3 years or 150,000km 36 months

Battery warranty – 12 months from date of delivery Genuine parts or accessories warranty – 3 years unlimited kilometres when fitted by an authorised Hino dealer *
* For conditions, refer to the Hino Parts & Service warranty brochure

SERVICE
AGREEMENT

DISCLAIMER
HSMY19FD1124-1118

Important notice – Hino Trucks are distributed in Australia by Hino Motor Sales Australia Pty Ltd A C N 064 989 724. All efforts have been made to ensure the information contained in this brochure was correct at time
of printing or uploading. Hino Motor Sales Australia Pty Ltd reserves the right to alter any details of the specifications and equipment without notice. Hino in so far as it is permitted by law to do so, shall not be liable in
any way as a result of any reliance placed by any person on anything contained in this brochure. You should therefore check with your authorised Hino dealer at the time of ordering your motor vehicle to ensure that
colour, specifications, equipment, design features and options are available for the vehicle you are ordering. Please note that some options may only be available in combination with others. Authorised Hino dealers will
on request provide up to date information on all accessories, design features, prices & availability.

A Toyota Group Company

Safer Greener Essential